/* tc-i960.h - Basic 80960 instruction formats.
- Copyright (C) 1989, 1990, 1991 Free Software Foundation, Inc.
-
+ Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1997, 1998, 1999,
+ 2000
+ Free Software Foundation, Inc.
+
This file is part of GAS, the GNU Assembler.
-
+
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2,
or (at your option) any later version.
-
+
GAS is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
the GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public
- License along with GAS; see the file COPYING. If not, write
- to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+ You should have received a copy of the GNU General Public License
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
#ifndef TC_I960
#define TC_I960 1
+#ifdef OBJ_ELF
+#define TARGET_FORMAT "elf32-i960"
+#define TARGET_ARCH bfd_arch_i960
+#endif
+
+#define TARGET_BYTES_BIG_ENDIAN 0
+
+#define WORKING_DOT_WORD
+
/*
* The 'COJ' instructions are actually COBR instructions with the 'b' in
* the mnemonic replaced by a 'j'; they are ALWAYS "de-optimized" if necessary:
* the instruction generated (a CTRL-format 'call') should have its relocation
* specially flagged for link-time replacement with a 'bal' or 'calls' if
* appropriate.
- */
+ */
/* tailor gas */
#define SYMBOLS_NEED_BACKPOINTERS
-#define LOCAL_LABELS_FB
-#define WANT_BITFIELDS
+#define LOCAL_LABELS_FB 1
+#define BITFIELD_CONS_EXPRESSIONS
/* tailor the coff format */
+#define BFD_ARCH bfd_arch_i960
+#define COFF_FLAGS F_AR32WR
+#define COFF_MAGIC I960ROMAGIC
#define OBJ_COFF_SECTION_HEADER_HAS_ALIGNMENT
-#define OBJ_COFF_MAX_AUXENTRIES (2)
-
-/* other */
-#define CTRL 0
-#define COBR 1
-#define COJ 2
-#define REG 3
-#define MEM1 4
-#define MEM2 5
-#define MEM4 6
-#define MEM8 7
-#define MEM12 8
-#define MEM16 9
-#define FBRA 10
-#define CALLJ 11
-
-/* Masks for the mode bits in REG format instructions */
-#define M1 0x0800
-#define M2 0x1000
-#define M3 0x2000
-
-/* Generate the 12-bit opcode for a REG format instruction by placing the
- * high 8 bits in instruction bits 24-31, the low 4 bits in instruction bits
- * 7-10.
- */
-
-#define REG_OPC(opc) ((opc & 0xff0) << 20) | ((opc & 0xf) << 7)
-
-/* Generate a template for a REG format instruction: place the opcode bits
- * in the appropriate fields and OR in mode bits for the operands that will not
- * be used. I.e.,
- * set m1=1, if src1 will not be used
- * set m2=1, if src2 will not be used
- * set m3=1, if dst will not be used
- *
- * Setting the "unused" mode bits to 1 speeds up instruction execution(!).
- * The information is also useful to us because some 1-operand REG instructions
- * use the src1 field, others the dst field; and some 2-operand REG instructions
- * use src1/src2, others src1/dst. The set mode bits enable us to distinguish.
- */
-#define R_0(opc) ( REG_OPC(opc) | M1 | M2 | M3 ) /* No operands */
-#define R_1(opc) ( REG_OPC(opc) | M2 | M3 ) /* 1 operand: src1 */
-#define R_1D(opc) ( REG_OPC(opc) | M1 | M2 ) /* 1 operand: dst */
-#define R_2(opc) ( REG_OPC(opc) | M3 ) /* 2 ops: src1/src2 */
-#define R_2D(opc) ( REG_OPC(opc) | M2 ) /* 2 ops: src1/dst */
-#define R_3(opc) ( REG_OPC(opc) ) /* 3 operands */
-
-/* DESCRIPTOR BYTES FOR REGISTER OPERANDS
- *
- * Interpret names as follows:
- * R: global or local register only
- * RS: global, local, or (if target allows) special-function register only
- * RL: global or local register, or integer literal
- * RSL: global, local, or (if target allows) special-function register;
- * or integer literal
- * F: global, local, or floating-point register
- * FL: global, local, or floating-point register; or literal (including
- * floating point)
- *
- * A number appended to a name indicates that registers must be aligned,
- * as follows:
- * 2: register number must be multiple of 2
- * 4: register number must be multiple of 4
- */
-
-#define SFR 0x10 /* Mask for the "sfr-OK" bit */
-#define LIT 0x08 /* Mask for the "literal-OK" bit */
-#define FP 0x04 /* Mask for "floating-point-OK" bit */
-
-/* This macro ors the bits together. Note that 'align' is a mask
- * for the low 0, 1, or 2 bits of the register number, as appropriate.
- */
-#define OP(align,lit,fp,sfr) ( align | lit | fp | sfr )
-
-#define R OP( 0, 0, 0, 0 )
-#define RS OP( 0, 0, 0, SFR )
-#define RL OP( 0, LIT, 0, 0 )
-#define RSL OP( 0, LIT, 0, SFR )
-#define F OP( 0, 0, FP, 0 )
-#define FL OP( 0, LIT, FP, 0 )
-#define R2 OP( 1, 0, 0, 0 )
-#define RL2 OP( 1, LIT, 0, 0 )
-#define F2 OP( 1, 0, FP, 0 )
-#define FL2 OP( 1, LIT, FP, 0 )
-#define R4 OP( 3, 0, 0, 0 )
-#define RL4 OP( 3, LIT, 0, 0 )
-#define F4 OP( 3, 0, FP, 0 )
-#define FL4 OP( 3, LIT, FP, 0 )
-
-#define M 0x7f /* Memory operand (MEMA & MEMB format instructions) */
-
-/* Macros to extract info from the register operand descriptor byte 'od'.
- */
-#define SFR_OK(od) (od & SFR) /* TRUE if sfr operand allowed */
-#define LIT_OK(od) (od & LIT) /* TRUE if literal operand allowed */
-#define FP_OK(od) (od & FP) /* TRUE if floating-point op allowed */
-#define REG_ALIGN(od,n) ((od & 0x3 & n) == 0)
-/* TRUE if reg #n is properly aligned */
-#define MEMOP(od) (od == M) /* TRUE if operand is a memory operand*/
-
-/* Classes of 960 intructions:
- * - each instruction falls into one class.
- * - each target architecture supports one or more classes.
- *
- * EACH CONSTANT MUST CONTAIN 1 AND ONLY 1 SET BIT!: see targ_has_iclass().
- */
-#define I_BASE 0x01 /* 80960 base instruction set */
-#define I_CX 0x02 /* 80960Cx instruction */
-#define I_DEC 0x04 /* Decimal instruction */
-#define I_FP 0x08 /* Floating point instruction */
-#define I_KX 0x10 /* 80960Kx instruction */
-#define I_MIL 0x20 /* Military instruction */
+#define OBJ_COFF_MAX_AUXENTRIES (2)
+#define TC_COUNT_RELOC(FIXP) (!(FIXP)->fx_done)
+#define TC_COFF_FIX2RTYPE(FIXP) tc_coff_fix2rtype (FIXP)
+#define TC_COFF_SIZEMACHDEP(FRAGP) tc_coff_sizemachdep (FRAGP)
+#define TC_COFF_SET_MACHINE(HDRS) tc_headers_hook (HDRS)
+extern void tc_headers_hook ();
+extern short tc_coff_fix2rtype ();
+extern int tc_coff_sizemachdep ();
/* MEANING OF 'n_other' in the symbol record.
*
* 'bal' entry point to the procedure (see following). These
* entries come from '.leafproc' directives in which two different
* symbols are specified (the first one is represented here).
- *
+ *
*
* n_other == N_BALNAME
* the symbol is the 'bal' entry point to a leaf procedure.
* Note that an N_CALLNAME entry *must* have a corresponding N_BALNAME entry,
* but not every N_BALNAME entry must have an N_CALLNAME entry.
*/
-#define N_CALLNAME (-1)
-#define N_BALNAME (-2)
-
+#define N_CALLNAME ((char)-1)
+#define N_BALNAME ((char)-2)
-/* i960 uses a custom relocation record. */
+/* i960 uses a custom relocation record. */
/* let obj-aout.h know */
#define CUSTOM_RELOC_FORMAT 1
-/* let a.out.gnu.h know */
+/* let aout_gnu.h know */
#define N_RELOCATION_INFO_DECLARED 1
-struct relocation_info {
- int r_address; /* File address of item to be relocated */
- unsigned
- r_index:24,/* Index of symbol on which relocation is based*/
- r_pcrel:1, /* 1 => relocate PC-relative; else absolute
- * On i960, pc-relative implies 24-bit
- * address, absolute implies 32-bit.
- */
- r_length:2, /* Number of bytes to relocate:
- * 0 => 1 byte
- * 1 => 2 bytes
- * 2 => 4 bytes -- only value used for i960
- */
- r_extern:1,
- r_bsr:1, /* Something for the GNU NS32K assembler */
- r_disp:1, /* Something for the GNU NS32K assembler */
- r_callj:1, /* 1 if relocation target is an i960 'callj' */
- nuthin:1; /* Unused */
-};
-
-/* hacks for tracking callj's */
-#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
+struct relocation_info
+ {
+ int r_address; /* File address of item to be relocated */
+ unsigned
+ r_index:24, /* Index of symbol on which relocation is based*/
+ r_pcrel:1, /* 1 => relocate PC-relative; else absolute
+ * On i960, pc-relative implies 24-bit
+ * address, absolute implies 32-bit.
+ */
+ r_length:2, /* Number of bytes to relocate:
+ * 0 => 1 byte
+ * 1 => 2 bytes
+ * 2 => 4 bytes -- only value used for i960
+ */
+ r_extern:1, r_bsr:1, /* Something for the GNU NS32K assembler */
+ r_disp:1, /* Something for the GNU NS32K assembler */
+ r_callj:1, /* 1 if relocation target is an i960 'callj' */
+ nuthin:1; /* Unused */
+ };
+
+#ifdef OBJ_COFF
+
+/* We store the bal information in the sy_tc field. */
+#define TC_SYMFIELD_TYPE symbolS *
+
+#define TC_ADJUST_RELOC_COUNT(FIXP,COUNT) \
+ { fixS *tcfixp = (FIXP); \
+ for (;tcfixp;tcfixp=tcfixp->fx_next) \
+ if (tcfixp->fx_tcbit && tcfixp->fx_addsy != 0) \
+ ++(COUNT); \
+ }
+#endif
-#define TC_S_IS_SYSPROC(s) ((1<=S_GET_OTHER(s)) && (S_GET_OTHER(s)<=32))
-#define TC_S_IS_BALNAME(s) (S_GET_OTHER(s) == N_BALNAME)
-#define TC_S_IS_CALLNAME(s) (S_GET_OTHER(s) == N_CALLNAME)
-#define TC_S_IS_BADPROC(s) ((S_GET_OTHER(s) != 0) && !TC_S_IS_CALLNAME(s) && !TC_S_IS_BALNAME(s) && !TC_S_IS_SYSPROC(s))
+extern int i960_validate_fix PARAMS ((struct fix *, segT, symbolS **));
+#define TC_VALIDATE_FIX(FIXP,SEGTYPE,LABEL) \
+ if (i960_validate_fix (FIXP, SEGTYPE, &add_symbolP) != 0) goto LABEL
+
+#ifdef OBJ_ELF
+#define TC_RELOC_RTSYM_LOC_FIXUP(FIX) \
+ ((FIX)->fx_addsy == NULL \
+ || (! S_IS_EXTERNAL ((FIX)->fx_addsy) \
+ && ! S_IS_WEAK ((FIX)->fx_addsy) \
+ && S_IS_DEFINED ((FIX)->fx_addsy) \
+ && ! S_IS_COMMON ((FIX)->fx_addsy)))
+#endif
-#define TC_S_SET_SYSPROC(s, p) (S_SET_OTHER((s), (p)+1))
-#define TC_S_GET_SYSPROC(s) (S_GET_OTHER(s)-1)
+#ifndef OBJ_ELF
+#define tc_fix_adjustable(FIXP) ((FIXP)->fx_bsr == 0)
+/* This arranges for gas/write.c to not apply a relocation if
+ tc_fix_adjustable() says it is not adjustable. */
+#define TC_FIX_ADJUSTABLE(fixP) tc_fix_adjustable (fixP)
+#else
+#define tc_fix_adjustable(FIXP) \
+ ((FIXP)->fx_bsr == 0 \
+ && ! S_IS_EXTERNAL ((FIXP)->fx_addsy) \
+ && ! S_IS_WEAK ((FIXP)->fx_addsy))
+#endif
-#define TC_S_FORCE_TO_BALNAME(s) (S_SET_OTHER((s), N_BALNAME))
-#define TC_S_FORCE_TO_CALLNAME(s) (S_SET_OTHER((s), N_CALLNAME))
-#define TC_S_FORCE_TO_SYSPROC(s) {;}
+extern void brtab_emit PARAMS ((void));
+#define md_end() brtab_emit ()
-#elif defined(OBJ_COFF)
+extern void reloc_callj ();
-#define TC_S_IS_SYSPROC(s) (S_GET_STORAGE_CLASS(s) == C_SCALL)
-#define TC_S_IS_BALNAME(s) (SF_GET_BALNAME(s))
-#define TC_S_IS_CALLNAME(s) (SF_GET_CALLNAME(s))
-#define TC_S_IS_BADPROC(s) (TC_S_IS_SYSPROC(s) && TC_S_GET_SYSPROC(s) < 0 && 31 < TC_S_GET_SYSPROC(s))
+extern void tc_set_bal_of_call PARAMS ((symbolS *, symbolS *));
-#define TC_S_SET_SYSPROC(s, p) ((s)->sy_symbol.ost_auxent[1].x_sc.x_stindx = (p))
-#define TC_S_GET_SYSPROC(s) ((s)->sy_symbol.ost_auxent[1].x_sc.x_stindx)
+extern struct symbol *tc_get_bal_of_call PARAMS ((symbolS *));
-#define TC_S_FORCE_TO_BALNAME(s) (SF_SET_BALNAME(s))
-#define TC_S_FORCE_TO_CALLNAME(s) (SF_SET_CALLNAME(s))
-#define TC_S_FORCE_TO_SYSPROC(s) (S_SET_STORAGE_CLASS((s), C_SCALL))
+extern void i960_handle_align ();
+#define HANDLE_ALIGN(FRAG) i960_handle_align (FRAG)
+#define NEED_FX_R_TYPE
+#define NO_RELOC -1
-#else /* switch on OBJ */
-you lose
-#endif /* witch on OBJ */
-
-#ifdef __STDC__
-
- void brtab_emit(void);
-void reloc_callj(); /* this is really reloc_callj(fixS *fixP) but I don't want to change header inclusion order. */
-void tc_set_bal_of_call(); /* this is really tc_set_bal_of_call(symbolS *callP, symbolS *balP) */
+#define md_operand(x)
-#else /* __STDC__ */
+extern const struct relax_type md_relax_table[];
+#define TC_GENERIC_RELAX_TABLE md_relax_table
-void brtab_emit();
-void reloc_callj();
-void tc_set_bal_of_call();
+#define LINKER_RELAXING_SHRINKS_ONLY
-#endif /* __STDC__ */
+#define TC_FIX_TYPE struct { unsigned bsr : 1; }
+#define fx_bsr tc_fix_data.bsr
+#define TC_INIT_FIX_DATA(F) ((F)->tc_fix_data.bsr = 0)
-char *_tc_get_bal_of_call(); /* this is really symbolS *tc_get_bal_of_call(symbolS *callP). */
-#define tc_get_bal_of_call(c) ((symbolS *) _tc_get_bal_of_call(c))
#endif
-
-/*
- * Local Variables:
- * comment-column: 0
- * fill-column: 131
- * End:
- */
-
-/* end of tc-i960.h */
projects / binutils.git / blobdiff