+
+ * configure: Remove temporary files on receipt of a signal.
+
+
+ * configure: If there is a package_makefile_frag, remove
+ ${subdir}/Makefile.tem after copying it in.
+
+
+ * build_all.mk: support rs6000 lynx identifies itself as
+ rs6000-lynx-lynxos2.2.2. Also, use /usr/cygnus/progressive/bin/gcc
+ since /bin/gcc is too feeble to compile a modern gcc.
+
+
+ * brought devo/test-build.mk update-to-date with progressive/
+ test-build.mk. Add lynx targets and hppa flag info.
+
+
+ * configure.in: Use mh-ncrsvr43. Patch from
+
+
+ * config.guess (i386-unknown-bsdi): No longer need to
+ check #if defined(__bsdi__) && defined(__i386__).
+
+
+ * configure: Set program_transform_nameoption correctly.
+
+
+ * brought build-all.mk update-to-date with progressive build-all.mk,
+ added new targets and hppa info.
+
+
+ * configure: If config.guess result is a prefix of the user
+ specified target, assume a native build and use the user specified
+ target as the host alias. Remove SunOS patch suffix removal hack.
+ * configure.in: Remove SunOS patch suffix removal hack.
+
+ * Makefile.in (CROSS_CHECK_MODULES): Remove check-flex, since it's
+ in NATIVE_CHECK_MODULES.
+
+
+ * Makefile.in: Rename HOST_ONLY to NATIVE.
+ * configure: Delete SunOs patch suffix from host_canonical
+ and build_canonical variables that are prepended to Makefiles.
+ * configure.in: Add comments for easier maintenance.
+
+
+ * Makefile.in: Add all-libproc target similar to all-gui.
+
+
+ * Makefile.in (CHECK_MODULES): split into
+ HOST_ONLY_CHECK_MODULES and CROSS_CHECK_MODULES.
+
+
+ * config.guess (i386-unknown-bsdi): New system to guess.
+
+
+ * Makefile.in: Add all-gui target (but not yet build by "all").
+
+
+ * config.sub: Move deletion of patch suffix from here...
+ * configure.in: To here, at Ian's suggestion. The top-
+ level scripts might need to know of a patch level.
+
+
+ * config.sub: Strip off patch suffix so rtl is recognized
+ as a sunos4.1.3 machine, even though it's been patched.
+
+
+ * Makefile.in (INSTALL_LAST): Delete.
+ (INSTALL_DOSREL): New.
+
+
+ * configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
+ Don't set use_gnu_ld to no for *-*-sysv4; that only controls
+ whether we pass down --with-gnu-ld anyhow.
+
+
+ * Makefile.in (INSTALL_LAST): Change operation so it works
+ on more flavors of make.
+ * configure.in (go32): Don't build libg++ or libio.
+
+
+ * Makefile.in (Move HOST_PREFIX_1 and friends up so
+ they can be overriden by templates.
+
+
+ * configure.in (target==go32): Don't build gdb.
+ * dosrel: New directory.
+
+
+ * configure.in (host==go32): Configure dosrel too.
+ * Makefile.in (INTALL_TARGET): Call INSTALL_LAST last.
+ (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): Undefine, they should
+ be set by incoming names or templates.
+ (INSTALL_LAST): New rule.
+ * config/mh-go32: New fragment.
+
+
+ * config.sub (sparclitefrw, sparclitefrwcompat): Don't set the os.
+
+
+ * config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it
+ unique in 8.3 naming schemes.
+ * configure.in (appdirs): New variable. Currently empty, but will
+ be used in gas distribution. If nonempty, lists a set of
+ directories at least one of which must get configured, or top
+ level configuration is considered to have failed.
+ (rs6000-*-lynxos*): Use new file name.
+
+
+ Eliminate XTRAFLAGS.
+ * Makefile.in (CC_FOR_TARGET): If newlib exists, refer to the
+ newlib include files using -idirafter, and also use -nostdinc.
+ (CXX_FOR_TARGET): Likewise.
+ (XTRAFLAGS): Removed.
+ (BASE_FLAGS_TO_PASS): Remove XTRAFLAGS_FOR_TARGET.
+ (EXTRA_HOST_FLAGS): Remove XTRAFLAGS.
+ (EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): Likewise.
+ ($(DO_X)): Don't pass down XTRAFLAGS.
+
+
+ * configure.in (mips*-dec-bsd*): New target; do build linker.
+ (mips*-*-bsd*): New target; don't build linker.
+
+
+ * configure.in: support rs6000-*-lynxos* configuration.
+ support sunos4 as a cross target.
+
+ * config.sub: look for lynx*, not lynx since the OS version may
+ legitimately be part of the name.
+
+
+ * configure.in (i[34]86-*-sco*): Move to be with other i386
+ targets.
+ (romp-*-*): New target. Skip various binary utilities.
+ (vax-*-*): New target. Don't build newlib.
+ (vax-*-vms): Renamed from *-*-vms. Don't build opcodes or newlib.
+
+
+ * configure.in: Only set host_makefile_frag if config
+ directory exists.
+
+
+ * install.sh: If $dstdir exists, don't check whether each
+ component does.
+
+
+ * test-build.mk (HOLES): Add sleep; used by rcs/src/conf.sh.
+
+
+ * configure.in (*-*-lynxos*): Don't configure newlib for either
+ native or cross Lynx.
+
+
+ * config.sub (sparc64-elf): Fix os.
+ (z8k): Remove duplicate.
+
+
+ * Makefile.in (gcc-no-fixedincludes): Touch gcc/include/fixed, not
+ gcc/stmp-fixproto, to try to prevent fixproto from being run.
+
+
+ * configure: Make file links cleanly even if Lynx fails on
+ an NFS symlink (at least fail cleanly).
+
+
+ * test-build.mk (CC): For mips-sgi-irix4, change -XNh1500 to
+ -XNh2000.
+
+
+ * configure: Unknown options are fatal again.
+
+
+ * configure: Ignore --x-includes and --x-libraries, for Autoconf
+ compatibility.
+
+
+ * build-all.mk: Add `clean' target.
+
+
+ * config.guess: Add SINIX support.
+ * configure.in: Add mips-*-sysv4* support.
+
+
+ * build-all.mk: Document all useful targets.
+ If canonhost is sparc-sun-solaris2.3, change it to sparc-sun-solaris2.
+ If canonhost is mips-sgi-irix4.0.5H, change it to mips-sgi-irix4.
+
+
+ * configure: Support --silent, --quiet.
+
+
+ * configure: Support --disable-FEATURE.
+
+
+ * config.guess: Recognize NCR running SVR4.3.
+
+
+ * config.guess: Make BSDI generate i386-unknown-bsd386.
+
+
+ * configure.in (powerpc-*-aix*): Treat like rs6000-*-*.
+
+
+ * configure: Make unrecognized options give nonfatal warnings
+ instead of fatal errors, and pass them to any subdirectory
+ configures in case they recognize them.
+ Make --x equivalent to --with-x.
+
+
+ * configure: Add --enable-* options. Clean up usage message and
+ some comments.
+
+
+ * Makefile.in (NM_FOR_TARGET): Build tree version is now nm.new.
+
+
+ * configure.in (hppa*-*-*): Enable binutils.
+
+
+ * config.sub: Recognize cisco.
+
+
+ * Makefile.in (CXXFLAGS): Add -fexternal-templates.
+
+
+ * config.guess: about target *-hitachi-hiuxwe2, don't print more
+ than one configuration name. Add comment.
+
+
+ * config.guess: about target *-hitachi-hiuxwe2, fixed
+ machine guessing order. [Hitachi's CPU_IS_HP_MC68K
+ macro is incorrect.]
+
+
+ * Makefile.in (TAGS): Just build TAGS in each subdirectory, rather
+ than the "make ls" stuff which used to be here.
+
+
+ * config.guess: Recognize i[34]86-unknown-freebsd.
+
+
+ * configure.in (noconfigdirs for alpha): Remove libg++ and libio.
+
+
+ * config.guess: Check for ptx.
+
+
+ * config.sub: Add os9k checking.
+
+
+ * config.guess: Handle OSF1 running on HPPA processors
+
+
+ * configure: If subdir configure fails, print out a message with
+ subdirectory name, in case subdir's configure code didn't identify
+ itself.
+
+
+ * configure.in: Remove embedded newlines from configdirs.
+ Avoid mismatches of substrings. Fix matching strings at end
+ of configdirs.
+
+Fri Feb 11 15:33:33 1994 Stu Grossman (grossman at cygnus.com)
+
+ * config.guess: Add Lynx/rs6000 config support.
+
+
+ * configure.in (alpha-dec-osf1*, alpha*-*-*): Build gas.
+
+
+ * configure.in (hppa*-*-osf*): Treat this just like most other
+ PA configurations (eg no binutils or ld).
+ (hppa*-*-*elf*): These configurations have binutils and ld.
+
+
+
+
+ * configure.in (rs6000-*-*): Build gas.
+
+
+ * Makefile.in: Avoid bug in losing hpux sed.
+
+
+ * Makefile.in, test-build.mk: Remove MUNCH_NM; it was only needed
+ for GDB and GDB has been fixed to not need it.
+
+Mon Jan 31 18:40:55 1994 Stu Grossman (grossman at cygnus.com)
+
+ * config/mh-lynxosrs6k: Account for lack of ranlib!
+
+
+ * config.guess: Recognize vax hosts.
+
+
+ * configure (while loop): Don't use "break 2" inside case
+ statement -- the case statement isn't an enclosing loop.
+
+
+ * config.guess: Clean up NeXT support, to allow nextstep
+ on Intel machines. Make OS be nextstep.
+
+
+ * config.guess: Add alternate forms for Convex.
+
+Thu Jan 20 16:13:41 1994 Stu Grossman (grossman at cygnus.com)
+
+ * configure: Completely rewrite option processing. Take
+ advantage of pattern-matching to avoid invoking test frequently.
+ Also clean up host and target defaulting logic.
+
+
+ * Makefile.in: Replace all occurrances of "rootme" with "r" and
+ "$${rootme}" with "$$r", to increase the likelihood that the do-*
+ commands (plus user environment) will fit SCO limits.
+
+
+ * configure.in: Don't issue warnings about directories which are
+ not being configured if -norecursion is set. Correct test for
+ --with-gnu-as and --with-gnu-ld to not get confused by substring
+ matches.
+
+ * configure.in: Don't build gas for alpha-dec-osf1*.
+
+Tue Jan 4 17:10:19 1994 Stu Grossman (grossman at cygnus.com)
+
+ * configure: Back out Per's change of 12/19/1993. It changes the
+ behavior of configure in unexpected and confusing ways.
+
+ Also, use different delim char when calculating
+ program_transform_name so that the name can contain slashes.
+
+
+ * configure.in, config.sub: Add support for VSTa micro-kernel.
+
+
+ * configure.in: Nuke hacks which were used to get a special
+ version of GAS for HPPA configurations.
+
+
+ * configure: If only ${target_alias} is given, use that
+ as the default for ${host_alias}.
+ * configure: Add missing back-slashes before nested quotes.
+
+
+ * Makefile.in (BASE_FLAGS_TO_PASS): add YACC=$(BISON)
+
+
+ * config.guess: Recognize some Tektronix configurations.
+
+
+ * config.sub: Match any flavor of SH.
+
+
+ * configure.in: Don't try to configure newlib for Alpha.
+
+
+ * configure.in: Don't build ld for Irix 5. Don't build gas,
+ libg++ or libio for any Alpha target.
+
+ * configure.in (mips*-sgi-irix5*): New target; use mh-irix5.
+ * config/mh-irix5. New file for Irix 5.
+
+
+ * Makefile.in (GZIPPROG): Renamed from GZIP, which gzip uses for
+ default arguments -- so it tried to compress itself.
+
+
+ * configure.in (notsupp): ensure that a space is always at the end
+ of the configdirs list, since the grep checks for an explicit space
+
+
+ * configure.in (target i386-sysv4.2): don't build ld, since static
+ versions of many libraries are not available.
+
+
+ * config.guess: Recognize Apollos (using environment variables).
+ * configure.in: Don't configure ld, binutils, or gprof for Apollo.
+
+
+ * config.guess: Recognize Sony news mips running newsos.
+
+
+ * Makefile.in (all-cygnus, build-cygnus): "fi else" needs to be
+ "fi ; else" for bash.
+
+
+ * Makefile.in (BASE_FLAGS_TO_PASS): pass SHELL.
+
+
+ * config.sub: accept unixware as an alias for svr4.2.
+ Fix some inconsistancies with the gcc version.
+
+
+ * Makefile.in (DISTDOCDIRS): Add gdb.
+
+
+ * Makefile.in (DISTDOCDIRS): Add libg++ and libio.
+
+
+ * Makefile.in (taz): Only build "info" in DISTDOCDIRS.
+ (DISTDOCDIRS): Don't assume libg++ and gdb folks necessarily want
+ this now.
+
+
+ * config.sub: Accept hiux* as an OS name.
+
+ * Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS per
+ etc/make-stds.texi. The underscore came from gcc, and dje now
+ agrees that RUNTESTFLAGS is the correct name.
+
+
+ * install.sh: Remove 'set -e'. It makes any conditionals
+ in the script useless.
+
+ * config.guess: Automatically recognize arm-acorn-riscix
+
+
+ * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
+
+
+ * Makefile.in (DISTDOCDIRS): New variable.
+ (taz): Edit local Makefile.in sooner, instead of proto-toplev
+ Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS.
+
+
+ * configure.in (hppa target): check the source directory for the
+ pagas sub-directory
+
+
+ * config.sub: Allow -aout* and -elf*.
+
+
+ * configure.in: Don't build ld on i386-solaris2, same as for
+ sparc-solaris2.
+
+
+ * Makefile.in (taz): Add texinfo/lgpl.texinfo (for libg++).
+
+
+ * configure.in: Configure gdb for alpha.
+
+
+ * Makefile.in (CXXFLAGS): Add -O.
+
+
+ * config.guess: added support for DG Aviion
+
+
+ * configure.in: Produce warning message for subdirectories not
+ configurable for this host/target combination. Don't try to
+ configure gdb for vms.
+
+
+ * Makefile.in (taz): Replace "byacc" with "bison -y" in the
+ appropriate files before making "diststuff".
+ (DISTBISONFILES): New var: list of files to be edited.
+ (DISTSTUFFDIRS): Add binutils.
+
+
+ * config.sub: also handle mipsel and mips64el (for little endian mips)
+
+
+ * configure.in: Add * to end of all OS names.
+
+
+ * configure.in: Build newlib for LynxOS native.
+
+
+ * config.guess: Add support for delta 88k running SVR3.
+
+ * configure.in: Add comment about HP compiler vs. emacs.
+
+
+ * configure.in: don't build ld on solaris2 (not a viable option
+ due to bugs in getpwnam & getpwuid)
+
+
+ * configure.in: Accept alpha-dec-osf1*, not just -osf1, since
+ config.guess will produce a full version number.
+
+
+ * configure.in: Build linker and binutils for alpha-dec-osf1.
+
+
+ * Makefile.in: Remove -O from CXXFLAGS for consistency with CFLAGS,
+ and gdb/testsuite/Makefile.in.
+
+
+ * configure.in: recognize mips*- instead of mips-
+
* config.sub: Accept linux*coff and linux*elf as operating
if gas and ld are in the source tree and are in ${configdirs}.
If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
the --with options (but still pass them down on the command line,
- if they were explicitly specified).
+ if they were explicitly specified).
Fri Jun 4 13:30:42 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* Makefile.in: install gcc, do installation of $(INSTALL_MODULES)
- with $(FLAGS_TO_PASS) on the command line
+ with $(FLAGS_TO_PASS) on the command line
* config.sub: Recognize lynx and lynxos
Wed Jun 2 18:19:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* Makefile.in (install-no-fixedincludes): install gcc last, so
- that rebuilds that might happen during 'make install' don't get
+ that rebuilds that might happen during 'make install' don't get
bogus gcc include files
* Makefile.in: added the vault-install target
* configure.in: actually use the Sun3 makefile fragment that's in
- config, also added the release dir to configdirs
+ config, also added the release dir to configdirs
- + Add Convex, Cray/Unicos, and Encore/Multimax support.
+ + Add Convex, Cray/Unicos, and Encore/Multimax support.
+ Execute ./dummy instead of assuming . is in PATH.
- * Makefile.in: added h8300sim
+ * Makefile.in: added h8300sim
* configure.in: split the configdirs list into 4 categories (native
v. cross, library v. tool) and handle the cross-only and native-
- only in more reasonable (and correct!) way.
+ only in more reasonable (and correct!) way.
Mon Dec 14 17:04:22 1992 Stu Grossman (grossman at cygnus.com)
Sun Dec 13 00:37:26 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
- * Makefile.in: extensive cleanup:: removed all of the explicit
- clean-* targets, collapsed many wrappers around subdir_do into
+ * Makefile.in: extensive cleanup:: removed all of the explicit
+ clean-* targets, collapsed many wrappers around subdir_do into
one, added additional targets to satisfy standards.texi, deleted
some old targets, some changes for consistency
* config/mh-solaris: rework standard X location to use
$OPENWINHOME, if defined.
-
+
* config/mh-sun: handle X11 include locations
* config/mh-decstation: define NeedFunctionPrototypes to 0, to
Sun Jul 19 17:49:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* configure.in: rearrange the parts that remove programs from
- configdirs, based now on HOST==TARGET or by canonical triple.
+ configdirs, based now on HOST==TARGET or by canonical triple.
Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
- * config.sub: Add stratus configuration frags. Also
+ * config.sub: Add stratus configuration frags. Also
submitted to FSF.
Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
* configure: added PWD as a stand in for `pwd` (for speed). use
elif wherever possible. make -srcdir work without -objdir.
- -objdir= commented out.
+ -objdir= commented out.
Thu Dec 5 22:46:52 1991 K. Richard Pixley (rich at rtl.cygnus.com)
* Freshly created ChangeLog.
+\f
+Local Variables:
+version-control: never
+End:
projects / binutils.git / blobdiff