+
+ * Makefile.in (TARGET_FLAGS_TO_PASS): Fix syntax of
+ sanitize-chill comments.
+
+
+ * Revert the previous changes. Please see Rob's directory
+ /lisa/test/rob/progressive/gdb/testsuite for these fixes.
+
+
+ * Makefile.in, configure.in, config/mips-gdb.exp,
+ config/mt-a29k-udi, config/mt-i386-aout, config/mt-i960-nindy,
+ config/mt-sparc-aout, config/udi-gdb.exp, config/unix-gdb.exp,
+ config/unknown.exp, gdb.t00/default.exp, gdb.t00/help.exp,,
+ gdb.t00/teststrategy.exp, gdb.t01/Makefile.in, gdb.t02/Makefile.in,
+ gdb.t02/whatis.exp, gdb.t03/Makefile.in, gdb.t03/gdbme.c,
+ gdb.t04/Makefile.in, gdb.t05/Makefile.in, gdb.t06/Makefile.in,
+ gdb.t06/break.exp, gdb.t06/signals.c, gdb.t06/signals.exp,
+ gdb.t08/Makefile.in, gdb.t08/opaque.exp, gdb.t09/Makefile.in,
+ gdb.t10/Makefile.in, gdb.t11/Makefile.in, gdb.t12/Makefile.in,
+ gdb.t13/Makefile.in, gdb.t15/Makefile.in, gdb.t15/funcargs.exp,
+ gdb.t15/gdbme.c, gdb.t15/return.exp, gdb.t16/Makefile.in,
+ gdb.t17/Makefile.in, gdb.t17/callfuncs.exp, gdb.t17/gdbme.c,
+ gdb.t20/Makefile.in, gdb.t21/Makefile.in, gdb.t21/cplusfuncs.exp,
+ gdb.t22/Makefile.in, gdb.t22/virtfunc.exp, gdb.t23/Makefile.in,
+ gdb.t24/demangle.exp, lib/gdb.exp: Check in Rob's testing
+ changes from 94Q1.
+
+
+ * config/mt-lynx, config/mt-m68k, config/mt-mips-ecoff,
+ config/mt-slite, config/mt-unix, config/mt-vxworks: Add
+ Rob's new testing fragments.
+
+
+ * config/mips-gdb.exp, config/udi-gdb.exp, config/vx-gdb.exp,
+ lib/gdb.exp: Replace error proc calls with perror.
+
+
+ * gdb.t00/teststrategy.exp: Reorder so that AIX gdb can print the
+ version also, match on casted version strings, and match on
+ gdb startup case where the line numbers might be messed up.
+
+
+ * config/mt-i960-vx (LDFLAGS): Add '-r' option for test links.
+ (CFLAGS): Delete it from here.
+
+
+ * .Sanitize: Drop the gdb.t30 and gdb.t31 directories
+ unless keep-chill was specified on the command line.
+ * Makefile.in, config/makefile.rel.in: : Add comment lines
+ to Sanitize out CHILL references unless keep-chill
+ was specified.
+
+
+ * gdb.t22/virtfunc.exp: Fix g++ ptype expected outputs.
+
+
+ * Makefile.in (RUNTEST): Default to just "runtest".
+
+
+ * gdb.t17/callfuncs.exp: More comments about t_func_values tests.
+ * gdb.t17/gdbme.c (t_func_values): Add comments about how and why
+ the code has been restructured.
+
+
+ * gdb.t00/default.exp (set write): Allow any number of \r and/or
+ \n, not just one of each.
+
+ * gdb.t07/gdbme.c (main): Don't take address of an array; SunOS4
+ /bin/cc gives a warning if you do.
+
+
+ * gdb.t24/demangle.exp: change expect pattern of
+ __t10ListS_link1ZUiRCUiPT0
+
+
+ * gdb.t07/{recurse.exp, recurse.c}: New tests for watchpoints
+ on local variables in recursive functions.
+
+ * gdb.t07/Makefile.in: Build the new test.
+
+
+ * gdb.t17/gdbme.c (t_func_values): Do not compare function pointers
+ directly. Instead compare the return values from actual calls.
+
+
+ * Makefile.in (check): Set TCL_LIBRARY for runtest.
+
+
+ * From Peter Schauer with minor modifications.
+ * gdb.t15/return.exp (return_tests): Handle targets where "return"
+ stops in mid-line in the caller. Add xfail for returning a float
+ value on X86 targets.
+
+
+ * gdb.disasm/hppa.exp (fcmp_tests): Break up into two halves
+ to avoid expect lossage.
+ (fmem_LRbug_tests): Likewise.
+ * gdb.disasm/hppa.s: Corresponding changes.
+
+ * gdb.disasm/hppa.exp: Rework escape sequences and end-of-line
+ conditions to work with latest dejagnu/expect.
+
+ * gdb.t15/funcargs.exp (finish from indirect call): No longer
+ expected to fail on the PA.
+ (backtrace in call with trampolines): Explicitly require main
+ to be frame #1 (no trampolines should show up in backtrace).
+
+ * gdb.t00/default.exp: Use "exp_continue" rather than obsolete
+ "continue -expect".
+ * gdb.t06/break.exp: Likewise.
+ * gdb.t07/watchpoint.exp: Likewise.
+ * gdb.t13/bitfields.exp: Likewise.
+ * gdb.t15/{funcargs,return}.exp: Likewise.
+ * gdb.stabs/weird.exp: Likewise.
+ * config/{mips,udi}-gdb.exp: Likewise.
+
+ * hppa.sed: Enclose comments within a sed command to avoid
+ losing with the old OSF1 sed.
+
+
+ * gdb.t02/whatis.exp, gdb.t08/opaque.exp: Add XFAILs for
+ sequent dynix.
+ * gdb.t06/signals.exp: Add clear_xfail for sequent dynix.
+ * gdb.t15/funcargs.exp: Conditionally step again to really
+ finish from marker_call_with_trampolines. Handle the case where
+ the first step from within call_with_trampolines already steps
+ us back to main.
+ * gdb.t15/gdbme.c: Add comment to closing brace of
+ call_with_trampolines for funcargs.exp.
+
+
+ * gdb.t07/watchpoint.exp (test_watchpoint_triggered_in_syscall):
+ Fix typo(s).
+
+
+ * gdb.t07/gdbme.c: More code for watchpoint testing.
+
+ * gdb.t07/watchpoint.exp: Accept both "Watchpoint" and
+ "Hardware watchpoint" throughout file.
+ (test_watchpoint_triggered_in_syscall): New test.
+ (test_complex_watchpoint): New test.
+
+
+ * gdbme.c (call_with_trampolines): New function to try and step
+ into. Tests trampoline problems on the PA.
+
+ * funcargs.exp (localvars_in_indirect_call): No longer expect
+ stepping into indirect call to fail on PAs.
+ (test_stepping_over_trampolines): New test.
+
+
+ * TODO: Add suggestions for static member function tests, and
+ completion tests.
+
+
+ * TODO: Add suggestions for "p/a" tests.
+
+ * lib/gdb.exp: Set prompt to (gdb) if it isn't already set.
+ (default_gdb_exit): Replace all the hair with sending "quit" to
+ the process with a simple close.
+
+
+ * TODO: Add suggestions for shared library tests.
+
+
+ * TODO: Add suggestions for x/s tests.
+
+
+ * gdb.t00/help.exp: Replace most of docstrings for "tbreak",
+ "enable once", and "enable breakpoints once" with ".*".
+
+
+ * TODO: Add suggestions about structure passing tests.
+
+
+ * gdb.t03/gdbme.c: gcc version 1 puts out the wrong stabs for
+ the primary1 test, use work around if __GNUC__ < 2.
+ * gdb.t06/signals.c: Add comments for signals.exp pattern matching.
+ * gdb.t06/signals.exp: Add XFAILs for i386 bsd and vax ultrix.
+ Test for bad output rather than waiting for timeout. Issue
+ second continue only if first continue failed.
+
+
+ * gdb.t21/cplusfuncs.exp (test_paddr_operator_functions): Do
+ operator[] test with gdb_test because the old code didn't seem to
+ be getting the quoting right with the new dejagnu.
+
+
+ * lib/gdb.exp: Set GDB to a fresh gdb if there is one, else use
+ one from the path.
+ * Makefile.in: Use a fresh expect if there is one, use runtest
+ from the src tree if there is one.
+
+
+ * gdb.t06/break.exp (test_next_with_recursion): Remove xfail for
+ next over recursive call. Revise the tests from that point on
+ (which had been skipped) to match GDB's actual (correct) output.
+
+ * gdb.t07/watchpoint.exp (test_stepping): Remove xfail for bug
+ with next over a breakpoint whose condition is false.
+
+ * gdb.t00/help.exp: Comment out "help set print" tests just like
+ (and for same reason as) "help set" test.
+
+
+ * gdb.disasm/hppa.s (fmemLRbug_tests): New tests.
+ * gdb.disasm/hppa.exp (fmemLRbug_tests): Run them.
+
+ * gdb.t06/break.exp (test_next_with_recursion): Remove no longer
+ necessary gdb_target_udi.
+
+ * gdb.t03/ptype.exp: For UDI, skip tests which call malloc.
+
+ * gdb.t02/whatis.exp, gdb.t03/ptype.exp: Remove xfails for PRs
+ 1838 and 2417; they are fixed.
+
+ * gdb.t02/whatis.exp (v_char_array, v_signed_char_array),
+ gdb.t03/ptype.exp (ptype structure, ptype union):
+ Remove xfails; the test is looser than when the xfails were added.
+
+ * gdb.t00/{help.exp,default.exp}: Don't test "target remote" on UDI.
+ * gdb.t00/help.exp: Don't expect remote to be in "help target" output.
+
* gdb.t01/run.exp: Only run shell test if isnative.
* config/udi-gdb.exp (gdb_load): Use "file", not "load" command,
- since "run" automatically loads if necessary.
+ since "run" automatically loads if necessary. Call gdb_target_udi
+ after the "file" since "file" kills any execution target.
* config/udi-gdb.exp (gdb_start): Don't send "set args main" to
GDB. GDB doesn't work that way (not anymore at least) on UDI.
- * gdb.t01/run.exp: Don't pass extra first argument for UDI.
+ * gdb.t01/run.exp, gdb.t06/break.exp: Don't pass extra first
+ argument for UDI.
projects / binutils.git / blobdiff