/* read.c - read a source file -
- Copyright (C) 1986, 1987, 1990, 1991 Free Software Foundation, Inc.
+ Copyright (C) 1986, 1987, 1990, 1991, 1993 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
#define MASK_CHAR ((int)(unsigned char)-1)
#endif
-#define MAXIMUM_NUMBER_OF_CHARS_FOR_FLOAT (16)
-/* This is the largest known floating point */
-/* format (for now). It will grow when we */
-/* do 4361 style flonums. */
+/* This is the largest known floating point format (for now). It will
+ grow when we do 4361 style flonums. */
+
+#define MAXIMUM_NUMBER_OF_CHARS_FOR_FLOAT (16)
/* Routines that read assembler source text to build spagetti in memory.
Another group of these functions is in the expr.c module. */
+/* for isdigit() */
#include <ctype.h>
#include "as.h"
+#include "subsegs.h"
#include "obstack.h"
#include "listing.h"
+/* We need this, despite the apparent object format dependency, since
+ it defines stab types, which all object formats can use now. */
+
+#include "aout/stab_gnu.h"
+
+#ifndef TC_START_LABEL
+#define TC_START_LABEL(x,y) (x==':')
+#endif
+
/* The NOP_OPCODE is for the alignment fill value.
* fill it a nop instruction so that the disassembler does not choke
* on it
die horribly;
#endif
+#ifndef LEX_AT
+/* The m88k unfortunately uses @ as a label beginner. */
+#define LEX_AT 0
+#endif
+
/* used by is_... macros. our ctype[] */
const char lex_type[256] =
{
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* PQRSTUVWXYZ[\]^_ */
0, 0, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 0, /* _!"#$%&'()*+,-./ */
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, /* 0123456789:;<=>? */
- 0, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, /* @ABCDEFGHIJKLMNO */
+ LEX_AT, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, /* @ABCDEFGHIJKLMNO */
3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 0, 0, 0, 3, /* PQRSTUVWXYZ[\]^_ */
0, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, /* `abcdefghijklmno */
3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 0, 0, 0, 0, /* pqrstuvwxyz{|}~. */
_, _, _, _, _, _, _, _, _, _, 99, _, _, _, _, _, /* @abcdefghijklmno */
#endif
_, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, /* */
+#ifdef TC_HPPA
+ _,99, _, _, _, _, _, _, _, _, _, _, _, _, _, _, /* _!"#$%&'()*+,-./ */
+ _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, /* 0123456789:;<=>? */
+#else
_, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, /* */
_, _, _, _, _, _, _, _, _, _, _, 99, _, _, _, _, /* 0123456789:;<=>? */
+#endif
_, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, /* */
_, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, /* */
_, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, /* */
/* May point to (bignum_start-1). */
/* Never >= bignum_limit. */
-static char *old_buffer = 0; /* JF a hack */
+int target_big_endian;
+
+static char *old_buffer; /* JF a hack */
static char *old_input;
static char *old_limit;
#ifndef WORKING_DOT_WORD
struct broken_word *broken_words;
-int new_broken_words = 0;
+int new_broken_words;
#endif
static char *demand_copy_string PARAMS ((int *lenP));
int is_it_end_of_statement PARAMS ((void));
-unsigned int next_char_of_string PARAMS ((void));
+static segT get_segmented_expression PARAMS ((expressionS *expP));
static segT get_known_segmented_expression PARAMS ((expressionS * expP));
static void grow_bignum PARAMS ((void));
static void pobegin PARAMS ((void));
-void stringer PARAMS ((int append_zero));
extern int listing;
\f
pobegin ();
obj_read_begin_hook ();
- obstack_begin (¬es, 5000);
- obstack_begin (&cond_obstack, 960);
+ /* Something close -- but not too close -- to a multiple of 1024.
+ The debugging malloc I'm using has 24 bytes of overhead. */
+ obstack_begin (¬es, 5090);
+ obstack_begin (&cond_obstack, 990);
#define BIGNUM_BEGIN_SIZE (16)
bignum_low = xmalloc ((long) BIGNUM_BEGIN_SIZE);
/* Use machine dependent syntax */
for (p = line_separator_chars; *p; p++)
- is_end_of_line[*p] = 1;
+ is_end_of_line[(unsigned char) *p] = 1;
/* Use more. FIXME-SOMEDAY. */
}
\f
{"byte", cons, 1},
{"comm", s_comm, 0},
{"data", s_data, 0},
+#ifdef S_SET_DESC
+ {"desc", s_desc, 0},
+#endif
/* dim */
{"double", float_cons, 'd'},
/* dsect */
/* err */
/* extend */
{"extern", s_ignore, 0}, /* We treat all undef as ext */
- {"app-file", s_app_file, 0},
+ {"appfile", s_app_file, 1},
+ {"appline", s_app_line, 0},
{"file", s_app_file, 0},
{"fill", s_fill, 0},
{"float", float_cons, 'f'},
-#ifdef DONTDEF
- {"gdbbeg", s_gdbbeg, 0},
- {"gdbblock", s_gdbblock, 0},
- {"gdbend", s_gdbend, 0},
- {"gdbsym", s_gdbsym, 0},
- {"gdbline", s_gdbline, 0},
- {"gdblinetab", s_gdblinetab, 0},
-#endif
{"global", s_globl, 0},
{"globl", s_globl, 0},
{"hword", cons, 2},
{"single", float_cons, 'f'},
/* size */
{"space", s_space, 0},
+ {"stabd", s_stab, 'd'},
+ {"stabn", s_stab, 'n'},
+ {"stabs", s_stab, 's'},
+ {"string", stringer, 1},
/* tag */
{"text", s_text, 0},
{"title", listing_title, 0}, /* Listing title */
/* type */
/* use */
/* val */
+ {"xstabs", s_xstab, 's'},
{"word", cons, 2},
{NULL} /* end sentinel */
};
static void
pobegin ()
{
- char *errtxt; /* error text */
+ const char *errtxt; /* error text */
const pseudo_typeS *pop;
po_hash = hash_new ();
return;
} /* pobegin() */
\f
-#define HANDLE_CONDITIONAL_ASSEMBLY() \
- if (ignore_input ()) \
- { \
- while (! is_end_of_line[*input_line_pointer++]) \
- if (input_line_pointer == buffer_limit) \
- break; \
- continue; \
+#define HANDLE_CONDITIONAL_ASSEMBLY() \
+ if (ignore_input ()) \
+ { \
+ while (! is_end_of_line[(unsigned char) *input_line_pointer++]) \
+ if (input_line_pointer == buffer_limit) \
+ break; \
+ continue; \
}
register char c;
register char *s; /* string of symbol, '\0' appended */
register int temp;
- /* register struct frag * fragP; JF unused *//* a frag we just made */
pseudo_typeS *pop;
buffer = input_scrub_new_file (name);
while ((buffer_limit = input_scrub_next_buffer (&input_line_pointer)) != 0)
{ /* We have another line to parse. */
know (buffer_limit[-1] == '\n'); /* Must have a sentinel. */
- contin: /* JF this goto is my fault I admit it. Someone brave please re-write
- the whole input section here? Pleeze??? */
+ contin: /* JF this goto is my fault I admit it.
+ Someone brave please re-write the whole
+ input section here? Pleeze??? */
while (input_line_pointer < buffer_limit)
- { /* We have more of this buffer to parse. */
+ {
+ /* We have more of this buffer to parse. */
/*
* We now have input_line_pointer->1st char of next line.
}
#endif
- } /* just passed a newline */
-
-
-
+ }
/*
* (And communicating via (linear) files is silly!
* If you must pass stuff, please pass a tree!)
*/
- if ((c = *input_line_pointer++) == '\t' || c == ' ' || c == '\f' || c == 0)
+ if ((c = *input_line_pointer++) == '\t'
+ || c == ' '
+ || c == '\f'
+ || c == 0)
{
c = *input_line_pointer++;
}
* [In case of pseudo-op, s->'.'.]
* Input_line_pointer->'\0' where c was.
*/
- if (c == ':')
+ if (TC_START_LABEL(c, input_line_pointer))
{
colon (s); /* user-defined label */
*input_line_pointer++ = ':'; /* Put ':' back for error messages' sake. */
}
- else if (c == '=' || input_line_pointer[1] == '=')
- { /* JF deal with FOO=BAR */
+ else if (c == '='
+ || (input_line_pointer[1] == '='
+#ifdef TC_EQUAL_IN_INSN
+ && ! TC_EQUAL_IN_INSN (c, input_line_pointer)
+#endif
+ ))
+ {
equals (s);
demand_empty_rest_of_line ();
}
if (!done_pseudo (s))
#else
- if (*s == '.')
+
+ pop = NULL;
+
+#ifdef NO_PSEUDO_DOT
+ /* The m88k uses pseudo-ops without a period. */
+ pop = (pseudo_typeS *) hash_find (po_hash, s);
+ if (pop != NULL && pop->poc_handler == NULL)
+ pop = NULL;
+#endif
+
+ if (pop != NULL || *s == '.')
{
/*
- * PSEUDO - OP.
- *
- * WARNING: c has next char, which may be end-of-line.
- * We lookup the pseudo-op table with s+1 because we
- * already know that the pseudo-op begins with a '.'.
- */
+ * PSEUDO - OP.
+ *
+ * WARNING: c has next char, which may be end-of-line.
+ * We lookup the pseudo-op table with s+1 because we
+ * already know that the pseudo-op begins with a '.'.
+ */
- pop = (pseudo_typeS *) hash_find (po_hash, s + 1);
+ if (pop == NULL)
+ pop = (pseudo_typeS *) hash_find (po_hash, s + 1);
/* Print the error msg now, while we still can */
- if (!pop)
+ if (pop == NULL)
{
as_bad ("Unknown pseudo-op: `%s'", s);
*input_line_pointer = c;
/* Put it back for error messages etc. */
*input_line_pointer = c;
- /* The following skip of whitespace is compulsory. */
- /* A well shaped space is sometimes all that separates keyword from operands. */
+ /* The following skip of whitespace is compulsory.
+ A well shaped space is sometimes all that separates
+ keyword from operands. */
if (c == ' ' || c == '\t')
{
input_line_pointer++;
} /* Skip seperator after keyword. */
/*
- * Input_line is restored.
- * Input_line_pointer->1st non-blank char
- * after pseudo-operation.
- */
+ * Input_line is restored.
+ * Input_line_pointer->1st non-blank char
+ * after pseudo-operation.
+ */
if (!pop)
{
ignore_rest_of_line ();
/* WARNING: c has char, which may be end-of-line. */
/* Also: input_line_pointer->`\0` where c was. */
*input_line_pointer = c;
- while (!is_end_of_line[*input_line_pointer])
+ while (!is_end_of_line[(unsigned char) *input_line_pointer]
+#ifdef TC_EOL_IN_INSN
+ || TC_EOL_IN_INSN (input_line_pointer)
+#endif
+ )
{
input_line_pointer++;
}
} /* if (is_name_beginner(c) */
- if (is_end_of_line[c])
+ if (is_end_of_line[(unsigned char) c])
{
continue;
} /* empty statement */
char *ends;
char *new_buf;
char *new_tmp;
- int new_length;
+ unsigned int new_length;
char *tmp_buf = 0;
extern char *scrub_string, *scrub_last_string;
if (!ends)
{
- int tmp_len;
- int num;
+ unsigned int tmp_len;
+ unsigned int num;
/* The end of the #APP wasn't in this buffer. We
keep reading in buffers until we find the #NO_APP
guarentee it. . . */
tmp_len = buffer_limit - s;
tmp_buf = xmalloc (tmp_len + 1);
- bcopy (s, tmp_buf, tmp_len);
+ memcpy (tmp_buf, s, tmp_len);
do
{
new_tmp = input_scrub_next_buffer (&buffer);
num = buffer_limit - buffer;
tmp_buf = xrealloc (tmp_buf, tmp_len + num);
- bcopy (buffer, tmp_buf + tmp_len, num);
+ memcpy (tmp_buf, buffer + tmp_len, num);
tmp_len += num;
}
while (!ends);
} /* read_a_source_file() */
void
-s_abort ()
+s_abort (ignore)
+ int ignore;
{
as_fatal (".abort detected. Abandoning ship.");
} /* s_abort() */
unsigned int i = 0;
unsigned long max_alignment = 1 << 15;
- if (is_end_of_line[*input_line_pointer])
+ if (is_end_of_line[(unsigned char) *input_line_pointer])
temp = arg; /* Default value from pseudo-op table */
else
temp = get_absolute_expression ();
input_line_pointer++;
temp_fill = get_absolute_expression ();
}
- else if (now_seg != SEG_DATA && now_seg != SEG_BSS)
+ else if (now_seg != data_section && now_seg != bss_section)
temp_fill = NOP_OPCODE;
else
temp_fill = 0;
/* Only make a frag if we HAVE to. . . */
if (temp && !need_pass_2)
- frag_align (temp, (int) temp_fill);
+ frag_align ((int) temp, (int) temp_fill);
+
+ record_alignment (now_seg, (int) temp);
demand_empty_rest_of_line ();
} /* s_align_bytes() */
/* For machines where ".align 4" means align to 2**4 boundary. */
void
-s_align_ptwo ()
+s_align_ptwo (ignore)
+ int ignore;
{
register int temp;
register long temp_fill;
input_line_pointer++;
temp_fill = get_absolute_expression ();
}
- else if (now_seg != SEG_DATA && now_seg != SEG_BSS)
+ /* @@ Fix this right for BFD! */
+ else if (now_seg != data_section && now_seg != bss_section)
temp_fill = NOP_OPCODE;
else
temp_fill = 0;
} /* s_align_ptwo() */
void
-s_comm ()
+s_comm (ignore)
+ int ignore;
{
register char *name;
register char c;
register char *p;
- register int temp;
+ offsetT temp;
register symbolS *symbolP;
name = input_line_pointer;
input_line_pointer++; /* skip ',' */
if ((temp = get_absolute_expression ()) < 0)
{
- as_warn (".COMMon length (%d.) <0! Ignored.", temp);
+ as_warn (".COMMon length (%ld.) <0! Ignored.", (long) temp);
ignore_rest_of_line ();
return;
}
}
if (S_GET_VALUE (symbolP))
{
- if (S_GET_VALUE (symbolP) != temp)
- as_bad ("Length of .comm \"%s\" is already %d. Not changed to %d.",
+ if (S_GET_VALUE (symbolP) != (valueT) temp)
+ as_bad ("Length of .comm \"%s\" is already %ld. Not changed to %ld.",
S_GET_NAME (symbolP),
- S_GET_VALUE (symbolP),
- temp);
+ (long) S_GET_VALUE (symbolP),
+ (long) temp);
}
else
{
- S_SET_VALUE (symbolP, temp);
+ S_SET_VALUE (symbolP, (valueT) temp);
S_SET_EXTERNAL (symbolP);
}
-#ifdef VMS
- if (!temp)
- symbolP->sy_other = const_flag;
-#endif
+#ifdef OBJ_VMS
+ if ( (!temp) || !flagseen['1'])
+ S_GET_OTHER(symbolP) = const_flag;
+#endif /* not OBJ_VMS */
know (symbolP->sy_frag == &zero_address_frag);
demand_empty_rest_of_line ();
} /* s_comm() */
void
-s_data ()
+s_data (ignore)
+ int ignore;
{
+ segT section;
register int temp;
temp = get_absolute_expression ();
-#ifdef BFD_ASSEMBLER
- subseg_set (data_section, (subsegT) temp);
-#else
- subseg_change (data_section, (subsegT) temp);
-#endif
+ if (flagseen['R'])
+ {
+ section = text_section;
+ temp += 1000;
+ }
+ else
+ section = data_section;
+
+ subseg_set (section, (subsegT) temp);
-#ifdef VMS
+#ifdef OBJ_VMS
const_flag = 0;
#endif
demand_empty_rest_of_line ();
}
+/* Handle the .appfile pseudo-op. This is automatically generated by
+ do_scrub_next_char when a preprocessor # line comment is seen with
+ a file name. This default definition may be overridden by the
+ object or CPU specific pseudo-ops. This function is also the
+ default definition for .file; the APPFILE argument is 1 for
+ .appfile, 0 for .file. */
+
void
-s_app_file ()
+s_app_file (appfile)
+ int appfile;
{
register char *s;
int length;
/* Some assemblers tolerate immediately following '"' */
if ((s = demand_copy_string (&length)) != 0)
{
- new_logical_line (s, -1);
+ /* If this is a fake .appfile, a fake newline was inserted into
+ the buffer. Passing -2 to new_logical_line tells it to
+ account for it. */
+ new_logical_line (s, appfile ? -2 : -1);
demand_empty_rest_of_line ();
+#ifdef LISTING
+ if (listing)
+ listing_source_file (s);
+#endif
}
#ifdef OBJ_COFF
c_dot_file_symbol (s);
#endif /* OBJ_COFF */
-} /* s_app_file() */
+#ifdef OBJ_ELF
+ elf_file_symbol (s);
+#endif
+}
+
+/* Handle the .appline pseudo-op. This is automatically generated by
+ do_scrub_next_char when a preprocessor # line comment is seen.
+ This default definition may be overridden by the object or CPU
+ specific pseudo-ops. */
+
+void
+s_app_line (ignore)
+ int ignore;
+{
+ int l;
+
+ /* The given number is that of the next line. */
+ l = get_absolute_expression () - 1;
+ new_logical_line ((char *) NULL, l);
+#ifdef LISTING
+ if (listing)
+ listing_source_line (l);
+#endif
+ demand_empty_rest_of_line ();
+}
void
-s_fill ()
+s_fill (ignore)
+ int ignore;
{
long temp_repeat = 0;
long temp_size = 1;
if (temp_size && !need_pass_2)
{
p = frag_var (rs_fill, (int) temp_size, (int) temp_size, (relax_substateT) 0, (symbolS *) 0, temp_repeat, (char *) 0);
- memset (p, 0, (int) temp_size);
+ memset (p, 0, (unsigned int) temp_size);
/* The magic number BSD_FILL_SIZE_CROCK_4 is from BSD 4.2 VAX
* flavoured AS. The following bizzare behaviour is to be
* compatible with above. I guess they tried to take up to 8
* bytes from a 4-byte expression and they forgot to sign
* extend. Un*x Sux. */
#define BSD_FILL_SIZE_CROCK_4 (4)
- md_number_to_chars (p, temp_fill,
+ md_number_to_chars (p, (valueT) temp_fill,
(temp_size > BSD_FILL_SIZE_CROCK_4
? BSD_FILL_SIZE_CROCK_4
: (int) temp_size));
}
void
-s_globl ()
+s_globl (ignore)
+ int ignore;
{
- register char *name;
- register int c;
- register symbolS *symbolP;
+ char *name;
+ int c;
+ symbolS *symbolP;
do
{
}
while (c == ',');
demand_empty_rest_of_line ();
-} /* s_globl() */
+}
void
s_lcomm (needs_align)
register char *p;
register int temp;
register symbolS *symbolP;
+ segT current_seg = now_seg;
+ subsegT current_subseg = now_subseg;
const int max_alignment = 15;
int align = 0;
+ segT bss_seg = bss_section;
name = input_line_pointer;
c = get_symbol_end ();
return;
}
+#ifdef TC_MIPS
+#ifdef OBJ_ECOFF
+ /* For MIPS ECOFF, small objects are put in .sbss. */
+ if (temp <= bfd_get_gp_size (stdoutput))
+ bss_seg = subseg_new (".sbss", 1);
+#endif
+#endif
+
if (needs_align)
{
align = 0;
align = 0;
as_warn ("Alignment negative. 0 assumed.");
}
- record_alignment (bss_section, align);
+ record_alignment (bss_seg, align);
} /* if needs align */
*p = 0;
S_GET_OTHER (symbolP) == 0 &&
S_GET_DESC (symbolP) == 0 &&
#endif /* OBJ_AOUT or OBJ_BOUT */
- (S_GET_SEGMENT (symbolP) == bss_section
+ (S_GET_SEGMENT (symbolP) == bss_seg
|| (!S_IS_DEFINED (symbolP) && S_GET_VALUE (symbolP) == 0)))
{
- char *p;
- segT current_seg = now_seg;
- subsegT current_subseg = now_subseg;
+ char *pfrag;
- subseg_new (bss_section, 1);
+ subseg_set (bss_seg, 1);
if (align)
frag_align (align, 0);
/* detach from old frag */
- if (S_GET_SEGMENT (symbolP) == bss_section)
+ if (S_GET_SEGMENT (symbolP) == bss_seg)
symbolP->sy_frag->fr_symbol = NULL;
symbolP->sy_frag = frag_now;
- p = frag_var (rs_org, 1, 1, (relax_substateT)0, symbolP,
- temp, (char *)0);
- *p = 0;
+ pfrag = frag_var (rs_org, 1, 1, (relax_substateT)0, symbolP,
+ temp, (char *)0);
+ *pfrag = 0;
- S_SET_SEGMENT (symbolP, bss_section);
+ S_SET_SEGMENT (symbolP, bss_seg);
#ifdef OBJ_COFF
/* The symbol may already have been created with a preceding
S_SET_STORAGE_CLASS (symbolP, C_STAT);
}
#endif /* OBJ_COFF */
- subseg_new (current_seg, current_subseg);
}
else
{
as_bad ("Ignoring attempt to re-define symbol %s.", name);
}
- demand_empty_rest_of_line ();
-
- return;
-} /* s_lcomm() */
-void
-s_long ()
-{
- cons (4);
-}
+ subseg_set (current_seg, current_subseg);
-void
-s_int ()
-{
- cons (4);
-}
+ demand_empty_rest_of_line ();
+} /* s_lcomm() */
void
-s_lsym ()
+s_lsym (ignore)
+ int ignore;
{
register char *name;
register char c;
register char *p;
- register segT segment;
expressionS exp;
register symbolS *symbolP;
return;
}
input_line_pointer++;
- segment = expression (&exp);
- if (segment != SEG_ABSOLUTE
-#ifdef MANY_SEGMENTS
- && !(segment >= SEG_E0 && segment <= SEG_UNKNOWN)
-#else
- && segment != SEG_DATA
- && segment != SEG_TEXT
- && segment != SEG_BSS
-#endif
- && segment != SEG_REGISTER)
+ expression (&exp);
+ if (exp.X_op != O_constant
+ && exp.X_op != O_register)
{
- as_bad ("Bad expression: %s", segment_name (segment));
+ as_bad ("bad expression");
ignore_rest_of_line ();
return;
}
introduced a bug. As recently as 1.37 didn't have this test
anyway. xoxorich. */
- if (S_GET_SEGMENT (symbolP) == SEG_UNKNOWN
+ if (S_GET_SEGMENT (symbolP) == undefined_section
&& S_GET_VALUE (symbolP) == 0)
{
/* The name might be an undefined .global symbol; be sure to
keep the "external" bit. */
- S_SET_SEGMENT (symbolP, segment);
- S_SET_VALUE (symbolP, (valueT) (exp.X_add_number));
+ S_SET_SEGMENT (symbolP,
+ (exp.X_op == O_constant
+ ? absolute_section
+ : reg_section));
+ S_SET_VALUE (symbolP, (valueT) exp.X_add_number);
}
else
{
} /* s_lsym() */
void
-s_org ()
+s_org (ignore)
+ int ignore;
{
register segT segment;
expressionS exp;
register long temp_fill;
register char *p;
- /*
- * Don't believe the documentation of BSD 4.2 AS.
- * There is no such thing as a sub-segment-relative origin.
- * Any absolute origin is given a warning, then assumed to be segment-relative.
- * Any segmented origin expression ("foo+42") had better be in the right
- * segment or the .org is ignored.
- *
- * BSD 4.2 AS warns if you try to .org backwards. We cannot because we
- * never know sub-segment sizes when we are reading code.
- * BSD will crash trying to emit -ve numbers of filler bytes in certain
- * .orgs. We don't crash, but see as-write for that code.
- */
- /*
- * Don't make frag if need_pass_2==1.
- */
+ /* Don't believe the documentation of BSD 4.2 AS. There is no such
+ thing as a sub-segment-relative origin. Any absolute origin is
+ given a warning, then assumed to be segment-relative. Any
+ segmented origin expression ("foo+42") had better be in the right
+ segment or the .org is ignored.
+
+ BSD 4.2 AS warns if you try to .org backwards. We cannot because
+ we never know sub-segment sizes when we are reading code. BSD
+ will crash trying to emit negative numbers of filler bytes in
+ certain .orgs. We don't crash, but see as-write for that code.
+
+ Don't make frag if need_pass_2==1. */
segment = get_known_segmented_expression (&exp);
if (*input_line_pointer == ',')
{
temp_fill = 0;
if (!need_pass_2)
{
- if (segment != now_seg && segment != SEG_ABSOLUTE)
+ if (segment != now_seg && segment != absolute_section)
as_bad ("Invalid segment \"%s\". Segment \"%s\" assumed.",
segment_name (segment), segment_name (now_seg));
p = frag_var (rs_org, 1, 1, (relax_substateT) 0, exp.X_add_symbol,
} /* s_org() */
void
-s_set ()
+s_set (ignore)
+ int ignore;
{
register char *name;
register char delim;
if (!need_pass_2)
{
- if (segment != now_seg && segment != SEG_ABSOLUTE)
+ if (segment != now_seg && segment != absolute_section)
as_bad ("Invalid segment \"%s\". Segment \"%s\" assumed.",
segment_name (segment),
segment_name (now_seg));
if ((symbolP = symbol_find (name)) == NULL
&& (symbolP = md_undefined_symbol (name)) == NULL)
{
- symbolP = symbol_new (name,
- SEG_UNKNOWN,
- 0,
- &zero_address_frag);
+ symbolP = symbol_new (name, undefined_section, 0, &zero_address_frag);
#ifdef OBJ_COFF
/* "set" symbols are local unless otherwise specified. */
SF_SET_LOCAL (symbolP);
}
if (mult)
{
- temp_fill *= mult;
+ temp_repeat *= mult;
}
if (temp_repeat <= 0)
{
} /* s_space() */
void
-s_text ()
+s_text (ignore)
+ int ignore;
{
register int temp;
temp = get_absolute_expression ();
-#ifdef MANY_SEGMENTS
- subseg_new (SEG_E0, (subsegT) temp);
-#else
- subseg_new (SEG_TEXT, (subsegT) temp);
-#endif
+ subseg_set (text_section, (subsegT) temp);
demand_empty_rest_of_line ();
} /* s_text() */
\f
-/*(JF was static, but can't be if machine dependent pseudo-ops are to use it */
-
void
demand_empty_rest_of_line ()
{
SKIP_WHITESPACE ();
- if (is_end_of_line[*input_line_pointer])
+ if (is_end_of_line[(unsigned char) *input_line_pointer])
{
input_line_pointer++;
}
void
ignore_rest_of_line () /* For suspect lines: gives warning. */
{
- if (!is_end_of_line[*input_line_pointer])
+ if (!is_end_of_line[(unsigned char) *input_line_pointer])
{
if (isprint (*input_line_pointer))
as_bad ("Rest of line ignored. First ignored character is `%c'.",
as_bad ("Rest of line ignored. First ignored character valued 0x%x.",
*input_line_pointer);
while (input_line_pointer < buffer_limit
- && !is_end_of_line[*input_line_pointer])
+ && !is_end_of_line[(unsigned char) *input_line_pointer])
{
input_line_pointer++;
}
}
input_line_pointer++; /* Return pointing just after end-of-line. */
- know (is_end_of_line[input_line_pointer[-1]]);
+ know (is_end_of_line[(unsigned char) input_line_pointer[-1]]);
}
/*
* Out: Input_line_pointer->just after any whitespace after expression.
* Tried to set symbol to value of expression.
* Will change symbols type, value, and frag;
- * May set need_pass_2 == 1.
*/
void
pseudo_set (symbolP)
symbolS *symbolP;
{
expressionS exp;
- register segT segment;
#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
int ext;
#endif /* OBJ_AOUT or OBJ_BOUT */
know (symbolP); /* NULL pointer is logic error. */
#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
+ /* @@ Fix this right for BFD. */
ext = S_IS_EXTERNAL (symbolP);
#endif /* OBJ_AOUT or OBJ_BOUT */
- if ((segment = expression (&exp)) == SEG_ABSENT)
+ (void) expression (&exp);
+
+ if (exp.X_op == O_illegal)
+ as_bad ("illegal expression; zero assumed");
+ else if (exp.X_op == O_absent)
+ as_bad ("missing expression; zero assumed");
+ else if (exp.X_op == O_big)
+ as_bad ("%s number invalid; zero assumed",
+ exp.X_add_number > 0 ? "bignum" : "floating point");
+ else if (exp.X_op == O_subtract
+ && (S_GET_SEGMENT (exp.X_add_symbol)
+ == S_GET_SEGMENT (exp.X_op_symbol))
+ && SEG_NORMAL (S_GET_SEGMENT (exp.X_add_symbol))
+ && exp.X_add_symbol->sy_frag == exp.X_op_symbol->sy_frag)
{
- as_bad ("Missing expression: absolute 0 assumed");
- exp.X_seg = SEG_ABSOLUTE;
- exp.X_add_number = 0;
+ exp.X_op = O_constant;
+ exp.X_add_number = (S_GET_VALUE (exp.X_add_symbol)
+ - S_GET_VALUE (exp.X_op_symbol));
}
- switch (segment)
+ switch (exp.X_op)
{
- case SEG_REGISTER:
- S_SET_SEGMENT (symbolP, SEG_REGISTER);
- S_SET_VALUE (symbolP, exp.X_add_number);
- symbolP->sy_frag = &zero_address_frag;
- break;
-
- case SEG_BIG:
- as_bad ("%s number invalid. Absolute 0 assumed.",
- exp.X_add_number > 0 ? "Bignum" : "Floating-Point");
- S_SET_SEGMENT (symbolP, SEG_ABSOLUTE);
+ case O_illegal:
+ case O_absent:
+ case O_big:
+ exp.X_add_number = 0;
+ /* Fall through. */
+ case O_constant:
+ S_SET_SEGMENT (symbolP, absolute_section);
#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
- ext ? S_SET_EXTERNAL (symbolP) :
+ /* @@ Fix this right for BFD. */
+ if (ext)
+ S_SET_EXTERNAL (symbolP);
+ else
S_CLEAR_EXTERNAL (symbolP);
#endif /* OBJ_AOUT or OBJ_BOUT */
- S_SET_VALUE (symbolP, 0);
+ S_SET_VALUE (symbolP, (valueT) exp.X_add_number);
symbolP->sy_frag = &zero_address_frag;
break;
- case SEG_ABSENT:
- as_warn ("No expression: Using absolute 0");
- S_SET_SEGMENT (symbolP, SEG_ABSOLUTE);
-#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
- ext ? S_SET_EXTERNAL (symbolP) :
- S_CLEAR_EXTERNAL (symbolP);
-#endif /* OBJ_AOUT or OBJ_BOUT */
- S_SET_VALUE (symbolP, 0);
+ case O_register:
+ S_SET_SEGMENT (symbolP, reg_section);
+ S_SET_VALUE (symbolP, (valueT) exp.X_add_number);
symbolP->sy_frag = &zero_address_frag;
break;
- case SEG_DIFFERENCE:
- if (exp.X_add_symbol && exp.X_subtract_symbol
- && (S_GET_SEGMENT (exp.X_add_symbol) ==
- S_GET_SEGMENT (exp.X_subtract_symbol)))
- {
- if (exp.X_add_symbol->sy_frag != exp.X_subtract_symbol->sy_frag)
- {
- as_bad ("Unknown expression: symbols %s and %s are in different frags.",
- S_GET_NAME (exp.X_add_symbol), S_GET_NAME (exp.X_subtract_symbol));
- need_pass_2++;
- }
- exp.X_add_number += S_GET_VALUE (exp.X_add_symbol) -
- S_GET_VALUE (exp.X_subtract_symbol);
- }
+ case O_symbol:
+ if (S_GET_SEGMENT (exp.X_add_symbol) == undefined_section)
+ symbolP->sy_value = exp;
else
- as_bad ("Complex expression. Absolute segment assumed.");
- case SEG_ABSOLUTE:
- S_SET_SEGMENT (symbolP, SEG_ABSOLUTE);
-#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
- ext ? S_SET_EXTERNAL (symbolP) :
- S_CLEAR_EXTERNAL (symbolP);
-#endif /* OBJ_AOUT or OBJ_BOUT */
- S_SET_VALUE (symbolP, exp.X_add_number);
- symbolP->sy_frag = &zero_address_frag;
- break;
-
- default:
-#ifdef MANY_SEGMENTS
- S_SET_SEGMENT (symbolP, segment);
-#else
- switch (segment)
{
- case SEG_DATA:
- S_SET_SEGMENT (symbolP, SEG_DATA);
- break;
- case SEG_TEXT:
- S_SET_SEGMENT (symbolP, SEG_TEXT);
- break;
- case SEG_BSS:
- S_SET_SEGMENT (symbolP, SEG_BSS);
- break;
-
- default:
- as_fatal ("failed sanity check.");
- } /* switch on segment */
-#endif
+ S_SET_SEGMENT (symbolP, S_GET_SEGMENT (exp.X_add_symbol));
#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
- if (ext)
- {
- S_SET_EXTERNAL (symbolP);
- }
- else
- {
- S_CLEAR_EXTERNAL (symbolP);
- } /* if external */
+ /* @@ Fix this right for BFD! */
+ if (ext)
+ S_SET_EXTERNAL (symbolP);
+ else
+ S_CLEAR_EXTERNAL (symbolP);
#endif /* OBJ_AOUT or OBJ_BOUT */
-
- S_SET_VALUE (symbolP, exp.X_add_number + S_GET_VALUE (exp.X_add_symbol));
- symbolP->sy_frag = exp.X_add_symbol->sy_frag;
- break;
-
- case SEG_PASS1: /* Not an error. Just try another pass. */
- symbolP->sy_forward = exp.X_add_symbol;
- as_bad ("Unknown expression");
- know (need_pass_2 == 1);
+ S_SET_VALUE (symbolP,
+ exp.X_add_number + S_GET_VALUE (exp.X_add_symbol));
+ symbolP->sy_frag = exp.X_add_symbol->sy_frag;
+ }
break;
- case SEG_UNKNOWN:
- symbolP->sy_forward = exp.X_add_symbol;
- /* as_warn("unknown symbol"); */
- /* need_pass_2 = 1; */
+ default:
+ /* The value is some complex expression.
+ FIXME: Should we set the segment to anything? */
+ symbolP->sy_value = exp;
break;
-
-
-
}
}
\f
* in the case of a long. Not worth the crocks required to fix it.
*/
+/* Select a parser for cons expressions. */
+
+/* Some targets need to parse the expression in various fancy ways.
+ You can define TC_PARSE_CONS_EXPRESSION to do whatever you like
+ (for example, the HPPA does this). Otherwise, you can define
+ BITFIELD_CONS_EXPRESSIONS to permit bitfields to be specified, or
+ REPEAT_CONS_EXPRESSIONS to permit repeat counts. If none of these
+ are defined, which is the normal case, then only simple expressions
+ are permitted. */
+
+#ifndef TC_PARSE_CONS_EXPRESSION
+#ifdef BITFIELD_CONS_EXPRESSIONS
+#define TC_PARSE_CONS_EXPRESSION(EXP, NBYTES) parse_bitfield_cons (EXP, NBYTES)
+static void
+parse_bitfield_cons PARAMS ((expressionS *exp, unsigned int nbytes));
+#endif
+#ifdef MRI
+#define TC_PARSE_CONS_EXPRESSION(EXP, NBYTES) parse_mri_cons (EXP)
+static void
+parse_mri_cons PARAMS ((expressionS *exp));
+#endif
+#ifdef REPEAT_CONS_EXPRESSIONS
+#define TC_PARSE_CONS_EXPRESSION(EXP, NBYTES) parse_repeat_cons (EXP, NBYTES)
+static void
+parse_repeat_cons PARAMS ((expressionS *exp, unsigned int nbytes));
+#endif
+
+/* If we haven't gotten one yet, just call expression. */
+#ifndef TC_PARSE_CONS_EXPRESSION
+#define TC_PARSE_CONS_EXPRESSION(EXP, NBYTES) expression (EXP)
+#endif
+#endif
+
/* worker to do .byte etc statements */
/* clobbers input_line_pointer, checks */
/* end-of-line. */
void
cons (nbytes)
- register unsigned int nbytes; /* 1=.byte, 2=.word, 4=.long */
+ register int nbytes; /* 1=.byte, 2=.word, 4=.long */
{
- register char c;
- register long mask; /* High-order bits we will left-truncate, */
- /* but includes sign bit also. */
- register long get; /* what we get */
- register long use; /* get after truncation. */
- register long unmask; /* what bits we will store */
- register char *p;
- register segT segment;
expressionS exp;
- /*
- * Input_line_pointer->1st char after pseudo-op-code and could legally
- * be a end-of-line. (Or, less legally an eof - which we cope with.)
- */
- /* JF << of >= number of bits in the object is undefined. In particular
- SPARC (Sun 4) has problems */
-
- if (nbytes >= sizeof (long))
+ if (is_it_end_of_statement ())
{
- mask = 0;
+ demand_empty_rest_of_line ();
+ return;
}
- else
+
+ do
{
- mask = ~0 << (BITS_PER_CHAR * nbytes); /* Don't store these bits. */
- } /* bigger than a long */
+ TC_PARSE_CONS_EXPRESSION (&exp, (unsigned int) nbytes);
+ emit_expr (&exp, (unsigned int) nbytes);
+ }
+ while (*input_line_pointer++ == ',');
- unmask = ~mask; /* Do store these bits. */
+ input_line_pointer--; /* Put terminator back into stream. */
+ demand_empty_rest_of_line ();
+} /* cons() */
-#ifdef NEVER
- "Do this mod if you want every overflow check to assume SIGNED 2's complement data.";
- mask = ~(unmask >> 1); /* Includes sign bit now. */
-#endif
+/* Put the contents of expression EXP into the object file using
+ NBYTES bytes. If need_pass_2 is 1, this does nothing. */
- /*
- * The following awkward logic is to parse ZERO or more expressions,
- * comma seperated. Recall an expression includes its leading &
- * trailing blanks. We fake a leading ',' if there is (supposed to
- * be) a 1st expression, and keep demanding 1 expression for each ','.
- */
- if (is_it_end_of_statement ())
+void
+emit_expr (exp, nbytes)
+ expressionS *exp;
+ unsigned int nbytes;
+{
+ operatorT op;
+ register char *p;
+
+ /* Don't do anything if we are going to make another pass. */
+ if (need_pass_2)
+ return;
+
+ op = exp->X_op;
+
+ if (op == O_absent || op == O_illegal)
{
- c = 0; /* Skip loop. */
- input_line_pointer++; /* Matches end-of-loop 'correction'. */
+ as_warn ("zero assumed for missing expression");
+ exp->X_add_number = 0;
+ op = O_constant;
}
- else
+ else if (op == O_big)
{
- c = ',';
- } /* if the end else fake it */
-
- /* Do loop. */
- while (c == ',')
+ as_bad ("%s number invalid; zero assumed",
+ exp->X_add_number > 0 ? "bignum" : "floating point");
+ exp->X_add_number = 0;
+ op = O_constant;
+ }
+ else if (op == O_register)
{
-#ifdef WANT_BITFIELDS
- unsigned int bits_available = BITS_PER_CHAR * nbytes;
- /* used for error messages and rescanning */
- char *hold = input_line_pointer;
-#endif /* WANT_BITFIELDS */
-#ifdef MRI
- if (*input_line_pointer == '\'')
- {
- /* An MRI style string, cut into as many bytes as will fit
- into a nbyte chunk, left justify if necessary, and sepatate
- with commas so we can try again later */
- int scan = 0;
- unsigned int result = 0;
- input_line_pointer++;
- for (scan = 0; scan < nbytes; scan++)
- {
- if (*input_line_pointer == '\'')
- {
- if (input_line_pointer[1] == '\'')
- {
- input_line_pointer++;
- }
- else
- break;
- }
- result = (result << 8) | (*input_line_pointer++);
- }
+ as_warn ("register value used as expression");
+ op = O_constant;
+ }
- /* Left justify */
- while (scan < nbytes)
- {
- result <<= 8;
- scan++;
- }
- /* Create correct expression */
- exp.X_add_symbol = 0;
- exp.X_add_number = result;
- exp.X_seg = segment = SEG_ABSOLUTE;
- /* Fake it so that we can read the next char too */
- if (input_line_pointer[0] != '\'' ||
- (input_line_pointer[0] == '\'' && input_line_pointer[1] == '\''))
- {
- input_line_pointer -= 2;
- input_line_pointer[0] = ',';
- input_line_pointer[1] = '\'';
- }
- else
- input_line_pointer++;
+ p = frag_more ((int) nbytes);
- }
- else
+#ifndef WORKING_DOT_WORD
+ /* If we have the difference of two symbols in a word, save it on
+ the broken_words list. See the code in write.c. */
+ if (op == O_subtract && nbytes == 2)
+ {
+ struct broken_word *x;
+
+ x = (struct broken_word *) xmalloc (sizeof (struct broken_word));
+ x->next_broken_word = broken_words;
+ broken_words = x;
+ x->frag = frag_now;
+ x->word_goes_here = p;
+ x->dispfrag = 0;
+ x->add = exp->X_add_symbol;
+ x->sub = exp->X_op_symbol;
+ x->addnum = exp->X_add_number;
+ x->added = 0;
+ new_broken_words++;
+ return;
+ }
#endif
- /* At least scan over the expression. */
- segment = expression (&exp);
-
-#ifdef WANT_BITFIELDS
- /* Some other assemblers, (eg, asm960), allow
- bitfields after ".byte" as w:x,y:z, where w and
- y are bitwidths and x and y are values. They
- then pack them all together. We do a little
- better in that we allow them in words, longs,
- etc. and we'll pack them in target byte order
- for you.
-
- The rules are: pack least significat bit first,
- if a field doesn't entirely fit, put it in the
- next unit. Overflowing the bitfield is
- explicitly *not* even a warning. The bitwidth
- should be considered a "mask".
-
- FIXME-SOMEDAY: If this is considered generally
- useful, this logic should probably be reworked.
- xoxorich. */
-
- if (*input_line_pointer == ':')
- { /* bitfields */
- long value = 0;
-
- for (;;)
- {
- unsigned long width;
- if (*input_line_pointer != ':')
- {
- input_line_pointer = hold;
- break;
- } /* next piece is not a bitfield */
-
- /* In the general case, we can't allow
- full expressions with symbol
- differences and such. The relocation
- entries for symbols not defined in this
- assembly would require arbitrary field
- widths, positions, and masks which most
- of our current object formats don't
- support.
-
- In the specific case where a symbol
- *is* defined in this assembly, we
- *could* build fixups and track it, but
- this could lead to confusion for the
- backends. I'm lazy. I'll take any
- SEG_ABSOLUTE. I think that means that
- you can use a previous .set or
- .equ type symbol. xoxorich. */
-
- if (segment == SEG_ABSENT)
- {
- as_warn ("Using a bit field width of zero.");
- exp.X_add_number = 0;
- segment = SEG_ABSOLUTE;
- } /* implied zero width bitfield */
+ if (op == O_constant)
+ {
+ register long get;
+ register long use;
+ register long mask;
+ register long unmask;
- if (segment != SEG_ABSOLUTE)
- {
- *input_line_pointer = '\0';
- as_bad ("Field width \"%s\" too complex for a bitfield.\n", hold);
- *input_line_pointer = ':';
- demand_empty_rest_of_line ();
- return;
- } /* too complex */
+ /* JF << of >= number of bits in the object is undefined. In
+ particular SPARC (Sun 4) has problems */
+ if (nbytes >= sizeof (long))
+ mask = 0;
+ else
+ mask = ~0 << (BITS_PER_CHAR * nbytes); /* Don't store these bits. */
- if ((width = exp.X_add_number) > (BITS_PER_CHAR * nbytes))
- {
- as_warn ("Field width %d too big to fit in %d bytes: truncated to %d bits.",
- width, nbytes, (BITS_PER_CHAR * nbytes));
- width = BITS_PER_CHAR * nbytes;
- } /* too big */
+ unmask = ~mask; /* Do store these bits. */
- if (width > bits_available)
- {
- /* FIXME-SOMEDAY: backing up and
- reparsing is wasteful */
- input_line_pointer = hold;
- exp.X_add_number = value;
- break;
- } /* won't fit */
+#ifdef NEVER
+ "Do this mod if you want every overflow check to assume SIGNED 2's complement data.";
+ mask = ~(unmask >> 1); /* Includes sign bit now. */
+#endif
- hold = ++input_line_pointer; /* skip ':' */
+ get = exp->X_add_number;
+ use = get & unmask;
+ if ((get & mask) != 0 && (get & mask) != mask)
+ { /* Leading bits contain both 0s & 1s. */
+ as_warn ("Value 0x%lx truncated to 0x%lx.", get, use);
+ }
+ /* put bytes in right order. */
+ md_number_to_chars (p, (valueT) use, (int) nbytes);
+ }
+ else
+ {
+ md_number_to_chars (p, (valueT) 0, (int) nbytes);
- if ((segment = expression (&exp)) != SEG_ABSOLUTE)
- {
- char cache = *input_line_pointer;
+ /* Now we need to generate a fixS to record the symbol value.
+ This is easy for BFD. For other targets it can be more
+ complex. For very complex cases (currently, the HPPA and
+ NS32K), you can define TC_CONS_FIX_NEW to do whatever you
+ want. For simpler cases, you can define TC_CONS_RELOC to be
+ the name of the reloc code that should be stored in the fixS.
+ If neither is defined, the code uses NO_RELOC if it is
+ defined, and otherwise uses 0. */
- *input_line_pointer = '\0';
- as_bad ("Field value \"%s\" too complex for a bitfield.\n", hold);
- *input_line_pointer = cache;
- demand_empty_rest_of_line ();
- return;
- } /* too complex */
+#ifdef BFD_ASSEMBLER
+#ifdef TC_CONS_FIX_NEW
+ TC_CONS_FIX_NEW (frag_now, p - frag_now->fr_literal, nbytes, exp);
+#else
+ fix_new_exp (frag_now, p - frag_now->fr_literal, (int) nbytes, exp, 0,
+ /* @@ Should look at CPU word size. */
+ nbytes == 2 ? BFD_RELOC_16
+ : nbytes == 8 ? BFD_RELOC_64
+ : BFD_RELOC_32);
+#endif
+#else
+#ifdef TC_CONS_FIX_NEW
+ TC_CONS_FIX_NEW (frag_now, p - frag_now->fr_literal, nbytes, exp);
+#else
+ /* Figure out which reloc number to use. Use TC_CONS_RELOC if
+ it is defined, otherwise use NO_RELOC if it is defined,
+ otherwise use 0. */
+#ifndef TC_CONS_RELOC
+#ifdef NO_RELOC
+#define TC_CONS_RELOC NO_RELOC
+#else
+#define TC_CONS_RELOC 0
+#endif
+#endif
+ fix_new_exp (frag_now, p - frag_now->fr_literal, nbytes, exp, 0,
+ TC_CONS_RELOC);
+#endif /* TC_CONS_FIX_NEW */
+#endif /* BFD_ASSEMBLER */
+ }
+}
+\f
+#ifdef BITFIELD_CONS_EXPRESSIONS
- value |= (~(-1 << width) & exp.X_add_number)
- << ((BITS_PER_CHAR * nbytes) - bits_available);
+/* i960 assemblers, (eg, asm960), allow bitfields after ".byte" as
+ w:x,y:z, where w and y are bitwidths and x and y are values. They
+ then pack them all together. We do a little better in that we allow
+ them in words, longs, etc. and we'll pack them in target byte order
+ for you.
- if ((bits_available -= width) == 0
- || is_it_end_of_statement ()
- || *input_line_pointer != ',')
- {
- break;
- } /* all the bitfields we're gonna get */
+ The rules are: pack least significat bit first, if a field doesn't
+ entirely fit, put it in the next unit. Overflowing the bitfield is
+ explicitly *not* even a warning. The bitwidth should be considered
+ a "mask".
- hold = ++input_line_pointer;
- segment = expression (&exp);
- } /* forever loop */
+ To use this function the tc-XXX.h file should define
+ BITFIELD_CONS_EXPRESSIONS. */
- exp.X_add_number = value;
- segment = SEG_ABSOLUTE;
- } /* if looks like a bitfield */
-#endif /* WANT_BITFIELDS */
+static void
+parse_bitfield_cons (exp, nbytes)
+ expressionS *exp;
+ unsigned int nbytes;
+{
+ unsigned int bits_available = BITS_PER_CHAR * nbytes;
+ char *hold = input_line_pointer;
- if (!need_pass_2)
- { /* Still worthwhile making frags. */
+ (void) expression (exp);
+
+ if (*input_line_pointer == ':')
+ { /* bitfields */
+ long value = 0;
- /* Don't call this if we are going to junk this pass anyway! */
- know (segment != SEG_PASS1);
+ for (;;)
+ {
+ unsigned long width;
- if (segment == SEG_DIFFERENCE && exp.X_add_symbol == NULL)
+ if (*input_line_pointer != ':')
{
- as_bad ("Subtracting symbol \"%s\"(segment\"%s\") is too hard. Absolute segment assumed.",
- S_GET_NAME (exp.X_subtract_symbol),
- segment_name (S_GET_SEGMENT (exp.X_subtract_symbol)));
- segment = SEG_ABSOLUTE;
- /* Leave exp . X_add_number alone. */
- }
- p = frag_more (nbytes);
- switch (segment)
+ input_line_pointer = hold;
+ break;
+ } /* next piece is not a bitfield */
+
+ /* In the general case, we can't allow
+ full expressions with symbol
+ differences and such. The relocation
+ entries for symbols not defined in this
+ assembly would require arbitrary field
+ widths, positions, and masks which most
+ of our current object formats don't
+ support.
+
+ In the specific case where a symbol
+ *is* defined in this assembly, we
+ *could* build fixups and track it, but
+ this could lead to confusion for the
+ backends. I'm lazy. I'll take any
+ SEG_ABSOLUTE. I think that means that
+ you can use a previous .set or
+ .equ type symbol. xoxorich. */
+
+ if (exp->X_op == O_absent)
{
- case SEG_BIG:
- as_bad ("%s number invalid. Absolute 0 assumed.",
- exp.X_add_number > 0 ? "Bignum" : "Floating-Point");
- md_number_to_chars (p, (long) 0, nbytes);
+ as_warn ("using a bit field width of zero");
+ exp->X_add_number = 0;
+ exp->X_op = O_constant;
+ } /* implied zero width bitfield */
+
+ if (exp->X_op != O_constant)
+ {
+ *input_line_pointer = '\0';
+ as_bad ("field width \"%s\" too complex for a bitfield", hold);
+ *input_line_pointer = ':';
+ demand_empty_rest_of_line ();
+ return;
+ } /* too complex */
+
+ if ((width = exp->X_add_number) > (BITS_PER_CHAR * nbytes))
+ {
+ as_warn ("field width %d too big to fit in %d bytes: truncated to %d bits",
+ width, nbytes, (BITS_PER_CHAR * nbytes));
+ width = BITS_PER_CHAR * nbytes;
+ } /* too big */
+
+ if (width > bits_available)
+ {
+ /* FIXME-SOMEDAY: backing up and reparsing is wasteful. */
+ input_line_pointer = hold;
+ exp->X_add_number = value;
break;
+ } /* won't fit */
- case SEG_ABSENT:
- as_warn ("0 assumed for missing expression");
- exp.X_add_number = 0;
- know (exp.X_add_symbol == NULL);
- /* fall into SEG_ABSOLUTE */
- case SEG_ABSOLUTE:
- get = exp.X_add_number;
- use = get & unmask;
- if ((get & mask) && (get & mask) != mask)
- { /* Leading bits contain both 0s & 1s. */
- as_warn ("Value 0x%x truncated to 0x%x.", get, use);
- }
- md_number_to_chars (p, use, nbytes); /* put bytes in right order. */
+ hold = ++input_line_pointer; /* skip ':' */
+
+ (void) expression (exp);
+ if (exp->X_op != O_constant)
+ {
+ char cache = *input_line_pointer;
+
+ *input_line_pointer = '\0';
+ as_bad ("field value \"%s\" too complex for a bitfield", hold);
+ *input_line_pointer = cache;
+ demand_empty_rest_of_line ();
+ return;
+ } /* too complex */
+
+ value |= ((~(-1 << width) & exp->X_add_number)
+ << ((BITS_PER_CHAR * nbytes) - bits_available));
+
+ if ((bits_available -= width) == 0
+ || is_it_end_of_statement ()
+ || *input_line_pointer != ',')
+ {
break;
+ } /* all the bitfields we're gonna get */
- case SEG_DIFFERENCE:
-#ifndef WORKING_DOT_WORD
- if (nbytes == 2)
+ hold = ++input_line_pointer;
+ (void) expression (exp);
+ } /* forever loop */
+
+ exp->X_add_number = value;
+ exp->X_op = O_constant;
+ } /* if looks like a bitfield */
+} /* parse_bitfield_cons() */
+
+#endif /* BITFIELD_CONS_EXPRESSIONS */
+\f
+#ifdef MRI
+
+static void
+parse_mri_cons (exp, nbytes)
+ expressionS *exp;
+ unsigned int nbytes;
+{
+ if (*input_line_pointer == '\'')
+ {
+ /* An MRI style string, cut into as many bytes as will fit into
+ a nbyte chunk, left justify if necessary, and separate with
+ commas so we can try again later */
+ int scan = 0;
+ unsigned int result = 0;
+ input_line_pointer++;
+ for (scan = 0; scan < nbytes; scan++)
+ {
+ if (*input_line_pointer == '\'')
+ {
+ if (input_line_pointer[1] == '\'')
{
- struct broken_word *x;
-
- x = (struct broken_word *) xmalloc (sizeof (struct broken_word));
- x->next_broken_word = broken_words;
- broken_words = x;
- x->frag = frag_now;
- x->word_goes_here = p;
- x->dispfrag = 0;
- x->add = exp.X_add_symbol;
- x->sub = exp.X_subtract_symbol;
- x->addnum = exp.X_add_number;
- x->added = 0;
- new_broken_words++;
- break;
+ input_line_pointer++;
}
- /* Else Fall through into. . . */
-#endif
- default:
- case SEG_UNKNOWN:
-#ifdef TC_NS32K
- fix_new_ns32k (frag_now, p - frag_now->fr_literal, nbytes,
- exp.X_add_symbol, exp.X_subtract_symbol,
- exp.X_add_number, 0, 0, 2, 0, 0);
-#else
-# if defined(TC_SPARC) || defined(TC_A29K)
- fix_new (frag_now, p - frag_now->fr_literal, nbytes,
- exp.X_add_symbol, exp.X_subtract_symbol,
- exp.X_add_number, 0, RELOC_32);
-# else
-# if defined(TC_H8300)
- fix_new (frag_now, p - frag_now->fr_literal, nbytes,
- exp.X_add_symbol, exp.X_subtract_symbol,
- exp.X_add_number, 0, R_RELWORD);
-
-# else
-#ifdef NO_RELOC
- fix_new (frag_now, p - frag_now->fr_literal, nbytes,
- exp.X_add_symbol, exp.X_subtract_symbol,
- exp.X_add_number, 0, NO_RELOC);
-#else
- fix_new (frag_now, p - frag_now->fr_literal, nbytes,
- exp.X_add_symbol, exp.X_subtract_symbol,
- exp.X_add_number, 0, 0);
-#endif /* NO_RELOC */
-# endif /* tc_h8300 */
-# endif /* tc_sparc|tc_a29k */
-#endif /* TC_NS32K */
- break;
- } /* switch(segment) */
- } /* if (!need_pass_2) */
- c = *input_line_pointer++;
- } /* while(c==',') */
- input_line_pointer--; /* Put terminator back into stream. */
- demand_empty_rest_of_line ();
-} /* cons() */
+ else
+ break;
+ }
+ result = (result << 8) | (*input_line_pointer++);
+ }
+
+ /* Left justify */
+ while (scan < nbytes)
+ {
+ result <<= 8;
+ scan++;
+ }
+ /* Create correct expression */
+ exp->X_op = O_constant;
+ exp->X_add_number = result;
+ /* Fake it so that we can read the next char too */
+ if (input_line_pointer[0] != '\'' ||
+ (input_line_pointer[0] == '\'' && input_line_pointer[1] == '\''))
+ {
+ input_line_pointer -= 2;
+ input_line_pointer[0] = ',';
+ input_line_pointer[1] = '\'';
+ }
+ else
+ input_line_pointer++;
+ }
+ else
+ expression (&exp);
+}
+
+#endif /* MRI */
+\f
+#ifdef REPEAT_CONS_EXPRESSIONS
+
+/* Parse a repeat expression for cons. This is used by the MIPS
+ assembler. The format is NUMBER:COUNT; NUMBER appears in the
+ object file COUNT times.
+
+ To use this for a target, define REPEAT_CONS_EXPRESSIONS. */
+
+static void
+parse_repeat_cons (exp, nbytes)
+ expressionS *exp;
+ unsigned int nbytes;
+{
+ expressionS count;
+ register int i;
+
+ expression (exp);
+
+ if (*input_line_pointer != ':')
+ {
+ /* No repeat count. */
+ return;
+ }
+
+ ++input_line_pointer;
+ expression (&count);
+ if (count.X_op != O_constant
+ || count.X_add_number <= 0)
+ {
+ as_warn ("Unresolvable or nonpositive repeat count; using 1");
+ return;
+ }
+
+ /* The cons function is going to output this expression once. So we
+ output it count - 1 times. */
+ for (i = count.X_add_number - 1; i > 0; i--)
+ emit_expr (exp, nbytes);
+}
+
+#endif /* REPEAT_CONS_EXPRESSIONS */
\f
/*
* big_cons()
* It would be nicer to permit bignums in expressions and only
* complain if the result overflowed. However, due to "efficiency"...
*/
-/* worker to do .quad etc statements */
-/* clobbers input_line_pointer, checks */
-/* end-of-line. */
-/* 8=.quad 16=.octa ... */
+/* Worker to do .quad etc statements. Clobbers input_line_pointer, checks
+ end-of-line. 8=.quad 16=.octa ... */
void
big_cons (nbytes)
register int work; /* For multi-precision arithmetic. */
register char *p; /* For multi-precision arithmetic. */
- extern char hex_value[]; /* In hex_value.c. */
+ extern const char hex_value[]; /* In hex_value.c. */
/*
* The following awkward logic is to parse ZERO or more strings,
* mysterious zero constants: which is what they get when
* they completely omit digits.
*/
- if (hex_value[c] >= radix)
+ if (hex_value[(unsigned char) c] >= radix)
{
as_bad ("Missing digits. 0 assumed.");
}
bignum_high = bignum_low - 1; /* Start constant with 0 chars. */
- for (; (digit = hex_value[c]) < radix; c = *++input_line_pointer)
+ for (;
+ (digit = hex_value[(unsigned char) c]) < radix;
+ c = *++input_line_pointer)
{
/* Multiply existing number by radix, then add digit. */
carry = digit;
}
if (!need_pass_2)
{
+ char *src = bignum_low;
p = frag_more (nbytes);
- bcopy (bignum_low, p, (int) nbytes);
+ if (target_big_endian)
+ {
+ int i;
+ for (i = nbytes - 1; i >= 0; i--)
+ p[i] = *src++;
+ }
+ else
+ memcpy (p, bignum_low, (unsigned int) nbytes);
}
/* C contains character after number. */
SKIP_WHITESPACE ();
static void
grow_bignum ()
{
- register long length;
+ register unsigned long length;
bignum_high++;
if (bignum_high >= bignum_limit)
*
*/
-void /* JF was static, but can't be if VAX.C is goning to use it */
-float_cons (float_type) /* Worker to do .float etc statements. */
+void
+float_cons (float_type)
/* Clobbers input_line-pointer, checks end-of-line. */
register int float_type; /* 'f':.ffloat ... 'F':.float ... */
{
register char *p;
- register char c;
int length; /* Number of chars in an object. */
register char *err; /* Error from scanning floating literal. */
char temp[MAXIMUM_NUMBER_OF_CHARS_FOR_FLOAT];
- /*
- * The following awkward logic is to parse ZERO or more strings,
- * comma seperated. Recall an expression includes its leading &
- * trailing blanks. We fake a leading ',' if there is (supposed to
- * be) a 1st expression, and keep demanding 1 expression for each ','.
- */
if (is_it_end_of_statement ())
{
- c = 0; /* Skip loop. */
- ++input_line_pointer; /*->past termintor. */
- }
- else
- {
- c = ','; /* Do loop. */
+ demand_empty_rest_of_line ();
+ return;
}
- while (c == ',')
+
+ do
{
/* input_line_pointer->1st char of a flonum (we hope!). */
SKIP_WHITESPACE ();
+
/* Skip any 0{letter} that may be present. Don't even check if the
* letter is legal. Someone may invent a "z" format and this routine
* has no use for such information. Lusers beware: you get
* diagnostics if your input is ill-conditioned.
*/
-
if (input_line_pointer[0] == '0' && isalpha (input_line_pointer[1]))
input_line_pointer += 2;
err = md_atof (float_type, temp, &length);
know (length <= MAXIMUM_NUMBER_OF_CHARS_FOR_FLOAT);
know (length > 0);
- if (*err)
+ if (err && *err)
{
as_bad ("Bad floating literal: %s", err);
ignore_rest_of_line ();
- /* Input_line_pointer->just after end-of-line. */
- c = 0; /* Break out of loop. */
+ return;
}
- else
+
+ if (!need_pass_2)
{
- if (!need_pass_2)
+ int count;
+
+ count = 1;
+
+#ifdef REPEAT_CONS_EXPRESSIONS
+ if (*input_line_pointer == ':')
+ {
+ expressionS count_exp;
+
+ ++input_line_pointer;
+ expression (&count_exp);
+ if (count_exp.X_op != O_constant
+ || count_exp.X_add_number <= 0)
+ {
+ as_warn ("unresolvable or nonpositive repeat count; using 1");
+ }
+ else
+ count = count_exp.X_add_number;
+ }
+#endif
+
+ while (--count >= 0)
{
p = frag_more (length);
- bcopy (temp, p, length);
+ memcpy (p, temp, (unsigned int) length);
}
- SKIP_WHITESPACE ();
- c = *input_line_pointer++;
- /* C contains 1st non-white character after number. */
- /* input_line_pointer->just after terminator (c). */
}
+ SKIP_WHITESPACE ();
}
- --input_line_pointer; /*->terminator (is not ','). */
+ while (*input_line_pointer++ == ',');
+
+ --input_line_pointer; /* Put terminator back into stream. */
demand_empty_rest_of_line ();
} /* float_cons() */
\f
/* Checks end-of-line. */
register int append_zero; /* 0: don't append '\0', else 1 */
{
- /* register char * p; JF unused */
- /* register int length; JF unused *//* Length of string we read, excluding */
- /* trailing '\0' implied by closing quote. */
- /* register char * where; JF unused */
- /* register fragS * fragP; JF unused */
register unsigned int c;
/*
{
register segT retval;
- if ((retval = expression (expP)) == SEG_PASS1 || retval == SEG_ABSENT || retval == SEG_BIG)
+ retval = expression (expP);
+ if (expP->X_op == O_illegal
+ || expP->X_op == O_absent
+ || expP->X_op == O_big)
{
- as_bad ("Expected address expression: absolute 0 assumed");
- retval = expP->X_seg = SEG_ABSOLUTE;
+ as_bad ("expected address expression; zero assumed");
+ expP->X_op = O_constant;
expP->X_add_number = 0;
- expP->X_add_symbol = expP->X_subtract_symbol = 0;
+ retval = absolute_section;
}
- return (retval); /* SEG_ ABSOLUTE,UNKNOWN,DATA,TEXT,BSS */
+ return retval;
}
static segT
register expressionS *expP;
{
register segT retval;
- register char *name1;
- register char *name2;
- if ((retval = get_segmented_expression (expP)) == SEG_UNKNOWN)
+ if ((retval = get_segmented_expression (expP)) == undefined_section)
{
- name1 = expP->X_add_symbol ? S_GET_NAME (expP->X_add_symbol) : "";
- name2 = expP->X_subtract_symbol ?
- S_GET_NAME (expP->X_subtract_symbol) :
- "";
- if (name1 && name2)
- {
- as_warn ("Symbols \"%s\" \"%s\" are undefined: absolute 0 assumed.",
- name1, name2);
- }
+ /* There is no easy way to extract the undefined symbol from the
+ expression. */
+ if (expP->X_add_symbol != NULL
+ && S_GET_SEGMENT (expP->X_add_symbol) != expr_section)
+ as_warn ("symbol \"%s\" undefined; zero assumed",
+ S_GET_NAME (expP->X_add_symbol));
else
- {
- as_warn ("Symbol \"%s\" undefined: absolute 0 assumed.",
- name1 ? name1 : name2);
- }
- retval = expP->X_seg = SEG_ABSOLUTE;
+ as_warn ("some symbol undefined; zero assumed");
+ retval = absolute_section;
+ expP->X_op = O_constant;
expP->X_add_number = 0;
- expP->X_add_symbol = expP->X_subtract_symbol = NULL;
}
-#ifndef MANY_SEGMENTS
- know (retval == SEG_ABSOLUTE || retval == SEG_DATA || retval == SEG_TEXT || retval == SEG_BSS || retval == SEG_DIFFERENCE);
-#endif
+ know (retval == absolute_section || SEG_NORMAL (retval));
return (retval);
-
} /* get_known_segmented_expression() */
-
-
-/* static */ long /* JF was static, but can't be if the MD pseudos are to use it */
+offsetT
get_absolute_expression ()
{
expressionS exp;
- register segT s;
- if ((s = expression (&exp)) != SEG_ABSOLUTE)
+ expression (&exp);
+ if (exp.X_op != O_constant)
{
- if (s != SEG_ABSENT)
- {
- as_bad ("Bad Absolute Expression, absolute 0 assumed.");
- }
+ if (exp.X_op != O_absent)
+ as_bad ("bad absolute expression; zero assumed");
exp.X_add_number = 0;
}
- return (exp.X_add_number);
+ return exp.X_add_number;
}
char /* return terminator */
get_absolute_expression_and_terminator (val_pointer)
long *val_pointer; /* return value of expression */
{
- *val_pointer = get_absolute_expression ();
+ /* FIXME: val_pointer should probably be offsetT *. */
+ *val_pointer = (long) get_absolute_expression ();
return (*input_line_pointer++);
}
\f
is_it_end_of_statement ()
{
SKIP_WHITESPACE ();
- return (is_end_of_line[*input_line_pointer]);
+ return (is_end_of_line[(unsigned char) *input_line_pointer]);
} /* is_it_end_of_statement() */
void
segment = get_known_segmented_expression (&exp);
if (!need_pass_2)
{
- if (segment != now_seg && segment != SEG_ABSOLUTE)
+ if (segment != now_seg && segment != absolute_section)
as_warn ("Illegal segment \"%s\". Segment \"%s\" assumed.",
segment_name (segment),
segment_name (now_seg));
filename = demand_copy_string (&i);
demand_empty_rest_of_line ();
- path = xmalloc (i + include_dir_maxlen + 5 /* slop */ );
+ path = xmalloc ((unsigned long) i + include_dir_maxlen + 5 /* slop */ );
for (i = 0; i < include_dir_count; i++)
{
strcpy (path, include_dirs[i]);
s_ignore (arg)
int arg;
{
- extern char is_end_of_line[];
-
- while (!is_end_of_line[*input_line_pointer])
+ while (!is_end_of_line[(unsigned char) *input_line_pointer])
{
++input_line_pointer;
}
return;
} /* s_ignore() */
+/*
+ * Handle .stabX directives, which used to be open-coded.
+ * So much creeping featurism overloaded the semantics that we decided
+ * to put all .stabX thinking in one place. Here.
+ *
+ * We try to make any .stabX directive legal. Other people's AS will often
+ * do assembly-time consistency checks: eg assigning meaning to n_type bits
+ * and "protecting" you from setting them to certain values. (They also zero
+ * certain bits before emitting symbols. Tut tut.)
+ *
+ * If an expression is not absolute we either gripe or use the relocation
+ * information. Other people's assemblers silently forget information they
+ * don't need and invent information they need that you didn't supply.
+ */
+
+void
+change_to_section (name, len, exp)
+ char *name;
+ unsigned int len;
+ unsigned int exp;
+{
+#ifndef BFD_ASSEMBLER
+#ifdef MANY_SEGMENTS
+ unsigned int i;
+ extern segment_info_type segment_info[];
+
+ /* Find out if we've already got a section of this name etc */
+ for (i = SEG_E0; i < SEG_E9 && segment_info[i].scnhdr.s_name[0]; i++)
+ {
+ if (strncmp (segment_info[i].scnhdr.s_name, name, len) == 0)
+ {
+ subseg_set (i, exp);
+ return;
+ }
+ }
+ /* No section, add one */
+ strncpy (segment_info[i].scnhdr.s_name, name, 8);
+ segment_info[i].scnhdr.s_flags = 0 /* STYP_NOLOAD */;
+ subseg_set (i, exp);
+#endif
+#endif
+}
+
+/*
+ * Build a string dictionary entry for a .stabX symbol.
+ * The symbol is added to the .<secname>str section.
+ */
+
+#ifdef SEPARATE_STAB_SECTIONS
+
+static unsigned int
+get_stab_string_offset (string, secname)
+ char *string, *secname;
+{
+ segT save_seg;
+ segT seg;
+ subsegT save_subseg;
+ unsigned int length;
+ unsigned int old_gdb_string_index;
+ char *clengthP;
+ int i;
+ char c;
+ /* @@FIXME -- there should be no static data here!
+ This also has the effect of making all stab string tables large enough
+ to contain all the contents written to any of them. This only matters
+ with the Solaris native compiler for the moment, but it should be fixed
+ anyways. */
+ static unsigned int gdb_string_index = 0;
+
+ old_gdb_string_index = 0;
+ length = strlen (string);
+ clengthP = (char *) &length;
+ if (length > 0)
+ { /* Ordinary case. */
+ save_seg = now_seg;
+ save_subseg = now_subseg;
+
+ /* Create the stabstr sections, if they are not already created. */
+ {
+ char *newsecname = xmalloc (strlen (secname) + 4);
+ strcpy (newsecname, secname);
+ strcat (newsecname, "str");
+#ifdef BFD_ASSEMBLER
+ seg = bfd_get_section_by_name (stdoutput, newsecname);
+ if (seg == 0)
+ {
+ seg = bfd_make_section_old_way (stdoutput, newsecname);
+ bfd_set_section_flags (stdoutput, seg, SEC_READONLY | SEC_ALLOC);
+ }
+#else
+ subseg_new (newsecname, 0);
+#endif
+/* free (newsecname);*/
+ }
+ subseg_set (seg, save_subseg);
+ old_gdb_string_index = gdb_string_index;
+ i = 0;
+ while ((c = *string++))
+ {
+ i++;
+ gdb_string_index++;
+ FRAG_APPEND_1_CHAR (c);
+ }
+ {
+ FRAG_APPEND_1_CHAR ((char) 0);
+ i++;
+ gdb_string_index++;
+ }
+ while (i % 4 != 0)
+ {
+ FRAG_APPEND_1_CHAR ((char) 0);
+ i++;
+ gdb_string_index++;
+ }
+ subseg_set (save_seg, save_subseg);
+ }
+ return old_gdb_string_index;
+}
+
+#endif /* SEPARATE_STAB_SECTIONS */
+
+/* This can handle different kinds of stabs (s,n,d) and different
+ kinds of stab sections. */
+
+static void
+s_stab_generic (what, secname)
+ int what;
+ char *secname;
+{
+ extern int listing;
+
+ symbolS *symbol;
+ char *string;
+ int saved_type = 0;
+ int length;
+ int goof = 0;
+ long longint;
+ segT saved_seg = now_seg;
+ segT seg;
+ subsegT saved_subseg = now_subseg;
+ subsegT subseg;
+ valueT valu;
+#ifdef SEPARATE_STAB_SECTIONS
+ int seg_is_new = 0;
+#endif
+
+ valu = ((char *) obstack_next_free (&frags)) - frag_now->fr_literal;
+
+#ifdef SEPARATE_STAB_SECTIONS
+#ifdef BFD_ASSEMBLER
+ seg = bfd_get_section_by_name (stdoutput, secname);
+ if (seg == 0)
+ {
+ seg = subseg_new (secname, 0);
+ bfd_set_section_flags (stdoutput, seg,
+ SEC_READONLY | SEC_ALLOC | SEC_RELOC);
+ subseg_set (saved_seg, subseg);
+ seg_is_new = 1;
+ }
+#else
+ subseg_new (secname, 0);
+#endif
+#endif /* SEPARATE_STAB_SECTIONS */
+
+ /*
+ * Enter with input_line_pointer pointing past .stabX and any following
+ * whitespace.
+ */
+ if (what == 's')
+ {
+ string = demand_copy_C_string (&length);
+ SKIP_WHITESPACE ();
+ if (*input_line_pointer == ',')
+ input_line_pointer++;
+ else
+ {
+ as_bad ("I need a comma after symbol's name");
+ goof = 1;
+ }
+ }
+ else
+ string = "";
+
+ /*
+ * Input_line_pointer->after ','. String->symbol name.
+ */
+ if (!goof)
+ {
+#ifdef MAKE_STAB_SYMBOL
+ MAKE_STAB_SYMBOL(symbol, string, secname);
+#else
+ symbol = symbol_new (string, undefined_section, 0, (struct frag *) 0);
+#endif
+ /* Make sure that the rest of this is going to work. */
+ if (symbol == NULL)
+ as_fatal ("no stab symbol created");
+
+ switch (what)
+ {
+ case 'd':
+ S_SET_NAME (symbol, NULL); /* .stabd feature. */
+#ifdef STAB_SYMBOL_SET_VALUE
+ STAB_SYMBOL_SET_VALUE (symbol, valu);
+#else
+ S_SET_VALUE (symbol, valu);
+#endif
+#if STAB_SYMBOL_SET_SEGMENT
+#else
+ S_SET_SEGMENT (symbol, now_seg);
+#endif
+ symbol->sy_frag = frag_now;
+ break;
+
+ case 'n':
+ symbol->sy_frag = &zero_address_frag;
+ break;
+
+ case 's':
+ symbol->sy_frag = &zero_address_frag;
+ break;
+
+ default:
+ BAD_CASE (what);
+ break;
+ }
+
+ if (get_absolute_expression_and_terminator (&longint) == ',')
+ {
+ saved_type = longint;
+ S_SET_TYPE (symbol, saved_type);
+ }
+ else
+ {
+ as_bad ("I want a comma after the n_type expression");
+ goof = 1;
+ input_line_pointer--; /* Backup over a non-',' char. */
+ }
+ }
+
+ if (!goof)
+ {
+ if (get_absolute_expression_and_terminator (&longint) == ',')
+ S_SET_OTHER (symbol, longint);
+ else
+ {
+ as_bad ("I want a comma after the n_other expression");
+ goof = 1;
+ input_line_pointer--; /* Backup over a non-',' char. */
+ }
+ }
+
+ if (!goof)
+ {
+ S_SET_DESC (symbol, get_absolute_expression ());
+ if (what == 's' || what == 'n')
+ {
+ if (*input_line_pointer != ',')
+ {
+ as_bad ("I want a comma after the n_desc expression");
+ goof = 1;
+ }
+ else
+ {
+ input_line_pointer++;
+ }
+ }
+ }
+
+ /* Line is messed up - ignore it and get out of here. */
+ if (goof)
+ {
+ ignore_rest_of_line ();
+ subseg_set (saved_seg, saved_subseg);
+ return;
+ }
+
+ subseg_set (seg, subseg);
+
+#if 0 /* needed for elf only? */
+ if (seg_is_new)
+ /* allocate and discard -- filled in later */
+ (void) frag_more (12);
+#endif
+
+#ifdef SEPARATE_STAB_SECTIONS
+ {
+ char *toP;
+
+ subseg_new (secname, 0);
+ toP = frag_more (8);
+ /* the string index portion of the stab */
+ md_number_to_chars (toP, (valueT) S_GET_OFFSET_2(symbol), 4);
+ md_number_to_chars (toP + 4, (valueT) S_GET_TYPE(symbol), 1);
+ md_number_to_chars (toP + 5, (valueT) S_GET_OTHER(symbol), 1);
+ md_number_to_chars (toP + 6, (valueT) S_GET_DESC(symbol), 2);
+ }
+#endif
+
+#ifdef SEPARATE_STAB_SECTIONS
+ if (what == 's' || what == 'n')
+ {
+ cons (4);
+ input_line_pointer--;
+ }
+ else
+ {
+ char *p = frag_more (4);
+ md_number_to_chars (p, 0, 4);
+ }
+ subseg_set (saved_seg, subseg);
+#else
+ if (what == 's' || what == 'n')
+ {
+ pseudo_set (symbol);
+ S_SET_TYPE (symbol, saved_type);
+ }
+#endif
+
+#if 0 /* for elf only? */
+ if (what == 's' && S_GET_TYPE (symbol) == N_SO)
+ {
+ fragS *fragp = seg_info (seg)->frchainP->frch_root;
+ while (fragp
+ && fragp->fr_address + fragp->fr_fix < 12)
+ fragp = fragp->fr_next;
+ assert (fragp != 0);
+ assert (fragp->fr_type == rs_fill);
+ assert (fragp->fr_address == 0 && fragp->fr_fix >= 12);
+ md_number_to_chars (fragp->fr_literal, (valueT) symbol->sy_name_offset,
+ 4);
+ }
+#endif
+
+#ifndef NO_LISTING
+ if (listing)
+ switch (S_GET_TYPE (symbol))
+ {
+ case N_SLINE:
+ listing_source_line ((unsigned int) S_GET_DESC (symbol));
+ break;
+ case N_SO:
+ case N_SOL:
+ listing_source_file (string);
+ break;
+ }
+#endif /* !NO_LISTING */
+
+#ifdef SEPARATE_STAB_SECTIONS
+ subseg_set (saved_seg, saved_subseg);
+#endif
+
+ demand_empty_rest_of_line ();
+}
+
+/* Regular stab directive. */
+
+void
+s_stab (what)
+ int what;
+{
+ s_stab_generic (what, ".stab");
+}
+
+/* "Extended stabs", used in Solaris only now. */
+
+void
+s_xstab (what)
+ int what;
+{
+ int length;
+ char *secname;
+
+ secname = demand_copy_C_string (&length);
+ SKIP_WHITESPACE ();
+ if (*input_line_pointer == ',')
+ input_line_pointer++;
+ else
+ {
+ as_bad ("comma missing in .xstabs");
+ ignore_rest_of_line ();
+ return;
+ }
+ s_stab_generic (what, secname);
+}
+
+#ifdef S_SET_DESC
+
+/* Frob invented at RMS' request. Set the n_desc of a symbol. */
+
+void
+s_desc (ignore)
+ int ignore;
+{
+ char *name;
+ char c;
+ char *p;
+ symbolS *symbolP;
+ int temp;
+
+ name = input_line_pointer;
+ c = get_symbol_end ();
+ p = input_line_pointer;
+ *p = c;
+ SKIP_WHITESPACE ();
+ if (*input_line_pointer != ',')
+ {
+ *p = 0;
+ as_bad ("Expected comma after name \"%s\"", name);
+ *p = c;
+ ignore_rest_of_line ();
+ }
+ else
+ {
+ input_line_pointer++;
+ temp = get_absolute_expression ();
+ *p = 0;
+ symbolP = symbol_find_or_make (name);
+ *p = c;
+ S_SET_DESC (symbolP, temp);
+ }
+ demand_empty_rest_of_line ();
+} /* s_desc() */
+
+#endif /* defined (S_SET_DESC) */
+
/* end of read.c */
projects / binutils.git / blobdiff