topsrcdir=$srcpwd
extra_host_args=
-# Define the trigger file to make sure configure will re-run whenever
-# the gcc version number changes.
-if test "${with_gcc_version_trigger+set}" = set ; then
- gcc_version_trigger="$with_gcc_version_trigger"
- gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
-else
- # If gcc's sources are available, define the trigger file.
- if test -f ${topsrcdir}/gcc/version.c ; then
- gcc_version_trigger=${topsrcdir}/gcc/version.c
- gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
- case "$ac_configure_args" in
- *--with-gcc-version-trigger=$gcc_version_trigger* )
- ;;
- * )
- # Add to all subconfigure arguments: build, host, and target.
- ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
- ;;
- esac
- fi
-fi
### To add a new directory to the tree, first choose whether it is a target
### or a host dependent tool. Then put it into the appropriate list
# know that we are building the simulator.
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
-host_tools="texinfo byacc flex bison binutils gas ld gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
+host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
# Prefix 'build-' so this never conflicts with target_subdir.
build_subdir="build-${build_noncanonical}"
-# Not really a subdirectory, but here for completeness.
-host_subdir=.
+# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
+if ( test $srcdir = . && test -d gcc ) \
+ || test -d $srcdir/../host-${host_noncanonical}; then
+ host_subdir="host-${host_noncanonical}"
+else
+ host_subdir=.
+fi
# No prefix.
target_subdir=${target_noncanonical}
powerpc-*-beos*)
noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
;;
- *-*-darwin*)
- noconfigdirs="$noconfigdirs tk itcl libgui"
- ;;
esac
if test "${ENABLE_LIBADA}" != "yes" ; then
noconfigdirs="$noconfigdirs target-libada"
+ noconfigdirs="$noconfigdirs gnattools"
fi
# Save it here so that, even in case of --enable-libgcj, if the Java
noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
;;
alpha*-*-*vms*)
- noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss build-fixincludes ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
;;
alpha*-*-linux*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
arm-semi-aof )
- noconfigdirs="$noconfigdirs build-fixincludes"
;;
arm-*-coff | strongarm-*-coff | xscale-*-coff)
noconfigdirs="$noconfigdirs ${libgcj}"
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
avr-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 build-fixincludes ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
c4x-*-* | tic4x-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
c54x*-*-* | tic54x-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
;;
- cris-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ cris-*-* | crisv32-*-*)
+ case "${target}" in
+ *-*-elf | *-*-aout)
+ noconfigdirs="$noconfigdirs ${libgcj}";;
+ *)
+ noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
+ esac
;;
crx-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
hppa1.1-*-osf* | hppa1.1-*-bsd* )
- noconfigdirs="$noconfigdirs build-fixincludes"
;;
hppa*64*-*-linux* | parisc*64*-*-linux*)
# In this case, it's because the hppa64-linux target is for
# headers, crt*.o, etc., all of which are needed by these.
noconfigdirs="$noconfigdirs target-zlib"
;;
+ parisc*-*-linux* | hppa*-*-linux*)
+ ;;
hppa*-*-*elf* | \
- parisc*-*-linux* | hppa*-*-linux* | \
hppa*-*-lites* | \
hppa*-*-openbsd* | \
hppa*64*-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
- # Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
;;
i370-*-opened*)
- noconfigdirs="$noconfigdirs build-fixincludes"
;;
i[3456789]86-*-coff | i[3456789]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
i[3456789]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
- noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj} build-fixincludes"
+ noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
# Can't build gdb for mingw32 if not native.
case "${host}" in
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
- noconfigdirs="$noconfigdirs target-gperf target-libgloss build-fixincludes ${libgcj}"
+ noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
# always build newlib if winsup directory is present.
if test -d "$srcdir/winsup"; then
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
i[3456789]86-moss-msdos | i[3456789]86-*-moss* | \
i[3456789]86-*-uwin* | i[3456789]86-*-interix* )
- noconfigdirs="$noconfigdirs build-fixincludes"
;;
i[3456789]86-*-pe)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} build-fixincludes"
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
i[3456789]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
mmix-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss"
+ noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss target-libgfortran"
;;
mn10200-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
powerpc-*-eabi)
- noconfigdirs="$noconfigdirs ${libgcj} build-fixincludes"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
- noconfigdirs="$noconfigdirs build-fixincludes"
;;
rs6000-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
romp-*-*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
;;
- sh-*-*)
+ sh-*-* | sh64-*-*)
case "${host}" in
i[3456789]86-*-vsta) ;; # don't add gprof back in
i[3456789]86-*-go32*) ;; # don't add gprof back in
esac
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- sh64-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
sparc-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
use_gnu_ld=no
fi
;;
+ sparc-*-solaris2.[0-6] | sparc-*-solaris2.[0-6].*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
;;
v810-*-*)
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1795: checking for $ac_word" >&5
+echo "configure:1778: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1825: checking for $ac_word" >&5
+echo "configure:1808: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1876: checking for $ac_word" >&5
+echo "configure:1859: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1908: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1891: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1919 "configure"
+#line 1902 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1924: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1907: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1950: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1933: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1955: checking whether we are using GNU C" >&5
+echo "configure:1938: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1964: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1947: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1983: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1966: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2050: checking for $ac_word" >&5
+echo "configure:2033: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2082: checking for $ac_word" >&5
+echo "configure:2065: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2115: checking whether compiler driver understands Ada" >&5
+echo "configure:2098: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2148: checking how to compare bootstrapped objects" >&5
+echo "configure:2131: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2246: checking for correct version of gmp.h" >&5
+echo "configure:2229: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2248 "configure"
+#line 2231 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2259: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2242: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2272: checking for MPFR" >&5
+echo "configure:2255: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2277 "configure"
+#line 2260 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2285: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2268: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2772: checking for $ac_word" >&5
+echo "configure:2755: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2807: checking for $ac_word" >&5
+echo "configure:2790: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2842: checking for $ac_word" >&5
+echo "configure:2825: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2877: checking for $ac_word" >&5
+echo "configure:2860: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2912: checking for $ac_word" >&5
+echo "configure:2895: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2947: checking for $ac_word" >&5
+echo "configure:2930: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
;;
esac
-# If no --enable-shared nor --disable-shared is specified, we set up
-# LD_LIBRARY_PATH when we build for gcc.
-case $enable_shared in
-"")
- if test -d ${srcdir}/gcc; then
- set_lib_path=yes
- else
- set_lib_path=no
- fi
- ;;
-*)
- set_lib_path=$enable_shared
- ;;
-esac
-
-# If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
-# binutils tools will find libbfd.so.
-case "${set_lib_path}" in
- no) SET_LIB_PATH= ;;
- *) SET_LIB_PATH="\$(REALLY_SET_LIB_PATH)" ;;
-esac
-
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
+ *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac
# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file. Multilibs are neither needed nor
# desired.
-build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${baseargs}"
+build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} --target=${target_alias} ${baseargs}"
# For host modules, accept cache file option, or specification as blank.
case "${cache_file}" in
# Pass the appropriate --host, --build, and --cache-file arguments.
target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
-# provide a proper gxx_include_dir.
-# Note, if you change the default, make sure to fix both here and in
-# the gcc and libstdc++-v3 subdirectories.
-# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
-case "${with_gxx_include_dir}" in
- yes)
- { echo "configure: error: --with-gxx-include-dir=[dir] requires a directory" 1>&2; exit 1; }
- ;;
- no | "")
- case "${enable_version_specific_runtime_libs}" in
- yes) gxx_include_dir='${libsubdir}/include/c++' ;;
- *)
- . ${srcdir}/config.if
- gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
- esac ;;
- *) gxx_include_dir=${with_gxx_include_dir} ;;
-esac
-
FLAGS_FOR_TARGET=
case " $target_configdirs " in
*" newlib "*)
# to it. This is right: we don't want to search that directory
# for binaries, but we want the header files in there, so add
# them explicitly.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include'
# Someone might think of using the pre-installed headers on
# Canadian crosses, in case the installed compiler is not fully
if test "x${use_gnu_ld}" = x &&
echo " ${configdirs} " | grep " ld " > /dev/null ; then
# Arrange for us to find uninstalled linker scripts.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
fi
if test "x${CC_FOR_TARGET+set}" = xset; then
:
elif test -d ${srcdir}/gcc; then
- CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
+ CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
elif test "$host" = "$target"; then
CC_FOR_TARGET='$(CC)'
else
if test "x${GCJ_FOR_TARGET+set}" = xset; then
:
elif test -d ${srcdir}/gcc; then
- GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
+ GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
elif test "$host" = "$target"; then
GCJ_FOR_TARGET='gcj'
else
if test "x${GFORTRAN_FOR_TARGET+set}" = xset; then
:
elif test -d ${srcdir}/gcc; then
- GFORTRAN_FOR_TARGET='$$r/gcc/gfortran -B$$r/gcc/'
+ GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
elif test "$host" = "$target"; then
GFORTRAN_FOR_TARGET='gfortran'
else
# default whereas gcc does not.
# RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
# all other cases.
- CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
- RAW_CXX_FOR_TARGET='$$r/gcc/xgcc -shared-libgcc -B$$r/gcc/ -nostdinc++ '$raw_libstdcxx_flags
+ CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ '$libstdcxx_flags
+ RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ '$raw_libstdcxx_flags
elif test "$host" = "$target"; then
CXX_FOR_TARGET='$(CXX)'
RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
-
-
-
-
-
# Build module lists & subconfigure args.
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3596: checking for $ac_word" >&5
+echo "configure:3535: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3629: checking for $ac_word" >&5
+echo "configure:3568: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3668: checking for $ac_word" >&5
+echo "configure:3607: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3701: checking for $ac_word" >&5
+echo "configure:3640: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3740: checking for $ac_word" >&5
+echo "configure:3679: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3773: checking for $ac_word" >&5
+echo "configure:3712: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3812: checking for $ac_word" >&5
+echo "configure:3751: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3845: checking for $ac_word" >&5
+echo "configure:3784: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3884: checking for $ac_word" >&5
+echo "configure:3823: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3917: checking for $ac_word" >&5
+echo "configure:3856: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3956: checking for $ac_word" >&5
+echo "configure:3895: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3989: checking for $ac_word" >&5
+echo "configure:3928: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4028: checking for $ac_word" >&5
+echo "configure:3967: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4061: checking for $ac_word" >&5
+echo "configure:4000: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4100: checking for $ac_word" >&5
+echo "configure:4039: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4133: checking for $ac_word" >&5
+echo "configure:4072: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4172: checking for $ac_word" >&5
+echo "configure:4111: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4205: checking for $ac_word" >&5
+echo "configure:4144: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4251: checking for $ac_word" >&5
+echo "configure:4190: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4284: checking for $ac_word" >&5
+echo "configure:4223: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4323: checking for $ac_word" >&5
+echo "configure:4262: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4356: checking for $ac_word" >&5
+echo "configure:4295: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4395: checking for $ac_word" >&5
+echo "configure:4334: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4428: checking for $ac_word" >&5
+echo "configure:4367: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4467: checking for $ac_word" >&5
+echo "configure:4406: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4500: checking for $ac_word" >&5
+echo "configure:4439: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4539: checking for $ac_word" >&5
+echo "configure:4478: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4572: checking for $ac_word" >&5
+echo "configure:4511: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4611: checking for $ac_word" >&5
+echo "configure:4550: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4644: checking for $ac_word" >&5
+echo "configure:4583: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4683: checking for $ac_word" >&5
+echo "configure:4622: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4716: checking for $ac_word" >&5
+echo "configure:4655: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4801: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4740: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
# possible, however, we can resort to mv.
echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:4848: checking if symbolic links between directories work" >&5
+echo "configure:4787: checking if symbolic links between directories work" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
&& rm -f confdir.s2; then
gcc_cv_prog_ln_s_dir=yes
else
- gcc_cv_prog_ln_s_dir=yes
+ gcc_cv_prog_ln_s_dir=no
fi
rm -rf confdir.s1 confdir.s2
fi
esac
-# If gcc is built natively with shared library enabled, set
-# $RPATH_ENVVAR to make sure the newly built gcc shared librares are
-# used.
-SET_GCC_LIB_PATH=
-if test -d ${srcdir}/gcc && test x${is_cross_compiler} = xno; then
- case "${set_lib_path}" in
- no) ;;
- *)
- eval "d=\$$RPATH_ENVVAR"
- if test x"$d" != x; then
- d="$pwd/gcc:$d"
- else
- d="$pwd/gcc"
- fi
- SET_GCC_LIB_PATH="\$(RPATH_ENVVAR)=$d; export \$(RPATH_ENVVAR);"
- ;;
- esac
-fi
-
-
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
s%@alphaieee_frag@%%g
/@ospace_frag@/r $ospace_frag
s%@ospace_frag@%%g
-s%@SET_LIB_PATH@%$SET_LIB_PATH%g
s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
s%@BUILD_PREFIX@%$BUILD_PREFIX%g
s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
-s%@gcc_version_trigger@%$gcc_version_trigger%g
-s%@gcc_version@%$gcc_version%g
s%@tooldir@%$tooldir%g
s%@build_tooldir@%$build_tooldir%g
s%@GDB_TK@%$GDB_TK%g
-s%@gxx_include_dir@%$gxx_include_dir%g
-s%@libstdcxx_incdir@%$libstdcxx_incdir%g
s%@build_configargs@%$build_configargs%g
s%@build_configdirs@%$build_configdirs%g
s%@host_configargs@%$host_configargs%g
s%@CREATE_LINK_TO_DIR@%$CREATE_LINK_TO_DIR%g
s%@UNDO_LINK_TO_DIR@%$UNDO_LINK_TO_DIR%g
s%@stage2_werror_flag@%$stage2_werror_flag%g
-s%@SET_GCC_LIB_PATH@%$SET_GCC_LIB_PATH%g
CEOF
EOF
projects / binutils.git / blobdiff