/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
- Copyright 1988, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
+ Copyright 1988, 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
#include "value.h"
#include "gdbcmd.h"
#include "language.h"
-
-#ifdef USG
-#include <sys/types.h>
-#endif
-
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-
-#ifdef sgi
-/* Must do it this way only for SGIs, as other mips platforms get their
- JB_ symbols from machine/pcb.h (included via sys/user.h). */
-#include <setjmp.h>
-#endif
-
#include "gdbcore.h"
#include "symfile.h"
#include "objfiles.h"
-#ifndef MIPSMAGIC
-#ifdef MIPSEL
-#define MIPSMAGIC MIPSELMAGIC
-#else
-#define MIPSMAGIC MIPSEBMAGIC
-#endif
-#endif
-
#define VM_MIN_ADDRESS (unsigned)0x400000
+\f
+/* Some MIPS boards don't support floating point, so we permit the
+ user to turn it off. */
+int mips_fpu = 1;
-#include <sys/user.h> /* After a.out.h */
-#include <sys/file.h>
-#include <sys/stat.h>
+/* Heuristic_proc_start may hunt through the text section for a long
+ time across a 2400 baud serial line. Allows the user to limit this
+ search. */
+static unsigned int heuristic_fence_post = 0;
-\f
#define PROC_LOW_ADDR(proc) ((proc)->pdr.adr) /* least address */
#define PROC_HIGH_ADDR(proc) ((proc)->pdr.iline) /* upper address bound */
#define PROC_FRAME_OFFSET(proc) ((proc)->pdr.frameoffset)
FRAME fi;
int regno;
{
-#define SIGFRAME_BASE sizeof(struct sigcontext)
-#define SIGFRAME_PC_OFF (-SIGFRAME_BASE+ 2*sizeof(int))
-#define SIGFRAME_SP_OFF (-SIGFRAME_BASE+32*sizeof(int))
-#define SIGFRAME_RA_OFF (-SIGFRAME_BASE+34*sizeof(int))
+ /* If it is the frame for sigtramp we have a complete sigcontext
+ immediately below the frame and we get the saved registers from there.
+ If the stack layout for sigtramp changes we might have to change these
+ constants and the companion fixup_sigtramp in mipsread.c */
+#ifndef SIGFRAME_BASE
+#define SIGFRAME_BASE 0x12c /* sizeof(sigcontext) */
+#define SIGFRAME_PC_OFF (-SIGFRAME_BASE + 2 * 4)
+#define SIGFRAME_REGSAVE_OFF (-SIGFRAME_BASE + 3 * 4)
+#endif
for (; fi; fi = fi->next)
if (in_sigtramp(fi->pc, 0)) {
- /* No idea if this code works. --PB. */
int offset;
if (regno == PC_REGNUM) offset = SIGFRAME_PC_OFF;
- else if (regno == RA_REGNUM) offset = SIGFRAME_RA_OFF;
- else if (regno == SP_REGNUM) offset = SIGFRAME_SP_OFF;
+ else if (regno < 32) offset = SIGFRAME_REGSAVE_OFF + regno * 4;
else return 0;
return read_memory_integer(fi->frame + offset, 4);
}
static struct mips_extra_func_info temp_proc_desc;
static struct frame_saved_regs temp_saved_regs;
+/* This fencepost looks highly suspicious to me. Removing it also
+ seems suspicious as it could affect remote debugging across serial
+ lines. */
+
static CORE_ADDR
heuristic_proc_start(pc)
CORE_ADDR pc;
{
CORE_ADDR start_pc = pc;
- CORE_ADDR fence = start_pc - 200;
+ CORE_ADDR fence = start_pc - heuristic_fence_post;
if (start_pc == 0) return 0;
- if (fence < VM_MIN_ADDRESS) fence = VM_MIN_ADDRESS;
+
+ if (heuristic_fence_post == UINT_MAX
+ || fence < VM_MIN_ADDRESS)
+ fence = VM_MIN_ADDRESS;
/* search back for previous return */
for (start_pc -= 4; ; start_pc -= 4)
- if (start_pc < fence) return 0;
+ if (start_pc < fence)
+ {
+ /* It's not clear to me why we reach this point when
+ stop_soon_quietly, but with this test, at least we
+ don't print out warnings for every child forked (eg, on
+ if (!stop_soon_quietly)
+ {
+ if (fence == VM_MIN_ADDRESS)
+ warning("Hit beginning of text section without finding");
+ else
+ warning("Hit heuristic-fence-post without finding");
+
+ warning("enclosing function for pc 0x%x", pc);
+ }
+
+ return 0;
+ }
else if (ABOUT_TO_RETURN(start_pc))
break;
/* r0 bit means kernel trap */
int kernel_trap = PROC_REG_MASK(proc_desc) & 1;
- if (fci->frame == 0)
- {
- /* Fixup frame-pointer - only needed for top frame */
- /* This may not be quite right, if proc has a real frame register */
- if (fci->pc == PROC_LOW_ADDR(proc_desc))
- fci->frame = read_register (SP_REGNUM);
- else
- fci->frame = READ_FRAME_REG(fci, PROC_FRAME_REG(proc_desc))
- + PROC_FRAME_OFFSET(proc_desc);
- }
+ /* Fixup frame-pointer - only needed for top frame */
+ /* This may not be quite right, if proc has a real frame register */
+ if (fci->pc == PROC_LOW_ADDR(proc_desc))
+ fci->frame = read_register (SP_REGNUM);
+ else
+ fci->frame = READ_FRAME_REG(fci, PROC_FRAME_REG(proc_desc))
+ + PROC_FRAME_OFFSET(proc_desc);
if (proc_desc == &temp_proc_desc)
*fci->saved_regs = temp_saved_regs;
arguments without difficulty. */
FRAME
-setup_arbitrary_frame (stack, pc)
- FRAME_ADDR stack;
- CORE_ADDR pc;
+setup_arbitrary_frame (argc, argv)
+ int argc;
+ FRAME_ADDR *argv;
{
- return create_new_frame (stack, pc);
+ if (argc != 2)
+ error ("MIPS frame specifications require two arguments: sp and pc");
+
+ return create_new_frame (argv[0], argv[1]);
}
* Saved D18 (i.e. F19, F18)
* ...
* Saved D0 (i.e. F1, F0)
- * CALL_DUMMY (subroutine stub; see m-mips.h)
+ * CALL_DUMMY (subroutine stub; see tm-mips.h)
* Parameter build area (not yet implemented)
* (low memory)
*/
PROC_REG_MASK(proc_desc) = GEN_REG_SAVE_MASK;
- PROC_FREG_MASK(proc_desc) = FLOAT_REG_SAVE_MASK;
+ PROC_FREG_MASK(proc_desc) = mips_fpu ? FLOAT_REG_SAVE_MASK : 0;
PROC_REG_OFFSET(proc_desc) = /* offset of (Saved R31) from FP */
-sizeof(long) - 4 * SPECIAL_REG_SAVE_COUNT;
PROC_FREG_OFFSET(proc_desc) = /* offset of (Saved D18) from FP */
write_memory (save_address, (char *)&buffer, sizeof(REGISTER_TYPE));
save_address -= 4;
}
- /* save floating-points registers */
- save_address = sp + PROC_FREG_OFFSET(proc_desc);
+ /* save floating-points registers starting with high order word */
+ save_address = sp + PROC_FREG_OFFSET(proc_desc) + 4;
for (ireg = 32; --ireg >= 0; )
if (PROC_FREG_MASK(proc_desc) & (1 << ireg))
{
write_memory (sp - 8, (char *)&buffer, sizeof(REGISTER_TYPE));
buffer = read_register (LO_REGNUM);
write_memory (sp - 12, (char *)&buffer, sizeof(REGISTER_TYPE));
- buffer = read_register (FCRCS_REGNUM);
+ buffer = read_register (mips_fpu ? FCRCS_REGNUM : ZERO_REGNUM);
write_memory (sp - 16, (char *)&buffer, sizeof(REGISTER_TYPE));
- sp -= 4 * (GEN_REG_SAVE_COUNT+FLOAT_REG_SAVE_COUNT+SPECIAL_REG_SAVE_COUNT);
+ sp -= 4 * (GEN_REG_SAVE_COUNT
+ + (mips_fpu ? FLOAT_REG_SAVE_COUNT : 0)
+ + SPECIAL_REG_SAVE_COUNT);
write_register (SP_REGNUM, sp);
PROC_LOW_ADDR(proc_desc) = sp - CALL_DUMMY_SIZE + CALL_DUMMY_START_OFFSET;
PROC_HIGH_ADDR(proc_desc) = sp;
write_register (HI_REGNUM, read_memory_integer(new_sp - 8, 4));
write_register (LO_REGNUM, read_memory_integer(new_sp - 12, 4));
- write_register (FCRCS_REGNUM, read_memory_integer(new_sp - 16, 4));
+ if (mips_fpu)
+ write_register (FCRCS_REGNUM, read_memory_integer(new_sp - 16, 4));
}
}
mips_print_register (regnum, all)
int regnum, all;
{
- unsigned char raw_buffer[MAX_REGISTER_RAW_SIZE * 2]; /* *2 for doubles */
+ unsigned char raw_buffer[MAX_REGISTER_RAW_SIZE];
REGISTER_TYPE val;
/* Get the data in raw format. */
/* If an even floating pointer register, also print as double. */
if (regnum >= FP0_REGNUM && regnum < FP0_REGNUM+32
&& !((regnum-FP0_REGNUM) & 1)) {
- read_relative_register_raw_bytes (regnum+1, raw_buffer+4);
+ char dbuffer[MAX_REGISTER_RAW_SIZE];
+
+ read_relative_register_raw_bytes (regnum, dbuffer);
+ read_relative_register_raw_bytes (regnum+1, dbuffer+4);
+#ifdef REGISTER_CONVERT_TO_TYPE
+ REGISTER_CONVERT_TO_TYPE(regnum, builtin_type_double, dbuffer);
+#endif
printf_filtered ("(d%d: ", regnum-FP0_REGNUM);
- val_print (builtin_type_double, raw_buffer, 0,
+ val_print (builtin_type_double, dbuffer, 0,
stdout, 0, 1, 0, Val_pretty_default);
printf_filtered ("); ");
}
{
exponent = *p;
exponent = exponent << 1 >> (32 - SINGLE_EXP_BITS - 1);
- return ((exponent == -1) || (! exponent && *p));
+ return ((exponent == -1) || (exponent == 0 && ((*p << 1) != 0)));
}
else if (len == 8)
{
+#if TARGET_BYTE_ORDER == BIG_ENDIAN
+ exponent = *p;
+#else
exponent = *(p+1);
+#endif
exponent = exponent << 1 >> (32 - DOUBLE_EXP_BITS - 1);
return ((exponent == -1) || (! exponent && *p * *(p+1)));
}
else return 1;
}
\f
-/* To skip prologues, I use this predicate. Returns either PC
- itself if the code at PC does not look like a function prologue,
- PC+4 if it does (our caller does not need anything more fancy). */
+/* To skip prologues, I use this predicate. Returns either PC
+ itself if the code at PC does not look like a function prologue;
+ otherwise returns an address that (if we're lucky) follows
+ the prologue. */
CORE_ADDR
mips_skip_prologue(pc)
struct block *b;
unsigned long inst;
int offset;
+ int seen_sp_adjust = 0;
- /* For -g modules and most functions anyways the
- first instruction adjusts the stack.
- But we allow some number of stores before the stack adjustment.
- (These are emitted by varags functions compiled by gcc-2.0. */
+ /* Skip the typical prologue instructions. These are the stack adjustment
+ instruction and the instructions that save registers on the stack
+ or in the gcc frame. */
for (offset = 0; offset < 100; offset += 4) {
inst = read_memory_integer(pc + offset, 4);
- if ((inst & 0xffff0000) == 0x27bd0000) /* addiu $sp,$sp,offset */
- return pc + offset + 4;
- if ((inst & 0xFFE00000) != 0xAFA00000) /* sw reg,n($sp) */
+ if ((inst & 0xffff0000) == 0x27bd0000) /* addiu $sp,$sp,offset */
+ seen_sp_adjust = 1;
+ else if ((inst & 0xFFE00000) == 0xAFA00000 && (inst & 0x001F0000))
+ continue; /* sw reg,n($sp) */
+ /* reg != $zero */
+ else if ((inst & 0xFFE00000) == 0xE7A00000) /* swc1 freg,n($sp) */
+ continue;
+ else if ((inst & 0xF3E00000) == 0xA3C00000 && (inst & 0x001F0000))
+ /* sx reg,n($s8) */
+ continue; /* reg != $zero */
+ else if (inst == 0x03A0F021) /* move $s8,$sp */
+ continue;
+ else if ((inst & 0xFF9F07FF) == 0x00800021) /* move reg,$a0-$a3 */
+ continue;
+ else
break;
}
+ return pc + offset;
+
+/* FIXME schauer. The following code seems no longer necessary if we
+ always skip the typical prologue instructions. */
+
+#if 0
+ if (seen_sp_adjust)
+ return pc + offset;
/* Well, it looks like a frameless. Let's make sure.
Note that we are not called on the current PC,
return pc + 4;
return pc;
+#endif
}
-/* Figure out where the longjmp will land.
- We expect the first arg to be a pointer to the jmp_buf structure from which
- we extract the pc (JB_PC) that we will land at. The pc is copied into PC.
- This routine returns true on success. */
-
-int
-get_longjmp_target(pc)
- CORE_ADDR *pc;
+/* Given a return value in `regbuf' with a type `valtype',
+ extract and copy its value into `valbuf'. */
+void
+mips_extract_return_value (valtype, regbuf, valbuf)
+ struct type *valtype;
+ char regbuf[REGISTER_BYTES];
+ char *valbuf;
{
- CORE_ADDR jb_addr;
+ int regnum;
+
+ regnum = TYPE_CODE (valtype) == TYPE_CODE_FLT && mips_fpu ? FP0_REGNUM : 2;
+
+ memcpy (valbuf, regbuf + REGISTER_BYTE (regnum), TYPE_LENGTH (valtype));
+#ifdef REGISTER_CONVERT_TO_TYPE
+ REGISTER_CONVERT_TO_TYPE(regnum, valtype, valbuf);
+#endif
+}
- jb_addr = read_register(A0_REGNUM);
+/* Given a return value in `regbuf' with a type `valtype',
+ write it's value into the appropriate register. */
+void
+mips_store_return_value (valtype, valbuf)
+ struct type *valtype;
+ char *valbuf;
+{
+ int regnum;
+ char raw_buffer[MAX_REGISTER_RAW_SIZE];
+
+ regnum = TYPE_CODE (valtype) == TYPE_CODE_FLT && mips_fpu ? FP0_REGNUM : 2;
+ memcpy(raw_buffer, valbuf, TYPE_LENGTH (valtype));
+
+#ifdef REGISTER_CONVERT_FROM_TYPE
+ REGISTER_CONVERT_FROM_TYPE(regnum, valtype, raw_buffer);
+#endif
- if (target_read_memory(jb_addr + JB_PC * JB_ELEMENT_SIZE, pc,
- sizeof(CORE_ADDR)))
- return 0;
+ write_register_bytes(REGISTER_BYTE (regnum), raw_buffer, TYPE_LENGTH (valtype));
+}
- SWAP_TARGET_AND_HOST(pc, sizeof(CORE_ADDR));
+/* Let the user turn off floating point and set the fence post for
+ heuristic_proc_start. */
- return 1;
+void
+_initialize_mips_tdep ()
+{
+ add_show_from_set
+ (add_set_cmd ("mipsfpu", class_support, var_boolean,
+ (char *) &mips_fpu,
+ "Set use of floating point coprocessor.\n\
+Turn off to avoid using floating point instructions when calling functions\n\
+or dealing with return values.", &setlist),
+ &showlist);
+
+ add_show_from_set
+ (add_set_cmd ("heuristic-fence-post", class_support, var_uinteger,
+ (char *) &heuristic_fence_post,
+ "Set the distance searched for the start of a function.\n\
+Set number of bytes to be searched backward to find the beginning of a\n\
+function without symbols.", &setlist),
+ &showlist);
}
projects / binutils.git / blobdiff