* MAINTAINERS: Revert h8300 state to un-deleted.

[binutils.git] / gdb / remote-mips.c

diff --git a/gdb/remote-mips.c b/gdb/remote-mips.c
index 547e37a420e4c2cf623a3829e848b2fa5ee7867d..790b23ea8386593bb2e5e677f99f134af19d0a06 100644 (file)
--- a/gdb/remote-mips.c
+++ b/gdb/remote-mips.c
@@ -3370,56 +3370,60 @@ of the TFTP temporary file, if it differs from the filename seen by the board.";
   add_target (&ddb_ops);
   add_target (&lsi_ops);
 
-  deprecated_add_show_from_set
-    (add_set_cmd ("timeout", no_class, var_zinteger,
-                 (char *) &mips_receive_wait,
-                 "Set timeout in seconds for remote MIPS serial I/O.",
-                 &setlist),
-     &showlist);
-
-  deprecated_add_show_from_set
-    (add_set_cmd ("retransmit-timeout", no_class, var_zinteger,
-                 (char *) &mips_retransmit_wait, "\
-Set retransmit timeout in seconds for remote MIPS serial I/O.\n\
+  add_setshow_zinteger_cmd ("timeout", no_class, &mips_receive_wait, _("\
+Set timeout in seconds for remote MIPS serial I/O."), _("\
+Show timeout in seconds for remote MIPS serial I/O."), NULL,
+                           NULL,
+                           NULL, /* FIXME: i18n: */
+                           &setlist, &showlist);
+
+  add_setshow_zinteger_cmd ("retransmit-timeout", no_class,
+                           &mips_retransmit_wait, _("\
+Set retransmit timeout in seconds for remote MIPS serial I/O."), _("\
+Show retransmit timeout in seconds for remote MIPS serial I/O."), _("\
 This is the number of seconds to wait for an acknowledgement to a packet\n\
-before resending the packet.", &setlist),
-     &showlist);
-
-  deprecated_add_show_from_set
-    (add_set_cmd ("syn-garbage-limit", no_class, var_zinteger,
-                 (char *) &mips_syn_garbage, "\
-Set the maximum number of characters to ignore when scanning for a SYN.\n\
+before resending the packet."),
+                           NULL,
+                           NULL, /* FIXME: i18n: */
+                           &setlist, &showlist);
+
+  add_setshow_zinteger_cmd ("syn-garbage-limit", no_class,
+                           &mips_syn_garbage,  _("\
+Set the maximum number of characters to ignore when scanning for a SYN."), _("\
+Show the maximum number of characters to ignore when scanning for a SYN."), _("\
 This is the maximum number of characters GDB will ignore when trying to\n\
 synchronize with the remote system.  A value of -1 means that there is no\n\
 limit. (Note that these characters are printed out even though they are\n\
-ignored.)",
-                 &setlist),
-     &showlist);
-
-  deprecated_add_show_from_set
-    (add_set_cmd ("monitor-prompt", class_obscure, var_string,
-                 (char *) &mips_monitor_prompt,
-                 "Set the prompt that GDB expects from the monitor.",
-                 &setlist),
-     &showlist);
-
-  deprecated_add_show_from_set
-    (add_set_cmd ("monitor-warnings", class_obscure, var_zinteger,
-                 (char *) &monitor_warnings,
-                 "Set printing of monitor warnings.\n"
-                 "When enabled, monitor warnings about hardware breakpoints "
-                 "will be displayed.",
-                 &setlist),
-     &showlist);
-
-  add_com ("pmon <command>", class_obscure, pmon_command,
-          "Send a packet to PMON (must be in debug mode).");
-
-  deprecated_add_show_from_set
-    (add_set_cmd ("mask-address", no_class,
-                 var_boolean, &mask_address_p, "\
-Set zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets.\n\
-Use \"on\" to enable the masking and \"off\" to disable it.\n",
-                 &setlist),
-     &showlist);
+ignored.)"),
+                           NULL,
+                           NULL, /* FIXME: i18n: */
+                           &setlist, &showlist);
+
+  add_setshow_string_cmd ("monitor-prompt", class_obscure,
+                         &mips_monitor_prompt, _("\
+Set the prompt that GDB expects from the monitor."), _("\
+Show the prompt that GDB expects from the monitor."), NULL,
+                         NULL,
+                         NULL, /* FIXME: i18n: */
+                         &setlist, &showlist);
+
+  add_setshow_zinteger_cmd ("monitor-warnings", class_obscure,
+                           &monitor_warnings, _("\
+Set printing of monitor warnings."), _("\
+Show printing of monitor warnings."), _("\
+When enabled, monitor warnings about hardware breakpoints will be displayed."),
+                           NULL,
+                           NULL, /* FIXME: i18n: */
+                           &setlist, &showlist);
+
+  add_com ("pmon", class_obscure, pmon_command,
+          _("Send a packet to PMON (must be in debug mode)."));
+
+  add_setshow_boolean_cmd ("mask-address", no_class, &mask_address_p, _("\
+Set zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets."), _("\
+Show zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets."), _("\
+Use \"on\" to enable the masking and \"off\" to disable it."),
+                          NULL,
+                          NULL, /* FIXME: i18n: */
+                          &setlist, &showlist);
 }