. ${srcdir}/configure.tgt
+targ=${target} ; . ${srcdir}/../bfd/config.bfd
+
dnl
changequote([,])dnl
+dnl use BFD to determine the default architecture and byte order
+dnl (bfd_vec->byteorder provides the latter).
+targ=${target}
+. ${srcdir}/../bfd/config.bfd
+
+dnl We only want the first arch, if there is more than one.
+targ_archs=`echo ${targ_archs} | sed -e 's/ .*//;'`
+
+if test x"${targ_archs}" != x ; then
+ AC_DEFINE_UNQUOTED(DEFAULT_BFD_ARCH, ${targ_archs})
+fi
+if test x"${targ_defvec}" != x ; then
+ AC_DEFINE_UNQUOTED(DEFAULT_BFD_VEC, ${targ_defvec})
+fi
+
AC_PROG_AWK
AC_PROG_INSTALL
AC_CHECK_TOOL(AR, ar)
AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(DLLTOOL, dlltool)
+AC_CHECK_TOOL(WINDRES, windres)
AC_PROG_YACC
dnl MiG is needed for the Hurd.
dnl and <wchar.h> that causes AC_CHECK_HEADERS to think <curses.h> doesn't
dnl exist.
-case $host_os in solaris2.7) case "$GCC" in yes)
+case $host_os in solaris2.7 | solaris2.8) case "$GCC" in yes)
AC_DEFINE(_MSE_INT_H)
esac; esac
-AC_CHECK_HEADERS(ctype.h curses.h endian.h link.h thread_db.h proc_service.h \
+AC_CHECK_HEADERS(ctype.h endian.h link.h thread_db.h proc_service.h \
memory.h objlist.h ptrace.h sgtty.h stddef.h stdlib.h \
string.h sys/procfs.h sys/ptrace.h sys/reg.h stdint.h \
term.h termio.h termios.h unistd.h wait.h sys/wait.h \
wchar.h wctype.h asm/debugreg.h sys/debugreg.h sys/select.h \
- time.h sys/ioctl.h)
+ time.h sys/ioctl.h sys/user.h \
+ dirent.h sys/ndir.h sys/dir.h ndir.h \
+ curses.h ncurses.h)
AC_HEADER_STAT
AC_C_CONST
AC_CHECK_FUNCS(setpgid sbrk sigaction isascii bzero bcopy btowc poll sigprocmask)
AC_FUNC_ALLOCA
+# See if machine/reg.h supports the %fs and %gs i386 segment registers.
+# Older i386 BSD's don't have the r_fs and r_gs members of `struct reg'.
+AC_CACHE_CHECK([for r_fs in struct reg], gdb_cv_struct_reg_r_fs,
+[AC_TRY_COMPILE([#include <machine/reg.h>], [struct reg r; r.r_fs;],
+gdb_cv_struct_reg_r_fs=yes, gdb_cv_struct_reg_r_fs=no)])
+if test $gdb_cv_struct_reg_r_fs = yes; then
+ AC_DEFINE(HAVE_STRUCT_REG_R_FS)
+fi
+AC_CACHE_CHECK([for r_gs in struct reg], gdb_cv_struct_reg_r_gs,
+[AC_TRY_COMPILE([#include <machine/reg.h>], [struct reg r; r.r_gs;],
+gdb_cv_struct_reg_r_gs=yes, gdb_cv_struct_reg_r_gs=no)])
+if test $gdb_cv_struct_reg_r_gs = yes; then
+ AC_DEFINE(HAVE_STRUCT_REG_R_GS)
+fi
+
dnl See if ptrace.h provides the PTRACE_GETREGS request.
AC_MSG_CHECKING(for PTRACE_GETREGS)
AC_CACHE_VAL(gdb_cv_have_ptrace_getregs,
])
case ${enable_tui} in
"yes" )
- AC_DEFINE(TUI)
- BUILD_TUI=all-tui
- TUI_LIBRARY=tui/libtui.a
- ;;
- * )
- BUILD_TUI=
- TUI_LIBRARY=
- ;;
+ if test -d "${srcdir}/tui" ; then
+ CONFIG_OBS="${CONFIG_OBS} \$(SUBDIR_TUI_OBS)"
+ CONFIG_DEPS="${CONFIG_DEPS} \$(SUBDIR_TUI_DEPS)"
+ CONFIG_SRCS="${CONFIG_SRS} \$(SUBDIR_TUI_SRCS)"
+ CONFIG_INITS="${CONFIG_INITS} \$(SUBDIR_TUI_INITS)"
+ ENABLE_CFLAGS="${ENABLE_CFLAGS} \$(SUBDIR_TUI_CFLAGS)"
+ CONFIG_ALL="${CONFIG_ALL} \$(SUBDIR_TUI_ALL)"
+ CONFIG_CLEAN="${CONFIG_CLEAN} \$(SUBDIR_TUI_CLEAN)"
+ CONFIG_INSTALL="${CONFIG_INSTALL} \$(SUBDIR_TUI_INSTALL)"
+ CONFIG_UNINSTALL="${CONFIG_UNINSTALL} \$(SUBDIR_TUI_UNINSTALL)"
+ fi
+ ;;
esac
-AC_SUBST(BUILD_TUI)
-AC_SUBST(TUI_LIBRARY)
AC_ARG_ENABLE(netrom,
[ --enable-netrom Enable NetROM support],
# Don't add -Wall or -Wunused, they include -Wunused-parameter which
# causes noise.
build_warnings="-Wimplicit -Wreturn-type -Wcomment -Wtrigraphs \
--Wformat -Wparentheses -Wpointer-arith"
+-Wformat -Wparentheses -Wpointer-arith -Wuninitialized"
# Up for debate: -Wswitch -Wcomment -trigraphs -Wtrigraphs
# -Wunused-function -Wunused-label -Wunused-variable -Wunused-value
# -Wchar-subscripts -Wuninitialized -Wtraditional -Wshadow -Wcast-qual
lose
#endif],[gdb_cv_os_cygwin=yes],[gdb_cv_os_cygwin=no])])
-DLLTOOL=${DLLTOOL-dlltool}
-WINDRES=${WINDRES-windres}
-AC_SUBST(DLLTOOL)
-AC_SUBST(WINDRES)
+
+dnl Figure out which of the many generic ser-*.c files the _host_ supports.
+SER_HARDWIRE="ser-unix.o ser-pipe.o ser-tcp.o"
+case ${host} in
+ go32*-*-* ) SER_HARDWIRE=ser-go32.o ;;
+esac
+AC_SUBST(SER_HARDWIRE)
+
dnl Figure out which term library to use.
if test x$gdb_host = xgo32; then
CONFIG_OBS="${CONFIG_OBS} gdbtk.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-varobj.o gdbtk-wrapper.o"
CONFIG_INITS="${CONFIG_INITS} gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c"
CONFIG_ALL="${CONFIG_ALL} \$(SUBDIR_GDBTK_ALL)"
- CONFIG_CLEAN="${CONFIG_ALL} \$(SUBDIR_GDBTK_CLEAN)"
+ CONFIG_CLEAN="${CONFIG_CLEAN} \$(SUBDIR_GDBTK_CLEAN)"
CONFIG_INSTALL="${CONFIG_INSTALL} \$(SUBDIR_GDBTK_INSTALL)"
CONFIG_UNINSTALL="${CONFIG_UNINSTALL} \$(SUBDIR_GDBTK_UNINSTALL)"
AC_EXEEXT
AC_CONFIG_SUBDIRS($configdirs)
-AC_OUTPUT(Makefile tui/Makefile .gdbinit:gdbinit.in,
+AC_OUTPUT(Makefile .gdbinit:gdbinit.in,
[
dnl Autoconf doesn't provide a mechanism for modifying definitions
dnl provided by makefile fragments.
projects / binutils.git / blobdiff