#!/bin/sh
+### WARNING: this file contains embedded tabs. Do not run untabify on this file.
+
# Configuration script
-# Copyright (C) 1988, 1990, 1991, 1992 Free Software Foundation, Inc.
+# Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999, 2000, 2001,
+# 2002 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-# Please email any bugs, comments, and/or additions to this file to:
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-# This file was written by K. Richard Pixley.
+# This file was originally written by K. Richard Pixley.
#
# Shell script to create proper links to machine-dependent files in
#
# If configure succeeds, it leaves its status in config.status.
# If configure fails after disturbing the status quo,
-# config.status is removed.
+# config.status is removed.
#
export PATH || (echo "OOPS, this isn't sh. Desperation time. I will feed myself to sh."; sh $0 $argv; kill $$)
Makefile=Makefile
Makefile_in=Makefile.in
-arguments=$*
+arguments=
+build_alias=
+cache_file=config.cache
+cache_file_option=
configdirs=
+extraconfigdirs=
+diroptions=
+enable_threads=no
+enable_shared=no
+enable_libstdcxx_v3=yes
exec_prefix=
exec_prefixoption=
fatal=
floating_point=default
gas=default
-host_alias=
+gcc_version=
+gcc_version_trigger=
+host_alias=NOHOST
host_makefile_frag=
-next_host=
-next_prefix=
-next_site=
-next_srcdir=
-next_target=
moveifchange=
-next_tmpdir=
norecursion=
-removing=
+other_options=
+package_makefile_frag=
+package_makefile_rules_frag=
prefix=/usr/local
progname=
program_prefix=
-program_prefix_option=
-silent=
+program_prefixoption=
+program_suffix=
+program_suffixoption=
+program_transform_name=
+program_transform_nameoption=
+redirect=
+removing=
site=
-site_option=
site_makefile_frag=
+site_option=
srcdir=
srctrigger=
subdirs=
-target_alias=
+target_alias=NOTARGET
target_makefile_frag=
-undefinedargs=
-verbose=
+undefs=NOUNDEFS
version="$Revision$"
x11=default
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+### we might need to use some other shell than /bin/sh for running subshells
+
+### If we are on Windows, search for the shell. This will permit people
+### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
+### without also having to set CONFIG_SHELL. This code will work when
+### using bash, which sets OSTYPE.
+case "${OSTYPE}" in
+*win32*)
+ if [ x${CONFIG_SHELL} = x ]; then
+ if [ ! -f /bin/sh ]; then
+ if [ x${SHELL} != x ] && [ -f ${SHELL} ]; then
+ CONFIG_SHELL=${SHELL}
+ export CONFIG_SHELL
+ else
+ for prog in sh sh.exe bash bash.exe; do
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/$prog; then
+ CONFIG_SHELL=$dir/$prog
+ export CONFIG_SHELL
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ test -n "${CONFIG_SHELL}" && break
+ done
+ fi
+ fi
+ fi
+ ;;
+esac
+
+config_shell=${CONFIG_SHELL-/bin/sh}
NO_EDIT="This file was generated automatically by configure. Do not edit."
## path. Since PATH might include "." we also add `pwd` to the end of PATH.
##
-PWD=`pwd`
progname=$0
+# if PWD already has a value, it is probably wrong.
+if [ -n "$PWD" ]; then PWD=`${PWDCMD-pwd}`; fi
case "${progname}" in
-/*) ;;
+/* | [A-Za-z]:[\\/]* ) ;;
*/*) ;;
*)
- PATH=$PATH:${PWD} ; export PATH
- ;;
+ PATH=$PATH:${PWD=`${PWDCMD-pwd}`} ; export PATH
+ ;;
esac
-for arg in $*;
+# Export original configure arguments for use by sub-configures.
+TOPLEVEL_CONFIGURE_ARGUMENTS="$progname $@"
+export TOPLEVEL_CONFIGURE_ARGUMENTS
+
+# Loop over all args
+
+while :
do
- # handle things that might have args following as separate words
- if [ -n "${next_prefix}" ] ; then prefix=${arg} ; prefixoption="-prefix=${prefix}" ; next_prefix=
- elif [ -n "${next_exec_prefix}" ] ; then
- exec_prefix=${arg}
- exec_prefixoption="-exec_prefix=${exec_prefix}"
- next_exec_prefix=
- elif [ -n "${next_site}" ] ; then site=${arg} ; site_option=-site=${site} ; next_site=
- # remove any possible trailing slash from srcdir. See note below.
- elif [ -n "${next_srcdir}" ] ; then srcdir=`echo ${arg} | sed -e 's:/$::'` ; next_srcdir=
- elif [ -n "${next_program_prefix}" ] ; then
- program_prefix=${arg}
- program_prefixoption="-program_prefix=${program_prefix}"
- next_program_prefix=
- elif [ -n "${next_target}" ] ; then
- next_target=
- case "${target_alias}" in
- "")
- target_alias="${arg}"
- ;;
- *)
- echo '***' Can only configure for one target at a time. 1>&2
- fatal=yes
- ;;
+
+# Break out if there are no more args
+ case $# in
+ 0)
+ break
+ ;;
+ esac
+
+# Get the first arg, and shuffle
+ option=$1
+ shift
+
+# Make all options have two hyphens
+ orig_option=$option # Save original for error messages
+ case $option in
+ --*) ;;
+ -*) option=-$option ;;
+ esac
+
+# Split out the argument for options that take them
+ case $option in
+ --*=*)
+ optarg=`echo $option | sed -e 's/^[^=]*=//'`
+ arguments="$arguments $option"
+ ;;
+# These options have mandatory values. Since we didn't find an = sign,
+# the value must be in the next argument
+ --bu* | --cache* | --ex* | --ho* | --pre* | --program-p* | --program-s* | --program-t* | --si* | --sr* | --ta* | --tm* | --x-* | --bi* | --sb* | --li* | --da* | --sy* | --sh* | --lo* | --in* | --ol* | --ma*)
+ optarg=$1
+ shift
+ arguments="$arguments $option=$optarg"
+ ;;
+ --v)
+ arguments="$arguments -v"
+ ;;
+ --*)
+ arguments="$arguments $option"
+ ;;
+ esac
+
+# Now, process the options
+ case $option in
+
+ --bi*)
+ bindir=$optarg
+ diroptions="$diroptions --bindir=$optarg"
+ ;;
+ --build* | --bu*)
+ case "$build_alias" in
+ "") build_alias=$optarg ;;
+ *) echo '***' Can only configure for one build machine at a time. 1>&2
+ fatal=yes
+ ;;
+ esac
+ ;;
+ --cache*)
+ cache_file=$optarg
+ ;;
+ --da*)
+ datadir=$optarg
+ diroptions="$diroptions --datadir=$optarg"
+ ;;
+ --disable-*)
+ enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'`
+ eval $enableopt=no
+ disableoptions="$disableoptions $option"
+ ;;
+ --enable-*)
+ case "$option" in
+ *=*) ;;
+ *) optarg=yes ;;
esac
- elif [ -n "${next_tmpdir}" ] ; then
- next_tmpdir=
- tmpdiroption="--tmpdir=${arg}"
- TMPDIR=${arg}
- else
- case ${arg} in
- -exec_prefix=* | --exec_prefix=* | --exec_prefi=* | --exec_pref=* | --exec_pre=* | --exec_pr=* | --exec_p=* | --exec_=* | --exec=* | --exe=* | --ex=* | --e=*)
- exec_prefix=`echo ${arg} | sed 's/^[-a-z_]*=//'`
- exec_prefixoption=${arg}
- ;;
- -exec_prefix | --exec_prefix | --exec_prefi | --exec_pref | --exec_pre | --exec_pr | --exec_p | --exec_ | --exec | --exe | --ex | --e)
- next_exec_prefix=yes
- ;;
- -gas | --g*)
- gas=yes
- ;;
- -help | --he*)
- fatal=true
- ;;
- -host=* | --host=* | --hos=* | --ho=*)
- case "${host_alias}" in
- "")
- host_alias="`echo ${arg} | sed 's/^[-a-z]*=//'`"
- ;;
- *)
- echo '***' Can only configure for one host at a time. 1>&2
- fatal=yes
- ;;
- esac
- ;;
- -nfp | --nf*)
- floating_point=no
- ;;
- -norecursion | --no*)
- norecursion=true
- ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=*)
- prefix=`echo ${arg} | sed 's/^[-a-z]*=//'`
- prefixoption=${arg}
- ;;
- -prefix | --prefix | --prefi | --pref | --pre)
- next_prefix=yes
- ;;
- -rm | --rm) removing=${arg} ;;
- -program_prefix=* | --program_prefix=* | --program_prefi=* | --program_pref=* | --program_pre=* | --program_pr=* | --program_p=* | --program_=* | --program=* | --progra=* | --progr=* | --prog=* | --pro=*)
- program_prefix=`echo ${arg} | sed 's/^[-a-z]*=//'`
- program_prefixoption=${arg}
- ;;
- -program_prefix | --program_prefix | --program_prefi | --program_pref | --program_pre | --program_pr | --program_p | --program_ | --program | --progra | --progr | --prog | --pro)
- next_program_prefix=yes
- ;;
- -s | -silent | --silent | --silen | --sile | --sil)
- silent=true
- arguments=`echo ${arguments} | sed "s:${arg}::"`
- ;;
- -site=* | --site=* | --sit=* | --si=*)
- site_option=${arg}
- site=`echo ${arg} | sed 's/^[-a-z]*=//'`
- ;;
- -site | --site | --sit)
- next_site=yes
- ;;
- # remove trailing slashes. Otherwise, when the file name gets
- # bolted into an object file as debug info, it has two slashes in
- # it. Ordinarily this is ok, but emacs takes double slash to
- # mean "forget the first part".
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=`echo ${arg} | sed 's/^[-a-z]*=//' | sed -e 's:/$::'`
- ;;
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- next_srcdir=yes
- ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=*)
- case "${target_alias}" in
- "") target_alias="`echo ${arg} | sed 's/^[-a-z]*=//'`" ;;
- *)
- echo '***' Can only configure for one target at a time. 1>&2
- fatal=yes
- ;;
- esac
- ;;
- -target | --target | --targe | --targ | --tar | --ta)
- next_target=yes
- ;;
- -tmpdir=* | --tmpdir=* | --tmpdi=* | --tmpd=* | --tmp=* | --tm=*)
- tmpdiroption=${arg}
- TMPDIR=`echo ${arg} | sed 's/^[-a-z]*=//'`
- ;;
- -tmpdir | --tmpdir | --tmpdi | --tmpd | --tmp | --tm)
- next_tmpdir=yes
- ;;
- -v | -verbose | --v)
- verbose=${arg}
- ;;
- -version | -V | --version | --V)
- echo "This is Cygnus Configure version" `echo ${version} | sed 's/[ $:]//g'`
- exit 0
- ;;
- -x | --x) ;;
- -* | --*)
- (echo ;
- echo "Unrecognized option: \"${arg}\"". ;
- echo) 1>&2
- fatal=true
- ;;
- *)
- case "${undefs}" in
- "")
- undefs="${arg}"
- ;;
- *)
- echo '***' Can only configure for one host and one target at a time. 1>&2
- fatal=yes
- ;;
- esac
- ;;
+ enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
+ eval "$enableopt=\$optarg"
+ enableoptions="$enableoptions '$option'"
+ ;;
+ --exec-prefix* | --ex*)
+ exec_prefix=$optarg
+ exec_prefixoption="--exec-prefix=$optarg"
+ ;;
+ --gas | --g*)
+ gas=yes
+ ;;
+ --help | --he*)
+ fatal=yes
+ ;;
+ --host* | --ho*)
+ case $host_alias in
+ NOHOST) host_alias=$optarg ;;
+ *) echo '***' Can only configure for one host at a time. 1>&2
+ fatal=yes
+ ;;
esac
- fi
+ ;;
+ --inc*)
+ includedir=$optarg
+ diroptions="$diroptions --includedir=$optarg"
+ ;;
+ --inf*)
+ infodir=$optarg
+ diroptions="$diroptions --infodir=$optarg"
+ ;;
+ --libd*)
+ libdir=$optarg
+ diroptions="$diroptions --libdir=$optarg"
+ ;;
+ --libe*)
+ libexecdir=$optarg
+ diroptions="$diroptions --libexecdir=$optarg"
+ ;;
+ --lo*)
+ localstatedir=$optarg
+ diroptions="$diroptions --localstatedir=$optarg"
+ ;;
+ --ma*)
+ mandir=$optarg
+ diroptions="$diroptions --mandir=$optarg"
+ ;;
+ --nfp | --nf*)
+ floating_point=no
+ floating_pointoption="--nfp"
+ ;;
+ --norecursion | --no*)
+ norecursion=yes
+ ;;
+ --ol*)
+ oldincludedir=$optarg
+ diroptions="$diroptions --oldincludedir=$optarg"
+ ;;
+ --prefix* | --pre*)
+ prefix=$optarg
+ prefixoption="--prefix=$optarg"
+ ;;
+ --program-prefix* | --program-p*)
+ program_prefix=$optarg
+ program_prefixoption="--program-prefix=$optarg"
+ ;;
+ --program-suffix* | --program-s*)
+ program_suffix=$optarg
+ program_suffixoption="--program-suffix=$optarg"
+ ;;
+ --program-transform-name* | --program-t*)
+ # Double any backslashes or dollar signs in the argument
+ program_transform_name="${program_transform_name} -e `echo ${optarg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`"
+ program_transform_nameoption="${program_transform_nameoption} --program-transform-name='$optarg'"
+ ;;
+ --rm)
+ removing=--rm
+ ;;
+ --sb*)
+ sbindir=$optarg
+ diroptions="$diroptions --sbindir=$optarg"
+ ;;
+ --sh*)
+ sharedstatedir=$optarg
+ diroptions="$diroptions --sharedstatedir=$optarg"
+ ;;
+ --silent | --sil* | --quiet | --q*)
+ redirect=">/dev/null"
+ verbose=--silent
+ ;;
+ --site* | --sit*)
+ site=$optarg
+ site_option="--site=$optarg"
+ ;;
+ --srcdir*/ | --sr*/)
+ # Remove trailing slashes. Otherwise, when the file name gets
+ # bolted into an object file as debug info, it has two slashes
+ # in it. Ordinarily this is ok, but emacs takes double slash
+ # to mean "forget the first part".
+ srcdir=`echo $optarg | sed -e 's:/$::'`
+ ;;
+ --srcdir* | --sr*)
+ srcdir=$optarg
+ ;;
+ --sy*)
+ sysconfdir=$optarg
+ diroptions="$diroptions --sysconfdir=$optarg"
+ ;;
+ --target* | --ta*)
+ case $target_alias in
+ NOTARGET) target_alias=$optarg ;;
+ *) echo '***' Can only configure for one target at a time. 1>&2
+ fatal=yes
+ ;;
+ esac
+ ;;
+ --tmpdir* | --tm*)
+ TMPDIR=$optarg
+ tmpdiroption="--tmpdir=$optarg"
+ ;;
+ --verbose | --v | --verb*)
+ redirect=
+ verbose=--verbose
+ ;;
+ --version | --V | --vers*)
+ echo "This is Cygnus Configure version" `echo ${version} | sed 's/[ $:]//g'`
+ exit 0
+ ;;
+ --with-*)
+ case "$option" in
+ *=*) ;;
+ *) optarg=yes ;;
+ esac
+
+ withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
+ eval $withopt="\$optarg"
+ withoptions="$withoptions $option"
+ ;;
+ --without-*)
+ withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'`
+ eval $withopt=no
+ withoutoptions="$withoutoptions $option"
+ ;;
+ --x) with_x=yes
+ withoptions="$withoptions --with-x"
+ ;;
+ --x-i* | --x-l*) other_options="$other_options $orig_option"
+ ;;
+ --*)
+ echo "configure: Unrecognized option: \"$orig_option\"; use --help for usage." >&2
+ exit 1
+ ;;
+ *)
+ case $undefs in
+ NOUNDEFS) undefs=$option ;;
+ *) echo '***' Can only configure for one host and one target at a time. 1>&2
+ fatal=yes
+ ;;
+ esac
+ ;;
+ esac
done
# process host and target
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+# configure --host=HOST --target=TARGET UNDEFS
+#
+# The rules are:
+# 1. You aren't allowed to specify --host, --target, and undefs at the
+# same time.
+# 2. Host defaults to undefs.
+# 3. If undefs is not specified, then host defaults to the current host,
+# as determined by config.guess.
+# 4. Target defaults to undefs.
+# 5. If undefs is not specified, then target defaults to host.
+
case "${fatal}" in
"")
-# # Complain if an arg is missing
-# if [ -z "${host_alias}" ] ; then
-# (echo ;
-# echo "configure: No HOST specified." ;
-# echo) 1>&2
-# fatal=true
-# fi
-
-### This is a bit twisted.
-### * if all three are specified, this is an error.
-### * if we have neither hosts, nor unadorned args, this is an error.
-### * if no hosts are specified, then the unadorned args are hosts, but if
-### there were none, this is an error.
-### * if no targets are specified, then the unadorned args are targets, but if
-### there were no unadorned args, then the hosts are also targets.
-
- if [ -n "${host_alias}" -a -n "${target_alias}" -a -n "${undefs}" ] ; then
- echo '***' Can only configure for one host and one target at a time. 1>&2
- fatal=yes
- elif [ -z "${host_alias}" -a -z "${undefs}" ] ; then
- echo '***' You must tell me for which host you want to configure. 1>&2
- fatal=yes
- else
- case "${host_alias}" in
- "") host_alias=${undefs} ;;
- *) ;;
+ # Make sure that host, target & undefs aren't all specified at the
+ # same time.
+ case $host_alias---$target_alias---$undefs in
+ NOHOST---*---* | *---NOTARGET---* | *---*---NOUNDEFS)
+ ;;
+ *) echo '***' Can only configure for one host and one target at a time. 1>&2
+ fatal=yes
+ break 2
+ ;;
+ esac
+
+ # Now, do defaulting for host.
+ case $host_alias in
+ NOHOST)
+ case $undefs in
+ NOUNDEFS)
+ # Neither --host option nor undefs were present.
+ # Call config.guess.
+ guesssys=`echo ${progname} | sed 's/configure$/config.guess/'`
+ if host_alias=`${config_shell} ${guesssys}`
+ then
+ # If the string we are going to use for
+ # the target is a prefix of the string
+ # we just guessed for the host, then
+ # assume we are running native, and force
+ # the same string for both target and host.
+ case $target_alias in
+ NOTARGET) ;;
+ *)
+ if expr $host_alias : $target_alias >/dev/null
+ then
+ host_alias=$target_alias
+ fi
+ ;;
+ esac
+ echo "Configuring for a ${host_alias} host."
+ arguments="--host=$host_alias $arguments"
+ else
+ echo 'Config.guess failed to determine the host type. You need to specify one.' 1>&2
+ fatal=yes
+ fi
+ ;;
+ *)
+ host_alias=$undefs
+ arguments="--host=$host_alias $arguments"
+ undefs=NOUNDEFS
+ ;;
esac
+ esac
- case "${target_alias}" in
- "")
- case "${undefs}" in
- "") target_alias=${host_alias} ;;
- *) target_alias=${undefs} ;;
- esac
+ # Do defaulting for target. If --target option isn't present, default
+ # to undefs. If undefs isn't present, default to host.
+ case $target_alias in
+ NOTARGET)
+ case $undefs in
+ NOUNDEFS)
+ target_alias=$host_alias
+ ;;
+ *)
+ target_alias=$undefs
+ arguments="--target=$target_alias $arguments"
;;
- *) ;;
esac
- fi
+ esac
;;
*) ;;
esac
if [ -n "${fatal}" -o "${host_alias}" = "help" ] ; then
- (echo "Usage: configure HOST" ;
- echo ;
- echo "Options: [defaults in brackets]" ;
- echo " -exec_prefix=MYDIR configure for installation of host dependent files into MYDIR. [\"/usr/local\"]" ;
- echo " -gas configure the compilers for use with gas. [native as]" ;
- echo " -help print this message. [normal config]" ;
- echo " -lang=LANG configure to build LANG. [gcc]" ;
- echo " -nfp configure the compilers default to soft floating point. [hard float]" ;
- echo " -norecursion configure this directory only. [recurse]" ;
- echo " -prefix=MYDIR configure for installation of host dependent files into MYDIR. [\"/usr/local\"]" ;
- echo " -program_prefix=FOO install programs with FOO prepended to their names. [ \"\" ]" ;
- echo " -site=SITE configure with site specific makefile for SITE" ;
- echo " -srcdir=DIR find the sources in DIR. [\".\" or \"..\"]" ;
- echo " -target=TARGET configure for TARGET. [TARGET = HOST]" ;
- echo " -tmpdir=TMPDIR create temporary files in TMPDIR. [ TMPDIR = \"/tmp\" ]" ;
- echo ;
- echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ;
- ) 1>&2
-
+ exec 1>&2
+ echo Usage: configure [OPTIONS] [HOST]
+ echo
+ echo Options: [defaults in brackets]
+ echo ' --prefix=MYDIR install into MYDIR [/usr/local]'
+ echo ' --exec-prefix=MYDIR install host-dependent files into MYDIR [/usr/local]'
+ echo ' --help print this message [normal config]'
+ echo ' --build=BUILD configure for building on BUILD [BUILD=HOST]'
+ echo ' --host=HOST configure for HOST [determined via config.guess]'
+ echo ' --norecursion configure this directory only [recurse]'
+ echo ' --program-prefix=FOO prepend FOO to installed program names [""]'
+ echo ' --program-suffix=FOO append FOO to installed program names [""]'
+ echo ' --program-transform-name=P transform installed names by sed pattern P [""]'
+ echo ' --site=SITE configure with site-specific makefile for SITE'
+ echo ' --srcdir=DIR find the sources in DIR [. or ..]'
+ echo ' --target=TARGET configure for TARGET [TARGET=HOST]'
+ echo ' --tmpdir=TMPDIR create temporary files in TMPDIR [/tmp]'
+ echo ' --nfp configure for software floating point [hard float]'
+ echo ' --with-FOO, --with-FOO=BAR package FOO is available (parameter BAR)'
+ echo ' --without-FOO package FOO is NOT available'
+ echo ' --enable-FOO, --enable-FOO=BAR include feature FOO (parameter BAR)'
+ echo ' --disable-FOO do not include feature FOO'
+ echo
+ echo 'Where HOST and TARGET are something like "sparc-sunos", "mips-sgi-irix5", etc.'
+ echo
if [ -r config.status ] ; then
cat config.status
fi
configsub=`echo ${progname} | sed 's/configure$/config.sub/'`
moveifchange=`echo ${progname} | sed 's/configure$/move-if-change/'`
+## the sed command below emulates the dirname command
+topsrcdir=`cd \`echo ${progname} | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'\`; ${PWDCMD-pwd}`
+
# this is a hack. sun4 must always be a valid host alias or this will fail.
-if ${configsub} sun4 >/dev/null 2>&1 ; then
- true
+if ${config_shell} ${configsub} sun4 >/dev/null 2>&1 ; then
+ true
else
- echo '***' cannot find config.sub. 1>&2
- exit 1
+ echo '***' cannot find config.sub. 1>&2
+ exit 1
fi
touch config.junk
-if ${moveifchange} config.junk config.trash ; then
- true
+if ${config_shell} ${moveifchange} config.junk config.trash ; then
+ true
else
- echo '***' cannot find move-if-change. 1>&2
- exit 1
+ echo '***' cannot find move-if-change. 1>&2
+ exit 1
fi
rm -f config.junk config.trash
case "${srcdir}" in
"")
- if [ -r configure.in ] ; then
+ if [ -r configure.in ] ; then
+ srcdir=.
+ else
+ if [ -r ${progname}.in ] ; then
+ srcdir=`echo ${progname} | sed 's:/configure$::'`
+ else
+ echo '***' "Can't find configure.in. Try using --srcdir=some_dir" 1>&2
+ exit 1
+ fi
+ fi
+ ;;
+*)
+ # Set srcdir to "." if that's what it is.
+ # This is important for multilib support.
+ if [ ! -d ${srcdir} ] ; then
+ echo "Invalid source directory ${srcdir}" >&2
+ exit 1
+ fi
+ pwd=`${PWDCMD-pwd}`
+ srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
+ if [ "${pwd}" = "${srcpwd}" ] ; then
srcdir=.
- else
- if [ -r ${progname}.in ] ; then
- srcdir=`echo ${progname} | sed 's:/configure$::'`
- else
- echo '***' "Can't find configure.in. Try using -srcdir=some_dir" 1>&2
- exit 1
- fi
fi
- ;;
-*) ;;
esac
### warn about some conflicting configurations.
case "${srcdir}" in
".") ;;
*)
- if [ -f ${srcdir}/config.status ] ; then
- echo '***' Cannot configure here in \"${PWD}\" when \"${srcdir}\" is currently configured. 1>&2
- exit 1
- fi
+ if [ -f ${srcdir}/config.status ] ; then
+ echo '***' Cannot configure here in \"${PWD=`${PWDCMD-pwd}`}\" when \"${srcdir}\" is currently configured. 1>&2
+ exit 1
+ fi
esac
# default exec_prefix
-case "${exec_prefix}" in
+case "${exec_prefixoption}" in
"") exec_prefix="\$(prefix)" ;;
*) ;;
esac
+# Define the trigger file to make sure configure will re-run whenever
+# the gcc version number changes.
+if [ "${with_gcc_version_trigger+set}" = set ]; then
+ gcc_version_trigger="$with_gcc_version_trigger"
+ gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
+else
+ # If gcc's sources are available, define the trigger file.
+ if [ -f ${topsrcdir}/gcc/version.c ] ; then
+ gcc_version_trigger=${topsrcdir}/gcc/version.c
+ gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
+ case "$arguments" in
+ *--with-gcc-version-trigger=$gcc_version_trigger* )
+ ;;
+ * )
+ # Make sure configure.in knows about this.
+ arguments="--with-gcc-version-trigger=$gcc_version_trigger $arguments"
+ ;;
+ esac
+ withoptions="--with-gcc-version-trigger=$gcc_version_trigger $withoptions"
+ fi
+fi
+
### break up ${srcdir}/configure.in.
case "`grep '^# per\-host:' ${srcdir}/configure.in`" in
"")
- echo '***' ${srcdir}/configure.in has no "per-host:" line. 1>&2
- exit 1
- ;;
+ echo '***' ${srcdir}/configure.in has no \"per-host:\" line. 1>&2
+ # Check for a directory that's been converted to use autoconf since
+ # it was last configured.
+ if grep AC_OUTPUT ${srcdir}/configure.in >/dev/null ; then
+ echo '***' Hmm, looks like this directory has been autoconfiscated. 1>&2
+ if [ -r ${srcdir}/configure ] ; then
+ echo '***' Running the local configure script. 1>&2
+ case "${cache_file}" in
+ "") cache_file_option= ;;
+ *) cache_file_option="--cache-file=${cache_file}" ;;
+ esac
+ srcdiroption="--srcdir=${srcdir}"
+ case "${build_alias}" in
+ "") buildopt= ;;
+ *) buildopt="--build=${build_alias}" ;;
+ esac
+ eval exec ${config_shell} ${srcdir}/configure ${verbose} \
+ ${buildopt} --host=${host_alias} --target=${target_alias} \
+ ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
+ ${srcdiroption} ${diroptions} \
+ ${program_prefixoption} ${program_suffixoption} \
+ ${program_transform_nameoption} ${site_option} \
+ ${withoptions} ${withoutoptions} \
+ ${enableoptions} ${disableoptions} ${floating_pointoption} \
+ ${cache_file_option} ${removing} ${other_options} ${redirect}
+ else
+ echo '***' There is no configure script present though. 1>&2
+ fi
+ fi
+ exit 1
+ ;;
*) ;;
esac
case "`grep '^# per\-target:' ${srcdir}/configure.in`" in
"")
- echo '***' ${srcdir}/configure.in has no "per-target:" line. 1>&2
- exit 1
- ;;
+ echo '***' ${srcdir}/configure.in has no \"per-target:\" line. 1>&2
+ exit 1
+ ;;
*) ;;
esac
*) ;;
esac
-# keep this filename short for &%*%$*# 14 char file names
-tmpfile=${TMPDIR}/cONf$$
-trap "rm -f ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos" 0
+# keep this filename short for &%*%$*# 14 char file names and 8+3 file names
+tmpdir=${TMPDIR}/cNf$$
+mkdir ${tmpdir} || exit 1
+tmpfile=${tmpdir}/cNf$$
+# Note that under many versions of sh a trap handler for 0 will *override* any
+# exit status you explicitly specify! At this point, the only non-error exit
+# is at the end of the script; these actions are duplicated there, minus
+# the "exit 1". Don't use "exit 0" anywhere after this without resetting the
+# trap handler, or you'll lose.
+trap "rm -rf Makefile.tem ${tmpdir}; exit 1" 0 1 2 15
# split ${srcdir}/configure.in into common, per-host, per-target,
# and post-target parts. Post-target is optional.
### do common part of configure.in
+# If the language specific compiler does not exist, but the "gcc" directory does,
+# we will skip this directory; in this case the sub-directory's common part
+# of configure.in will create a small shell script "skip-this-dir" containing
+# commands to completely clean up any temporary or created files.
+
. ${tmpfile}.com
+if test -f skip-this-dir; then
+ # Perform the same cleanup as the trap handler, minus the "exit 1" of course,
+ # and reset the trap handler.
+ trap 0
+ rm -rf Makefile* ${tmpdir}
+ # Execute the final clean-up actions
+ ${config_shell} skip-this-dir
+ # and stop configuring this directory.
+ exit 0
+fi
+
# some sanity checks on configure.in
case "${srctrigger}" in
"")
- echo '***' srctrigger not set in ${PWD}/configure.in. 1>&2
- exit 1
- ;;
+ echo '***' srctrigger not set in ${PWD=`${PWDCMD-pwd}`}/configure.in. 1>&2
+ exit 1
+ ;;
*) ;;
esac
-result=`${configsub} ${host_alias}`
-host_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-host_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-host_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+case "${build_alias}" in
+"")
+ if result=`${config_shell} ${configsub} ${host_alias}` ; then
+ build_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+ build_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+ build_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ build=${build_cpu}-${build_vendor}-${build_os}
+ build_alias=${host_alias}
+ fi
+ ;;
+*)
+ if result=`${config_shell} ${configsub} ${build_alias}` ; then
+ buildopt="--build=${build_alias}"
+ build_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+ build_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+ build_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ build=${build_cpu}-${build_vendor}-${build_os}
+ else
+ echo "Unrecognized build system name ${build_alias}." 1>&2
+ exit 1
+ fi
+ ;;
+esac
+
+if result=`${config_shell} ${configsub} ${host_alias}` ; then
+ true
+else
+ echo "Unrecognized host system name ${host_alias}." 1>&2
+ exit 1
+fi
+host_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
host=${host_cpu}-${host_vendor}-${host_os}
. ${tmpfile}.hst
-result=`${configsub} ${target_alias}`
-target_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-target_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-target_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+if result=`${config_shell} ${configsub} ${target_alias}` ; then
+ true
+else
+ echo "Unrecognized target system name ${target_alias}." 1>&2
+ exit 1
+fi
+target_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
target=${target_cpu}-${target_vendor}-${target_os}
. ${tmpfile}.tgt
# Find the source files, if location was not specified.
case "${srcdir}" in
"")
- srcdirdefaulted=1
- srcdir=.
- if [ ! -r ${srctrigger} ] ; then
- srcdir=..
- fi
- ;;
+ srcdirdefaulted=1
+ srcdir=.
+ if [ ! -r ${srctrigger} ] ; then
+ srcdir=..
+ fi
+ ;;
*) ;;
esac
if [ ! -r ${srcdir}/${srctrigger} ] ; then
- case "${srcdirdefaulted}" in
- "") echo '***' "${progname}: Can't find ${srcname} sources in ${PWD}/${srcdir}" 1>&2 ;;
- *) echo '***' "${progname}: Can't find ${srcname} sources in ${PWD}/. or ${PWD}/.." 1>&2 ;;
- esac
+ case "${srcdirdefaulted}" in
+ "") echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`${PWDCMD-pwd}`}/${srcdir}" 1>&2 ;;
+ *) echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`${PWDCMD-pwd}`}/. or ${PWD=`${PWDCMD-pwd}`}/.." 1>&2 ;;
+ esac
- echo '***' \(At least ${srctrigger} is missing.\) 1>&2
- exit 1
+ echo '***' \(At least ${srctrigger} is missing.\) 1>&2
+ exit 1
+fi
+
+# Some systems (e.g., one of the i386-aix systems the gas testers are
+# using) don't handle "\$" correctly, so don't use it here.
+tooldir='$(exec_prefix)'/${target_alias}
+
+if [ "${host_alias}" != "${target_alias}" ] ; then
+ if [ "${program_prefixoption}" = "" ] ; then
+ if [ "${program_suffixoption}" = "" ] ; then
+ if [ "${program_transform_nameoption}" = "" ] ; then
+ program_prefix=${target_alias}- ;
+ fi
+ fi
+ fi
+fi
+
+# Merge program_prefix and program_suffix onto program_transform_name.
+# (program_suffix used to use $, but it's hard to preserve $ through both
+# make and sh.)
+if [ "${program_suffix}" != "" ] ; then
+ program_transform_name="-e s,\\\\(.*\\\\),\\\\1${program_suffix}, ${program_transform_name}"
+fi
+
+if [ "${program_prefix}" != "" ] ; then
+ program_transform_name="-e s,^,${program_prefix}, ${program_transform_name}"
+fi
+
+# If CC and CXX are not set in the environment, and the Makefile
+# exists, try to extract them from it. This is to handle running
+# ./config.status by hand.
+if [ -z "${CC}" ] && [ -r Makefile ]; then
+ sed -n -e ':loop
+/\\$/ N
+s/\\\n//g
+t loop
+/^CC[ ]*=/ s/CC[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc
+ CC=`tail -1 Makefile.cc`
+ rm -f Makefile.cc
+fi
+
+if [ -z "${CFLAGS}" ] && [ -r Makefile ]; then
+ sed -n -e ':loop
+/\\$/ N
+s/\\\n//g
+t loop
+/^CFLAGS[ ]*=/ s/CFLAGS[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc
+ CFLAGS=`tail -1 Makefile.cc`
+ rm -f Makefile.cc
+fi
+
+if [ -z "${CXX}" ] && [ -r Makefile ]; then
+ sed -n -e ':loop
+/\\$/ N
+s/\\\n//g
+t loop
+/^CXX[ ]*=/ s/CXX[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc
+ CXX=`tail -1 Makefile.cc`
+ rm -f Makefile.cc
+fi
+
+if [ -z "${CXXFLAGS}" ] && [ -r Makefile ]; then
+ sed -n -e ':loop
+/\\$/ N
+s/\\\n//g
+t loop
+/^CXXFLAGS[ ]*=/ s/CXXFLAGS[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc
+ CXXFLAGS=`tail -1 Makefile.cc`
+ rm -f Makefile.cc
+fi
+
+# Generate a default definition for YACC. This is used if the makefile can't
+# locate bison or byacc in objdir.
+
+for prog in 'bison -y' byacc yacc
+do
+ set dummy $prog; tmp=$2
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/$tmp; then
+ DEFAULT_YACC="$prog"
+ break
+ fi
+ done
+ IFS="$save_ifs"
+
+ test -n "$DEFAULT_YACC" && break
+done
+
+# Generate a default definition for M4. This is used if the makefile can't
+# locate m4 in objdir.
+
+for prog in gm4 gnum4 m4
+do
+ set dummy $prog; tmp=$2
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/$tmp; then
+ DEFAULT_M4="$prog"
+ break
+ fi
+ done
+ IFS="$save_ifs"
+
+ test -n "$DEFAULT_M4" && break
+done
+
+# Generate a default definition for LEX. This is used if the makefile can't
+# locate flex in objdir.
+
+for prog in flex lex
+do
+ set dummy $prog; tmp=$2
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/$tmp; then
+ DEFAULT_LEX="$prog"
+ break
+ fi
+ done
+ IFS="$save_ifs"
+
+ test -n "$DEFAULT_LEX" && break
+done
+
+if [ "${build}" != "${host}" ]; then
+ # If we are doing a Canadian Cross, in which the host and build systems
+ # are not the same, we set reasonable default values for the tools.
+
+ tools="AR AR_FOR_TARGET AS AS_FOR_TARGET BISON CC_FOR_BUILD"
+ tools="${tools} CC_FOR_TARGET CXX_FOR_TARGET GCJ_FOR_TARGET"
+ tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET BUILD_PREFIX"
+ tools="${tools} BUILD_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM"
+ tools="${tools} NM_FOR_TARGET RANLIB RANLIB_FOR_TARGET"
+ tools="${tools} WINDRES WINDRES_FOR_TARGET YACC"
+ tools="${tools} OBJCOPY OBJDUMP"
+
+ for var in ${tools}; do
+ if eval [ -z \"\$${var}\" ] && [ -r Makefile ]; then
+ sed -n -e ':loop
+/\\$/ N
+s/\\\n//g
+t loop
+/^'"${var}"'[ ]*=/ s/'"${var}"'[ ]*=[ ]*\(.*\)/\1/p' \
+ < Makefile > Makefile.v
+ t=`tail -1 Makefile.v`
+ if [ -n "${t}" ]; then
+ eval "${var}=\${t}"
+ fi
+ rm -f Makefile.v
+ fi
+ done
+
+ AR=${AR-${host_alias}-ar}
+ AR_FOR_TARGET=${AR_FOR_TARGET-${target_alias}-ar}
+ AS=${AS-${host_alias}-as}
+ AS_FOR_TARGET=${AS_FOR_TARGET-${target_alias}-as}
+ BISON=${BISON-bison}
+ CC=${CC-${host_alias}-gcc}
+ CFLAGS=${CFLAGS-"-g -O2"}
+ CXX=${CXX-${host_alias}-c++}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+ CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
+ CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
+ CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
+ GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
+ DLLTOOL=${DLLTOOL-${host_alias}-dlltool}
+ DLLTOOL_FOR_TARGET=${DLLTOOL_FOR_TARGET-${target_alias}-dlltool}
+ GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
+ BUILD_PREFIX=${build_alias}-
+ BUILD_PREFIX_1=${build_alias}-
+ LD=${LD-${host_alias}-ld}
+ LD_FOR_TARGET=${LD_FOR_TARGET-${target_alias}-ld}
+ MAKEINFO=${MAKEINFO-makeinfo}
+ NM=${NM-${host_alias}-nm}
+ NM_FOR_TARGET=${NM_FOR_TARGET-${target_alias}-nm}
+ RANLIB=${RANLIB-${host_alias}-ranlib}
+ RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET-${target_alias}-ranlib}
+ WINDRES=${WINDRES-${host_alias}-windres}
+ WINDRES_FOR_TARGET=${WINDRES_FOR_TARGET-${target_alias}-windres}
+ OBJCOPY=${OBJCOPY-${host_alias}-objcopy}
+ OBJDUMP=${OBJDUMP-${host_alias}-objdump}
+
+ if [ -z "${YACC}" ]; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/bison; then
+ YACC="bison -y"
+ break
+ fi
+ if test -f $dir/byacc; then
+ YACC=byacc
+ break
+ fi
+ if test -f $dir/yacc; then
+ YACC=yacc
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if [ -z "${YACC}" ]; then
+ YACC="bison -y"
+ fi
+ fi
+
+ if [ -z "${LEX}" ]; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/flex; then
+ LEX=flex
+ break
+ fi
+ if test -f $dir/lex; then
+ LEX=lex
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ LEX=${LEX-flex}
+ fi
+
+ # Export variables which autoconf might try to set.
+ export AS
+ export AR
+ export CC_FOR_BUILD
+ export DLLTOOL
+ export LD
+ export NM
+ export RANLIB
+ export WINDRES
+ export OBJCOPY
+ export OBJDUMP
+else
+ # If CC is still not set, try to get gcc.
+ if [ -z "${CC}" ]; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/gcc; then
+ CC="gcc"
+ echo 'void f(){}' > conftest.c
+ if test -z "`${CC} -g -c conftest.c 2>&1`"; then
+ CFLAGS=${CFLAGS-"-g -O2"}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+ else
+ CFLAGS=${CFLAGS-"-O2"}
+ CXXFLAGS=${CXXFLAGS-"-O2"}
+ fi
+ rm -f conftest*
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ CC=${CC-cc}
+ else
+ if test -z "${CFLAGS}"; then
+ # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC
+ # is set to a version of gcc.
+ case "${CC}" in
+ *gcc)
+ echo 'void f(){}' > conftest.c
+ if test -z "`${CC} -g -c conftest.c 2>&1`"; then
+ CFLAGS=${CFLAGS-"-g -O2"}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+ else
+ CFLAGS=${CFLAGS-"-O2"}
+ CXXFLAGS=${CXXFLAGS-"-O2"}
+ fi
+ rm -f conftest*
+ ;;
+ esac
+ fi
+ fi
+
+ CXX=${CXX-"c++"}
+ CFLAGS=${CFLAGS-"-g"}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+fi
+
+export CC
+export CXX
+export CFLAGS
+export CXXFLAGS
+
+all_build_modules=
+if test x"${build_alias}" != x"${host_alias}"
+then
+ all_build_modules='$(ALL_BUILD_MODULES_LIST)'
fi
for subdir in . ${subdirs} ; do
### figure out what to do with srcdir
case "${srcdir}" in
- ".") # no -srcdir option. We're building in place.
- makesrcdir=. ;;
- /*) # absolute path
- makesrcdir=`echo ${srcdir}/${subdir} | sed -e 's|/\.$||'`
- ;;
- *) # otherwise relative
- case "${subdir}" in
- .) makesrcdir=${srcdir} ;;
- *) makesrcdir=../${srcdir}/${subdir} ;;
- esac
- ;;
+ ".") # no -srcdir option. We're building in place.
+ makesrcdir=. ;;
+ /* | [A-Za-z]:[\\/]* ) # absolute path
+ makesrcdir=`echo ${srcdir}/${subdir} | sed -e 's|/\.$||'`
+ ;;
+ *) # otherwise relative
+ case "${subdir}" in
+ .) makesrcdir=${srcdir} ;;
+ *) makesrcdir=${invsubdir}${srcdir}/${subdir} ;;
+ esac
+ ;;
esac
if [ "${subdir}/" != "./" ] ; then
- Makefile=${subdir}/Makefile
+ Makefile=${subdir}/Makefile
fi
if [ ! -d ${subdir} ] ; then
- mkdir ${subdir}
+ if mkdir ${subdir} ; then
+ true
+ else
+ echo '***' "${progname}: could not make ${PWD=`${PWDCMD-pwd}`}/${subdir}" 1>&2
+ exit 1
+ fi
fi
case "${removing}" in
"")
- if [ -n "${verbose}" -o -z "${silent}" ] ; then
- echo Building in ${subdir}
- fi
- # FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
- # Set up the list of links to be made.
- # ${links} is the list of link names, and ${files} is the list of names to link to.
-
- # Make the links.
- configlinks="${links}"
- mv -f config.status config.back
- while [ -n "${files}" ] ; do
- # set file to car of files, files to cdr of files
- set ${files}; file=$1; shift; files=$*
- set ${links}; link=$1; shift; links=$*
-
- if [ ! -r ${srcdir}/${file} ] ; then
- echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
- echo '***' "since the file \"${file}\" does not exist." 1>&2
- exit 1
- fi
+ case "${subdir}" in
+ .) ;;
+ *) eval echo Building in ${subdir} ${redirect} ;;
+ esac
+
+ # FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
+ # Set up the list of links to be made.
+ # ${links} is the list of link names, and ${files} is the list of names to link to.
+
+ # Make the links.
+ configlinks="${links}"
+ if [ -r ${subdir}/config.status ] ; then
+ mv -f ${subdir}/config.status ${subdir}/config.back
+ fi
+ while [ -n "${files}" ] ; do
+ # set file to car of files, files to cdr of files
+ set ${files}; file=$1; shift; files=$*
+ set ${links}; link=$1; shift; links=$*
+
+ if [ ! -r ${srcdir}/${file} ] ; then
+ if [ ! -r ${file} ] ; then
+
+ echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
+ echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
+ exit 1
+ else
+ srcfile=${file}
+ fi
+ else
+ srcfile=${srcdir}/${file}
+ fi
- ${remove} -f ${link}
+ ${remove} -f ${link}
# Make a symlink if possible, otherwise try a hard link
- ${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link}
-
- if [ ! -r ${link} ] ; then
- echo '***' "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
- exit 1
+ if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
+ true
+ else
+ # We need to re-remove the file because Lynx leaves a
+ # very strange directory there when it fails an NFS symlink.
+ ${remove} -r -f ${link}
+ ${hard_link} ${srcfile} ${link}
fi
+ if [ ! -r ${link} ] ; then
+ echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
+ exit 1
+ fi
- case "${verbose}" in
- "") ;;
- *) echo "Linked \"${link}\" to \"${srcdir}/${file}\"." ;;
- esac
- done
+ echo "Linked \"${link}\" to \"${srcfile}\"."
+ done
- # Create a .gdbinit file which runs the one in srcdir
- # and tells GDB to look there for source files.
+ # Create a .gdbinit file which runs the one in srcdir
+ # and tells GDB to look there for source files.
- if [ -r ${srcdir}/${subdir}/.gdbinit ] ; then
- case ${srcdir} in
- .)
- ;;
- *) cat > ${subdir}/.gdbinit <<EOF
+ if [ -r ${srcdir}/${subdir}/.gdbinit ] ; then
+ case ${srcdir} in
+ .) ;;
+ *) cat > ${subdir}/.gdbinit <<EOF
# ${NO_EDIT}
-dir .
dir ${makesrcdir}
+dir .
source ${makesrcdir}/.gdbinit
EOF
- ;;
- esac
- fi
-
- # Install a makefile, and make it set VPATH
- # if necessary so that the sources are found.
- # Also change its value of srcdir.
- # NOTE: Makefile generation constitutes the majority of the time in configure. Hence, this section has
- # been somewhat optimized and is perhaps a bit twisty.
-
- # code is order so as to try to sed the smallest input files we know.
-
- # the three makefile fragments MUST end up in the resulting Makefile in this order: target, host, and site.
- # so do these separately because I don't trust the order of sed -e expressions.
-
- # Conditionalize for this site from "Makefile.in" (or whatever it's called) into Makefile.tem
- rm -f Makefile.tem
- case "${site}" in
- "") cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem ;;
- *)
- site_makefile_frag=${srcdir}/config/ms-${site}
-
- if [ -f ${site_makefile_frag} ] ; then
- sed -e "/^####/ r ${site_makefile_frag}" ${srcdir}/${subdir}/${Makefile_in} \
- > ${subdir}/Makefile.tem
- else
- cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem
- site_makefile_frag=
- fi
- ;;
- esac
- # working copy now in ${subdir}/Makefile.tem
-
- # Conditionalize the makefile for this host.
- rm -f ${Makefile}
- case "${host_makefile_frag}" in
- "") mv ${subdir}/Makefile.tem ${Makefile} ;;
- *)
- if [ ! -f ${host_makefile_frag} ] ; then
- host_makefile_frag=${srcdir}/${host_makefile_frag}
- fi
- if [ -f ${host_makefile_frag} ] ; then
- sed -e "/^####/ r ${host_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile}
- else
- echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2
- echo '***' is missing in ${PWD}. 1>&2
- mv ${subdir}/Makefile.tem ${Makefile}
- fi
- esac
- # working copy now in ${Makefile}
-
- # Conditionalize the makefile for this target.
- rm -f Makefile.tem
- case "${target_makefile_frag}" in
- "") mv ${Makefile} ${subdir}/Makefile.tem ;;
- *)
- target_makefile_frag=${srcdir}/${target_makefile_frag}
- if [ -f ${target_makefile_frag} ] ; then
- sed -e "/^####/ r ${target_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
- else
- mv ${Makefile} ${subdir}/Makefile.tem
- target_makefile_frag=
- fi
- ;;
- esac
- # real copy now in ${subdir}/Makefile.tem
-
- # prepend warning about editting, and a bunch of variables.
- rm -f ${Makefile}
- cat > ${Makefile} <<EOF
+ ;;
+ esac
+ fi
+
+ # Install a makefile, and make it set VPATH
+ # if necessary so that the sources are found.
+ # Also change its value of srcdir.
+ # NOTE: Makefile generation constitutes the majority of the time in configure. Hence, this section has
+ # been somewhat optimized and is perhaps a bit twisty.
+
+ # code is order so as to try to sed the smallest input files we know.
+ # so do these separately because I don't trust the order of sed -e expressions.
+
+ # the five makefile fragments MUST end up in the resulting Makefile in this order:
+ # package macros, target, host, site, and package rules.
+
+ if [ -f ${srcdir}/${subdir}/${Makefile_in} ] ; then
+
+ # Conditionalize the makefile for this package from "Makefile.in" (or whatever it's called) into Makefile.tem.
+ rm -f ${subdir}/${Makefile}.tem
+ case "${package_makefile_rules_frag}" in
+ "") cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem ;;
+ *)
+ if [ ! -f ${package_makefile_rules_frag} ] ; then
+ package_makefile_rules_frag=${srcdir}/${package_makefile_rules_frag}
+ fi
+ if [ -f ${package_makefile_rules_frag} ] ; then
+ sed -e "/^####/ r ${package_makefile_rules_frag}" ${srcdir}/${subdir}/${Makefile_in} > ${Makefile}.tem
+ else
+ echo '***' Expected package makefile rules fragment \"${package_makefile_rules_frag}\" 1>&2
+ echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
+ cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem
+ fi
+ esac
+ # working copy now in ${Makefile}.tem
+
+ # Conditionalize for this site.
+ rm -f ${Makefile}
+ case "${site}" in
+ "") mv ${subdir}/Makefile.tem ${Makefile} ;;
+ *)
+ site_makefile_frag=${srcdir}/config/ms-${site}
+
+ if [ -f ${site_makefile_frag} ] ; then
+ sed -e "/^####/ r ${site_makefile_frag}" ${subdir}/Makefile.tem \
+ > ${Makefile}
+ else
+ mv ${subdir}/Makefile.tem ${Makefile}
+ site_makefile_frag=
+ fi
+ ;;
+ esac
+ # working copy now in ${Makefile}
+
+ # Conditionalize the makefile for this host.
+ rm -f ${subdir}/Makefile.tem
+ case "${host_makefile_frag}" in
+ "") mv ${Makefile} ${subdir}/Makefile.tem ;;
+ *)
+ if [ ! -f ${host_makefile_frag} ] ; then
+ host_makefile_frag=${srcdir}/${host_makefile_frag}
+ fi
+ if [ -f ${host_makefile_frag} ] ; then
+ sed -e "/^####/ r ${host_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
+ else
+ echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2
+ echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
+ mv ${Makefile} ${subdir}/Makefile.tem
+ fi
+ esac
+ # working copy now in ${subdir)/Makefile.tem
+
+ # Conditionalize the makefile for this target.
+ rm -f ${Makefile}
+ case "${target_makefile_frag}" in
+ "") mv ${subdir}/Makefile.tem ${Makefile} ;;
+ *)
+ if [ ! -f ${target_makefile_frag} ] ; then
+ target_makefile_frag=${srcdir}/${target_makefile_frag}
+ fi
+ if [ -f ${target_makefile_frag} ] ; then
+ sed -e "/^####/ r ${target_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile}
+ else
+ mv ${subdir}/Makefile.tem ${Makefile}
+ target_makefile_frag=
+ fi
+ ;;
+ esac
+ # working copy now in ${Makefile}
+
+ # Emit the default values of this package's macros.
+ rm -f ${subdir}/Makefile.tem
+ case "${package_makefile_frag}" in
+ "") mv ${Makefile} ${subdir}/Makefile.tem ;;
+ *)
+ if [ ! -f ${package_makefile_frag} ] ; then
+ package_makefile_frag=${srcdir}/${package_makefile_frag}
+ fi
+ if [ -f ${package_makefile_frag} ] ; then
+ sed -e "/^####/ r ${package_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
+ else
+ echo '***' Expected package makefile fragment \"${package_makefile_rules_frag}\" 1>&2
+ echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
+ mv ${Makefile} ${subdir}/Makefile.tem
+ fi
+ esac
+ # real copy now in ${subdir}/Makefile.tem
+
+ # prepend warning about editing, and a bunch of variables.
+ rm -f ${Makefile}
+ cat > ${Makefile} <<EOF
# ${NO_EDIT}
VPATH = ${makesrcdir}
links = ${configlinks}
host_cpu = ${host_cpu}
host_vendor = ${host_vendor}
host_os = ${host_os}
+host_canonical = ${host_cpu}-${host_vendor}-${host_os}
target_alias = ${target_alias}
target_cpu = ${target_cpu}
target_vendor = ${target_vendor}
target_os = ${target_os}
+target_canonical = ${target_cpu}-${target_vendor}-${target_os}
EOF
- if [ "${target_makefile_frag}" != "" ] ; then
- echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile}
- fi
- if [ "${host_makefile_frag}" != "" ] ; then
- echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile}
- fi
- if [ "${site_makefile_frag}" != "" ] ; then
- echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
- fi
-
- # fixme: this shouldn't be in configure.
- # Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
- case "${host_alias}" in
- "${target_alias}")
- tooldir='$(libdir)'
- echo "ALL=all.internal" >> ${Makefile}
- ;;
- *)
- echo "CROSS=-DCROSS_COMPILE" >> ${Makefile}
- echo "ALL=all.cross" >> ${Makefile}
- case "${program_prefix}" in
- "") program_prefix=${target_alias}- ;;
- *) ;;
- esac
-
- tooldir="\$(libdir)/${target_alias}"
- ;;
- esac
-
- # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS,
- # remove any form feeds.
- if [ -z "${subdirs}" ]; then
- sed -e "s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:" \
- -e "s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:" \
- ${subdir}/Makefile.tem > ${subdir}/Makefile.tem2
- mv ${subdir}/Makefile.tem2 ${subdir}/Makefile.tem
- fi
- sed -e "s:^prefix[ ]*=.*$:prefix = ${prefix}:" \
- -e "s:^exec_prefix[ ]*=.*$:exec_prefix = ${exec_prefix}:" \
- -e "s:^srcdir[ ]*=.*$:srcdir = ${makesrcdir}:" \
- -e "s/\f//" \
- -e "s:^program_prefix[ ]*=.*$:program_prefix = ${program_prefix}:" \
- -e "s:^tooldir[ ]*=.*$:tooldir = ${tooldir}:" \
- ${subdir}/Makefile.tem >> ${Makefile}
- # final copy now in ${Makefile}
-
- rm -f ${subdir}/Makefile.tem
-
- if [ -n "${verbose}" -o -z "${silent}" ] ; then
- case "${host_makefile_frag}" in
- "") using= ;;
- *) using="and \"${host_makefile_frag}\"" ;;
- esac
-
- case "${target_makefile_frag}" in
- "") ;;
- *) using="${using} and \"${target_makefile_frag}\"" ;;
- esac
-
- case "${site_makefile_frag}" in
- "") ;;
- *) using="${using} and \"${site_makefile_frag}\"" ;;
- esac
-
- echo "Created \"${Makefile}\" in" ${PWD} `echo "${using}" | sed 's/and/using/'`
- fi
-
- . ${tmpfile}.pos
-
- # describe the chosen configuration in config.status.
- # Make that file a shellscript which will reestablish
- # the same configuration. Used in Makefiles to rebuild
- # Makefiles.
-
- case "${norecursion}" in
- "") arguments="${arguments} -norecursion" ;;
- *) ;;
- esac
-
- if [ ${subdir} = . ] ; then
- echo "#!/bin/sh
+ case "${build}" in
+ "") ;;
+ *) cat >> ${Makefile} << EOF
+build_alias = ${build_alias}
+build_cpu = ${build_cpu}
+build_vendor = ${build_vendor}
+build_os = ${build_os}
+build_canonical = ${build_cpu}-${build_vendor}-${build_os}
+EOF
+ esac
+
+ case "${package_makefile_frag}" in
+ "") ;;
+ /* | [A-Za-z]:[\\/]* ) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;;
+ *) echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;;
+ esac
+
+ case "${target_makefile_frag}" in
+ "") ;;
+ /* | [A-Za-z]:[\\/]* ) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;;
+ *) echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;;
+ esac
+
+ case "${host_makefile_frag}" in
+ "") ;;
+ /* | [A-Za-z]:[\\/]* ) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;;
+ *) echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile} ;;
+ esac
+
+ if [ "${site_makefile_frag}" != "" ] ; then
+ echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
+ fi
+
+ echo enable_shared = ${enable_shared} >> ${Makefile}
+ echo enable_threads = ${enable_threads} >> ${Makefile}
+ # record if we want to rumtime library stuff installed in libsubdir.
+ if test -z "${enable_version_specific_runtime_libs}"; then
+ echo enable_version_specific_runtime_libs = no >> ${Makefile}
+ else
+ echo enable_version_specific_runtime_libs = ${enable_version_specific_runtime_libs} >> ${Makefile}
+ fi
+
+ # Emit a macro which describes the file containing gcc's
+ # version number.
+ echo gcc_version_trigger = ${gcc_version_trigger} >> ${Makefile}
+ # And emit a macro defining gcc's version number.
+ echo gcc_version = ${gcc_version} >> ${Makefile}
+
+ # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS,
+ # remove any form feeds.
+ if [ -z "${subdirs}" ]; then
+ rm -f ${subdir}/Makefile.tm2
+ sedtemp=sed.$$
+ cat >$sedtemp <<EOF
+s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:
+s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:
+EOF
+ sed -f $sedtemp \
+ ${subdir}/Makefile.tem > ${subdir}/Makefile.tm2
+ rm -f $sedtemp
+ rm -f ${subdir}/Makefile.tem
+ mv ${subdir}/Makefile.tm2 ${subdir}/Makefile.tem
+ fi
+ sed -e "s|^prefix[ ]*=.*$|prefix = ${prefix}|" \
+ -e "s|^exec_prefix[ ]*=.*$|exec_prefix = ${exec_prefix}|" \
+ -e "s|^bindir[ ]*=.*$|bindir = ${bindir}|" \
+ -e "s|^sbindir[ ]*=.*$|sbindir = ${sbindir}|" \
+ -e "s|^libexecdir[ ]*=.*$|libexecdir = ${libexecdir}|" \
+ -e "s|^datadir[ ]*=.*$|datadir = ${datadir}|" \
+ -e "s|^sysconfdir[ ]*=.*$|sysconfdir = ${sysconfdir}|" \
+ -e "s|^sharedstatedir[ ]*=.*$|sharedstatedir = ${sharedstatedir}|" \
+ -e "s|^localstatedir[ ]*=.*$|localstatedir = ${localstatedir}|" \
+ -e "s|^libdir[ ]*=.*$|libdir = ${libdir}|" \
+ -e "s|^includedir[ ]*=.*$|includedir = ${includedir}|" \
+ -e "s|^oldincludedir[ ]*=.*$|oldincludedir = ${oldincludedir}|" \
+ -e "s|^infodir[ ]*=.*$|infodir = ${infodir}|" \
+ -e "s|^mandir[ ]*=.*$|mandir = ${mandir}|" \
+ -e "s|^ALL_BUILD_MODULES =.*|ALL_BUILD_MODULES =${all_build_modules}|" \
+ -e "/^CC[ ]*=/{
+ :loop1
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop1
+ s%^CC[ ]*=.*$%CC = ${CC}%
+ }" \
+ -e "/^CXX[ ]*=/{
+ :loop2
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop2
+ s%^CXX[ ]*=.*$%CXX = ${CXX}%
+ }" \
+ -e "/^CFLAGS[ ]*=/{
+ :loop3
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop3
+ s%^CFLAGS[ ]*=.*$%CFLAGS = ${CFLAGS}%
+ }" \
+ -e "/^CXXFLAGS[ ]*=/{
+ :loop4
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop4
+ s%^CXXFLAGS[ ]*=.*$%CXXFLAGS = ${CXXFLAGS}%
+ }" \
+ -e "s|^SHELL[ ]*=.*$|SHELL = ${config_shell}|" \
+ -e "s|^srcdir[ ]*=.*$|srcdir = ${makesrcdir}|" \
+ -e "s/\f//" \
+ -e "s:^program_prefix[ ]*=.*$:program_prefix = ${program_prefix}:" \
+ -e "s:^program_suffix[ ]*=.*$:program_suffix = ${program_suffix}:" \
+ -e "s:^program_transform_name[ ]*=.*$:program_transform_name = ${program_transform_name}:" \
+ -e "s|^tooldir[ ]*=.*$|tooldir = ${tooldir}|" \
+ -e "s|^build_tooldir[ ]*=.*$|build_tooldir = ${tooldir}|" \
+ -e "s:^DEFAULT_YACC[ ]*=.*$:DEFAULT_YACC = ${DEFAULT_YACC}:" \
+ -e "s:^DEFAULT_LEX[ ]*=.*$:DEFAULT_LEX = ${DEFAULT_LEX}:" \
+ -e "s:^DEFAULT_M4[ ]*=.*$:DEFAULT_M4 = ${DEFAULT_M4}:" \
+ ${subdir}/Makefile.tem >> ${Makefile}
+
+ sed -e "s:^GDB_TK[ ]*=.*$:GDB_TK = ${GDB_TK}:" ${Makefile} >${Makefile}.tem
+ mv -f ${Makefile}.tem ${Makefile}
+
+ # If this is a Canadian Cross, preset the values of many more
+ # tools.
+ if [ "${build}" != "${host}" ]; then
+ for var in ${tools}; do
+ eval val=\$${var}
+ sed -e "/^${var}[ ]*=/{
+ :loop1
+ /\\\\$/ N
+ /\\\\$/ b loop1
+ s/\\\\\\n//g
+ s%^${var}[ ]*=.*$%${var} = ${val}%
+ }" ${Makefile} > ${Makefile}.tem
+ mv -f ${Makefile}.tem ${Makefile}
+ done
+ fi
+
+ # final copy now in ${Makefile}
+
+ else
+ echo "No Makefile.in found in ${srcdir}/${subdir}, unable to configure" 1>&2
+ fi
+
+ rm -f ${subdir}/Makefile.tem
+
+ case "${host_makefile_frag}" in
+ "") using= ;;
+ *) using="and \"${host_makefile_frag}\"" ;;
+ esac
+
+ case "${target_makefile_frag}" in
+ "") ;;
+ *) using="${using} and \"${target_makefile_frag}\"" ;;
+ esac
+
+ case "${site_makefile_frag}" in
+ "") ;;
+ *) using="${using} and \"${site_makefile_frag}\"" ;;
+ esac
+
+ newusing=`echo "${using}" | sed 's/and/using/'`
+ using=${newusing}
+ echo "Created \"${Makefile}\" in" ${PWD=`${PWDCMD-pwd}`} ${using}
+
+ . ${tmpfile}.pos
+
+ # describe the chosen configuration in config.status.
+ # Make that file a shellscript which will reestablish
+ # the same configuration. Used in Makefiles to rebuild
+ # Makefiles.
+
+ case "${norecursion}" in
+ "") arguments="${arguments} --norecursion" ;;
+ *) ;;
+ esac
+
+ if [ ${subdir} = . ] ; then
+ echo "#!/bin/sh
# ${NO_EDIT}
-# ${PWD} was configured as follows:
+# This directory was configured as follows:
${progname}" ${arguments} "
# ${using}" > ${subdir}/config.new
- else
- echo "#!/bin/sh
+ else
+ echo "#!/bin/sh
# ${NO_EDIT}
-# ${PWD}/${subdir} was configured as follows:
+# This directory was configured as follows:
cd ${invsubdir}
${progname}" ${arguments} "
# ${using}" > ${subdir}/config.new
- fi
- chmod a+x ${subdir}/config.new
- mv -f config.back config.status
- ${moveifchange} config.new config.back
- ;;
-
- *) rm -f ${Makefile} ${subdir}/config.status ${links} ;;
+ fi
+ chmod a+x ${subdir}/config.new
+ if [ -r ${subdir}/config.back ] ; then
+ mv -f ${subdir}/config.back ${subdir}/config.status
+ fi
+ ${config_shell} ${moveifchange} ${subdir}/config.new ${subdir}/config.status
+ ;;
+
+ *) rm -f ${Makefile} ${subdir}/config.status ${links} ;;
esac
done
-# If there are subdirectories, then recur.
-if [ -z "${norecursion}" -a -n "${configdirs}" ] ; then
- for configdir in ${configdirs} ; do
- case "${verbose}" in
- "") ;;
- *) echo Configuring ${configdir}... ;;
+# If there are subdirectories, then recur.
+if [ -z "${norecursion}" ] && [ -n "${configdirs}" ] ; then
+ for configdir in ${configdirs} ${extraconfigdirs} ; do
+
+ # If configdir contains ',' it is
+ # srcdir,builddir,target_alias
+ # These come from extraconfigdirs.
+ case ${configdir} in
+ *,*)
+ eval `echo ${configdir} | sed -e 's/\([^,]*\),\([^,]*\),\(.*\)/cfg_dir=\1 bld_dir=\2 tgt_alias=\3/'`
+ ;;
+ *)
+ cfg_dir=${configdir}
+ bld_dir=${configdir}
+ tgt_alias=${target_alias}
+ ;;
esac
- if [ -d ${srcdir}/${configdir} ] ; then
- case "${srcdir}" in
- ".") ;;
- *)
- if [ ! -d ./${configdir} ] ; then
- mkdir ./${configdir}
- fi
- ;;
- esac
-
- POPDIR=${PWD}
- cd ${configdir}
+ if [ -d ${srcdir}/${cfg_dir} ] ; then
+ eval echo Configuring ${configdir}... ${redirect}
+ case "${srcdir}" in
+ ".") ;;
+ *)
+ if [ ! -d ./${bld_dir} ] ; then
+ if mkdir ./${bld_dir} ; then
+ true
+ else
+ echo '***' "${progname}: could not make ${PWD=`${PWDCMD-pwd}`}/${bld_dir}" 1>&2
+ exit 1
+ fi
+ fi
+ ;;
+ esac
+
+ POPDIR=${PWD=`${PWDCMD-pwd}`}
+ cd ${bld_dir}
### figure out what to do with srcdir
- case "${srcdir}" in
- ".") newsrcdir=${srcdir} ;; # no -srcdir option. We're building in place.
- /*) # absolute path
- newsrcdir=${srcdir}/${configdir}
- srcdiroption="-srcdir=${newsrcdir}"
+ case "${srcdir}" in
+ ".") newsrcdir=${srcdir} ;; # no -srcdir option. We're building in place.
+ /* | [A-Za-z]:[\\/]* ) # absolute path
+ newsrcdir=${srcdir}/${cfg_dir}
+ srcdiroption="--srcdir=${newsrcdir}"
+ ;;
+ *) # otherwise relative
+ newsrcdir=../${srcdir}/${cfg_dir}
+ srcdiroption="--srcdir=${newsrcdir}"
+ ;;
+ esac
+
+ # Handle --cache-file=../XXX
+ case "${cache_file}" in
+ "") # empty
;;
- *) # otherwise relative
- newsrcdir=../${srcdir}/${configdir}
- srcdiroption="-srcdir=${newsrcdir}"
+ /* | [A-Za-z]:[\\/]* ) # absolute path
+ cache_file_option="--cache-file=${cache_file}"
+ ;;
+ *) # relative path
+ cache_file_option="--cache-file=../${cache_file}"
;;
esac
### check for guested configure, otherwise fix possibly relative progname
- if [ -f ${newsrcdir}/configure ] ; then
- recprog=${newsrcdir}/configure
+ if [ -f ${newsrcdir}/configure ] ; then
+ recprog=${newsrcdir}/configure
+ elif [ -f ${newsrcdir}/configure.in ] ; then
+ case "${progname}" in
+ /* | [A-Za-z]:[\\/]* ) recprog=${progname} ;;
+ *) recprog=../${progname} ;;
+ esac
else
- case "${progname}" in
- /*) recprog=${progname} ;;
- *) recprog=../${progname} ;;
- esac
- fi
+ eval echo No configuration information in ${cfg_dir} ${redirect}
+ recprog=
+ fi
### The recursion line is here.
- if ${recprog} -s ${host_alias} -target=${target_alias} \
- ${verbose} ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
- ${srcdiroption} ${program_prefixoption} ${site_option} ${removing} ; then
- true
- else
- exit 1
+ if [ ! -z "${recprog}" ] ; then
+ if eval ${config_shell} ${recprog} ${verbose} ${buildopt} --host=${host_alias} --target=${tgt_alias} \
+ ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
+ ${srcdiroption} ${diroptions} ${program_prefixoption} ${program_suffixoption} ${program_transform_nameoption} ${site_option} ${withoptions} ${withoutoptions} ${enableoptions} ${disableoptions} ${floating_pointoption} ${cache_file_option} ${removing} ${other_options} ${redirect} ; then
+ true
+ else
+ echo Configure in `${PWDCMD-pwd}` failed, exiting. 1>&2
+ exit 1
+ fi
fi
- cd ${POPDIR}
- else
- case "${verbose}" in
- "") ;;
- *) echo Warning: source directory \"${srcdir}/${configdir}\" is missing. ;;
- esac
- fi
- done
+ cd ${POPDIR}
+ fi
+ done
fi
-### clean up.
-
-# trap cmd above handles this now:
-#rm -f ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos
+# Perform the same cleanup as the trap handler, minus the "exit 1" of course,
+# and reset the trap handler.
+rm -rf ${tmpdir}
+trap 0
exit 0
projects / binutils.git / blobdiff