+
+ * configure.in (CC): Get ^CC, not just any old CC, from
+ ${host_makefile_frag}.
+
+
+ * configure.in (CC): Try to get CC from
+ ${srcdir}/${host_makefile_frag}, not ${host_makefile_frag}.
+
+
+ * Makefile.in (TARGET_CONFIGDIRS): configure targetdirs
+ only if it exists in $(srcdir).
+
+
+ * configure: If CC and CXX are not set in the environment, set
+ them, based on either an existing Makefile or on searching for gcc
+ in PATH. Substitute for CC and CXX in Makefile.
+ * configure.in: Remove libm from target_libs. Separate
+ target_configdirs from configdirs. If CC is not set in
+ environment, try to get it from a host Makefile fragment. Rewrite
+ changes of configdirs to use skipdirs instead. A few minor
+ tweaks. Take directories out of target_configdirs as they are
+ taken out of configdirs. Remove existing Makefile files from
+ subdirectories. Substitute for TARGET_CONFIGDIRS and
+ CONFIG_ARGUMENTS in Makefile.
+ * Makefile.in (TARGET_CONFIGDIRS): New variable, automatically set
+ by configure.in.
+ (CONFIG_ARGUMENTS): Likewise.
+ (CONFIGURE_TARGET_MODULES): New variable.
+ ($(DO_X)): Loop over TARGET_CONFIGDIRS as well as SUBDIRS.
+ ($(CONFIGURE_TARGET_MODULES)): New target.
+ (configure-libg++, configure-libio): New targets.
+ (all-libg++): Depend upon configure-libg++.
+ (all-libio): Depend upon configure-libio.
+ (configure-libgloss, all-libgloss): New targets.
+ (configure-libstdc++): New target.
+ (all-libstdc++): Depend upon configure-libstdc++.
+ (configure-librx, all-librx): New targets.
+ (configure-newlib): New target.
+ (all-newlib): Depend upon configure-newlib
+ (configure-xiberty): New target.
+ (all-xiberty): Depend upon configure-xiberty.
+
+
+ * configure.in (host i[345]86-*-win32): Expand the
+ noconfigdirs again.
+
+
+ * mpw-configure: Fix sed command file name.
+
+
+ * configure.in (host i[345]86-*-win32): Reduce the
+ noconfigdirs again.
+
+
+ * configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
+ or powerpc*-*-pe*, since they are not yet supported.
+
+
+ Add PowerMac support and many other enhancements.
+ * mpw-configure: New option --cc to select compiler to use,
+ paste options set according to --cc into the generated
+ Makefile, generate the Makefile by sed'ing the Unix Makefile.in
+ if mpw-make.sed is present.
+ * mpw-config.in: Don't test for gC1, test for mpw-touch,
+ add forward includes for PowerPC include files.
+ * mpw-build.in: Build using Makefile.PPC if present.
+ (do-byacc, etc): Remove separate version resource builds.
+ (do-gas): Build "stamps" before "all".
+ (do-gcc): Build "stamps-h" and "stamps-c" before "all".
+ * mpw-README: Update to reflect --cc option, PowerMac support,
+ and recently-reported compatibility problems.
+
+
+ * cfg-ml-com.in (m68*-*-*): Only build multilibs for
+ embedded m68k systems (-aout, -coff, -elf, -vxworks).
+ (--with-multilib-top): Pass to recursive invocations.
+
+
+ * configure.in (noconfigdirs): Disable libg++ and libstdc++ on
+ v810-*-*.
+
+
+ * configure.in (noconfigdirs): Disable bfd, binutils, gas, gcc,
+ gdb, ld and opcodes on v810-*-*.
+
+
+ * config/mh-ncrsvr43: Removed AR_FLAGS
+
+
+ * Makefile.in (DO_X): Change do-realclean to do-maintainer-clean.
+ (local-maintainer-clean): New target.
+ (maintainer-clean): New target.
+ (realclean): Just depend upon maintainer-clean.
+
+
+ * configure.in (noconfigdirs): Disable gdb on m68k-*-netbsd*.
+
+
+ * configure.in: Build ld in mips*-*-bsd* case.
+
+
+ * config.sub: Accept -lites* OS. From Ian Dall.
+
+start-sanitize-sh3e
+
+ * cfg-ml-com.in (sh-*-*): Add sh3e support.
+
+end-sanitize-sh3e
+
+ * config.sub: recognise mips64vr4300 and mips64vr4300el as valid
+ targets.
+
+
+ * configure.in: treat i386-win32 canadian cross the same as
+ i386-go32 canadian cross.
+
+
+ * cfg-ml-com.in (powerpc*-*-eabisim): Add support for PowerPC
+ running under the simulator to build a reduced set of libraries.
+ (powerpc-*-eabiaix): Add fine grained multilib support added to
+ other powerpc targets yesterday.
+
+
+ * cfg-ml-com.in (powerpc*): Add support for -disable-biendian,
+ -disable-softfloat, -disable-relocatable, -disable-aix, and
+ -disable-sysv to control which multilib libraries get built.
+
+
+ * configure: Add Makefile.tem to list of files to remove in trap
+ handler.
+
+
+ * config.guess (*Linux*): Add missing "exit"s.
+ Also, need specific check for alpha-unknown-linux (uses COFF).
+
+
+ * config.guess: Merge with FSF:
+
+ * config.guess (AIX4): More robust release numbering discovery.
+
+ * config.guess (i386-sequent-ptx): Properly get version number.
+
+ * config.guess (mips:*:4*:UMIPS): New case.
+
+
+ * configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
+ (i386-win32 host): Likewise. Don't build readline.
+
+
+ * Makefile.in (GDBTK_SUPPORT_DIRS): Define and pass as part of
+ SUPPORT_FILES to submakes.
+
+
+ * Makefile.in (GDB_SUPPORT_DIRS): Add utils.
+ (DEVO_SUPPORT): Add mpw-README, mpw-build.in, mpw-config.h and
+ mpw-configure.
+
+
+ * configure.in (appdirs): Use =, not ==, in test expression when
+ trying to build the text to print in the warning message for
+ Solaris users.
+
+
+ * cfg-ml-com.in (z8k-*-coff): Add 'std' multilib build.
+
+
+ * config.guess: Recognize lynx-2.3.
+
+
+ * config.sub (z8ksim): Deleted
+ (z8k-*-coff): New, this is the one true name of the target.
+
+
+ * cfg-ml-pos.in (dotdot): Work around SunOS sed bug.
+
+
+ * config.guess (*:Linux:*:*): First try asking the linker what the
+ default object file format is (elf, aout, or coff). Then if this
+ fails, try previous methods.
+
+
+ * configure.in: Don't build newlib for *-*-vxworks5.1.
+
+
+ * configure.in: Don't build newlib for a29k-*-vxworks5.1.
+ * test-build.mk: Add setting of --with-headers for a29k-vxworks5.1.
+
+
+ * cfg-ml-pos.in (MULTITOP): Trim excess trailing "/.".
+
+
+ * cfg-ml-com.in: New file.
+ * cfg-ml-pos.in: New file.
+
+
+ * COPYING.NEWLIB: Add HP free copyright to list.
+
+
+ * config.sub: Recognize -eabi* for the system, not just -eabi.
+
+
+ * Makfile.in (DLLTOOL_FOR_TARGET): New name, pass it down.
+ * config.sub, configure.in (win32): New target and host.
+
+
+ * configure.in: Add i386-pe configuration.
+
+
+ * mpw-build.in (install): Install GDB after LD.
+
+
+ * mpw-config.in (elf/mips.h): Always forward-include, needed
+ for GDB to build.
+
+
+ * testsuite: New directory for customer acceptance and whole tool
+ chain tests.
+
+
+ * configure: If per-host line isn't found, but AC_OUTPUT is found
+ and a configure script exists, run it instead.
+
+
+ * config.guess: Update from FSF, for alpha-dec-winnt3.5 and Crays.
+
+
+ * configure: Set build_{cpu,vendor,os,alias} to host values when
+ --build isn't specified.
+
+
+ * Makefile.in (PICFLAG, PICFLAG_FOR_TARGET): New macros.
+ (FLAGS_TO_PASS): Pass them.
+ (EXTRA_TARGET_FLAGS): Ditto.
+
+ * config/m?-*pic: Define PICFLAG* instead of LIB*FLAGS*.
+
+
+ * Makefile.in (all-libg++): Depend on all-libstdc++.
+
+
+ * configure.in (noconfigdirs): Enable all packages for
+ i386-unknown-netbsd.
+
+
+ * configure.in (noconfigdirs): Don't configure tk for i386-go32
+ hosted builds (DOS builds)
+
+
+ Changes for ARM based on patches from Richard Earnshaw:
+ * config.sub: Handle armeb and armel.
+ * configure.in: Omit arm linker only for riscix.
+
+
+ * config.guess: Update from FSF.
+
+
+ * config.sub: Recognize powerpcle as the little endian varient of
+ the PowerPC. Recgonize ppc as a PowerPC variant, and ppcle as a
+ powerpcle variant. Convert pentium into i586, not i486. Add p5
+ alias for i586. Map new x86 variants p6, k5, nexgen into i586
+ temporarily.
+
+
+ * configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.
+
+
+ * config.sub: Accept -lites* as a basic system type.
+
+
+ * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
+ installed, and if so return linuxoldld as the system name.
+
+
+ * config.guess: Add hppa1.1-hp-lites support.
+
+
+ * configure.in: Don't build newlib for m68k-vxworks5.1.
+
+
+ * configure.in (mips-sgi-irix6): Use mh-irix5.
+
+
+ * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).
+
+
+ * test-build.mk: Enable building of shared libraries on IRIX 5 and
+ OSF/1. Fix compiler flags.
+ * build-all.mk: Support Linux and OSF/1 3.0. Fix compiler flags.
+
+
+ * configure.in: Recognize --with-newlib.
+ (sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
+
+
+ * Makefile.in: move {all,check,install}-gdb from *_MODULES
+ to *_X11_MODULES due to gdbtk needing X include files et al.
+
+
+ Merge in support for Mac MPW as a host.
+ (Old change descriptions retained for informational value.)
+
+ * mpw-config.in: Add generic include forwards for cpu-specific
+ include files in aout and elf directories.
+
+ * mpw-configure: Added copyright.
+ * mpw-config.in: Check for presence of required build tools.
+ (target_libs): Add newlib.
+ (target_tools): Add examples.
+ (Read Me): Generate as "Read Me for MPW" instead.
+ * mpw-build.in: Base sub-builds on all-foo instead of do-foo.
+ (all-byacc, do-byacc, all-flex, do-flex, do-newlib): New actions.
+ (do-gas, do-gcc, do-gdb, do-ld): Build Version.r first.
+
+ * mpw-configure: Remove subdir-specific makefile hackery,
+ delete mk.tmp after using it.
+
+ * mpw-build.in (all): Display start and end times.
+
+ * mpw-configure (host_canonical): Set.
+ (target_cpu): Always add to makefiles.
+ (ARCHDEFS, EMUL): Add to makefile only if nonempty.
+ (TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
+ (mpw-mh-mpw): Look for in srcdir and srcroot.
+ Use sed instead of mpw-edit-prefix to edit prefix definitions.
+
+ * mpw-build.in: (install-only): New target.
+
+ * mpw-configure (host_alias, target_alias): Rename from hostalias
+ and targetalias, add into generated Makefile.
+ (mk.tmp): If present, add into generated Makefile.
+ * mpw-build.in (all-gas): Build config.h first before gas proper.
+
+ * mpw-configure (config.status): Write only if changed.
+ * mpw-config.in (readline): Configure it (not built, just used for
+ definitions).
+
+ * mpw-config.in (elf/mips.h): Add a forward include.
+
+ * mpw-config.in: Forward-include most .h files in include into
+ extra-include.
+ (readline): Don't build.
+ mpw-build.in (install): Install GDB.
+
+ * mpw-configure (prefix, mpw_prefix): Handle it.
+ * mpw-config.in (mmalloc, readline): Don't configure.
+ * mpw-build.in (thisscript): Rename to ThisScript.
+ Use mpw-build instead of BuildProgram everywhere.
+ (mmalloc, readline): Don't build.
+ * mpw-README: New file, basic documentation about the MPW port.
+
+ * mpw-config.in: Use forward-include to create include files.
+
+ * mpw-configure: Add more things to the top of each configured
+ Makefile, including contents of config/mpw-mh-mpw.
+ * mpw-config.in (extra-include): Create this directory and fill it
+ with Posix-like include files when configuring.
+
+ * config.sub (apple, mac, mpw): Add various aliases.
+
+ * mpw-build.in: New file, top-level build script fragment for MPW.
+ * mpw-configure: New file, configure script for MPW.
+ * mpw-config.in: New file, config fragment for MPW.
+
+
+ * configure.in (host_libs): Remove glob, since it is gone from the
+ sources.
+
+
+ * Makefile.in: define empty GDB_NLM_DEPS var.
+
+ * configure.in(target_makefile_frag): use config/mt-netware
+ for netware targets.
+
+
+ * config.sub: Merge in recent FSF changes. Remove linux special
+ cases.
+
+
+ build-all.mk,config/mh-solaris: revert these two changes:
+
+
+ * build-all.mk: Use CC=cc -Xs on Solaris.
+
+ Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * config/mh-solaris: SunPRO C needs -Xs to be able to get a
+ working xmakefile for Emacs.
+
+
+ * glob/*: Removed. Schauer's 24 Feb 1994 readline change made us
+ stop using it.
+ * Makefile.in: Nuke all references to glob subdirectory.
+
+
+ * configure.in: Fix --enable-shared logic in per-host.
+
+
+ * configure.in (*-hp-hpux[78]*): Use mh-hpux8.
+
+
+ * configure.in (noconfigdirs): Don't build gas on AIX, for
+ powerpc*-*-aix* as well as for rs6000*-*-aix*.
+
+
+ * configure: Fix --cache-file to work if the file argument is a
+ relative path.
+
+
+ * configure: If the --cache-file is used, pass it down to
+ configure in subdirectories.
+
+
+ * config.sub: add vxworks29k configuration.
+
+
+ * Makefile.in (taz): Do "diststuff" part quietly.
+
+
+ * config.sub: Mini-merge with gcc/config.sub.
+
+
+ * config.guess (IRIX): Sed - to _.
+
+
+ * Makefile.in (source-vault, binary-vault): New targets
+
+
+ * config.sub: Recognize -eabi as a basic system type.
+
+
+ * configure.in (enable_shared stuff): Fix typo.
+
+
+ * Makefile.in (BASE_FLAGS_TO_PASS): Fix typo in passing LIBCXXFLAGS*.
+
+
+ * Makefile.in (LIBCXXFLAGS_FOR_TARGET): Add -fno-implicit-templates.
+
+
+ * configure.in (rs6000-*-*): Don't build gas.
+
+
+ * Makefile.in: Use /x/x/ instead of /brokensed/brokensed/, to
+ reduce command line length.
+ (AS_FOR_TARGET): Check for as.new, not Makefile.
+ (NM_FOR_TARGET): Check for nm.new, not Makefile.
+
+
+ * config.guess: Merge from FSF.
+
+
+ * configure: Don't use $ when handling program_suffix.
+
+
+ * configure.in: Configure tk for hppa/hpux.
+
* Makefile.in (LIBGXX_SUPPORT_DIRS): Add libstdc++.
projects / binutils.git / blobdiff