-##Copyright (C) 1991 Free Software Foundation, Inc.
+##Copyright (C) 1991, 1992 Free Software Foundation, Inc.
# Makefile for GDB documentation.
# This file is part of GDB.
prefix = /usr/local
-bindir = $(prefix)/bin
-datadir = $(prefix)/lib
-libdir = $(prefix)/lib
-mandir = $(datadir)/man
-man1dir = $(mandir)/man1
-man2dir = $(mandir)/man2
-man3dir = $(mandir)/man3
-man4dir = $(mandir)/man4
-man5dir = $(mandir)/man5
-man6dir = $(mandir)/man6
-man7dir = $(mandir)/man7
-man8dir = $(mandir)/man8
-man9dir = $(mandir)/man9
infodir = $(prefix)/info
-includedir = $(prefix)/include
-docdir = $(datadir)/doc
SHELL = /bin/sh
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = $(INSTALL)
-AR = ar
-AR_FLAGS = qv
-BISON = bison
-RANLIB = ranlib
-
-#### Host, target, and site specific Makefile fragments come in here.
-###
# main GDB source directory
-gdbdir = ..
-
-# Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
-# Berkeley/Sun don't have quite enough.
-#M4=/usr/5bin/m4
-M4=gm4
+gdbdir = $(srcdir)/..
# where to find texinfo; GDB dist should include a recent one
-TEXIDIR=$(srcdir)/${gdbdir}/../texinfo/fsf
+TEXIDIR=${gdbdir}/../texinfo
# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo
# where to find texi2roff, ditto
TEXI2ROFF=texi2roff
-# Where is the source dir for the READLINE library? Traditionally in .. or .
-# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
-READLINE_DIR = $(srcdir)/${gdbdir}/../readline
+# Where is the source dir for the READLINE library doc?
+# Traditionally readline is in .. or .
+READLINE_DIR = ${gdbdir}/../readline/doc
+
+SET_TEXINPUTS = TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$$TEXINPUTS
+
+DOC_CONFIG = all
+
+# Don Knuth's TeX formatter
+TEX = tex
+
+# auxiliary program for sorting Texinfo indices
+TEXINDEX = texindex
# Main GDB manual's source files
-SFILES_DOCDIR = \
- $(srcdir)/gdb.texinfo $(srcdir)/pretex.m4 $(srcdir)/none.m4 \
- $(srcdir)/all.m4 gdbinv-m.m4 gdbinv-s.m4 gdbVN.m4
+SFILES_INCLUDED = gdb-config.texi $(srcdir)/gdbinv-s.texi
+
+SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)
+
+SFILES_DOC = $(SFILES_LOCAL) \
+ $(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texi
-# Which version of GDB manual? default includes everything
-CONFIG=all
+#### Host, target, and site specific Makefile fragments come in here.
+###
all install:
-info: gdb.info gdbint.info
-#all: gdb.info gdb.dvi refcard.dvi gdb-internals gdbint.dvi
-clean-info:
- -rm -f *.info*
+info: gdb.info gdbint.info stabs.info
+dvi: gdb.dvi refcard.dvi gdbint.dvi
+all-doc: gdb.info gdb.dvi refcard.dvi gdb-internals gdbint.dvi
install-info: info
+ -parent=`echo $(infodir)|sed -e 's@/[^/]*$$@@'`; \
+ if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
+ -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi
for i in *.info* ; do \
$(INSTALL_DATA) $$i $(infodir)/$$i ; \
done
-STAGESTUFF = *.info* gdb-all.texi gdbVN.m4
+STAGESTUFF = *.info* gdb-all.texi GDBvn.texi
# Copy the object files from a particular stage into a subdirectory.
stage1: force
-(cd stage3 ; mv -f * ..)
-rmdir stage3
-clean:
- rm -f gdb.dvi rluser.texinfo inc-hist.texi gdb-all* gdb.info* gdbVN.m4
- rm -f gdb-internals gdbint.?? gdbint.??? gdbint.info
- rm -f refcard.ps refcard.dvi rcfonts.tex refcard.log *~
+clean-info:
+ rm -f gdb.info* gdbint.info* stabs.info*
+
+clean-dvi:
+ rm -f gdb.dvi refcard.dvi gdbint.dvi stabs.dvi psref.dvi
+
+mostlyclean: clean-info clean-dvi
+ rm -f gdb.?? gdb.??? gdb.mm gdb.ms gdb.me
+ rm -f links2roff
+ rm -f refcard.ps lrefcard.ps refcard.log psref.* *~
+ rm -f gdbint.?? gdbint.??? stabs.?? stabs.???
+
+clean: mostlyclean
+ rm -f GDBvn.texi rluser.texinfo inc-hist.texi
+
+distclean: clean
+ rm -f Makefile config.status
+
+realclean: distclean
+
# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
refcard.dvi : $(srcdir)/refcard.tex
- rm -f rcfonts.tex; cp $(srcdir)/rc-cm.tex rcfonts.tex
- TEXINPUTS=$(srcdir):.:$$TEXINPUTS tex refcard.tex; rm -f refcard.log
+ $(SET_TEXINPUTS) $(TEX) refcard.tex; rm -f refcard.log
rm -f rcfonts.tex
# GDB QUICK REFERENCE (PostScript output, common PS fonts)
-refcard.ps : $(srcdir)/refcard.tex
- rm -f rcfonts.tex; cp $(srcdir)/rc-ps.tex rcfonts.tex
- TEXINPUTS=$(srcdir):.:$$TEXINPUTS tex refcard.tex
- dvips -t landscape refcard -o; rm -f refcard.dvi refcard.log
- rm -f rcfonts.tex
-
-# "Readline" appendices. Get them here so both TeX and texi2roff can find.
-rluser.texinfo: ${READLINE_DIR}/doc/rluser.texinfo
- ln -s ${READLINE_DIR}/doc/rluser.texinfo $(unsubdir) || \
- ln ${READLINE_DIR}/doc/rluser.texinfo $(unsubdir) || \
- cp ${READLINE_DIR}/doc/rluser.texinfo $(unsubdir)
-
-inc-hist.texi: ${READLINE_DIR}/doc/inc-hist.texi
- ln -s ${READLINE_DIR}/doc/inc-hist.texi $(unsubdir) || \
- ln ${READLINE_DIR}/doc/inc-hist.texi $(unsubdir) || \
- cp ${READLINE_DIR}/doc/inc-hist.texi $(unsubdir)
+refcard.ps : $(srcdir)/refcard.tex $(srcdir)/psrc.sed
+ sed -f $(srcdir)/psrc.sed $(srcdir)/refcard.tex >psref.tex
+ $(SET_TEXINPUTS) $(TEX) psref.tex
+ dvips -t landscape psref -o; mv psref.ps refcard.ps
+ rm -f psref.dvi psref.log psref.tex
+
+# GDB QUICK REFERENCE (PostScript output, common PS fonts w/long names)
+lrefcard.ps : $(srcdir)/refcard.tex $(srcdir)/lpsrc.sed
+ sed -f $(srcdir)/lpsrc.sed $(srcdir)/refcard.tex >psref.tex
+ $(SET_TEXINPUTS) $(TEX) psref.tex
+ dvips -t landscape psref -o; mv psref.ps lrefcard.ps
+ rm -f psref.dvi psref.log psref.tex
# File to record current GDB version number (copied from main dir Makefile.in)
-gdbVN.m4 : $(srcdir)/${gdbdir}/Makefile.in
- VER=`sed <$(srcdir)/${gdbdir}/Makefile.in -n 's/VERSION = //p'` echo "_define__(<_GDB_VN__>,$$VER)" > $(unsubdir)/gdbVN.m4
-
-# GDB MANUAL: texinfo source, created by preprocessing w/m4
-# If you want other configs in the makefile, add or modify instructions for
-# building source here, then change CONFIG (that way you get info, dvi,
-# roff targets automatically for your config).
-# Be sure to not create a bad gdb-all.texi if ${M4} is missing or aborts...
-# The nonsense with gdbVN.m4 is to get this to run with both Sun and GNU make.
-# Note that we can *generate* gdbVN.m4, but since we distribute one in the
+GDBvn.texi : ${gdbdir}/Makefile.in
+ echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/VERSION = //p'`" > ./GDBvn.texi
+
+# Choose configuration for GDB manual (normally `all'; normally not tied into
+# `configure' script because most users prefer generic version of manual,
+# not one for their binary config---which may not be specifically
+# defined anyways).
+gdb-config.texi: ${srcdir}/${DOC_CONFIG}-config.texi
+ ln -s ${srcdir}/${DOC_CONFIG}-config.texi gdb-config.texi || \
+ ln ${srcdir}/${DOC_CONFIG}-config.texi gdb-config.texi || \
+ cp ${srcdir}/${DOC_CONFIG}-config.texi gdb-config.texi
+
+# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
+# If your texinfo or makeinfo don't support these, get a new texinfo release
+#
+# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
+# Note that we can *generate* GDBvn.texi, but since we distribute one in the
# source directory for the benefit of people who *don't* use this makefile,
# VPATH will often tell make not to bother building it, because the one
# in the srcdir is up to date. (if not, then make should build one here).
-gdb-all.texi: ${SFILES_DOCDIR}
- if [ ! -f ./gdbVN.m4 ]; then \
- ln -s $(srcdir)/gdbVN.m4 . || \
- ln $(srcdir)/gdbVN.m4 . || \
- cp $(srcdir)/gdbVN.m4 . ; fi
- rm -f foobus.texinfo
- ${M4} $(srcdir)/pretex.m4 $(srcdir)/none.m4 $(srcdir)/all.m4 \
- gdbVN.m4 $(srcdir)/gdb.texinfo >foobus.texinfo
- rm -f gdb-all.texi
- mv foobus.texinfo $(unsubdir)/gdb-all.texi
# GDB MANUAL: TeX dvi file
-gdb.dvi : gdb-${CONFIG}.texi rluser.texinfo inc-hist.texi
- TEXINPUTS=${TEXIDIR}:.:$(srcdir):$$TEXINPUTS tex gdb-${CONFIG}.texi
- texindex gdb-${CONFIG}.??
- TEXINPUTS=${TEXIDIR}:.:$(srcdir):$$TEXINPUTS tex gdb-${CONFIG}.texi
- mv gdb-${CONFIG}.dvi $(unsubdir)/gdb.dvi
- rm -f gdb-${CONFIG}.?? gdb-${CONFIG}.???
+gdb.dvi: ${SFILES_DOC}
+ if [ ! -f ./GDBvn.texi ]; then \
+ ln -s $(srcdir)/GDBvn.texi . || \
+ ln $(srcdir)/GDBvn.texi . || \
+ cp $(srcdir)/GDBvn.texi . ; else true; fi
+ $(SET_TEXINPUTS) $(TEX) gdb.texinfo
+ $(SET_TEXINPUTS) $(TEX) gdb.texinfo
+ $(TEXINDEX) gdb.??
+ $(SET_TEXINPUTS) $(TEX) gdb.texinfo
+ rm -f gdb.?? gdb.log gdb.aux gdb.toc gdb.??s
# GDB MANUAL: info file
# We're using texinfo2, and older makeinfo's may not be able to
-# cope with all the markup. In the meantime, we distribute the info
-# files
-gdb.info: gdb-${CONFIG}.texi
- $(MAKEINFO) -o $(unsubdir)/gdb.info gdb-${CONFIG}.texi
+# cope with all the markup.
+gdb.info: ${SFILES_DOC}
+ $(MAKEINFO) -I ${READLINE_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo
# GDB MANUAL: roff translations
# Try to use a recent texi2roff. v2 was put on prep in jan91.
# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
# + @alphaenumerate is ridiculously new, turned into @enumerate
+# texi2roff doesn't have a notion of include dirs, so we have to fake
+# it out for gdb manual's include files---but only if not configured
+# in main sourcedir.
+links2roff: $(SFILES_INCLUDED)
+ if [ ! -f gdb.texinfo ]; then \
+ ln -s $(SFILES_INCLUDED) . || \
+ ln $(SFILES_INCLUDED) . || \
+ cp $(SFILES_INCLUDED) . ; \
+ fi
+ touch links2roff
+
+# "Readline" appendices. Get them also due to lack of includes,
+# regardless of whether or not configuring in main sourcedir.
+# @ftable removed due to bug in texi2roff-2; if your texi2roff
+# is newer, try just ln or cp
+rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
+ sed -e 's/^@ftable/@table/g' \
+ -e 's/^@end ftable/@end table/g' \
+ ${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo
+
+inc-hist.texi: ${READLINE_DIR}/inc-hist.texi
+ ln -s ${READLINE_DIR}/inc-hist.texi . || \
+ ln ${READLINE_DIR}/inc-hist.texi . || \
+ cp ${READLINE_DIR}/inc-hist.texi .
-# gdb manual suitable for [tn]roff -mm
-# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
-# try leaving them in
-gdb.mm: gdb-${CONFIG}.texi rluser.texinfo inc-hist.texi
+# gdb manual suitable for [gtn]roff -me
+gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
- -e '/^@c/d' \
+ -e '/^@c /d' \
-e 's/{.*,,/{/' \
- -e '/@noindent/d' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
- gdb-${CONFIG}.texi | \
- $(TEXI2ROFF) -mm | \
+ $(srcdir)/gdb.texinfo | \
+ $(TEXI2ROFF) -me | \
sed -e 's/---/\\(em/g' \
- >gdb.mm
+ >gdb.me
-# gdb manual suitable for [gtn]roff -me
-gdb.me: gdb-${CONFIG}.texi rluser.texinfo inc-hist.texi
+# gdb manual suitable for [gtn]roff -ms
+gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
- -e '/^@c/d' \
+ -e '/^@c /d' \
-e 's/{.*,,/{/' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
- gdb-${CONFIG}.texi | \
- $(TEXI2ROFF) -me | \
+ $(srcdir)/gdb.texinfo | \
+ $(TEXI2ROFF) -ms | \
sed -e 's/---/\\(em/g' \
- >gdb.me
+ >gdb.ms
-# gdb manual suitable for [gtn]roff -ms
-gdb.ms: gdb-${CONFIG}.texi rluser.texinfo inc-hist.texi
+# gdb manual suitable for [tn]roff -mm
+# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
+# try leaving them in
+gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
- -e '/^@c/d' \
+ -e '/^@c /d' \
-e 's/{.*,,/{/' \
+ -e '/@noindent/d' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
- gdb-${CONFIG}.texi | \
- $(TEXI2ROFF) -ms | \
+ $(srcdir)/gdb.texinfo | \
+ $(TEXI2ROFF) -mm | \
sed -e 's/---/\\(em/g' \
- >gdb.ms
+ >gdb.mm
# GDB INTERNALS MANUAL: TeX dvi file
gdbint.dvi : gdbint.texinfo
- TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex gdbint.texinfo
- texindex gdbint.??
- TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex gdbint.texinfo
+ $(SET_TEXINPUTS) $(TEX) gdbint.texinfo
+ $(TEXINDEX) gdbint.??
+ $(SET_TEXINPUTS) $(TEX) gdbint.texinfo
rm -f gdbint.?? gdbint.aux gdbint.cps gdbint.fns gdbint.kys \
gdbint.log gdbint.pgs gdbint.toc gdbint.tps gdbint.vrs
gdbint.info: gdbint.texinfo
$(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo
+stabs.info: stabs.texinfo
+ $(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo
+
+# STABS DOCUMENTATION: TeX dvi file
+stabs.dvi : stabs.texinfo
+ $(SET_TEXINPUTS) $(TEX) stabs.texinfo
+ $(TEXINDEX) stabs.??
+ $(SET_TEXINPUTS) $(TEX) stabs.texinfo
+ rm -f stabs.?? stabs.aux stabs.cps stabs.fns stabs.kys \
+ stabs.log stabs.pgs stabs.toc stabs.tps stabs.vrs
+
+stabs.ps: stabs.dvi
+ dvips -o stabs.ps stabs
+
force:
Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
projects / binutils.git / blobdiff