/* Top level stuff for GDB, the GNU debugger.
- Copyright 1986-1995, 1999-2000 Free Software Foundation, Inc.
+
+ Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994,
+ 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software
+ Foundation, Inc.
This file is part of GDB.
#include "top.h"
#include "target.h"
#include "inferior.h"
-#include "call-cmds.h"
+#include "symfile.h"
+#include "gdbcore.h"
#include "getopt.h"
#include "gdb_string.h"
#include "event-loop.h"
-#if defined (TUI) || defined (GDBTK)
-/* FIXME: cagney/2000-01-31: This #include is to allow older code such
- as that found in the TUI to continue to build. */
-#include "tui/tui-file.h"
-#endif
+#include "ui-out.h"
+
+#include "interps.h"
+#include "main.h"
/* If nonzero, display time usage both at startup and for each command. */
processes UI events asynchronously. */
int event_loop_p = 1;
-/* Whether this is the command line version or not */
-int tui_version = 0;
+/* The selected interpreter. This will be used as a set command
+ variable, so it should always be malloc'ed - since
+ do_setshow_command will free it. */
+char *interpreter_p;
/* Whether xdb commands will be handled */
int xdb_commands = 0;
/* Whether dbx commands will be handled */
int dbx_commands = 0;
+/* System root path, used to find libraries etc. */
+char *gdb_sysroot = 0;
+
struct ui_file *gdb_stdout;
struct ui_file *gdb_stderr;
struct ui_file *gdb_stdlog;
/* These two are used to set the external editor commands when gdb is farming
out files to be edited by another program. */
-extern int enable_external_editor;
extern char *external_editor_command;
-#ifdef __CYGWIN__
-#include <windows.h> /* for MAX_PATH */
-#include <sys/cygwin.h> /* for cygwin32_conv_to_posix_path */
-#endif
-
/* Call command_loop. If it happens to return, pass that through as a
non-zero return status. */
static int
captured_command_loop (void *data)
{
- if (command_loop_hook == NULL)
- command_loop ();
- else
- command_loop_hook ();
+ current_interp_command_loop ();
/* FIXME: cagney/1999-11-05: A correct command_loop() implementaton
would clean things up (restoring the cleanup chain) to the state
they were just prior to the call. Technically, this means that
- the do_cleanups() below is redundant. Unfortunatly, many FUNC's
+ the do_cleanups() below is redundant. Unfortunately, many FUNCs
are not that well behaved. do_cleanups should either be replaced
with a do_cleanups call (to cover the problem) or an assertion
check to detect bad FUNCs code. */
return 1;
}
-struct captured_main_args
- {
- int argc;
- char **argv;
- };
-
static int
captured_main (void *data)
{
int count;
static int quiet = 0;
static int batch = 0;
+ static int set_args = 0;
/* Pointers to various arguments from command line. */
char *symarg = NULL;
long time_at_startup = get_run_time ();
- START_PROGRESS (argv[0], 0);
+#if defined (HAVE_SETLOCALE) && defined (HAVE_LC_MESSAGES)
+ setlocale (LC_MESSAGES, "");
+#endif
+#if defined (HAVE_SETLOCALE)
+ setlocale (LC_CTYPE, "");
+#endif
+ bindtextdomain (PACKAGE, LOCALEDIR);
+ textdomain (PACKAGE);
-#ifdef MPW
- /* Do all Mac-specific setup. */
- mac_init ();
-#endif /* MPW */
+ START_PROGRESS (argv[0], 0);
/* This needs to happen before the first use of malloc. */
- init_malloc ((PTR) NULL);
+ init_malloc (NULL);
#if defined (ALIGN_STACK_ON_STARTUP)
i = (int) &count & 0x3;
getcwd (gdb_dirbuf, sizeof (gdb_dirbuf));
current_directory = gdb_dirbuf;
-#if defined (TUI) || defined (GDBTK)
- /* Older code uses the tui_file and fputs_unfiltered_hook(). It
- should be using a customized UI_FILE object and re-initializing
- within its own _initialize function. */
- gdb_stdout = tui_fileopen (stdout);
- gdb_stderr = tui_fileopen (stderr);
- gdb_stdlog = gdb_stdout; /* for moment */
- gdb_stdtarg = gdb_stderr; /* for moment */
-#else
gdb_stdout = stdio_fileopen (stdout);
gdb_stderr = stdio_fileopen (stderr);
gdb_stdlog = gdb_stderr; /* for moment */
gdb_stdtarg = gdb_stderr; /* for moment */
-#endif
/* initialize error() */
error_init ();
+ /* Set the sysroot path. */
+#ifdef TARGET_SYSTEM_ROOT_RELOCATABLE
+ gdb_sysroot = make_relative_prefix (argv[0], BINDIR, TARGET_SYSTEM_ROOT);
+ if (gdb_sysroot)
+ {
+ struct stat s;
+ int res = 0;
+
+ if (stat (gdb_sysroot, &s) == 0)
+ if (S_ISDIR (s.st_mode))
+ res = 1;
+
+ if (res == 0)
+ {
+ xfree (gdb_sysroot);
+ gdb_sysroot = TARGET_SYSTEM_ROOT;
+ }
+ }
+ else
+ gdb_sysroot = TARGET_SYSTEM_ROOT;
+#else
+#if defined (TARGET_SYSTEM_ROOT)
+ gdb_sysroot = TARGET_SYSTEM_ROOT;
+#else
+ gdb_sysroot = "";
+#endif
+#endif
+
+ /* There will always be an interpreter. Either the one passed into
+ this captured main, or one specified by the user at start up, or
+ the console. Initialize the interpreter to the one requested by
+ the application. */
+ interpreter_p = xstrdup (context->interpreter_p);
+
/* Parse arguments and options. */
{
int c;
/* When var field is 0, use flag field to record the equivalent
short option (or arbitrary numbers starting at 10 for those
with no equivalent). */
+ enum {
+ OPT_SE = 10,
+ OPT_CD,
+ OPT_ANNOTATE,
+ OPT_STATISTICS,
+ OPT_TUI,
+ OPT_NOWINDOWS,
+ OPT_WINDOWS
+ };
static struct option long_options[] =
{
{"async", no_argument, &event_loop_p, 1},
{"noasync", no_argument, &event_loop_p, 0},
#if defined(TUI)
- {"tui", no_argument, &tui_version, 1},
+ {"tui", no_argument, 0, OPT_TUI},
#endif
{"xdb", no_argument, &xdb_commands, 1},
{"dbx", no_argument, &dbx_commands, 1},
{"fullname", no_argument, 0, 'f'},
{"f", no_argument, 0, 'f'},
- {"annotate", required_argument, 0, 12},
+ {"annotate", required_argument, 0, OPT_ANNOTATE},
{"help", no_argument, &print_help, 1},
- {"se", required_argument, 0, 10},
+ {"se", required_argument, 0, OPT_SE},
{"symbols", required_argument, 0, 's'},
{"s", required_argument, 0, 's'},
{"exec", required_argument, 0, 'e'},
{"e", required_argument, 0, 'e'},
{"core", required_argument, 0, 'c'},
{"c", required_argument, 0, 'c'},
+ {"pid", required_argument, 0, 'p'},
+ {"p", required_argument, 0, 'p'},
{"command", required_argument, 0, 'x'},
{"version", no_argument, &print_version, 1},
{"x", required_argument, 0, 'x'},
+#ifdef GDBTK
+ {"tclcommand", required_argument, 0, 'z'},
+ {"enable-external-editor", no_argument, 0, 'y'},
+ {"editor-command", required_argument, 0, 'w'},
+#endif
+ {"ui", required_argument, 0, 'i'},
+ {"interpreter", required_argument, 0, 'i'},
+ {"i", required_argument, 0, 'i'},
{"directory", required_argument, 0, 'd'},
{"d", required_argument, 0, 'd'},
- {"cd", required_argument, 0, 11},
+ {"cd", required_argument, 0, OPT_CD},
{"tty", required_argument, 0, 't'},
{"baud", required_argument, 0, 'b'},
{"b", required_argument, 0, 'b'},
- {"nw", no_argument, &use_windows, 0},
- {"nowindows", no_argument, &use_windows, 0},
- {"w", no_argument, &use_windows, 1},
- {"windows", no_argument, &use_windows, 1},
- {"statistics", no_argument, 0, 13},
+ {"nw", no_argument, NULL, OPT_NOWINDOWS},
+ {"nowindows", no_argument, NULL, OPT_NOWINDOWS},
+ {"w", no_argument, NULL, OPT_WINDOWS},
+ {"windows", no_argument, NULL, OPT_WINDOWS},
+ {"statistics", no_argument, 0, OPT_STATISTICS},
{"write", no_argument, &write_files, 1},
-/* Allow machine descriptions to add more options... */
-#ifdef ADDITIONAL_OPTIONS
- ADDITIONAL_OPTIONS
-#endif
+ {"args", no_argument, &set_args, 1},
{0, no_argument, 0, 0}
};
c = getopt_long_only (argc, argv, "",
long_options, &option_index);
- if (c == EOF)
+ if (c == EOF || set_args)
break;
/* Long option that takes an argument. */
case 0:
/* Long option that just sets a flag. */
break;
- case 10:
+ case OPT_SE:
symarg = optarg;
execarg = optarg;
break;
- case 11:
+ case OPT_CD:
cdarg = optarg;
break;
- case 12:
+ case OPT_ANNOTATE:
/* FIXME: what if the syntax is wrong (e.g. not digits)? */
annotation_level = atoi (optarg);
break;
- case 13:
+ case OPT_STATISTICS:
/* Enable the display of both time and space usage. */
display_time = 1;
display_space = 1;
break;
+ case OPT_TUI:
+ /* --tui is equivalent to -i=tui. */
+ xfree (interpreter_p);
+ interpreter_p = xstrdup ("tui");
+ break;
+ case OPT_WINDOWS:
+ /* FIXME: cagney/2003-03-01: Not sure if this option is
+ actually useful, and if it is, what it should do. */
+ use_windows = 1;
+ break;
+ case OPT_NOWINDOWS:
+ /* -nw is equivalent to -i=console. */
+ xfree (interpreter_p);
+ interpreter_p = xstrdup (INTERP_CONSOLE);
+ use_windows = 0;
+ break;
case 'f':
annotation_level = 1;
/* We have probably been invoked from emacs. Disable window interface. */
case 'c':
corearg = optarg;
break;
+ case 'p':
+ /* "corearg" is shared by "--core" and "--pid" */
+ corearg = optarg;
+ break;
case 'x':
cmdarg[ncmd++] = optarg;
if (ncmd >= cmdsize)
cmdsize * sizeof (*cmdarg));
}
break;
+#ifdef GDBTK
+ case 'z':
+ {
+extern int gdbtk_test (char *);
+ if (!gdbtk_test (optarg))
+ {
+ fprintf_unfiltered (gdb_stderr, _("%s: unable to load tclcommand file \"%s\""),
+ argv[0], optarg);
+ exit (1);
+ }
+ break;
+ }
+ case 'y':
+ /* Backwards compatibility only. */
+ break;
+ case 'w':
+ {
+ external_editor_command = xstrdup (optarg);
+ break;
+ }
+#endif /* GDBTK */
+ case 'i':
+ xfree (interpreter_p);
+ interpreter_p = xstrdup (optarg);
+ break;
case 'd':
dirarg[ndir++] = optarg;
if (ndir >= dirsize)
fprintf_unfiltered
(gdb_stderr,
- "warning: could not set baud rate to `%s'.\n", optarg);
+ _("warning: could not set baud rate to `%s'.\n"), optarg);
else
baud_rate = i;
}
+ break;
case 'l':
{
int i;
fprintf_unfiltered
(gdb_stderr,
- "warning: could not set timeout limit to `%s'.\n", optarg);
+ _("warning: could not set timeout limit to `%s'.\n"), optarg);
else
remote_timeout = i;
}
break;
-#ifdef ADDITIONAL_OPTION_CASES
- ADDITIONAL_OPTION_CASES
-#endif
case '?':
fprintf_unfiltered (gdb_stderr,
- "Use `%s --help' for a complete list of options.\n",
+ _("Use `%s --help' for a complete list of options.\n"),
argv[0]);
exit (1);
}
if (print_help || print_version)
{
use_windows = 0;
-#ifdef TUI
- /* Disable the TUI as well. */
- tui_version = 0;
-#endif
}
-#ifdef TUI
- /* An explicit --tui flag overrides the default UI, which is the
- window system. */
- if (tui_version)
- use_windows = 0;
-#endif
-
- /* OK, that's all the options. The other arguments are filenames. */
- count = 0;
- for (; optind < argc; optind++)
- switch (++count)
- {
- case 1:
- symarg = argv[optind];
- execarg = argv[optind];
- break;
- case 2:
- corearg = argv[optind];
- break;
- case 3:
- fprintf_unfiltered (gdb_stderr,
- "Excess command line arguments ignored. (%s%s)\n",
- argv[optind], (optind == argc - 1) ? "" : " ...");
- break;
- }
+ if (set_args)
+ {
+ /* The remaining options are the command-line options for the
+ inferior. The first one is the sym/exec file, and the rest
+ are arguments. */
+ if (optind >= argc)
+ {
+ fprintf_unfiltered (gdb_stderr,
+ _("%s: `--args' specified but no program specified\n"),
+ argv[0]);
+ exit (1);
+ }
+ symarg = argv[optind];
+ execarg = argv[optind];
+ ++optind;
+ set_inferior_args_vector (argc - optind, &argv[optind]);
+ }
+ else
+ {
+ /* OK, that's all the options. The other arguments are filenames. */
+ count = 0;
+ for (; optind < argc; optind++)
+ switch (++count)
+ {
+ case 1:
+ symarg = argv[optind];
+ execarg = argv[optind];
+ break;
+ case 2:
+ /* The documentation says this can be a "ProcID" as well.
+ We will try it as both a corefile and a pid. */
+ corearg = argv[optind];
+ break;
+ case 3:
+ fprintf_unfiltered (gdb_stderr,
+ _("Excess command line arguments ignored. (%s%s)\n"),
+ argv[optind], (optind == argc - 1) ? "" : " ...");
+ break;
+ }
+ }
if (batch)
quiet = 1;
}
-#if defined(TUI)
- /* Should this be moved to tui-top.c:_initialize_tui()? */
- if (tui_version)
- init_ui_hook = tuiInit;
-#endif
-
/* Initialize all files. Give the interpreter a chance to take
control of the console via the init_ui_hook()) */
gdb_init (argv[0]);
/* Do these (and anything which might call wrap_here or *_filtered)
- after initialize_all_files. */
+ after initialize_all_files() but before the interpreter has been
+ installed. Otherwize the help/version messages will be eaten by
+ the interpreter's output handler. */
+
if (print_version)
{
print_gdb_version (gdb_stdout);
exit (0);
}
- if (!quiet)
+ /* FIXME: cagney/2003-02-03: The big hack (part 1 of 2) that lets
+ GDB retain the old MI1 interpreter startup behavior. Output the
+ copyright message before the interpreter is installed. That way
+ it isn't encapsulated in MI output. */
+ if (!quiet && strcmp (interpreter_p, INTERP_MI1) == 0)
+ {
+ /* Print all the junk at the top, with trailing "..." if we are about
+ to read a symbol file (possibly slowly). */
+ print_gdb_version (gdb_stdout);
+ if (symarg)
+ printf_filtered ("..");
+ wrap_here ("");
+ gdb_flush (gdb_stdout); /* Force to screen during slow operations */
+ }
+
+
+ /* Install the default UI. All the interpreters should have had a
+ look at things by now. Initialize the default interpreter. */
+
+ {
+ /* Find it. */
+ struct interp *interp = interp_lookup (interpreter_p);
+ if (interp == NULL)
+ error ("Interpreter `%s' unrecognized", interpreter_p);
+ /* Install it. */
+ if (!interp_set (interp))
+ {
+ fprintf_unfiltered (gdb_stderr,
+ "Interpreter `%s' failed to initialize.\n",
+ interpreter_p);
+ exit (1);
+ }
+ }
+
+ /* FIXME: cagney/2003-02-03: The big hack (part 2 of 2) that lets
+ GDB retain the old MI1 interpreter startup behavior. Output the
+ copyright message after the interpreter is installed when it is
+ any sane interpreter. */
+ if (!quiet && !current_interp_named_p (INTERP_MI1))
{
/* Print all the junk at the top, with trailing "..." if we are about
to read a symbol file (possibly slowly). */
quit_pre_print = error_pre_print;
/* We may get more than one warning, don't double space all of them... */
- warning_pre_print = "\nwarning: ";
+ warning_pre_print = _("\nwarning: ");
/* Read and execute $HOME/.gdbinit file, if it exists. This is done
*before* all the command line arguments are processed; it sets
global parameters, which are independent of what file you are
debugging or what directory you are in. */
-#ifdef __CYGWIN32__
- {
- char *tmp = getenv ("HOME");
-
- if (tmp != NULL)
- {
- homedir = (char *) alloca (MAX_PATH + 1);
- cygwin32_conv_to_posix_path (tmp, homedir);
- }
- else
- homedir = NULL;
- }
-#else
homedir = getenv ("HOME");
-#endif
if (homedir)
{
homeinit = (char *) alloca (strlen (homedir) +
for (i = 0; i < ndir; i++)
catch_command_errors (directory_command, dirarg[i], 0, RETURN_MASK_ALL);
- free ((PTR) dirarg);
+ xfree (dirarg);
if (execarg != NULL
&& symarg != NULL
- && STREQ (execarg, symarg))
+ && strcmp (execarg, symarg) == 0)
{
/* The exec file and the symbol-file are the same. If we can't
open it, better only print one error message.
catch_command_errors returns non-zero on success! */
- if (catch_command_errors (exec_file_command, execarg, !batch, RETURN_MASK_ALL))
- catch_command_errors (symbol_file_command, symarg, 0, RETURN_MASK_ALL);
+ if (catch_command_errors (exec_file_attach, execarg, !batch, RETURN_MASK_ALL))
+ catch_command_errors (symbol_file_add_main, symarg, 0, RETURN_MASK_ALL);
}
else
{
if (execarg != NULL)
- catch_command_errors (exec_file_command, execarg, !batch, RETURN_MASK_ALL);
+ catch_command_errors (exec_file_attach, execarg, !batch, RETURN_MASK_ALL);
if (symarg != NULL)
- catch_command_errors (symbol_file_command, symarg, 0, RETURN_MASK_ALL);
+ catch_command_errors (symbol_file_add_main, symarg, 0, RETURN_MASK_ALL);
}
/* After the symbol file has been read, print a newline to get us
printf_filtered ("\n");
error_pre_print = "\n";
quit_pre_print = error_pre_print;
- warning_pre_print = "\nwarning: ";
+ warning_pre_print = _("\nwarning: ");
if (corearg != NULL)
{
- if (catch_command_errors (core_file_command, corearg, !batch, RETURN_MASK_ALL) == 0)
+ /* corearg may be either a corefile or a pid.
+ If its first character is a digit, try attach first
+ and then corefile. Otherwise try corefile first. */
+
+ if (isdigit (corearg[0]))
{
- /* See if the core file is really a PID. */
- if (isdigit (corearg[0]))
- catch_command_errors (attach_command, corearg, !batch, RETURN_MASK_ALL);
+ if (catch_command_errors (attach_command, corearg,
+ !batch, RETURN_MASK_ALL) == 0)
+ catch_command_errors (core_file_command, corearg,
+ !batch, RETURN_MASK_ALL);
}
+ else /* Can't be a pid, better be a corefile. */
+ catch_command_errors (core_file_command, corearg,
+ !batch, RETURN_MASK_ALL);
}
if (ttyarg != NULL)
catch_command_errors (tty_command, ttyarg, !batch, RETURN_MASK_ALL);
-#ifdef ADDITIONAL_OPTION_HANDLER
- ADDITIONAL_OPTION_HANDLER;
-#endif
-
/* Error messages should no longer be distinguished with extra output. */
error_pre_print = NULL;
quit_pre_print = NULL;
- warning_pre_print = "warning: ";
+ warning_pre_print = _("warning: ");
/* Read the .gdbinit file in the current directory, *if* it isn't
the same as the $HOME/.gdbinit file (it should exist, also). */
#endif
catch_command_errors (source_command, cmdarg[i], !batch, RETURN_MASK_ALL);
}
- free ((PTR) cmdarg);
+ xfree (cmdarg);
/* Read in the old history after all the command files have been read. */
init_history ();
{
long init_time = get_run_time () - time_at_startup;
- printf_unfiltered ("Startup time: %ld.%06ld\n",
+ printf_unfiltered (_("Startup time: %ld.%06ld\n"),
init_time / 1000000, init_time % 1000000);
}
extern char **environ;
char *lim = (char *) sbrk (0);
- printf_unfiltered ("Startup size: data size %ld\n",
+ printf_unfiltered (_("Startup size: data size %ld\n"),
(long) (lim - (char *) &environ));
#endif
}
- /* The default command loop.
- The WIN32 Gui calls this main to set up gdb's state, and
- has its own command loop. */
-#if !defined _WIN32 || defined __GNUC__
- /* GUIs generally have their own command loop, mainloop, or
- whatever. This is a good place to gain control because many
- error conditions will end up here via longjmp(). */
#if 0
/* FIXME: cagney/1999-11-06: The original main loop was like: */
while (1)
{
catch_errors (captured_command_loop, 0, "", RETURN_MASK_ALL);
}
-#endif
/* No exit -- exit is through quit_command. */
}
int
-main (int argc, char **argv)
+gdb_main (struct captured_main_args *args)
{
- struct captured_main_args args;
- args.argc = argc;
- args.argv = argv;
- catch_errors (captured_main, &args, "", RETURN_MASK_ALL);
- return 0;
+ use_windows = args->use_windows;
+ catch_errors (captured_main, args, "", RETURN_MASK_ALL);
+ /* The only way to end up here is by an error (normal exit is
+ handled by quit_force()), hence always return an error status. */
+ return 1;
}
static void
print_gdb_help (struct ui_file *stream)
{
- fputs_unfiltered ("\
+ fputs_unfiltered (_("\
This is the GNU debugger. Usage:\n\n\
- gdb [options] [executable-file [core-file or process-id]]\n\n\
+ gdb [options] [executable-file [core-file or process-id]]\n\
+ gdb [options] --args executable-file [inferior-arguments ...]\n\n\
Options:\n\n\
-", stream);
- fputs_unfiltered ("\
+"), stream);
+ fputs_unfiltered (_("\
+ --args Arguments after executable-file are passed to inferior\n\
+"), stream);
+ fputs_unfiltered (_("\
--[no]async Enable (disable) asynchronous version of CLI\n\
-", stream);
- fputs_unfiltered ("\
+"), stream);
+ fputs_unfiltered (_("\
-b BAUDRATE Set serial port baud rate used for remote debugging.\n\
--batch Exit after processing options.\n\
--cd=DIR Change current directory to DIR.\n\
--command=FILE Execute GDB commands from FILE.\n\
--core=COREFILE Analyze the core dump COREFILE.\n\
-", stream);
- fputs_unfiltered ("\
+ --pid=PID Attach to running process PID.\n\
+"), stream);
+ fputs_unfiltered (_("\
--dbx DBX compatibility mode.\n\
--directory=DIR Search for source files in DIR.\n\
--epoch Output information used by epoch emacs-GDB interface.\n\
--exec=EXECFILE Use EXECFILE as the executable.\n\
--fullname Output information used by emacs-GDB interface.\n\
--help Print this message.\n\
-", stream);
- fputs_unfiltered ("\
+"), stream);
+ fputs_unfiltered (_("\
+ --interpreter=INTERP\n\
+ Select a specific interpreter / user interface\n\
+"), stream);
+ fputs_unfiltered (_("\
--mapped Use mapped symbol files if supported on this system.\n\
--nw Do not use a window interface.\n\
- --nx Do not read ", stream);
+ --nx Do not read "), stream);
fputs_unfiltered (gdbinit, stream);
- fputs_unfiltered (" file.\n\
+ fputs_unfiltered (_(" file.\n\
--quiet Do not print version number on startup.\n\
--readnow Fully read symbol files on first access.\n\
-", stream);
- fputs_unfiltered ("\
+"), stream);
+ fputs_unfiltered (_("\
--se=FILE Use FILE as symbol file and executable file.\n\
--symbols=SYMFILE Read symbols from SYMFILE.\n\
--tty=TTY Use TTY for input/output by the program being debugged.\n\
-", stream);
+"), stream);
#if defined(TUI)
- fputs_unfiltered ("\
+ fputs_unfiltered (_("\
--tui Use a terminal user interface.\n\
-", stream);
+"), stream);
#endif
- fputs_unfiltered ("\
+ fputs_unfiltered (_("\
--version Print version information and then exit.\n\
-w Use a window interface.\n\
--write Set writing into executable and core files.\n\
--xdb XDB compatibility mode.\n\
-", stream);
-#ifdef ADDITIONAL_OPTION_HELP
- fputs_unfiltered (ADDITIONAL_OPTION_HELP, stream);
-#endif
- fputs_unfiltered ("\n\
+"), stream);
+ fputs_unfiltered (_("\n\
For more information, type \"help\" from within GDB, or consult the\n\
GDB manual (available as on-line info or a printed manual).\n\
-", stream);
+"), stream);
}
projects / binutils.git / blobdiff