struct objfile;
struct ui_file;
struct mem_attrib;
+struct target_ops;
/* This include file defines the interface between the main part
of the debugger, and the part which is target-specific, or
/* Given a name (SIGHUP, etc.), return its signal. */
enum target_signal target_signal_from_name (char *);
\f
+/* Request the transfer of up to LEN 8-bit bytes of the target's
+ OBJECT. The OFFSET, for a seekable object, specifies the starting
+ point. The ANNEX can be used to provide additional data-specific
+ information to the target.
+
+ Return the number of bytes actually transfered, zero when no
+ further transfer is possible, and -1 when the transfer is not
+ supported.
+
+ NOTE: cagney/2003-10-17: The current interface does not support a
+ "retry" mechanism. Instead it assumes that at least one byte will
+ be transfered on each call.
+
+ NOTE: cagney/2003-10-17: The current interface can lead to
+ fragmented transfers. Lower target levels should not implement
+ hacks, such as enlarging the transfer, in an attempt to compensate
+ for this. Instead, the target stack should be extended so that it
+ implements supply/collect methods and a look-aside object cache.
+ With that available, the lowest target can safely and freely "push"
+ data up the stack.
+
+ NOTE: cagney/2003-10-17: Unlike the old query and the memory
+ transfer mechanisms, these methods are explicitly parameterized by
+ the target that it should be applied to.
+
+ NOTE: cagney/2003-10-17: Just like the old query and memory xfer
+ methods, these new methods perform partial transfers. The only
+ difference is that these new methods thought to include "partial"
+ in the name. The old code's failure to do this lead to much
+ confusion and duplication of effort as each target object attempted
+ to locally take responsibility for something it didn't have to
+ worry about.
+
+ NOTE: cagney/2003-10-17: For backward compatibility with the
+ "target_query" method that this replaced, when BUF, OFFSET and LEN
+ are NULL/zero, return the "minimum" buffer size. See "remote.c"
+ for further information. */
+
+enum target_object
+{
+ /* Kernel Object Display transfer. See "kod.c" and "remote.c". */
+ TARGET_OBJECT_KOD,
+ /* AVR target specific transfer. See "avr-tdep.c" and "remote.c". */
+ TARGET_OBJECT_AVR,
+ /* Transfer up-to LEN bytes of memory starting at OFFSET. */
+ TARGET_OBJECT_MEORY
+ /* Possible future ojbects: TARGET_OJBECT_FILE, TARGET_OBJECT_PROC,
+ TARGET_OBJECT_AUXV, ... */
+};
+
+extern LONGEST target_read_partial (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, void *buf,
+ ULONGEST offset, LONGEST len);
+
+extern LONGEST target_write_partial (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, const void *buf,
+ ULONGEST offset, LONGEST len);
+
+/* Wrappers to perform the full transfer. */
+extern LONGEST target_read (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, void *buf,
+ ULONGEST offset, LONGEST len);
+
+extern LONGEST target_write (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, const void *buf,
+ ULONGEST offset, LONGEST len);
+\f
/* If certain kinds of activity happen, target_wait should perform
callbacks. */
struct target_ops
{
+ struct target_ops *beneath; /* To the target under this one. */
char *to_shortname; /* Name this target type */
char *to_longname; /* Name for printing */
char *to_doc; /* Documentation. Does not include trailing
void (*to_attach) (char *, int);
void (*to_post_attach) (int);
void (*to_detach) (char *, int);
+ void (*to_disconnect) (char *, int);
void (*to_resume) (ptid_t, int, enum target_signal);
ptid_t (*to_wait) (ptid_t, struct target_waitstatus *);
void (*to_post_wait) (ptid_t, int);
struct mem_attrib *attrib,
struct target_ops *target);
-#if 0
- /* Enable this after 4.12. */
-
- /* Search target memory. Start at STARTADDR and take LEN bytes of
- target memory, and them with MASK, and compare to DATA. If they
- match, set *ADDR_FOUND to the address we found it at, store the data
- we found at LEN bytes starting at DATA_FOUND, and return. If
- not, add INCREMENT to the search address and keep trying until
- the search address is outside of the range [LORANGE,HIRANGE).
-
- If we don't find anything, set *ADDR_FOUND to (CORE_ADDR)0 and
- return. */
-
- void (*to_search) (int len, char *data, char *mask,
- CORE_ADDR startaddr, int increment,
- CORE_ADDR lorange, CORE_ADDR hirange,
- CORE_ADDR * addr_found, char *data_found);
-
-#define target_search(len, data, mask, startaddr, increment, lorange, hirange, addr_found, data_found) \
- (*current_target.to_search) (len, data, mask, startaddr, increment, \
- lorange, hirange, addr_found, data_found)
-#endif /* 0 */
-
void (*to_files_info) (struct target_ops *);
int (*to_insert_breakpoint) (CORE_ADDR, char *);
int (*to_remove_breakpoint) (CORE_ADDR, char *);
char *(*to_pid_to_str) (ptid_t);
char *(*to_extra_thread_info) (struct thread_info *);
void (*to_stop) (void);
- int (*to_query) (int /*char */ , char *, char *, int *);
void (*to_rcmd) (char *command, struct ui_file *output);
struct symtab_and_line *(*to_enable_exception_callback) (enum
exception_event_kind,
struct objfile *objfile,
CORE_ADDR offset);
+ /* See above. */
+ LONGEST (*to_read_partial) (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, void *buf,
+ ULONGEST offset, LONGEST len);
+ LONGEST (*to_write_partial) (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, const void *buf,
+ ULONGEST offset, LONGEST len);
+
int to_magic;
/* Need sub-structure for target machine related rather than comm related?
*/
extern struct target_ops current_target;
-/* An item on the target stack. */
-
-struct target_stack_item
- {
- struct target_stack_item *next;
- struct target_ops *target_ops;
- };
-
-/* The target stack. */
-
-extern struct target_stack_item *target_stack;
-
/* Define easy words for doing these operations on our current target. */
#define target_shortname (current_target.to_shortname)
extern void target_detach (char *, int);
+/* Disconnect from the current target without resuming it (leaving it
+ waiting for a debugger). */
+
+extern void target_disconnect (char *, int);
+
/* Resume execution of the target process PTID. STEP says whether to
single-step or to run free; SIGGNAL is the signal to be given to
the target, or TARGET_SIGNAL_0 for no signal. The caller may not
#define target_stop current_target.to_stop
-/* Queries the target side for some information. The first argument is a
- letter specifying the type of the query, which is used to determine who
- should process it. The second argument is a string that specifies which
- information is desired and the third is a buffer that carries back the
- response from the target side. The fourth parameter is the size of the
- output buffer supplied. */
-
-#define target_query(query_type, query, resp_buffer, bufffer_size) \
- (*current_target.to_query) (query_type, query, resp_buffer, bufffer_size)
-
/* Send the specified COMMAND to the target's monitor
(shell,interpreter) for execution. The result of the query is
placed in OUTBUF. */
#define target_get_thread_local_address_p() \
(target_get_thread_local_address != NULL)
-/* Hook to call target-dependent code after reading in a new symbol table. */
-
-#ifndef TARGET_SYMFILE_POSTREAD
-#define TARGET_SYMFILE_POSTREAD(OBJFILE)
-#endif
-
/* Hook to call target dependent code just after inferior target process has
started. */
bfd *bfd; /* BFD file pointer */
};
+/* Return the "section" containing the specified address. */
+struct section_table *target_section_by_addr (struct target_ops *target,
+ CORE_ADDR addr);
+
+
/* Builds a section table, given args BFD, SECTABLE_PTR, SECEND_PTR.
Returns 0 if OK, 1 on error. */
projects / binutils.git / blobdiff