don't worry about this; it will make calls look like simple
jumps (and the stack frames will be printed when the frame
pointer moves), which is a reasonably non-violent response.
-
-#if 0
- We skip this; it causes more problems than it's worth.
-#ifdef SUN4_COMPILER_FEATURE
- We do a special ifdef for the sun 4, forcing it to single step
- into calls which don't have prologues. This means that we can't
- nexti over leaf nodes, we can probably next over them (since they
- won't have debugging symbols, usually), and we can next out of
- functions returning structures (with a "call .stret4" at the end).
-#endif
-#endif
*/
-
-
-
-
-#include <stdio.h>
-#include <string.h>
#include "defs.h"
+#include <string.h>
#include "symtab.h"
#include "frame.h"
#include "inferior.h"
#define GET_LONGJMP_TARGET(PC_ADDR) 0
#endif
+
+/* Some machines have trampoline code that sits between function callers
+ and the actual functions themselves. If this machine doesn't have
+ such things, disable their processing. */
+#ifndef SKIP_TRAMPOLINE_CODE
+#define SKIP_TRAMPOLINE_CODE(pc) 0
+#endif
+
+
+#ifdef TDESC
+#include "tdesc.h"
+int safe_to_init_tdesc_context = 0;
+extern dc_dcontext_t current_context;
+#endif
+
/* Tables of how to react to signals; the user sets them. */
static char signal_stop[NSIG];
normal_stop ();
}
-#if 0
-/* This might be useful (not sure), but isn't currently used. See also
- write_pc(). */
-/* Writing the inferior pc as a register calls this function
- to inform infrun that the pc has been set in the debugger. */
-
-void
-writing_pc (val)
- CORE_ADDR val;
-{
- stop_pc = val;
- pc_changed = 1;
-}
-#endif
-
/* Record the pc and sp of the program the last time it stopped.
These are just used internally by wait_for_inferior, but need
to be preserved over calls to it and cleared when the inferior
CORE_ADDR stop_sp;
CORE_ADDR stop_func_start;
char *stop_func_name;
- CORE_ADDR prologue_pc;
+ CORE_ADDR prologue_pc, tmp;
int stop_step_resume_break;
struct symtab_and_line sal;
int remove_breakpoints_on_following_step = 0;
/* End of a stack dummy. Some systems (e.g. Sony
news) give another signal besides SIGTRAP,
so check here as well as above. */
- || (stop_sp INNER_THAN stop_pc
- && stop_pc INNER_THAN stop_frame_address)
+ || PC_IN_CALL_DUMMY (stop_pc, stop_sp, stop_frame_address)
);
if (!random_signal)
stop_signal = SIGTRAP;
&& (stop_sp INNER_THAN prev_sp
|| stop_frame_address != step_frame_address)))
{
-#if 0
- /* When "next"ing through a function,
- This causes an extra stop at the end.
- Is there any reason for this?
- It's confusing to the user. */
- /* Don't step through the return from a function
- unless that is the first instruction stepped through. */
- if (ABOUT_TO_RETURN (stop_pc))
- {
- stop_step = 1;
- break;
- }
-#endif
+ ;
}
/* We stepped out of the stepping range. See if that was due
if (step_range_end == 1)
step_range_end = (step_range_start = prev_pc) + 1;
remove_breakpoints_on_following_step = 1;
+ goto save_pc;
}
/* ==> See comments at top of file on this algorithm. <==*/
- else if (stop_pc == stop_func_start
+ if (stop_pc == stop_func_start
&& (stop_func_start != prev_func_start
|| prologue_pc != stop_func_start
|| stop_sp != prev_sp))
{
- /* It's a subroutine call */
- if (step_over_calls > 0
- || (step_over_calls && find_pc_function (stop_pc) == 0))
+ /* It's a subroutine call.
+ (0) If we are not stepping over any calls ("stepi"), we
+ just stop.
+ (1) If we're doing a "next", we want to continue through
+ the call ("step over the call").
+ (2) If we are in a function-call trampoline (a stub between
+ the calling routine and the real function), locate
+ the real function and change stop_func_start.
+ (3) If we're doing a "step", and there are no debug symbols
+ at the target of the call, we want to continue through
+ it ("step over the call").
+ (4) Otherwise, we want to stop soon, after the function
+ prologue ("step into the call"). */
+
+ if (step_over_calls == 0)
{
- /* A subroutine call has happened. */
- /* Set a special breakpoint after the return */
+ /* I presume that step_over_calls is only 0 when we're
+ supposed to be stepping at the assembly language level. */
+ stop_step = 1;
+ break;
+ }
- step_resume_break_address =
- ADDR_BITS_REMOVE (
- SAVED_PC_AFTER_CALL (
- get_current_frame ()));
+ if (step_over_calls > 0)
+ goto step_over_function;
- step_resume_break_duplicate
- = breakpoint_here_p (step_resume_break_address);
- if (breakpoints_inserted)
- insert_step_breakpoint ();
- }
+ tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
+ if (tmp != NULL)
+ stop_func_start = tmp;
+
+ if (find_pc_function (stop_func_start) != 0)
+ goto step_into_function;
+
+step_over_function:
+ /* A subroutine call has happened. */
+ /* Set a special breakpoint after the return */
+ step_resume_break_address =
+ ADDR_BITS_REMOVE
+ (SAVED_PC_AFTER_CALL (get_current_frame ()));
+ step_resume_break_duplicate
+ = breakpoint_here_p (step_resume_break_address);
+ if (breakpoints_inserted)
+ insert_step_breakpoint ();
+ goto save_pc;
+
+step_into_function:
/* Subroutine call with source code we should not step over.
Do step to the first line of code in it. */
- else if (step_over_calls)
- {
- SKIP_PROLOGUE (stop_func_start);
- sal = find_pc_line (stop_func_start, 0);
- /* Use the step_resume_break to step until
- the end of the prologue, even if that involves jumps
- (as it seems to on the vax under 4.2). */
- /* If the prologue ends in the middle of a source line,
- continue to the end of that source line.
- Otherwise, just go to end of prologue. */
+ SKIP_PROLOGUE (stop_func_start);
+ sal = find_pc_line (stop_func_start, 0);
+ /* Use the step_resume_break to step until
+ the end of the prologue, even if that involves jumps
+ (as it seems to on the vax under 4.2). */
+ /* If the prologue ends in the middle of a source line,
+ continue to the end of that source line.
+ Otherwise, just go to end of prologue. */
#ifdef PROLOGUE_FIRSTLINE_OVERLAP
- /* no, don't either. It skips any code that's
- legitimately on the first line. */
+ /* no, don't either. It skips any code that's
+ legitimately on the first line. */
#else
- if (sal.end && sal.pc != stop_func_start)
- stop_func_start = sal.end;
+ if (sal.end && sal.pc != stop_func_start)
+ stop_func_start = sal.end;
#endif
-
- if (stop_func_start == stop_pc)
- {
- /* We are already there: stop now. */
- stop_step = 1;
- break;
- }
- else
- /* Put the step-breakpoint there and go until there. */
- {
- step_resume_break_address = stop_func_start;
-
- step_resume_break_duplicate
- = breakpoint_here_p (step_resume_break_address);
- if (breakpoints_inserted)
- insert_step_breakpoint ();
- /* Do not specify what the fp should be when we stop
- since on some machines the prologue
- is where the new fp value is established. */
- step_frame_address = 0;
- /* And make sure stepping stops right away then. */
- step_range_end = step_range_start;
- }
- }
- else
- {
- /* We get here only if step_over_calls is 0 and we
- just stepped into a subroutine. I presume
- that step_over_calls is only 0 when we're
- supposed to be stepping at the assembly
- language level.*/
- stop_step = 1;
- break;
- }
- }
- /* No subroutine call; stop now. */
- else
- {
- /* We've wandered out of the step range (but we haven't done a
- subroutine call or return (that's handled elsewhere)). We
- don't really want to stop until we encounter the start of a
- new statement. If so, we stop. Otherwise, we reset
- step_range_start and step_range_end, and just continue. */
- sal = find_pc_line(stop_pc, 0);
-
- if (step_range_end == 1 /* Don't do this for stepi/nexti */
- || sal.line == 0 /* Stop now if no line # info */
- || (current_line != sal.line
- && stop_pc == sal.pc))
+
+ if (stop_func_start == stop_pc)
{
+ /* We are already there: stop now. */
stop_step = 1;
break;
- }
- else if (sal.line != 0)
+ }
+ else
+ /* Put the step-breakpoint there and go until there. */
{
- /* This is probably not necessary, but it probably makes
- stepping more efficient, as we avoid calling
- find_pc_line() for each instruction we step over. */
- step_range_start = sal.pc;
- step_range_end = sal.end;
+ step_resume_break_address = stop_func_start;
+
+ step_resume_break_duplicate
+ = breakpoint_here_p (step_resume_break_address);
+ if (breakpoints_inserted)
+ insert_step_breakpoint ();
+ /* Do not specify what the fp should be when we stop
+ since on some machines the prologue
+ is where the new fp value is established. */
+ step_frame_address = 0;
+ /* And make sure stepping stops right away then. */
+ step_range_end = step_range_start;
}
+ goto save_pc;
}
+
+ /* We've wandered out of the step range (but haven't done a
+ subroutine call or return). */
+
+ sal = find_pc_line(stop_pc, 0);
+
+ if (step_range_end == 1 || /* stepi or nexti */
+ sal.line == 0 || /* ...or no line # info */
+ (stop_pc == sal.pc /* ...or we're at the start */
+ && current_line != sal.line)) { /* of a different line */
+ /* Stop because we're done stepping. */
+ stop_step = 1;
+ break;
+ } else {
+ /* We aren't done stepping, and we have line number info for $pc.
+ Optimize by setting the step_range for the line.
+ (We might not be in the original line, but if we entered a
+ new line in mid-statement, we continue stepping. This makes
+ things like for(;;) statements work better.) */
+ step_range_start = sal.pc;
+ step_range_end = sal.end;
+ goto save_pc;
+ }
+ abort(); /* We never fall through here */
}
- else if (trap_expected
- && IN_SIGTRAMP (stop_pc, stop_func_name)
- && !IN_SIGTRAMP (prev_pc, prev_func_name))
+ if (trap_expected
+ && IN_SIGTRAMP (stop_pc, stop_func_name)
+ && !IN_SIGTRAMP (prev_pc, prev_func_name))
{
/* What has happened here is that we have just stepped the inferior
with a signal (because it is a signal which shouldn't make
keep_going:
+save_pc:
/* Save the pc before execution, to compare with pc after stop. */
prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */
prev_func_start = stop_func_start; /* Ok, since if DECR_PC_AFTER
FRAME_FP (fid) != inf_status->selected_frame_address ||
level != 0)
{
-#if 0
+#if 1
/* I'm not sure this error message is a good idea. I have
only seen it occur after "Can't continue previously
requested operation" (we get called from do_cleanups), in
projects / binutils.git / blobdiff