+
+ * ltcf-c.sh (archive_cmds, archive_expsym_cmds) [solaris,
+ with_gcc]: Use `gcc -shared' to build a shared library.
+
+
+ * ltcf-c.sh (archive_cmd) [hpux, with_gcc]: Use gcc to link shared
+ archives.
+
+
+ * ltcf-cxx.sh (osf3/osf4/osf5): Support creation of C++ shared
+ libraries when using g++ with native linker.
+
+
+ * ltconfig, ltmain.sh: Upgrade to libtool 1.4a 1.641.2.256.
+
+
+ * configure.in : enable ld for aix
+
+
+ * ltcf-cxx.sh (allow_undefined_flag, no_undefined_flag)
+ [aix4*|aix5*]: Prepend blank.
+
+
+ * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
+ ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.254. Rebuilt a number
+ of subdir/configure scripts to use the new libtool.m4.
+
+
+ * config.if (libc_interface): Set to -libc6.2- for cross
+ compiling to Linux/glibc 2.2.
+
+
+ * configure.in (noconfigdirs) [*-cygwin*, *-mingw*, *-beos]: Disable
+ libgcj.
+
+
+ * configure.in (noconfigdirs): Don't reset it from scratch in the
+ target case; only append to it.
+
+
+ * configure.in (noconfigdirs) [hppa*-*-*, mips*-*-irix6*,
+ sparc-*-solaris2.8]: Disable ${libgcj}.
+
+
+ * configure.in (libgcj_saved): Copy from $libgcj.
+ (libgcj): Zero out if --enable-libgcj; add to noconfigdirs is
+ --disable-libgcj.
+
+
+ * ltconfig, ltmain.sh, ltcf-cxx.sh: Upgraded to libtool 1.4a
+ 1.641.2.228.
+
+
+ * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
+ ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.226.
+
+
+ * Makefile.in (CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, RECURSE_FLAGS):
+ New macros.
+ (bootstrap, cross): Use RECURSE_FLAGS.
+ * configure.in: Subst CXX_FOR_TARGET_FOR_RECURSIVE_MAKE.
+
+
+ * configure.in (CXX_FOR_TARGET): Use xgcc for libstdc++-v3.
+
+
+ * README-maintainer-mode: Add note about inability to use "make
+ distclean" in maintainer mode.
+
+
+ Re-installed:
+ * ltcf-c.sh: Clear ac_cv_prog_cc_pic for DJGPP. Do not add
+ '-DPIC' to ac_cv_prog_cc_pic for DJGPP.
+ * ltcf-cxx.sh: Likewise.
+ * ltcf-gcj.sh: Likewise.
+
+
+ * config.sub, config.guess: Import latest from subversions.
+
+
+ * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
+ ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.198.
+
+
+ * Makefile.in: all-m4 depends on all-texinfo.
+
+
+ * Makefile.in (ALL_GCC, ALL_GCC_C, ALL_GCC_CXX): Set before use.
+
+
+ * COPYING.NEWLIB: Remove DJ Delorie's address because it is no
+ longer valid.
+
+
+ * configure.in (noconfigdirs): Allow configuration of texinfo
+ for Cygwin hosts.
+
+
+ * config.guess: Add linux target for S/390.
+ * config.sub: Likewise.
+ * configure.in: Likewise.
+
+
+ * configure: Output host type to stdout, not stderr.
+
+
+ * config.guess: Import from subversions.gnu.org (revision 1.181).
+ * config.sub: Import from subversions.gnu.org (revision 1.199).
+
+
+ * config.guess: Handle hppa64-linux systems.
+
+
+ * ltcf-cxx.sh (ac_cv_prog_cc_pic_works, ac_cv_prog_cc_static_works):
+ Don't unset, it's non-portable and no longer necessary, set to empty
+ instead.
+
+
+ * ltconfig: Shell portability fix for the tagname validity check.
+
+
+ * ltcf-cxx.sh: Use parentheses around eval $ac_compile.
+
+
+ * ltcf-c.sh (ld_shlibs) [aix5*]: Disable on unknown CPU types.
+ * ltcf-cxx.sh, ltcf-gcj.sh: Likewise.
+
+
+ * ltmain.sh (TAG disable-shared, TAG disable-static): Make sure we
+ keep at least one of build_libtool_libs or build_old_libs set to
+ yes.
+
+
+ * ltcf-gcj.sh (lt_simple_link_test_code): Remove stray `(0)'.
+ * libtool.m4 (_AC_LIBTOOL_GCJ): Pass $CPPFLAGS on.
+
+
+ * Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
+
+
+ * Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
+ files.
+
+
+ * COPYING.NEWLIB: Put into source repository.
+
+
+ * configure.in (host_tools): Add sid.
+ Always configure cgen.
+ * Makefile.in (all-sid): New target.
+ (check-sid, clean-sid, install-sid): Likewise.
+
+
+ * config.sub, config.guess: Update from subversions.
+
+
+ * configure.in: Disable language-specific target libraries for
+ languages that aren't enabled.
+
+
+ * configure.in (xscale-elf): Add target.
+ (xscale-coff): Add target.
+ (c4x, c5x, tic54x): Move after ARM targets.
+
+
+ * ltcf-gcj.sh: Added file, required by 2000-11-18 merge.
+
+
+ * ltcf-cxx.sh: Added file, required by 2000-11-18 merge.
+
+
+ * Makefile.in: Merge with GCC and libgcj.
+ (ALL_GCC_C, ALL_GCC_CXX): New macros. Use them as dependencies of
+ configure-target-<library> when their configure scripts need the C
+ or C++ library to have already been built to work properly.
+ (do_proto_toplev): Set them to an empty string.
+
+
+ * Makefile.in (HOST_LIB_PATH, TARGET_LIB_PATH): New macros.
+ (REALLY_SET_LIB_PATH): Use them.
+
+
+ * config.sub: Add support for Sun Chorus
+
+
+ * config.sub: Add support for the *-storm-chaos OS.
+
+
+ * configure.in (noconfigdirs): Don't compile some
+ of the libraries for 68HC11 & 68hc12 targets.
+
+
+ * ltconfig, ltmain.sh, libtool.m4: Updated from libtool
+ multi-language branch, to work around Solaris' /bin/sh bug. Rebuilt
+ all affected `configure' scripts.
+
+
+ * Makefile.in (DEVO_SUPPORT): Added gettext.m4, libtool.m4 and
+ ltcf-c.sh.
+
+
+ * config.sub, config.guess: Update from subversions.
+
+
+ * Makefile.in (all-zlib): Added dummy target.
+
+ * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh: Updated from libtool
+ multi-language branch.
+
+
+ * Makefile.in (all-bootstrap): Added all-texinfo and all-zlib.
+ (bootstrap*): Depend on all-bootstrap.
+
+
+ * configure.in (FLAGS_FOR_TARGET): Use -nostdinc even for Canadian
+ crosses, but add gcc/include to the header search path for them.
+
+
+ * ltconfig, ltmain.sh: Updated from libtool multi-language branch.
+ * libtool.m4, ltcf-c.sh: Copied from libtool multi-language branch.
+ * gettext.m4: New file, extracted from aclocal.m4.
+
+
+ * config-ml.in (CC, CXX): Avoid trailing whitespace.
+ (LD_LIBRARY_PATH, SHLIB_PATH): Adjust for multilibs and export to
+ sub-configures.
+
+
+ * Makefile.in (ALL_MODULES): Add all-cgen.
+ (CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
+ (all-cgen): New target.
+ (all-opcodes,all-sim): Depend on all-cgen.
+ * configure.in (host_tools): Add cgen.
+ Only configure cgen if --enable-cgen-maint.
+
+
+ * config-ml.in (CC, CXX): Don't introduce a leading space.
+
+
+ * configure.in (libstdcxx_flags): Use
+ libstdc++-v3/src/libstdc++.INC.
+
+
+ * configure.in (libstdcxx_flags): Use libstdc++-v3/src/INCLUDES.
+
+
+ * configure.in (CC_FOR_TARGET, CHILL_FOR_TARGET,
+ CXX_FOR_TARGET): Add -B$$r/gcc/ here.
+ (FLAGS_FOR_TARGET): Not here.
+ (CHILL_FOR_TARGET, CXX_FOR_TARGET): Don't check the list of languages.
+
+
+ * configure.in (FLAGS_FOR_TARGET): invert test for xgcc, should mean
+ "if we're also building gcc, and it's a gcc that will run on the
+ build machine, we want to use its includes instead of the system's
+ default includes".
+
+
+ * configure.in (libstdcxx_flags): Don't use `"'.
+
+ * config-ml.in: Adjust multilib search paths to the
+ appropriate multilib tree.
+
+
+ * configure.in (CHILL_FOR_TARGET, CXX_FOR_TARGET): Convert blanks to
+ commas in $LANGUAGES.
+
+
+ * configure.in (qCXX_FOR_TARGET): Use echo instead of expr.
+
+
+ * configure.in (qCXX_FOR_TARGET): Quote `&' characters in
+ CXX_FOR_TARGET for sed.
+
+
+ * configure.in (CC_FOR_TARGET, CHILL_FOR_TARGET, CXX_FOR_TARGET):
+ Do not override if already set in the environment or in configure.
+ Don't duplicate $(FLAGS_FOR_TARGET) if it already appears in them.
+ (FLAGS_FOR_TARGET): Don't use host directories on Canadian crosses.
+
+
+ * Makefile.in (FLAGS_FOR_TARGET): New macro.
+ (GCC_FOR_TARGET): Use it.
+ (CC_FOR_TARGET, CXX_FOR_TARGET, CHILL_FOR_TARGET): Now defined...
+ * configure.in: ... here.
+ (FLAGS_FOR_TARGET): Define. Add ld build dir to -L path.
+ (libstdcxx_flags): Define and append to CXX_FOR_TARGET.
+
+
+ * Makefile.in (configure-target-libf2c): Depend on $(ALL_GCC).
+ (configure-target-libchill, configure-target-libobjc): Likewise.
+
+ * configure.in: Use the same cache file for all target libs.
+ * config-ml.in: But different cache files per multilib variant.
+
+
+ * configure (topsrcdir): Don't use dirname.
+
+
+ * configure.in: Remove all references to libg++ and librx.
+
+ * configure, configure.in, Makefile.in: Unify gcc and binutils.
+
+
+ * config.sub: Update to subversions version 2000-07-06.
+
+
+ * configure.in (host_makefile_frag): Use mh-ia64pic on IA-64 hosts.
+ (target_makefile_frag): Use mt-ia64pic on IA-64 targets.
+
+
+ * symlink-tree: Check number of arguments.
+
+
+ * texinfo/texinfo.tex: Update to version 2000-05-28.15.
+
+
+ * Makefile.in (CXX_FOR_TARGET): Add libstdc++ to the library
+ search path for a g++ extracted from the build tree. This
+ will allow link tests run by configure scripts in
+ subdirectories to succeed.
+
* ltconfig: Add support for mips-dde-sysv4.2MP
-
+
* ltconfig: Check for host_os beeing one of `cygwin', `mingw' or
- * configure: Revert changes made on May 18 and May 19.
-
* Makefile.in (CC_FOR_TARGET): Make sure as/ld in the gcc
directory are used if they exist. Make sure
$(build_tooldir)/include is searched for header files,
(GCC_FOR_TARGET): Likewise.
(CXX_FOR_TARGET): Likewise.
-
- * configure: Provide --disable-target-dir-sanity-checking to
- disable the gcc directory checking for cross compiling.
-
-
- * configure: Ask to create the gcc directory for cross
- compiling if necessary.
-
* configure.in (hppa*64*-*-*): Do build ld for this configuration.
-
- * configure.in: Special case powerpc*-*-aix* target_makefile_frag.
-
* Makefile.in (configure-target-libiberty): Depend on
configure-target-newlib.
+
+ * configure.in, Makefile.in: Merge all libffi-related
+ configury stuff from the libgcj tree.
+
* Makefile.in (do-djunpack): New target. Update djunpack.bat with
- current version information. Add to proto-toplev directory.
+ current version information. Add to proto-toplev directory.
(gdb-taz): Build do-djunpack.
+
+ * configure.in: Special case powerpc*-*-aix* target_makefile_frag.
+
* ltmain.sh: Preserve in relink_command any environment
* djunpack.bat: Change the Sed script to replace @V@ in fnchange.lst
with the version name.
- * djunpack.bat: New file.
+ * config.if: Tweak.
- * config.sub (d30v): Add d30v as a basic machine type.
+ * djunpack.bat: New file.
* Makefile.in (taz, gdb-taz, gas.tar.bz2, binutils.tar.bz2,
- gas+binutils.tar.bz2, libg++.tar.bz2, gnats.tar.bz2, gdb.tar.bz2,
- dejagnu.tar.bz2, gdb+dejagnu.tar.bz2, insight.tar.bz2,
- insight+dejagnu.tar.bz2, newlib.tar.bz2): Pass MD5PROG to sub-make.
+ gas+binutils.tar.bz2, libg++.tar.bz2, gnats.tar.bz2, gdb.tar.bz2,
+ dejagnu.tar.bz2, gdb+dejagnu.tar.bz2, insight.tar.bz2,
+ insight+dejagnu.tar.bz2, newlib.tar.bz2): Pass MD5PROG to sub-make.
+
+
+ * config.sub (case $basic_machine): Change default for "ibm-*"
+ to "openedition".
(PACKAGE): Default to TOOL.
(VER): Default to a shell script.
(taz): Rewrite target. Move real work to do-proto-toplev. Include
- md5 checksum generation.
+ md5 checksum generation.
(do-proto-toplev): New target. Create $(PACKAGE)-$(VER) link.
(do-tar-bz2): Delete creation of $(PACKAGE)-$(VER) link.
(gdb.tar.bz2, dejagnu.tar.bz2, gdb+dejagnu.tar.bz2,
- insight.tar.bz2): Use gdb-taz to create archive.
+ insight.tar.bz2): Use gdb-taz to create archive.
* configure (warn_cflags): Delete.
- * Makefile.in (CC_FOR_TARGET): Add new winsup directory
- structure stuff to -L library search.
- (CXX_FOR_TARGET): Ditto.
-
-
- * configure.in: -linux-gnu*, not -linux-gnu.
+ * configure.in (enable_libstdcxx_v3): Add.
+ (target_libs): Add bits here to switch between libstdc++-v2 and
+ libstdc++-v3.
+ * config.if: And this file too.
+ * Makefile.in: Add libstdc++-v3 targets.
- * Makefile.in (all-gcc): Backed out the last change.
+ * config.sub (d30v): Add d30v as a basic machine type.
- * Makefile.in (all-gcc): Run ld/ld-new if necessary.
+ * configure.in: -linux-gnu*, not -linux-gnu.
(do-tar-bz2): Replace TOOL with PACKAGE.
(gdb.tar.bz2): Remove GDBTK from GDB package.
(gdb+dejagnu.tar.bz2, insight.tar.bz2, insight+dejagnu.tar.bz2,
- dejagnu.tar.bz2): New packages.
+ dejagnu.tar.bz2): New packages.
* config.guess, config.sub: Updated to match config's 2000-02-15
- version.
+ version.
* configure (gcc_version): When setting, narrow search to
lines containing `version_string'.
+
+ * config.sub: Add support for avr target.
+
+
+ * config.sub: Add mmix-knuth-mmixware.
+
+
+ * Makefile.in (CC_FOR_TARGET): Add new winsup directory
+ structure stuff to -L library search.
+ (CXX_FOR_TARGET): Ditto.
+ (CROSS_CHECK_MODULES): Fix spelling mistake.
+
+
+ * Makefile.in (CXX_FOR_TARGET): Use g++, not xgcc, to invoke
+ the C++ compiler.
+
+
+ * configure.in: Don't build some bits for beos.
+
+
+ * Makefile.in (CC_FOR_TARGET): Use newlib libraries as well
+ as include files.
+
* configure.in: Use mt-aix43 to handle *_TARGET defs,
not mh-aix43.
+
+ * config.guess (alpha-osf, alpha-linux): Detect ev67.
+ * config.sub: Accept alphaev[78], alphaev8.
+
+
+ * config.guess, config.sub: Update from autoconf.
+
+
+ * config-ml.in (sparc*-*-*): Disable sparcv9 support if the
+ necessary libraries are missing.
+
+
+ * configure: Fix quoting inside arguments of eval.
+
+
+ * config-ml.in: Allow suppression of some ARM multilibs.
+
+
+ * config.guess: Add OS/390 match pattern.
+ * config.sub: Add mvs, openedition targets.
+ * configure.in (i370-ibm-opened*): New.
+
* config.sub: Add support for configuring for pj.
* config.sub (maybe_os): Add support for configuring for fr30.
* configure.in: Do not configure or build ld for AIX
platforms. ld is known to be broken on these platforms.
+
+ * config-ml.in: Pass compiler flag corresponding to multidirs to
+ subdir configures.
+
* Makefile.in (LDFLAGS): Define.
* configure (tmpfile): Change cONf$$ to cNf$$ to avoid an overly
long file name when using DJGPP on MS-DOS.
+
+ * config.sub (vxworks case): Use os=-vxworks, not os=vxworks.
+
* Makefile.in (check-target-libio): Remove all-target-libstdc++
dependency as this causes "make check" to globally "make all"
+
+ * configure.in (target_libs): Added target-zlib.
+ * Makefile.in (ALL_TARGET_MODULES): Added zlib.
+ (CONFIGURE_TARGET_MODULES): Likewise.
+ (CHECK_TARGET_MODULES): Likewise.
+ (INSTALL_TARGET_MODULES): Likewise.
+ (CLEAN_TARGET_MODULES): Likewise.
+ (configure-target-zlib): New target.
+ (all-target-zlib): Likewise.
+ (all-target-libjava): Depend on all-target-zlib.
+ (configure-target-libjava): Depend on configure-target-zlib.
+
+ * Makefile.in (configure-target-libjava): Depend on
+ configure-target-newlib.
+ (configure-target-boehm-gc): New target.
+ (configure-target-qthreads): New target.
+
+ * configure.in (target_libs): Added target-qthreads.
+ * Makefile.in (ALL_TARGET_MODULES): Added qthreads.
+ (CONFIGURE_TARGET_MODULES): Likewise.
+ (CHECK_TARGET_MODULES): Likewise.
+ (INSTALL_TARGET_MODULES): Likewise.
+ (CLEAN_TARGET_MODULES): Likewise.
+ (all-target-qthreads): New target.
+ (configure-target-libjava): Depend on configure-target-qthreads.
+ (all-target-libjava): Depend on all-target-qthreads.
+
+ * Makefile.in (ALL_TARGET_MODULES): Added libjava, boehm-gc.
+ (CONFIGURE_TARGET_MODULES): Likewise.
+ (CHECK_TARGET_MODULES): Likewise.
+ (INSTALL_TARGET_MODULES): Likewise.
+ (CLEAN_TARGET_MODULES): Likewise.
+ (all-target-libjava): New target.
+ (all-target-boehm-gc): Likewise.
+ * configure.in (target_libs): Added libjava, boehm-gc.
+
* Makefile.in (binutils.tar.bz2): Don't pass makeall.bat and
* config.guess (ppc-*-linux-gnu): Also use ld emul elf32ppclinux.
+
+ * config.guess (dummy): Changed to $dummy.
+
- * config.sub: Updated to match latest EGCS version.
+ * config.sub: Tidied up case statements.
+
+
+ * config.guess: Handle NEC UX/4800. Contributed by Jiro Takabatake
+
+ * config.guess: Merge with FSF version. Future changes will be
+ more accurately recorded in this ChangeLog.
+ * config.sub: Likewise.
+
+
+ * Makefile.in (GCC_FOR_TARGET): Add -I$(build_tooldir)/include.
(noconfigdirs): Don't build any bsp stuff for for arm-oabi targets.
Bad merge removed these two changes.
+
+ * config.guess (interix Alpha): Add.
+
* configure.in (i?86-*-beos*): Do config gperf; don't config
gdb, newlib, or libgloss.
+
+ * config-ml.in: On mips*-*-*, if multidirs contains mabi=64, try to
+ link a trivial program with -mabi=64. If it fails, remove mabi=64
+ from multidirs.
+
+
+ * config.sub: Set basic_machine to i586 when target_alias = k6-*.
+
* config.sub: Add support for mcore targets.
* configure.in: Added bsp support to arm-*-coff and arm-*-elf
- targets.
+ targets.
-
+
* config.guess: Modified to recognize uname's armv* syntax.
* config.sub: Modified to recognize uname's armv* syntax.
* config.sub: Add support for strongarm target.
-
+
* configure.in (*-*-cygwin32*): Use config/mh-cygwin instead of
the old name config/mh-cygwin32.
Enable texinfo.
$AR_FOR_TARGET. Likewise for RANLIB.
-
+
* config.sub (oabi): Recognize.
* configure.in (arm-*-oabi): Handle.
* Makefile.in: Add libtermcap target.
* config/mt-cygwin: New file. libtermcap target info.
-
- * configure.in: Add cygmon for x86-coff and x86-elf. Configure
- cygmon for all sparclite targets, regardless of object format.
-
-
- * configure.in: Added target-bsp for several target architectures.
-
- * Makefile.in: Added rules for bsp.
-
* config.sub: Clean up handling of hppa2.0.
* config.sub: Handle hppa2.0.
+
+ * configure.in: Add cygmon for x86-coff and x86-elf. Configure
+ cygmon for all sparclite targets, regardless of object format.
+
+
+ * configure.in: Added target-bsp for several target architectures.
+
+ * Makefile.in: Added rules for bsp.
+
* config.guess: Improve detection of hppa2.0 processors.
directory is "unwanted".
* Makefile.in ($(CONFIGURE_TARGET_MODULES)): Likewise.
-
* ltconfig: import from libtool, after changing libtool to
cygwin* instead of cygwin32*.
* config.sub: Check cygwin* instead of cygwin32*.
+
+ * config.guess: Match any version of Unixware7.
+
* Makefile.in configure.in: Add the ability to use tcl8.1 and tk8.1
* Makefile.in (DEVO_SUPPORT): Add config.if.
+
+ * configure: Add pattern to replace "build_tooldir"'s
+ definition in the generated Makefile with "tooldir"'s
+ actual value.
+
* config.sub: Bring back lost sparcv9.
+ * Makefile.in (all-snvavigator): Remove all-flexlm dependency.
+
+
+ * Makefile.in (CHILL_FOR_TARGET): Mirror recent changes to
+ CC_FOR_TARGET and friends.
+
+
+ * Makefile.in (build_tooldir): New variable, same as tooldir.
+ (CC_FOR_TARGET, GCC_FOR_TARGET, CXX_FOR_TARGET): Add
+ -B$(build_tooldir)/bin/.
+ (BASE_FLAGS_TO_PASS): Pass build_tooldir down.
+
* config.sub: Add support for i[34567]86-pc-udk.
tools module
* configure.in: ditto
+
+ * Makefile.in (TARGET_CONFIGDIRS): Add libobjc.
+ (ALL_TARGET_MODULES): Add all-target-libobjc.
+ (CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES): Similarly.
+ (INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES): Similarly.
+ (all-target-libchill): Add dependencies.
+ * configure.in (target_libs): Add libchill.
+
- * configure.in (target_subdir): Remove duplicate line.
+ * configure.in (target_subdir): Remove duplicate line.
* Makefile.in (bootstrap): Pass TARGET_FLAGS_TO_PASS to `make all'.
-
* config.sub: Fix typo in last change.
- * Makefile.in (taz): Try "chmod -R og=u ." before
+ * Makefile.in (taz): Try "chmod -R og=u ." before
"chmod og=u `find . -print`".
- * configure.in: Add arm-elf and thumb-elf support.
+ * configure.in: Add arm-elf and thumb-elf support.
* configure.in (noconfigdirs): Add configure pattern for mips tx39
- cygmon
+ cygmon
- * Makefile.in (local-clean): remove *.log
- (warning.log): built with warn_summary from build.log
- (mail-report.log): run test_summary
- (mail-report-with-warnings.log): run test_summary including
- warning.log in the report
+ * Makefile.in (local-clean): Remove *.log.
+ (warning.log): Built with warn_summary from build.log.
+ (mail-report.log): Run test_summary.
+ (mail-report-with-warnings.log): Run test_summary including
+ warning.log in the report.
* Makefile.in (boostrap2-lean, bootstrap3-lean,
- bootstrap4-lean): new targets
+ bootstrap4-lean): New targets.
+
+
+ * mpw-* Delete. Not used.
- * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end;
- Solaris `make' causes it to continue to next definition.
+ * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end;
+ Solaris `make' causes it to continue to next definition.
* config.sub: Recognize sparc86x.
-
+
* configure.in (--enable-target-optspace): Remove debug echo.
(all-gprof): Likewise.
(all-ld): Likewise.
-
* configure.in (host_tools): Fix typo, lbtool -> libtool.
* ltconfig: Add cygwin32 support.
* Makefile.in, configure.in: Add libtool as a native only directory
- to configure and build.
+ to configure and build.
+
+
+ * Makefile.in (INSTALL_MODULES): Remove texinfo.
* configure: Do not disable building gdbtk for cygwin32 hosts.
+
+ * configure.in: Add thumb-coff target.
+ * config.sub: Add thumb-coff target.
+
* Makefile.in: Revert yesterday's change.
- * Makefile.in (TARGET_CONFIGDIRS, ALL_TARGET_MODULES,
- CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES,
- INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES, all-target-winsup):
+ * Makefile.in (TARGET_CONFIGDIRS, ALL_TARGET_MODULES,
+ CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES,
+ INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES, all-target-winsup):
Remove references to librx and libg++.
* configure.in: Add Thumb-pe target.
+
* Makefile.in - changed sn targets to snavigator
* configure.in - changed sn targets to snavigator
* configure.in: Revert 3 Jan change for powerpc-linux-gnulibc1.
-
* config.sub (sco5): Fix typo.
* configure.in: Remove libgloss from noconfigdirs for MN10300.
-
- * configure: Don't let builds be done in source tree.
-
* configure.in: Don't build libgui for a cygwin32 target when not on
* config.sub: Add tic30 cases, and map c30 to tic30.
+
+ * Makefile.in (TARGET_CONFIGDIRS): Add libf2c.
+ (ALL_TARGET_MODULES, CONFIGURE_TARGET_MODULES): Similarly
+ (CHECK_TARGET_MODULES, INSTALL_TARGET_MODULES): Similarly
+ (CLEAN_TARGET_MODULES): Similarly
+ (all-target-libf2c): Add dependences.
+ * configure.in (target_libs): Add libf2c.
+
- * configure.in: Remove expect from noconfigdirs when target
- is cygwin32. OK to build expect and dejagnu with Canadian
- Cross.
+ * configure.in: Remove expect from noconfigdirs when target
+ is cygwin32. OK to build expect and dejagnu with Canadian
+ Cross.
${package_makefile_frag} to where it should be according
to the comment.
* config.guess: Add support for Linux/ARM.
- * configure.in: check whether host and target makefile
- fragments exist before adding them to *_makefile_frag
+ * configure.in: Check whether host and target makefile
+ fragments exist before adding them to *_makefile_frag.
* configure.in (target_configdirs): Add cygmon for sparc64-elf.
-
+
* configure.in: Make sure we only replace RPATH_ENVVAR on
* config.sub: Add mingw32 support.
* configure.in: Likewise.
- * mh-mingw32: New file.
+ * config/mh-mingw32: New file.
* config.guess: Sync with egcs. Picks up new alpha support,
BeOS & some additional linux support.
* config.guess: HP 9000/803 is a PA1.1 machine.
+
+ * configure.in: It's alpha*-...
- * configure.in (host_makefile_frag, target_makefile_frag):
- Handle multiple config files.
- (alpha-*-linux*): Treat alpha-*-linux* as alpha-*-linux* and
- alpha-*-*.
+ * configure.in (host_makefile_frag, target_makefile_frag):
+ Handle multiple config files.
+ (alpha-*-linux*): Treat alpha-*-linux* as alpha-*-linux* and
+ alpha-*-*.
* Makefile.in, configure, configure.in, ChangeLog: merge with foundry's
- 11/18/97 build
+ 11/18/97 build
* configure.in (d30v): Remove tcl, tk, expect, gdb, itcl, tix, db,
- sn, and gnuserv from noconfigdirs.
+ sn, and gnuserv from noconfigdirs.
-* Makefile.in (cross): New target.
+ * Makefile.in (cross): New target.
* Makefile.in (bootstrap2, bootstrap3): New targets.
(all-bootstrap): Remove outdated and confusing target.
* configure (tooldir): enable_gdbtk=YES for cygwin32, NO for
- windows. Consistent with gdb/configure.
-
+ windows. Consistent with gdb/configure.
* config/mh-cygwin32: ok to build split texinfo files
-
+
* configure.in: remove bison from noconfigdirs for Cygwin32 host
* config.guess: Merge with FSF.
+
+ * config.sub: Change 'amigados' to 'amigaos' to match current usage.
+
* config.sub: Add "marketing-names" patch.
* config.sub: Handle v850-elf.
+
+ * .cvsignore (*-install): Remove.
+
* ltconfig: Set CONFIG_SHELL in libtool.
- * configure.in (noconfigdirs): Add support for v850e target.
-
+ * configure.in (noconfigdirs): Add support for v850e target.
+
* config.sub (maybe_os): Add support for v850e target.
- * configure.in (noconfigdirs): Add support for v850ea target.
-
+ * configure.in (noconfigdirs): Add support for v850ea target.
+
* config.sub (maybe_os): Add support for v850ea target.
* Makefile.in (CC_FOR_TARGET): When winsup/Makefile present,
- correctly specify the target build directory $(TARGET_SUBDIR)/winsup
- for libraries.
+ correctly specify the target build directory $(TARGET_SUBDIR)/winsup
+ for libraries.
* Makefile.in (EXTRA_GCC_FLAGS): Fix handling of macros with values
- separated by spaces.
+ separated by spaces.
- * configure (GDB_TK): Needs itcl and tix.
+ * configure (GDB_TK): Needs itcl and tix.
(CLEAN_TARGET_MODULES): Add clean-target-gperf.
-
+
* config.sub (mn10200): Recognize new basic machine.
$(DEFAULT_YACC).
* configure.in: Build itl, db, sn, etc., when building for native
- cygwin32.
+ cygwin32.
* Makefile.in (LD): New variable.
(EXTRA_HOST_FLAGS): Pass down LD.
* configure.in (targargs): Strip out any supplied --build argument
- before adding our own. Always add --build.
+ before adding our own. Always add --build.
- * configure: Use '|' instead of ":" as the seperator in
+ * configure: Use '|' instead of ":" as the separator in
sed. Otherwise sed chokes on NT path names with drive
designators. Also look for "?:*" as the leading characters in an
absolute pathname.
* configure.in (noconfigdirs): Disable target-newlib,
- target-examples and target-libiberty for d30v.
+ target-examples and target-libiberty for d30v.
* configure.in (d30v-*): Remove sim directory from list of
- unsupported d30v directories
+ unsupported d30v directories
- * config.sub, configure.in: Add d30v target cpu.
-
+ * config.sub, configure.in: Add d30v target cpu.
+
* makefile.vms: New file.
LynxOs is not a hardware supplier.
* config.guess: Contributions from bug-gnu-utils to add support for:
- OpenBSD like NetBSD.
+ OpenBSD like NetBSD.
Stratus systems.
More Pyramid systems.
i[n>4]86 Intel chips.
- * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
+ * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
host configuration file.
* configure.in (noconfigdirs): Don't build libgloss for arm-coff
- targets.
+ targets.
* configure.in: Use a single line for host_tools and native_only.
+
+ * Makefile.in (install-itcl): Install tcl first.
+
+
+ * config/mh-cygwin32: ok to build split texinfo files
+
+
+ * configure.in: remove bison from noconfigdirs for Cygwin32 host
+
* config.sub, configure.in: Add entries for m32r.
+
+ * config.guess: Merge with FSF.
+
* Makefile.in (inet-install): Don't run install-gzip.
- * configure.in (d10v-*-*): Remove ld from $noconfigdirs.
+ * configure.in (d10v-*-*): Remove ld from $noconfigdirs.
* Makefile.in (TARGET_SUBDIR): Move comment to previous line so we
- don't get ". ".
+ don't get ". ".
* Makefile.in (EXTRA_GCC_FLAGS): If any of the make variables
LANGUAGES, BOOT_CFLAGS, STMP_FIXPROTO, LIMITS_H_TEST,
LIBGCC1_TEST, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES, and ENQUIRE are
- non-empty, pass them on to the GCC make.
+ non-empty, pass them on to the GCC make.
(all-bootstrap): New rule that is like all-gcc, except it executes
the GCC bootstrap rule instead of the GCC all rule.
* config/mt-v810 (CC_FOR_TARGET): Add -ansi flag. NEC compiler
- defaults to K&R mode, but doesn't have varargs.h, so we have to
+ defaults to K&R mode, but doesn't have varargs.h, so we have to
compile in ANSI mode.
* mpw-config.in: Configure grez if targeting Mac.
* config.sub: Accept pmac and pmac-mpw as names for PowerMacs,
- accept mpw and mac-mpw as names for m68k Macs, change macos7 to
- just macos.
+ accept mpw and mac-mpw as names for m68k Macs, change macos7 to
+ just macos.
* configure.in: Configure grez resource compiler if targeting Mac.
* Makefile.in (all-grez, install-grez): New targets.
* configure: CXX defaults to gcc, not g++. If we find
- gcc in the path, set CC to gcc -O2.
+ gcc in the path, set CC to gcc -O2.
* configure.in (host_makefile_frag): Use m68k-sun-sunos* instead
- of m68k-sun-* when selecting mh-sun3 to avoid matching NetBSD/sun3
- systems.
+ of m68k-sun-* when selecting mh-sun3 to avoid matching NetBSD/sun3
+ systems.
* Makefile.in: Build winsup.
* configure.in: Winsup is configured when target is win32.
Can only build win32 target GDB when native.
-
+
* config.guess: Recognize HP model 819 machines as having
- * configure.in (CC): Try to get CC from
+ * configure.in (CC): Try to get CC from
${srcdir}/${host_makefile_frag}, not ${host_makefile_frag}.
- * configure.in (host i[345]86-*-win32): Reduce the
+ * configure.in (host i[345]86-*-win32): Reduce the
noconfigdirs again.
gdb, ld and opcodes on v810-*-*.
-
+
* config/mh-ncrsvr43: Removed AR_FLAGS
* config.sub: recognise mips64vr4300 and mips64vr4300el as valid
- targets.
+ targets.
* brought build-all.mk update-to-date with progressive build-all.mk,
added new targets and hppa info.
-
+
* configure: If config.guess result is a prefix of the user
- * configure.in (*-*-lynxos*): Don't configure newlib for either
- native or cross Lynx.
+ * configure.in (*-*-lynxos*): Don't configure newlib for either
+ native or cross Lynx.
* configure: Ignore --x-includes and --x-libraries, for Autoconf
- compatibility.
+ compatibility.
* Makefile.in (DISTDOCDIRS): New variable.
(taz): Edit local Makefile.in sooner, instead of proto-toplev
- Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS.
+ Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS.
* config.sub: Accept linux*coff and linux*elf as operating
systems.
+
+ * ltmain.sh: Handle symlinks in generated script.
+
* config.sub: Recognize mips64, and mips3 as an alias for it.
* configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
if gas and ld are in the source tree and are in ${configdirs}.
If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
- the --with options (but still pass them down on the command line,
+ --with options (but still pass them down on the command line,
if they were explicitly specified).
+
+ * configure: Handle autoconf style directory options: --bindir,
+ --datadir, --includedir, --infodir, --libdir, --libexecdir,
+ --mandir, --oldincludedir, --sbindir, --sharedstatedir,
+ --sysconfdir.
+ * Makefile.in (sbindir, libexecdir, sysconfdir): New variables.
+ (sharedstatedir, localstatedir, oldincludedir): New variables.
+ (BASE_FLAGS_TO_PASS): Pass down bindir, datadir, includedir,
+ infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir,
+ sbindir, sharedstatedir, and sysconfdir.
+
* configure: substitute SHELL value in Makefile.in with
${CONFIG_SHELL}
+
+ * ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.
+
* configure.in: Build gas, ld, and binutils for *-*-sysv4* and
- * config.sub, configure.in: accept OSE68000 and OSE68k.
+ * config.sub, configure.in: accept OSE68000 and OSE68k.
* Makefile.in: don't create all directories for ``make install'';
let the subdirectories create the ones they need.
projects / binutils.git / blobdiff