Jim Blandy [Wed, 24 Oct 2001 17:10:18 +0000 (17:10 +0000)]
Isolate STABS readers' use of the `textlow' and `texthigh' fields
of `struct partial_symtab' to only a few locations. This change
is not supposed to affect the way the values are computed, only
where they live.
* dbxread.c (struct symloc): Add `textlow' and `texthigh' fields
to the reader-specific structure.
* mdebugread.c (struct symloc): Same.
* dbxread.c (TEXTLOW, TEXTHIGH): New accessor macros.
* mdebugread.c (TEXTLOW, TEXTHIGH): Same.
* dbxread.c (dbx_symfile_read): After we've built all our partial
symbol tables, set each partial symtab's `textlow' and `texthigh'
fields from our reader-specific structure.
* mdebugread.c (mdebug_build_psymtabs): Same.
* dbxread.c (start_psymtab): Initialize the reader-specific
structure's `textlow' and `texthigh' from the new psymtab's.
* mdebugread.c (parse_partial_symbols, new_psymtab): Same.
* dbxread.c (read_dbx_symtab, end_psymtab, read_ofile_symtab): Use
the reader-specific `textlow' and `texthigh', not the generic
psymtab fields.
* mdebugread.c (parse_lines, parse_partial_symbols,
psymtab_to_symtab_1): Same.
* partial-stab.h: Same.
* mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
"bltzall" as writing GPR 31 (since they do).
* mips-dis.c (print_insn_arg): Calculate info->target
where appropriate.
(print_insn_mips): Fill in instruction info.
(print_mips16_insn_arg): Remove unneded variable 'val'.
Removed duplicated instruction target calculations,
calculate once and print that result. Use same idiom for
masking the jump segment bits as is used in print_insn_arg.
* gas/mips/beq.s: Add zero words at end of instructions so
that objdump will print "..." when disassembling.
* gas/mips/beq.d: Update for disassembler changes which force
branch delay-slot nops to be printed.
* gas/mips/bge.d: Ditto.
* gas/mips/bgeu.d: Ditto.
* gas/mips/blt.d: Ditto.
* gas/mips/bltu.d: Ditto.
* gas/mips/jal-svr4pic.d: Ditto.
* gas/mips/jal-xgot.d: Ditto.
Alan Modra [Tue, 23 Oct 2001 03:55:24 +0000 (03:55 +0000)]
* elflink.h (elf_link_input_bfd): Zero the reloc instead of doing
bfd_reloc_type_lookup (bfd, BFD_RELOC_NONE) as bfd_reloc_type_lookup
doesn't accept BFD_RELOC_* on some targets, eg. hppa.
* elf32-hppa.c (elf32_hppa_link_hash_entry): Remove plt_abs.
(hppa_link_hash_newfunc): Likewise.
(elf32_hppa_finish_dynamic_symbol): Likewise.
(allocate_dynrelocs): Always allocate .got relocs if shared.
(elf32_hppa_relocate_section): Output them too. Similarly
consolidate .plt reloc code, and no longer initialise .plt
when a reloc is output.
(elf32_hppa_finish_dynamic_symbol): Only initialise .plt entries
when no reloc is output.
From Herbert Xu <[email protected]>
* elf32-hppa.c (final_link_relocate): Call bfd_set_error for
unreachable branches.
Andrew Cagney [Sat, 20 Oct 2001 19:32:40 +0000 (19:32 +0000)]
* alpha-nat.c: Include <alpha/coreregs.h> instead of
<machine/reg.h>.
(fetch_osf_core_registers): Define core_reg_mapping in a way that
works on OSF5 as well as previous OSF versions.
Alan Modra [Sat, 20 Oct 2001 13:49:00 +0000 (13:49 +0000)]
* ldgram.y (mri_script_command): Surround processing of INCLUDE
with ldlex_script, ldlex_popstate.
(ifile_p1): Likewise.
* ldlex.l (EOF): Don't BEGIN(SCRIPT). Restore lineno from the
correct slot.
(lex_push_file): Save current lineno to lineno_stack. Set lineno
to 1. Don't BEGIN(SCRIPT).
(lex_redirect): Similarly.
* ldmain.c (main): Set yydebug non-zero if YYDEBUG.
DJ Delorie [Fri, 19 Oct 2001 00:00:55 +0000 (00:00 +0000)]
* pe-dll.c (autofilter_objectlist): Add startup objects
for profiling.
(auto-export): Constify char * p.
Extract file basename and use strcmp rather than ststr
for object lookup.
Chris Demetriou [Thu, 18 Oct 2001 01:42:16 +0000 (01:42 +0000)]
[gas/testsuite/ChangeLog]
2001-10-17 Chris Demetriou <[email protected]>
* gas/mips/mips.exp (sb1-ext-ps): New test to test
SB-1 core's paired-single extensions to the MIPS64 ISA.
* gas/mips/sb1-ext-ps.d: New file.
* gas/mips/sb1-ext-ps.s: New file.
[include/opcode/ChangeLog]
2001-10-17 Chris Demetriou <[email protected]>
* mips.h (INSN_SB1): New cpu-specific instruction bit.
(OPCODE_IS_MEMBER): Allow instructions matching INSN_SB1
if cpu is CPU_SB1.
* mips-dis.c (mips_isa_type): Make the ISA used to disassemble
SB-1 binaries include instructions specific to the SB-1.
* mips-opc.c (SB1): New definition.
(mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
"recip.ps", "rsqrt.ps", and "sqrt.ps".
Alan Modra [Wed, 17 Oct 2001 06:03:41 +0000 (06:03 +0000)]
* config/tc-ppc.c (PPC_HA, PPC_HIGHERA, PPC_HIGHESTA): Simplify.
(ppc_size): Select PPC_OPCODE_64 if 64 bit.
(md_begin): Don't set ppc_size here.
(ppc_target_format): Test ppc_size as well as BFD_DEFAULT_TARGET_SIZE.
(md_shortopts): Constify.
(md_longopts): Likewise.
(md_longopts_size): Likewise.
(ppc_elf_suffix): Only allow 64-bit relocs when ppc_size specifies
64-bit opcodes.
(ppc_machine): Explain why this function is a nop.
Alan Modra [Wed, 17 Oct 2001 05:38:42 +0000 (05:38 +0000)]
* configure.in (MIPS_STABS_ELF): AC_DEFINE in only one place so
that autoheader doesn't duplicate config.in entries.
(DEFAULT_ARCH): Ditto.
* configure: Regenerate.
* config.in: Regenerate.
* win32-nat.c (safe_symbol_file_add_stub): Improve logic for avoiding load of
already loaded DLL.
(register_loaded_dll): Convert loaded DLL name to "posix" format or it will
confuse subsequent opening of the filename due to dos paths.
(dll_symbol_command): Pass from_tty parameter to safe_symbol_file_add.
Andrew Cagney [Tue, 16 Oct 2001 01:19:09 +0000 (01:19 +0000)]
202001-10-15 Jim Ingham <[email protected]>
* valarith.c (value_sub): Don't pass a raw type to
value_from_pointer, it has to go through check_typedef first.
projects / binutils.git / log