+
+ * config/tc-arm.c (do_t_rbit): Populate both rm fields.
+
+
+ PR 5523
+ * config/tc-avr.c (avr_ldi_expression): Do not warn about unknown
+ relocs here.
+
+
+ * config/tc-mips.c (mips_cpu_info_table): Move records for
+ ST Loongson-2E/2F processors to a better place.
+
+
+ PR gas/6518
+ * config/tc-i386.c (match_template): Report ambiguous operand
+ size, not invalid suffix when there is no match in Intel
+ syntax.
+
+
+ * config/tc-arm.c (parse_cond): Covert to lowercase before matching.
+
+
+ * config/tc-arm.c (arm_cpus): Add Faraday ARMv4 and ARMv5TE
+ compatible cores: fa526, fa626, fa626te, fa726te.
+ * doc/c-arm.texi (ARM Opts): Add -mcpu={fa526, fa626, fa626te,
+ fa726te} options.
+
+
+ * Makefile.am: Run "make dep-am".
+ * Makefile.in: Regenerate.
+ * doc/Makefile.in: Regenerate.
+ * po/POTFILES.in: Regenerate.
+
+
+ * config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs
+ with non-MIPS16 relocs.
+
+
+ * config/tc-mips.c (md_begin): Use strncmp to compare TARGET_OS, in
+ case that some characters append at the end of the name.
+ (mips_ip): Likewise.
+ (s_change_sec): Likewise.
+ (md_section_align): Likewise.
+
+
+ * config/tc-xtensa.c (xtensa_create_property_segments): Use
+ xtensa_make_property_section instead of xtensa_get_property_section.
+ (xtensa_create_xproperty_segments): Likewise.
+
+
+ * NEWS: Mention XSAVE, EPT and MOVBE.
+
+ * config/tc-i386.c (cpu_arch): Add .movbe and .ept.
+ (md_show_usage): Add .movbe and .ept.
+
+ * doc/c-i386.texi: Add movbe and ept to -march=. Document
+ .movbe and .ept.
+
+
+ * config/tc-sparc.c (v9a_asr_table): Fix order of softint entries.
+
+
+ * config/tc-mips.c (file_mips_soft_float, file_mips_single_float):
+ New statics.
+ (OPTION_ELF_BASE): Make room for new option macros.
+ (OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
+ OPTION_DOUBLE_FLOAT): New option macros.
+ (md_longopts): Add msoft-float, mhard-float, msingle-float and
+ mdouble-float.
+ (md_parse_option): Handle OPTION_SINGLE_FLOAT,
+ OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
+ (md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
+ and -mdouble-float.
+ (struct mips_set_options): New fields soft_float and single_float.
+ (mips_opts): Initialized them. Add comment for each field
+ initializer.
+ (mips_after_parse_args): Set them based on file_mips_soft_float
+ and file_mips_single_float.
+ (s_mipsset): Add support for `.set softfloat', `.set hardfloat',
+ `.set singlefloat' and `.set doublefloat'.
+ (is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
+ Handle single-float and soft-float instructions here.
+ (macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
+ (is_opcode_valid_16): New function.
+ (mips16_ip): Use it instead of OPCODE_IS_MEMBER.
+ (macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
+ M_S_DOB>: Remove special-casing of r4650.
+ * doc/c-mips.texi (-march=): Add Octeon.
+ (MIPS Opts): Document -msoft-float and -mhard-float. Document
+ -msingle-float and -mdouble-float.
+ (MIPS floating-point): New section. Document `.set softfloat' and
+ `.set hardfloat'. Document `.set singlefloat' and `.set
+ doublefloat'.
+
+
+ * config/tc-sparc.c: Accept 'softint_clear' and 'softint_set'
+ %asr aliases.
+
+ * doc/c-sparc.texi: Consistently refer to architecture 'versions',
+ rather than occaisionally 'levels'. Consistently refer to Sun's
+ UNIX variant as SunOS, every version of Solaris is also SunOS.
+ Document new 'softint_clear' and 'softint_set' aliases. Clarify
+ which architecture versions support '%dcr', '%cq', and '%gl'. Add
+ section on 32-bit/64-bit opcode translations.
+
+
+ * Makefile.am (OBJ_FORMAT_CFILES): Add config/obj-fdpicelf.c.
+ (OBJ_FORMAT_HFILES): Add config/obj-fdpicelf.h.
+ (obj-fdpicelf.o): Define.
+ * Makefile.in: Regenerate.
+ * configure.tgt: Set bfd_gas to yes when fmt is fdpicelf.
+ (bfin-*-*): Delete.
+ (bfin-*-linux-uclibc): New; set fmt to fdpicelf and em to linux.
+ (bfin-*-uclinux*): New; set fmt to elf and em to linux.
+ * config/obj-fdpicelf.c: New.
+ * config/obj-fdpicelf.h: Likewise.
+ * config/tc-bfin.c (bfin_flags, bfin_pic_flag): Set default based on
+ the OBJ_FDPIC_ELF define.
+ (OPTION_NOPIC): Define.
+ (md_longopts): Add mnopic and mno-fdpic.
+ (md_parse_option): Handle OPTION_NOPIC.
+
+
+ * aclocal.m4: Regenerate.
+ * configure: Regenerate.
+
+
+ * config/tc-sparc.c (v9a_asr_table): Add missing
+ 'stick' and 'stick_cmpr', and document ordering rules
+ of table.
+ (tc_gen_reloc): Accept BFD_RELOC_SPARC_PC22 and
+ BFD_RELOC_SPARC_PC10.
+ * doc/c-sparc.texi: New section on Sparc constants.
+ Add documentation for %stick and %stick_cmpr.
+
+
+ * config/obj-elf.c (obj_elf_section_type): Add prototype
+ before obj_elf_section_word and add 'warn' arg.
+ (obj_elf_section_word): Add type pointer arg, and if no #SECTION
+ is matched, try checking for #SECTION_TYPE.
+ (obj_elf_section): Adjust for new args.
+ (obj_elf_type_name): New function.
+ (obj_elf_type): Call it, and accept STT_foo number strings
+ in .type statements as output by SunPRO compiler.
+
+
+ * config/tc-i386.c (md_assemble): Don't check SSE instructions
+ if noavx is 0.
+
+
+ * doc/c-sparc.texi: Add syntax section.
+
+
+ * config/tc-i386.c (build_modrm_byte): Don't check FMA to swap
+ REG and NDS for instructions with immediate operand.
+
+
+ * config/tc-i386.c (build_modrm_byte): Swap REG and NDS for
+ FMA.
+
+
+ * config/tc-sparc.c (sparc_ip): Add support for gotdata mnemonics
+ and relocation generation.
+ (tc_gen_reloc): Likewise.
+
+
+ * config/tc-sh.c (md_apply_fix): Make sure BFD_RELOC_SH_PCRELIMM8BY4
+ relocations are properly aligned, and not negative.
+
+
+ * doc/tc-arm.texi: Fix fnstart and fnend directive names.
+
+
+ * config/tc-ppc.c (parse_cpu): Handle "e500mc". Extend "e500" to
+ accept e500mc instructions.
+ (md_show_usage): Document -me500mc.
+
+
+ * listing.c (print_timestamp): Use localtime rather than
+ localtime_r since not all build environments provide the latter.
+
+
+ * NEWS: Mention -msse-check=[none|error|warning].
+
+ * config/tc-i386.c (sse_check): New.
+ (OPTION_MSSE_CHECK): Likewise.
+ (md_assemble): Check SSE instructions if needed.
+ (md_longopts): Add -msse-check.
+ (md_parse_option): Handle OPTION_MSSE_CHECK.
+ (md_show_usage): Show -msse-check=[none|error|warning].
+
+ * doc/c-i386.texi: Document -msse-check=[none|error|warning].
+
+
+ * listing.c: Add -ag listing flag to show general information in
+ listings such as gas version, passed options, and time stamp.
+ (listing_general_info): New function.
+ (print_options): New function.
+ (print_single_option): New function.
+ (print_timestamp): New function.
+ (MAX_DATELEN): Define.
+ (listing_print): Add call to listing_general_info.
+ * listing.h (LISTING_GENERAL): Define.
+ (listing_print): Add new parameter.
+ * as.c (show_usage): Print new switch.
+ (parse_args): Parse new switch.
+ (main): Pass command line on to listing_print.
+ * NEWS: Mention this new feature.
+ * doc/as.texinfo: Document the new sub-option.
+
+
+ * dwarf2dbg.c (dwarf2_emit_insn): Simplify test before dwarf2_where
+ call. Delete out of date comment.
+ (dwarf2_consume_line_info): Always clear dwarf2_loc_directive_seen.
+ (dwarf2_emit_label): Don't emit unless there has been a previous
+ .file or we are outputting assembler generated debug.
+ dwarf2_consume_line_info after emitting line info, not before.
+ (out_debug_info): Simplify files_in_use test.
+
+
+ * config/tc-i386.c (parse_real_register): Return AVX register
+ only if AVX is enabled.
+
+
+ PR gas/6043
+ * config/tc-sh64.c (shmedia_md_pcrel_from_section): Use
+ md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL.
+
+
+ * config/tc-xtensa.c (xg_apply_fix_value): Check return code from
+ call to decode_reloc.
+
+
+ * NEWS: Mention XSAVE. Change CLMUL to PCLMUL.
+
+ * config/tc-i386.c (cpu_arch): Add .pclmul.
+ (md_show_usage): Replace clmul with pclmul.
+ * doc/c-i386.texi: Likewise.
+
+
+ * NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx.
+
+ * doc/c-i386.texi: Add avx, aes, clmul and fma to -march=.
+ Document -msse2avx, .avx, .aes, .clmul and .fma.
+
+ * config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New.
+ (vex_prefix): Likewise.
+ (sse2avx): Likewise.
+ (CPU_FLAGS_ARCH_MATCH): Likewise.
+ (CPU_FLAGS_64BIT_MATCH): Likewise.
+ (CPU_FLAGS_32BIT_MATCH): Likewise.
+ (CPU_FLAGS_PERFECT_MATCH): Likewise.
+ (regymm): Likewise.
+ (vex_imm4): Likewise.
+ (fits_in_imm4): Likewise.
+ (build_vex_prefix): Likewise.
+ (VEX_check_operands): Likewise.
+ (bad_implicit_operand): Likewise.
+ (OPTION_MSSE2AVX): Likewise.
+ (T_YMMWORD): Likewise.
+ (_i386_insn): Add vex.
+ (cpu_arch): Add .avx, .aes, .clmul and .fma.
+ (cpu_flags_match): Changed to take a pointer to const template.
+ Enable encoding SSE instructions with VEX prefix for -msse2avx.
+ (match_mem_size): Also check ymmword.
+ (operand_type_match): Clear ymmword.
+ (md_begin): Allow '_' in mnemonic.
+ (type_names): Add OPERAND_TYPE_VEX_IMM4.
+ (process_immext): Update assert.
+ (md_assemble): Don't call process_immext if sse2avx and immext
+ are true. Call build_vex_prefix if vex is true.
+ (parse_insn): Updated for cpu_flags_match.
+ (swap_operands): Handle 5 operands.
+ (match_template): Handle 5 operands. Updated for cpu_flags_match.
+ Check regymm. Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX.
+ (process_suffix): Handle YMMWORD_MNEM_SUFFIX.
+ (check_byte_reg): Check regymm.
+ (process_operands): Duplicate the destination register for
+ -msse2avx if needed.
+ (build_modrm_byte): Updated for instructions with VEX encoding.
+ (output_insn): Output VEX prefix if needed.
+ (md_longopts): Add msse2avx.
+ (md_parse_option): Handle OPTION_MSSE2AVX.
+ (md_show_usage): Add avx, aes, clmul, fma and -msse2avx.
+ (intel_e09): Support YMMWORD.
+ (intel_e11): Likewise.
+ (intel_get_token): Likewise.
+
+
+ * config/tc-avr.c (mcu_types): Add attiny167.
+ * doc/c-avr.texi: Likewise.
+
+
+ * config/tc-avr.c (mcu_types): Add atmega32u4.
+ * doc/c-avr.texi: Likewise.
+
+
+ * config/tc-avr.c (mcu_types): Add atmega32c1.
+ * doc/c-avr.texi: Likewise.
+
+
+ * config/tc-arm.c (parse_neon_mov): Parse register before immediate
+ to avoid spurious symbols.
+
+
+ * config/tc-m68k.c (md_convert_frag_1): Replace as_fatal with
+ as_bad_where.
+
+
+ * config/tc-avr.c (mcu_types): Add atmega32m1.
+ * doc/c-avr.texi: Likewise.
+
+
+ * config/tc-arm.c (do_neon_cvt): Move variable declarations to
+ start of block.
+ (do_neon_ext): Fix sign of comparison.
+
instructions. And call yyerror when comparing PREG with
DREG.
(check_macfunc_option): New.
- (check_macfuncs): Check option by calling check_macfunc_option.
+ (check_macfuncs): Check option by calling check_macfunc_option.
Fix comparison always true warnings. Both scalar instructions
of vector instruction must share the same mode option. Only allow
option mode at the end of the second instruction of the vector.
- (asm_1): Check option by calling check_macfunc_option.
+ (asm_1): Check option by calling check_macfunc_option.
+
+ * config/bfin-parse.y (check_macfunc_option): Allow (IU)
+ option for multiply and multiply-accumulate to data register
+ instruction.
+ (check_macfuncs): Don't check if accumulator matches the data register
+ here.
+ (assign_macfunc): Check if accumulator matches the
+ data register in each rule that moves to the data
+ register.
+
+ * config/tc-bfin.c (bfin_start_line_hook): Localize the labels
+ generated for LOOP_BEGIN and LOOP_END instructions.
+ (bfin_gen_loop): Likewise.
* config/tc-hppa.c (is_same_frag): Delete.
-
+
* config/tc-xtensa.h (xtensa_relax_statesE): Update comment for
RELAX_LOOP_END_ADD_NOP.
-
+
PR gas/5895
-
+
* config/tc-xtensa.c (xtensa_num_pipe_stages): New.
(md_begin): Initialize it.
(resources_conflict): Use it.
-
+
-
+
* config/tc-xtensa.h (RELAX_XTENSA_NONE): New.
-
+
(process_immext): New.
(md_assemble): Use it.
(update_imm): Use imm16 and imm32s.
- (i386_att_operand): Use inoutportreg.
+ (i386_att_operand): Use inoutportreg.
* config/tc-i386.c (set_cpu_arch, md_parse_option): Likewise.
-
+
* config/tc-xtensa.c (relax_frag_immed): Change internal consistency
checks into assertions. When relaxation produces an operation that
does not fit in the current FLIX instruction, make sure that the
operation is relaxed as needed to account for being placed following
the current instruction.
-
+
PR 5715
- * read.c: (emit_expr): Correct for mingw use of printf size
+ * read.c: (emit_expr): Correct for mingw use of printf size
specifier.
-
+
* doc/c-xtensa.texi (Xtensa Syntax): Clarify handling of opcodes that
can only be encoded in FLIX instructions but are not specified as such.
(Xtensa Automatic Alignment): Remove obsolete comment about debugging
labels.
-
+
* NEWS: Mention new command line options for x86 targets.
* doc/c-i386.texi: Update -march= for ISA.
-
+
* config/tc-xtensa.c (xtensa_leb128): New function.
(md_pseudo_table): Use it for sleb128 and uleb128.
(is_leb128_expr): New internal flag.
(xtensa_symbol_new_hook): Check new flag.
-
+
* config/tc-avr.c (mcu_types): Change opcode set for avr3,
at90usb82, at90usb162.
- * doc/c-avr.texi: Change architecture grouping for at90usb82,
+ * doc/c-avr.texi: Change architecture grouping for at90usb82,
at90usb162.
These changes support the new avr35 architecture group in gcc.
unwind personality function address.
-
+
* dwarf2dbg.c (out_sleb128): Delete.
(size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New.
(out_fixed_inc_line_addr): Delete.
* read.h (emit_expr_fix): New prototype.
* read.c (emit_expr): Move code to emit_expr_fix and use it here.
(emit_expr_fix): New.
-
+
* config/tc-i386.c (match_template): Check register size
projects / binutils.git / blobdiff