FILE *stream;
PTR application_data;
- /* For use by the disassembler. */
- int flags;
+ /* Target description. We could replace this with a pointer to the bfd,
+ but that would require one. There currently isn't any such requirement
+ so to avoid introducing one we record these explicitly. */
+ /* The bfd_flavour. This can be bfd_target_unknown_flavour. */
+ enum bfd_flavour flavour;
+ /* The bfd_arch value. */
+ enum bfd_architecture arch;
+ /* The bfd_mach value. */
+ unsigned long mach;
+ /* Endianness (for bi-endian cpus). Mono-endian cpus can ignore this. */
+ enum bfd_endian endian;
+
+ /* For use by the disassembler.
+ The top 16 bits are reserved for public use (and are documented here).
+ The bottom 16 bits are for the internal use of the disassembler. */
+ unsigned long flags;
PTR private_data;
/* Function used to get bytes to disassemble. MEMADDR is the
extern int print_insn_z8002 PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_h8300 PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_h8300h PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_h8300s PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_h8500 PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_alpha PARAMS ((bfd_vma, disassemble_info*));
/* start-sanitize-arc */
-extern int print_insn_arc PARAMS ((bfd_vma, disassemble_info*));
+extern disassembler_ftype arc_get_disassembler PARAMS ((int, int));
/* end-sanitize-arc */
-extern int print_insn_arm PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_big_arm PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_little_arm PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_sparc PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_big_a29k PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_little_a29k PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_sh PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_shl PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_hppa PARAMS ((bfd_vma, disassemble_info*));
+/* start-sanitize-m32r */
+extern int print_insn_m32r PARAMS ((bfd_vma, disassemble_info*));
+/* end-sanitize-m32r */
extern int print_insn_m88k PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_mn10200 PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_mn10300 PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_ns32k PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_big_powerpc PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_little_powerpc PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_rs6000 PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_w65 PARAMS ((bfd_vma, disassemble_info*));
+/* start-sanitize-d10v */
+extern int print_insn_d10v PARAMS ((bfd_vma, disassemble_info*));
+/* end-sanitize-d10v */
+/* start-sanitize-v850 */
+extern int print_insn_v850 PARAMS ((bfd_vma, disassemble_info*));
+/* end-sanitize-v850 */
/* Fetch the disassembler for a given BFD, if that support is available. */
extern disassembler_ftype disassembler PARAMS ((bfd *));
extern void perror_memory PARAMS ((int, bfd_vma, struct disassemble_info *));
-/* Just print the address is hex. This is included for completeness even
+/* Just print the address in hex. This is included for completeness even
though both GDB and objdump provide their own (to print symbolic
addresses). */
extern void generic_print_address
PARAMS ((bfd_vma, struct disassemble_info *));
-#define INIT_DISASSEMBLE_INFO(INFO, STREAM) \
- (INFO).fprintf_func = (fprintf_ftype)fprintf, \
+/* Macro to initialize a disassemble_info struct. This should be called
+ by all applications creating such a struct. */
+#define INIT_DISASSEMBLE_INFO(INFO, STREAM, FPRINTF_FUNC) \
+ (INFO).flavour = bfd_target_unknown_flavour, \
+ (INFO).arch = bfd_arch_unknown, \
+ (INFO).mach = 0, \
+ (INFO).endian = BFD_ENDIAN_UNKNOWN, \
+ INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC)
+
+/* Call this macro to initialize only the internal variables for the
+ disassembler. Architecture dependent things such as byte order, or machine
+ variant are not touched by this macro. This makes things much easier for
+ GDB which must initialize these things seperatly. */
+
+#define INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) \
+ (INFO).fprintf_func = (FPRINTF_FUNC), \
(INFO).stream = (STREAM), \
(INFO).buffer = NULL, \
(INFO).buffer_vma = 0, \
(INFO).read_memory_func = buffer_read_memory, \
(INFO).memory_error_func = perror_memory, \
(INFO).print_address_func = generic_print_address, \
- (INFO).insn_info_valid = 0
-
-
-
-\f
-/* This block of definitions is for calling the instruction decoders
- from GDB. */
-
-/* GDB--Like target_read_memory, but slightly different parameters. */
-extern int
-dis_asm_read_memory PARAMS ((bfd_vma memaddr, bfd_byte *myaddr, int len,
- disassemble_info *info));
-
-/* GDB--Like memory_error with slightly different parameters. */
-extern void
-dis_asm_memory_error
- PARAMS ((int status, bfd_vma memaddr, disassemble_info *info));
-
-/* GDB--Like print_address with slightly different parameters. */
-extern void
-dis_asm_print_address PARAMS ((bfd_vma addr, disassemble_info *info));
-
-#define GDB_INIT_DISASSEMBLE_INFO(INFO, STREAM) \
- (INFO).fprintf_func = (fprintf_ftype)fprintf_filtered, \
- (INFO).stream = (STREAM), \
- (INFO).read_memory_func = dis_asm_read_memory, \
- (INFO).memory_error_func = dis_asm_memory_error, \
- (INFO).print_address_func = dis_asm_print_address, \
+ (INFO).flags = 0, \
(INFO).insn_info_valid = 0
#endif /* ! defined (DIS_ASM_H) */
projects / binutils.git / blobdiff