+Contents
+--------
- gdb bug list
+If you find inaccuracies in this list, please send mail to
-This bug list is probably not up to date or accurate, but it reflects
-some known bugs in gdb, if you are into bug-hunting.
+* Things to do for Mach.
+* General to do list.
+Things to do for Mach
+---------------------
+
+Note: If mach_port_t is undefined, you have mach2 headers instead of
+mach3 headers. Get the mach3 headers or typedef it to unsigned int.
+
+0. Get it to compile and run again, especially for non-threaded
+programs (some of the following are sub-tasks for this).
+
+1. attach_command still contains a call to wait_for_inferior which is
+wrong for Mach. Need to figure out a way to push this functionality
+into target_attach (perhaps by having target_attach, for non-Mach
+targets, call a function which does what is now in attach_command).
+
+2. jtv's port contains an #ifdef which skips the call to
+insert_step_breakpoint right after SOLIB_CREATE_INFERIOR_HOOK, but
+goes ahead and calls insert_breakpoints. I don't understand this--the
+comment would appear to apply to all breakpoints. Perhaps it is an
+artifact from a previous version of the Mach port? (BTW, the modern
+equivalent is the call to proceed from m3_create_inferior; proceed
+inserts breakpoints).
+
+3. Get the thread stuff to use the new generic thread code (enhancing
+the generic thread code to include any missing features). This is
+necessary to make thread-specific breakpoints work again. If someone
+wants to try to patch up the old Mach threads code, need to deal with
+the hooks for PREPARE_TO_PROCEED and ATTACH_TO_THREAD, which I haven't
+merged--can these go in target_resume()?
+
+4. BFD problem--"Undefined symbol _aout_32_swap_exec_header_in".
+Believed to be fixed (fix not yet tested with GDB).
+
+5. The linker complains about mfree and so on being multiply defined.
+Believed to be fixed (fix not yet tested).
+
+6. i386_mach3_float_info and register_addr were undefined in the
+link. I haven't investigated, but probably just another easy
+configuration thing or something. (possibly already fixed).
+
+7. Implement the features which CMU gdb has which the main GDB does
+not. This could be done by getting paperwork from CMU and merging
+their changes, or by reimplementing them.
+
+General To Do List
+------------------
+
+This to do list is probably not up to date, and opinions may vary
+about the importance or even desirability of some of the items.
It should be possible to use symbols from shared libraries before we know
exactly where the libraries will be loaded. E.g. "b perror" before running
one(s) there should be removed when we have to step over one. Support
breakpoints that don't have to be removed to step over them.
-Speed up watchpoints by not single-stepping them, but do something
-faster like single-line execution. Speed them up tremendously on
-machines that have watchpoint registers.
+Speed up watchpoints by using debug registers, page table diddling (on
+SunOS4, can call mprotect() in the inferior; on other machines can do
+something simpler), etc. Note that you need to detect a
+"fast-watchable expression" (i.e., if watching "*p", then either a
+change to the address pointed to by p or a change to p itself which
+causes the value of *p to change, is a watchpoint hit). It is
+possible we will also someday want extensions which are
+lower-level--"read from these addresses", "write to these addresses",
+etc., but there is no consensus about just how important these are and
+exactly what form they would take. There is a consensus that the
+existing watchpoint semantics should use hardware assists when
+available.
Update gdbint.texinfo to include doc on the directory structure and
the various tricks of building gdb.
The prompt at end of screen should accept space as well as CR.
-"List" should put you into a pseudo-"more" where you can hit space
-to get more, forever to eof.
+"List" should put you into a pseudo-"more" where you can hit space to
+get more, forever to eof. (questionable--you can already hit return
+to get more, and modal user interfaces are evil -kingdon, 28 Oct
+1993).
Check STORE_RETURN_VALUE on all architectures. Check near it in tm-sparc.h
for other bogosities.
vtblprint of a vtbl should demangle the names it's printing.
-Backtrace should point out what the currently selected frame is, in its
-display, perhaps showing "@3 foo (bar, ...)" rather than "#3 foo (bar, ...)".
+Backtrace should point out what the currently selected frame is, in
+its display, perhaps showing "@3 foo (bar, ...)" or ">3 foo (bar,
+...)" rather than "#3 foo (bar, ...)".
"i program" should work for core files, and display more info, like what
actually caused it to die.
-Hitting ^Z to an inferior doesn't work right, it takes several continues
-to make it actually go.
-
"x/10i" should shorten the long name, if any, on subsequent lines.
Check through the code for FIXME comments and fix them. dbxread.c,
There should be a way for "set" commands to validate the new setting
before it takes effect.
-The "display" command should become the "always" command, e.g.
- "always print XXX"
- "always p/xxx XXX"
- "always echo foo"
- "always call XXX"
- "always x/i $pc", etc.
-
A mess of floating point opcodes are missing from sparc-opcode.h.
Also, a little program should test the table for bits that are
overspecified or underspecified. E.g. if the must-be-ones bits
"ena d" is ambiguous, why? "ena delete" seems to think it is a command!
-Line numbers are off in some spots. In proceed() at 1st "oneproc = 1",
-it seems to run that statement, but it doesn't actually.
-
Perhaps move the tdep, xdep, and nat files, into the config
subdirectories. If not, at least straighten out their names so that
they all start with the machine name.
i line VAR produces "Line number not known for symbol ``var''.". I
thought we were stashing that info now!
-Make sure we can handle executables with no symbol info, e.g. /bin/csh.
-
We should be able to write to random files at hex offsets like adb.
Make "target xxx" command interruptible.
examined, you get "Couldn't read float regs from core file"...if
indeed it can't. generic_mourn_inferior...
-Check signal argument to remote proceed's and error if set.
+Have remote targets give a warning on a signal argument to
+target_resume. Or better yet, extend the protocols so that it works
+like it does on the Unix-like systems.
Sort help and info output.
probably guessed wrong, or left them "for later" when I have a
machine that can attempt to build them.
-Use the complain() mechanism for handling all the error() calls in dbxread.c,
-and in similar situations in coffread.c and mipsread.c.
-
When doing "step" or "next", if a few lines of source are skipped between
the previous line and the current one, print those lines, not just the
last line of a multiline statement.
call printf ("%x\n", malloc) ==> wierd value, should be same as
call printf ("%x\n", &malloc) ==> correct value
-Fix dbxread.c symbol reading in the presence of interrupts. It currently
-leaves a cleanup to blow away the entire symbol table when a QUIT occurs.
+Fix dbxread.c symbol reading in the presence of interrupts. It
+currently leaves a cleanup to blow away the entire symbol table when a
+QUIT occurs. (What's wrong with that? -kingdon, 28 Oct 1993).
Mipsread.c reads include files depth-first, because the dependencies
in the psymtabs are way too inclusive (it seems to me). Figure out what
files, the way it happens for dbxread.c and coffread.c, for VxWorks
incremental symbol table reloading.
-When attached to a non-child process, ^C or other signals are not
-propagated to the child. Do this in the GDB signal handler, using
-target_kill(). AMD version: ^C should do ^Ak to stop ebmon.
+Get all the remote systems (where the protocol allows it) to be able to
+stop the remote system when the GDB user types ^C (like remote.c
+does). For ebmon, use ^Ak.
+Possible feature: A version of the "disassemble" command which shows
+both source and assembly code ("set symbol-filename on" is a partial
+solution).
projects / binutils.git / blobdiff