+start-sanitize-tic80
+
+ * configure.in: Remove noconfigdirs case since gdb also
+ configures and builds for tic80-coff.
+
+end-sanitize-tic80
+
+ * configure: Set cache_file to config.cache.
+ * Makefile.in (local-distclean): Remove config.cache.
+
+
+ * COPYING: Update FSF address.
+
+start-sanitize-tic80
+
+ * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
+ noconfigdirs.
+
+end-sanitize-tic80
+
+ * Makefile.in (install-dirs): Don't crash if prefix, and hence
+ MAKEDIRS, is empty.
+
+
+ * config.sub: Tweak mn10300 entry.
+
+
+ * configure.in (host_tools): Put sim before gdb, so gdb's
+ configure.tgt can determine if the simulator was configured.
+
+
+ * config.sub: Move BeOS $os case to be with other Cygnus
+ local cases.
+
+
+ * config.sub: Remove misplaced comment that broke Linux.
+
+
+ * config.sub: Add BeOS support.
+
+
+ * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
+
+
+ * configure.in (noconfigdirs): Remove tcl and tk from
+ noconfigdirs for cygwin32 builds.
+
+start-sanitize-tic80
+
+ * configure.in (tic80-*-*): Remove ld from noconfigdirs.
+
+end-sanitize-tic80
+
+ * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
+ make-all.com, use makefile.vms instead.
+
+
+ * config.sub: Accept -lnews*.
+
+start-sanitize-d30v
+
+ * configure.in (noconfigdirs): Disable target-newlib,
+ target-examples and target-libiberty for d30v.
+
+end-sanitize-d30v
+start-sanitize-tic80
+
+ * configure.in (host_libs): Build itcl after tcl, tk.
+
+ * configure.in (host_libs): Added db, itcl.
+ (host_tools): Added sn.
+ (noconfigdirs): Added itcl, db, sn in appropriate places.
+ (native_only): Added sn.
+
+ * Makefile.in (all-db, all-sn): New targets.
+ (ALL_MODULES): Added all-sn.
+ (CROSS_CHECK_MODULES): Added check-sn.
+ (INSTALL_MODULES): Added install-sn.
+ (CLEAN_MODULES): Added clean-sn.
+
+end-sanitize-tic80
+start-sanitize-d30v
+
+ * configure.in (noconfigdirs): Enable ld for d30v.
+
+end-sanitize-d30v
+start-sanitize-tic80
+
+ * configure.in (tic80-*-*): Build compiler.
+
+end-sanitize-tic80
+start-sanitize-d30v
+
+ * configure.in (d30v-*): Remove sim directory from list of
+ unsupported d30v directories
+
+end-sanitize-d30v
+start-sanitize-d30v
+
+ * config.sub, configure.in: Add d30v target cpu.
+
+end-sanitize-d30v
+
+ * makefile.vms: New file.
+ * make-all.com: Remove.
+
+
+ * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
+
+start-sanitize-r5900
+
+ * config.sub, configure.in: add r5900
+
+end-sanitize-r5900
+
+ * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
+
+
+ * Makefile.in (ALL_MODULES): Added all-db.
+ (CROSS_CHECK_MODULES): Addec check-db.
+ (INSTALL_MODULES): Added install-db.
+ (CLEAN_MODULES): Added clean-db.
+
+
+ * config.guess: Merge with latest FSF sources.
+
+
+ * Makefile.in (ALL_MODULES): Added all-itcl.
+ (CROSS_CHECK_MODULES): Added check-itcl.
+ (INSTALL_MODULES): Added install-itcl.
+ (CLEAN_MODULES): Added clean-itcl.
+
+
+ * configure.in: build gdb for mn10200
+
+
+ * Makefile.in (all-target-winsup): Depend on all-target-libio.
+
+start-sanitize-tic80
+
+ * configure.in (tic80-*-*): Turn off most targets right now.
+
+end-sanitize-tic80
+
+ * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
+ rather than the makeinfo program.
+ (do-info): Depend upon all-texinfo.
+
+
+ * configure.in: Remove uses of config/mh-linux.
+
+ * config.sub, config.guess: Merge with latest FSF sources.
+
+start-sanitize-tic80
+
+ * config.sub (case $basic_machine): Add tic80 entries.
+
+end-sanitize-tic80
+
+ * config.sub, config.guess: Merge with latest FSF sources.
+
+
+ * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
+ * mpw-config.in: Test for NewFolderRecursive.
+ * mpw-install: Use symbolic name for startup filename.
+ * mpw-README: Add various additional details.
+
+
+ * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
+
+
+ * configure.in: Do build gcc and the target libraries for
+ the mn10200.
+
+
+ * configure.in: don't avoid building gdb for mn10300 any more
+ * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
+ instead of single-quoting it.
+
+
+ * configure.in: Don't use --with-stabs on IRIX 6.
+
+
+ * configure.in (m32r): Build gdb, libg++ now.
+
+
+ * configure.in (mips*-sgi-irix6*): Remove gdb and related
+ directories from noconfigdirs.
+
+
+ * config.sub (basic_machine): added mips16 configuration
+
+
+ * config.sub: Handle d10v-unknown.
+
+start-sanitize-v850
+
+ * gcc/depragmaize.c: Handle MSDOS's (non-unix) text files.
+
+
+ * config.sub: Handle v850-unknown.
+
+end-sanitize-v850
+
+ * Makefile.in: add findutils
+ * configure.in: add findutils to list of host_tools
+
+
+ * config.sub: Handle mn10200 and mn10300.
+
+
+ * configure.in (d10v-*): Do not build librx.
+
+
+ * configure.in (mn10300): Build everything except gdb & libgloss.
+
+
+ * config.guess: Patch for Dansk Data Elektronik servers,
+
+ For ncr, use /bin/uname rather than uname, since GNU uname does not
+
+ Patch for MIPS R4000 running System V,
+
+ Fix thinko for nextstep.
+
+
+ * config.guess: Guess mips-dec-mach_bsd4.3.
+
+ * config.guess (i?86-ncr-sysv*): Emit just enough of the minor
+ release numbers.
+ * config.guess (mips-mips-riscos*): Emit just enough of the
+ release number.
+
+ * config.guess (sparc-auspex-sunos*): Added.
+ (f300-fujitsu-*): Added.
+
+ * config.guess: Recognize a Tadpole as a sparc.
+
+
+ * config.guess: Don't assume that NextStep version is either 2 or
+ 3. NextStep 4 (aka OpenStep 4) has come out now.
+
+
+ * config.guess: Support Cray T90 that reports itself as "CRAY TS".
+
+
+ * config.sub: Contributions from bug-gnu-utils to:
+ Support plain "hppa" (no version given) architecture, reported by
+ OpenStep.
+ OpenBSD like NetBSD.
+ LynxOs is not a hardware supplier.
+
+ * config.guess: Contributions from bug-gnu-utils to add support for:
+ OpenBSD like NetBSD.
+ Stratus systems.
+ More Pyramid systems.
+ i[n>4]86 Intel chips.
+ M680[n>4]0 Motorola chips.
+ Use unknown instead of lynx for hardware manufacturer.
+
+
+ * install.sh (chmodcmd): Set to null if the DST directory already
+ exists.
+
+
+ * configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
+ not use mt-ppc target Makefile fragment any more.
+
+
+ * configure.in (*-*-windows): Exclude everything but those dirs
+ needed to build windows.
+
+
+ * Makefile.in (all-target-winsup): Depend on all-target-librx.
+
+
+ * configure.in: Exclude mmalloc from i386-windows.
+ * config/mh-windows: Add rules for building MSVC makefiles.
+
+
+ * Undo my previous change.
+
+
+ * Makefile.in (EXTRA_GCC_FLAGS): Pass down GCC_FOR_TARGET
+ unconditionally.
+ (MAKEOVERRIDES): Define (revert this part of October 18 change).
+
+
+ * Makefile.in (FLAGS_TO_PASS): Add $(HOST_FLAGS) to allow the
+ host to add it's own flags.
+ * config/mh-windows (HOST_FLAGS): Set srcroot, which is needed
+ for MSVC build procedure.
+
+
+ * configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.
+
+
+ * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
+ (CXX_FOR_TARGET): Likewise.
+ (GCC_FOR_TARGET): Define.
+ (BASE_FLAGS_TO_PASS): Remove GCC_FOR_TARGET.
+ (EXTRA_GCC_FLAGS): Define GCC_FOR_TARGET based on whether
+ CC_FOR_TARGET was specified on the command line.
+ (MAKEOVERRIDES): Don't define.
+
+
+ * configure.in (m32r): Fix spelling of libg++ libs.
+
+
+ * config.sub (-apple*): Remove, now redundant.
+
+
+ * configure: Don't get confused by CPU-VENDOR-linux-gnu.
+
+ * configure: Rework yesterday's sed script patch.
+
+ * config.sub: Merge with FSF.
+
+
+ * config.guess: Merge from FSF.
+
+ * config.guess: Use pc instead of unknown, for pc clone systems.
+ Change linux to linux-gnu.
+
+ * config.guess: Avoid non-portable tr syntax.
+
+
+ * test-build.mk (HOLES): Add "xargs" for gdb.
+
+ * configure: Avoid hpux10.20 sed bug.
+
+
+ * configure.in config/mh-windows: Add support for windows host
+ (that is a build done under the Microsoft build environment).
+
+
+ * Makefile.in: Replace all uses of srcroot with s, to shrink
+ command line lengths.
+
+ * configure.in: If configuring for newlib, pass --with-newlib to
+ subdirectories.
+ * Makefile.in (CC_FOR_TARGET): If winsup/Makefile exists, pass a
+ -Bnewlib/ and -Lwinsup to gcc.
+ (CXX_FOR_TARGET): Likewise.
+
+
+ * Makefile.in (ETC_SUPPORT): Add configure.
+
+
+ * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
+ host configuration file.
+
+
+ * configure.in: Break mn10x00 support into separate
+ mn10200 and mn10300 configurations.
+ * config.sub: Likewise.
+
+
+ * configure.in: Add lots of stuff to noconfigdirs for
+ the mn10x00 targets.
+
+ * config.sub, configure.in: Add mn10x00 support.
+
+
+ * make-all.com: Call conf-a-gas, not config-a-gas.
+
+
+ * configure.in (noconfigdirs): Don't build libgloss for arm-coff
+ targets.
+
+
+ * mpw-README: Add much more detail for native PowerMac.
+ * mpw-install: New file.
+ * mpw-configure: Add --norecursion and --help options.
+ * mpw-config.in: Translate readme and install files when
+ copying to objdir.
+ * mpw-build.in: Don't always depend on byacc and flex.
+ (install-only-top): New action.
+
+start-sanitize-v850
+
+ * configure.in: You can now configure GDB for the v850.
+
+end-sanitize-v850
+
+ * configure.in (noconfigdirs): Don't configure any C++ dirs
+ if targeting D10V.
+
+
+ * config.sub: Recognize mips64vr5000.
+
+
+ * configure.in: Use a single line for host_tools and native_only.
+
+
+ * config.sub, configure.in: Add entries for m32r.
+
+
+ * Makefile.in (inet-install): Don't run install-gzip.
+
+
+ * configure.in: Don't config lots of things for *-*-windows*.
+
+
+ * mpw-config.in: Test for mpw-true, true, and null-command scripts.
+ (host_libs, host_tools): Copy from configure.in.
+ * mpw-configure: Don't complain about directories not found.
+
+
+ * configure.in (i[345]86): Recognize i686 for pentium pro.
+ (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
+ file.
+
+ * config.guess (i[345]86): Ditto.
+
+
+ * configure.in (noconfigdirs): Removed gdb for D10V.
+
+start-sanitize-v850
+
+ * configure.in: Remove ld, target-libio, target-libg++, and
+ target-libstdc++ from noconfigdirs.
+
+end-sanitize-v850
+
+ * configure: Fix three locations where shell scripts were
+ being run directly rather than with config_shell.
+
+start-sanitize-v850
+
+ * configure.in (v850-*-*): Set up initial $noconfigdirs.
+ * config.sub (basic_machine): Recognize v850.
+
+end-sanitize-v850
+
+ * mpw-configure: Handle multiple enable/disable options and
+ pass them down recursively, handle -c and -s flags appropriately
+ depending on choice of compiler, add escape mechanism for
+ quoted arguments to gC.
+
+
+ * configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
+ solaris targets, use config/mt-ppc to set C{,XX}FLAGS_FOR_TARGETS
+ so that -mrelocatable-lib and -mno-eabi are used.
+
+ * Makefile.in (CONFIGURE_TARGET_MODULES): If target compiler does
+ not support --print-multi-lib, don't abort.
+
+
+ * config/mh-cygwin32 (CFLAGS): Define _WIN32 to be compatible
+ with normal Windows compilation environment.
+
+
+ * make-all.com: Run config-a-gas.
+ * setup.com: Don't copy subdirectory files around.
+
+
+ * configure.in (*-*-ose): Remove exclusion of libgloss for this
+ target, it now compiles correctly.
+
+
+ * mpw-config.in: Generate Mac include for elf/dwarf2.h.
+
+
+ * configure.in (d10v-*-*): Remove ld from $noconfigdirs.
+
+
+ * configure.in (native_only): Add prms.
+
+
+ * Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
+ (BINUTILS_SUPPORT_DIRS): Likewise.
+
+
+ * configure.in (d10v-*-*): Don't configure ld or gdb until the
+ d10v support is added.
+
+
+ * configure.in (d10v-*-*): New target.
+
+
+ * config.guess (HP 9000/811): Recognize this as a PA1.1
+ machine.
+
+
+ * Makefile.in (do-tar-gz): New target, split out from tail end of
+ taz target. Run each command separately, don't use pipes.
+ (taz): Use it.
+
+
+ * mpw-configure: Look for g-mpw-make.sed in config/mpw.
+ * mpw-build.in: No builds should depend on building byacc or flex,
+ they are assumed to be installed already.
+
+
+ * Makefile.in (CONFIGURE_TARGET_MODULES): Set r environment
+ variable that CC_FOR_TARGET needs.
+
+
+ * Makefile.in (CONFIGURE_TARGET_MODULES): Determine if the multlib
+ options have changed since the last time the subdirectory was
+ configured, and if it has, reconfigure.
+ (CLEAN_TARGET_MODULES): Delete multilib.out and tmpmulti.out, which
+ CONFIGURE_TARGET_MODULES uses to remember the old multilib options.
+
+
+ * Makefile.in (ALL_MODULES,CROSS_CHECK_MODULES,INSTALL_MODULES,
+ CLEAN_MODULES): Add bash.
+ (all-bash): New target.
+
+
+ * configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
+
+
+ * config.sub (basic_machine): Recognize d10v as a valid processor.
+
+
+ * mpw-configure: Add support for --bindir.
+ * mpw-build.in: Use a GCC-specific build script for GCC actions.
+
+
+ * configure.in: add bash, time, gawk to list of hosttools and things
+ to only build for native toolchains
+
+
+ * Makefile.in (docdir): Remove.
+
+
+ * Makefile.in (datadir): Set to $(prefix)/share.
+
+
+ * configure.in: build diff and patch for cygwin32-hosted
+ toolchains.
+
+
+ * config.sub: Accept -rtems*.
+
+
+ * configure.in: enable dosrel for cygwin32-hosted builds,
+ remove diff from the list of things not buildable
+ via Canadian Cross
+
+
+ * Makefile.in (TARGET_SUBDIR): Move comment to previous line so we
+ don't get ". ".
+
+
+ * configure.in (mips*-sgi-irix6*): Set noconfigdirs appropriately.
+
+
+ * Makefile.in (taz): Handle case where tex3patch didn't even get
+ checked out. Also, if it was found, put the symlink in a new util
+ subdirectory.
+
+
+ * config.guess (*:Linux:*:*): Add support for PowerPC Linux.
+
+
+ * config.sub: Recognize -openvms.
+ * configure.in (alpha*-*-*vms*): Set noconfigdirs.
+ * make-all.com, setup.com: New files.
+
+
+ * Makefile.in (taz): tex3patch moved to texinfo/util.
+
+
+ * configure: enable_gdbtk=no for cygwin32-hosted toolchains
+ * configure.in: remove make from disable-if-Can-Cross list
+ enable gdb if ${host} and ${target} are cygwin32
+
+
+ * config.guess (i?86-ncr-sysv*): Emit minor release numbers.
+ Recognize the NCR 4850 machine and NCR Pentium-based platforms.
+
+
+ * config.guess: Combine mips-mips-riscos cases, and use cpp to
+ distinguish sysv/svr4/bsd variants.
+
+
+ * configure.in: Added copyright notice.
+ * move-if-change: Added copyright notice.
+
+
+ * configure.in (powerpcle-*-solaris*): Until we get shared
+ libraries working, don't build gdb, sim, make, tcl, tk, or
+ expect.
+
+
+ * config.guess: Merge with FSF:
+
+ * config.guess (*:Linux:*:*): Add guess for sparc-unknown-linux.
+
+ * config.guess (AViiON:dgux:*:*): Fix typo in recognizing mc88110.
+
+ * config.guess: Combine two OSF1 rules.
+ * config.guess (dgux): Use /usr/bin/uname rather than uname,
+
+
+ * Makefile.in (MAKEDIRS): Removed $(tooldir).
+
+
+ * mpw-README: Document GCCIncludes.
+
+
+ * configure.in (alpha-*-linux*): Set enable_shared to yes.
+
+
+ * mpw-configure: Handle --enable-FOO and --disable-FOO.
+
+
+ * configure.in (*-*-cygwin32): Configure make.
+
+
+ * Makefile.in (inet-install): Quote value of INSTALL_MODULES.
+
+
+ * Makefile.in (all-inet): Depend on all-perl.
+
+ * Makefile.in (inet-install): New target.
+
+ * Makefile.in (all-inet): Depend on all-tcl.
+ (all-inet): Depend on all-send-pr.
+
+
+ * configure.in (powerpcle-*-solaris*): Turn off tk and tcl
+ temporarily.
+
+
+ * configure.in: Don't configure --with-gnu-ld on AIX.
+
+
+ * configure.in (powerpcle-*-solaris*): Turn off gdb temporarily.
+
+
+ * Makefile.in (ALL_MODULES): Added all-inet.
+ (CROSS_CHECK_MODULES): Added check-inet.
+ (INSTALL_MODULES): Added install-inet.
+ (CLEAN_MODULES): Added clean-inet.
+ (all-indent): New target.
+
+ * configure.in (host_tools): Added inet.
+ (native_only): Added inet.
+ (noconfigdirs): Added inet.
+
+
+ * configure.in: Don't configure libgloss if we are not configuring
+ newlib.
+
+
+ * configure.in: Don't configure libgloss for unsupported
+ architectures.
+
+
+ * Makefile.in (CLEAN_MODULES): Add clean-apache.
+
+
+ * Makefile.in (ALL_MODULES): Include all-apache.
+ (CROSS_CHECK_MODULES): Include check-apache.
+ (INSTALL_MODULES): Include install-apache.
+ (all-apache): New target.
+
+ * configure.in: Added apache everywhere perl is seen.
+
+
+ * Makefile.in: Add support for clean-{module} and
+ clean-target-{module} rules.
+
+
+ * configure.in (*-*-ose) do not build libgloss.
+
+
+ * config.guess (prep*:SunOS:5.*:*): Turn into
+ powerpele-unknown-solaris2.
+
+
+ * configure.in: Permit --enable-shared to specify a list of
+ directories.
+
+
+ * configure.in (host==solaris): Pass only the first word of $CC
+ to /usr/bin/which when checking if we're using /usr/ccs/bin/cc.
+
+
+ * Makefile.in (BASE_FLAGS_TO_PASS): pass down $(MAKE).
+
+
+ * Makefile.in (ALL_MODULES): Include all-perl.
+ (CROSS_CHECK_MODULES): Include check-perl.
+ (INSTALL_MODULES): Include install-perl.
+ (ALL_X11_MODULES): Include all-guile.
+ (CHECK_X11_MODULES): Include check-guile.
+ (INSTALL_X11_MODULES): Include install-guile.
+ (all-perl): New target.
+ (all-guile): New target.
+
+ * configure.in (host_tools): Include perl and guile.
+ (native_only): Include perl and guile.
+ (noconfigdirs): Don't build guile and perl; no ports have been
+ done.
+
+
+ * configure (--enable-*): Handle quoted option lists such as
+ --enable-sim-cflags='-g0 -O' better.
+
+
+ * Makefile.in ({,inst}all-target): New rule so we can make and
+ install all of the target directories easily.
+
+
+ * configure.in: Add missing global flag in sed substitution when
+ deleting `target-' from ${configdirs}.
+
+
+ * Makefile.in (DO_X): Don't get confused if CC contains `=' in an
+ option.
+
+ * configure.in (mips*-nec-sysvr4*): Use a host_makefile_frag of
+ config/mh-necv4.
+
+ * install.sh: Correct misspelling of transformbasename.
+
+ * config.guess: Recognize mips-*-sysv*.
+
+
+ * config.sub: Recognize mon960.
+
+
+ * configure: Restore Canadian Cross handling of BISON and LEX,
+ removed in Feb 20 change.
+
+
+ Mention make install. Remove the old copyright date as well the
+ clumsy and rather pointless copyright on the README file.
+
+
+ * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there is a
+ Makefile after running symlink-tree, then run `make distclean' to
+ avoid clobbering any generated files in srcdir.
+
+
+ * configure.in (m68k-*-netbsd*): Build everything now.
+
+
+ * Makefile.in (taz): Fix quoting.
+
+
+ * configure.in (sparclet-*-*): Build everything now.
+
+
+ * configure.in (m68k-*-linux*): New host.
+
+
+ * configure: Check for bison before byacc.
+
+
+ * Makefile.in configure: Change the way LEX and BISON/YACC are
+ set. configure now defines DEFAULT_LEX and DEFAULT_YACC by
+ searching PATH. These are used as fallbacks by Makefile.in if
+ flex/bison/byacc aren't in objdir.
+
+
+ * Makefile.in: Make everything which depends upon all-bfd also
+ depend upon all-opcodes, in case --with-commonbfdlib is used.
+
+
+ * configure.in (host *-*-cygwin32): Don't build gdb if we are
+ building NT native compilers on Unix.
+
+
+ * configure.in: Don't get CC from the host Makefile fragment if we
+ can find gcc in PATH, or if this is a Canadian Cross. Move the
+ Solaris test for /usr/ucb/cc to the post target script, just after
+ the compiler sanity test.
+
+
+ * config.sub: Merge with FSF.
+
+
+ * Makefile.in (RPATH_ENVVAR): New variable.
+ (REALLY_SET_LIB_PATH): Use it.
+ * configure.in: On HP/UX, set RPATH_ENVVAR to SHLIB_PATH.
+
+
+ * config.sub, configure.in: Recognize sparclet cpu.
+
+
+ * config.guess: Support m68k-cbm-sysv4.
+
+
+ * config.guess (*:Linux:*:*): Guess m68k-unknown-linux and
+ m68k-unknown-linuxaout from linker help string. Put quotes around
+ $ld_help_string.
+
+
+ * config.guess (powerpc-harris-powerunix): Add guess for port
+ to new target.
+
+
+ * config.guess (UNAME_VERSION): Recognize X4.x as an OSF version.
+
+
+ * configure.in: If --enable-shared was used, set SET_LIB_PATH to
+ $(REALLY_SET_LIB_PATH) in Makefile.
+ * Makefile.in (SET_LIB_PATH): New variable.
+ (REALLY_SET_LIB_PATH): New variable.
+ ($(DO_X)): Use $(SET_LIB_PATH).
+ (install.all, gcc-no-fixedincludes, $(ALL_MODULES)): Likewise.
+ ($(NATIVE_CHECK_MODULES), $(CROSS_CHECK_MODULES)): Likewise.
+ ($(INSTALL_MODULES), $(CONFIGURE_TARGET_MODULES)): Likewise.
+ ($(ALL_TARGET_MODULES), $(CHECK_TARGET_MODULES)): Likewise.
+ ($(INSTALL_TARGET_MODULES), $(ALL_X11_MODULES)): Likewise.
+ ($(CHECK_X11_MODULES), $(INSTALL_X11_MODULES)): Likewise.
+ (all-gcc, all-bootstrap, check-gcc, install-gcc): Likewise.
+ (install-dosrel): Likewise.
+ (all-opcodes): Depend upon all-libiberty.
+
+
+ * config.guess (*:CYGWIN*): New
+
+
+ * Makefile.in (all-target-winsup): All all-target-libiberty.
+
+
+ * configure.in (noconfigdirs): Add missing # in front of comment.
+
+
+ * configure.in: add second pass to things added to noconfigdirs
+ so *-gm-magic can exclude libgloss properly.
+
+
+ * mpw-configure (extralibs_name, rez_name): Set correctly
+ for MWC68K compiler.
+
+ * mpw-README: Add more info on the necessary build tools.
+
+
+ * configure.in, config.sub: Recognize cygwin32.
+
+
+ * config.guess, config.sub: Recognize A/UX.
+
+
+ * config.sub: Merge with gcc/config.sub.
+
+
+ * mpw-build.in (do-binutils): Add build of stamps.
+
+
+ * config.sub: Add recognition for mips64vr4100*-* targets.
+
+
+ * test-build.mk: Add checking of `hpux9' rather than just `hpux'.
+ Add creation of gconfigargs with `--enable-shared' turned on.
+ ($(host)-stamp-stage2-configured): Pass $(gconfigargs).
+ ($(host)-stamp-stage3-configured): Likewise.
+ (HOLES): Add chatr and ldd.
+ (i386-ncr-sysv4.3*): Add use of /usr/ccs/bin in the PATH and HOLE_DIRS.
+
+
+ * configure: Pass --nfp to recursive configures.
+
+
+ * Makefile.in (DLLTOOL): New.
+ (DLLTOOL_FOR_TARGET): New.
+ (EXTRA_HOST_FLAGS): Pass down DLLTOOL.
+ (EXTRA_TARGET_FLAGS): Ditto.
+ (EXTRA_GCC_FLAGS): Ditto.
+ (CONFIGURE_TARGET_MODULES): Ditto.
+ (DO_X): Ditto.
+ * configure: Add DLLTOOL.
+
+
+ * configure.in (i[345]86-*-sco3.2v5*): Use mh-sysv instead of
+ mh-sco, since old workarounds no longer needed, and don't
+ build ld, since libraries have weak symbols in COFF.
+
+
+ * Makefile.in (CONFIGURE_TARGET_MODULES): Add missing ';'.
+
+
+ * configure.in: Make sure that ${CC} can be used to compile an
+ executable.
+
+
+ * Makefile.in (all-gdb): Depend on $(GDB_TK).
+ * configure (GDB_TK): Set GDB_TK to either "all-tcl all-tk" or
+ nothing depending on whether gdbtk is being built.
+
+
+ * Makefile.in (newlib.tar.gz): Delete building of newlib's info files.
+
+
+ * configure.in (noconfigdirs): Put ld or gas in this early, if the
+ user specifically used --with-gnu-ld=no or --with-gnu-as=no.
+
+
+ * config-ml.in: Add support for
+ --disable-{softfloat,m68881,m68000,m68020} on m68*-*-*.
+ Simplify setting of multidirs from --disable-foo.
+
+
+ * Makefile.in (EXTRA_GCC_FLAGS): If any of the make variables
+ LANGUAGES, BOOT_CFLAGS, STMP_FIXPROTO, LIMITS_H_TEST,
+ LIBGCC1_TEST, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES, and ENQUIRE are
+ non-empty, pass them on to the GCC make.
+ (all-bootstrap): New rule that is like all-gcc, except it executes
+ the GCC bootstrap rule instead of the GCC all rule.
+
+
+ * config-ml.in (ml_realsrcdir): New, to account for ${subdir}.
+
+
+ * config.guess (AViiON:dgux:*:*): Update from FSF to add pentium
+ DG/UX support.
+
+
+ * config.sub (i*86*) Change [345] to [3456]
+
+
+ * configure.in (noconfigdirs): Add gas or ld if --with-gnu-as=no or
+ --with-gnu-ld=no.
+
* config-ml.in (rs6000*, powerpc*): Add switches to control which
* config.sub: Accept -lites* OS. From Ian Dall.
-start-sanitize-sh3e
-
- * cfg-ml-com.in (sh-*-*): Add sh3e support.
-
-end-sanitize-sh3e
* config.sub: recognise mips64vr4300 and mips64vr4300el as valid
\f
Local Variables:
-mode: indented-text
+mode: change-log
left-margin: 8
-fill-column: 74
+fill-column: 76
version-control: never
End:
projects / binutils.git / blobdiff