Do-first:
-arc_files="cpu-arc.c elf32-arc.c"
-
-if ( echo $* | grep keep\-arc > /dev/null ) ; then
- keep_these_too="${arc_files} ${keep_these_too}"
-else
- lose_these_too="${arc_files} ${lose_these_too}"
-fi
-
d30v_files="cpu-d30v.c elf32-d30v.c"
if ( echo $* | grep keep\-d30v > /dev/null ) ; then
lose_these_too="${d30v_files} ${lose_these_too}"
fi
-m32r_files="cpu-m32r.c elf32-m32r.c"
-
-if ( echo $* | grep keep\-m32r > /dev/null ) ; then
- keep_these_too="${m32r_files} ${keep_these_too}"
-else
- lose_these_too="${m32r_files} ${lose_these_too}"
-fi
-
-v850_files="cpu-v850.c elf32-v850.c"
-
-if ( echo $* | grep keep\-v850 > /dev/null ) ; then
- keep_these_too="${v850_files} ${keep_these_too}"
-else
- lose_these_too="${v850_files} ${lose_these_too}"
-fi
-
tic80_files="cpu-tic80.c coff-tic80.c"
if ( echo $* | grep keep\-tic80 > /dev/null ) ; then
lose_these_too="${tic80_files} ${lose_these_too}"
fi
+sky_files="cpu-txvu.c elf32-txvu.c"
+
+if ( echo $* | grep keep\-sky > /dev/null ) ; then
+ keep_these_too="${sky_files} ${keep_these_too}"
+else
+ lose_these_too="${sky_files} ${lose_these_too}"
+fi
+
# All files listed between the "Things-to-keep:" line and the
# "Files-to-sed:" line will be kept. All other files will be removed.
# Directories listed in this section will have their own Sanitize
ChangeLog
ChangeLog.1
ChangeLog.2
+Makefile.am
Makefile.in
PORTING
README
TODO
-VERSION
acconfig.h
+acinclude.m4
aclocal.m4
aix386-core.c
aout-adobe.c
coff-rs6000.c
coff-sh.c
coff-sparc.c
+coff-stgo32.c
coff-svm68k.c
coff-u68k.c
coff-we32k.c
cofflink.c
coffswap.h
config.bfd
-config.h-vms
config.in
configure
configure.bat
+configure.com
configure.host
configure.in
corefile.c
cpu-a29k.c
cpu-alpha.c
+cpu-arc.c
cpu-arm.c
cpu-d10v.c
cpu-h8300.c
cpu-i386.c
cpu-i860.c
cpu-i960.c
+cpu-m32r.c
cpu-m68k.c
cpu-m88k.c
cpu-mips.c
-cpu-mn10200.c
-cpu-mn10300.c
+cpu-m10200.c
+cpu-m10300.c
cpu-ns32k.c
cpu-powerpc.c
cpu-rs6000.c
cpu-sh.c
cpu-sparc.c
+cpu-v850.c
cpu-vax.c
cpu-we32k.c
cpu-w65.c
demo64.c
dep-in.sed
doc
+dwarf2.c
ecoff.c
ecofflink.c
ecoffswap.h
elf-bfd.h
elf.c
+elf32-arc.c
elf32-d10v.c
elf32-gen.c
elf32-hppa.c
elf32-hppa.h
elf32-i386.c
elf32-i860.c
+elf32-m32r.c
elf32-m68k.c
elf32-m88k.c
elf32-mips.c
-elf32-mn10200.c
-elf32-mn10300.c
+elf-m10200.c
+elf-m10300.c
elf32-ppc.c
elf32-sh.c
elf32-sparc.c
+elf32-v850.c
elf32.c
elf64-alpha.c
elf64-gen.c
freebsd.h
gen-aout.c
genlink.h
+go32stub.h
hash.c
host-aout.c
hosts
section.c
som.c
som.h
+sparclinux.c
sparclynx.c
sparcnetbsd.c
srec.c
stabs.c
stab-syms.c
+stamp-h.in
sunos.c
syms.c
sysdep.h
Do-last:
-arc_files="ChangeLog ChangeLog.2 Makefile.in archures.c reloc.c targets.c config.bfd configure.in configure bfd-in2.h elf.c libbfd.h"
-if ( echo $* | grep keep\-arc > /dev/null ) ; then
- for i in $arc_files ; do
- if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+d30v_files="ChangeLog ChangeLog.2 Makefile.in Makefile.am archures.c reloc.c targets.c config.bfd configure.in configure bfd-in2.h elf.c libbfd.h"
+if ( echo $* | grep keep\-d30v > /dev/null ) ; then
+ for i in $d30v_files ; do
+ if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping arc stuff in $i
+ echo Keeping d30v stuff in $i
fi
fi
done
else
- for i in $arc_files ; do
- if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+ for i in $d30v_files ; do
+ if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"arc\" from $i...
+ echo Removing traces of \"d30v\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-arc/,/end-\sanitize\-arc/d' < $i > new
+ sed '/start\-sanitize\-d30v/,/end-\sanitize\-d30v/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
-d30v_files="ChangeLog ChangeLog.2 Makefile.in archures.c reloc.c targets.c config.bfd configure.in configure bfd-in2.h elf.c libbfd.h"
-if ( echo $* | grep keep\-d30v > /dev/null ) ; then
- for i in $d30v_files ; do
- if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
+v850_files="ChangeLog Makefile.in Makefile.am archures.c reloc.c targets.c config.bfd configure.in configure bfd-in2.h elf.c libbfd.h elf32-v850.c cpu-v850.c"
+if ( echo $* | grep keep\-v850e > /dev/null ) ; then
+ for i in $v850_files ; do
+ if test -r $i && (grep sanitize-v850e $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping d30v stuff in $i
+ echo Keeping v850e stuff in $i
fi
fi
done
else
- for i in $d30v_files ; do
- if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
+ for i in $v850_files ; do
+ if test -f $i && (grep sanitize-v850e $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"d30v\" from $i...
+ echo Removing traces of \"v850e\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-d30v/,/end-\sanitize\-d30v/d' < $i > new
+ sed '/start\-sanitize\-v850e/,/end\-sanitize\-v850e/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
-m32r_files="ChangeLog Makefile.in config.bfd configure.in configure elf.c archures.c reloc.c targets.c bfd-in2.h libbfd.h"
-if ( echo $* | grep keep\-m32r > /dev/null ) ; then
- for i in $m32r_files ; do
- if test ! -d $i && (grep sanitize-m32r $i > /dev/null) ; then
+r5900_files="ChangeLog config.bfd archures.c bfd-in2.h cpu-mips.c"
+if ( echo $* | grep keep\-r5900 > /dev/null ) ; then
+ for i in $r5900_files ; do
+ if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping m32r stuff in $i
+ echo Keeping r5900 stuff in $i
fi
fi
done
else
- for i in $m32r_files ; do
- if test ! -d $i && (grep sanitize-m32r $i > /dev/null) ; then
+ for i in $r5900_files ; do
+ if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"m32r\" from $i...
+ echo Removing traces of \"r5900\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-m32r/,/end-\sanitize\-m32r/d' < $i > new
+ sed '/start\-sanitize\-r5900/,/end-\sanitize\-r5900/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
-v850_files="ChangeLog ChangeLog.2 Makefile.in archures.c reloc.c targets.c config.bfd configure.in configure bfd-in2.h elf.c libbfd.h"
-if ( echo $* | grep keep\-v850 > /dev/null ) ; then
- for i in $v850_files ; do
- if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
+tx19_files="archures.c bfd-in2.h cpu-mips.c"
+if ( echo $* | grep keep\-tx19 > /dev/null ) ; then
+ for i in $tx19_files ; do
+ if test ! -d $i && (grep sanitize-tx19 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping v850 stuff in $i
+ echo Keeping tx19 stuff in $i
fi
fi
done
else
- for i in $v850_files ; do
- if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
+ for i in $tx19_files ; do
+ if test ! -d $i && (grep sanitize-tx19 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"v850\" from $i...
+ echo Removing traces of \"tx19\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-v850/,/end-\sanitize\-v850/d' < $i > new
+ sed '/start\-sanitize\-tx19/,/end-\sanitize\-tx19/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
-r5900_files="ChangeLog config.bfd"
-if ( echo $* | grep keep\-r5900 > /dev/null ) ; then
- for i in $r5900_files ; do
- if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+tx49_files="archures.c bfd-in2.h cpu-mips.c"
+if ( echo $* | grep keep\-tx49 > /dev/null ) ; then
+ for i in $tx49_files ; do
+ if test ! -d $i && (grep sanitize-tx49 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping r5900 stuff in $i
+ echo Keeping tx49 stuff in $i
fi
fi
done
else
- for i in $r5900_files ; do
- if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+ for i in $tx49_files ; do
+ if test ! -d $i && (grep sanitize-tx49 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"r5900\" from $i...
+ echo Removing traces of \"tx49\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-r5900/,/end-\sanitize\-r5900/d' < $i > new
+ sed '/start\-sanitize\-tx49/,/end-\sanitize\-tx49/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+sh4_files="ChangeLog config.bfd archures.c bfd-in2.h cpu-sh.c"
+if ( echo $* | grep keep\-sh4 > /dev/null ) ; then
+ for i in $sh4_files ; do
+ if test ! -d $i && (grep sanitize-sh4 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping sh4 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $sh4_files ; do
+ if test ! -d $i && (grep sanitize-sh4 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"sh4\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-sh4/,/end-\sanitize\-sh4/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
-tic80_files="ChangeLog Makefile.in archures.c bfd-in2.h config.bfd configure configure.in targets.c coffcode.h"
+tic80_files="ChangeLog Makefile.in Makefile.am archures.c bfd-in2.h config.bfd configure configure.in targets.c coffcode.h coffswap.h"
if ( echo $* | grep keep\-tic80 > /dev/null ) ; then
for i in $tic80_files ; do
if test ! -d $i && (grep sanitize-tic80 $i > /dev/null) ; then
done
fi
+vr5400_files="ChangeLog archures.c bfd-in2.h bfd-in.h cpu-mips.c"
+if ( echo $* | grep keep\-vr5400 > /dev/null ) ; then
+ for i in $vr5400_files ; do
+ if test ! -d $i && (grep sanitize-vr5400 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping vr5400 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $vr5400_files ; do
+ if test ! -d $i && (grep sanitize-vr5400 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"vr5400\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-vr5400/,/end-\sanitize\-vr5400/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+m32rx_files="ChangeLog archures.c bfd-in2.h elf32-m32r.c cpu-m32r.c"
+if ( echo $* | grep keep\-m32rx > /dev/null ) ; then
+ for i in $m32rx_files ; do
+ if test -r $i && (grep sanitize-m32rx $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping m32rx stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $m32rx_files ; do
+ if test -f $i && (grep sanitize-m32rx $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"m32rx\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-m32rx/,/end\-sanitize\-m32rx/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+sky_files="ChangeLog Makefile.in Makefile.am archures.c elf.c reloc.c targets.c config.bfd configure.in configure bfd-in2.h libbfd.h"
+if ( echo $* | grep keep\-sky > /dev/null ) ; then
+ for i in $sky_files ; do
+ if test ! -d $i && (grep sanitize-sky $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping sky stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $sky_files ; do
+ if test ! -d $i && (grep sanitize-sky $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"sky\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-sky/,/end-\sanitize\-sky/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
for i in * ; do
if test ! -d $i && (grep sanitize $i > /dev/null) ; then
echo '***' Some mentions of Sanitize are still left in $i! 1>&2
projects / binutils.git / blobdiff