+
+ * sh-dis.c (print_insn_sh): Remove 0x from output to prevent GDB
+ duplicating it.
+
+
+ * configure.in (BFD_MACHINES): Add cgen-bitset.lo for bfd_sh_arch.
+ * configure: Regenerated.
+
+
+ * po/POTFILES.in: Regenerate.
+
+
+ * arm-dis.c (coprocessor_opcodes): The X-qualifier to WMADD may
+ only be used with the default multiply-add operation, so if N is
+ set, don't bother printing X. Add new iwmmxt instructions.
+ (IWMMXT_INSN_COUNT): Update.
+ (iwmmxt_wwssnames): Qualify "wwss" names at index 2, 6, 10 and 14
+ with a 'c' suffix.
+ (print_insn_coprocessor): Check for iWMMXt2. Handle format
+ specifiers 'r', 'i'.
+
+
+ PR binutils/3100
+ * i386-dis.c (prefix_user_table): Fix the second operand of
+ maskmovdqu instruction to allow only %xmm register instead of
+ both %xmm register and memory.
+
+
+ PR binutils/3235
+ * i386-dis.c (OP_OFF64): Get 32bit offset if there is an
+ address size prefix.
+
+
+ * score-dis.c: New file.
+ * score-opc.h: New file.
+ * Makefile.am: Add Score files.
+ * Makefile.in: Regenerate.
+ * configure.in: Add support for Score target.
+ * configure: Regenerate.
+ * disassemble.c: Add support for Score target.
+
+
+ * arm-dis.c: Make use of new STRING_COMMA_LEN and CONST_STRNEQ
+ macros defined in bfd.h.
+ * cris-dis.c: Likewise.
+ * h8300-dis.c: Likewise.
+ * i386-dis.c: Likewise.
+ * ia64-gen.c: Likewise.
+ * mips-dis: Likewise.
+
+
+ * arm-dis.c (neon_opcode): Fix suffix on VMOVN.
+
+
+ * i386-dis.c (three_byte_table): Expand to 256 elements.
+
+
+ PR binutils/3000
+ * i386-dis.c (MXC,EMC): Define.
+ (OP_MXC): New function to handle cvt* (convert instructions) between
+ %xmm and %mm register correctly.
+ (OP_EMC): ditto.
+ (prefix_user_table): Modified cvtpi2pd,cvtpd2pi and cvttpd2pi
+ instruction operands in PREGRP2,PREGRP3,PREGRP4 appropriately
+ with EMC/MXC.
+
+
+ * m68k-opc.c (m68k_opcodes): Fix operand specificer in the Coldfire
+ "fdaddl" entry.
+
+
+ * armd-dis.c (arm_opcodes): Fix rbit opcode.
+
+
+ * i386-dis.c (grps): Change "sldtQ", "strQ" and "smswQ" to
+ "sldt", "str" and "smsw".
+
+
+ PR binutils/2829
+ * i386-dis.c (GRP11_C6): NEW.
+ (GRP11_C7): Likewise.
+ (GRP12): Updated.
+ (GRP13): Likewise.
+ (GRP14): Likewise.
+ (GRP15): Likewise.
+ (GRP16): Likewise.
+ (GRPAMD): Likewise.
+ (GRPPADLCK1): Likewise.
+ (GRPPADLCK2): Likewise.
+ (dis386): Use GRP11_C6 and GRP11_C7 for entres 0xc6 and 0xc7,
+ respectively.
+ (grps): Add entries for GRP11_C6 and GRP11_C7.
+
+
+ * i386-dis.c (dis386): Add support for 4 operand instructions. Add
+ support for amdfam10 SSE4a/ABM instructions. Modify all
+ initializer macros to have additional arguments. Disallow REP
+ prefix for non-string instructions.
+ (print_insn): Ditto.
+
+
+ * arm-dis.c (coprocessor): Alter fmsrr disassembly syntax.
+
+
+ * i386-dis.c (dis386_twobyte): Use "nopQ" for 0x1f.
+ (twobyte_has_modrm): Set 1 for 0x1f.
+
+
+ * i386-dis.c (NOP_Fixup): Removed.
+ (NOP_Fixup1): New.
+ (NOP_Fixup2): Likewise.
+ (dis386): Use NOP_Fixup1 and NOP_Fixup2 on 0x90.
+
+
+ * arm-dis.c (print_insn_neon): Disassemble 32-bit immediates as signed
+ on 64-bit hosts.
+
+
+ * i386.c (GRP10): Renamed to ...
+ (GRP12): This.
+ (GRP11): Renamed to ...
+ (GRP13): This.
+ (GRP12): Renamed to ...
+ (GRP14): This.
+ (GRP13): Renamed to ...
+ (GRP15): This.
+ (GRP14): Renamed to ...
+ (GRP16): This.
+ (dis386_twobyte): Updated.
+ (grps): Likewise.
+
+
+ * po/fi.po: Updated Finnish translation.
+
+
+ * po/Make-in (pdf, ps): New dummy targets.
+
+
+ * arm-dis.c (coprocessor_opcodes): Add %c to unconditional arm
+ instructions.
+ (neon_opcodes): Add conditional execution specifiers.
+ (thumb_opcodes): Ditto.
+ (thumb32_opcodes): Ditto.
+ (arm_conditional): Change 0xe to "al" and add "" to end.
+ (ifthen_state, ifthen_next_state, ifthen_address): New.
+ (IFTHEN_COND): Define.
+ (print_insn_coprocessor, print_insn_neon): Print thumb conditions.
+ (print_insn_arm): Change %c to use new values of arm_conditional.
+ (print_insn_thumb16): Print thumb conditions. Add %I.
+ (print_insn_thumb32): Print thumb conditions.
+ (find_ifthen_state): New function.
+ (print_insn): Track IT block state.
+
+
+ * ppc-dis.c (powerpc_dialect): Handle power6 option.
+ (print_ppc_disassembler_options): Mention power6.
+
+
+ * mips-dis.c: Disassemble DSP64 instructions for MIPS64R2.
+ * mips-opc.c: Add DSP64 instructions.
+
+
+ * m68hc11-dis.c (print_insn): Warning fix.
+
+
+ * po/Make-in (top_builddir): Define.
+
+
+ * Makefile.am: Run "make dep-am".
+ * Makefile.in: Regenerate.
+ * config.in: Regenerate.
+
+
+ * Makefile.am (INCLUDES): Use @INCINTL@.
+ * acinclude.m4: Include new gettext macros.
+ * configure.in: Use ZW_GNU_GETTEXT_SISTER_DIR and AM_PO_SUBDIRS.
+ Remove local code for po/Makefile.
+ * Makefile.in, aclocal.m4, configure: Regenerated.
+
+
+ * po/es.po: Updated Spanish translation.
+
+
+ * m68k-opc.c (m68k_opcodes): Fix the masks of the Coldfire fmovemd
+ and fmovem entries. Put register list entries before immediate
+ mask entries. Use "l" rather than "L" in the fmovem entries.
+ * m68k-dis.c (match_insn_m68k): Remove the PRIV argument and work it
+ out from INFO.
+ (m68k_scan_mask): New function, split out from...
+ (print_insn_m68k): ...here. If no architecture has been set,
+ first try printing an m680x0 instruction, then try a Coldfire one.
+
+
+ * po/ga.po: Updated Irish translation.
+
+
+ * crx-dis.c (EXTRACT): Make macro work on 64-bit hosts.
+
+
+ * po/nl.po: Updated translation.
+
+
+ * avr-dis.c: Formatting fix.
+
+
+ * mips16-opc.c (I1, I32, I64): New shortcut defines.
+ (mips16_opcodes): Change membership of instructions to their
+ lowest baseline ISA.
+
+
+ * i386-dis.c (grps): Update sgdt/sidt for 64bit.
+
+
+ * arm-dis.c (coprocessor_opcodes): Don't interpret fldmx/fstmx as
+ vldm/vstm.
+
+
+ * mips-opc.c: Add macro for cache instruction.
+
+
+ * mips-dis.c (mips_arch_choices): Add smartmips instruction
+ decoding to MIPS32 and MIPS32R2. Limit DSP decoding to release
+ 2 ISAs. Add MIPS3D decoding to MIPS32R2. Add MT decoding to
+ MIPS64R2.
+ * mips-opc.c: fix random typos in comments.
+ (INSN_SMARTMIPS): New defines.
+ (mips_builtin_opcodes): Add paired single support for MIPS32R2.
+ Move bc3f, bc3fl, bc3t, bc3tl downwards. Move flushi, flushd,
+ flushid, wb upwards. Move cfc3, ctc3 downwards. Rework the
+ FP_S and FP_D flags to denote single and double register
+ accesses separately. Move dmfc3, dmtc3, mfc3, mtc3 downwards.
+ Allow jr.hb and jalr.hb for release 1 ISAs. Allow luxc1, suxc1
+ for MIPS32R2. Add SmartMIPS instructions. Add two-argument
+ variants of bc2f, bc2fl, bc2t, bc2tl. Add mfhc2, mthc2 to
+ release 2 ISAs.
+ * mips16-opc.c (mips16_opcodes): Add sdbbp instruction.
+
+
+ * mips-opc.c (mips_builtin_opcodes): Fix mftr argument order.
+
+
+ * mips-dis.c (print_insn_args): Force mips16 to odd addresses.
+ (print_mips16_insn_arg): Force mips16 to odd addresses.
+
+
+ * mips-opc.c (mips_builtin_opcodes): Add udi instructions
+ "udi0" to "udi15".
+ * mips-dis.c (print_insn_args): Adds udi argument handling.
+
+
+ * m68k-dis.c (match_insn_m68k): Restore fprintf_func before printing
+ error message.
+
+
+ * mips-dis.c (mips_cp0sel_names_mips3264r2): Add MT register
+ names.
+
+
+ * mips-dis.c (print_insn_args): Add mips_opcode argument.
+ (print_insn_mips): Adjust print_insn_args call.
+
+
+ * mips-dis.c (print_insn_args): Print $fcc only for FP
+ instructions, use $cc elsewise.
+
+
+ * opcodes/mips-dis.c (mips16_to_32_reg_map, mips16_reg_names):
+ Map MIPS16 registers to O32 names.
+ (print_mips16_insn_arg): Use mips16_reg_names.
+
+
+ * arm-dis.c (print_insn_neon): Disassemble floating-point constant
+ VMOV.
+
+
+ * opcodes/arm-dis.c (coprocessor_opcodes): Add %A, %B, %k, convert
+ %<code>[zy] into %[zy]<code>. Expand meaning of %<bitfield>['`?].
+ Add unified load/store instruction names.
+ (neon_opcode_table): New.
+ (arm_opcodes): Expand meaning of %<bitfield>['`?].
+ (arm_decode_bitfield): New.
+ (print_insn_coprocessor): Add pc argument. Add %A & %B specifiers.
+ Use arm_decode_bitfield and adjust numeric specifiers. Adjust %z & %y.
+ (print_insn_neon): New.
+ (print_insn_arm): Adjust print_insn_coprocessor call. Call
+ print_insn_neon. Use arm_decode_bitfield and adjust numeric specifiers.
+ (print_insn_thumb32): Likewise.
+
+
+ * Makefile.am: Run "make dep-am".
+ * Makefile.in: Regenerate.
+
+
+ * avr-dis.c (avr_operand): Warning fix.
+
+ * configure: Regenerate.
+
* po/POTFILES.in: Regenerated.
projects / binutils.git / blobdiff