/* Generic BFD library interface and support routines.
- Copyright (C) 1990-1991 Free Software Foundation, Inc.
+ Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
Written by Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* $Id$ */
-
-/*proto*
-@section @code{typedef bfd}
-
-A BFD is has type @code{bfd}; objects of this type are the cornerstone
-of any application using @code{libbfd}. References though the BFD and
-to data in the BFD give the entire BFD functionality.
-
-Here is the struct used to define the type @code{bfd}. This contains
-the major data about the file, and contains pointers to the rest of
-the data.
-
-*+++
-
-$struct _bfd
-${
- The filename the application opened the BFD with.
-
-$ CONST char *filename;
-
-A pointer to the target jump table.
-
-$ struct bfd_target *xvec;
-
-
-To avoid dragging too many header files into every file that
-includes @file{bfd.h}, IOSTREAM has been declared as a "char *", and MTIME
-as a "long". Their correct types, to which they are cast when used,
-are "FILE *" and "time_t".
-
-The iostream is the result of an fopen on the filename.
-
-$ char *iostream;
-
-Is the file being cached @xref{File Caching}.
-
-$ boolean cacheable;
-
-Marks whether there was a default target specified when the BFD was
-opened. This is used to select what matching algorithm to use to chose
-the back end.
-
-$ boolean target_defaulted;
-
-The caching routines use these to maintain a least-recently-used list of
-BFDs (@pxref{File Caching}).
-
-$ struct _bfd *lru_prev, *lru_next;
-
-When a file is closed by the caching routines, BFD retains state
-information on the file here:
-
-$ file_ptr where;
-
-and here:
-
-$ boolean opened_once;
-
-$ boolean mtime_set;
-File modified time
-
-$ long mtime;
-
-Reserved for an unimplemented file locking extension.
-
-$int ifd;
-
-The format which belongs to the BFD.
-
-$ bfd_format format;
-
-The direction the BFD was opened with
-
-$ enum bfd_direction {no_direction = 0,
-$ read_direction = 1,
-$ write_direction = 2,
-$ both_direction = 3} direction;
-
-Format_specific flags
-
-$ flagword flags;
-
-Currently my_archive is tested before adding origin to anything. I
-believe that this can become always an add of origin, with origin set
-to 0 for non archive files.
-
-$ file_ptr origin;
-
-Remember when output has begun, to stop strange things happening.
-
-$ boolean output_has_begun;
-
-Pointer to linked list of sections
-
-$ struct sec *sections;
-
-The number of sections
-
-$ unsigned int section_count;
-
-Stuff only useful for object files:
-The start address.
-
-$ bfd_vma start_address;
-Used for input and output
-
-$ unsigned int symcount;
-Symbol table for output BFD
-
-$ struct symbol_cache_entry **outsymbols;
-
-Architecture of object machine, eg m68k
-
-$ enum bfd_architecture obj_arch;
-
-Particular machine within arch, e.g. 68010
-
-$ unsigned long obj_machine;
-
-Stuff only useful for archives:
-
-$ PTR arelt_data;
-$ struct _bfd *my_archive;
-$ struct _bfd *next;
-$ struct _bfd *archive_head;
-$ boolean has_armap;
-
-Used by the back end to hold private data.
-
-$ PTR tdata;
-
-Used by the application to hold private data
-
-$ PTR usrdata;
-
-Where all the allocated stuff under this BFD goes (@pxref{Memory Usage}).
-
-$ struct obstack memory;
-$};
-
-*---
-
+/*
+SECTION
+ <<typedef bfd>>
+
+ A BFD is has type <<bfd>>; objects of this type are the
+ cornerstone of any application using <<libbfd>>. References
+ though the BFD and to data in the BFD give the entire BFD
+ functionality.
+
+ Here is the struct used to define the type <<bfd>>. This
+ contains the major data about the file, and contains pointers
+ to the rest of the data.
+
+CODE_FRAGMENT
+.
+.struct _bfd
+.{
+. {* The filename the application opened the BFD with. *}
+. CONST char *filename;
+.
+. {* A pointer to the target jump table. *}
+. struct bfd_target *xvec;
+.
+. {* To avoid dragging too many header files into every file that
+. includes `<<bfd.h>>', IOSTREAM has been declared as a "char
+. *", and MTIME as a "long". Their correct types, to which they
+. are cast when used, are "FILE *" and "time_t". The iostream
+. is the result of an fopen on the filename. *}
+. char *iostream;
+.
+. {* Is the file being cached *}
+.
+. boolean cacheable;
+.
+. {* Marks whether there was a default target specified when the
+. BFD was opened. This is used to select what matching algorithm
+. to use to chose the back end. *}
+.
+. boolean target_defaulted;
+.
+. {* The caching routines use these to maintain a
+. least-recently-used list of BFDs *}
+.
+. struct _bfd *lru_prev, *lru_next;
+.
+. {* When a file is closed by the caching routines, BFD retains
+. state information on the file here:
+. *}
+.
+. file_ptr where;
+.
+. {* and here:*}
+.
+. boolean opened_once;
+.
+. {* Set if we have a locally maintained mtime value, rather than
+. getting it from the file each time: *}
+.
+. boolean mtime_set;
+.
+. {* File modified time, if mtime_set is true: *}
+.
+. long mtime;
+.
+. {* Reserved for an unimplemented file locking extension.*}
+.
+. int ifd;
+.
+. {* The format which belongs to the BFD.*}
+.
+. bfd_format format;
+.
+. {* The direction the BFD was opened with*}
+.
+. enum bfd_direction {no_direction = 0,
+. read_direction = 1,
+. write_direction = 2,
+. both_direction = 3} direction;
+.
+. {* Format_specific flags*}
+.
+. flagword flags;
+.
+. {* Currently my_archive is tested before adding origin to
+. anything. I believe that this can become always an add of
+. origin, with origin set to 0 for non archive files. *}
+.
+. file_ptr origin;
+.
+. {* Remember when output has begun, to stop strange things
+. happening. *}
+. boolean output_has_begun;
+.
+. {* Pointer to linked list of sections*}
+. struct sec *sections;
+.
+. {* The number of sections *}
+. unsigned int section_count;
+.
+. {* Stuff only useful for object files:
+. The start address. *}
+. bfd_vma start_address;
+.
+. {* Used for input and output*}
+. unsigned int symcount;
+.
+. {* Symbol table for output BFD*}
+. struct symbol_cache_entry **outsymbols;
+.
+. {* Pointer to structure which contains architecture information*}
+. struct bfd_arch_info *arch_info;
+.
+. {* Stuff only useful for archives:*}
+. PTR arelt_data;
+. struct _bfd *my_archive;
+. struct _bfd *next;
+. struct _bfd *archive_head;
+. boolean has_armap;
+.
+. {* Used by the back end to hold private data. *}
+.
+. union
+. {
+. struct aout_data_struct *aout_data;
+. struct artdata *aout_ar_data;
+. struct _oasys_data *oasys_obj_data;
+. struct _oasys_ar_data *oasys_ar_data;
+. struct coff_tdata *coff_obj_data;
+. struct ecoff_tdata *ecoff_obj_data;
+. struct ieee_data_struct *ieee_data;
+. struct ieee_ar_data_struct *ieee_ar_data;
+. struct srec_data_struct *srec_data;
+. struct tekhex_data_struct *tekhex_data;
+. struct elf_obj_tdata *elf_obj_data;
+. struct bout_data_struct *bout_data;
+. struct sun_core_struct *sun_core_data;
+. struct trad_core_struct *trad_core_data;
+. struct hppa_data_struct *hppa_data;
+. struct hppa_core_struct *hppa_core_data;
+. PTR any;
+. } tdata;
+.
+. {* Used by the application to hold private data*}
+. PTR usrdata;
+.
+. {* Where all the allocated stuff under this BFD goes *}
+. struct obstack memory;
+.
+. {* Is this really needed in addition to usrdata? *}
+. asymbol **ld_symbols;
+.};
+.
*/
-#include <sysdep.h>
+
#include "bfd.h"
+#include "sysdep.h"
#include "libbfd.h"
+#include "coff/sym.h"
+#include "libecoff.h"
+
+#undef strerror
+extern char *strerror();
-short _bfd_host_big_endian = 0x0100;
+CONST short _bfd_host_big_endian = 0x0100;
/* Accessing the above as (*(char*)&_bfd_host_big_endian), will
return 1 if the host is big-endian, 0 otherwise.
(assuming that a short is two bytes long!!! FIXME)
bfd_ec bfd_error = no_error;
-char *bfd_errmsgs[] = { "No error",
+CONST char *CONST bfd_errmsgs[] = {
+ "No error",
"System call error",
"Invalid target",
"File in wrong format",
"File format is ambiguous",
"Section has no contents",
"Nonrepresentable section on output",
+ "Symbol needs debug section which does not exist",
+ "Bad value",
+ "File truncated",
"#<Invalid error code>"
};
exit(1);
}
+/*ARGSUSED*/
+static
+void
+DEFUN(bfd_undefined_symbol,(relent, seclet),
+ CONST arelent *relent AND
+ CONST struct bfd_seclet *seclet)
+{
+ asymbol *symbol = *(relent->sym_ptr_ptr);
+ printf("bfd error relocating, symbol %s is undefined\n",
+ symbol->name);
+ exit(1);
+}
+/*ARGSUSED*/
+static
+void
+DEFUN(bfd_reloc_value_truncated,(relent, seclet),
+ CONST arelent *relent AND
+ struct bfd_seclet *seclet)
+{
+ printf("bfd error relocating, value truncated\n");
+ exit(1);
+}
+/*ARGSUSED*/
+static
+void
+DEFUN(bfd_reloc_is_dangerous,(relent, seclet),
+ CONST arelent *relent AND
+ CONST struct bfd_seclet *seclet)
+{
+ printf("bfd error relocating, dangerous\n");
+ exit(1);
+}
+
bfd_error_vector_type bfd_error_vector =
{
- bfd_nonrepresentable_section
+ bfd_nonrepresentable_section ,
+ bfd_undefined_symbol,
+ bfd_reloc_value_truncated,
+ bfd_reloc_is_dangerous,
};
-#if !defined(ANSI_LIBRARIES) && !defined(__STDC__) || HOST_SYS==SUN4_SYS
-char *
-strerror (code)
- int code;
-{
- extern int sys_nerr;
- extern char *sys_errlist[];
- return (((code < 0) || (code >= sys_nerr)) ? "(unknown error)" :
- sys_errlist [code]);
-}
-#endif /* not ANSI_LIBRARIES */
-
-
-char *
+CONST char *
bfd_errmsg (error_tag)
bfd_ec error_tag;
{
\f
/** Symbols */
-/* returns the number of octets of storage required */
+
+/*
+FUNCTION
+ bfd_get_reloc_upper_bound
+
+SYNOPSIS
+ unsigned int bfd_get_reloc_upper_bound(bfd *abfd, asection *sect);
+
+DESCRIPTION
+ This function return the number of bytes required to store the
+ relocation information associated with section <<sect>>
+ attached to bfd <<abfd>>
+
+*/
+
unsigned int
-get_reloc_upper_bound (abfd, asect)
- bfd *abfd;
- sec_ptr asect;
+DEFUN(bfd_get_reloc_upper_bound,(abfd, asect),
+ bfd *abfd AND
+ sec_ptr asect)
{
if (abfd->format != bfd_object) {
bfd_error = invalid_operation;
return BFD_SEND (abfd, _get_reloc_upper_bound, (abfd, asect));
}
+/*
+FUNCTION
+ bfd_canonicalize_reloc
+
+SYNOPSIS
+ unsigned int bfd_canonicalize_reloc
+ (bfd *abfd,
+ asection *sec,
+ arelent **loc,
+ asymbol **syms);
+
+DESCRIPTION
+ This function calls the back end associated with the open
+ <<abfd>> and translates the external form of the relocation
+ information attached to <<sec>> into the internal canonical
+ form. The table is placed into memory at <<loc>>, which has
+ been preallocated, usually by a call to
+ <<bfd_get_reloc_upper_bound>>.
+
+ The <<syms>> table is also needed for horrible internal magic
+ reasons.
+
+
+*/
unsigned int
-bfd_canonicalize_reloc (abfd, asect, location, symbols)
- bfd *abfd;
- sec_ptr asect;
- arelent **location;
- asymbol **symbols;
+DEFUN(bfd_canonicalize_reloc,(abfd, asect, location, symbols),
+ bfd *abfd AND
+ sec_ptr asect AND
+ arelent **location AND
+ asymbol **symbols)
{
- if (abfd->format != bfd_object) {
- bfd_error = invalid_operation;
- return 0;
+ if (abfd->format != bfd_object) {
+ bfd_error = invalid_operation;
+ return 0;
+ }
+ return BFD_SEND (abfd, _bfd_canonicalize_reloc,
+ (abfd, asect, location, symbols));
}
- return BFD_SEND (abfd, _bfd_canonicalize_reloc, (abfd, asect, location, symbols));
-}
+/*
+FUNCTION
+ bfd_set_file_flags
+
+SYNOPSIS
+ boolean bfd_set_file_flags(bfd *abfd, flagword flags);
+
+DESCRIPTION
+ This function attempts to set the flag word in the referenced
+ BFD structure to the value supplied.
+
+ Possible errors are:
+ o wrong_format - The target bfd was not of object format.
+ o invalid_operation - The target bfd was open for reading.
+ o invalid_operation -
+ The flag word contained a bit which was not applicable to the
+ type of file. eg, an attempt was made to set the D_PAGED bit
+ on a bfd format which does not support demand paging
+
+*/
boolean
bfd_set_file_flags (abfd, flags)
return false;
}
+ bfd_get_file_flags (abfd) = flags;
if ((flags & bfd_applicable_file_flags (abfd)) != flags) {
bfd_error = invalid_operation;
return false;
}
- bfd_get_file_flags (abfd) = flags;
return true;
}
+/*
+FUNCTION
+ bfd_set_reloc
+
+SYNOPSIS
+ void bfd_set_reloc
+ (bfd *abfd, asection *sec, arelent **rel, unsigned int count)
+DESCRIPTION
+ This function sets the relocation pointer and count within a
+ section to the supplied values.
+
+*/
+/*ARGSUSED*/
void
bfd_set_reloc (ignore_abfd, asect, location, count)
bfd *ignore_abfd;
}
-/*proto* bfd_set_start_address
+/*
+FUNCTION
+ bfd_set_start_address
-Marks the entry point of an output BFD. Returns @code{true} on
-success, @code{false} otherwise.
+DESCRIPTION
+ Marks the entry point of an output BFD.
-*; PROTO(boolean, bfd_set_start_address,(bfd *, bfd_vma));
+RETURNS
+ Returns <<true>> on success, <<false>> otherwise.
+
+SYNOPSIS
+ boolean bfd_set_start_address(bfd *, bfd_vma);
*/
boolean
}
-/*proto* bfd_get_mtime
+/*
+FUNCTION
+ The bfd_get_mtime function
-Return cached file modification time (e.g. as read from archive header
-for archive members, or from file system if we have been called
-before); else determine modify time, cache it, and return it.
+SYNOPSIS
+ long bfd_get_mtime(bfd *);
-*; PROTO(long, bfd_get_mtime, (bfd *));
+DESCRIPTION
+ Return file modification time (as read from file system, or
+ from archive header for archive members).
*/
if (0 != fstat (fileno (fp), &buf))
return 0;
- abfd->mtime_set = true;
- abfd->mtime = buf.st_mtime;
- return abfd->mtime;
+ abfd->mtime = buf.st_mtime; /* Save value in case anyone wants it */
+ return buf.st_mtime;
}
-/*proto* stuff
-
-*+
+/*
+FUNCTION
+ The bfd_get_size function
+
+SYNOPSIS
+ long bfd_get_size(bfd *);
+
+DESCRIPTION
+ Return file size (as read from file system) for the file
+ associated with a bfd.
+
+ Note that the initial motivation for, and use of, this routine is not
+ so we can get the exact size of the object the bfd applies to, since
+ that might not be generally possible (archive members for example?).
+ Although it would be ideal if someone could eventually modify
+ it so that such results were guaranteed.
+
+ Instead, we want to ask questions like "is this NNN byte sized
+ object I'm about to try read from file offset YYY reasonable?"
+ As as example of where we might want to do this, some object formats
+ use string tables for which the first sizeof(long) bytes of the table
+ contain the size of the table itself, including the size bytes.
+ If an application tries to read what it thinks is one of these
+ string tables, without some way to validate the size, and for
+ some reason the size is wrong (byte swapping error, wrong location
+ for the string table, etc), the only clue is likely to be a read
+ error when it tries to read the table, or a "virtual memory
+ exhausted" error when it tries to allocated 15 bazillon bytes
+ of space for the 15 bazillon byte table it is about to read.
+ This function at least allows us to answer the quesion, "is the
+ size reasonable?".
+*/
-#define bfd_sizeof_headers(abfd, reloc) \
- BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc))
+long
+bfd_get_size (abfd)
+ bfd *abfd;
+{
+ FILE *fp;
+ struct stat buf;
-#define bfd_find_nearest_line(abfd, section, symbols, offset, filename_ptr, func, line_ptr) \
- BFD_SEND (abfd, _bfd_find_nearest_line, (abfd, section, symbols, offset, filename_ptr, func, line_ptr))
+ fp = bfd_cache_lookup (abfd);
+ if (0 != fstat (fileno (fp), &buf))
+ return 0;
-#define bfd_debug_info_start(abfd) \
- BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
+ return buf.st_size;
+}
-#define bfd_debug_info_end(abfd) \
- BFD_SEND (abfd, _bfd_debug_info_end, (abfd))
+/*
+FUNCTION
+ The bfd_get_gp_size function
-#define bfd_debug_info_accumulate(abfd, section) \
- BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section))
+SYNOPSIS
+ int bfd_get_gp_size(bfd *);
-#define bfd_stat_arch_elt(abfd, stat) \
- BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
+DESCRIPTION
+ Get the maximum size of objects to be optimized using the GP
+ register under MIPS ECOFF. This is typically set by the -G
+ argument to the compiler, assembler or linker.
+*/
-#define bfd_coff_swap_aux_in(a,e,t,c,i) \
- BFD_SEND (a, _bfd_coff_swap_aux_in, (a,e,t,c,i))
+int
+bfd_get_gp_size (abfd)
+ bfd *abfd;
+{
+ if (abfd->xvec->flavour == bfd_target_ecoff_flavour)
+ return ecoff_data (abfd)->gp_size;
+ return 0;
+}
-#define bfd_coff_swap_sym_in(a,e,i) \
- BFD_SEND (a, _bfd_coff_swap_sym_in, (a,e,i))
+/*
+FUNCTION
+ The bfd_set_gp_size function
-#define bfd_coff_swap_lineno_in(a,e,i) \
- BFD_SEND ( a, _bfd_coff_swap_lineno_in, (a,e,i))
-*-
+SYNOPSIS
+ void bfd_set_gp_size(bfd *, int);
+DESCRIPTION
+ Set the maximum size of objects to be optimized using the GP
+ register under MIPS ECOFF. This is typically set by the -G
+ argument to the compiler, assembler or linker.
*/
+void
+bfd_set_gp_size (abfd, i)
+ bfd *abfd;
+ int i;
+{
+ if (abfd->xvec->flavour == bfd_target_ecoff_flavour)
+ ecoff_data (abfd)->gp_size = i;
+}
+/*
+FUNCTION
+ stuff
+
+DESCRIPTION
+ stuff which should be documented
+
+.#define bfd_sizeof_headers(abfd, reloc) \
+. BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc))
+.
+.#define bfd_find_nearest_line(abfd, sec, syms, off, file, func, line) \
+. BFD_SEND (abfd, _bfd_find_nearest_line, (abfd, sec, syms, off, file, func, line))
+.
+. {* Do these three do anything useful at all, for any back end? *}
+.#define bfd_debug_info_start(abfd) \
+. BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
+.
+.#define bfd_debug_info_end(abfd) \
+. BFD_SEND (abfd, _bfd_debug_info_end, (abfd))
+.
+.#define bfd_debug_info_accumulate(abfd, section) \
+. BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section))
+.
+.
+.#define bfd_stat_arch_elt(abfd, stat) \
+. BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
+.
+.#define bfd_set_arch_mach(abfd, arch, mach)\
+. BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach))
+.
+.#define bfd_get_relocated_section_contents(abfd, seclet, data, relocateable) \
+. BFD_SEND (abfd, _bfd_get_relocated_section_contents, (abfd, seclet, data, relocateable))
+.
+.#define bfd_relax_section(abfd, section, symbols) \
+. BFD_SEND (abfd, _bfd_relax_section, (abfd, section, symbols))
+.
+.#define bfd_seclet_link(abfd, data, relocateable) \
+. BFD_SEND (abfd, _bfd_seclet_link, (abfd, data, relocateable))
-
-
-
+*/
projects / binutils.git / blobdiff