# This file is going to be ugly. It will be VERY specific to the
# Cygnus environment and build-process.
#
+# Useful targets (rt = recursion target):
+# (please correct or expand on this)
+# FIXME: Might some of these be superfluous?
#
-
+# all-emacs
+# all-cygnus - set up install directories, build 3stage native and all
+# supported cross targets, then check 3stage'd native
+# (rt = $(canonhost)-stamp-3stage-done, do-cygnus for cross)
+# native - set up install directories, build 3stage native
+# (rt = $(canonhost)-stamp-3stage-1)
+# build-cygnus - build 3stage native and all supported cross targets
+# (rt = $(canonhost)-stamp-3stage-done, build-cygnus for cross)
+# build-latest - build native and all supported cross targets
+# (rt = build-latest)
+# all-native - set up install directories, build native
+# (rt = do-native)
+# all-cross - set up install directories, build all targets
+# (rt = do-cygnus)
+# config - configure native and all supported cross targets
+# (rt = do1-config, do-native-config for cross)
+# build - build native and all supported cross targets
+# (rt = do1-build, build-native for cross)
+# 3build - build 3stage native and all supported cross targets
+# (rt = all, build-cygnus for cross)
+# build-all-latest - build 3stage native and all supported cross targets
+# (rt = $(canonhost)-stamp-3stage-done, build-latest for cross)
+# clean - remove objdir directories, stamp files
+# (rt = clean)
+#
+# To configure/build for fewer targets, specify TARGETS="native cross1 ...".
+
TREE = devo
include $(TREE)/release-info
-TEST_INSTALL_DISK = /big
+TEST_INSTALL_DISK = /galt
INSTALLDIR = $(TEST_INSTALL_DISK)/$(TREE)-test/$(RELEASE_TAG)
MAKEINFOFLAGS =
log = 1>$(canonhost)-build-log 2>&1
+clog = 1>$(canonhost)-check-log 2>&1
cyglog = 1> $(canonhost)-x-$$i-cygnus-build-log 2>&1
+latestlog = 1> $(canonhost)-x-$$i-latest-build-log 2>&1
natlog = 1> $(canonhost)-x-$$i-native-build-log 2>&1
canonhost := $(shell $(TREE)/config.sub $(host))
ifeq ($(canonhost),sparc-sun-solaris2.1)
canonhost := sparc-sun-solaris2
endif
+ifeq ($(canonhost),sparc-sun-solaris2.3)
+canonhost := sparc-sun-solaris2
+endif
ifeq ($(canonhost),mips-dec-ultrix4.2)
canonhost := mips-dec-ultrix
endif
ifeq ($(canonhost),mips-sgi-irix4.0.1)
canonhost := mips-sgi-irix4
endif
+ifeq ($(canonhost),mips-sgi-irix4.0.5H)
+canonhost := mips-sgi-irix4
+endif
ifeq ($(canonhost),rs6000-ibm-aix3.2)
canonhost := rs6000-ibm-aix
endif
ifeq ($(canonhost),i386-unknown-sco3.2v4.0)
canonhost := i386-sco3.2v4
endif
+ifeq ($(canonhost),i386-unknown-sco3.2v4)
+canonhost := i386-sco3.2v4
+endif
ifeq ($(canonhost),i386-unknown-go32)
canonhost := i386-go32
endif
+ifeq ($(canonhost),i386-unknown-sysv4.2)
+canonhost := i386-sysv4.2
+endif
ifeq ($(canonhost),i386-lynx-lynxos)
-canonhost := i386-lynxos
+canonhost := i386-lynx
endif
ifeq ($(canonhost),m68k-lynx-lynxos)
-canonhost := m68k-lynxos
+canonhost := m68k-lynx
+endif
+ifeq ($(canonhost),rs6000-lynx-lynxos2.2.2)
+canonhost := rs6000-lynx
endif
ifeq ($(canonhost),sparc-sun-sunos4.1.3)
TARGETS = $(NATIVE) \
+ i386-go32 \
a29k-amd-udi \
- h8300-hms h8500-hms \
- i386-aout i386-go32 i386-coff \
- i960-vxworks i960-intel-nindy \
- mips-idt-ecoff \
+ h8300-hms \
+ i386-aout \
+ i386-lynx \
+ i960-vxworks \
+ mips-idt-ecoff mips64-elf mips-elf \
m68k-aout m68k-vxworks m68k-coff \
- m88k-coff \
- sh-hms \
- sparc-aout sparc-vxworks sparclitefrwcompat-aout sparclite-aout \
- z8k-sim
+ m68k-lynx \
+ sh-hms \
+ sparc-aout sparc-lynx sparc-vxworks \
+ sparclite-aout sparclite-vxworks \
+ sparclite-coff z8k-coff
GCC = gcc -O -pipe
all: all-cygnus
endif
ifeq ($(canonhost),m68k-sun-sunos4.1.1)
TARGETS = $(NATIVE) \
- i960-intel-nindy \
- m68k-aout m68k-vxworks m68k-coff i960
+ m68k-coff
GCC = gcc -O -msoft-float
CC = cc -J
all: all-cygnus
ifeq ($(canonhost),sparc-sun-solaris2)
TARGETS = $(NATIVE) \
a29k-amd-udi \
- m68k-vxworks m68k-coff m68k-aout \
- mips-idt-ecoff \
- i386-aout \
- i960-vxworks i960-intel-nindy \
- sparc-aout sparc-vxworks sparclite-aout
+ i960-vxworks \
+ m68k-aout m68k-coff m68k-vxworks \
+ m88k-coff \
+ mipsel-idt-ecoff sparc-lynx
CC = cc -Xs
GCC = gcc -O -pipe
all: all-cygnus
endif
ifeq ($(canonhost),mips-sgi-irix4)
-TARGETS = $(NATIVE) sh-hms
-CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh1500
+TARGETS = $(NATIVE) \
+ mips-idt-ecoff sh-hms \
+ mips64-elf
+CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000
all: all-cygnus
endif
ifeq ($(canonhost),rs6000-ibm-aix)
TARGETS = $(NATIVE) \
- i960-vxworks i960-intel-nindy \
- m68k-aout m68k-vxworks
+ i960-vxworks \
+ m68k-aout
all: all-cygnus
endif
ifeq ($(canonhost),m68k-hp-hpux)
-TARGETS = $(NATIVE)
+TARGETS = $(NATIVE) m68k-aout
TMPDIR := $(shell mkdir $(canonhost)-tmpdir; cd $(canonhost)-tmpdir ; pwd)
CC = cc -Wp,-P
#CFLAGS = +O1000
-CFLAGS = -g
+CFLAGS =
all: all-cygnus
endif
ifeq ($(canonhost),hppa1.1-hp-hpux)
TARGETS = \
+ $(NATIVE) \
i960-vxworks \
m68k-aout m68k-vxworks
-# a29k-amd-udi \
-# h8300-hms h8500-hms \
-# i386-aout i386-go32 \
-# i960-vxworks i960-intel-nindy \
-# mips-idt-ecoff \
-# m68k-aout m68k-vxworks m68k-coff \
-# m88k-coff \
-# sparc-aout sparclite-aout \
-# z8k-sim
-CC = cc
+CC = cc -Wp,-H256000
#CFLAGS = +Obb2000
CFLAGS = -g
-all: all-native
+all: all-cygnus
endif
ifeq ($(canonhost),i386-sco3.2v4)
ifeq ($(canonhost),i386-go32)
TARGETS = \
a29k-amd-udi \
- h8300-hms \
- i386-aout \
+ h8300-hms \
+ i386-aout \
m68k-aout m68k-coff \
- mips-idt-ecoff \
+ mips-idt-ecoff \
+ sh-hms \
sparclite-aout
CC = i386-go32-gcc
GCC = i386-go32-gcc -O
CFLAGS =
CXXFLAGS = -O
MAKEINFOFLAGS = --no-split
-all: all-cross
+all: all-dos
endif
-ifeq ($(canonhost),i386-univel-sysv4.2)
-TARGETS = $(NATIVE)
+ifeq ($(canonhost),i386-sysv4.2)
+TARGETS = $(NATIVE) i386-netware
CC = cc
all: all-cygnus
endif
-ifeq ($(canonhost),i386-lynxos)
+ifeq ($(canonhost),i386-lynx)
+TARGETS = $(NATIVE)
+CC = /bin/gcc
+all: all-cygnus
+SHELL=/bin/bash
+endif
+
+ifeq ($(canonhost),m68k-lynx)
TARGETS = $(NATIVE)
CC = /bin/gcc
all: all-cygnus
+SHELL=/bin/bash
endif
-ifeq ($(canonhost),m68k-lynxos)
+ifeq ($(canonhost),sparc-lynx)
TARGETS = $(NATIVE)
CC = /bin/gcc
all: all-cygnus
+SHELL=/bin/bash
endif
+ifeq ($(canonhost),rs6000-lynx)
+TARGETS = $(NATIVE)
+CC = /usr/cygnus/progressive/bin/gcc
+all: all-cygnus
+SHELL=/bin/bash
+endif
FLAGS_TO_PASS := \
"GCC=$(GCC)" \
"CXXFLAGS=$(CXXFLAGS)" \
"host=$(canonhost)" \
"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
- "RELEASE_TAG=$(RELEASE_TAG)"
+ "RELEASE_TAG=$(RELEASE_TAG)" \
+ "SHELL=$(SHELL)"
+
+# set GNU_MAKE and CONFIG_SHELL correctly in sub-builds
+ifeq ($(patsubst %-lynxos,lynxos,$(canonhost)),lynxos)
+FLAGS_TO_PASS := $(FLAGS_TO_PASS) "GNU_MAKE=$(MAKE)" "CONFIG_SHELL=/bin/bash"
+endif
all-emacs:
@echo build started at `date`
[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
-rm -f $(ROOTING)/$(RELEASE_TAG)
ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1 > $(canonhost)-native-log 2>&1
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do-latest > $(canonhost)-latest-log 2>&1
+ $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1 > $(canonhost)-emacs-native-log 2>&1
+ $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do-latest > $(canonhost)-emacs-latest-log 2>&1
@echo done at `date`
all-cygnus:
@echo build started at `date`
[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
- rm -f $(ROOTING)/$(RELEASE_TAG)
- ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
+ -rm -f $(ROOTING)/$(RELEASE_TAG) && ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
@for i in $(TARGETS) ; do \
if [ "$$i" = "native" ] ; then \
if [ ! -f $(canonhost)-stamp-3stage-done ] ; then \
echo " completed successfully" ; \
else \
true ; \
- fi \
+ fi ; \
else \
echo "building $(canonhost) cross to $$i" ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-cygnus $(cyglog) && \
echo " completed successfully" ; \
fi ; \
done
+ @if [ ! -f $(canonhost)-stamp-3stage-checked ] ; then \
+ echo checking $(canonhost) native ; \
+ $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-check-3stage $(clog) ; \
+ touch $(canonhost)-stamp-3stage-checked ; \
+ else \
+ true ; \
+ fi
@echo done at `date`
native:
echo "3staging $(canonhost) native" ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
echo " completed successfully" ; \
- fi \
+ fi ; \
else \
echo "building $(canonhost) cross to $$i:" `date` ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
done
@echo done at `date`
+build-latest:
+ @echo build started at `date`
+ @for i in $(TARGETS) ; do \
+ if [ "$$i" != "native" ] ; then \
+ echo "building $(canonhost) cross to $$i:" `date` ; \
+ $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(latestlog) && \
+ echo " completed successfully" ; \
+ fi ; \
+ done
+ @echo done at `date`
+
all-native:
[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
rm -f $(ROOTING)/$(RELEASE_TAG)
echo " completed successfully" ; \
done
+do-dos:
+ $(MAKE) -f build-all.mk build=$(host) host=i386-go32 all-dos
+all-dos:
+ @for i in $(TARGETS) ; do \
+ echo "building $(canonhost) cross to $$i" ; \
+ $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) host=$(host) target=$$i do-dos $(cyglog) && \
+ echo " completed successfully at `date`" ; \
+ done
+
config:
@for i in $(TARGETS) ; do \
if [ "$$i" = "native" ] ; then \
echo " completed successfully" ; \
else \
echo "building $(canonhost) cross to $$i" ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-native $(cyglog) && \
+ $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-native $(natlog) && \
echo " completed successfully" ; \
fi ; \
done
fi ; \
done
+build-all-latest:
+ @for i in $(TARGETS) ; do \
+ if [ "$$i" = "native" ] ; then \
+ echo "building 3stage for $(canonhost)" ; \
+ $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
+ echo " completed successfully" ; \
+ else \
+ echo "building $(canonhost) cross to $$i" ; \
+ $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(cyglog) && \
+ echo " completed successfully" ; \
+ fi ; \
+ done
+
+clean:
+ $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) clean $(log)
+
### Local Variables:
### fill-column: 131
### End:
projects / binutils.git / blobdiff