+start-sanitize-d10v
+
+ * d10v-dis.c (dis_long): Handle unknown opcodes.
+
+
+ * d10v-opc.c: Changes to support signed and unsigned numbers.
+ All instructions with the same name that have long and short forms
+ now end in ".l" or ".s". Divs added.
+ * d10v-dis.c: Changes to support signed and unsigned numbers.
+
+
+ * d10v-dis.c: Change all functions to use info->print_address_func.
+
+end-sanitize-d10v
+
+ * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
+ move ccr/sr insns more strict so that the disassembler only
+ selects them when the addressing mode is data register.
+
+start-sanitize-d10v
+ * d10v-opc.c (pre_defined_registers): Declare.
+ * d10v-dis.c (print_operand): Now uses pre_defined_registers
+ to pick a better name for the registers.
+
+end-sanitize-d10v
+
+ * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
+ operands for fexpand and fpmerge. From Christian Kuehnke
+
+
+ * alpha-dis.c (print_insn_alpha): No longer the user-visible
+ print routine. Take new regnames and cpumask arguments.
+ Kill the environment variable nonsense.
+ (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
+ (print_insn_alpha_vms): New function. Do VMS style regnames.
+ * disassemble.c (disassembler): Test bfd flavour to pick
+ between OSF and VMS routines. Default to OSF.
+
+
+ * configure.in: Call AC_SUBST (INSTALL_SHLIB).
+ * configure: Rebuild.
+ * Makefile.in (install): Use @INSTALL_SHLIB@.
+
+start-sanitize-d10v
+
+ * configure: (bfd_d10v_arch) Add new case.
+ * configure.in: (bfd_d10v_arch) Add new case.
+ * d10v-dis.c: New file.
+ * d10v-opc.c: New file.
+ * disassemble.c (disassembler) Add entry for d10v.
+
+end-sanitize-d10v
+
+ * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
+ to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
+
+
+ * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
+ distinguish between variants of the instruction set.
+ * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
+ distinguish between variants of the instruction set.
+
+
+ * i386-dis.c (print_insn_i8086): New routine to disassemble using
+ the 8086 instruction set.
+ * i386-dis.c: General cleanups. Make most things static. Add
+ prototypes. Get rid of static variables aflags and dflags. Pass
+ them as args (to almost everything).
+
+
+ * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
+
+ * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
+
+ * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
+ if the next arg is marked with SRC_IN_DST. Gross.
+
+ * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
+ we're looking for and find EXR.
+
+ * h8300-dis.c (bfd_h8_disassemble): We don't have a match
+ if we're looking for KBIT and we don't find it.
+
+ * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
+ for L_3 and L_2.
+
+ * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
+ 3bit immediate operands.
+
+
+ * Released binutils 2.7.
+
+ * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
+
+
+ * alpha-opc.c: Correct second case of "mov" to use OPRL.
+
+
+ * sparc-dis.c (print_insn_sparclite): New routine to print
+ sparclite instructions.
+
+
+ * m68k-opc.c (m68k_opcodes): Add coldfire support.
+
+
+ * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
+ #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
+ to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
+
+
+ * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
+ Use autoconf-set values.
+ (docdir, oldincludedir): Removed.
+ * configure.in (AC_PREREQ): autoconf 2.5 or higher.
+
+
+ * alpha-opc.c: New file.
+ * alpha-opc.h: Remove.
+ * alpha-dis.c: Complete rewrite to use new opcode table.
+ * configure.in: For bfd_alpha_arch, use alpha-opc.o.
+ * configure: Rebuild with autoconf 2.10.
+ * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
+ (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
+ alpha-opc.h.
+ (alpha-opc.o): New target.
+
+
+ * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
+ Set imm_added_to_rs1 even if the source and destination register
+ are not the same.
+
+ * sparc-opc.c: Add some two operand forms of the wr instruction.
+
+
+ * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
+ to just "mode".
+
+ * disassemble.c (disassembler): Handle H8/S.
+ * h8300-dis.c (print_insn_h8300s): New function for H8/S.
+
+
+ * sparc-opc.c: Add beq/teq as aliases for be/te.
+
+ * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
+
+
+ * makefile.vms: New file.
+
+ * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
+
+
+ * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
+ regardless of plen.
+
+
+ * i386-dis.c (OP_OFF): Call append_prefix.
+
+
+ * ppc-opc.c (instruction encoding macros): Add explicit casts to
+ unsigned long to silence a warning from the Solaris PowerPC
+ compiler.
+
+
+ * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
+
+
+ * sparc-dis.c (X_IMM,X_SIMM): New macros.
+ (X_IMM13): Delete.
+ (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
+ * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
+ Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
+ cpush, cpusha, cpull sparclet insns.
+
+
+ * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
+
+
+ * sparc-opc.c: Set F_FBR on floating point branch instructions.
+ Set F_FLOAT on other floating point instructions.
+
+
+ * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
+ registers.
+ (powerpc_opcodes): Add 860/821 specific SPRs.
+
+
+ * configure.in: Permit --enable-shared to specify a list of
+ directories. Set and substitute BFD_PICLIST.
+ * configure: Rebuild.
+ * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
+ uses. Set to @BFD_PICLIST@.
+
+
+ * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
+ not "abs", which may be needed for the absolute in something
+ like btst #0,@10:8. Print L_3 immediates separately from other
+ immediates. Change ABSMOV reference to ABS8MEM.
+
+
+ * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
+ (current_arch_mask): New static global.
+ (compute_arch_mask): New static function.
+ (print_insn_sparc): Delete sparc_v9_p. New static local
+ current_mach. Resort opcode table if current_mach changes.
+ Generalize "insn not supported" test.
+ (compare_opcodes): Prefer supported opcodes to nonsupported ones.
+ Delete test for v9/!v9.
+ * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
+ (v6notlet): Define.
+ (brfc): Split into CBR and FBR for coprocessor/fp branches.
+ (brfcx): Renamed to FBRX.
+ (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
+ coprocessor mnemonics are not supported on the sparclet).
+ (condf): Renamed to CONDF.
+ (SLCBCC2): Delete F_ALIAS flag.
+
+
+ * sparc-opc.c (sparc_opcodes): rd must be 0 for
+ mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
+
+
+ * Makefile.in (config.status): Depend upon BFD VERSION file, so
+ that the shared library version number is set correctly.
+
+
+ * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
+ * configure: Rebuild.
+
+
+ * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
+ malloc.
+
+
+ * configure: Rebuild with autoconf 2.8.
+
+
+ * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
+ * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
+
+
+ * configure.in: Don't set SHLIB or SHLINK to an empty string,
+ since they appear as targets in Makefile.in.
+ * configure: Rebuild.
+
+
+ * mpw-make.sed: Edit out shared library support bits.
+
+
+ * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
+ (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
+ (sparc_opcodes): Add sparclet insns.
+ (sparclet_cpreg_table): New static local.
+ (sparc_{encode,decode}_sparclet_cpreg): New functions.
+ * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
+
+
+ * i386-dis.c (index16): New static variable.
+ (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
+ other way around.
+ (OP_indirE): Return result of OP_E.
+ (OP_E): Check for 16 bit addressing mode, and disassemble
+ correctly. Optimised 32 bit case a little. Don't print
+ "(base,index,scale)" when sib specifies only an offset.
+
+
+ * configure.in: Set and substitute SHLIB_DEP.
+ * configure: Rebuild.
+ * Makefile.in (SHLIB_DEP): New variable.
+ (LIBIBERTY_LISTS, BFD_LIST): New variables.
+ (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
+ COMMON_SHLIB, add them to piclist with appropriate modifications.
+ ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
+ here: just use piclist.
+
+
+ * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
+ (print_insn_sparc): Rewrite v9/not-v9 tests.
+ (compare_opcodes): Likewise.
+ * sparc-opc.c (MASK_<ARCH>): Define.
+ (v6,v7,v8,sparclite,v9,v9a): Redefine.
+ (sparclet,v6notv9): Define.
+ (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
+ (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
+
+
+ * configure.in: Call AC_PROG_CC before configure.host.
+ * configure: Rebuild.
+
+ * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
+
+
+ * i386-dis.c (onebyte_has_modrm): New static array.
+ (twobyte_has_modrm): New static array.
+ (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
+
+
+ * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
+ $(SHLINK).
+
+
+ * ppc-opc.c (PPC): Undef, so default defination on Windows NT
+ doesn't conflict.
+
+
+ * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
+ m68010up, not just m68020up | cpu32.
+
+ * Makefile.in (SONAME): New variable.
+ ($(SHLINK)): Make a link to the transformed name, as well.
+ (stamp-tshlink): New target.
+ (install): Skip stamp-tshlink during install.
+
+
+ * configure.in: Call AC_ARG_PROGRAM.
+ * configure: Rebuild.
+ * Makefile.in (program_transform_name): New variable.
+ (install): Transform library name before installing it.
+
+ * i960-dis.c (mem): Add HX dcinva instruction.
+
Support for building as a shared library, based on patches from
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
sparse_tabent.
(ea): Local static array scale_tab now const.
- start-sanitize-i960xl
- * i960-dis.c (reg): Added i960XL instructions to reg_init table.
+ * i960-dis.c (reg): Added i960JX instructions to reg_init table.
(REG_MAX): Updated.
- end-sanitize-i960xl
projects / binutils.git / blobdiff