# The commands we test here produce many lines of output; disable "press
# <return> to continue" prompts.
-send_gdb "set height 0\n"
-gdb_expect -re "$gdb_prompt $"
+gdb_test_no_output "set height 0"
#
# break at main
# annotate-record
# annotate-breakpoints-table-end
#
-send_gdb "info break\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-headers\r\n\r\n\032\032field 0\r\nNum \r\n\032\032field 1\r\nType \r\n\032\032field 2\r\nDisp \r\n\032\032field 3\r\nEnb \r\n\032\032field 4\r\nAddress +\r\n\032\032field 5\r\nWhat\r\n\r\n\032\032breakpoints-table\r\n\r\n\032\032record\r\n\r\n\032\032field 0\r\n1 \r\n\032\032field 1\r\nbreakpoint \r\n\032\032field 2\r\nkeep \r\n\032\032field 3\r\ny \r\n\032\032field 4\r\n$hex +\r\n\032\032field 5\r\nin main at ${escapedsrcfile}:$main_line\r\n\r\n\032\032breakpoints-table-end\r\n$gdb_prompt$" \
- {pass "breakpoint info"}
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-headers\r\n\r\n\032\032field 0\r\nNum \r\n\032\032field 1\r\nType \r\n\032\032field 2\r\nDisp \r\n\032\032field 3\r\nEnb \r\n\032\032field 4\r\nAddress +\r\n\032\032field 5\r\nWhat\r\n\r\n\032\032breakpoints-table\r\n\r\n\032\032record\r\n\r\n\032\032field 0\r\n1 \r\n\032\032field 1\r\nbreakpoint \r\n\032\032field 2\r\nkeep \r\n\032\032field 3\r\ny \r\n\032\032field 4\r\n$hex +\r\n\032\032field 5\r\nin main at .*${srcfile}:$main_line\r\n\r\n\032\032breakpoints-table-end\r\n$gdb_prompt$" \
- { setup_xfail "*-*-*" 1270
- fail "breakpoint info"}
- -re ".*$gdb_prompt$" { fail "breakpoint info" }
- timeout { fail "breakpoint info (timeout)" }
+gdb_test_multiple "info break" "breakpoint info" {
+ -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-headers\r\n\r\n\032\032field 0\r\nNum \r\n\032\032field 1\r\nType \r\n\032\032field 2\r\nDisp \r\n\032\032field 3\r\nEnb \r\n\032\032field 4\r\nAddress +\r\n\032\032field 5\r\nWhat\r\n\r\n\032\032breakpoints-table\r\n\r\n\032\032record\r\n\r\n\032\032field 0\r\n1 \r\n\032\032field 1\r\nbreakpoint \r\n\032\032field 2\r\nkeep \r\n\032\032field 3\r\ny \r\n\032\032field 4\r\n$hex +\r\n\032\032field 5\r\nin main at ${escapedsrcfile}:$main_line\r\n\r\n\032\032breakpoints-table-end\r\n$gdb_prompt$" {
+ pass "breakpoint info"
+ }
+ -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-headers\r\n\r\n\032\032field 0\r\nNum \r\n\032\032field 1\r\nType \r\n\032\032field 2\r\nDisp \r\n\032\032field 3\r\nEnb \r\n\032\032field 4\r\nAddress +\r\n\032\032field 5\r\nWhat\r\n\r\n\032\032breakpoints-table\r\n\r\n\032\032record\r\n\r\n\032\032field 0\r\n1 \r\n\032\032field 1\r\nbreakpoint \r\n\032\032field 2\r\nkeep \r\n\032\032field 3\r\ny \r\n\032\032field 4\r\n$hex +\r\n\032\032field 5\r\nin main at .*${srcfile}:$main_line\r\n\r\n\032\032breakpoints-table-end\r\n$gdb_prompt$" {
+ setup_xfail "*-*-*" 1270
+ fail "breakpoint info"
+ }
}
#
#exp_internal 1
set binexp [string_to_regexp $binfile]
-send_gdb "run\n"
-gdb_expect {
+gdb_test_multiple "run" "run until main breakpoint" {
-re "\r\n\032\032post-prompt\r\nStarting program: $binexp \(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)+\r\n\r\n\032\032starting\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)*\r\n\r\n\032\032breakpoint 1\r\n\r\nBreakpoint 1, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*annota1.c\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$main_line\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*$srcfile:$main_line:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped.*$gdb_prompt$" {
pass "run until main breakpoint"
}
- -re ".*$gdb_prompt$" {
- fail "run until main breakpoint"
- }
- timeout {
- fail "run until main breakpoint (timeout)"
- }
- }
+}
#exp_internal 0
#exit 0
# We don't care about the annotated output for this operation, it is the same as
# the one produced by run above
#
-send_gdb "next\n"
-gdb_expect {
- -re ".*$gdb_prompt$" { pass "go after array init line" }
- timeout { fail "go after array init line (timeout)" }
+gdb_test_multiple "next" "go after array init line" {
+ -re "source .*annota1.c.*$gdb_prompt$" {
+ pass "go after array init line"
+ }
}
# FIXME: annotate-value-begin and annotate-value-end not tested (the gdb output
# command would cause them to be used)
#
-send_gdb "print my_array\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032value-history-begin 1 -\r\n.*= \r\n\032\032value-history-value\r\n.\r\n\032\032array-section-begin 0 -\r\n1\r\n\032\032elt\r\n, 2\r\n\032\032elt\r\n, 3\r\n\032\032elt\r\n\r\n\032\032array-section-end\r\n.\r\n\r\n\032\032value-history-end\r\n$gdb_prompt$" \
- { pass "print array" }
- -re ".*$gdb_prompt$" { fail "print array" }
- timeout { fail "print array (timeout)" }
+gdb_test_multiple "print my_array" "print array" {
+ -re "\r\n\032\032post-prompt\r\n\r\n\032\032value-history-begin 1 -\r\n.*= \r\n\032\032value-history-value\r\n.\r\n\032\032array-section-begin 0 -\r\n1\r\n\032\032elt\r\n, 2\r\n\032\032elt\r\n, 3\r\n\032\032elt\r\n\r\n\032\032array-section-end\r\n.\r\n\r\n\032\032value-history-end\r\n$gdb_prompt$" {
+ pass "print array"
+ }
}
#
#exp_internal 1
-send_gdb "print non_existent_value\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032error-begin\r\nNo symbol \"non_existent_value\" in current context.\r\n\r\n\032\032error\r\n$gdb_prompt$" \
- { pass "print non_existent_value" }
- -re ".*$gdb_prompt$" { fail "print non_existent_value" }
- timeout { fail "print non_existent_value (timeout)" }
+gdb_test_multiple "print non_existent_value" "print non_existent_value" {
+ -re "\r\n\032\032post-prompt\r\n\r\n\032\032error-begin\r\nNo symbol \"non_existent_value\" in current context.\r\n\r\n\032\032error\r\n$gdb_prompt$" {
+ pass "print non_existent_value"
+ }
}
# break at signal handler. So that, once we are in the sig handler, if we do a bt
# we can test annotate-signal-handler-caller
#
-send_gdb "break handle_USR1\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n$gdb_prompt$" \
- { pass "break handle_USR1" }
- -re ".*$gdb_prompt$" { fail "break handle_USR1" }
- timeout { fail "break handle_USR1 (timeout)" }
+gdb_test_multiple "break handle_USR1" "break handle_USR1" {
+ -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n$gdb_prompt$" {
+ pass "break handle_USR1"
+ }
}
#
# break at printf. When we are stopped at printf, we can test
#
-send_gdb "break printf\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" \
- { pass "break printf" }
- -re "\r\n\032\032post-prompt\r\nwarning: Breakpoint address adjusted from $hex to $hex.\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" \
- { pass "break printf" }
- -re ".*$gdb_prompt$" { fail "break printf" }
- timeout { fail "break printf (timeout)" }
+gdb_test_multiple "break printf" "break printf" {
+ -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" {
+ pass "break printf"
+ }
+ -re "\r\n\032\032post-prompt\r\nwarning: Breakpoint address adjusted from $hex to $hex.\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" {
+ pass "break printf"
+ }
}
#
# annotate-frame-address-end
#
set pat_begin "\r\n\032\032post-prompt\r\n\r\n\032\032frame-begin 0 $hex\r\n.0 \r\n(\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n)*\032\032frame-function-name\r\n.*printf(@.*)?\r\n\032\032frame-args\r\n \\(.*frame-end\r\n\r\n\032\032frame-begin 1 $hex\r\n.1 \r\n\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n"
+
set pat_end "\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032frame-end\r\n(\r\n\032\032frame-begin .*\r\n\r\n\032\032frame-end\r\n)*$gdb_prompt$"
-send_gdb "backtrace\n"
-gdb_expect {
- -re "$pat_begin$escapedsrcfile$pat_end"
- { pass "backtrace from shlibrary" }
- -re "$pat_begin.*$srcfile$pat_end"
- { setup_xfail "*-*-*" 1270
- fail "backtrace from shlibrary" }
- -re ".*$gdb_prompt$" { fail "backtrace from shlibrary" }
- timeout { fail "backtrace from shlibrary (timeout)" }
+
+gdb_test_multiple "backtrace" "backtrace from shlibrary" {
+ -re "$pat_begin$escapedsrcfile$pat_end" {
+ pass "backtrace from shlibrary"
+ }
+ -re "$pat_begin.*$srcfile$pat_end" {
+ setup_xfail "*-*-*" 1270
+ fail "backtrace from shlibrary"
+ }
}
unsupported "send SIGUSR1"
unsupported "backtrace @ signal handler"
} else {
- send_gdb "signal SIGUSR1\n"
- gdb_expect {
- -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${escapedsrcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
- { pass "send SIGUSR1" }
- -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
- { setup_xfail "*-*-*" 1270
- fail "send SIGUSR1" }
- -re ".*$gdb_prompt$" { fail "send SIGUSR1" }
- timeout { fail "send SIGUSR1 (timeout)" }
+ gdb_test_multiple "signal SIGUSR1" "send SIGUSR1" {
+ -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${escapedsrcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
+ pass "send SIGUSR1"
+ }
+ -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
+ setup_xfail "*-*-*" 1270
+ fail "send SIGUSR1"
+ }
}
#
# test:
# annotate-signal-handler-caller
#
- send_gdb "backtrace\n"
- gdb_expect {
+ gdb_test_multiple "backtrace" "backtrace @ signal handler" {
-re "frame-begin 0 $hex\r\n#0.*frame-end.*frame-begin 1 $hex\r\n#1.*(\032\032signal-handler-caller\r\n.signal handler called.\r\n\r\n)+\032\032frame-end\r\n\r\n\032\032frame-begin 2 $hex\r\n#2.*(frame-begin 3 $hex\r\n#3.*)*frame-end.*$gdb_prompt$" {
pass "backtrace @ signal handler"
}
- -re ".*$gdb_prompt$" { fail "backtrace @ signal handler" }
- timeout { fail "backtrace @ signal handler (timeout)" }
}
}
#
# delete all the breakpoints
#
-send_gdb "delete 1\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" \
- { pass "delete bp 1" }
- -re ".*$gdb_prompt$" { fail "delete bp 1" }
- timeout { fail "delete bp 1 (timeout)" }
+gdb_test_multiple "delete 1" "delete bp 1" {
+ -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" {
+ pass "delete bp 1"
+ }
}
-send_gdb "delete 2\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" \
- { pass "delete bp 2" }
- -re ".*$gdb_prompt$" { fail "delete bp 2 " }
- timeout { fail "delete bp 2 (timeout)" }
+gdb_test_multiple "delete 2" "delete bp 2" {
+ -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" {
+ pass "delete bp 2"
+ }
}
-send_gdb "delete 3\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" \
- { pass "delete bp 3" }
- -re ".*$gdb_prompt$" { fail "delete bp 3" }
- timeout { fail "delete bp 3 (timeout)" }
+gdb_test_multiple "delete 3" "delete bp 3" {
+ -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" {
+ pass "delete bp 3"
+ }
}
#
# break at main, after value is initialized. This is in preparation
# to test the annotate output for the display command.
#
-send_gdb "break main\n"
-gdb_expect {
- -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file ${escapedsrcfile}, line $main_line.*$gdb_prompt$" \
- { pass "break at 28" }
- -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file .*${srcfile}, line $main_line.*$gdb_prompt$" \
- { setup_xfail "*-*-*" 1270
- fail "break at 28" }
- -re ".*$gdb_prompt$" { fail "break at 28" }
- timeout { fail "break at 28 (timeout)" }
+gdb_test_multiple "break main" "break at 28" {
+ -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file ${escapedsrcfile}, line $main_line.*$gdb_prompt$" {
+ pass "break at 28"
+ }
+ -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file .*${srcfile}, line $main_line.*$gdb_prompt$" {
+ setup_xfail "*-*-*" 1270
+ fail "break at 28"
+ }
}
#
# annotate-display-end
# FIXME: annotate-display-value not tested
#
-send_gdb "display value\n"
-gdb_expect {
- -re "post-prompt\r\n\r\n\032\032display-begin\r\n1\r\n\032\032display-number-end\r\n: \r\n\032\032display-format\r\n\r\n\032\032display-expression\r\nvalue\r\n\032\032display-expression-end\r\n = \r\n\032\032display-expression\r\n7\r\n\r\n\032\032display-end\r\n$gdb_prompt$" \
- { pass "set up display" }
- -re ".*$gdb_prompt$" { fail "set up display" }
- timeout { fail "set up display (timeout)" }
+gdb_test_multiple "display value" "set up display" {
+ -re "post-prompt\r\n\r\n\032\032display-begin\r\n1\r\n\032\032display-number-end\r\n: \r\n\032\032display-format\r\n\r\n\032\032display-expression\r\nvalue\r\n\032\032display-expression-end\r\n = \r\n\032\032display-expression\r\n7\r\n\r\n\032\032display-end\r\n$gdb_prompt$" {
+ pass "set up display"
+ }
}
# Test that breakpoints-invalid is issued once and only once for
# breakpoint ignore count changes, after annotation stopped.
#
-send_gdb "break 46\n"
-gdb_expect {
+gdb_test_multiple "break 46" "break at 46" {
-re "Breakpoint 5 at $hex: file .*$srcfile, line 46.*$gdb_prompt$" {
pass "break at 46"
}
- -re ".*$gdb_prompt$" { fail "break at 46" }
- timeout { fail "break at 46 (timeout)" }
}
-send_gdb "ignore 5 4\n"
-gdb_expect {
+gdb_test_multiple "ignore 5 4" "ignore 5 4" {
-re "Will ignore next 4 crossings of breakpoint 5.*$gdb_prompt$" {
pass "ignore 5 4"
}
- -re ".*$gdb_prompt$" { fail "ignore 5 4" }
- timeout { fail "ignore 5 4 (timeout)" }
}
-send_gdb "continue\n"
-gdb_expect {
+gdb_test_multiple "continue" "annotate ignore count change" {
-re ".*$srcfile:46:.*\032\032stopped\r\n\r\n\032\032breakpoints-invalid\r\n$gdb_prompt$" {
pass "annotate ignore count change"
}
- -re ".*$gdb_prompt$" { fail "annotate ignore count change" }
- timeout { fail "annotate ignore count change (timeout)" }
}
# check that ignore command is working, or the above can provide
# misleading assurance ...
-send_gdb "next\n"
-gdb_expect {
- -re "$gdb_prompt$" {}
- timeout { fail "next to exit loop" }
+gdb_test_multiple "next" "next to exit loop" {
+ -re "source .*annota1.c.*$gdb_prompt$" {
+ }
}
-send_gdb "next\n"
-gdb_expect {
+gdb_test_multiple "next" "breakpoint ignore count" {
-re ".*$srcfile:49:.*$gdb_prompt$" {
pass "breakpoint ignore count"
}
- -re ".*$gdb_prompt$" { fail "breakpoint ignore count" }
- timeout { fail "breakpoint ignore count (timeout)" }
}
#
unsupported "signal sent"
} else {
setup_xfail hppa*-*-hpux11*
- send_gdb "signal SIGTRAP\n"
- gdb_expect {
- -re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032signalled\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
- { pass "signal sent" }
- -re ".*$gdb_prompt$" { fail "signal sent" }
- timeout { fail "signal sent (timeout)" }
+ gdb_test_multiple "signal SIGTRAP" "signal sent" {
+ -re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032signalled\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
+ pass "signal sent"
+ }
}
}
set gdb_prompt \
"\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n"
- send_gdb "set annotate 2\n"
- gdb_expect {
- -re "set annotate 2\r\n$gdb_prompt$" {}
+ gdb_test_multiple "set annotate 2" "" {
+ -re "set annotate 2\r\n$gdb_prompt$" {
+ }
}
- send_gdb "next 2\n"
- gdb_expect {
+ gdb_test_multiple "next 2" "new thread" {
-re ".*\032\032new-thread" {
- pass "new thread"
+ pass "new thread"
}
- timeout { fail "new thread (timeout)" }
}
}
}
proc thread_switch {} {
- send_gdb "thread 1\n"
- gdb_expect {
- -re ".*\032\032thread-changed" {
+ gdb_test_multiple "thread 1" "thread switch" {
+ -re ".*\032\032thread-changed" {
pass "thread switch"
- }
- timeout { fail "thread switch (timeout)" }
}
+ }
}
thread_test
projects / binutils.git / blobdiff