prms send-pr gprof gdbtest tgas etc expect dejagnu sim
m4 autoconf ispell grep diff rcs cvs fileutils shellutils
textutils wdiff find emacs uudecode hello tar gzip indent
- recode release sed utils"
+ recode release sed utils newlib"
# these libraries are built for the target environment, and are built after
#
target_libs="libm xiberty newlib libio libg++"
-## start-sanitize-chill
-target_libs="${target_libs} chill chillrt"
-## end-sanitize-chill
# these tools are built using the target libs, and are intended to run only
# in the target environment. we currently have none.
cross_only="xiberty newlib"
## All tools belong in one of the four categories, and are assigned above
+## We assign ${configdirs} this way to remove all embedded newlines. This
+## is important because configure will choke if they ever get through.
#
-configdirs="${host_libs} ${host_tools} ${target_libs} ${target_tools}"
+configdirs=`echo ${host_libs} ${host_tools} ${target_libs} ${target_tools}`
################################################################################
srctrigger=move-if-change
srcname="gnu development package"
+# This gets set non-empty for some net releases of packages.
+appdirs=""
+
# per-host:
+# Work in distributions that contain no compiler tools, like Autoconf.
+if [ -d ${srcdir}/config ]; then
case "${host}" in
m68k-hp-hpux*) host_makefile_frag=config/mh-hp300 ;;
m68k-apollo-sysv*) host_makefile_frag=config/mh-apollo68 ;;
mips*-sgi-irix5*) host_makefile_frag=config/mh-irix5 ;;
mips*-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;;
mips*-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
+ mips*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
mips*-*-sysv*) host_makefile_frag=config/mh-riscos ;;
+ i[34]86-ncr-sysv43) host_makefile_frag=config/mh-ncrsvr43 ;;
i[34]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
i[34]86-*-sco*) host_makefile_frag=config/mh-sco ;;
i[34]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
i[34]86-*-linux*) host_makefile_frag=config/mh-linux ;;
i[34]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
i[34]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
+ i[34]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
*-ibm-aix*) host_makefile_frag=config/mh-aix ;;
*-bull-bosx*) host_makefile_frag=config/mh-aix ;;
*-sun-*) host_makefile_frag=config/mh-sun ;;
*-hp-hpux*) host_makefile_frag=config/mh-hpux ;;
*-*-hiux*) host_makefile_frag=config/mh-hpux ;;
- rs6000-*-lynxos*) host_makefile_frag=config/mh-lynxosrs6k
- cross_only="xiberty" ;;
- *-*-lynxos*) host_makefile_frag=config/mh-lynxos
- cross_only="xiberty" ;;
+ rs6000-*-lynxos*) host_makefile_frag=config/mh-lynxrs6k ;;
+ *-*-lynxos*) host_makefile_frag=config/mh-lynxos ;;
*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
*-*-sysv*) host_makefile_frag=config/mh-sysv ;;
esac
+fi
# per-target:
+case "${target}" in
+ v810*) target_makefile_frag=config/mt-v810 ;;
+esac
+
gasdir=gas
use_gnu_ld=
use_gnu_as=
yes | "") # the default value for this tree is that X11 is available
;;
no)
- configdirs=`echo ${configdirs} | sed -e 's/tk//;/gash//'`
+ configdirs=`echo " ${configdirs} " | sed -e 's/ tk / /;/ gash / /'`
;;
*)
echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
# toolchains, we add some directories that should only be useful in a
# cross-compiler.
+is_cross_compiler=
+
if [ x"${host}" = x"${target}" ] ; then
# when doing a native toolchain, don't build the targets
# that are in the 'cross only' list
for i in ${cross_only} ; do
- configdirs=`echo ${configdirs} | sed -e "s/$i//"`
+ configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"`
done
+ is_cross_compiler=no
else
# similarly, don't build the targets in the 'native only'
# list when building a cross compiler
for i in ${native_only} ; do
- configdirs=`echo ${configdirs} | sed -e "s/$i//"`
+ configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"`
done
+ is_cross_compiler=yes
fi
+# Configure extra directories which are host specific
+
+case "${host}" in
+ i[34]86-*-go32*)
+ configdirs="$configdirs dosrel" ;;
+esac
+
# Remove more programs from consideration, based on the host or
# target this usually means that a port of the program doesn't
# exist yet.
;;
esac
+
+
+
+
case "${target}" in
alpha-dec-osf1*)
- noconfigdirs="$noconfigdirs emacs fileutils grep gas libg++ libio newlib"
+ noconfigdirs="$noconfigdirs emacs fileutils grep newlib"
;;
alpha*-*-*)
- noconfigdirs="$noconfigdirs gas libg++ libio newlib"
+ noconfigdirs="$noconfigdirs newlib"
;;
h8300*-*-* | \
h8500-*-*)
noconfigdirs="$noconfigdirs libg++ libio"
-## start-sanitize-chill
- noconfigdirs="$noconfigdirs chillrt"
-## end-sanitize-chill
;;
- hppa*-*-osf)
+ hppa*-*-*elf*)
# Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
"" | cc*) noconfigdirs="$noconfigdirs emacs" ;;
*) ;;
esac
- noconfigdirs="$noconfigdirs ld binutils shellutils"
+ noconfigdirs="$noconfigdirs ld shellutils"
;;
i[34]86-*-go32)
# add the go32 support tools to the list
+ # but don't build gdb
configdirs=`echo go32 ${configdirs}`
+ noconfigdirs="$noconfigdirs gdb libg++ libio"
+ ;;
+ i[34]86-*-sco*)
+ noconfigdirs="$noconfigdirs gprof"
;;
i[34]86-*-solaris2*)
# The linker does static linking correctly, but the Solaris C library
esac
# but that's okay since emacs doesn't work anyway
noconfigdirs="$noconfigdirs emacs"
-
- # static versions of several key libraries are not available,
- # so building our entire toolchain is impossible until
- # the GNU linker supports shared libraries
- noconfigdirs="$noconfigdirs ld"
;;
- rs6000-*-*)
+ powerpc-*-aix*)
+ # copied from rs6000-*-* entry
+ noconfigdirs="$noconfigdirs ld binutils gprof textutils cvs"
+ ;;
+ rs6000-*-lynxos*)
# a gcc built textutils will cause the linker to hang on 'join'
# The CVS server code doesn't work on the RS/6000
- noconfigdirs="$noconfigdirs ld binutils gprof textutils cvs"
+ # Newlib makes problems for libg++ in crosses.
+ noconfigdirs="$noconfigdirs gas ld newlib gprof textutils cvs"
+ use_gnu_ld=no
+ use_gnu_as=no
+ ;;
+ rs6000-*-*)
+ # a gcc built textutils will cause the linker to hang on 'join'
+ noconfigdirs="$noconfigdirs ld binutils gprof textutils"
;;
m68k-apollo-*)
noconfigdirs="$noconfigdirs ld binutils gprof"
# The GNU linker does not support shared libraries.
noconfigdirs="$noconfigdirs ld gprof"
;;
+ mips*-dec-bsd*)
+ noconfigdirs="$noconfigdirs gprof"
+ ;;
+ mips*-*-bsd*)
+ noconfigdirs="$noconfigdirs gprof ld"
+ ;;
mips*-*-*)
noconfigdirs="$noconfigdirs gprof"
;;
+ romp-*-*)
+ noconfigdirs="bfd binutils ld gas opcodes"
+ ;;
sh-*-*)
case "${host}" in
i[34]86-*-vsta) ;; # don't add gprof back in
esac
;;
sparc-*-sunos4*)
- use_gnu_ld=no
- ;;
- sparc-*-solaris2*)
- # See i386-*-solaris2* above.
- noconfigdirs="$noconfigdirs ld"
- ;;
- i[34]86-*-sco*)
- noconfigdirs="$noconfigdirs gprof"
+ if [ x${is_cross_compiler} != xno ] ; then
+ noconfigdirs="$noconfigdirs gdb gdbtest newlib sim dejagnu expect tcl"
+ else
+ use_gnu_ld=no
+ fi
;;
- *-*-sysv4)
- use_gnu_ld=no
+ vax-*-vms)
+ noconfigdirs="$noconfigdirs bfd binutils gdb ld newlib opcodes"
;;
- *-*-vms)
- noconfigdirs="$noconfigdirs bfd ld binutils gdb"
+ vax-*-*)
+ noconfigdirs="$noconfigdirs newlib"
;;
+ *-*-lynxos*)
+ # Newlib makes problems for libg++ in crosses.
+ noconfigdirs="$noconfigdirs newlib"
+ ;;
esac
notsupp=""
for dir in . $noconfigdirs ; do
if [ $dir != . ] && echo "# ${configdirs} #" | grep "${dir} " >/dev/null 2>&1 ; then
- configdirs=`echo $configdirs | sed -e "s/${dir} / /"`
+ configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
if [ -r $srcdir/$dir/configure ] || [ -r $srcdir/$dir/configure.in ]; then
notsupp="$notsupp $dir"
fi
# supported by the one or two programs in a package.
if [ -n "${notsupp}" ] && [ -z "${norecursion}" ]; then
+ # If $appdirs is non-empty, at least one of those directories must still
+ # be configured, or we error out. (E.g., if the gas release supports a
+ # specified target in some subdirs but not the gas subdir, we shouldn't
+ # pretend that all is well.)
+ if [ -n "$appdirs" ]; then
+ for dir in $appdirs ; do
+ if [ -r $dir/Makefile.in ] && echo "# ${configdirs} #" | grep "${dir} " >/dev/null 2>&1 ; then
+ appdirs=""
+ break
+ fi
+ done
+ if [ -n "$appdirs" ]; then
+ echo "*** This configuration is not supported by this package." 1>&2
+ exit 1
+ fi
+ fi
+ # Okay, some application will build, or we don't care to check. Still
+ # notify of subdirs not getting built.
echo "*** This configuration is not supported in the following subdirectories:" 1>&2
echo " ${notsupp}" 1>&2
echo " (Any other directories should still work fine.)" 1>&2
projects / binutils.git / blobdiff