#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.64.
+# Generated by GNU Autoconf 2.64 for gas 2.25.51.
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1"
+test \$(( 1 + 1 )) = 2 || exit 1
+
+ test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1"
if (eval "$as_required") 2>/dev/null; then :
as_have_required=yes
else
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}
-case X$lt_ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
- ;;
-esac
-
-ECHO=${lt_ECHO-echo}
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
- # Yippee, $ECHO works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<_LT_EOF
-$*
-_LT_EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$lt_ECHO"; then
- if test "X${echo_test_string+set}" != Xset; then
- # find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
- then
- break
- fi
- done
- fi
-
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
- else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
-
- if test "X$ECHO" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- ECHO='print -r'
- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
- else
- # Try using printf.
- ECHO='printf %s\n'
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- ECHO="$CONFIG_SHELL $0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$CONFIG_SHELL $0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "$0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
- else
- # Oops. We lost completely, so just stick with echo.
- ECHO=echo
- fi
- fi
- fi
- fi
- fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
- lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
exec 7<&0 </dev/null 6>&1
MAKEFLAGS=
# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-PACKAGE_URL=
+PACKAGE_NAME='gas'
+PACKAGE_TARNAME='gas'
+PACKAGE_VERSION='2.25.51'
+PACKAGE_STRING='gas 2.25.51'
+PACKAGE_BUGREPORT=''
+PACKAGE_URL=''
ac_unique_file="as.h"
# Factoring default headers for most tests.
LIPO
NMEDIT
DSYMUTIL
-lt_ECHO
RANLIB
AR
OBJDUMP
ac_user_opts='
enable_option_checking
enable_dependency_tracking
-enable_plugins
-enable_largefile
enable_shared
enable_static
with_pic
enable_fast_install
with_gnu_ld
enable_libtool_lock
+enable_plugins
+enable_largefile
enable_targets
enable_checking
enable_werror
enable_build_warnings
enable_nls
enable_maintainer_mode
+with_zlib
'
ac_precious_vars='build_alias
host_alias
localstatedir='${prefix}/var'
includedir='${prefix}/include'
oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE}'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
infodir='${datarootdir}/info'
htmldir='${docdir}'
dvidir='${docdir}'
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
+\`configure' configures gas 2.25.51 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/gas]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
fi
if test -n "$ac_init_help"; then
-
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of gas 2.25.51:";;
+ esac
cat <<\_ACEOF
Optional Features:
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
- --enable-plugins Enable support for plugins (defaults no)
- --disable-largefile omit support for large files
--enable-shared[=PKGS] build shared libraries [default=yes]
--enable-static[=PKGS] build static libraries [default=yes]
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
+ --enable-plugins Enable support for plugins
+ --disable-largefile omit support for large files
--enable-targets alternative target configurations besides the primary
--enable-checking enable run-time checks
--enable-werror treat compile warnings as errors
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-zlib include zlib support (auto/yes/no) default=auto
Some influential environment variables:
CC C compiler command
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-configure
+gas configure 2.25.51
generated by GNU Autoconf 2.64
Copyright (C) 2009 Free Software Foundation, Inc.
ac_fn_c_check_decl ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $2 is declared" >&5
-$as_echo_n "checking whether $2 is declared... " >&6; }
+ as_decl_name=`echo $2|sed 's/ *(.*//'`
+ as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
+$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
$as_echo_n "(cached) " >&6
else
int
main ()
{
-#ifndef $2
- (void) $2;
+#ifndef $as_decl_name
+#ifdef __cplusplus
+ (void) $as_decl_use;
+#else
+ (void) $as_decl_name;
+#endif
#endif
;
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by $as_me, which was
+It was created by gas $as_me 2.25.51, which was
generated by GNU Autoconf 2.64. Invocation command line was
$ $0 $@
fi
-BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in`
am__api_version='1.11'
# Find a good install program. We prefer a C program (faster),
# Define the identity of the package.
- PACKAGE=gas
- VERSION=${BFD_VERSION}
+ PACKAGE='gas'
+ VERSION='2.25.51'
cat >>confdefs.h <<_ACEOF
-# The tests for host and target for $enable_largefile require
-# canonical names.
+case `pwd` in
+ *\ * | *\ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
-# As the $enable_largefile decision depends on --enable-plugins we must set it
-# even in directories otherwise not depending on the $plugins option.
+macro_version='2.2.7a'
+macro_revision='1.3134'
-# Check whether --enable-plugins was given.
-if test "${enable_plugins+set}" = set; then :
- enableval=$enable_plugins; case "${enableval}" in
- yes | "") plugins=yes ;;
- no) plugins=no ;;
- *) plugins=yes ;;
- esac
-else
- plugins=no
-fi
-case "${host}" in
- sparc-*-solaris*|i[3-7]86-*-solaris*)
- # On native 32bit sparc and ia32 solaris, large-file and procfs support
- # are mutually exclusive; and without procfs support, the bfd/ elf module
- # cannot provide certain routines such as elfcore_write_prpsinfo
- # or elfcore_write_prstatus. So unless the user explicitly requested
- # large-file support through the --enable-largefile switch, disable
- # large-file support in favor of procfs support.
- test "${target}" = "${host}" -a "x$plugins" = xno \
- && : ${enable_largefile="no"}
- ;;
-esac
-# Check whether --enable-largefile was given.
-if test "${enable_largefile+set}" = set; then :
- enableval=$enable_largefile;
-fi
-if test "$enable_largefile" != no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
-$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
-if test "${ac_cv_sys_largefile_CC+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_sys_largefile_CC=no
- if test "$GCC" != yes; then
- ac_save_CC=$CC
- while :; do
- # IRIX 6.2 and later do not support large files by default,
- # so use the C compiler's -n32 option if that helps.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
- ;
- return 0;
-}
-_ACEOF
- if ac_fn_c_try_compile "$LINENO"; then :
- break
-fi
-rm -f core conftest.err conftest.$ac_objext
- CC="$CC -n32"
- if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_sys_largefile_CC=' -n32'; break
-fi
-rm -f core conftest.err conftest.$ac_objext
- break
- done
- CC=$ac_save_CC
- rm -f conftest.$ac_ext
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
-$as_echo "$ac_cv_sys_largefile_CC" >&6; }
- if test "$ac_cv_sys_largefile_CC" != no; then
- CC=$CC$ac_cv_sys_largefile_CC
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
-$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
-if test "${ac_cv_sys_file_offset_bits+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- while :; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_sys_file_offset_bits=no; break
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`print -r -- -n 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#define _FILE_OFFSET_BITS 64
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
- ;
- return 0;
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO ""
}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_sys_file_offset_bits=64; break
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cv_sys_file_offset_bits=unknown
- break
-done
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
-$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
-case $ac_cv_sys_file_offset_bits in #(
- no | unknown) ;;
- *)
-cat >>confdefs.h <<_ACEOF
-#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
-_ACEOF
-;;
+
+case "$ECHO" in
+ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
esac
-rm -rf conftest*
- if test $ac_cv_sys_file_offset_bits = unknown; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
-$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
-if test "${ac_cv_sys_large_files+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- while :; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_sys_large_files=no; break
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#define _LARGE_FILES 1
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_sys_large_files=1; break
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cv_sys_large_files=unknown
- break
-done
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
-$as_echo "$ac_cv_sys_large_files" >&6; }
-case $ac_cv_sys_large_files in #(
- no | unknown) ;;
- *)
-cat >>confdefs.h <<_ACEOF
-#define _LARGE_FILES $ac_cv_sys_large_files
-_ACEOF
-;;
-esac
-rm -rf conftest*
- fi
-fi
-
-
-
-case `pwd` in
- *\ * | *\ *)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
-$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
-esac
-
-
-
-macro_version='2.2.6'
-macro_revision='1.3012'
-
-
-
-
-
-
-
-
-
-
-
-
-
-ltmain="$ac_aux_dir/ltmain.sh"
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
-$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if test "${ac_cv_path_SED+set}" = set; then :
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if test "${ac_cv_path_SED+set}" = set; then :
$as_echo_n "(cached) " >&6
else
ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
NM="$lt_cv_path_NM"
else
# Didn't find any BSD compatible name lister, look for dumpbin.
- if test -n "$ac_tool_prefix"; then
- for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in dumpbin "link -dump"
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
fi
if test -z "$DUMPBIN"; then
ac_ct_DUMPBIN=$DUMPBIN
- for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+ for ac_prog in dumpbin "link -dump"
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
fi
fi
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
if test "$DUMPBIN" != ":"; then
NM="$DUMPBIN"
else
lt_cv_nm_interface="BSD nm"
echo "int some_variable = 0;" > conftest.$ac_ext
- (eval echo "\"\$as_me:5741: $ac_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
(eval "$ac_compile" 2>conftest.err)
cat conftest.err >&5
- (eval echo "\"\$as_me:5744: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
(eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
cat conftest.err >&5
- (eval echo "\"\$as_me:5747: output\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: output\"" >&5)
cat conftest.out >&5
if $GREP 'External.*some_variable' conftest.out > /dev/null; then
lt_cv_nm_interface="MS dumpbin"
lt_cv_sys_max_cmd_len=8192;
;;
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
amigaos*)
# On AmigaOS with pdksh, this test takes hours, literally.
# So we just punt and use a minimum line length of 8192.
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
- = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
fi
;;
-cegcc)
+cegcc*)
# use the weaker test based on 'objdump'. See mingw*.
lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
lt_cv_deplibs_check_method=pass_all
;;
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
case $host_cpu in
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
;;
hppa*64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
;;
*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
esac
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
test $ac_status = 0; }; then
# Now try to grab the symbols.
nlist=conftest.nm
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
- (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } && test -s "$nlist"; then
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 6952 "configure"' > conftest.$ac_ext
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
rm -rf conftest*
;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
+ ;;
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
;;
- ppc64-*linux*|powerpc64-*linux*)
+ powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
- ppc*-*linux*|powerpc*-*linux*)
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if test "${lt_cv_ld_force_load+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
case $host_os in
rhapsody* | darwin1.[012])
_lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[91]*)
_lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[012]*)
+ 10.[012][,.]*)
_lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
10.*)
_lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
else
_lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
fi
- if test "$DSYMUTIL" != ":"; then
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
+
+
# Set options
+
test -z "$LN_S" && LN_S="ln -s"
-
-
-
-
-
-
-
-
-
-
-
-
-
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
;;
esac
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
# Global variables:
ofile=libtool
can_build_shared=yes
*) break;;
esac
done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
# Only perform the check for file, if the check method requires it
lt_prog_compiler_no_builtin_flag=
if test "$GCC" = yes; then
- lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+ case $cc_basename in
+ nvcc*)
+ lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+ *)
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+ esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:8214: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:8218: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_rtti_exceptions=yes
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
fi
+ lt_prog_compiler_pic='-fPIC'
;;
amigaos*)
lt_prog_compiler_pic='-fno-common'
;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static=
+ ;;
+
hpux*)
# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
# PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
lt_prog_compiler_pic='-fPIC'
;;
esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ lt_prog_compiler_wl='-Xlinker '
+ lt_prog_compiler_pic='-Xcompiler -fPIC'
+ ;;
+ esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
lt_prog_compiler_pic='--shared'
lt_prog_compiler_static='--static'
;;
- pgcc* | pgf77* | pgf90* | pgf95*)
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
lt_prog_compiler_wl='-Wl,'
# All Alpha code is PIC.
lt_prog_compiler_static='-non_shared'
;;
- xl*)
- # IBM XL C 8.0/Fortran 10.1 on PPC
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-qpic'
lt_prog_compiler_static='-qstaticlink'
;;
*)
case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
+ *Sun\ F* | *Sun*Fortran*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_wl=''
;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ *Sun\ C*)
+ # Sun C 5.9
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl=''
+ lt_prog_compiler_wl='-Wl,'
;;
esac
;;
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:8553: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:8557: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_pic_works=yes
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&5
- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_static_works=yes
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:8658: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:8662: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
lt_cv_prog_compiler_c_o=yes
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:8713: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:8717: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
lt_cv_prog_compiler_c_o=yes
esac
ld_shlibs=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+ *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
fi
supports_anon_versioning=no
case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
*\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
ld_shlibs=no
cat <<_LT_EOF 1>&2
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
_LT_EOF
fi
# _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
+ export_dynamic_flag_spec='${wl}--export-all-symbols'
allow_undefined_flag=unsupported
always_export_symbols=no
enable_shared_with_static_runtimes=yes
fi
;;
+ haiku*)
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ link_all_deplibs=yes
+ ;;
+
interix[3-9]*)
hardcode_direct=no
hardcode_shlibpath_var=no
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
&& test "$tmp_diet" = no
then
- tmp_addflag=
+ tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
lf95*) # Lahey Fortran 8.1
whole_archive_flag_spec=
tmp_sharedflag='--shared' ;;
- xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ ;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
compiler_needs_object=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
fi
case $cc_basename in
- xlf*)
+ xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
hardcode_libdir_flag_spec=
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
# -berok will link without error, but may produce a broken library.
no_undefined_flag=' ${wl}-bernotok'
allow_undefined_flag=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec='$convenience'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ fi
archive_cmds_need_lc=yes
# This is similar to how AIX traditionally builds its shared libraries.
archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
# FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
old_archive_from_new_cmds='true'
# FIXME: Should let the user specify the lib program.
hardcode_direct=no
hardcode_automatic=yes
hardcode_shlibpath_var=unsupported
- whole_archive_flag_spec=''
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ else
+ whole_archive_flag_spec=''
+ fi
link_all_deplibs=yes
allow_undefined_flag="$_lt_dar_allow_undefined"
case $cc_basename in
*) _lt_dar_can_shared=$GCC ;;
esac
if test "$_lt_dar_can_shared" = "yes"; then
- output_verbose_link_cmd=echo
+ output_verbose_link_cmd=func_echo_all
archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
hardcode_shlibpath_var=no
;;
- freebsd1*)
- ld_shlibs=no
- ;;
-
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
+ freebsd2.*)
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
hardcode_minus_L=yes
;;
hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
;;
hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
case $host_cpu in
hppa*64*)
archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if test "${lt_cv_prog_compiler__b+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler__b=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -b"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler__b=yes
+ fi
+ else
+ lt_cv_prog_compiler__b=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
;;
esac
fi
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
int foo(void) {}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LDFLAGS="$save_LDFLAGS"
else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
fi
archive_cmds_need_lc='no'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
- archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
fi
archive_cmds_need_lc='no'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
*) lt_awk_arg="/^libraries:/" ;;
esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
- else
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
# Ok, now we have the path, separated by spaces, we can step through it
# and add multilib dir if necessary.
lt_tmp_lt_search_path_spec=
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
BEGIN {RS=" "; FS="/|\n";} {
lt_foo="";
lt_count=0;
if (lt_foo != "") { lt_freq[lt_foo]++; }
if (lt_freq[lt_foo] == 1) { print lt_foo; }
}'`
- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
shlibpath_var=LD_LIBRARY_PATH
;;
-freebsd1*)
- dynamic_linker=no
- ;;
-
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
objformat=`/usr/bin/objformat`
else
case $host_os in
- freebsd[123]*) objformat=aout ;;
+ freebsd[23].*) objformat=aout ;;
*) objformat=elf ;;
esac
fi
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
- freebsd2*)
+ freebsd2.*)
shlibpath_overrides_runpath=yes
;;
freebsd3.[01]* | freebsdelf3.[01]*)
hardcode_into_libs=yes
;;
+haiku*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
soname_spec='${libname}${release}${shared_ext}$major'
;;
esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
;;
interix[3-9]*)
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" ||
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
test -n "$runpath_var" ||
test "X$hardcode_automatic" = "Xyes" ; then
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11095 "configure"
+#line 10970 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
# endif
#endif
-void fnord() { int i=42;}
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+void fnord () __attribute__((visibility("default")));
+#endif
+
+void fnord () { int i=42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
/* dlclose (self); */
}
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11191 "configure"
+#line 11076 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
# endif
#endif
-void fnord() { int i=42;}
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+void fnord () __attribute__((visibility("default")));
+#endif
+
+void fnord () { int i=42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
/* dlclose (self); */
}
else
+# The tests for host and target for $enable_largefile require
+# canonical names.
+
+
+
+# As the $enable_largefile decision depends on --enable-plugins we must set it
+# even in directories otherwise not depending on the $plugins option.
+
+
+ maybe_plugins=no
+ for ac_header in dlfcn.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+ maybe_plugins=yes
+fi
+
+done
+
+ for ac_header in windows.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "windows.h" "ac_cv_header_windows_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_windows_h" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_WINDOWS_H 1
+_ACEOF
+ maybe_plugins=yes
+fi
+
+done
+
+
+ # Check whether --enable-plugins was given.
+if test "${enable_plugins+set}" = set; then :
+ enableval=$enable_plugins; case "${enableval}" in
+ no) plugins=no ;;
+ *) plugins=yes
+ if test "$maybe_plugins" != "yes" ; then
+ as_fn_error "Building with plugin support requires a host that supports dlopen." "$LINENO" 5
+ fi ;;
+ esac
+else
+ plugins=$maybe_plugins
+
+fi
+
+ if test "$plugins" = "yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlopen" >&5
+$as_echo_n "checking for library containing dlopen... " >&6; }
+if test "${ac_cv_search_dlopen+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' dl; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_dlopen=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if test "${ac_cv_search_dlopen+set}" = set; then :
+ break
+fi
+done
+if test "${ac_cv_search_dlopen+set}" = set; then :
+
+else
+ ac_cv_search_dlopen=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlopen" >&5
+$as_echo "$ac_cv_search_dlopen" >&6; }
+ac_res=$ac_cv_search_dlopen
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+ fi
+
+
+case "${host}" in
+ sparc-*-solaris*|i[3-7]86-*-solaris*)
+ # On native 32bit sparc and ia32 solaris, large-file and procfs support
+ # are mutually exclusive; and without procfs support, the bfd/ elf module
+ # cannot provide certain routines such as elfcore_write_prpsinfo
+ # or elfcore_write_prstatus. So unless the user explicitly requested
+ # large-file support through the --enable-largefile switch, disable
+ # large-file support in favor of procfs support.
+ test "${target}" = "${host}" -a "x$plugins" = xno \
+ && : ${enable_largefile="no"}
+ ;;
+esac
+
+# Check whether --enable-largefile was given.
+if test "${enable_largefile+set}" = set; then :
+ enableval=$enable_largefile;
+fi
+
+if test "$enable_largefile" != no; then
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
+$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
+if test "${ac_cv_sys_largefile_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_sys_largefile_CC=no
+ if test "$GCC" != yes; then
+ ac_save_CC=$CC
+ while :; do
+ # IRIX 6.2 and later do not support large files by default,
+ # so use the C compiler's -n32 option if that helps.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ if ac_fn_c_try_compile "$LINENO"; then :
+ break
+fi
+rm -f core conftest.err conftest.$ac_objext
+ CC="$CC -n32"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_largefile_CC=' -n32'; break
+fi
+rm -f core conftest.err conftest.$ac_objext
+ break
+ done
+ CC=$ac_save_CC
+ rm -f conftest.$ac_ext
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
+$as_echo "$ac_cv_sys_largefile_CC" >&6; }
+ if test "$ac_cv_sys_largefile_CC" != no; then
+ CC=$CC$ac_cv_sys_largefile_CC
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
+if test "${ac_cv_sys_file_offset_bits+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_file_offset_bits=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define _FILE_OFFSET_BITS 64
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_file_offset_bits=64; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_file_offset_bits=unknown
+ break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
+$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
+case $ac_cv_sys_file_offset_bits in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
+_ACEOF
+;;
+esac
+rm -rf conftest*
+ if test $ac_cv_sys_file_offset_bits = unknown; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
+$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
+if test "${ac_cv_sys_large_files+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_large_files=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define _LARGE_FILES 1
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_large_files=1; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_large_files=unknown
+ break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
+$as_echo "$ac_cv_sys_large_files" >&6; }
+case $ac_cv_sys_large_files in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _LARGE_FILES $ac_cv_sys_large_files
+_ACEOF
+;;
+esac
+rm -rf conftest*
+ fi
+fi
+
+
+
# Check whether --enable-targets was given.
if test "${enable_targets+set}" = set; then :
enableval=$enable_targets; case "${enableval}" in
using_cgen=no
-GCC_WARN_CFLAGS="-W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow"
+# Set the 'development' global.
+. $srcdir/../bfd/development.sh
+
+GCC_WARN_CFLAGS="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+__GNUC__
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "^[0-3]$" >/dev/null 2>&1; then :
+
+else
+ GCC_WARN_CFLAGS="$GCC_WARN_CFLAGS -Wshadow"
+fi
+rm -f conftest*
+
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
fi
-# Enable -Wno-format by default when using gcc on mingw
+# Disable -Wformat by default when using gcc on mingw
case "${host}" in
*-*-mingw32*)
if test "${GCC}" = yes -a -z "${ERROR_ON_WARNING}" ; then
*) ;;
esac
-# Enable -Werror by default when using gcc
-if test "${GCC}" = yes -a -z "${ERROR_ON_WARNING}" ; then
+# Enable -Werror by default when using gcc. Turn it off for releases.
+if test "${GCC}" = yes -a -z "${ERROR_ON_WARNING}" -a "$development" = true ; then
ERROR_ON_WARNING=yes
fi
ac_config_headers="$ac_config_headers config.h:config.in"
+# PR 14072
+
+
# If we are on a DOS filesystem, we must use gdb.ini rather than
# .gdbinit.
case "${host}" in
microblaze*)
;;
- mips-sony-bsd*)
- ;;
- mips-*-bsd*)
- as_fn_error "Unknown vendor for mips-bsd configuration." "$LINENO" 5
- ;;
-
ppc-*-aix[5-9].*)
$as_echo "#define AIX_WEAK_SUPPORT 1" >>confdefs.h
- ;;
- ppc-*-linux-*)
- case "$endian" in
- big) ;;
- *) as_fn_error "GNU/Linux must be configured big endian" "$LINENO" 5 ;;
- esac
;;
ppc-*-solaris*)
if test ${this_target} = $target; then
mipsisa32r2 | mipsisa32r2el)
mips_cpu=mips32r2
;;
+ mipsisa32r3 | mipsisa32r3el)
+ mips_cpu=mips32r3
+ ;;
+ mipsisa32r5 | mipsisa32r5el)
+ mips_cpu=mips32r5
+ ;;
+ mipsisa32r6 | mipsisa32r6el)
+ mips_cpu=mips32r6
+ ;;
mipsisa64 | mipsisa64el)
mips_cpu=mips64
;;
mipsisa64r2 | mipsisa64r2el)
mips_cpu=mips64r2
;;
+ mipsisa64r3 | mipsisa64r3el)
+ mips_cpu=mips64r3
+ ;;
+ mipsisa64r5 | mipsisa64r5el)
+ mips_cpu=mips64r5
+ ;;
+ mipsisa64r6 | mipsisa64r6el)
+ mips_cpu=mips64r6
+ ;;
mipstx39 | mipstx39el)
mips_cpu=r3900
;;
mipsisa32r2* | mipsisa64r2*)
mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r2//' -e 's/el$//'`
;;
+ mipsisa32r6* | mipsisa64r6*)
+ mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r6//' -e 's/el$//'`
+ ;;
mips64* | mipsisa64* | mipsisa32*)
mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..//' -e 's/el$//'`
;;
+ mips*)
+ mips_cpu=`echo $target_cpu | sed -e 's/^mips//' -e 's/el$//'`
+ ;;
*)
as_fn_error "$target_cpu isn't a supported MIPS CPU name" "$LINENO" 5
;;
esac
# See whether it's appropriate to set E_MIPS_ABI_O32 for o32
# binaries. It's a GNU extension that some OSes don't understand.
- # The value only matters on ELF targets.
case ${target} in
*-*-irix*)
use_e_mips_abi_o32=0
esac
# Decide which ABI to target by default.
case ${target} in
- mips64*-linux* | mips-sgi-irix6*)
+ mips64*-linux* | mips-sgi-irix6* | mips64*-freebsd* | mips64*-kfreebsd*-gnu)
mips_default_abi=N32_ABI
;;
- mips*-linux*)
+ mips*-linux* | mips*-freebsd* | mips*-kfreebsd*-gnu)
mips_default_abi=O32_ABI
;;
mips64*-openbsd*)
extra_objects="$extra_objects bfin-parse.o"
fi
- echo ${extra_objects} | grep -s "bfin-lex.o"
+ echo ${extra_objects} | grep -s "bfin-lex-wrapper.o"
if test $? -ne 0 ; then
- extra_objects="$extra_objects bfin-lex.o"
+ extra_objects="$extra_objects bfin-lex-wrapper.o"
fi
;;
- fr30 | ip2k | iq2000 | lm32 | m32r | openrisc)
+ epiphany | fr30 | ip2k | iq2000 | lm32 | m32r | or1k)
using_cgen=yes
;;
extra_objects="$extra_objects itbl-parse.o"
fi
- echo ${extra_objects} | grep -s "itbl-lex.o"
+ echo ${extra_objects} | grep -s "itbl-lex-wrapper.o"
if test $? -ne 0 ; then
- extra_objects="$extra_objects itbl-lex.o"
+ extra_objects="$extra_objects itbl-lex-wrapper.o"
fi
echo ${extra_objects} | grep -s "itbl-ops.o"
using_cgen=yes
;;
+ nds32)
+ # Decide BASELINE, REDUCED_REGS, FPU_DP_EXT, FPU_SP_EXT features
+ # based on arch_name.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for default configuration of --with-arch" >&5
+$as_echo_n "checking for default configuration of --with-arch... " >&6; }
+ if test "x${with_arch}" != x; then
+ case ${with_arch} in
+ v2j | v2s | v2f | v2 | v3m | v3j | v3s | v3f | v3 )
+
+cat >>confdefs.h <<_ACEOF
+#define NDS32_DEFAULT_ARCH_NAME "$with_arch"
+_ACEOF
+
+ ;;
+ *)
+ as_fn_error "This kind of arch name does *NOT* exist!" "$LINENO" 5
+ ;;
+ esac
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_arch" >&5
+$as_echo "$with_arch" >&6; }
+
+ # Decide features one by one.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for default configuration of --enable-dx-regs" >&5
+$as_echo_n "checking for default configuration of --enable-dx-regs... " >&6; }
+ if test "x${enable_dx_regs}" == xyes; then
+
+$as_echo "#define NDS32_DEFAULT_DX_REGS 1" >>confdefs.h
+
+ else
+
+$as_echo "#define NDS32_DEFAULT_DX_REGS 0" >>confdefs.h
+
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_dx_regs" >&5
+$as_echo "$enable_dx_regs" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for default configuration of --enable-perf-ext" >&5
+$as_echo_n "checking for default configuration of --enable-perf-ext... " >&6; }
+ if test "x${enable_perf_ext}" == xno; then
+
+$as_echo "#define NDS32_DEFAULT_PERF_EXT 0" >>confdefs.h
+
+ else
+
+$as_echo "#define NDS32_DEFAULT_PERF_EXT 1" >>confdefs.h
+
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_perf_ext" >&5
+$as_echo "$enable_perf_ext" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for default configuration of --enable-perf-ext2" >&5
+$as_echo_n "checking for default configuration of --enable-perf-ext2... " >&6; }
+ if test "x${enable_perf_ext2}" == xno; then
+
+$as_echo "#define NDS32_DEFAULT_PERF_EXT2 0" >>confdefs.h
+
+ else
+
+$as_echo "#define NDS32_DEFAULT_PERF_EXT2 1" >>confdefs.h
+
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_perf_ext2" >&5
+$as_echo "$enable_perf_ext2" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for default configuration of --enable-string-ext" >&5
+$as_echo_n "checking for default configuration of --enable-string-ext... " >&6; }
+ if test "x${enable_string_ext}" == xno; then
+
+$as_echo "#define NDS32_DEFAULT_STRING_EXT 0" >>confdefs.h
+
+ else
+
+$as_echo "#define NDS32_DEFAULT_STRING_EXT 1" >>confdefs.h
+
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_string_ext" >&5
+$as_echo "$enable_string_ext" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for default configuration of --enable-audio-ext" >&5
+$as_echo_n "checking for default configuration of --enable-audio-ext... " >&6; }
+ if test "x${enable_audio_ext}" == xno; then
+
+$as_echo "#define NDS32_DEFAULT_AUDIO_EXT 0" >>confdefs.h
+
+ else
+
+$as_echo "#define NDS32_DEFAULT_AUDIO_EXT 1" >>confdefs.h
+
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_audio_ext" >&5
+$as_echo "$enable_audio_ext" >&6; }
+ ;;
+
i386 | s390 | sparc)
if test $this_target = $target ; then
fi
;;
+ rl78)
+ echo ${extra_objects} | grep -s "rl78-parse.o"
+ if test $? -ne 0 ; then
+ extra_objects="$extra_objects rl78-parse.o"
+ fi
+ ;;
+
rx)
echo ${extra_objects} | grep -s "rx-parse.o"
if test $? -ne 0 ; then
# From target name and format, produce a list of supported emulations.
case ${generic_target}-${fmt} in
- mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
- mips*-*-linux*-*) case "$endian" in
- big) emulation="mipsbelf mipslelf mipself" ;;
- *) emulation="mipslelf mipsbelf mipself" ;;
- esac ;;
- mips-*-lnews*-ecoff) ;;
- mips-*-*-ecoff) case "$endian" in
- big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
- *) emulation="mipslecoff mipsbecoff mipsecoff" ;;
- esac ;;
- mips-*-*-elf) case "$endian" in
+ mips-*-*-*) case "$endian" in
big) emulation="mipsbelf mipslelf mipself" ;;
*) emulation="mipslelf mipsbelf mipself" ;;
esac ;;
- mips-*-sysv4*MP*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
# i386-pc-pe-coff != i386-pc-coff.
i386-*-pe-coff) ;;
# Uncommenting the next line will turn on support for i386 AOUT
esac
fi
+# PE code has way too many macros tweaking behaviour
+case ${te_file} in
+ pe*) emulations="" ;;
+esac
+
# Assign floating point type. Most processors with FP support
# IEEE FP. On those that don't support FP at all, usually IEEE
# is emulated.
cgen_cpu_prefix=""
if test $using_cgen = yes ; then
case ${target_cpu} in
+ or1knd)
+ cgen_cpu_prefix=or1k ;;
*) cgen_cpu_prefix=${target_cpu} ;;
esac
#
# And then there's "--enable-targets=all"....
#
-# For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
+# For now, just always do it for MIPS ELF configurations. Sigh.
formats="${obj_format}"
emfiles=""
.) continue ;;
mipsbelf | mipslelf | mipself)
fmt=elf file=mipself ;;
- mipsbecoff | mipslecoff | mipsecoff)
- fmt=ecoff file=mipsecoff ;;
*coff)
fmt=coff file=$em ;;
*aout)
fi
if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
DEFAULT_EMULATION=`set . $emulations ; echo $2`
- # e-mips* has more than one emulation per file, e-i386* has just one at the
+ # e-mipself has more than one emulation per file, e-i386* has just one at the
# moment. If only one emulation is specified, then don't define
# USE_EMULATIONS or include any of the e-files as they will only be bloat.
case "${obj_format}${emfiles}" in
- multi* | *mips*)
+ multi* | *mipself*)
extra_objects="$extra_objects $emfiles"
$as_echo "#define USE_EMULATIONS 1" >>confdefs.h
LEX=${am_missing_run}flex
fi
-ALL_LINGUAS="fr tr es rw id"
+ALL_LINGUAS="fr tr es rw id ru fi ja"
# If we haven't got the data from the intl directory,
# assume NLS is disabled.
USE_NLS=no
-for ac_header in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h limits.h time.h sys/stat.h
+for ac_header in string.h stdlib.h memory.h strings.h unistd.h errno.h sys/types.h limits.h locale.h time.h sys/stat.h
do :
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
done
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether string.h and strings.h may both be included" >&5
+$as_echo_n "checking whether string.h and strings.h may both be included... " >&6; }
+if test "${gcc_cv_header_string+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+#include <strings.h>
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ gcc_cv_header_string=yes
+else
+ gcc_cv_header_string=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_header_string" >&5
+$as_echo "$gcc_cv_header_string" >&6; }
+if test $gcc_cv_header_string = yes; then
+
+$as_echo "#define STRING_WITH_STRINGS 1" >>confdefs.h
+
+fi
+
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
fi
done
-
-# Some systems don't have sbrk().
-for ac_func in sbrk
+for ac_func in sbrk setlocale
do :
- ac_fn_c_check_func "$LINENO" "sbrk" "ac_cv_func_sbrk"
-if test "x$ac_cv_func_sbrk" = x""yes; then :
+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+eval as_val=\$$as_ac_var
+ if test "x$as_val" = x""yes; then :
cat >>confdefs.h <<_ACEOF
-#define HAVE_SBRK 1
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
fi
done
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LC_MESSAGES" >&5
+$as_echo_n "checking for LC_MESSAGES... " >&6; }
+if test "${am_cv_val_LC_MESSAGES+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <locale.h>
+int
+main ()
+{
+return LC_MESSAGES
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ am_cv_val_LC_MESSAGES=yes
+else
+ am_cv_val_LC_MESSAGES=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_val_LC_MESSAGES" >&5
+$as_echo "$am_cv_val_LC_MESSAGES" >&6; }
+ if test $am_cv_val_LC_MESSAGES = yes; then
+
+$as_echo "#define HAVE_LC_MESSAGES 1" >>confdefs.h
+
+ fi
+
+
# do we need the math library?
case "${need_libm}" in
yes)
LIBM=
case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
# These system don't have libm, or don't need it
;;
*-ncr-sysv4.3*)
fi
+ac_fn_c_check_decl "$LINENO" "free" "ac_cv_have_decl_free" "$ac_includes_default"
+if test "x$ac_cv_have_decl_free" = x""yes; then :
+ ac_have_decl=1
+else
+ ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_FREE $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "getenv" "ac_cv_have_decl_getenv" "$ac_includes_default"
+if test "x$ac_cv_have_decl_getenv" = x""yes; then :
+ ac_have_decl=1
+else
+ ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_GETENV $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "malloc" "ac_cv_have_decl_malloc" "$ac_includes_default"
+if test "x$ac_cv_have_decl_malloc" = x""yes; then :
+ ac_have_decl=1
+else
+ ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_MALLOC $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "mempcpy" "ac_cv_have_decl_mempcpy" "$ac_includes_default"
+if test "x$ac_cv_have_decl_mempcpy" = x""yes; then :
+ ac_have_decl=1
+else
+ ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_MEMPCPY $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "realloc" "ac_cv_have_decl_realloc" "$ac_includes_default"
+if test "x$ac_cv_have_decl_realloc" = x""yes; then :
+ ac_have_decl=1
+else
+ ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_REALLOC $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "stpcpy" "ac_cv_have_decl_stpcpy" "$ac_includes_default"
+if test "x$ac_cv_have_decl_stpcpy" = x""yes; then :
+ ac_have_decl=1
+else
+ ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_STPCPY $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "strstr" "ac_cv_have_decl_strstr" "$ac_includes_default"
+if test "x$ac_cv_have_decl_strstr" = x""yes; then :
+ ac_have_decl=1
+else
+ ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_STRSTR $ac_have_decl
+_ACEOF
ac_fn_c_check_decl "$LINENO" "vsnprintf" "ac_cv_have_decl_vsnprintf" "$ac_includes_default"
if test "x$ac_cv_have_decl_vsnprintf" = x""yes; then :
ac_have_decl=1
;;
esac
+# Link in zlib if we can. This allows us to write compressed debug sections.
+
+ # See if the user specified whether he wants zlib support or not.
+
+# Check whether --with-zlib was given.
+if test "${with_zlib+set}" = set; then :
+ withval=$with_zlib;
+else
+ with_zlib=auto
+fi
+
+
+ if test "$with_zlib" != "no"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
+$as_echo_n "checking for library containing zlibVersion... " >&6; }
+if test "${ac_cv_search_zlibVersion+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char zlibVersion ();
+int
+main ()
+{
+return zlibVersion ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' z; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_zlibVersion=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if test "${ac_cv_search_zlibVersion+set}" = set; then :
+ break
+fi
+done
+if test "${ac_cv_search_zlibVersion+set}" = set; then :
+
+else
+ ac_cv_search_zlibVersion=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_zlibVersion" >&5
+$as_echo "$ac_cv_search_zlibVersion" >&6; }
+ac_res=$ac_cv_search_zlibVersion
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+ for ac_header in zlib.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_zlib_h" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_ZLIB_H 1
+_ACEOF
+
+fi
+
+done
+
+fi
+
+ if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
+ as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
+ fi
+ fi
+
+
# Support for VMS timestamps via cross compile
if test "$ac_cv_header_time_h" = yes; then
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by $as_me, which was
+This file was extended by gas $as_me 2.25.51, which was
generated by GNU Autoconf 2.64. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_version="\\
-config.status
+gas config.status 2.25.51
configured by $0, generated by GNU Autoconf 2.64,
with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
sed_quote_subst='$sed_quote_subst'
double_quote_subst='$double_quote_subst'
delay_variable_subst='$delay_variable_subst'
-macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
-macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
-enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
-pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
-enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
-host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
-host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
-host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
-build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
-build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
-build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
-SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
-Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
-GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
-EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
-FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
-LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
-NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
-LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
-max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
-ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
-exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
-lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
-lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
-lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
-reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
-reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
-deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
-file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
-AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
-AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
-RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
-old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
-CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
-GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
-SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
-ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
-MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
-need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
-DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
-NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
-LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
-libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
-shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
-export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
-allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
-inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
-link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
-fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
-always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
-export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
-variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
-need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
-version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
-runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
-libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
-soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
-old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
-striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
LTCC='$LTCC'
LTCFLAGS='$LTCFLAGS'
compiler='$compiler_DEFAULT'
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
# Quote evaled strings.
-for var in SED \
+for var in SHELL \
+ECHO \
+SED \
GREP \
EGREP \
FGREP \
lt_cv_sys_global_symbol_to_cdecl \
lt_cv_sys_global_symbol_to_c_name_address \
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-SHELL \
-ECHO \
lt_prog_compiler_no_builtin_flag \
lt_prog_compiler_wl \
lt_prog_compiler_pic \
libname_spec \
library_names_spec \
soname_spec \
+install_override_mode \
finish_eval \
old_striplib \
striplib; do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
finish_cmds \
sys_lib_search_path_spec \
sys_lib_dlsearch_path_spec; do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
esac
done
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
- ;;
-esac
-
ac_aux_dir='$ac_aux_dir'
xsi_shell='$xsi_shell'
lt_shell_append='$lt_shell_append'
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is part of GNU Libtool.
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
# The host system.
host_alias=$host_alias
host=$host
# turn newlines into spaces.
NL2SP=$lt_lt_NL2SP
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
# An object symbol dumper.
OBJDUMP=$lt_OBJDUMP
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
# A C compiler.
LTCC=$lt_CC
# The name of the directory that contains temporary libtool files.
objdir=$objdir
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# An echo program that does not interpret backslashes.
-ECHO=$lt_ECHO
-
# Used to examine libraries when file_magic_cmd begins with "file".
MAGIC_CMD=$MAGIC_CMD
# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
# Command to use after installation of a shared archive.
postinstall_cmds=$lt_postinstall_cmds
# The linker used to build libraries.
LD=$lt_LD
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds
func_dirname ()
{
# Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
if test "X$func_dirname_result" = "X${1}"; then
func_dirname_result="${3}"
else
# func_basename file
func_basename ()
{
- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
}
func_stripname ()
{
case ${2} in
- .*) func_stripname_result=`$ECHO "X${3}" \
- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "X${3}" \
- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
esac
}
# func_opt_split
func_opt_split ()
{
- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+ func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
+ func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
}
# func_lo2o object
func_lo2o ()
{
- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
}
# func_xform libobj-or-source
func_xform ()
{
- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
+ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
}
# func_arith arithmetic-term...
case "$ac_file" in */Makefile.in)
# Adjust a relative srcdir.
ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
# In autoconf-2.13 it is called $ac_given_srcdir.
# In autoconf-2.50 it is called $srcdir.
projects / binutils.git / blobdiff