-# This file is a shell script that supplies the information necessary
-# to tailor a template configure script into the configure script
-# appropriate for this directory. For more information, check any
-# existing configure script.
+# This file is a shell script that overrides some of the tools and
+# flags used on a host specific basis.
# Since the "bfd/hosts" directory is shared by the bfd, opcodes, and
# binutils directories (at least), the index to it is also shared.
# This is that index. Each configure.in file should source this file
# in its per-host part.
-case "${host}" in
-# WHEN ADDING ENTRIES TO THIS MATRIX:
-# Make sure that the left side always has two dashes. Otherwise you
-# can get spurious matches. Even for unambiguous cases, do this as a
-# convention, else the table becomes a real mess to understand and maintain.
-#
-# Note that these entries cannot be fully alphabetical. Don't try.
-# The order of matching is critical when multiple lines could match.
-
-alpha-*-*) my_host=alphaosf ; host64=true ;;
-arm-*-riscix) my_host=riscix ;;
-a29k-*-*) my_host=ultra3 ;;
-
-hppa*-*-hpux*) my_host=hppahpux ;;
-hppa*-*-hiux*) my_host=hppahpux ;;
-hppa*-*-bsd*) my_host=hppabsd ;;
-hppa*-*-osf*) my_host=hppaosf ;;
-
-i[345]86-sequent-bsd*) my_host=symmetry ;;
-i[345]86-sequent-sysv4*) my_host=sysv4 ;;
-i[345]86-sequent-sysv*) my_host=symmetry ;;
-i[345]86-*-bsd*) my_host=i386bsd ;;
-i[345]86-*-netbsd*) my_host=i386bsd ;;
-i[345]86-ncr*-sysv4*) my_host=ncr3000 ;;
-i[345]86-*-go32*) my_host=go32 ;;
-i[345]86-esix-sysv3*) my_host=esix ;;
-i[345]86-*-sysv4*) my_host=i386v4 ;;
-i[345]86-*-sysv*) my_host=i386v ;;
-i[345]86-*-solaris*) my_host=solaris2 ;;
-i[345]86-*-sco*) my_host=i386sco ;;
-i[345]86-*-mach3*) my_host=i386mach3 ;;
-i[345]86-*-osf1mk*) my_host=i386osf1mk ;;
-i[345]86-*-msdos*) my_host=dose ;;
-i[345]86-*-linux*) my_host=i386linux ;;
-i[345]86-*-lynxos*) my_host=i386lynx ;;
-i[345]86-*-isc*) my_host=i386sco ;;
-i[345]86-*-aix*) my_host=i386aix ;;
-
-i860-*-*) my_host=stratus ;;
-
-mips-dec-bsd*) my_host=mipsbsd ;;
-mips-dec-mach3*) my_host=mipsmach3 ;;
-mips-dec-*) my_host=decstation ;;
-mips-sgi-irix3*) my_host=irix3 ;;
-mips-sgi-irix4*) my_host=irix4 ;;
-mips-sgi-irix5*) my_host=irix5 ;;
-mips-*-mach3*) my_host=mipsmach3 ;;
-mips-*-sysv4*) my_host=sysv4 ;;
-mips-*-sysv*) my_host=riscos ;;
-mips-*-riscos*) my_host=riscos ;;
-mips-sony-bsd*) my_host=news-mips ;;
+# This sets the following shell variables:
+# HDEFINES host specific compiler options
+# host64 set to true if this is a 64 bit host
+# HOST_64BIT_TYPE host 64 bit type
+# SHLIB_CC compiler to use when building shared library
+# SHLIB_CFLAGS flags to use when building shared library
+# PICFLAG may be set to flag to use to compile PIC
+# SHLINK may be set to the name to link the shared library to
+# ALLLIBS may be set to libraries to build
+# HLDFLAGS LDFLAGS specific to the host
+# RPATH_ENVVAR environment variable used to find shared libraries
+# INSTALL_SHLIB install a shared library
+
+HDEFINES=
+host64=false
+HOST_64BIT_TYPE=
-m68*-apollo*-sysv*) my_host=apollov68 ;;
-m68*-apollo*-bsd*) my_host=apollo68 ;;
-m68*-atari-sysv4*) my_host=m68kv4 ;;
-m68*-bull*-sysv*) my_host=dpx2 ;;
-m68*-convergent-sysv*) my_host=miniframe ;;
-m68*-cbm-amigados*) my_host=amigados ;;
-m68*-cbm-sysv4*) my_host=m68kv4 ;;
-m68*-hp-hpux*) my_host=hp300 ;;
-m68*-hp-bsd*) my_host=hp300bsd ;;
-m68*-*-lynxos*) my_host=m68klynx ;;
-m68*-motorola-sysv*) my_host=delta68 ;;
-m68*-sony-*) my_host=news ;;
-m68*-sun-*) my_host=sun3 ;;
-
-m88*-*-sysv4*) my_host=delta88v4 ;;
-m88*-motorola-sysv*) my_host=delta88 ;;
-m88*-harris-*) my_host=harris ;;
-m88*-*-dgux*) my_host=dgux ;;
-m88*-*-mach3*) my_host=m88kmach3 ;;
-
-ns32k-pc532-mach) my_host=pc532mach ;;
-ns32k-*-netbsd*) my_host=ns32knbsd ;;
-
-romp-*-*) my_host=rtbsd ;;
+case "${host}" in
-rs6000-*-lynx*) my_host=rs6000lynx ;;
+alpha-*-*) host64=true; HOST_64BIT_TYPE=long ;;
-rs6000-*-*) my_host=rs6000 ;;
+hppa*-*-hpux*) HDEFINES=-DHOST_HPPAHPUX ;;
+hppa*-*-hiux*) HDEFINES=-DHOST_HPPAHPUX ;;
+hppa*-*-bsd*) HDEFINES=-DHOST_HPPABSD ;;
+hppa*-*-osf*) HDEFINES=-DHOST_HPPAOSF ;;
-sparc-*-lynxos*) my_host=sparclynx ;;
-sparc-*-netbsd*) my_host=sparcnbsd;;
-sparc-*-sunos64*) my_host=sparc-ll ;;
-sparc-*-sysv4*) my_host=sysv4 ;;
-sparc-*-solaris2*) my_host=solaris2 ;;
-sparc-*-sysv64*) my_host=sysv4-ll ;;
-sparc-*-*) my_host=sparc ;;
+i[345]86-sequent-bsd*) HDEFINES=-Dshared=genshared ;;
+i[345]86-sequent-sysv4*) ;;
+i[345]86-sequent-sysv*) HDEFINES=-Dshared=genshared ;;
-tahoe-*-*) my_host=tahoe ;;
+mips-dec-netbsd*) ;;
+mips-dec-*) HDEFINES="-G 4" ;;
+mips-sgi-irix3*) HDEFINES="-G 4" ;;
+mips-sgi-irix4*) HDEFINES="-G 4" ;;
+mips-*-sysv4*) ;;
+mips-*-sysv*) HDEFINES="-G 4" ;;
+mips-*-riscos*) HDEFINES="-G 4" ;;
-vax-*-ultrix2*) my_host=vaxult2 ;;
-vax-*-ultrix*) my_host=vaxult ;;
-vax-*-*) my_host=vaxbsd ;;
+m68*-hp-hpux*) HDEFINES=-DHOST_HP300HPUX ;;
-we32k-*-*) my_host=we32k ;;
+esac
+# If we are configuring with --enable-shared, adjust the shared
+# library support based on the host. This support must work for both
+# the BFD and the opcodes libraries.
+HLDFLAGS=
+RPATH_ENVVAR=LD_LIBRARY_PATH
+SHLIB_CC='$(CC)'
+SHLIB_CFLAGS='-shared'
+INSTALL_SHLIB='$(INSTALL_PROGRAM) $$f $(libdir)/$$tf;'
+if [ "${shared}" = "true" ]; then
+ case "${host}" in
+ hppa*-*-*) picfrag=${srcdir}/../config/mh-papic ;;
+ i[3456]86-*-*) picfrag=${srcdir}/../config/mh-x86pic ;;
+ *-*-*) picfrag=${srcdir}/../config/mh-${host_cpu}pic ;;
+ esac
+ if [ -f "${picfrag}" ]; then
+ pic=`sed -n -e 's/^PICFLAG[ ]*=[ ]*\(.*\)$/\1/p' ${picfrag}`
+ if [ -n "${pic}" ]; then
+ PICFLAG=${pic}
+ fi
+ fi
+
+ case "${host}" in
+ *-dec-osf*)
+ # -fpic is not needed on the Alpha.
+ PICFLAG=
+ HLDFLAGS='-rpath $(libdir)'
+ SHLIB_CFLAGS='-shared -Wl,-soname,$(SONAME)'
+ ;;
+ *-*-hpux*)
+ # HP/UX uses .sl for shared libraries.
+ SHLINK=`echo ${SHLINK} | sed -e 's/so$/sl/'`
+ SHLIB_CFLAGS='-shared $(PICFLAG)'
+ HLDFLAGS='-Wl,+s,+b,$(libdir)'
+ RPATH_ENVVAR=SHLIB_PATH
+ INSTALL_SHLIB='$(INSTALL_PROGRAM) $$f $(libdir)/$$tf; chmod -w $(libdir)/$$tf;'
+ ;;
+ *-*-irix[56]*)
+ # -fpic is not needed on Irix 5 or 6.
+ PICFLAG=
+ SHLIB_CFLAGS='-shared -Wl,-soname,$(SONAME)'
+ HLDFLAGS='-Wl,-rpath,$(libdir)'
+ ;;
+ *-*-linux*aout*)
+ ;;
+ *-*-linux*)
+ SHLIB_CFLAGS='-shared -Wl,-soname,$(SONAME)'
+ case "${libdir}" in
+ /lib | /usr/lib) ;;
+ *) HLDFLAGS='-Wl,-rpath,$(libdir)' ;;
+ esac
+ ;;
+ *-*-sysv4* | *-*-solaris*)
+ SHLIB_CFLAGS='-shared -h $(SONAME)'
+ HLDFLAGS='-R $(libdir)'
+ ;;
+ *-*-sunos*)
+ # Build a libTARGET-bfd.so.VERSION symlink in the object directory.
+ ALLLIBS=`echo ${ALLLIBS} | sed -e 's/\$(SHLINK)/stamp-tshlink/'`
+ ;;
+ esac
+fi
+
+# On SunOS, if the linker supports the -rpath option, use it to
+# prevent ../bfd and ../opcodes from being included in the run time
+# search path.
+case "${host}" in
+ *-*-sunos*)
+ echo 'main () { }' > conftest.c
+ ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
+ if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
+ :
+ elif grep 'No such file' conftest.t >/dev/null 2>&1; then
+ :
+ elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
+ :
+ elif [ "${shared}" = "true" ]; then
+ HLDFLAGS='-Wl,-rpath=$(libdir)'
+ else
+ HLDFLAGS='-Wl,-rpath='
+ fi
+ rm -f conftest.t conftest.c conftest
+ ;;
esac
projects / binutils.git / blobdiff