From: Pedro Alves Date: Tue, 22 Jan 2013 20:19:40 +0000 (+0000) Subject: All annotate_breakpoints_changed calls are along-side X-Git-Url: https://repo.jachan.dev/binutils.git/commitdiff_plain/9c97429fb1870f53e69556e967d01ce01116b35e All annotate_breakpoints_changed calls are along-side observer_notify_breakpoints_changed calls. All, except the init_raw_breakpoint one. But that one is actually wrong. The breakpoint is being constructed at that point, and hasn't been placed on the breakpoint chain yet. It would be better placed in install_breakpoint, and I actually started out that way. But once the annotate_breakpoints_changed are parallel to the observer calls, we can fully move annotations to observers too. One issue is that this changes the order of annotations a bit. Before, we'd emit the annotation, and after call "mention()" on the breakpoint (which prints the breakpoint number, etc.). But, we call the observers _after_ mention is called, so the annotation output will change a little: void install_breakpoint (int internal, struct breakpoint *b, int update_gll) { add_to_breakpoint_chain (b); set_breakpoint_number (internal, b); if (is_tracepoint (b)) set_tracepoint_count (breakpoint_count); if (!internal) mention (b); observer_notify_breakpoint_created (b); if (update_gll) update_global_location_list (1); } I believe this order doesn't really matter (the frontend needs to wait for the prompt anyway), so I just adjust the expected output in the tests. Emacs in annotations mode doesn't seem to complain. Couple that with the previous patch that suppressed duplicated annotations, and, the fact that some annotations calls were actually missing (were we do have observer calls), more changes to the tests are needed anyway. Tested on x86_64 Fedora 17. gdb/ 2013-01-22 Pedro Alves * annotate.c (annotate_breakpoints_changed): Rename to ... (annotate_breakpoints_invalid): ... this. Make static. (breakpoint_changed): Adjust. (_initialize_annotate): Always install the observers. Install a "breakpoint_created" observer. * annotate.h (annotate_breakpoints_changed): Delete declaration. * breakpoint.c (set_breakpoint_condition) (breakpoint_set_commands, do_map_commands_command) (init_raw_breakpoint, clear_command, set_ignore_count) (enable_breakpoint_disp): No longer call annotate_breakpoints_changed. gdb/testsuite/ 2013-01-22 Pedro Alves * gdb.base/annota1.exp (breakpoints_invalid): New variable. Adjust tests to breakpoints-invalid changes. * gdb.cp/annota2.exp (breakpoints_invalid, frames_invalid): New variables. Adjust tests to breakpoints-invalid changes. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 48f5ad0400..adc2217d56 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,17 @@ +2013-01-22 Pedro Alves + + * annotate.c (annotate_breakpoints_changed): Rename to ... + (annotate_breakpoints_invalid): ... this. Make static. + (breakpoint_changed): Adjust. + (_initialize_annotate): Always install the observers. Install a + "breakpoint_created" observer. + * annotate.h (annotate_breakpoints_changed): Delete declaration. + * breakpoint.c (set_breakpoint_condition) + (breakpoint_set_commands, do_map_commands_command) + (init_raw_breakpoint, clear_command, set_ignore_count) + (enable_breakpoint_disp): No longer call + annotate_breakpoints_changed. + 2013-01-22 Pedro Alves * annotate.c: Include "inferior.h". diff --git a/gdb/annotate.c b/gdb/annotate.c index 387467b1ad..d82daa2919 100644 --- a/gdb/annotate.c +++ b/gdb/annotate.c @@ -63,9 +63,9 @@ print_value_flags (struct type *t) else printf_filtered (("-")); } - -void -annotate_breakpoints_changed (void) + +static void +annotate_breakpoints_invalid (void) { if (annotation_level == 2 && (!breakpoints_invalid_emitted @@ -575,15 +575,13 @@ annotate_display_prompt (void) static void breakpoint_changed (struct breakpoint *b) { - annotate_breakpoints_changed (); + annotate_breakpoints_invalid (); } void _initialize_annotate (void) { - if (annotation_level == 2) - { - observer_attach_breakpoint_deleted (breakpoint_changed); - observer_attach_breakpoint_modified (breakpoint_changed); - } + observer_attach_breakpoint_created (breakpoint_changed); + observer_attach_breakpoint_deleted (breakpoint_changed); + observer_attach_breakpoint_modified (breakpoint_changed); } diff --git a/gdb/annotate.h b/gdb/annotate.h index 73a3098b22..72c4f19dda 100644 --- a/gdb/annotate.h +++ b/gdb/annotate.h @@ -19,8 +19,6 @@ #include "symtab.h" #include "gdbtypes.h" -extern void annotate_breakpoints_changed (void); - extern void annotate_breakpoint (int); extern void annotate_catchpoint (int); extern void annotate_watchpoint (int); diff --git a/gdb/breakpoint.c b/gdb/breakpoint.c index 35848b4a8b..216ac73c00 100644 --- a/gdb/breakpoint.c +++ b/gdb/breakpoint.c @@ -985,7 +985,6 @@ set_breakpoint_condition (struct breakpoint *b, char *exp, } mark_breakpoint_modified (b); - annotate_breakpoints_changed (); observer_notify_breakpoint_modified (b); } @@ -1217,7 +1216,6 @@ breakpoint_set_commands (struct breakpoint *b, decref_counted_command_line (&b->commands); b->commands = alloc_counted_command_line (commands); - annotate_breakpoints_changed (); observer_notify_breakpoint_modified (b); } @@ -1334,7 +1332,6 @@ do_map_commands_command (struct breakpoint *b, void *data) incref_counted_command_line (info->cmd); decref_counted_command_line (&b->commands); b->commands = info->cmd; - annotate_breakpoints_changed (); observer_notify_breakpoint_modified (b); } } @@ -7072,8 +7069,6 @@ init_raw_breakpoint (struct breakpoint *b, struct gdbarch *gdbarch, program space. */ if (bptype != bp_breakpoint && bptype != bp_hardware_breakpoint) b->pspace = sal.pspace; - - annotate_breakpoints_changed (); } /* set_raw_breakpoint is a low level routine for allocating and @@ -12053,7 +12048,6 @@ clear_command (char *arg, int from_tty) else printf_unfiltered (_("Deleted breakpoints ")); } - annotate_breakpoints_changed (); for (ix = 0; VEC_iterate(breakpoint_p, found, ix, b); ix++) { @@ -14441,7 +14435,6 @@ set_ignore_count (int bptnum, int count, int from_tty) "crossings of breakpoint %d."), count, bptnum); } - annotate_breakpoints_changed (); observer_notify_breakpoint_modified (b); return; } @@ -14706,8 +14699,7 @@ enable_breakpoint_disp (struct breakpoint *bpt, enum bpdisp disposition, bpt->disposition = disposition; bpt->enable_count = count; update_global_location_list (1); - annotate_breakpoints_changed (); - + observer_notify_breakpoint_modified (bpt); } diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 5d3ed122a5..dd925097bf 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,11 @@ +2013-01-22 Pedro Alves + + * gdb.base/annota1.exp (breakpoints_invalid): New variable. + Adjust tests to breakpoints-invalid changes. + * gdb.cp/annota2.exp (breakpoints_invalid, frames_invalid): New + variables. + Adjust tests to breakpoints-invalid changes. + 2013-01-22 Pedro Alves * gdb.base/annota1.exp (annotate ignore count change): Add diff --git a/gdb/testsuite/gdb.base/annota1.exp b/gdb/testsuite/gdb.base/annota1.exp index 776738a659..45638ba3f7 100644 --- a/gdb/testsuite/gdb.base/annota1.exp +++ b/gdb/testsuite/gdb.base/annota1.exp @@ -25,6 +25,7 @@ if [is_remote target] then { return 0 } +set breakpoints_invalid "\r\n\032\032breakpoints-invalid\r\n" # # test running programs @@ -190,7 +191,7 @@ gdb_test_multiple "print non_existent_value" "print non_existent_value" { # we can test annotate-signal-handler-caller # gdb_test_multiple "break handle_USR1" "break handle_USR1" { - -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n$gdb_prompt$" { + -re "\r\n\032\032post-prompt\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n\032\032breakpoints-invalid\r\n.*$gdb_prompt$" { pass "break handle_USR1" } } @@ -199,7 +200,7 @@ gdb_test_multiple "break handle_USR1" "break handle_USR1" { # break at printf. When we are stopped at printf, we can test # gdb_test_multiple "break printf" "break printf" { - -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" { + -re "\r\n\032\032post-prompt\r\nBreakpoint.*at $hex.*\032\032breakpoints-invalid\r\n.*$gdb_prompt$" { pass "break printf" } -re "\r\n\032\032post-prompt\r\nwarning: Breakpoint address adjusted from $hex to $hex.\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" { @@ -210,7 +211,7 @@ gdb_test_multiple "break printf" "break printf" { # # get to printf # -set pat_begin "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n" +set pat_begin "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n${breakpoints_invalid}" set pat_adjust "warning: Breakpoint 3 address previously adjusted from $hex to $hex.\r\n" set pat_end "\r\n\032\032breakpoint 3\r\n\r\nBreakpoint 3, \r\n\032\032frame-begin 0 $hex\r\n\r\n(\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n)*.*\032\032frame-function-name\r\n.*printf(@.*)?\r\n\032\032frame-args\r\n.*\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" @@ -279,19 +280,19 @@ if [target_info exists gdb,nosignals] { # delete all the breakpoints # gdb_test_multiple "delete 1" "delete bp 1" { - -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" { + -re "\r\n\032\032post-prompt\r\n${breakpoints_invalid}$gdb_prompt$" { pass "delete bp 1" } } gdb_test_multiple "delete 2" "delete bp 2" { - -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" { + -re "\r\n\032\032post-prompt\r\n${breakpoints_invalid}$gdb_prompt$" { pass "delete bp 2" } } gdb_test_multiple "delete 3" "delete bp 3" { - -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" { + -re "\r\n\032\032post-prompt\r\n${breakpoints_invalid}$gdb_prompt$" { pass "delete bp 3" } } @@ -301,10 +302,10 @@ gdb_test_multiple "delete 3" "delete bp 3" { # to test the annotate output for the display command. # gdb_test_multiple "break main" "break at main" { - -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file ${escapedsrcfile}, line $main_line.*$gdb_prompt$" { + -re "post-prompt.*Breakpoint 4 at $hex: file ${escapedsrcfile}, line $main_line.*\032\032breakpoints-invalid.*$gdb_prompt$" { pass "break at main" } - -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file .*${srcfile}, line $main_line.*$gdb_prompt$" { + -re "post-prompt.*Breakpoint 4 at $hex: file .*${srcfile}, line $main_line.*\032\032breakpoints-invalid.*$gdb_prompt$" { setup_xfail "*-*-*" 1270 fail "break at main" } @@ -424,7 +425,7 @@ if [target_info exists gdb,nosignals] { } else { setup_xfail hppa*-*-hpux11* gdb_test_multiple "signal SIGTRAP" "signal sent" { - -re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032signalled\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" { + -re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032signalled\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n${breakpoints_invalid}\r\n\032\032stopped\r\n$gdb_prompt$" { pass "signal sent" } } diff --git a/gdb/testsuite/gdb.cp/annota2.exp b/gdb/testsuite/gdb.cp/annota2.exp index 0e2e005e5f..a4f7b17c26 100644 --- a/gdb/testsuite/gdb.cp/annota2.exp +++ b/gdb/testsuite/gdb.cp/annota2.exp @@ -38,6 +38,9 @@ if [is_remote target] then { return 0 } +set breakpoints_invalid "\r\n\032\032breakpoints-invalid\r\n" +set frames_invalid "\r\n\032\032frames-invalid\r\n" + # # line number where we need to stop in main # @@ -99,7 +102,7 @@ gdb_test_multiple "print a" "print class" { # `a.x is 1' is asynchronous regarding to `frames-invalid'. # gdb_test_multiple "continue" "continue until exit" { - -re "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)*\r\na.x is 1\r\n\(\r\n\032\032frames-invalid\r\n\)*\r\n\032\032exited 0\r\n$inferior_exited_re normally.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" { + -re "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)*\r\na.x is 1\r\n\(\r\n\032\032frames-invalid\r\n\)*\r\n\032\032exited 0\r\n$inferior_exited_re normally.\r\n${breakpoints_invalid}\r\n\032\032stopped\r\n$gdb_prompt$" { pass "continue until exit" } } @@ -112,7 +115,7 @@ gdb_expect { -re ".*Delete all breakpoints. \\(y or n\\) \r\n\032\032query.*$" { send_gdb "y\n" gdb_expect { - -re "\r\n\032\032post-query\r\n$gdb_prompt$" { pass "delete bps" } + -re "\r\n\032\032post-query\r\n${breakpoints_invalid}$gdb_prompt$" { pass "delete bps" } -re ".*$gdb_prompt$" { fail "delete bps" } timeout { fail "delete bps (timeout)" } } @@ -125,7 +128,7 @@ gdb_expect { # break at first line of main. # gdb_test_multiple "break 22" "break at main" { - -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n$gdb_prompt$" { + -re "\r\n\032\032post-prompt\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n\032\032breakpoints-invalid.*\r\n$gdb_prompt$" { pass "breakpoint at main" } } @@ -149,7 +152,7 @@ gdb_test_multiple "run" "run until main breakpoint" { # set up a watch point on a.x # gdb_test_multiple "watch a.x" "set watch on a.x" { - -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\n.*atchpoint 3: a.x\r\n$gdb_prompt$" { + -re "\r\n\032\032post-prompt\r\n.*atchpoint 3: a.x.*\r\n\032\032breakpoints-invalid\r\n.*$gdb_prompt$" { pass "set watch on a.x" } } @@ -159,10 +162,10 @@ gdb_test_multiple "watch a.x" "set watch on a.x" { # annotate-watchpoint # gdb_test_multiple "next" "watch triggered on a.x" { - -re "\r\n\032\032post-prompt\r\n\r\n(\032\032breakpoints-invalid\r\n\r\n)*\032\032starting\r\n\r\n(\032\032frames-invalid\r\n\r\n)*\032\032watchpoint 3\r\n.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*$srcfile\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$decimal\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n.*$gdb_prompt$" { + -re "\r\n\032\032post-prompt\r\n\032\032starting\r\n${frames_invalid}${breakpoints_invalid}\r\n\032\032watchpoint 3\r\n.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*$srcfile\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$decimal\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n${breakpoints_invalid}.*$gdb_prompt$" { pass "watch triggered on a.x" } - -re "\r\n\032\032post-prompt\r\n\r\n(\032\032breakpoints-invalid\r\n\r\n)*\032\032starting\r\n\r\n(\032\032frames-invalid\r\n\r\n)*\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" { + -re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n${frames_invalid}\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n${breakpoints_invalid}$gdb_prompt$" { kfail "gdb/38" "watch triggered on a.x" } }