+
+ * config/tc-mips.c (md_begin): Add the general registers to the
+ symbol table.
+ (mips16_ip): First parse the expression, and then see whether it
+ came up with a register, rather than trying to first see whether
+ we are looking at a register.
+
+start-sanitize-tic80
+
+ * config/tc-tic80.c: Numerous changes and additions to flesh
+ out functions that were previously just stubs, and fix some
+ problems found using the new TIc80 testsuite cases.
+
+end-sanitize-tic80
+
+ * config/tc-mips.c (mips16_ip): Handle %gprel modifier.
+ (md_apply_fix): Handle BFD_RELOC_MIPS16_GPREL.
+
+ * config/tc-mips.c (append_insn): Output jump instruction as a
+ pair of 2 byte instructions, rather than as a single 4 byte
+ instruction.
+
+start-sanitize-r5900
+ * config/tc-mips.c (md_begin): Correct test of mips_5900.
+ (mips_ip): Don't check INSN_ISA for a macro.
+
+end-sanitize-r5900
+start-sanitize-r5900
+
+ * config/tc-mips.c: added r5900.
+
+end-sanitize-r5900
+
+ * itbl-ops.c, itbl-lex.l, itbl-parse.y, itbl-ops.h,
+ config/itbl-mips.h: Add copyright message and fix indentation.
+
+
+ * itbl-ops.c: New file. Add support for dynamically read
+ instruction registers, opcodes and formats. Build internal table
+ for new instructions and provide callbacks for assembler and
+ disassembler.
+ * itbl-lex.l, itbl-parse.y: Lex and yacc parsers for instruction
+ spec table.
+ * itbl-ops.h: New file. Header file for itbl support.
+ * config/itbl-mips.h: New file. Mips specific definitions for
+ itbl support.
+
+
+ * config/tc-mn10200.c (md_assemble): If a constant operand won't
+ fit into the constant field of a relaxable operand, then it does
+ not match.
+
+
+ * config/tc-mn10200.c (md_estimate_size_before_relax): Treat
+ a jsr target in a different section just like a jsr to
+ an undefined target.
+
+
+ * config/tc-mips.c (mips_fix_adjustable): Don't adjust relocations
+ against any mips16 symbols, not just externally visible ones.
+ (md_apply_fix): Corresponding change.
+
+
+ * config/tc-mips.c (mips16_ip): Accept floating point registers in
+ the operand of the exit instruction.
+
+
+ * symbols.c (resolve_symbol_value): If we leave an equated symbol
+ as O_symbol, copy over the segment.
+
+
+ * config/tc-mips.c (md_apply_fix): If we aren't adjusting this
+ fixup to be against the section symbol, adjust the value
+ accordingly.
+
+ * symbols.c (resolve_symbol_value): Don't change X_add_number for
+ an equated symbol.
+ * write.c (write_relocs): Avoid looping on equated symbols.
+ Adjust fx_offset by X_add_number for each symbol.
+ * config/obj-coff.c (do_relocs_for): Avoid looping on equated
+ symbols.
+ (fixup_segment): Add a loop to track down equated symbols and
+ adjust fx_offset appropriately.
+
+
+ * config/tc-mn10200.c (md_relax_table): Add entries to allow
+ jmp -> bra relaxing.
+ (md_convert_frag): Handle jmp->bra relaxing.
+ (md_assemble): Handle jmp->bra relaxing.
+ (md_estimate_size_before_relax): Likewise.
+
+
+ * config/tc-i386.c (i386_align_code): Add comments explaining the
+ nop instructions.
+
+
+ * config/tc-sparc.c (enforce_aligned_data): New static variable.
+ (sparc_cons_align): Don't do anything unless enforce_aligned_data
+ is set.
+ (md_longopts): Add "enforce-aligned-data".
+ (md_show_usage): Mention --enforce-aligned-data.
+ * doc/c-sparc.texi (Sparc-Aligned-Data): New node; document
+ enforce-aligned-data.
+
+ * config/tc-ppc.c (md_pseudo_table): If OBJ_XCOFF, add "long",
+ "word", and "short".
+ (ppc_xcoff_cons): New static function.
+
+ * write.c (relax_segment): Give an error if a .space symbol is
+ common or undefined.
+
+ * read.c (read_a_source_file): Don't handle mri_pending_align if
+ the handler is s_globl or s_ignore.
+
+
+ * config/tc-d10v.c (find_opcode): Remove unused variable "numops".
+start-sanitize-tic80
+ * config/tc-tic80.c: Many additions to previous placeholder file.
+ * config/tc-tic80.h: Ditto.
+end-sanitize-tic80
+
+
+ * config/tc-i386.c (i386_align_code): Improve the nop patterns.
+
+
+ * config/tc-mips.c (mips_fix_adjustable): New function.
+ * config/tc-mips.h (tc_fix_adjustable): Call mips_fix_adjustable.
+ (mips_fix_adjustable): Declare.
+
+ * read.c (read_a_source_file): After doing an mri_pending_align,
+ adjust the line_label if there is one.
+ (s_space): Set mri_pending_align if an odd number of bytes were
+ output.
+
+start-sanitize-d10v
+
+ * config/tc-d10v.h (md_do_align): Add this hook to call
+ d10v_cleanup() when a ".align" is detected. Fixes PR11487.
+
+ * config/tc-d10v.c (find_opcode): Correctly calculate
+ branch displacement when .aligns are present.
+
+end-sanitize-d10v
+
+ * config/tc-mn10200.c (md_relax_table): Define.
+ (md_convert_frag): Implement.
+ (md_assemble): Handle relaxable operands/instructions correctly.
+ (md_estimate_size_before_relax): Implement.
+ * config/tc-mn10200.h (TC_GENERIC_RELAX_TABLE): Define.
+
+
+ * config/tc-mips.c (append_insn): Give an error for jumps to a
+ misaligned address.
+ (md_apply_fix): Make a branch to an odd address an error rather
+ than a warning.
+
+ * config/tc-mips.c (md_convert_frag): If the user explicitly
+ requested an extended opcode, pass warn as true to mips16_immed.
+
+ * config/tc-mips.c (mips16_ip): Handle a missing expression like
+ an explicit 0, so that explicitly extended instructions work
+ correctly.
+
+
+ * ecoff.c (ecoff_build_symbols): Don't generate a local ECOFF
+ symbol for a common symbol.
+
+
+ Patch presumed to have been checked in awhile ago but wasn't.
+ * write.c: Delete "ifndef md_relax_frag" around is_dnrange.
+ (relax_segment, case rs_org): Move code inside braces. Move locals
+ target,after inside too.
+ (relax_segment, case rs_machine_dependent): Guts moved to ...
+ (relax_frag): New function.
+ Call md_prepare_relax_scan if defined.
+
+
+ * config/tc-m68k.c (m68k_ip): Reject pc-relative addresses for the
+ 'p' operand specifier.
+
+
+ * config/tc-m68k.c (HAVE_LONG_BRANCH): New macro, returns true for
+ m68k family cpus which support long branch addressing modes.
+ (m68k_ip, md_convert_frag_1, md_estimate_size_before_relax,
+ md_create_long_jump): Use it.
+
+
+ * config/tc-mips.c (md_begin): Don't set SEC_ALLOC or SEC_LOAD for
+ the .reginfo or .MIPS.options section if configured for an
+ embedded target.
+
+ * config/tc-mips.c (md_begin): Don't set interlocks for
+ mips_4650.
+
+
+ * read.c (read_a_source_file): Make sure the symbol ends with
+ whitespace before checking whether the next character is '='.
+
+
+ * config/tc-i386.c (sco_id): Moved from here...
+ * config/obj-elf.c (sco_id): ...to here. Adding the identifier
+ really is an SCO ELF specific thing, not just a SCO x86 specific
+ thing.
+
+start-sanitize-tic80
+
+ * configure.in (tic80-*-*): Don't require 'coff'.
+ * configure: Regenerate.
+
+end-sanitize-tic80
+
+ * read.c (emit_expr): Check for overflow of a negative value
+ correctly.
+ * write.c (fixup_segment): Likewise.
+ * config/obj-coff.c (fixup_segment): Likewise.
+
+ * config/tc-m68k.c (struct label_line): Define.
+ (labels, current_label): New static variables.
+ (md_assemble): Mark current_label as text, and clear it.
+ (m68k_frob_label): New function.
+ (m68k_flush_pending_output): New function.
+ (m68k_frob_symbol): New function.
+ * config/tc-m68k.h (tc_frob_label): Define.
+ (md_flush_pending_output): Define.
+ (tc_frob_symbol): Don't warn, just call m68k_frob_symbol.
+ (tc_frob_coff_symbol): Likewise.
+
+ * read.c (read_a_source_file): When defining a macro in MRI mode,
+ don't add the symbol to the symbol table.
+
+
+ * config/tc-mn10300.c (tc_gen_reloc): Handle sym1-sym2 fixups
+ here since fixup_segment doesn't (linkrelax is set).
+ * config/tc-mn10200.c (tc_gen_reloc): Likewise.
+
+
+ * config/tc-mn10200.c (md_assemble): Tweak fx_offset for pc-relative
+ relocs.
+
+
+ * config/tc-hppa.c (struct hppa_fix_struct): Tweak fx_r_field's type
+ to avoid warnings with the native HP compiler.
+ (fix_new_hppa): Similarly for the r_type argument.
+ (pa_build_unwind_subspace, hppa_elf_mark_end_of_function): Enclose
+ in an #if OBJ_ELF to keep gcc -Wall quiet.
+ (md_apply_fix): Always initialize "result".
+
+ * config/tc-mn10200.c (md_assemble): Generate relocations.
+
+
+ * config/tc-m68k.c (s_even): Adjust the alignment of the current
+ section.
+
+
+ * config/obj-elf.c (elf_file_symbol): When using ECOFF debugging,
+ pass on the new file hook.
+
+ * config/tc-alpha.c (alpha_fix_adjustable): Not quite the same as
+ !alpha_force_relocation, as local LITERALs can be adjusted to be
+ relative to the section.
+
+
+ * config/obj-coff.c (yank_symbols): If tc_frob_coff_symbol is
+ defined, call it.
+ * config/tc-m68k.h (tc_frob_symbol): Check whether text label is
+ aligned to odd boundary.
+ (tc_frob_coff_symbol): Define.
+
+ * doc/as.texinfo (Set): Change parenthesized @xref to @pxref.
+
+ * macro.c (macro_expand_body): In MRI mode, just copy a single &.
+
+ * config/tc-m68k.c (m68k_ip): Call frag_grow before adding a
+
+ * config/tc-m68k.c (m68k_ip): Accept 'B' as a size for an
+ immediate value.
+ (md_assemble): If the size is 'B', set fx_signed.
+ (md_apply_fix_2): Use fx_signed when checking for overflow.
+
+ * write.h (struct fix): Add fx_signed field.
+ * write.c (fix_new_internal): Initialize fx_no_overflow and
+ fx_signed fields.
+ (fixup_segment): Use fx_signed when checking for overflow.
+ * config/obj-coff.c (fixup_segment): Check fx_no_overflow and
+ fx_signed when checking for overflow.
+
+ * NOTES, NOTES.config: Removed. These are rarely, if ever,
+ updated, and all the useful information is in doc/internals.texi.
+
+ * read.c (read_a_source_file): Check for conditional operators
+ before doing an MRI pending alignment.
+ * config/tc-m68k.h (m68k_conditional_pseudoop): Declare.
+ (tc_conditional_pseudop): Define.
+ * config/tc-m68k.c (m68k_conditional_pseudop): New function.
+ * doc/internals.texi (CPU backend): Describe
+ tc_conditional_pseudoop.
+
+ * config/tc-m68k.c (m68k_rel32_from_cmdline): New static
+ variable.
+ (md_begin): Check m68k_rel32_from_cmdline before setting
+ m68k_rel32.
+ (m68k_mri_mode_change): Likewise.
+ (md_longopts): Add --disp-size-default-16 and
+ --disp-size-default-32.
+ (md_parse_option): Handle new options.
+ (md_show_usage): Mention new options.
+ * doc/c-m68k.texi (M68K-Opts): Document new options.
+
+ * config/tc-m68k.c (m68k_index_width_default): New static
+ variable.
+ (m68k_ip): Use m68k_index_width_default to set the size of a base
+ register whose size was not given.
+ (md_longopts): Add --base-size-default-16 and
+ --base-size-default-32.
+ (md_parse_option): Handle new options.
+ (md_show_usage): Mention new options.
+ * doc/c-m68k.texi (M68K-Opts): Document new options.
+
+ * doc/c-mips.texi: Mention ISA level 4, and the -mips16 option.
+
* configure.in: Recognize mips-*-linux* target.
* configure: Rebuild.
projects / binutils.git / blobdiff