+Fri Sep 24 17:25:41 1993 Stu Grossman (grossman at cygnus.com)
+
+ * corelow.c: Add multi thread/process support for core files with
+ .reg/XXX pseudo-sections.
+ * i386lynx-nat.c thread.h thread.c: Remove unnecessary core file
+ support.
+
+
+ * remote-udi.c (download): Skip zero length sections.
+
+ * valops.c (search_struct_method, value_struct_elt):
+ Use (value)-1, not -1, for error.
+
+ * infcmd.c (step_1), infrun.c (wait_for_inferior): Add comments
+ about SHIFT_INST_REGS.
+
+ * exec.c (exec_file_command): Set text_end based on all code readonly
+ sections, not just ".text".
+
+ * defs.h, infcmd.c, config/z8k/tm-z8k.h, config/m88k/tm-m88k.h,
+ config/sh/tm-sh.h, config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
+ z8k-tdep.c: Remove all references to ADDR_BITS_SET.
+ * config/m88k/tm-m88k.h: Define TARGET_WRITE_PC.
+
+ * config/m88k/tm-m88k.h, m88k-tdep.c: Add call function stuff.
+
+
+ * config/mips/tm-mips.h (STORE_STRUCT_RETURN): Define as noop as
+ the pushing of the struct return address is already handled in
+ mips_push_arguments.
+ * mips-tdep.c (reinit_frame_cache_sfunc): Fix typo in prototype
+ declaration.
+ * mipsread.c (parse_symbol, parse_type, upgrade_type): Add more
+ sanity checks for corrupt symbol entries to avoid core dumps
+ the same problems as the OSF/1 alpha cc.
+ * mipsread.c (parse_lines): Iterate over the range of the compressed
+ line number entries, the old iteration sometimes failed to stop
+ and wrote past the end of the LINETABLE. Add sanity check to avoid
+ the same problem in case the line number info is corrupt.
+ * mipsread.c (parse_procedure): Adjust pdr for alpha __sigtramp.
+ * mipsread.c (parse_external, parse_partial_symbols): Ignore stNil
+ symbols that are produced for statics in .o files and stLocal symbols
+ that are produced for every section in OSF/1 dynamically linked
+ executables.
+ * mipsread.c (psymtab_to_symtab_1): Put out `undefined symbols'
+ warning only under `verbose on' as there are many undefined symbols
+ in a dynamically linked executable.
+
+
+ * config/i960/nindy960.mt: Don't define REMOTE_O; REMOTE_O was
+ intended only for VxWorks. Remove dcache.o from TDEPFILES now
+ that we pick it up from the default REMOTE_O.
+
+ * breakpoint.c (bpstat_what): Initialize retval.call_dummy and
+ retval.step_resume.
+
+ * mips-tdep.c (mips_frame_chain): If frame size zero, return zero.
+ * rs6000-tdep.c: Add comment about framelessness.
+
+ * remote-nindy.c: Declare ninMemGet and ninMemPut.
+
+Wed Sep 22 08:02:57 1993 Stu Grossman (grossman at cygnus.com)
+
+ * Makefile.in: Add i386lynx-tdep to the right places.
+ (TARDIRS): Add gdbserver.
+
+ * exec.c (print_section_info): Print entry point.
+ * i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into
+ i386lynx-tdep.c. Add core file support.
+ * i386lynx-tdep.c: New module for Lynx/386 target dependant code.
+ * maint.c: Add `maint info sections' command to print info about all
+ sections that BFD knows about for exec and core files.
+ * sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer
+ before putting frame on the stack. Consolidate writes to reduce
+ traffic for remote debugging.
+ * config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o.
+ * config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o.
+ * config/i386/nm-i386lynx.h: Add target_pid_to_str().
+ * config/i386/tm-i386lynx.h: Remove target_pid_to_str().
+ * sparclite/Makefile.in: Add deps to keep Sun make happy.
+
+
+ * breakpoint.h, breakpoint.c (bpstat_stop_status): Add new argument
+ not_a_breakpoint.
+ * infrun.c (wait_for_inferior): Pass it. Also consolidate the
+ test of whether we are stepping into a CURRENTLY_STEPPING macro.
+
+
+ * breakpoint.c (bpstat_stop_status),
+ infcmd.c (step_1),
+ infrun.c (wait_for_inferior): collapse SHIFT_INST_REGS ifdef
+ and insert macro.
+
+ * m88k-tdep.c: include ieee-float.h. new global target_is_m88110.
+ new const struct ext_format_m88110 for float format.
+ (pic_prologue_code): add braces.
+ (next_insn): remove unused variable buf.
+ (frame_find_saved_regs): remove unused variables next_addr,
+ saved_regs, regnum.
+ (frame_locals_address): remove unused variables frame, ap.
+ (frame_args_address): remove unused variables frame, ap.
+ (push_parameters): add some breaks and a default case.
+
+ * remote-bug.c: remove redundant includes of value.h, target.h,
+ serial.h.
+ (bug_open): corrected typo, sr_multi_scan -> gr_multi_scan.
+ (bug_fetch_register): special case sfip register for m88110.
+ remove flag bit masking of pc registers. This should be handled
+ by the ADDR_BITS_* macros.
+ (bug_store_register): special case sfip register for m88110.
+ Corrected sprint format for extended registers.
+
+ * config/m88k/tm-m88k.h: white space and comment changes. include
+ ieee-float.h. expanded to cope with m88110 extended registers.
+ (R0_REGNUM, XFP_REGNUM, X0_REGNUM): new macros.
+ (SHIFT_INST_REGS): becomes a real macro.
+
+
+ * breakpoint.c (breakpoint_1): Support bp_call_dummy.
+
+
+ * elfread.c (record_minimal_symbol_and_info): Guess the section to
+ use from the type.
+ * objfiles.c: Include gdb-stabs.h for SECT_* macros.
+ (objfile_relocate): Relocate textlow and texthigh in psymtabs.
+ Relocate partial symbols. Check that minimal SYMBOL_SECTION is
+ nonnegative before using it.
+ * symtab.h: Adjust section field comment.
+
+ * remote.c (interrupt_query): New function.
+ (remote_interrupt_twice): Call interrupt_query.
+ (putpkt, getpkt): If quit_flag is set, call interrupt_query.
+ (remote_wait): Don't bother with objfile_relocate if the addresses
+ haven't changed.
+ (remote_fetch_registers): If we see a packet that doesn't start
+ with a hex character, fetch a new one.
+
+
+ * remote.c, remote-utils.c: Use SERIAL_FLUSH_INPUT after opening it.
+
+ * printcmd.c (print_scalar_formatted): When truncating value we are
+ going to print as unsigned, handle it generally for any length
+ less than sizeof (LONGEST), rather than special-casing sizeof (char),
+ sizeof (short), and sizeof (long). Clarify comment on what this
+ is for.
+
+ * symfile.c (deduce_language_from_filename): Accept .cxx for C++.
+ * buildsym.c (start_subfile): Use deduce_language_from_filename
+ rather than checking for .C or .cc ourself.
+
+
+ * defs.h: Declare argument of re_comp as const char *.
+
+ * remote.c, remote-mips.c: Use sr_get_debug not remote_debug.
+
+ * README: Say using bfd from another release doesn't generally work.
+
+
+ * mipsread.c (parse_type): Don't complain() if we guessed struct
+ and it was a union, or vice versa.
+
+ * defs.h (make_cleanup): Change PTR to void * when inside PARAMS.
+
+ Some of the following is in #ifdef CALL_DUMMY_BREAKPOINT_OFFSET.
+ * breakpoint.h (enum bptype): Add bp_call_dummy.
+ (struct bpstat_what): Add call_dummy field.
+ * infrun.c (wait_for_inferior): Deal with it.
+ * breakpoint.c (bpstat_what): Deal with call dummy breakpoint.
+ * infcmd.c (run_stack_dummy): Set the call dummy breakpoint.
+ * config/sparc/tm-sparc.h: Define CALL_DUMMY_BREAKPOINT_OFFSET.
+
+ * remote-sim.h: New file.
+ * remote-sim.c: Add remote debug feature. Rename stuff to distinguish
+ interface to simulator from gdb-specific stuff. Other changes.
+start-sanitize-v9
+ * remote-sp64sim.c: Renamed to remote-sim.c.
+ Use sr_get_debug instead of our own sim_verbose/simif_snoop.
+ Use gnutarget in call to bfd_openr.
+ Rename simif_* to gdbsim_*.
+ * config/sparc/sp64sim.mt: Change remote-sp64sim.c to remote-sim.c.
+end-sanitize-v9
+
+
+ * findvar.c (extract_signed_integer): Cast *p to LONGEST before doing
+ the xor and subtract. Otherwise it will not sign extend if the type
+ of LONGEST is larger than int.
+ * cp-valprint.c (cp_print_class_method): Inhibit core dump if
+ domain is an undefined cross reference.
+ * valops.c (call_function_by_hand): Set real_pc to correct
+ value if CALL_DUMMY_LOCATION != ON_STACK.
+
+
+ * config/a29k/tm-a29k.h (FRAME_CHAIN): If rsize is zero, return zero.
+
+Thu Sep 16 13:16:22 1993 Stu Grossman (grossman at cygnus.com)
+
+ * infrun.c (wait_for_inferior): Allow user to single step within
+ a stack dummy.
+
+
+ * dbxread.c (copy_pending): Deal with END NULL.
+ (process_one_symbol): Add comments about what common_block NULL means.
+
+
+ * remote-udi.c, remote-adapt.c, remote-mm.c: Move processor_type
+ to tm-a29k.h and a29k-tdep.c and make it an enum.
+ * a29k-tdep.c (a29k_get_processor_type): New function. Fix many
+ aspects of how we detected the processor type.
+ * remote-udi.c, remote-adapt.c, remote-mm.c (*_open): Call it
+ rather than figuring out the type ourselves.
+
+Thu Sep 16 12:12:59 1993 Stu Grossman (grossman at cygnus.com)
+
+ * sparc-stub.c (_trap_low): Do restore/save sequence after
+ setting sp to ensure that we load the previous window from the
+ right place on the stack.
+
+
+ * mipsread.c: Many changes for alpha ecoff format:
+ Correct sizeof(int) == sizeof(long) assumptions.
+ Replace stParsed hack by putting the parsed types on the pending chain.
+ Replace mips specific ecoff mapping by ECOFF_REG_TO_REGNUM macro,
+ provide default for cross debugging.
+ Swapping the symbol back is no longer needed as the symbol is not
+ modified anymore.
+ Add new alpha basic types, handle btTypedef, handle stStaticProc
+ external symbols .
+ Update and clean up cross_ref for alpha cc cross ref variations.
+ Allocate types on the type_obstack to inhibit storage leaks.
+ * config/mips/tm-mips.h (ECOFF_REG_TO_REGNUM): Define.
+ * gdbtypes.c (recursive_dump_type): Dump TYPE_TAG_NAME if it is set.
+
+
+ * stabsread.c (read_type): Process "s" (size) type attribute.
+ If type is defined to another type, copy the type.
+
+
+ * config/i386/i386v4.mh (NATDEPFILES): Move exec.o from here...
+ * config/i386/i386v4.mt (TDEPFILES): ...to here.
+
+
+ * Makefile.in (remote_utils_h): add serial.h and target.h.
+ (main.o, remote-es.o, remote-nindy.o, remote.o): remove target.h
+ (already in remote_utils_h).
+ (remote-utils.o): new rule.
+
+ * remote-utils.h: include serial.h.
+
+ * serial.h: ifdef protect from multiple inclusion.
+
+ * remote.c, remote-nindy.c, remote-mon.c, remote-es.c: include
+ remote-utils.h.
+
+ * remote.c (remote_open), remote-nindy.c (nindy_open,
+ nindy_files_info), remote-mon.c (general_open), remote-es.c
+ (es1800_open): use remote-utils facilities for baud rate.
+
+
+ * paread.c, coffread.c, elfread.c, dwarfread.c:
+ Include <time.h> and <sys/types.h> before libbfd.h.
+
+ * paread.c: Define BYTES_IN_WORD before including aout/aout64.h.
+
+ * Makefile.in (a29k-tdep.o): Depend on $(defs_h).
+ * config/a29k/tm-a29k.h (SAVED_PC_AFTER_CALL): Use gr122 not lr0
+ if this is a transparent procedure.
+
+
+ * remote.c: Define remote_debug to 0 and #if 0 baud_rate. Temporary
+ hack so this file compiles again.
+
+ * remote-utils.c (gr_multi_scan): Cast return value from alloca.
+ (gr_multi_scan): #if 0 never-reached return(-1).
+
+ * remote-udi.c (udi_wait): Return inferior_pid not 0.
+
+
+ Collect some remote things into remote-utils.
+ * remote-utils.[ch]: new files of functions collected from several
+ different remote targets.
+ * Makefile.in (REMOTE_O): add remote-utils.o.
+ (dcache_h, remote_utils_h): new macros.
+ (HFILES): add $(remote_utils_h).
+ (ALLDEPFILES): add $(remote_utils_h).
+ (dcache.o): new rule.
+ (main.o, remote-bug.o): also depend on $(remote_utils_h).
+ * target.h (remote_debug): extern moved to remote-utils.h.
+ * target.c (find_default_run_target, find_core_target): initialize
+ runable.
+ (remote_debug): moved to remote-utils.c.
+ (_initialize_targets): move declaration of user variable
+ remotedebug to remote-utils.c.
+ * remote-bug.c: include remote-utils.h rather than dcache.h.
+ (bug_close, bug_write, bug_write_cr, desc, bug_dcache, timeout,
+ dev_name, check_open, is_open, readchar, readchar_nofail,
+ pollchar, expect, expect_prompt, get_hex_digit, get_hex_byte,
+ get_hex_word, bug_kill, bug_detach, bug_create_inferior,
+ multi-scan, bug_prepare_to_store, bug_fetch_word,
+ bug_store_word, bug_files_info, bug_mourn, bug_com, bug_device,
+ bug_speed): removed and replaced with facilities from
+ remote-utils.[ch].
+ (bug_read_inferior_memory): renamed to bug_read_memory.
+ (bug_write_inferior_memory): renamed to bug_write_memory.
+ (bug_xfer_inferior_memory): renamed to bug_xfer_memory.
+ (get_word): comment out this unused function for now.
+ (bug_settings, cpu_check_strings): new statics.
+ (bug_open): rewritten to use gr_open.
+ (_initialize_remote_bug): remove declarations of commands bug,
+ device, speed.
+ * main.c: include remote-utils.h.
+ (baud_rate): removed to remote-utils.c.
+ (main): handle baud rate settings using new facilities from
+ remote-utils.
+ * defs.h (baud_rate): removed extern.
+
+ m88110 support via bug-197 monitor.
+ * remote-bug.c (get_reg_name, bug_fetch_register,
+ bug_store_register): added m88110 extended register support.
+ (wait_strings): added bug-197 prompt.
+ (bug_wait): cope with bug-197 prompt.
+ (start_load): cope with either bug-197 or bug-187 prompt.
+
+
+ * inferior.h, infrun.c, thread.c, infcmd.c: Remove all uses of
+ pc_changed. If it was ever set to a non-zero value, it was before
+ GDB 2.8. It doesn't seem to have any useful function.
+
+ * defs.h: Don't define NORETURN (see comment).
+
+
+ * m88k-nat.c (fill_gregset): Set r31 and sfip.
+
+
+ * remote-udi.c (udi_wait, case UDIStdinNeeded): Use a loop calling
+ getchar() (terminated only on '\n') instead of scanf. Send the
+ '\n' which terminates it to the remote system.
+
+ More gcc lint:
+ * exec.c (ignore): Return 0.
+ * stack.c (return_command): Fetch lazy value directly, not via
+ VALUE_CONTENTS, to avoid "value computed is not used".
+ * inflow.c (new_tty): Move osigttou inside #if.
+
+ * remote.c (remote_fetch_registers): If remote reply is short, just
+ note that fact and keep going (reading extra registers as all bits 0).
+ (remote_store_registers): Send number of registers that were found
+ by remote_fetch_registers.
+ * m68k-tdep.c, config/m68k/tm-m68k.h, config/m68k/tm-*.h: Remove
+ HAVE_68881. Define CANNOT_STORE_REGISTER if ptrace() can't write
+ floating registers.
+ * config/m68k/{tm-m68k-nofp.h,m68k-nofp.mt,tm-m68k-fp.h,m68k-fp.mt}:
+ Remove, replaced by {tm-m68k-em.h,m68k-em.mt}.
+ * Makefile.in, configure.in: Change accordingly.
+
+
+ * mipsread.c (cross_ref): Allow SGI extended symbol types as cross
+ reference targets.
+ * symmisc.c (print_symbol): Use TYPE_TAG_NAME not TYPE_NAME to avoid
+ printing of identities.
+
+
+ * breakpoint.c (breakpoint_1): Deal with step resume breakpoint.
+
+
+ Gcc lint.
+ * config/m88k/tm-m88k.h (frame_find_saved_regs): prototype.
+ * config/h8300/tm-h8300.h (NUM_REGS): rewrite to avoid nested comment.
+ * blockframe.c (get_prev_frame_info): initialize address.
+ * breakpoint.c (bpstat_copy): initialize retval.
+ (bpstat_stop_status): initialize value_is_zero.
+ (bpstat_what): initialize bs_class.
+ (breakpoint_1, mention): add do-nothing case for bp_step_resume.
+ (break_command_1): initialize cond_end, addr_end, &
+ canonical_strings_chain.
+ (enable_breakpoint): initialize save_selected_frame.
+ * buildsym.c (end_symtab): initialize symtab & linetablesize.
+ * c-exp.y (parse_number): initialize i.
+ * c-typeprint.c (c_type_print_varspec_prefix): include
+ TYPE_CODE_BITSTRING in switch statements and do nothing.
+ * c-valprint.c (c_val_print): removed unused variable c.
+ * ch-valprint.c (chill_val_print): removed unused variable eltlen.
+ * cp-valprint.c (cp_print_class_method): initialize f & j.
+ * eval.c (evaluate_subexp): initialize pc2, arg1, arg2.
+ * expprint.c (print_subexp): initialize myprec, assoc, & tempstr.
+ * findvar.c (value_from_register): initialize first_addr.
+ * gdbtypes.c (lookup_struct_elt_type): localize use of temporary
+ variable typename.
+ * infcmd.c (run_stack_dummy): return zero rather than simple
+ return.
+ * infrun.c (wait_for_inferior): initialize stop_sp, prologue_pc.
+ remove symtab, appears unused.
+ (restore_selected_frame): return 1.
+ * mipsread.c (psymtab_to_symtab_1): initialize first_off.
+ (fixup_sigtramp): initialize b0.
+ * printcmd.c (do_examine): initialize val_type.
+ (print_frame_args): initialize b.
+ * ser-tcp.c (tcp_restore): comment out declaration. Appears
+ unused.
+ * ser-unix.c (hardwire_restore): comment out declaration. Appears
+ unused.
+ (hardwire_send_break): moved variable status into ifdef
+ HAVE_SGTTY.
+ (wait_for): moved variable numfds into ifdef HAVE_SGTTY.
+ * serial.h: comment change only.
+ * stabsread.c (rs6000_builtin_type): initialize rettype.
+ (read_range_type): initialize nbits.
+ * stack.c (print_frame_info): remove unused variable numargs.
+ (parse_frame_specification): remove unused variables arg1, arg2,
+ arg3.
+ (return_command): initialize return_value.
+ * symfile.c (cashier_psymtab): initialize pprev.
+ * symtab.c (find_pc_psymbol): initialize best.
+ (lookup_symbol): initialize s.
+ (make_symbol_completion_list): initialize quote_pos.
+ * thread.c: include command.h.
+ (thread_info): static declaration removed; unused.
+ (info_threads_command): fix == vs = typo.
+ * typeprint.c (whatis_exp): initialize old_chain.
+ * valprint.c (val_print_string): remove unused variable
+ first_addr_err. Initialize old_chain.
+ (_initialize_valprint): white space comment change.
+ * values.c (show_values): rewrite if statement to avoid empty
+ body.
+ (vb_match): remove unused variable fieldtype_target_type.
+
+
+ * Makefile.in (mipsread.o): Depend on $(bfd_h).
+
+
+ * gdbserver/Makefile.in (TAGS): config files are in
+ $(srcdir)/../config, not $(srcdir)/config.
+
+ * config/pa/tm-hppa.h: Declare target_read_pc and target_write_pc.
+ (STORE_RETURN_VALUE): Pass the correct offset of the return
+ register to write_register_bytes.
+ * hppa-tdep.c: Use target_write_pc if PCOQ_TAIL_REGNUM was not saved.
+
+
+ * remote.c (remote_wait): Don't call error. Instead, call warning
+ inside a loop. User can ^C to get out.
+
+ * config/m68k/tm-m68k.h (FIX_CALL_DUMMY): Changed name of swapping
+ routine to match BFD name change.
+ * config/z8k/tm-z8k.h (FIX_CALL_DUMMY): Likewise.
+
+
+ * elfread.c: change elf32_symbol_type to elf_symbol_type
+
+
+ * remote.c (remote_wait): Added 'W' and 'N' responses.
+
+
+ * main.c, utils.c: Add comments about immediate_quit.
+
+ * elfread.c (elf_symtab_read): Don't add symbols starting with ".L"
+ to minimal symbols.
+
+ * target.c (pop_target): Don't try to deal with the stack becoming
+ empty. Shouldn't happen and the code that tried was broken.
+
+ * dcache.c: Cast return value from xmalloc.
+
+ * remote.c: Move setting of immediate_quit from remote_open to
+ remote_start_dummy and set it back to zero when done.
+
+
+ * m88k-tdep.c: Remove a bunch of unused #includes.
+
+ * language.h: Add comment about current_language.
+
+ * mips-tdep.c (_initialize_mips_tdep): Change heuristic-fence-post
+ from var_uinteger to var_zinteger.
+
+ * configure.in: Fix typo (delta88r4 -> delta88v4).
+
+ * config/m88k/xm-delta88.h: Don't include sys/siginfo.h. It was
+ to make this work on SVR4 before SVR4 had its own configuration,
+ and it breaks SVR3.
+
+ * config/m88k/tm-delta88v4.h: Define FRAME_CHAIN_VALID_ALTERNATE.
+
+ * config/m88k/delta88v4.h (NATDEPFILES): Remove infptrace.o inftarg.o.
+
+ * config/m88k/xm-dgux.h: Renamed from config/m88k/xm-m88k.h.
+ * config/m88k/m88k.mh: Use xm-dgux.h.
+ * config/m88k/xm-m88k.h: New file, with HOST_BYTE_ORDER,
+ MAKEVA_END and MAKEVA_ARG.
+ * config/m88k/xm-*.h: Include m88k/xm-m88k.h.
+ * printcmd.c: Remove __INT_VARARGS_H code; now in xm-m88k.h.
+
+
+ * remote-udi.c (udi_wait): Call `warning' not `error'.
+
+ * symtab.c (COMPLETION_LIST_ADD_SYMBOL): If the symbol has a
+ demangling, don't put the mangled form in the completion list.
+
+ * symtab.c, symfile.c, c-exp.y, ch-exp.y, m2-exp.y, buildsym.c,
+ symfile.h, stabsread.c, minsyms.c, solib.c, nlmread.c, dwarfread.c
+ partial-stab.h, symmisc.c, gdbtypes.c: Lint. Remove (or put
+ inside #if) unused variables and labels. Fix unclosed comment.
+ Deal with enumeration values unhandled in switch statements. Make
+ sure non-void functions return values. Include appropriate
+ headers.
+ * dbxread.c (elfstab_build_psymtabs): Don't check for unsigned
+ value < 0.
+
+
+ * i960-tdep.c, ns32k-pinsn.c, remote-adapt.c, xcoffread.c:
+ index -> strchr.
+
+
+ * remote.c: Add comment explaining why dcache is disabled.
+ (remote_fetch_word, remote_store_word): Make static and #if 0.
+ They are not called from anywhere.
+
+
+ * arm-tdep.c, convex-tdep.c, convex-xdep.c, dbxread.c,
+ h8300-tdep.c, h8500-tdep.c, i960-pinsn.c, i960-tdep.c,
+ infptrace.c, m88k-tdep.c, mips-tdep.c, regex.c, remote-vx.c,
+ rs6000-tdep.c, xcoffexec.c, xcoffread.c, z8k-tdep.c,
+ config/arm/tm-arm.h, config/convex/tm-convex.h,
+ config/gould/tm-np1.h, config/gould/tm-pn.h,
+ config/m68k/tm-isi.h, config/ns32k/tm-umax.h,
+ config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
+ config/rs6000/tm-rs6000.h, config/tahoe/tm-tahoe.h,
+ config/vax/tm-vax.h: bzero -> memset.
+
+ * regex.c: bcmp -> memcmp.
+
+
+ * symtab.c (find_pc_line, find_line_common),
+ symtab.h (struct linetable), xcoffread.c (arrange_linetable):
+ Revise comments re linetable sorting.
+ * buildsym.c (compare_line_numbers): Sort by pc, not by line.
+ * coffread.c: Tell end_symtab to sort the line table.
+
+ * coffread.c: Re-work a lot of the coff-specific stuff to use stuff
+ in buildsym.c. This includes coff_finish_block, coff_context_stack,
+ coff_local_symbols, coff_file_symbols, coff_global_symbols,
+ coff_end_symtab and coff_add_symbol_to_list.
+ (read_enum_type): Deal with it now that we have a "struct pending"
+ not a "struct coff_pending".
+
+ * buildsym.c (end_symtab): Don't realloc subfile->linetable.
+
+
+ * a68v-nat.c, altos-xdep.c, convex-tdep.c, convex-xdep.c,
+ findvar.c, hppab-nat.c, hppah-nat.c, i386mach-nat.c,
+ irix4-nat.c, m68k-tdep.c, m88k-tdep.c, mipsread.c, regex.c,
+ remote-bug.c, remote-hms.c, rs6000-nat.c, rs6000-tdep.c,
+ sparc-nat.c, stabsread.c, sun3-nat.c, sun386-nat.c, symfile.c,
+ umax-xdep.c, xcoffread.c, 29k-share/udi/udip2soc.c,
+ 29k-share/udi/udr.c, config/a29k/tm-a29k.h, config/arm/tm-arm.h,
+ config/convex/tm-convex.h, config/gould/tm-np1.h,
+ config/gould/tm-pn.h, config/h8300/tm-h8300.h,
+ config/h8500/tm-h8500.h, config/i386/tm-i386aix.h,
+ config/i386/tm-sun386.h, config/i386/tm-symmetry.h,
+ config/i960/tm-i960.h, config/m68k/tm-news.h,
+ config/m88k/tm-m88k.h, config/mips/tm-mips.h,
+ config/ns32k/tm-merlin.h, config/ns32k/tm-umax.h,
+ config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
+ config/rs6000/tm-rs6000.h, config/sh/tm-sh.h,
+ config/tahoe/tm-tahoe.h, config/vax/tm-vax.h,
+ config/z8k/tm-z8k.h, nindy-share/nindy.c: bcopy -> memcpy.
+
* mipsread.c (parse_partial_symbols): Use language from FDR if it
* Makefile.in (REMOTE_O): add dcache.o.
* config/m88k/m88k.mt (TDEPFILES): removed dcache.o.
+ Break dcache code out of remote-nindy.c.
+ * remote-nindy.c: removed dcache code. Changed callers to use new
+ conventions. include dcache.h.
+ (nindy_dcache): new static variable.
+ * config/i960/nindy960.mt (TDEPFILES): added dcache.o.
+
Break dcache code out of remote-bug.c into dcache.[hc].
* Makefile.in (dcache_h): new macro.
(HFILES): added $(dcache_h).
projects / binutils.git / blobdiff