X-Git-Url: https://repo.jachan.dev/binutils.git/blobdiff_plain/b255ccdb40a5f088f7a55d945e1ebec06d5430c1..ea2785a34a9e28e8849f61e70c03bd7d749f604f:/Makefile.in diff --git a/Makefile.in b/Makefile.in index 52fa8e2acb..96d5f30755 100644 --- a/Makefile.in +++ b/Makefile.in @@ -14,7 +14,7 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ # srcdir = . @@ -42,6 +42,7 @@ man9dir = $(mandir)/man9 infodir = $(prefix)/info includedir = $(prefix)/include docdir = $(datadir)/doc +GDB_NLM_DEPS = SHELL = /bin/sh @@ -66,6 +67,11 @@ HOST_PREFIX_1 = loser- # We don't specify -g -O because many compilers don't support -g -O, # and/or -O is broken in and of itself. CFLAGS = -g +LIBCFLAGS = $(CFLAGS) +CFLAGS_FOR_TARGET = $(CFLAGS) +LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET) +PICFLAG = +PICFLAG_FOR_TARGET = # start-sanitize-chill CHILLFLAGS = $(CFLAGS) @@ -74,7 +80,10 @@ CHILL_LIB = -lchill CXX = gcc # Use -O2 to stress test the compiler. -CXXFLAGS = -g -O2 -fno-implicit-templates +CXXFLAGS = -g -O2 +LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates +CXXFLAGS_FOR_TARGET = $(CXXFLAGS) +LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates RANLIB = ranlib NM = nm @@ -124,6 +133,13 @@ CXX_FOR_BUILD = $(CXX) SUBDIRS = "this is set via configure, don't edit this" OTHERS = +# This is set by the configure script to the list of directories which +# should be built using the target tools. +TARGET_CONFIGDIRS = xiberty libgloss newlib libio librx libstdc++ libg++ + +# This is set by the configure script to the arguments passed to configure. +CONFIG_ARGUMENTS = + ALL = all.normal INSTALL_TARGET = install-dirs \ $(INSTALL_MODULES) \ @@ -144,19 +160,19 @@ CC_FOR_TARGET = ` \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(CC); \ else \ - t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \ + t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \ fi; \ fi` # start-sanitize-chill CHILL_FOR_TARGET = ` \ if [ -f $$r/gcc/Makefile ] ; then \ - echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/chillrt/; \ + echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(CC); \ else \ - t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \ + t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \ fi; \ fi` @@ -173,18 +189,29 @@ CXX_FOR_TARGET = ` \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(CXX); \ else \ - t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \ + t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \ fi; \ fi` AS_FOR_TARGET = ` \ - if [ -f $$r/gas/Makefile ] ; then \ + if [ -f $$r/gas/as.new ] ; then \ echo $$r/gas/as.new ; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(AS); \ else \ - t='$(program_transform_name)'; echo as | sed -e 's/brokensed/brokensed/' $$t ; \ + t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \ + fi; \ + fi` + +DLLTOOL_FOR_TARGET = ` \ + if [ -f $$r/binutils/dlltool ] ; then \ + echo $$r/binutils/dlltool ; \ + else \ + if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ + echo $(DLLTOOL); \ + else \ + t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \ fi; \ fi` @@ -195,7 +222,7 @@ AR_FOR_TARGET = ` \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(AR); \ else \ - t='$(program_transform_name)'; echo ar | sed -e 's/brokensed/brokensed/' $$t ; \ + t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \ fi; \ fi` @@ -206,22 +233,21 @@ RANLIB_FOR_TARGET = ` \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(RANLIB); \ else \ - t='$(program_transform_name)'; echo ranlib | sed -e 's/brokensed/brokensed/' $$t ; \ + t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \ fi; \ fi` NM_FOR_TARGET = ` \ - if [ -f $$r/binutils/Makefile ] ; then \ + if [ -f $$r/binutils/nm.new ] ; then \ echo $$r/binutils/nm.new ; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(NM); \ else \ - t='$(program_transform_name)'; echo nm | sed -e 's/brokensed/brokensed/' $$t ; \ + t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \ fi; \ fi` - #### host and target specific makefile fragments come in here. ### @@ -235,6 +261,7 @@ BASE_FLAGS_TO_PASS = \ "CC_FOR_BUILD=$(CC_FOR_BUILD)" \ "CC_FOR_TARGET=$(CC_FOR_TARGET)" \ "CFLAGS=$(CFLAGS)" \ + "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \ $(start-sanitize-chill)\ "CHILLFLAGS=$(CHILLFLAGS)" \ "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \ @@ -242,7 +269,9 @@ BASE_FLAGS_TO_PASS = \ $(end-sanitize-chill)\ "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \ "CXXFLAGS=$(CXXFLAGS)" \ + "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \ "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \ + "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \ "GCC_FOR_TARGET=$(CC_FOR_TARGET)" \ "INSTALL=$(INSTALL)" \ "INSTALL_DATA=$(INSTALL_DATA)" \ @@ -250,9 +279,15 @@ BASE_FLAGS_TO_PASS = \ "INSTALL_XFORM=$(INSTALL_XFORM)" \ "LDFLAGS=$(LDFLAGS)" \ "LEX=$(LEX)" \ + "LIBCFLAGS=$(LIBCFLAGS)" \ + "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \ + "LIBCXXFLAGS=$(LIBCXXFLAGS)" \ + "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \ "M4=$(M4)" \ "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \ "NM_FOR_TARGET=$(NM_FOR_TARGET)" \ + "PICFLAG=$(PICFLAG)" \ + "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \ "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \ "SHELL=$(SHELL)" \ "EXPECT=$(EXPECT)" \ @@ -291,8 +326,14 @@ EXTRA_TARGET_FLAGS = \ 'AR=$$(AR_FOR_TARGET)' \ 'AS=$$(AS_FOR_TARGET)' \ 'CC=$$(CC_FOR_TARGET)' \ + 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \ 'CXX=$$(CXX_FOR_TARGET)' \ + 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \ + 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \ + 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \ + 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \ 'NM=$$(NM_FOR_TARGET)' \ + 'PICFLAG=$$(PICFLAG_FOR_TARGET)' \ 'RANLIB=$$(RANLIB_FOR_TARGET)' TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS) @@ -333,7 +374,6 @@ ALL_MODULES = \ all-flex \ all-gas \ all-gawk \ - all-gdb \ all-gprof \ all-grep \ all-gzip \ @@ -346,7 +386,6 @@ ALL_MODULES = \ all-make \ all-mmalloc \ all-opcodes \ - all-pagas \ all-patch \ all-prms \ all-rcs \ @@ -390,7 +429,6 @@ CROSS_CHECK_MODULES = \ check-find \ check-gas \ check-gawk \ - check-gdb \ check-gprof \ check-grep \ check-gzip \ @@ -403,7 +441,6 @@ CROSS_CHECK_MODULES = \ check-make \ check-mmcheckoc \ check-opcodes \ - check-pagas \ check-patch \ check-prms \ check-rcs \ @@ -441,8 +478,6 @@ INSTALL_MODULES = \ install-flex \ install-gas \ install-gawk \ - install-gdb \ - install-glob \ install-gprof \ install-grep \ install-gzip \ @@ -455,7 +490,6 @@ INSTALL_MODULES = \ install-make \ install-mmalloc \ install-opcodes \ - install-pagas \ install-patch \ install-prms \ install-rcs \ @@ -479,6 +513,7 @@ INSTALL_MODULES = \ ALL_X11_MODULES = \ all-emacs \ all-emacs19 \ + all-gdb \ all-expect \ all-gash \ all-tclX \ @@ -488,6 +523,7 @@ ALL_X11_MODULES = \ # compiled using $(X11_FLAGS_TO_PASS). CHECK_X11_MODULES = \ check-emacs \ + check-gdb \ check-expect \ check-gash \ check-tclX \ @@ -498,6 +534,7 @@ CHECK_X11_MODULES = \ INSTALL_X11_MODULES = \ install-emacs \ install-emacs19 \ + install-gdb \ install-expect \ install-gash \ install-tclX \ @@ -506,22 +543,30 @@ INSTALL_X11_MODULES = \ # This is a list of the targets for all of the modules which are compiled # using $(TARGET_FLAGS_TO_PASS). ALL_TARGET_MODULES = \ - $(start-sanitize-chill) \ - all-chillrt \ - $(end-sanitize-chill) \ all-libio \ + all-libstdc++ \ all-librx \ all-libg++ \ all-newlib \ + all-libgloss \ all-xiberty +# This is a list of the configure targets for all of the modules which +# are compiled using the target tools. +CONFIGURE_TARGET_MODULES = \ + configure-libio \ + configure-libstdc++ \ + configure-librx \ + configure-libg++ \ + configure-newlib \ + configure-libgloss \ + configure-xiberty + # This is a list of the check targets for all of the modules which are # compiled using $(TARGET_FLAGS_TO_PASS). CHECK_TARGET_MODULES = \ - $(start-sanitize-chill) \ - check-chillrt \ - $(end-sanitize-chill) \ check-libio \ + check-libstdc++ \ check-libg++ \ check-newlib \ check-xiberty @@ -529,20 +574,16 @@ CHECK_TARGET_MODULES = \ # This is a list of the install targets for all of the modules which are # compiled using $(TARGET_FLAGS_TO_PASS). INSTALL_TARGET_MODULES = \ - $(start-sanitize-chill) \ - install-chillrt \ - $(end-sanitize-chill) \ install-libio \ + install-libstdc++ \ install-libg++ \ install-newlib \ + install-libgloss \ install-xiberty # This is a shell case of all modules which are compiled using # $(TARGET_FLAGS_TO_PASS), used in the do-X rule. -TARGET_LIBS = libio | librx | libg++ | newlib | xiberty -# start-sanitize-chill -TARGET_LIBS = chillrt | libio | librx | libg++ | newlib | xiberty -# end-sanitize-chill +TARGET_LIBS = libio | libstdc++ | librx | libg++ | newlib | xiberty # The first rule in the file had better be this one. Don't put any above it. all: all.normal @@ -571,14 +612,14 @@ DO_X = \ do-install-info \ do-installcheck \ do-mostlyclean \ - do-realclean \ + do-maintainer-clean \ do-TAGS .PHONY: $(DO_X) $(DO_X): @target=`echo $@ | sed -e 's/^do-//'`; \ r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ - for i in $(SUBDIRS); do \ + for i in $(SUBDIRS) $(TARGET_CONFIGDIRS); do \ if [ -f ./$$i/Makefile ]; then \ case $$i in \ $(TARGET_LIBS) ) \ @@ -610,7 +651,8 @@ $(DO_X): # Here are the targets which correspond to the do-X targets. .PHONY: info installcheck dvi install-info -.PHONY: clean distclean mostlyclean realclean local-clean local-distclean +.PHONY: clean distclean mostlyclean maintainer-clean realclean +.PHONY: local-clean local-distclean local-maintainer-clean info: do-info installcheck: do-installcheck dvi: do-dvi @@ -627,10 +669,16 @@ local-clean: local-distclean: -rm -f Makefile config.status +local-maintainer-clean: + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + clean: do-clean local-clean mostlyclean: do-mostlyclean local-clean distclean: do-distclean local-clean local-distclean -realclean: do-realclean local-clean local-distclean +maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean +maintainer-clean: local-distclean +realclean: maintainer-clean # Check target. @@ -642,12 +690,20 @@ check: $(CHECK_MODULES) \ # Installation targets. -.PHONY: install uninstall vault-install +.PHONY: install uninstall source-vault binary-vault vault-install install: $(INSTALL_TARGET) uninstall: @echo "the uninstall target is not supported in this tree" +source-vault: + $(MAKE) -f ./release/Build-A-Release \ + host=$(host_alias) source-vault + +binary-vault: + $(MAKE) -f ./release/Build-A-Release \ + host=$(host_alias) target=$(target_alias) + vault-install: @if [ -f ./release/vault-install ] ; then \ ./release/vault-install $(host_alias) $(target_alias) ; \ @@ -697,13 +753,12 @@ gcc-no-fixedincludes: # This rule is used to build the modules which use FLAGS_TO_PASS. To # build a target all-X means to cd to X and make all. -# all-glob is handled specially because it doesn't actually build. # # all-gui, and all-libproc are handled specially because # they are still experimental, and if they fail to build, that # shouldn't stop "make all". -.PHONY: $(ALL_MODULES) all-glob all-gui all-libproc -$(ALL_MODULES) all-glob all-gui all-libproc: +.PHONY: $(ALL_MODULES) all-gui all-libproc +$(ALL_MODULES) all-gui all-libproc: @dir=`echo $@ | sed -e 's/all-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ r=`pwd`; export r; \ @@ -753,6 +808,31 @@ $(INSTALL_MODULES): install-dirs true; \ fi +# This rule is used to configure the modules which are built with the +# target tools. +.PHONY: $(CONFIGURE_TARGET_MODULES) +$(CONFIGURE_TARGET_MODULES): + @dir=`echo $@ | sed -e 's/configure-//'`; \ + if [ -f ./$${dir}/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \ + if [ -d ./$${dir} ]; then true; else mkdir $${dir}; fi; \ + r=`pwd`; export r; \ + srcroot=`cd $(srcdir); pwd`; export srcroot; \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + cd $${dir}; \ + $${srcroot}/configure $(CONFIG_ARGUMENTS) --srcdir=$${srcroot}/$${dir}; \ + else \ + true; \ + fi + # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS. # To build a target all-X means to cd to X and make all. .PHONY: $(ALL_TARGET_MODULES) @@ -887,11 +967,8 @@ install-dosrel-fake: # This is a list of inter-dependencies among modules. all-autoconf: all-m4 all-bfd: -all-binutils: all-libiberty all-opcodes all-bfd all-flex +all-binutils: all-libiberty all-opcodes all-bfd all-flex all-byacc all-byacc: -# start-sanitize-chill -all-chillrt: all-binutils all-gas all-gcc all-newlib -# end-sanitize-chill all-cvs: all-dejagnu: all-tcl all-expect all-tk all-diff: all-libiberty @@ -905,25 +982,32 @@ all-flex: all-libiberty all-byacc all-gas: all-libiberty all-opcodes all-bfd all-gash: all-tcl all-gawk: -all-gcc: all-libiberty all-byacc all-binutils all-gas all-pagas -all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim all-gcc all-ld -all-glob: +all-gcc: all-libiberty all-byacc all-binutils all-gas all-ld +all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim $(gdbnlmrequirements) all-gprof: all-libiberty all-bfd all-grep: all-libiberty all-gui: all-gdb all-libproc all-librx all-gzip: all-libiberty all-hello: all-libiberty all-indent: -all-ispell: all-emacs # all-emacs19 ??? is this needed? +all-ispell: all-emacs19 all-ld: all-libiberty all-bfd all-byacc all-flex -all-libg++: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib \ - all-libio all-librx -all-libio: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib +configure-libg++: all-gcc +all-libg++: configure-libg++ all-gas all-ld all-gcc all-xiberty all-newlib all-libio all-librx all-libstdc++ +configure-libgloss: all-gcc +all-libgloss: configure-libgloss +configure-libio: all-gcc +all-libio: configure-libio all-gas all-ld all-gcc all-xiberty all-newlib all-libiberty: +configure-librx: all-gcc all-newlib +all-librx: configure-librx +configure-libstdc++: all-gcc +all-libstdc++: configure-libstdc++ all-gas all-ld all-gcc all-xiberty all-newlib all-libio all-m4: all-libiberty all-make: all-libiberty all-mmalloc: -all-newlib: all-binutils all-gas all-pagas all-gcc +configure-newlib: all-gcc +all-newlib: configure-newlib all-binutils all-gas all-gcc all-opcodes: all-bfd all-patch: all-prms: all-libiberty @@ -944,7 +1028,8 @@ all-tgas: all-libiberty all-bfd all-time: all-wdiff: all-uudecode: all-libiberty -all-xiberty: all-gcc all-ld all-newlib +configure-xiberty: all-gcc +all-xiberty: configure-xiberty all-gcc all-ld all-newlib ### other supporting targets @@ -1005,6 +1090,7 @@ Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag) # distribution (perhaps it would be better to include it anyway). DEVO_SUPPORT= README Makefile.in configure configure.in \ config.guess config.sub config move-if-change \ + mpw-README mpw-build.in mpw-config.in mpw-configure \ COPYING COPYING.LIB install.sh # Files in devo/etc used in any net release. @@ -1012,6 +1098,7 @@ DEVO_SUPPORT= README Makefile.in configure configure.in \ # distribution (perhaps it would be better to include it anyway). ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \ configure.texi standards.texi make-stds.texi +ETC_SUPPORT_PFX=configure.info standards.info cfg-paper.info # When you use `make setup-dirs' or `make taz' you should always redefine # this macro. @@ -1021,7 +1108,7 @@ DISTSTUFFDIRS= ld gprof gdb libg++ binutils gnats gas # Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF). DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in # Directories where "info" should be built. -DISTDOCDIRS= ld gprof binutils gas bfd libg++ libio gdb gnats send-pr +DISTDOCDIRS= ld gprof binutils gas bfd libg++ libio gdb gnats send-pr etc .PHONY: taz @@ -1063,8 +1150,7 @@ taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \ if [ -d $$d ]; then \ case " $$p " in \ *" $$d "*) \ - echo making diststuff in $$d ; \ - (cd $$d ; pwd ; $(MAKE) diststuff ) || exit 1 ;; \ + (cd $$d ; $(MAKE) diststuff ) || exit 1 ;; \ esac ; \ if [ -d $$d/proto-$$d.dir ]; then \ ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \ @@ -1076,14 +1162,17 @@ taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \ $(MAKE) distclean # mkdir proto-toplev/etc - (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \ + (cd proto-toplev/etc; \ + for i in $(ETC_SUPPORT); do \ ln -s ../../etc/$$i . ; \ - done) + done ; \ + for i in $(ETC_SUPPORT_PFX); do \ + ln -s ../../etc/$$i* . ; \ + done) # - # Take out texinfo and glob from configurable dirs + # Take out texinfo from configurable dirs rm proto-toplev/configure.in sed -e '/^host_tools=/s/texinfo //' \ - -e '/^host_libs=/s/glob //' \ proto-toplev/configure.in # mkdir proto-toplev/texinfo @@ -1109,19 +1198,19 @@ gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas # The FSF "binutils" release includes gprof and ld. .PHONY: binutils.tar.gz -BINUTILS_SUPPORT_DIRS= bfd include libiberty opcodes ld gprof +BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils $(MAKE) -f Makefile.in taz TOOL=binutils \ - SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)" + SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat" .PHONY: gas+binutils.tar.gz GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas $(MAKE) -f Makefile.in taz TOOL=gas \ - SUPPORT_FILES="$(GASB_SUPPORT_DIRS)" + SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat" .PHONY: libg++.tar.gz -LIBGXX_SUPPORT_DIRS=include libio librx libiberty xiberty +LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty xiberty libg++.tar.gz: $(DIST_SUPPORT) libg++ $(MAKE) -f Makefile.in taz TOOL=libg++ \ SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)" @@ -1132,14 +1221,29 @@ gnats.tar.gz: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)" .PHONY: gdb.tar.gz -GDB_SUPPORT_DIRS= bfd glob include libiberty mmalloc opcodes readline sim +GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils +GDBTK_SUPPORT_DIRS= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi` gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb $(MAKE) -f Makefile.in taz TOOL=gdb \ - SUPPORT_FILES="$(GDB_SUPPORT_DIRS)" + SUPPORT_FILES="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)" .PHONY: newlib.tar.gz -NEWLIB_SUPPORT_DIRS= +NEWLIB_SUPPORT_DIRS=libgloss +# taz configures for the sun4 target which won't configure newlib. +# We need newlib configured so that the .info files are made. +# Unfortunately, it is not enough to just configure newlib separately: +# taz will build the .info files but since SUBDIRS won't contain newlib, +# distclean won't be run (leaving Makefile, config.status, and the tmp files +# used in building the .info files, eg: *.def, *.ref). +# Compensate here by configuring newlib for a simple (no multilib support) +# cross target (sparc64), building the info files, and doing make distclean +# ourselves. newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib + rootme=`pwd` ; \ + cd newlib && ../configure --srcdir $$rootme/newlib \ + --host sun4 --target sparc64-elf + cd newlib ; make info + cd newlib ; make distclean $(MAKE) -f Makefile.in taz TOOL=newlib \ SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \ DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" \