return mips_regnum (gdbarch)->fp0 + 12;
}
+/* Return 1 if REGNUM refers to a floating-point general register, raw
+ or cooked. Otherwise return 0. */
+
+static int
+mips_float_register_p (struct gdbarch *gdbarch, int regnum)
+{
+ int rawnum = regnum % gdbarch_num_regs (gdbarch);
+
+ return (rawnum >= mips_regnum (gdbarch)->fp0
+ && rawnum < mips_regnum (gdbarch)->fp0 + 32);
+}
+
#define MIPS_EABI(gdbarch) (gdbarch_tdep (gdbarch)->mips_abi \
== MIPS_ABI_EABI32 \
|| gdbarch_tdep (gdbarch)->mips_abi == MIPS_ABI_EABI64)
#define MIPS_FPU_TYPE(gdbarch) (gdbarch_tdep (gdbarch)->mips_fpu_type)
-/* MIPS16 function addresses are odd (bit 0 is set). Here are some
- functions to test, set, or clear bit 0 of addresses. */
-
-static CORE_ADDR
-is_mips16_addr (CORE_ADDR addr)
-{
- return ((addr) & 1);
-}
-
-static CORE_ADDR
-unmake_mips16_addr (CORE_ADDR addr)
-{
- return ((addr) & ~(CORE_ADDR) 1);
-}
-
-static CORE_ADDR
-make_mips16_addr (CORE_ADDR addr)
-{
- return ((addr) | (CORE_ADDR) 1);
-}
-
/* Return the MIPS ABI associated with GDBARCH. */
enum mips_abi
mips_abi (struct gdbarch *gdbarch)
}
}
+/* MIPS16 function addresses are odd (bit 0 is set). Here are some
+ functions to test, set, or clear bit 0 of addresses. */
+
+static CORE_ADDR
+is_mips16_addr (CORE_ADDR addr)
+{
+ return ((addr) & 1);
+}
+
+static CORE_ADDR
+unmake_mips16_addr (CORE_ADDR addr)
+{
+ return ((addr) & ~(CORE_ADDR) 1);
+}
+
+static CORE_ADDR
+make_mips16_addr (CORE_ADDR addr)
+{
+ return ((addr) | (CORE_ADDR) 1);
+}
+
/* Functions for setting and testing a bit in a minimal symbol that
marks it as 16-bit function. The MSB of the minimal symbol's
"info" field is used for this purpose.
static void
mips_elf_make_msymbol_special (asymbol * sym, struct minimal_symbol *msym)
{
- if (((elf_symbol_type *) (sym))->internal_elf_sym.st_other == STO_MIPS16)
+ if (ELF_ST_IS_MIPS16 (((elf_symbol_type *)
+ (sym))->internal_elf_sym.st_other))
{
MSYMBOL_TARGET_FLAG_1 (msym) = 1;
}
"f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
"f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
"f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
- "fsr", "fir", "" /*"fp" */ , "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
+ "fsr", "fir",
};
/* Names of IDT R3041 registers. */
"", "", "", "", "", "", "", "",
"", "", "", "",
"", "", "", "", "", "", "", "",
- "", "", "config", "cache", "debug", "depc", "epc", ""
+ "", "", "config", "cache", "debug", "depc", "epc",
};
/* Names of IRIX registers. */
"pc", "cause", "bad", "hi", "lo", "fsr", "fir"
};
+/* Names of registers with Linux kernels. */
+static const char *mips_linux_reg_names[NUM_MIPS_PROCESSOR_REGS] = {
+ "sr", "lo", "hi", "bad", "cause", "pc",
+ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
+ "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
+ "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
+ "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
+ "fsr", "fir"
+};
+
/* Return the name of the register corresponding to REGNO. */
static const char *
else if (32 <= rawnum && rawnum < gdbarch_num_regs (gdbarch))
{
gdb_assert (rawnum - 32 < NUM_MIPS_PROCESSOR_REGS);
- return tdep->mips_processor_reg_names[rawnum - 32];
+ if (tdep->mips_processor_reg_names[rawnum - 32])
+ return tdep->mips_processor_reg_names[rawnum - 32];
+ return "";
}
else
internal_error (__FILE__, __LINE__,
{
return (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG
&& register_size (gdbarch, regnum) == 4
- && (regnum % gdbarch_num_regs (gdbarch))
- >= mips_regnum (gdbarch)->fp0
- && (regnum % gdbarch_num_regs (gdbarch))
- < mips_regnum (gdbarch)->fp0 + 32
+ && mips_float_register_p (gdbarch, regnum)
&& TYPE_CODE (type) == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8);
}
mips_register_type (struct gdbarch *gdbarch, int regnum)
{
gdb_assert (regnum >= 0 && regnum < 2 * gdbarch_num_regs (gdbarch));
- if ((regnum % gdbarch_num_regs (gdbarch)) >= mips_regnum (gdbarch)->fp0
- && (regnum % gdbarch_num_regs (gdbarch))
- < mips_regnum (gdbarch)->fp0 + 32)
+ if (mips_float_register_p (gdbarch, regnum))
{
/* The floating-point registers raw, or cooked, always match
mips_isa_regsize(), and also map 1:1, byte for byte. */
}
else
{
+ int rawnum = regnum - gdbarch_num_regs (gdbarch);
+
/* The cooked or ABI registers. These are sized according to
the ABI (with a few complications). */
- if (regnum >= (gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp_control_status)
- && regnum <= gdbarch_num_regs (gdbarch) + MIPS_LAST_EMBED_REGNUM)
+ if (rawnum == mips_regnum (gdbarch)->fp_control_status
+ || rawnum == mips_regnum (gdbarch)->fp_implementation_revision)
+ return builtin_type (gdbarch)->builtin_int32;
+ else if (gdbarch_osabi (gdbarch) != GDB_OSABI_IRIX
+ && gdbarch_osabi (gdbarch) != GDB_OSABI_LINUX
+ && rawnum >= MIPS_FIRST_EMBED_REGNUM
+ && rawnum <= MIPS_LAST_EMBED_REGNUM)
/* The pseudo/cooked view of the embedded registers is always
32-bit. The raw view is handled below. */
return builtin_type (gdbarch)->builtin_int32;
if (TYPE_LENGTH (rawtype) == 0)
return rawtype;
- if (rawnum >= MIPS_EMBED_FP0_REGNUM && rawnum < MIPS_EMBED_FP0_REGNUM + 32)
+ if (rawnum >= mips_regnum (gdbarch)->fp0
+ && rawnum < mips_regnum (gdbarch)->fp0 + 32)
/* Present the floating point registers however the hardware did;
do not try to convert between FPU layouts. */
return rawtype;
- if (rawnum >= MIPS_EMBED_FP0_REGNUM + 32 && rawnum <= MIPS_LAST_EMBED_REGNUM)
- {
- /* The pseudo/cooked view of embedded registers is always
- 32-bit, even if the target transfers 64-bit values for them.
- New targets relying on XML descriptions should only transfer
- the necessary 32 bits, but older versions of GDB expected 64,
- so allow the target to provide 64 bits without interfering
- with the displayed type. */
- return builtin_type (gdbarch)->builtin_int32;
- }
-
/* Use pointer types for registers if we can. For n32 we can not,
since we do not have a 64-bit pointer type. */
if (mips_abi_regsize (gdbarch)
== TYPE_LENGTH (builtin_type (gdbarch)->builtin_data_ptr))
{
- if (rawnum == MIPS_SP_REGNUM || rawnum == MIPS_EMBED_BADVADDR_REGNUM)
+ if (rawnum == MIPS_SP_REGNUM
+ || rawnum == mips_regnum (gdbarch)->badvaddr)
return builtin_type (gdbarch)->builtin_data_ptr;
- else if (rawnum == MIPS_EMBED_PC_REGNUM)
+ else if (rawnum == mips_regnum (gdbarch)->pc)
return builtin_type (gdbarch)->builtin_func_ptr;
}
if (mips_abi_regsize (gdbarch) == 4 && TYPE_LENGTH (rawtype) == 8
- && rawnum >= MIPS_ZERO_REGNUM && rawnum <= MIPS_EMBED_PC_REGNUM)
+ && ((rawnum >= MIPS_ZERO_REGNUM && rawnum <= MIPS_PS_REGNUM)
+ || rawnum == mips_regnum (gdbarch)->lo
+ || rawnum == mips_regnum (gdbarch)->hi
+ || rawnum == mips_regnum (gdbarch)->badvaddr
+ || rawnum == mips_regnum (gdbarch)->cause
+ || rawnum == mips_regnum (gdbarch)->pc
+ || (mips_regnum (gdbarch)->dspacc != -1
+ && rawnum >= mips_regnum (gdbarch)->dspacc
+ && rawnum < mips_regnum (gdbarch)->dspacc + 6)))
return builtin_type (gdbarch)->builtin_int32;
+ if (gdbarch_osabi (gdbarch) != GDB_OSABI_IRIX
+ && gdbarch_osabi (gdbarch) != GDB_OSABI_LINUX
+ && rawnum >= MIPS_EMBED_FP0_REGNUM + 32
+ && rawnum <= MIPS_LAST_EMBED_REGNUM)
+ {
+ /* The pseudo/cooked view of embedded registers is always
+ 32-bit, even if the target transfers 64-bit values for them.
+ New targets relying on XML descriptions should only transfer
+ the necessary 32 bits, but older versions of GDB expected 64,
+ so allow the target to provide 64 bits without interfering
+ with the displayed type. */
+ return builtin_type (gdbarch)->builtin_int32;
+ }
+
/* For all other registers, pass through the hardware type. */
return rawtype;
}
return is_mips16_addr (memaddr);
}
+/* Various MIPS16 thunk (aka stub or trampoline) names. */
+
+static const char mips_str_mips16_call_stub[] = "__mips16_call_stub_";
+static const char mips_str_mips16_ret_stub[] = "__mips16_ret_";
+static const char mips_str_call_fp_stub[] = "__call_stub_fp_";
+static const char mips_str_call_stub[] = "__call_stub_";
+static const char mips_str_fn_stub[] = "__fn_stub_";
+
+/* This is used as a PIC thunk prefix. */
+
+static const char mips_str_pic[] = ".pic.";
+
+/* Return non-zero if the PC is inside a call thunk (aka stub or
+ trampoline) that should be treated as a temporary frame. */
+
+static int
+mips_in_frame_stub (CORE_ADDR pc)
+{
+ CORE_ADDR start_addr;
+ const char *name;
+
+ /* Find the starting address of the function containing the PC. */
+ if (find_pc_partial_function (pc, &name, &start_addr, NULL) == 0)
+ return 0;
+
+ /* If the PC is in __mips16_call_stub_*, this is a call/return stub. */
+ if (strncmp (name, mips_str_mips16_call_stub,
+ strlen (mips_str_mips16_call_stub)) == 0)
+ return 1;
+ /* If the PC is in __call_stub_*, this is a call/return or a call stub. */
+ if (strncmp (name, mips_str_call_stub, strlen (mips_str_call_stub)) == 0)
+ return 1;
+ /* If the PC is in __fn_stub_*, this is a call stub. */
+ if (strncmp (name, mips_str_fn_stub, strlen (mips_str_fn_stub)) == 0)
+ return 1;
+
+ return 0; /* Not a stub. */
+}
+
/* MIPS believes that the PC has a sign extended value. Perhaps the
all registers should be sign extended for simplicity? */
static CORE_ADDR
mips_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
- ULONGEST pc;
+ CORE_ADDR pc;
pc = frame_unwind_register_signed
(next_frame, gdbarch_num_regs (gdbarch) + mips_regnum (gdbarch)->pc);
if (is_mips16_addr (pc))
pc = unmake_mips16_addr (pc);
+ /* macro/2012-04-20: This hack skips over MIPS16 call thunks as
+ intermediate frames. In this case we can get the caller's address
+ from $ra, or if $ra contains an address within a thunk as well, then
+ it must be in the return path of __mips16_call_stub_{s,d}{f,c}_{0..10}
+ and thus the caller's address is in $s2. */
+ if (frame_relative_level (next_frame) >= 0 && mips_in_frame_stub (pc))
+ {
+ pc = frame_unwind_register_signed
+ (next_frame, gdbarch_num_regs (gdbarch) + MIPS_RA_REGNUM);
+ if (is_mips16_addr (pc))
+ pc = unmake_mips16_addr (pc);
+ if (mips_in_frame_stub (pc))
+ {
+ pc = frame_unwind_register_signed
+ (next_frame, gdbarch_num_regs (gdbarch) + MIPS_S2_REGNUM);
+ if (is_mips16_addr (pc))
+ pc = unmake_mips16_addr (pc);
+ }
+ }
return pc;
}
return ((itype_immediate (inst) ^ 0x8000) - 0x8000) << 2;
}
+/* Determine the address of the next instruction executed after the INST
+ floating condition branch instruction at PC. COUNT specifies the
+ number of the floating condition bits tested by the branch. */
+
+static CORE_ADDR
+mips32_bc1_pc (struct gdbarch *gdbarch, struct frame_info *frame,
+ ULONGEST inst, CORE_ADDR pc, int count)
+{
+ int fcsr = mips_regnum (gdbarch)->fp_control_status;
+ int cnum = (itype_rt (inst) >> 2) & (count - 1);
+ int tf = itype_rt (inst) & 1;
+ int mask = (1 << count) - 1;
+ ULONGEST fcs;
+ int cond;
+
+ if (fcsr == -1)
+ /* No way to handle; it'll most likely trap anyway. */
+ return pc;
+
+ fcs = get_frame_register_unsigned (frame, fcsr);
+ cond = ((fcs >> 24) & 0xfe) | ((fcs >> 23) & 0x01);
+
+ if (((cond >> cnum) & mask) != mask * !tf)
+ pc += mips32_relative_offset (inst);
+ else
+ pc += 4;
+
+ return pc;
+}
+
/* Determine where to set a single step breakpoint while considering
branch prediction. */
static CORE_ADDR
}
else if (itype_op (inst) == 17 && itype_rs (inst) == 8)
/* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */
+ pc = mips32_bc1_pc (gdbarch, frame, inst, pc + 4, 1);
+ else if (itype_op (inst) == 17 && itype_rs (inst) == 9
+ && (itype_rt (inst) & 2) == 0)
+ /* BC1ANY2F, BC1ANY2T: 010001 01001 xxx0x */
+ pc = mips32_bc1_pc (gdbarch, frame, inst, pc + 4, 2);
+ else if (itype_op (inst) == 17 && itype_rs (inst) == 10
+ && (itype_rt (inst) & 2) == 0)
+ /* BC1ANY4F, BC1ANY4T: 010001 01010 xxx0x */
+ pc = mips32_bc1_pc (gdbarch, frame, inst, pc + 4, 4);
+ else if (itype_op (inst) == 29)
+ /* JALX: 011101 */
+ /* The new PC will be alternate mode. */
{
- int tf = itype_rt (inst) & 0x01;
- int cnum = itype_rt (inst) >> 2;
- int fcrcs =
- get_frame_register_signed (frame,
- mips_regnum (get_frame_arch (frame))->
- fp_control_status);
- int cond = ((fcrcs >> 24) & 0xfe) | ((fcrcs >> 23) & 0x01);
-
- if (((cond >> cnum) & 0x01) == tf)
- pc += mips32_relative_offset (inst) + 4;
- else
- pc += 8;
+ unsigned long reg;
+
+ reg = jtype_target (inst) << 2;
+ /* Add 1 to indicate 16-bit mode -- invert ISA mode. */
+ pc = ((pc + 4) & ~(CORE_ADDR) 0x0fffffff) + reg + 1;
}
else
pc += 4; /* Not a branch, next instruction is easy. */
else
pc += 8; /* after the delay slot */
break;
+ case 0x1c: /* BPOSGE32 */
+ case 0x1e: /* BPOSGE64 */
+ pc += 4;
+ if (itype_rs (inst) == 0)
+ {
+ unsigned int pos = (op & 2) ? 64 : 32;
+ int dspctl = mips_regnum (gdbarch)->dspctl;
+
+ if (dspctl == -1)
+ /* No way to handle; it'll most likely trap anyway. */
+ break;
+
+ if ((get_frame_register_unsigned (frame,
+ dspctl) & 0x7f) >= pos)
+ pc += mips32_relative_offset (inst);
+ else
+ pc += 4;
+ }
+ break;
/* All of the other instructions in the REGIMM category */
default:
pc += 4;
pc = reg + ((pc + 4) & ~(CORE_ADDR) 0x0fffffff);
}
break;
- /* FIXME case JALX : */
- {
- unsigned long reg;
- reg = jtype_target (inst) << 2;
- pc = reg + ((pc + 4) & ~(CORE_ADDR) 0x0fffffff) + 1; /* yes, +1 */
- /* Add 1 to indicate 16 bit mode - Invert ISA mode */
- }
- break; /* The new PC will be alternate mode */
case 4: /* BEQ, BEQL */
equal_branch:
if (get_frame_register_signed (frame, itype_rs (inst)) ==
|| inst == 0x0399e021 /* addu $gp,$gp,$t9 */
|| inst == 0x033ce021 /* addu $gp,$t9,$gp */
)
- {
- /* These instructions are part of the prologue, but we don't
- need to do anything special to handle them. */
- }
+ {
+ /* These instructions are part of the prologue, but we don't
+ need to do anything special to handle them. */
+ }
/* The instructions below load $at or $t0 with an immediate
value in preparation for a stack adjustment via
subu $sp,$sp,[$at,$t0]. These instructions could also
initialize a local variable, so we accept them only before
a stack adjustment instruction was seen. */
else if (!seen_sp_adjust
- && (high_word == 0x3c01 /* lui $at,n */
- || high_word == 0x3c08 /* lui $t0,n */
- || high_word == 0x3421 /* ori $at,$at,n */
- || high_word == 0x3508 /* ori $t0,$t0,n */
- || high_word == 0x3401 /* ori $at,$zero,n */
- || high_word == 0x3408 /* ori $t0,$zero,n */
- ))
- {
- if (end_prologue_addr == 0)
- load_immediate_bytes += MIPS_INSN32_SIZE; /* FIXME! */
- }
+ && (high_word == 0x3c01 /* lui $at,n */
+ || high_word == 0x3c08 /* lui $t0,n */
+ || high_word == 0x3421 /* ori $at,$at,n */
+ || high_word == 0x3508 /* ori $t0,$t0,n */
+ || high_word == 0x3401 /* ori $at,$zero,n */
+ || high_word == 0x3408 /* ori $t0,$zero,n */
+ ))
+ {
+ if (end_prologue_addr == 0)
+ load_immediate_bytes += MIPS_INSN32_SIZE; /* FIXME! */
+ }
else
- {
- /* This instruction is not an instruction typically found
- in a prologue, so we must have reached the end of the
- prologue. */
- /* FIXME: brobecker/2004-10-10: Can't we just break out of this
- loop now? Why would we need to continue scanning the function
- instructions? */
- if (end_prologue_addr == 0)
- end_prologue_addr = cur_pc;
-
- /* Check for branches and jumps. For now, only jump to
- register are caught (i.e. returns). */
- if ((itype_op (inst) & 0x07) == 0 && rtype_funct (inst) == 8)
- in_delay_slot = 1;
- }
+ {
+ /* This instruction is not an instruction typically found
+ in a prologue, so we must have reached the end of the
+ prologue. */
+ /* FIXME: brobecker/2004-10-10: Can't we just break out of this
+ loop now? Why would we need to continue scanning the function
+ instructions? */
+ if (end_prologue_addr == 0)
+ end_prologue_addr = cur_pc;
+
+ /* Check for branches and jumps. For now, only jump to
+ register are caught (i.e. returns). */
+ if ((itype_op (inst) & 0x07) == 0 && rtype_funct (inst) == 8)
+ in_delay_slot = 1;
+ }
/* If the previous instruction was a jump, we must have reached
the end of the prologue by now. Stop scanning so that we do
return 0; /* fallback to the standard single-step code. */
break;
case 1: /* REGIMM */
- is_branch = ((itype_rt (insn) & 0xc) == 0); /* B{LT,GE}Z* */
+ is_branch = ((itype_rt (insn) & 0xc) == 0 /* B{LT,GE}Z* */
+ || ((itype_rt (insn) & 0x1e) == 0
+ && itype_rs (insn) == 0)); /* BPOSGE* */
break;
case 2: /* J */
case 3: /* JAL */
is_branch = 1;
break;
case 17: /* COP1 */
+ is_branch = ((itype_rs (insn) == 9 || itype_rs (insn) == 10)
+ && (itype_rt (insn) & 0x2) == 0);
+ if (is_branch) /* BC1ANY2F, BC1ANY2T, BC1ANY4F, BC1ANY4T */
+ break;
+ /* Fall through. */
case 18: /* COP2 */
case 19: /* COP3 */
is_branch = (itype_rs (insn) == 8); /* BCzF, BCzFL, BCzT, BCzTL */
static int
mips_about_to_return (struct gdbarch *gdbarch, CORE_ADDR pc)
{
- if (mips_pc_is_mips16 (pc))
- /* This mips16 case isn't necessarily reliable. Sometimes the compiler
- generates a "jr $ra"; other times it generates code to load
- the return address from the stack to an accessible register (such
- as $a3), then a "jr" using that register. This second case
- is almost impossible to distinguish from an indirect jump
- used for switch statements, so we don't even try. */
- return mips_fetch_instruction (gdbarch, pc) == 0xe820; /* jr $ra */
- else
- return mips_fetch_instruction (gdbarch, pc) == 0x3e00008; /* jr $ra */
+ ULONGEST insn;
+ ULONGEST hint;
+
+ /* This used to check for MIPS16, but this piece of code is never
+ called for MIPS16 functions. */
+ gdb_assert (!mips_pc_is_mips16 (pc));
+
+ insn = mips_fetch_instruction (gdbarch, pc);
+ hint = 0x7c0;
+ return (insn & ~hint) == 0x3e00008; /* jr(.hb) $ra */
}
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return float in $f0 and $f2\n");
mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0),
8, gdbarch_byte_order (gdbarch),
readbuf, writebuf, 0);
mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0 + 2,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0 + 2),
8, gdbarch_byte_order (gdbarch),
readbuf ? readbuf + 8 : readbuf,
writebuf ? writebuf + 8 : writebuf, 0);
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0),
TYPE_LENGTH (type),
gdbarch_byte_order (gdbarch),
readbuf, writebuf, 0);
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0),
TYPE_LENGTH (type),
gdbarch_byte_order (gdbarch),
readbuf, writebuf, 0);
{
case BFD_ENDIAN_LITTLE:
mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0 +
- 0, 4, gdbarch_byte_order (gdbarch),
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0 + 0),
+ 4, gdbarch_byte_order (gdbarch),
readbuf, writebuf, 0);
mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0 + 1,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0 + 1),
4, gdbarch_byte_order (gdbarch),
readbuf, writebuf, 4);
break;
case BFD_ENDIAN_BIG:
mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0 + 1,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0 + 1),
4, gdbarch_byte_order (gdbarch),
readbuf, writebuf, 0);
mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0 + 0,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0 + 0),
4, gdbarch_byte_order (gdbarch),
readbuf, writebuf, 4);
break;
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0),
TYPE_LENGTH (type),
gdbarch_byte_order (gdbarch),
readbuf, writebuf, 0);
struct value_print_options opts;
struct value *val;
- if (TYPE_CODE (register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
+ if (mips_float_register_p (gdbarch, regnum))
{
mips_print_fp_register (file, frame, regnum);
return;
{
if (*gdbarch_register_name (gdbarch, regnum) == '\0')
continue; /* unused register */
- if (TYPE_CODE (register_type (gdbarch, regnum)) ==
- TYPE_CODE_FLT)
+ if (mips_float_register_p (gdbarch, regnum))
break; /* End the row: reached FP register. */
/* Large registers are handled separately. */
if (register_size (gdbarch, regnum) > mips_abi_regsize (gdbarch))
{
if (*gdbarch_register_name (gdbarch, regnum) == '\0')
continue; /* unused register */
- if (TYPE_CODE (register_type (gdbarch, regnum)) ==
- TYPE_CODE_FLT)
+ if (mips_float_register_p (gdbarch, regnum))
break; /* End row: reached FP register. */
if (register_size (gdbarch, regnum) > mips_abi_regsize (gdbarch))
break; /* End row: large register. */
while (regnum < gdbarch_num_regs (gdbarch)
+ gdbarch_num_pseudo_regs (gdbarch))
{
- if (TYPE_CODE (register_type (gdbarch, regnum)) ==
- TYPE_CODE_FLT)
+ if (mips_float_register_p (gdbarch, regnum))
{
if (all) /* True for "INFO ALL-REGISTERS" command. */
regnum = print_fp_register_row (file, frame, regnum);
unsigned long inst;
int status;
int op;
+ int rs;
+ int rt;
status = target_read_memory (addr, buf, MIPS_INSN32_SIZE);
if (status)
inst = mips_fetch_instruction (gdbarch, addr);
op = itype_op (inst);
if ((inst & 0xe0000000) != 0)
- return (op >> 2 == 5 /* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */
- || op == 29 /* JALX: bits 011101 */
- || (op == 17 && itype_rs (inst) == 8));
+ {
+ rs = itype_rs (inst);
+ rt = itype_rt (inst);
+ return (op >> 2 == 5 /* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */
+ || op == 29 /* JALX: bits 011101 */
+ || (op == 17
+ && (rs == 8
/* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */
+ || (rs == 9 && (rt & 0x2) == 0)
+ /* BC1ANY2F, BC1ANY2T: bits 010001 01001 */
+ || (rs == 10 && (rt & 0x2) == 0))));
+ /* BC1ANY4F, BC1ANY4T: bits 010001 01010 */
+ }
else
switch (op & 0x07) /* extract bits 28,27,26 */
{
|| op == 9); /* JALR */
break; /* end SPECIAL */
case 1: /* REGIMM */
- op = itype_rt (inst); /* branch condition */
- return (op & 0xc) == 0;
+ rs = itype_rs (inst);
+ rt = itype_rt (inst); /* branch condition */
+ return ((rt & 0xc) == 0
/* BLTZ, BLTZL, BGEZ, BGEZL: bits 000xx */
/* BLTZAL, BLTZALL, BGEZAL, BGEZALL: 100xx */
+ || ((rt & 0x1e) == 0x1c && rs == 0));
+ /* BPOSGE32, BPOSGE64: bits 1110x */
break; /* end REGIMM */
default: /* J, JAL, BEQ, BNE, BLEZ, BGTZ */
return 1;
return bpaddr;
}
-/* If PC is in a mips16 call or return stub, return the address of the target
- PC, which is either the callee or the caller. There are several
+/* Return non-zero if SUFFIX is one of the numeric suffixes used for MIPS16
+ call stubs, one of 1, 2, 5, 6, 9, 10, or, if ZERO is non-zero, also 0. */
+
+static int
+mips_is_stub_suffix (const char *suffix, int zero)
+{
+ switch (suffix[0])
+ {
+ case '0':
+ return zero && suffix[1] == '\0';
+ case '1':
+ return suffix[1] == '\0' || (suffix[1] == '0' && suffix[2] == '\0');
+ case '2':
+ case '5':
+ case '6':
+ case '9':
+ return suffix[1] == '\0';
+ default:
+ return 0;
+ }
+}
+
+/* Return non-zero if MODE is one of the mode infixes used for MIPS16
+ call stubs, one of sf, df, sc, or dc. */
+
+static int
+mips_is_stub_mode (const char *mode)
+{
+ return ((mode[0] == 's' || mode[0] == 'd')
+ && (mode[1] == 'f' || mode[1] == 'c'));
+}
+
+/* Code at PC is a compiler-generated stub. Such a stub for a function
+ bar might have a name like __fn_stub_bar, and might look like this:
+
+ mfc1 $4, $f13
+ mfc1 $5, $f12
+ mfc1 $6, $f15
+ mfc1 $7, $f14
+
+ followed by (or interspersed with):
+
+ j bar
+
+ or:
+
+ lui $25, %hi(bar)
+ addiu $25, $25, %lo(bar)
+ jr $25
+
+ ($1 may be used in old code; for robustness we accept any register)
+ or, in PIC code:
+
+ lui $28, %hi(_gp_disp)
+ addiu $28, $28, %lo(_gp_disp)
+ addu $28, $28, $25
+ lw $25, %got(bar)
+ addiu $25, $25, %lo(bar)
+ jr $25
+
+ In the case of a __call_stub_bar stub, the sequence to set up
+ arguments might look like this:
+
+ mtc1 $4, $f13
+ mtc1 $5, $f12
+ mtc1 $6, $f15
+ mtc1 $7, $f14
+
+ followed by (or interspersed with) one of the jump sequences above.
+
+ In the case of a __call_stub_fp_bar stub, JAL or JALR is used instead
+ of J or JR, respectively, followed by:
+
+ mfc1 $2, $f0
+ mfc1 $3, $f1
+ jr $18
+
+ We are at the beginning of the stub here, and scan down and extract
+ the target address from the jump immediate instruction or, if a jump
+ register instruction is used, from the register referred. Return
+ the value of PC calculated or 0 if inconclusive.
+
+ The limit on the search is arbitrarily set to 20 instructions. FIXME. */
+
+static CORE_ADDR
+mips_get_mips16_fn_stub_pc (struct frame_info *frame, CORE_ADDR pc)
+{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ int addrreg = MIPS_ZERO_REGNUM;
+ CORE_ADDR start_pc = pc;
+ CORE_ADDR target_pc = 0;
+ CORE_ADDR addr = 0;
+ CORE_ADDR gp = 0;
+ int status = 0;
+ int i;
+
+ for (i = 0;
+ status == 0 && target_pc == 0 && i < 20;
+ i++, pc += MIPS_INSN32_SIZE)
+ {
+ ULONGEST inst = mips_fetch_instruction (gdbarch, pc);
+ CORE_ADDR imm;
+ int rt;
+ int rs;
+ int rd;
+
+ switch (itype_op (inst))
+ {
+ case 0: /* SPECIAL */
+ switch (rtype_funct (inst))
+ {
+ case 8: /* JR */
+ case 9: /* JALR */
+ rs = rtype_rs (inst);
+ if (rs == MIPS_GP_REGNUM)
+ target_pc = gp; /* Hmm... */
+ else if (rs == addrreg)
+ target_pc = addr;
+ break;
+
+ case 0x21: /* ADDU */
+ rt = rtype_rt (inst);
+ rs = rtype_rs (inst);
+ rd = rtype_rd (inst);
+ if (rd == MIPS_GP_REGNUM
+ && ((rs == MIPS_GP_REGNUM && rt == MIPS_T9_REGNUM)
+ || (rs == MIPS_T9_REGNUM && rt == MIPS_GP_REGNUM)))
+ gp += start_pc;
+ break;
+ }
+ break;
+
+ case 2: /* J */
+ case 3: /* JAL */
+ target_pc = jtype_target (inst) << 2;
+ target_pc += ((pc + 4) & ~(CORE_ADDR) 0x0fffffff);
+ break;
+
+ case 9: /* ADDIU */
+ rt = itype_rt (inst);
+ rs = itype_rs (inst);
+ if (rt == rs)
+ {
+ imm = (itype_immediate (inst) ^ 0x8000) - 0x8000;
+ if (rt == MIPS_GP_REGNUM)
+ gp += imm;
+ else if (rt == addrreg)
+ addr += imm;
+ }
+ break;
+
+ case 0xf: /* LUI */
+ rt = itype_rt (inst);
+ imm = ((itype_immediate (inst) ^ 0x8000) - 0x8000) << 16;
+ if (rt == MIPS_GP_REGNUM)
+ gp = imm;
+ else if (rt != MIPS_ZERO_REGNUM)
+ {
+ addrreg = rt;
+ addr = imm;
+ }
+ break;
+
+ case 0x23: /* LW */
+ rt = itype_rt (inst);
+ rs = itype_rs (inst);
+ imm = (itype_immediate (inst) ^ 0x8000) - 0x8000;
+ if (gp != 0 && rs == MIPS_GP_REGNUM)
+ {
+ gdb_byte buf[4];
+
+ memset (buf, 0, sizeof (buf));
+ status = target_read_memory (gp + imm, buf, sizeof (buf));
+ addrreg = rt;
+ addr = extract_signed_integer (buf, sizeof (buf), byte_order);
+ }
+ break;
+ }
+ }
+
+ return target_pc;
+}
+
+/* If PC is in a MIPS16 call or return stub, return the address of the
+ target PC, which is either the callee or the caller. There are several
cases which must be handled:
- * If the PC is in __mips16_ret_{d,s}f, this is a return stub and the
- target PC is in $31 ($ra).
+ * If the PC is in __mips16_ret_{d,s}{f,c}, this is a return stub
+ and the target PC is in $31 ($ra).
* If the PC is in __mips16_call_stub_{1..10}, this is a call stub
- and the target PC is in $2.
- * If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
- before the jal instruction, this is effectively a call stub
- and the target PC is in $2. Otherwise this is effectively
- a return stub and the target PC is in $18.
-
- See the source code for the stubs in gcc/config/mips/mips16.S for
+ and the target PC is in $2.
+ * If the PC at the start of __mips16_call_stub_{s,d}{f,c}_{0..10},
+ i.e. before the JALR instruction, this is effectively a call stub
+ and the target PC is in $2. Otherwise this is effectively
+ a return stub and the target PC is in $18.
+ * If the PC is at the start of __call_stub_fp_*, i.e. before the
+ JAL or JALR instruction, this is effectively a call stub and the
+ target PC is buried in the instruction stream. Otherwise this
+ is effectively a return stub and the target PC is in $18.
+ * If the PC is in __call_stub_* or in __fn_stub_*, this is a call
+ stub and the target PC is buried in the instruction stream.
+
+ See the source code for the stubs in gcc/config/mips/mips16.S, or the
+ stub builder in gcc/config/mips/mips.c (mips16_build_call_stub) for the
gory details. */
static CORE_ADDR
mips_skip_mips16_trampoline_code (struct frame_info *frame, CORE_ADDR pc)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
- const char *name;
CORE_ADDR start_addr;
+ const char *name;
+ size_t prefixlen;
/* Find the starting address and name of the function containing the PC. */
if (find_pc_partial_function (pc, &name, &start_addr, NULL) == 0)
return 0;
- /* If the PC is in __mips16_ret_{d,s}f, this is a return stub and the
- target PC is in $31 ($ra). */
- if (strcmp (name, "__mips16_ret_sf") == 0
- || strcmp (name, "__mips16_ret_df") == 0)
- return get_frame_register_signed (frame, MIPS_RA_REGNUM);
-
- if (strncmp (name, "__mips16_call_stub_", 19) == 0)
+ /* If the PC is in __mips16_ret_{d,s}{f,c}, this is a return stub
+ and the target PC is in $31 ($ra). */
+ prefixlen = strlen (mips_str_mips16_ret_stub);
+ if (strncmp (name, mips_str_mips16_ret_stub, prefixlen) == 0
+ && mips_is_stub_mode (name + prefixlen)
+ && name[prefixlen + 2] == '\0')
+ return get_frame_register_signed
+ (frame, gdbarch_num_regs (gdbarch) + MIPS_RA_REGNUM);
+
+ /* If the PC is in __mips16_call_stub_*, this is one of the call
+ call/return stubs. */
+ prefixlen = strlen (mips_str_mips16_call_stub);
+ if (strncmp (name, mips_str_mips16_call_stub, prefixlen) == 0)
{
/* If the PC is in __mips16_call_stub_{1..10}, this is a call stub
and the target PC is in $2. */
- if (name[19] >= '0' && name[19] <= '9')
- return get_frame_register_signed (frame, 2);
+ if (mips_is_stub_suffix (name + prefixlen, 0))
+ return get_frame_register_signed
+ (frame, gdbarch_num_regs (gdbarch) + MIPS_V0_REGNUM);
- /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
- before the jal instruction, this is effectively a call stub
+ /* If the PC at the start of __mips16_call_stub_{s,d}{f,c}_{0..10},
+ i.e. before the JALR instruction, this is effectively a call stub
and the target PC is in $2. Otherwise this is effectively
a return stub and the target PC is in $18. */
- else if (name[19] == 's' || name[19] == 'd')
+ else if (mips_is_stub_mode (name + prefixlen)
+ && name[prefixlen + 2] == '_'
+ && mips_is_stub_suffix (name + prefixlen + 3, 0))
{
if (pc == start_addr)
- {
- /* Check if the target of the stub is a compiler-generated
- stub. Such a stub for a function bar might have a name
- like __fn_stub_bar, and might look like this:
- mfc1 $4,$f13
- mfc1 $5,$f12
- mfc1 $6,$f15
- mfc1 $7,$f14
- la $1,bar (becomes a lui/addiu pair)
- jr $1
- So scan down to the lui/addi and extract the target
- address from those two instructions. */
-
- CORE_ADDR target_pc = get_frame_register_signed (frame, 2);
- int i;
-
- /* See if the name of the target function is __fn_stub_*. */
- if (find_pc_partial_function (target_pc, &name, NULL, NULL) ==
- 0)
- return target_pc;
- if (strncmp (name, "__fn_stub_", 10) != 0
- && strcmp (name, "etext") != 0
- && strcmp (name, "_etext") != 0)
- return target_pc;
-
- /* Scan through this _fn_stub_ code for the lui/addiu pair.
- The limit on the search is arbitrarily set to 20
- instructions. FIXME. */
- for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS_INSN32_SIZE)
- {
- ULONGEST inst = mips_fetch_instruction (gdbarch, target_pc);
- CORE_ADDR addr = inst;
-
- if ((inst & 0xffff0000) == 0x3c010000) /* lui $at */
- pc = (((addr & 0xffff) ^ 0x8000) - 0x8000) << 16;
- /* high word */
- else if ((inst & 0xffff0000) == 0x24210000) /* addiu $at */
- return pc + ((addr & 0xffff) ^ 0x8000) - 0x8000;
- /* low word */
- }
-
- /* Couldn't find the lui/addui pair, so return stub address. */
- return target_pc;
- }
+ /* This is the 'call' part of a call stub. The return
+ address is in $2. */
+ return get_frame_register_signed
+ (frame, gdbarch_num_regs (gdbarch) + MIPS_V0_REGNUM);
else
/* This is the 'return' part of a call stub. The return
- address is in $r18. */
- return get_frame_register_signed (frame, 18);
+ address is in $18. */
+ return get_frame_register_signed
+ (frame, gdbarch_num_regs (gdbarch) + MIPS_S2_REGNUM);
}
+ else
+ return 0; /* Not a stub. */
}
- return 0; /* not a stub */
+
+ /* If the PC is in __call_stub_* or __fn_stub*, this is one of the
+ compiler-generated call or call/return stubs. */
+ if (strncmp (name, mips_str_fn_stub, strlen (mips_str_fn_stub)) == 0
+ || strncmp (name, mips_str_call_stub, strlen (mips_str_call_stub)) == 0)
+ {
+ if (pc == start_addr)
+ /* This is the 'call' part of a call stub. Call this helper
+ to scan through this code for interesting instructions
+ and determine the final PC. */
+ return mips_get_mips16_fn_stub_pc (frame, pc);
+ else
+ /* This is the 'return' part of a call stub. The return address
+ is in $18. */
+ return get_frame_register_signed
+ (frame, gdbarch_num_regs (gdbarch) + MIPS_S2_REGNUM);
+ }
+
+ return 0; /* Not a stub. */
+}
+
+/* Return non-zero if the PC is inside a return thunk (aka stub or trampoline).
+ This implements the IN_SOLIB_RETURN_TRAMPOLINE macro. */
+
+static int
+mips_in_return_stub (struct gdbarch *gdbarch, CORE_ADDR pc, const char *name)
+{
+ CORE_ADDR start_addr;
+ size_t prefixlen;
+
+ /* Find the starting address of the function containing the PC. */
+ if (find_pc_partial_function (pc, NULL, &start_addr, NULL) == 0)
+ return 0;
+
+ /* If the PC is in __mips16_call_stub_{s,d}{f,c}_{0..10} but not at
+ the start, i.e. after the JALR instruction, this is effectively
+ a return stub. */
+ prefixlen = strlen (mips_str_mips16_call_stub);
+ if (pc != start_addr
+ && strncmp (name, mips_str_mips16_call_stub, prefixlen) == 0
+ && mips_is_stub_mode (name + prefixlen)
+ && name[prefixlen + 2] == '_'
+ && mips_is_stub_suffix (name + prefixlen + 3, 1))
+ return 1;
+
+ /* If the PC is in __call_stub_fp_* but not at the start, i.e. after
+ the JAL or JALR instruction, this is effectively a return stub. */
+ prefixlen = strlen (mips_str_call_fp_stub);
+ if (pc != start_addr
+ && strncmp (name, mips_str_call_fp_stub, prefixlen) == 0)
+ return 1;
+
+ /* Consume the .pic. prefix of any PIC stub, this function must return
+ true when the PC is in a PIC stub of a __mips16_ret_{d,s}{f,c} stub
+ or the call stub path will trigger in handle_inferior_event causing
+ it to go astray. */
+ prefixlen = strlen (mips_str_pic);
+ if (strncmp (name, mips_str_pic, prefixlen) == 0)
+ name += prefixlen;
+
+ /* If the PC is in __mips16_ret_{d,s}{f,c}, this is a return stub. */
+ prefixlen = strlen (mips_str_mips16_ret_stub);
+ if (strncmp (name, mips_str_mips16_ret_stub, prefixlen) == 0
+ && mips_is_stub_mode (name + prefixlen)
+ && name[prefixlen + 2] == '\0')
+ return 1;
+
+ return 0; /* Not a stub. */
}
/* If the current PC is the start of a non-PIC-to-PIC stub, return the
&& (stub_words[1] & 0xfc000000U) == 0x08000000
&& (stub_words[2] & 0xffff0000U) == 0x27390000
&& stub_words[3] == 0x00000000)
- return (((stub_words[0] & 0x0000ffff) << 16)
- + (stub_words[2] & 0x0000ffff));
+ return ((((stub_words[0] & 0x0000ffff) << 16)
+ + (stub_words[2] & 0x0000ffff)) ^ 0x8000) - 0x8000;
}
/* Not a recognized stub. */
static CORE_ADDR
mips_skip_trampoline_code (struct frame_info *frame, CORE_ADDR pc)
{
+ CORE_ADDR requested_pc = pc;
CORE_ADDR target_pc;
+ CORE_ADDR new_pc;
- target_pc = mips_skip_mips16_trampoline_code (frame, pc);
- if (target_pc)
- return target_pc;
+ do
+ {
+ target_pc = pc;
- target_pc = find_solib_trampoline_target (frame, pc);
- if (target_pc)
- return target_pc;
+ new_pc = mips_skip_mips16_trampoline_code (frame, pc);
+ if (new_pc)
+ {
+ pc = new_pc;
+ if (is_mips16_addr (pc))
+ pc = unmake_mips16_addr (pc);
+ }
- target_pc = mips_skip_pic_trampoline_code (frame, pc);
- if (target_pc)
- return target_pc;
+ new_pc = find_solib_trampoline_target (frame, pc);
+ if (new_pc)
+ {
+ pc = new_pc;
+ if (is_mips16_addr (pc))
+ pc = unmake_mips16_addr (pc);
+ }
- return 0;
+ new_pc = mips_skip_pic_trampoline_code (frame, pc);
+ if (new_pc)
+ {
+ pc = new_pc;
+ if (is_mips16_addr (pc))
+ pc = unmake_mips16_addr (pc);
+ }
+ }
+ while (pc != target_pc);
+
+ return pc != requested_pc ? pc : 0;
}
/* Convert a dbx stab register number (from `r' declaration) to a GDB
regnum = mips_regnum (gdbarch)->hi;
else if (num == 71)
regnum = mips_regnum (gdbarch)->lo;
+ else if (mips_regnum (gdbarch)->dspacc != -1 && num >= 72 && num < 78)
+ regnum = num + mips_regnum (gdbarch)->dspacc - 72;
else
/* This will hopefully (eventually) provoke a warning. Should
we be calling complaint() here? */
regnum = mips_regnum (gdbarch)->hi;
else if (num == 65)
regnum = mips_regnum (gdbarch)->lo;
+ else if (mips_regnum (gdbarch)->dspacc != -1 && num >= 66 && num < 72)
+ regnum = num + mips_regnum (gdbarch)->dspacc - 66;
else
/* This will hopefully (eventually) provoke a warning. Should we
be calling complaint() here? */
enum mips_fpu_type fpu_type;
struct tdesc_arch_data *tdesc_data = NULL;
int elf_fpu_type = 0;
+ const char **reg_names;
+ struct mips_regnum mips_regnum, *regnum;
+ int dspacc;
+ int dspctl;
+
+ /* Fill in the OS dependent register numbers and names. */
+ if (info.osabi == GDB_OSABI_IRIX)
+ {
+ mips_regnum.fp0 = 32;
+ mips_regnum.pc = 64;
+ mips_regnum.cause = 65;
+ mips_regnum.badvaddr = 66;
+ mips_regnum.hi = 67;
+ mips_regnum.lo = 68;
+ mips_regnum.fp_control_status = 69;
+ mips_regnum.fp_implementation_revision = 70;
+ mips_regnum.dspacc = dspacc = -1;
+ mips_regnum.dspctl = dspctl = -1;
+ num_regs = 71;
+ reg_names = mips_irix_reg_names;
+ }
+ else if (info.osabi == GDB_OSABI_LINUX)
+ {
+ mips_regnum.fp0 = 38;
+ mips_regnum.pc = 37;
+ mips_regnum.cause = 36;
+ mips_regnum.badvaddr = 35;
+ mips_regnum.hi = 34;
+ mips_regnum.lo = 33;
+ mips_regnum.fp_control_status = 70;
+ mips_regnum.fp_implementation_revision = 71;
+ mips_regnum.dspacc = -1;
+ mips_regnum.dspctl = -1;
+ dspacc = 72;
+ dspctl = 78;
+ num_regs = 79;
+ reg_names = mips_linux_reg_names;
+ }
+ else
+ {
+ mips_regnum.lo = MIPS_EMBED_LO_REGNUM;
+ mips_regnum.hi = MIPS_EMBED_HI_REGNUM;
+ mips_regnum.badvaddr = MIPS_EMBED_BADVADDR_REGNUM;
+ mips_regnum.cause = MIPS_EMBED_CAUSE_REGNUM;
+ mips_regnum.pc = MIPS_EMBED_PC_REGNUM;
+ mips_regnum.fp0 = MIPS_EMBED_FP0_REGNUM;
+ mips_regnum.fp_control_status = 70;
+ mips_regnum.fp_implementation_revision = 71;
+ mips_regnum.dspacc = dspacc = -1;
+ mips_regnum.dspctl = dspctl = -1;
+ num_regs = MIPS_LAST_EMBED_REGNUM + 1;
+ if (info.bfd_arch_info != NULL
+ && info.bfd_arch_info->mach == bfd_mach_mips3900)
+ reg_names = mips_tx39_reg_names;
+ else
+ reg_names = mips_generic_reg_names;
+ }
/* Check any target description for validity. */
if (tdesc_has_registers (info.target_desc))
valid_p &= tdesc_numbered_register (feature, tdesc_data,
- MIPS_EMBED_LO_REGNUM, "lo");
+ mips_regnum.lo, "lo");
valid_p &= tdesc_numbered_register (feature, tdesc_data,
- MIPS_EMBED_HI_REGNUM, "hi");
+ mips_regnum.hi, "hi");
valid_p &= tdesc_numbered_register (feature, tdesc_data,
- MIPS_EMBED_PC_REGNUM, "pc");
+ mips_regnum.pc, "pc");
if (!valid_p)
{
valid_p = 1;
valid_p &= tdesc_numbered_register (feature, tdesc_data,
- MIPS_EMBED_BADVADDR_REGNUM,
- "badvaddr");
+ mips_regnum.badvaddr, "badvaddr");
valid_p &= tdesc_numbered_register (feature, tdesc_data,
MIPS_PS_REGNUM, "status");
valid_p &= tdesc_numbered_register (feature, tdesc_data,
- MIPS_EMBED_CAUSE_REGNUM, "cause");
+ mips_regnum.cause, "cause");
if (!valid_p)
{
valid_p = 1;
for (i = 0; i < 32; i++)
valid_p &= tdesc_numbered_register (feature, tdesc_data,
- i + MIPS_EMBED_FP0_REGNUM,
- mips_fprs[i]);
+ i + mips_regnum.fp0, mips_fprs[i]);
valid_p &= tdesc_numbered_register (feature, tdesc_data,
- MIPS_EMBED_FP0_REGNUM + 32, "fcsr");
- valid_p &= tdesc_numbered_register (feature, tdesc_data,
- MIPS_EMBED_FP0_REGNUM + 33, "fir");
+ mips_regnum.fp_control_status,
+ "fcsr");
+ valid_p
+ &= tdesc_numbered_register (feature, tdesc_data,
+ mips_regnum.fp_implementation_revision,
+ "fir");
if (!valid_p)
{
return NULL;
}
+ if (dspacc >= 0)
+ {
+ feature = tdesc_find_feature (info.target_desc,
+ "org.gnu.gdb.mips.dsp");
+ /* The DSP registers are optional; it's OK if they are absent. */
+ if (feature != NULL)
+ {
+ i = 0;
+ valid_p = 1;
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ dspacc + i++, "hi1");
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ dspacc + i++, "lo1");
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ dspacc + i++, "hi2");
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ dspacc + i++, "lo2");
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ dspacc + i++, "hi3");
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ dspacc + i++, "lo3");
+
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ dspctl, "dspctl");
+
+ if (!valid_p)
+ {
+ tdesc_data_cleanup (tdesc_data);
+ return NULL;
+ }
+
+ mips_regnum.dspacc = dspacc;
+ mips_regnum.dspctl = dspctl;
+ }
+ }
+
/* It would be nice to detect an attempt to use a 64-bit ABI
when only 32-bit registers are provided. */
+ reg_names = NULL;
}
/* First of all, extract the elf_flags, if available. */
set_gdbarch_elf_make_msymbol_special (gdbarch,
mips_elf_make_msymbol_special);
- /* Fill in the OS dependant register numbers and names. */
- {
- const char **reg_names;
- struct mips_regnum *regnum = GDBARCH_OBSTACK_ZALLOC (gdbarch,
- struct mips_regnum);
- if (tdesc_has_registers (info.target_desc))
- {
- regnum->lo = MIPS_EMBED_LO_REGNUM;
- regnum->hi = MIPS_EMBED_HI_REGNUM;
- regnum->badvaddr = MIPS_EMBED_BADVADDR_REGNUM;
- regnum->cause = MIPS_EMBED_CAUSE_REGNUM;
- regnum->pc = MIPS_EMBED_PC_REGNUM;
- regnum->fp0 = MIPS_EMBED_FP0_REGNUM;
- regnum->fp_control_status = 70;
- regnum->fp_implementation_revision = 71;
- num_regs = MIPS_LAST_EMBED_REGNUM + 1;
- reg_names = NULL;
- }
- else if (info.osabi == GDB_OSABI_IRIX)
- {
- regnum->fp0 = 32;
- regnum->pc = 64;
- regnum->cause = 65;
- regnum->badvaddr = 66;
- regnum->hi = 67;
- regnum->lo = 68;
- regnum->fp_control_status = 69;
- regnum->fp_implementation_revision = 70;
- num_regs = 71;
- reg_names = mips_irix_reg_names;
- }
- else
- {
- regnum->lo = MIPS_EMBED_LO_REGNUM;
- regnum->hi = MIPS_EMBED_HI_REGNUM;
- regnum->badvaddr = MIPS_EMBED_BADVADDR_REGNUM;
- regnum->cause = MIPS_EMBED_CAUSE_REGNUM;
- regnum->pc = MIPS_EMBED_PC_REGNUM;
- regnum->fp0 = MIPS_EMBED_FP0_REGNUM;
- regnum->fp_control_status = 70;
- regnum->fp_implementation_revision = 71;
- num_regs = 90;
- if (info.bfd_arch_info != NULL
- && info.bfd_arch_info->mach == bfd_mach_mips3900)
- reg_names = mips_tx39_reg_names;
- else
- reg_names = mips_generic_reg_names;
- }
- /* FIXME: cagney/2003-11-15: For MIPS, hasn't gdbarch_pc_regnum been
- replaced by gdbarch_read_pc? */
- set_gdbarch_pc_regnum (gdbarch, regnum->pc + num_regs);
- set_gdbarch_sp_regnum (gdbarch, MIPS_SP_REGNUM + num_regs);
- set_gdbarch_fp0_regnum (gdbarch, regnum->fp0);
- set_gdbarch_num_regs (gdbarch, num_regs);
- set_gdbarch_num_pseudo_regs (gdbarch, num_regs);
- set_gdbarch_register_name (gdbarch, mips_register_name);
- set_gdbarch_virtual_frame_pointer (gdbarch, mips_virtual_frame_pointer);
- tdep->mips_processor_reg_names = reg_names;
- tdep->regnum = regnum;
- }
+ regnum = GDBARCH_OBSTACK_ZALLOC (gdbarch, struct mips_regnum);
+ *regnum = mips_regnum;
+ set_gdbarch_fp0_regnum (gdbarch, regnum->fp0);
+ set_gdbarch_num_regs (gdbarch, num_regs);
+ set_gdbarch_num_pseudo_regs (gdbarch, num_regs);
+ set_gdbarch_register_name (gdbarch, mips_register_name);
+ set_gdbarch_virtual_frame_pointer (gdbarch, mips_virtual_frame_pointer);
+ tdep->mips_processor_reg_names = reg_names;
+ tdep->regnum = regnum;
switch (mips_abi)
{
set_gdbarch_skip_trampoline_code (gdbarch, mips_skip_trampoline_code);
+ /* NOTE drow/2012-04-25: We overload the core solib trampoline code
+ to support MIPS16. This is a bad thing. Make sure not to do it
+ if we have an OS ABI that actually supports shared libraries, since
+ shared library support is more important. If we have an OS someday
+ that supports both shared libraries and MIPS16, we'll have to find
+ a better place for these.
+ macro/2012-04-25: But that applies to return trampolines only and
+ currently no MIPS OS ABI uses shared libraries that have them. */
+ set_gdbarch_in_solib_return_trampoline (gdbarch, mips_in_return_stub);
+
set_gdbarch_single_step_through_delay (gdbarch,
mips_single_step_through_delay);
info.tdep_info = (void *) tdesc_data;
gdbarch_init_osabi (info, gdbarch);
+ /* The hook may have adjusted num_regs, fetch the final value and
+ set pc_regnum and sp_regnum now that it has been fixed. */
+ /* FIXME: cagney/2003-11-15: For MIPS, hasn't gdbarch_pc_regnum been
+ replaced by gdbarch_read_pc? */
+ num_regs = gdbarch_num_regs (gdbarch);
+ set_gdbarch_pc_regnum (gdbarch, regnum->pc + num_regs);
+ set_gdbarch_sp_regnum (gdbarch, MIPS_SP_REGNUM + num_regs);
+
/* Unwind the frame. */
dwarf2_append_unwinders (gdbarch);
frame_unwind_append_unwinder (gdbarch, &mips_stub_frame_unwind);
projects / binutils.git / blobdiff