+
+ * mips-tdep.c (mips_push_arguments): Use 128-bit stack frame
+ alignment for inferior calls.
+
+
+ * mn10200-tdep.c (mn10200_analyze_prologue): Fix calculation
+ of jsr target address.
+
+
+ * config/mn10200/tm-mn10200.h (SAVED_PC_AFTER_CALL): Don't
+ zero upper byte of address.
+
+
+ * rs6000-tdep.c (pop_dummy_frame): use memcpy.
+ (push_arguments): use memset.
+ (various other places): fix up indentation and long lines.
+
+
+ * configure.in: s/lXext/-lXext/ for Jillian's change.
+
+
+ * source.c (find_source_lines): fix indentation.
+
+ * config/mips/tm-irix5.h: Modify to work better on irix 6, by
+ making FP registers 8 bytes instead of 4.
+ REGISTER_BYTES: redefine. REGISTER_BYTE(): redefine.
+ REGISTER_VIRTUAL_TYPE: redefine. MIPS_LAST_ARG_REGNUM: redefine.
+ * irix5-nat.c (fetch_core_registers): read 8 bytes per FP register.
+ * mips-tdep.c (FP_REGISTER_DOUBLE): new macro to distinguish
+ targets with 8-byte FP registers (don't use TARGET_MIPS64).
+ (STACK_ARGSIZE): new macro, how much space is taken up on the
+ stack for each function argument (don't use TARGET_MIPS64).
+ (mips_push_arguments): modify logic to work better on Irix 6
+ (n32 ABI).
+
+
+ * configure.in: Add -lXext to mips_extra_libs
+ * configure: Regenerated.
+
+
+ * symtab.c (find_line_pc): assumed that a PC of 0 is illegal.
+ Changed to pass PC as arg and return 1 if valid (0 otherwise).
+ symtab.h: change prototype to match
+ symtab.c (find_line_pc_range): use new interface
+ breakpoint.c (resolve_sal_pc): ditto
+ gdbtk.c (gdb_set_bp): ditto
+
+
+ * parse.c (target_map_name_to_register): Check target specific
+ aliases *first* so that it can over-ride architectural names
+
+
+ * remote-sds.c (sds_start_remote): Fix printf call.
+
+
+ * mn10200-tdep.c (mn10200_analyze_prologue): Fix null pointer
+ crash when in "start".
+
+
+ * dbxread.c: reset function_start_offset after a finishing N_FUN
+ is seen.
+ * remote-sim.c: allow TARGET_REDEFINE_DEFAULT_OPS to override
+ target vectors as needed.
+
+
+ * partial-stab.h: 'F' and 'f' type N_FUN psymbols should pass
+ CUR_SYMBOL_VALUE as CORE_ADDR instead of long
+ * buildsym.[ch]: export pending_blocks list
+
+
+ * remote.c : Fix remote help string to match that of help.exp.
+
+
+ * configure.in (LIBS): Add -lw to the list of libraries if needed.
+
+
+ * btowc.c: Removed.
+ * configure.in: Don't see if we need to replace btowc().
+ * Makefile.in: Don't include LIBOBJS.
+ * configure: Regenerated.
+ * gnu-regex.c (regex_compile): Only support i18n [:foo:] if
+ we have btowc().
+
+
+ * c-exp.y: Fix problems with parsing "'foo.bar'::func". Some languages
+ allow symbols with dots.
+
+ * gdbtypes.c (check_stub_method): Cosmetic. Use more descriptive
+ names for parameters.
+
+start-sanitize-java
+ * jv-exp.y: Parser now accepts primitive types.
+ * (parse_number): Use correct ifdef for scanf long double support.
+ * jv-lang.c (java_array_type): Initial cut at array support.
+
+end-sanitize-java
+ * language.c language.h (set_language): Now returns previous language.
+
+ * symtab.c (find_methods): Make static. Cosmetic changes, including
+ indentation, and adding descriptive comments. Move local variable defs
+ into the block they are used in.
+ * Don't call check_stub_method any more. Use gdb_mangle_name to
+ generate the full method name. find_method doesn't need all the other
+ goobldegook that check_stub_method does.
+ * (gdb_mangle_name): Use more descriptive names for parameters. Fix
+ comment.
+start-sanitize-java
+ * (lookup_partial_symbol lookup_block_symbol): Check for java to
+ ensure we can find mangled names.
+end-sanitize-java
+ * (decode_line_1): Move local variable defs into the block they are
+ used in. (Improves code readability.)
+
+
+ * gdbtypes.c (get_discrete_bounds): Assign unsigned type flag for
+ all-positive enum.
+ (create_set_type): Ditto for all-positive set values.
+ * values.c (unpack_field_as_long): Check for typedef in struct
+ field unpacking.
+
+
+ * configure.in: Add some tests for gnu-regex.c's benefit.
+ See if btowc() function is provided in C library.
+ * configure, config.in: Regenerated.
+ * Makefile.in (CLIBS, CDEPS): Add @LIBOBJS@ to build btowc.c
+ if necessary.
+ * btowc.c: New file.
+
+ * gnu-regex.c: Reorder wchar.h and wctype.h includes for Solaris'
+ benefit.
+ Drop namespace preserving defines for now.
+
+
+ * gnu-regex.c: Include "gnu-regex.h", not "regex.h".
+
+
+ * gnu-regex.c, gnu-regex.h: Change LGPL license to GPL license
+ to stay consistent with the rest of GDB.
+
+
+ * gnu-regex.c, gnu-regex.h: Update to current FSF (glibc) versions.
+
+
+ * printcmd.c (disassemble_command): move overlay mapping code
+ "up" into find_pc_partial_function.
+ * blockframe.c (find_pc_partial_function): adjust start address
+ and end address for overlays (mapped vs. unmapped addresses),
+ so that all callers of this function may benefit.
+ * m32r-tdep.c (m32r_skip_prologue): adjust indentation.
+
+
+ * objfiles.c (add_to_objfile_sections): All targets to define
+ TARGET_KEEP_SECTION to permit them to retain bfd sections that
+ GDB would otherwise have discarded.
+
+
+ * dbxread.c (read_dbx_symtab): Don't lower texthigh for last psymtab.
+
+
+ * remote.c (init_extended_remote_ops): Make extended_remote_ops
+ by copying from remote_ops, move it and init_remote_ops to
+ usual place at end of file, remove "void" from arg lists.
+
+
+ * sparc-tdep.c (sparc_fix_call_dummy): Byte-swap the call dummy
+ on bi-endian machines.
+ (sparc_extract_return_value): Handle values smaller than int on
+ machines with little-endian data.
+ (sparc_target_architecture_hook): Set bi_endian flag.
+
+
+ * printcmd.c (disassemble_command): Fix off-by-one error for
+ disassembling functions in unmapped overlay sections.
+
+
+ * remote.c: merged.
+
+ (print_packet, remote_packet_command): New functions.
+ (_initialize_remote): Register the remote-packet command.
+ (_initialize_remote): remote-compare is now
+ compare-sections.
+ (remote_compare_command): added warning, issued in case
+ of mismatch only.
+
+
+ * remote.c (remote_compare_command): New function, new command.
+ Compare object file binary image with corresponding memory on
+ remote target. Report differences.
+
+
+ * sparc-tdep.c (sparc_target_architecture_hook): Set target
+ byte order only when it's selectable.
+
+
+ * sparc-tdep.c (sparc_target_architecture_hook): New function to
+ set endianness based on machine type.
+ (_initialize_sparc_tdep): Initialize target_architecture_hook.
+ (sparc_print_register_hook): Print PSR and FPSR in fancy format
+ on 32-bit machines.
+ * config/sparc/tm-sparc.h (PRINT_REGISTER_HOOK): Redefine to
+ call sparc_print_register_hook instead of using inline code.
+ * config/sparc/tm-sp64.h (PRINT_REGISTER_HOOK): Remove.
+
+
+ * main.c (main): Check for NULL from getenv on CYGWIN32.
+
+
+ * monitor.c (monitor_vsprintf): Handle %%. Patch courtesy of
+
+
+ * mips-tdep.c (mips_push_dummy_frame): Fix calculation of
+ PROC_REG_OFFSET and PROC_FREG_OFFSET.
+
+
+ * config/v850/tm-v850.h (REGISTER_BYTE): FP_REGNUM and
+ FP_RAW_REGNUM use the same register location.
+
+ * v850-tdep.c (v850_scan_prologue): Use FP_RAW_REGNUM instead of
+ FP_REGNUM.
+ (v850_frame_chain): Ditto.
+
+ * config/v850/tm-v850.h (REGISTER_NAMES): Add "fp".
+ (NUM_REGS): Update.
+ (FP_REGNUM): Update.
+ (FP_RAW_REGNUM): Define.
+
+
+ * main.c (main): Convert the path returned from getenv to a posix
+ path on cygwin32 hosts.
+
+
+ * remote.c (remote_open_1): If an error occurs starting the remote,
+ pop the target AND return.
+
+
+ * dwarf2read.c (read_subroutine_type): Set TYPE_FLAG_PROTOTYPED
+ on C++ functions.
+ * valops.c (value_arg_coerce): Add new argument to indicate whether
+ the function has a prototype, handle integer and float promotions
+ accordingly.
+ (call_function_by_hand): Always call value_arg_coerce, pass down
+ prototype information.
+
+
+ * remote.c (_initialize_remote): Typo extended__remote
+
+
+ * gnu-nat.c (init_gnu_ops): Initialization of target ops by assignment.
+ (_initialize_gnu_nat): Call new init
+ * mac-nat.c (init_child_ops): Ditto.
+ (_initialize_mac_nat): Ditto.
+ * monitor.c (init_base_monitor_ops): Ditto.
+ (_initialize_remote_monitors): Ditto.
+ * ppc-bdm.c (init_bdm_ppc_ops): Ditto.
+ (_initialize_bdm_ppc): Ditto.
+ * remote-adapt.c (init_adapt_ops): Ditto.
+ (_initialize_remote_adapt): Ditto.
+ * remote-array.c (init_array_ops): Ditto.
+ (_initialize_array): Ditto.
+ * remote-bug (init_bug_ops): Ditto.
+ (_initialize_remote_bug): Ditto.
+ * remote-e7000.c (init_e7000_ops): Ditto.
+ (_initialize_remote_e7000): Ditto.
+ * remote-eb.c (init_eb_ops): Ditto.
+ (_initialize_remote_eb): Ditto.
+ * remote-es.c (init_es1800_ops): Ditto.
+ (init_es1800_child_ops): Ditto.
+ (_initialize_es1800): Ditto.
+ * remote-hms.c (init_hms_ops): Ditto.
+ (_initialize_remote_hms): Ditto.
+ * remote-mm.c (init_mm_ops): Ditto.
+ (_initialize_remote_mm): Ditto.
+ * remote-nindy.c (init_nindy_ops): Ditto.
+ (_initialize_nindy): Ditto.
+ * remote_nrom.c (init_nrom_ops): Ditto.
+ (_initialize_remote_nrom): Ditto.
+ * remote-os9k (init_rombug_ops): Ditto.
+ (_initialize_remote_os9k): Ditto.
+ * remote-rdi.c (init_rdi_ops): Ditto.
+ (_initialize_remote_rdi): Ditto.
+ * remote-rdp.c (init_remote_rdp_ops): Ditto.
+ (_initialize_remote_rdp): Ditto.
+ * remote-sds.c (init_sds_ops): Ditto.
+ (_initialize_remote_sds): Ditto.
+ * remote-sim.c (init_gdbsim_ops): Ditto.
+ (_initialize_remote_sim): Ditto.
+ * remote-st.c (init_st2000_ops): Ditto.
+ (_initialize_remote_st2000): Ditto.
+ * remote-udi.c (init_udi_ops): Ditto.
+ (_initialize_remote_udi): Ditto.
+ * remote-vx.c (init_vx_ops): Ditto.
+ (init_vx_run_ops): Ditto.
+ (_initialize_vx): Ditto.
+ * remote.c (init_remote_ops): Ditto.
+ (init_extended_remote_ops): Ditto.
+ (_initialize_remote): Ditto.
+ * sparcl-tdep.c (init_sparclite_ops): Ditto.
+ (_initialize_sparcl_tdep): Ditto.
+ * v850ice.c (init_850ice_ops): Ditto.
+ (_initialize_v850ice): Ditto.
+ * win32-nat.c: (init_child_ops): Ditto.
+ (_initialize_inftarg): Ditto.
+
+
+ * ax-gdb.c (const_var_ref): Don't handle function names. I don't
+ want to implement all the "usual unary conversion" rules for
+ constants.
+ (gen_usual_unary): Turn "function" values into "pointer to
+ function" values, in accordance with ANSI.
+ (gen_deref): Don't do the usual unary conversions here. Let the
+ caller do it. Note that dereferencing a function pointer yields
+ a function designator, which we call an rvalue, not an lvalue.
+ (gen_address_of): Handle functions specially.
+ (gen_struct_ref): Perform the usual unary conversions before
+ calling gen_deref.
+ (gen_expr): In case for the prefix '*' operator, call
+ gen_usual_unary manually.
+
+
+ * mips/tm-tx39.h (MIPS_DEFAULT_FPU_TYPE): Defined as MIPS_FPU_NONE.
+ * mips/tm-tx39l.h: Same.
+
+
+ * m32r-tdep.c: (decode_prologue): Handle frames compiled with -Os.
+ Split out as separate function called by skip prologue and scan
+ prologue. new formula handles optimization in which the prologue
+ is interleaved with the body of the function. Also recognizes new
+ variations of prologue encoding. Use of frame pointer is
+ essential to debugging, -fno-omit-frame-pointer
+ (m32r_skip_prologue): Call decode prologue, ignore line info
+ (m32r_scan_prologue): Call decode prologue, ignore line info.
+
+
+ * w89k-rom.c (_initialize_w89k): Call new init function
+ (init_w89k_cmds): Convert to dynamic initialization of monitor_ops
+ data structure for forward compatability with additions to the
+ data structure.
+ * dbug-rom.c (_initialize_dbug_rom): ditto
+ (init_dbug_cmds): ditto
+ * m32r-rom.c (_initialize_m32r_rom): ditto
+ (init_m32r_cmds): ditto
+
+
+ * tracepoint.c (memrange_cmp): use const void * args to avoid
+ ANSI compiler warnings.
+
+
+ * ax-gdb.c (gen_fetch, gen_var_ref, gen_deref, find_field,
+ gen_bitfield_ref, gen_expr): Call error, not abort.
+ * ax-general.c (read_const, generic_ext, ax_trace_quick,
+ ax_label, ax_const_d, ax_reg, ax_print): Same.
+
+ * tracepoint.c: Remove the $(...) syntax for memranges.
+ (validate_actionline, encode_actions, trace_dump_command): Remove
+ clauses for the $(...) syntax.
+ (parse_and_eval_memrange): Function deleted.
+ (_initialize_tracepoint): Update function description.
+
+ * gdbtk.c (struct wrapped_call_objs): Change the `func' member to
+ be a Tcl_ObjCmdProc, not an Tcl_CmdProc, since it accepts a vector
+ of objects as arguments. Change the object vector to be const,
+ since that's what all the users of this structure seem to expect.
+ (call_obj_wrapper): Cast clientData properly before storing it in
+ the wrapped_args structure.
+
+ * ax-gdb.c (_initialize_ax_gdb): Make the "agent" command a
+ subcommand of "maintenance", as it should have been from the
+ beginning. #include "gdbcmd.h", to get the declaration for
+ maintenancelist.
+ * Makefile.in: Document that dependency.
+
+
+ * tracepoint.c (get_tracepoint_by_number): new function, to access
+ traceframe_number for use of the GUI.
+
+ * tracepoint.h: added prototype for get_traceframe_number.
+
+
+ * dbxread.c (process_one_symbol): If block addresses are relative to
+ function start addresses, reset function_start_address whenever a new
+ source file is seen.
+
+
+ * tracepoint.c (get_tracepoint_by_number): make sure to advance
+ arg pointer even if we fail to parse a useful number. Otherwise,
+ since this function is called in a loop, it may loop forever!
+ Also change strtol call to allow arbitrary radix.
+ (map_args_over_tracepoints (and other places)): add QUIT; call
+ to loop, to allow breakout using control-C. Not all loops were
+ analyzed to make sure they could terminate cleanly, but even
+ terminating with a messed-up tracepoint list would be better
+ than not terminating at all!
+ (tdump_command): check to see if we're connected to a trace-
+ capable target (currently only "remote") before doing anything
+ else.
+
+start-sanitize-d30v
+
+ * config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into
+ frame struct before extracting saved register offsets.
+end-sanitize-d30v
+
+
+ * tracepoint.c (encode_actions): fix typo in printf format string.
+
+
+ Implement a few more tracing operators: ^ | & ~ !
+ * ax-gdb.c (gen_integral_promotions, gen_logical_not,
+ gen_complement): New functions.
+ (gen_binop): New argument MAY_CARRY, indicating whether we need to
+ correct the upper bits of the value after performing the
+ operation. Callers changed.
+ (gen_expr): Handle BINOP_BITWISE_AND, BINOP_BITWISE_IOR, and
+ BINOP_BITWISE_XOR here as well, by calling gen_binop. Handle
+ UNOP_LOGICAL_NOT, UNOP_COMPLEMENT.
+
+ * ax-gdb.c (gen_conversion): Reworked to avoid some unnecessary
+ sign extension.
+
+ * ax-gdb.c (gen_usual_arithmetic): Renamed from gen_usual_binary,
+ to match the ANSI C standard better. Callers changed.
+
+ * ax-gdb.c (gen_traced_pop): Add prototyped declaration.
+
+
+ * tracepoint.c (stringify_collections_list): return a collection
+ of strings rather than a single string.
+ (free_actions_list): new function.
+ (encode_actions): process collection of strings returned by
+ stringify_collections_list.
+
+
+ * ax-gdb.c (gen_traced_pop): New function.
+ (gen_expr): Call it for comma operator.
+ (gen_trace_for_expr): Call it, instead of writing it out.
+
+ Add facilities for sending arbitrary packets to the remote agent.
+ There are a bunch of improvements to make (make it generic; handle
+ 'O' replies properly), but I just want to get this onto the branch.
+ * remote.c (print_packet, remote_packet_command): New functions.
+ (_initialize_remote): Register the remote-packet command.
+
+
+ * tracepoint.c: move actionline_type definition to tracepoint.h.
+ (validate_actionline): make non static.
+
+ * tracepoint.h: move actioline_type definition from tracepoint.c.
+ (validate_actionline) moved prototype from tracepoint.c.
+
+
+ * tracepoint.c (validate_actionline): add additional error
+ checking, remove some dead code.
+ (encode_actions): additional cleanups.
+ (trace_find_command): remove some dead code.
+ (trace_find_pc_command): ditto.
+ (trace_find_tracepoint_command): ditto.
+ (trace_find_line_command): ditto.
+ (trace_find_range_command): ditto.
+ (trace_find_outside_command): ditto.
+
+
+ * symtab.c (decode_line_1): set section for "break *<addr>"
+
+
+ * corefile.c (reopen_exec_file): Reopen the exec file if
+ it has changed.
+
+
+ * sparc-tdep.c (fetch_instruction): New function.
+ (single_step, sparc_init_extra_frame_info, examine_prologue):
+ Use fetch_instruction instead of read_memory_integer
+ to ensure that instructions are always read as big-endian.
+
+
+ * configure.in: Add AC_FUNC_ALLOCA.
+ * defs.h: Check HAVE_ALLOCA_H rather than sparc. Add _AIX pragma
+ alloca.
+ * configure: Rebuild.
+start-sanitize-java
+ * Makefile.in (jv-lang.o, jv-typeprint.o, jv-valprint.o): New
+ targets.
+end-sanitize-java
+
+
+ * tracepoint.c (trace_command): Remove old diagnostic code that was
+ preventing tracepoints from being defined with a full-path filename.
+
+
+ * stabsread.c (read_one_struct_field): Check for typedef in type
+ tree before clearing bitfield information.
+
+
+ * ax-gdb.c (gen_binop): New function, based on gen_mul, to replace
+ gen_mul and gen_div, and handle `%' op as well. Correctly tests
+ type of arguments.
+ (gen_expr): Factor out common code in binary arithmetic operators.
+ Add support for `%'.
+ (gen_mul, gen_div): Removed.
+
+
+ * config/sparc/tm-sp64.h (CALL_DUMMY): Store and retrieve
+ %o0-%o5 as 64-bit values; compensate for stack bias.
+ (USE_STRUCT_CONVENTION): We only pass pointers to structs
+ if they're larger than 32 bytes.
+ (REG_STRUCT_HAS_ADDR): Ditto.
+
+ * sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp()
+ instead of read_register. If the target is a sparc64 and the frame
+ pointer is odd, compensate for the stack bias.
+ (get_saved_register): Use read_sp().
+ (DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES.
+ (sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64,
+ save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers.
+ (sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC,
+ CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a
+ dummy frame.
+ (sparc_pop_frame): Use write_sp(). If the target is a sparc64 and
+ the FP is odd, compensate for stack bias.
+ (sparc_store_return_value): Right-justify the return value before
+ writing it to %o0.
+ (sparc_fix_call_dummy): Don't NOP out part of the call dummy on
+ sparc64.
+ (sparc64_read_sp, sparc64_read_fp, sparc64_write_sp,
+ sparc64_write_fp, sp64_push_arguments,
+ sparc64_extract_return_value): New functions to support the
+ sparc64 ABI.
+
+ * dwarfread.c (handle_producer): Set processing_gcc_compilation to
+ the right version number.
+
+ * dwarf2read.c (read_file_scope): Assume we're processing
+ GCC2 output.
+
+
+ * somsolib.c: Include gdb_stat.h.
+
+
+ * ax-gdb.c (gen_mul): new function; (gen_div): new function;
+ (gen_expr): add support for * and / operators, call gen_mul and
+ gen_div as appropriate.
+
+
+ * defs.h (make_run_cleanup): Declare.
+ * solib.c (find_solib): Pass correct number of arguments to
+ make_run_cleanup.
+
+
+ * tracepoint.c (trace_actions_command): actions command must set
+ step_count to zero (in case previous actions have set it but the
+ new set does not).
+
+
+ * ocd.h: Add new flags, function codes, and processor types to support
+ new Wiggler capabilities.
+ * (ocd_write_bytes_size): New function to allow atomic writes of
+ memory in sizes larger than a byte.
+
+ * ser-unix.c (baudtab): Add 57600, 115200, 230400, and 460800 baud.
+
+
+ * stabsread.c (read_one_struct_field): Do not override supplied
+ bitfield size for a range type value.
+
+ * gdbtypes.c (create_range_type): For a range with positive
+ lower limit, declare range type as unsigned.
+
+
+ * monitor.c: Turn off debug
+
+
+ * breakpoint.c (delete_command): Skip internal breakpoints when
+ all breakpoints are requested.
+
+ * stabsread.c (define_symbol): Record parameter types from Sunpro
+ function stabs in the TYPE_FIELDS of the function type.
+
+
+ * Makefile.in (config-check-targets, config-check-hosts): Removed.
+
+
+ * Makefile.in (maintainer-clean):
+ Don't get ahead of yourself and delete Makefile
+ before running `make'.
+ (local-maintainer-clean, do-maintainer-clean): New rules.
+
+
+ * ax-gdb.c (gen_add): when adding a pointer and an int, use
+ the size of the pointer, not the int (typo) to decide how
+ to extend the result.
+
+start-sanitize-vr4111
+
+ * nec4102rom.c: New file implements ROM monitor adapter for
+ nec-vr4102 board. This board hosts the vr4111 chip. This file
+ required extensions to the monitor_ops structure, hooks for wait
+ filter, new flags. This version does not support more than one
+ breakpoint and resuming after a breakpoint in 16 bit mode is
+ completely disfunctional.
+end-sanitize-vr4111
+
+ * monitor.h: Defined additional hooks for dmpregs, configure_hooks
+ and wait_filter. These additions require that all ROM monitor
+ interfaces be recoded to initialize monitor ops using assignments
+ rather than static structure initialization. Added new bits to
+ flags MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES.
+
+ * monitor.c (RDEBUG): Conditional tracing throughout the file.
+ (fromhex): Now recognized upper cse hex digits
+ (monitor_printf_noecho):
+ (monitor_readchar): Tracing interferes with input timing.
+ (monitor_open): Register different memory write functions with
+ dcache_init if MO_HAS_BLOCKWRITES.
+ (flush_monior_dcache): Added as an additional utilty.
+ (monitor-resume): Call continue hook if one has been supplied.
+ (monitor_wait_filter): New function Factored out of monitor wait
+ and used if alternate wait-filter has not been provided.
+ (monitor_wait): call alternate wait filter if provided. Call
+ monitor_dump_regs, a new function factored out from inline code.
+ (monitor_dump_block): A new function used as a utility when
+ monitors must dump several blocks of registers using different
+ commands.
+ (monitor_dump_regs): Call alternate function if provided. Uses new
+ hook in monitor.h.
+ (monitor_write_memory): Engage previouly added hook
+ MO_FILL_USES_ADDR.
+ (monitor_write_even_block): new function supports writing long
+ blocks of 4byte words.
+ (longlongendswap): new internal function
+ (monitor_write_memory_longlongs): new function writes large blocks
+ using command to enter a long long.
+ (monitor_write-memory_block): new Function figures out which block
+ mod to use.
+ (monitor_read_memory): Can now handle dump formats in which the bytes
+ preceeding the requested data is not printed.
+
+
+ * Makefile.in (GDBTKLIBS): New macro.
+ (INSTALLED_LIBS): Include GDBTKLIBS.
+ (CLIBS): Likewise.
+ * configure: Rebuilt.
+ * configure.in: Put Tcl/Tk libs into GDBTKLIBS, not LIBS.
+ (GDBTKLIBS): AC_SUBST.
+
+ * tracepoint.c (memrange_cmp): Another typo fix; `memrbnge' ->
+ `memrange'.
+
+ * tracepoint.c (memrange_cmp): Fixed typo in function intro.
+
+
+ * symfile.c (overlay_auto_command): Add forgotten parameter definitions.
+ (overlay_manual_command, overlay_off_command): Likewise.
+ (overlay_load_command): Likewise.
+ * tracepoint.c (memrange_cmp): Parameters have type void *, not
+ struct memrange *.
+
+
+ * rom68k-rom.c (_initialize_rom68k): Fix unresolved init_rom_68kcmds.
+
+
+ * config/sparc/tm-sparc.h (CALL_DUMMY): Shorten it drastically,
+ make it work on the simulator.
+ (FIX_CALL_DUMMY): Convert to function call instead of inline code.
+ (sparc_fix_call_dummy): Declare.
+ * sparc-tdep.c (sparc_fix_call_dummy): New function, taken from
+ old FIX_CALL_DUMMY macro, with additional fixes for simulator.
+ (sparc_push_dummy_frame): Set registers differently on simulator
+ to prevent corrupted register window save areas.
+
+
+ * rom68k-rom.c (_initialize_rom68k, init_rom68k_cmds):
+ Convert all static initializations of monitor ops structures to
+ executable initializations in order that additions to the data
+ structure definition can me made without repeating this editing
+ exercise.
+ * abug-rom.c (_initialize_abug_rom, init_abug-cmds): Ditto.
+ * cpu32bug-rom.c (_initialize_cpu32bug_rom, init_cpu32bug_cmds): Ditto.
+ * mon960-rom.c (initialize_mon960, init_mon960_cmds): Ditto.
+ * op50-rom.c (initialize_op50n, init_op50n_cmds): Ditto.
+ * ppcbug-rom.c (_initialize_ppcbug_rom, init_ppc_cmds): Ditto.
+ * sh3-rom.c (_initialize_sh3_rom, init_sh3_cmds): Ditto.
+ * sparclet-rom.c (_initialize_sparclet, init_sparclet_cmds): Ditto.
+ * remote-est.c (_initialize_est, init_est_cmds): Ditto.
+ * remote-hms.c ( _initialize_remote_hms, init_hms_cmds): Ditto.
+
+
+ * gdb_string.h (strdup): Don't specify arguments in prototype.
+
+
+ * rs6000-nat.c (vmap_ldinfo): Issue warning instead of error if
+ fstat on ldinfo_fd fails. Use objfile->obfd instead of vp->bfd
+ to check for reference to the same file.
+
+ * target.c (target_read_string): Handle string transfers at the
+ end of a memory section gracefully.
+
+
+ * Makefile.in: enable EXEEXT setting
+
+
+ * tracepoint.c (add_local_symbols): change type of type from
+ char to int so that type shows up as 'A' or 'L' not 0.
+
+start-sanitize-r5900
+
+ * mips-tdep.c (mips32_decode_reg_save): Handle 128bit wide
+ GPR loads/stores generated on the r5900.
+ (mips_find_saved_regs, mips32_skip_prologue): Likewise.
+ * mips/tm-r5900.h (R5900_128BIT_GPR_HACK): Define.
+ * mips/tm-txvu.h (R5900_128BIT_GPR_HACK): Likewise.
+
+end-sanitize-r5900
+
+ * README: Minor changes for 4.17 release.
+
+start-sanitize-java
+
+ * symfile.c (deduce_language_from_filename): .class implies java.
+
+end-sanitize-java
+
+ * configure.in (strerror): Check if function must be declared.
+ * acconfig.h (NEED_DECLARATION_STRERROR): New define slot.
+ * gdb_string.h (strerror): Function declaration issued if
+ NEED_DECLARATION_STRERROR.
+ * configure, config.in : Files regenerated.
+
+
+ * symfile.c (simple_overlay_update_1): Do not prefix array address
+ by `&'.
+ * bcache.h (BCACHE_DATA_ALIGNMENT): Ditto.
+ * tracepoint.c (encode_actions): Ditto.
+ * language.c, complaints.c, utils.c (varargs.h): Do not include that
+ file here, it is already included indirectly by defs.h.
+ * dbxread.c (dbx_symfile_init, process_one_symbol): Cast xmalloc return
+ value to the appropriate pointer type.
+ * utils.c (floatformat_from_doublest): Ditto.
+ * tracepoint.c (read_actions, _initialize_tracepoint): Ditto.
+ (add_memrange): Likewise with xrealloc return value.
+ * stabsread.c (ref_add): Ditto.
+ * coffread.c (coff_symfile_init): Likewise for xmmalloc return value.
+ * elfread.c (elf_symfile_read): Ditto.
+ * os9kread.c (os9k_symfile_init): Ditto.
+
+
+ * config.in: Rebuilt.
+ * acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_STPCPY, HAVE_GETTEXT,
+ HAVE_LC_MESSAGES): Define.
+
+
+ * configure: Rebuilt.
+ * configure.in: Call CY_GNU_GETTEXT.
+ * Makefile.in (top_builddir): New macro.
+ (INTL): Define to @INTLLIBS@.
+ (INTL_DEPS): New macro.
+ (CDEPS): Reference INTL_DEPS, not INTL.
+
+start-sanitize-sky
+
+ * txvu-tdep.c (txvu_print_insn): Fix thinko.
+
+end-sanitize-sky
+
+ Handle missing shared libraries during the examination of a core
+ dump gracefully.
+ * solib.c (find_solib): Use catch_errors around call to
+ solib_map_sections. Use warning instead of error if reading of
+ the shared library name fails.
+ (solib_map_sections): Change return and argument types to make
+ it callable from catch_errors.
+ (symbol_add_stub): Avoid GDB core dump if solib->abfd is NULL.
+ * irix5-nat.c, osfsolib.c (xfer_link_map_member, solib_map_sections,
+ symbol_add_stub): Ditto.
+
+
+ * Makefile.in (INTL*): Add support to link in the intl library,
+ and to add -I options to its source and object directories.
+ (INTERNAL_CFLAGS): Ditto.
+ (C{LIBS,DEPS}): Ditto.
+
+start-sanitize-sky
+ * configure.in: Add configure option --with-sim-funit.
+
+end-sanitize-sky
+
+ * mips-tdep.c (gdb_print_insn_mips): Disassemble MIPS instructions
+ with subtarget-specific `mach', rather than fixed default.
+ * config/mips/tm-mips.h (TM_PRINT_INSN_MACH): New macro, default
+ disassembly `mach'.
+start-sanitize-r5900
+ * config/mips/tm-r5900.h (TM_PRINT_INSN_MACH): Override.
+end-sanitize-r5900
+start-sanitize-sky
+ * config/mips/tm-txvu.h (TM_PRINT_INSN_MACH): Override.
+end-sanitize-sky
+
+
+ * coffread.c (decode_base_type): Treat a long field with size greater
+ than TARGET_LONG_BIT as long long.
+ * values.c (value_from_longest): Print code value in error message.
+
+
+ * gdb/gdb_string.h (strdup): Declare only if not defined as a
+ macro.
+
+
+ * procfs.c: Added replacement macros for LWP stuff. Fixed support
+ for UnixWare / SVR4.2MP targets and any targets which use
+ multi-file /proc entries. Fixed support for hardware watchpoints.
+ * solib.c: SCO needs some of the same code as SunOS. Change
+ preprocessor conditionals.
+
+ * config/i386/i386sco5.mt: New file.
+ * config/i386/tm-i386sco5.h: New file.
+ * config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o.
+ * config/i386/nm-i386v42mp.h
+ (TARGET_HAS_HARDWARE_WATCHPOINTS): define.
+ Add other macros for hardware assisted watchpoints.
+ * config/i386/nm-i386sco5.h: Correct attributions.
+ (TARGET_HAS_HARDWARE_WATCHPOINTS): define.
+ * config/i386/nm-linux.h (target_remote_watchpoint): Pass
+ 'type' through to i386_insert_watchpoint.
+
+
+ * infrun.c (wait_for_inferior): Don't add signalled processes
+ as new threads.
+ * procfs.c (wait_fd): Note if LWP has exited.
+ (procfs_wait): use GETPID to get process ID.
+
+
+ * configure.tgt: Added sparc86x support.
+
* rdi-share/etherdrv.c (EthernetWrite): Use strerror to get
* gdbcfgxref (xref_menu): Call new regex and wild card searches
- Now you can type in a specific triple like mips64-vr4320-elf or
+ Now you can type in a specific triple like mips64-vr4300-elf or
somthing like mips*.h
(triple_search) wildcardsearch): The new functions
+start-sanitize-vr4320
* configure.tgt: Switch over to use tm-4320.h. Since I switched to
MIPS EABI the fixes are no longer backward compatible with 4300.
* tm-vr4320.h: Added
* vr4320.mt: Added
+end-sanitize-vr4320
* utils.c: (warning) added call to warning_hook
* config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Use stack when
size > 8.
+
+ * tracepoint.c (get_tracepoint_by_number): change warning to note.
+ (delete_trace_command): suppress y/n query if no tracepoints, or
+ if not from_tty. (trace_pass_command): reject junk at end of args.
+ (read_actions): an action list consisting only of "end" is discarded.
+ (validate_actionline (for collect command)): an argument beginning
+ with a dollar_sign but not recognized as a special argument is
+ parsed like any other expression -- if it isn't a register name,
+ it's rejected. Also reject an empty argument to while-stepping.
+ (trace_find_command): reject a negative frame number argument.
+ (_initialize_tracepoint): set $traceframe initially to -1.
+
* rdi-share/Makefile.am, rdi-share/aclocal.m4,
* NEWS: Update for 4.17 release.
+
+ * tracepoint.c (parse_and_eval_memrange): Fix memory leaks.
+ (encode_actions): Use the new gen_trace_for_expr function
+ instead of expr_to_address_and_size; collect registers when
+ using expressions. (clear_collection_list): Fix memory leak.
+
+
+ * ax-gdb.h (gen_trace_for_expr): Add prototype.
+
+
+ * tracepoint.c (validate_actionline): Fix memory leak.
+ (encode_actions): Fix memory leak.
+
+
+ * tracepoint.c (trace_mention): New function.
+ (trace_command): Call it.
+
+
+ * ax-general.c (ax_reqs): New function.
+ * ax.h (enum agent_flaws, struct agent_reqs): New types.
+ (agent_reqs): New extern prototype. Well, actually, this was
+ there before, due to a premature checkin.
+ (struct aop_map): Add new `data_size' member.
+ * ax-general.c (aop_map): Supply its value.
+ * ax-gdb.c (agent_command): Call ax_reqs, for testing.
+
+ * ax-general.c (ax_print): If we encounter an invalid or
+ incomplete opcode, don't abort; just print an error message.
+
+ * ax-gdb.c: Generate trace bytecodes, as appropriate.
+ (trace_kludge): New variable.
+ (gen_fetch, gen_bitfield_ref): Emit trace bytecodes, if asked
+ nicely.
+ (expr_to_agent): Ask for no trace bytecodes.
+ (gen_trace_for_expr): New function.
+ (agent_command): Call it, and display the result appropriately ---
+ no struct axs_value, so no type or kind information.
+
+ * ax-gdb.c: Use TARGET_CHAR_BIT throughout, not HOST_CHAR_BIT.
+
* tracepoint.c (trace_status_command): Recognize a boolean return
value from the stub to indicate whether trace experiment is
- running. Export this value as a global state variable
+ running. Export this value as a global state variable.
(trace_running_p) for use by the GUI. (from Michael Snyder)
(trace_pass_command) added call to modify_tracepoint_hook.
- * tracepoint.h export trace_running_p
+ * tracepoint.h export trace_running_p.
+
+
+ * tracepoint.c (validate_actionline): do not error out if
+ exp->elts[0].opcode is not on short line -- let
+ expr_to_address_and_size handle it.
+
+
+ * tracepoint.c: Include "ax.h", not "agentexpr.h".
+
+ * tracepoint.c (encode_actions): Call expr_to_address_and_size,
+ not simply expr_to_agent.
+
+ * ax-general.c: Comment out code in progress, so everyone else can
+ at least compile.
+
+ * gdbtypes.c: Doc fix.
+
+ * ax.h, ax-gdb.h, ax-general.c, ax-gdb.c: New files.
+ * Makefile.in (REMOTE_OBJS): Add ax-general.o and ax-gdb.o.
+ (SFILES): Add ax-general.c, ax-gdb.c.
+ (ax_h): New variable.
+ (ax-general.o, ax-gdb.o): New rules.
start-sanitize-sky
* Makefile.in: Derive SHELL from configure.
- * config/d10v/d10v.mt config/d30v/d30v.mt config/m32r/m32r.mt
+ * config/d10v/d10v.mt config/m32r/m32r.mt
config/mn10200/mn10200.mt config/mn10300/mn10300.mt : Remove -lm
from SIM. This prevents dependency checking of -lm (under NT
native builds). (It is automatically added by configure if it
exists.)
+start-sanitize-d30v
+ * config/d30v/d30v.mt: Ditto.
+end-sanitize-d30v
* doc/configure mswin/configure nlm/configure
testsuite/gdb.base/configure testsuite/gdb.c++/configure
testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
since we now effectively poll the serial port.
Don't reset the current_timeout, either, since this member is used
by hardwire_readchar to track the timeout and call the ui_loop_hook.
- (hardwire_readchar): Poll the serial port for Cygwin32. We timeout every
- second, update the UI, and loop around doing this until we have hit the real
- timeout or we get data or an error. This will allow the UI to stay active
- while gdb is "blocked" talking to the target.
- (wait_for): Do reset current_timeout
- because it is only used to keep track of what the
- current timeout for the scb is.
+ (hardwire_readchar): Poll the serial port for Cygwin32. We timeout
+ every second, update the UI, and loop around doing this until we
+ have hit the real timeout or we get data or an error. This will
+ allow the UI to stay active while gdb is "blocked" talking to the
+ target.
+ (wait_for): Do reset current_timeout because it is only used to
+ keep track of what the current timeout for the scb is.
* top.c
- * config/mips/tm-vr4xxx.h: implements vr4111 as saparate from 4300
+start-sanitize-vr4111
+ * config/mips/tm-vr4xxx.h: implements vr4111 as separate from 4300
* config/mips/vr4xxx.tm: implements vr4111 as separate from 4300
* configure.tgt: Recognise mips64vr4111-*-elf as vr4xxx
+end-sanitize-vr4111
* dwarfread.c (read_tag_pointer_type): Pointer sizes now come from
TARGET_PTR_BIT rather from sizeof(char *) on host.
* Makefile.in (BISON): Don't even pretend to use yacc.
(c-exp.tab.o): Use bison -o to use a unique intermediate file.
- (jv-exp.tab.o, f-exp.tab.o, m2-exp.tab.o): Likewise.
+ (f-exp.tab.o, m2-exp.tab.o): Likewise.
+start-sanitize-java
+ (jv-exp.tab.o): Likewise.
+end-sanitize-java
projects / binutils.git / blobdiff