-1998-04-30 Paul Eggert <eggert@twinsun.com>
+1999-09-04 Steve Chamberlain <sac@pobox.com>
- * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end;
- Solaris `make' causes it to continue to next definition.
+ * config.sub: Add support for configuring for pj.
+
+
+ * config.sub (maybe_os): Add support for configuring for fr30.
+
+
+ * configure.in: Do not configure or build ld for AIX
+ platforms. ld is known to be broken on these platforms.
+
+
+ * Makefile.in (LDFLAGS): Define.
+
+
+ * configure.in (i[3456]-*-mingw32*): Don't put gprof in
+ noconfigdirs.
+ (*-*-cygwin*): Likewise.
+
+
+ * mkdep: New file.
+ * Makefile.in (GAS_SUPPORT_DIRS): Add mkdep.
+ (BINUTILS_SUPPORT_DIRS): Add mkdep.
+
+ * configure (tmpfile): Change cONf$$ to cNf$$ to avoid an overly
+ long file name when using DJGPP on MS-DOS.
+
+
+ * Makefile.in (check-target-libio): Remove all-target-libstdc++
+ dependency as this causes "make check" to globally "make all"
+
+
+ * Makefile.in (binutils.tar.bz2): Don't pass makeall.bat and
+ configure.bat in SUPPORT_FILES.
+ (gas+binutils.tar.bz2): Likewise.
+
+ * makeall.bat: Remove; obsolete.
+
+
+ From Mark Elbrecht:
+ * configure.bat: Remove; obsolete.
+
+
+ * configure: Add -W -Wall to the default CFLAGS when compiling with
+ gcc.
+
+
+ * configure.in: Build ld, binutils & gas for hppa*-*-linux-gnu*.
+
+
+ * configure.in: Build ld on IRIX6.
+
+
+ * Makefile.in: Change distribution targets to use bzip2 instead of
+ gzip.
+ (TEXINFO_SUPPORT): Set to just texinfo/texinfo.tex.
+ (taz): Don't use texinfo/gpl.texinfo or texinfo/lgpl.texinfo.
+
+
+ * config.sub: Add mcore target.
+
+
+ * config.guess (ppc-*-linux-gnu): Also use ld emul elf32ppclinux.
+
+
+ * config.sub: Updated to match latest EGCS version.
+
+
+ * ltmain.sh: [mode link] Always use CC given by ltconfig.
+
+
+ * ltconfig, ltmain.sh: Update to libtool 1.2f.
+
+
+ * configure.in (noconfigdirs): Don't build libstub for arm-elf targets.
+ (noconfigdirs): Don't build any bsp stuff for for arm-oabi targets.
+ Bad merge removed these two changes.
+
+
+ * configure.in (i?86-*-beos*): Do config gperf; don't config
+ gdb, newlib, or libgloss.
+
+
+ * config.sub: Add support for mcore targets.
+
+
+ * configure.in (d30v-*): Use config/mt-d30v as makefile fragment,
+ not mt-ospace, in order to shut up assembler warning about using
+ symbols that are named the same as registers.
+
+
+ * Makefile.in (all-target-cygmon): Added all-target-bsp to the
+ dependency list for all-target-cygmon.
+
+
+ * config-ml.in: Check $host, not $target, for selective multilibs.
+ (arm-*-*): Allow disabling of biendian, h/w fp, 26 bit apcs,
+ thumb interworking, and underscore prefix multilibs.
+
+
+ * missing: Update to version from current automake.
+
+
+ * configure (gxx_include_dir): Removed.
+
+ * configure.in (gxx_include_dir): Handle it.
+ * Makefile.in: Likewise.
+
+
+ * config.sub (mips64vr4111,mips64vr4111el) Add.
+
+
+ * config.guess: Correct typo for detecting ELF on FreeBSD.
+
+
+ * config/mh-go32: Delete.
+ * config/mh-djgpp: New. Renamed from mh-go32.
+ * configure.in (pc-msdosdjgpp): Set host_makefile_frag to
+ config/mh-djgpp.
+
+
+ * Makefile.in (all-target-bsp): Added all-gcc all-binutils and
+ all-target-newlib to dependency list for all-target-bsp.
+
+
+ * config.sub: Add i386-uwin support.
+ * config.guess: Likewise.
+
+
+ * configure.in: cleanup, add mh-*pic handling for arm, special
+ case powerpc*-*-aix*
+
+
+ * configure.in (noconfigdirs): Removed target-libgloss so libnosys.a
+ can be built.
+
+
+ * configure.in: Added bsp support to arm-*-coff and arm-*-elf
+ targets.
+
+
+ * config.sub: Rename CYGNUS LOCAL to EGCS LOCAL
+
+
+ * config.sub: Check for "cygwin*" rather than "cygwin32*"
+
+
+ * config.sub: Fix typo in arm recognition.
+
+
+ * configure.in (noconfigdirs): Changed target_configdirs to
+ include target-bsp only for m68k-*-elf* and m68k-*-coff*
+ rather than m68k-*-* since it is not known to work on
+ m68k-aout. Ditto for arm-*-*oabi.
+
+
+ * configure.in (*-*-windows*): Remove, no longer used.
+ * config/mh-windows: Ditto.
+
+
+ * config.guess: Automatically recognise ELF on FreeBSD. From Niall
+ Smart and improved by Andrew Cagney.
+
+
+ * config.guess: Recognize openbsd-*-hppa.
+
+
+ * Makefile.in (REALLY_SET_LIB_PATH): Append $$$(RPATH_ENVVAR)
+ only if it is not empty.
+
+
+
+ * config.guess: Modified to recognize uname's armv* syntax.
+
+ * config.sub: Modified to recognize uname's armv* syntax.
+
+
+ * configure.in: Added target-bsp for sparclite.
+
+
+ * config.sub: Recognize alphapca5[67] and up to alphaev8.
+
+
+ * configure.in: Add support for strongarm port.
+ * config.sub: Add support for strongarm target.
+
+
+ * configure.in (*-*-cygwin32*): Use config/mh-cygwin instead of
+ the old name config/mh-cygwin32.
+ Enable texinfo.
+
+
+ * configure.in: Do build ld for ix86 Solaris.
+
+
+ * Makefile.in (EXTRA_GCC_FLAGS): Set AR to $AR instead of
+ $AR_FOR_TARGET. Likewise for RANLIB.
+
+
+ * config.sub (oabi): Recognize.
+ * configure.in (arm-*-oabi): Handle.
+
+
+ * config.guess: Improve detection of i686 on UnixWare 7.
+
+
+ * config.guess: Add support for i386-pc-interix.
+ * config.sub: Likewise.
+ * configure.in: Likewise.
+ * config/mh-interix: New file.
+
+
+ * Makefile.in: Remove unneeded all-target-libio from
+ from all-target-winsup target since it is now unneeded.
+ Add all-target-libtermcap in its place since it is now
+ needed.
+
+
+ * configure.in: makefile stub for cygwin target is probably
+ unnecessary. Remove it for now.
+ * config/mt-cygwin: Remove.
+
+
+ * configure.in: libtermcap.a should be built when cygwin is the
+ target as well as the host.
+ * config.guess: Allow mixed case in cygwin uname output.
+ * Makefile.in: Add libtermcap target.
+ * config/mt-cygwin: New file. libtermcap target info.
+
+
+ * configure.in: Add cygmon for x86-coff and x86-elf. Configure
+ cygmon for all sparclite targets, regardless of object format.
+
+
+ * configure.in: Added target-bsp for several target architectures.
+
+ * Makefile.in: Added rules for bsp.
+
+
+ * config.sub: Clean up handling of hppa2.0.
+
+
+ * config.guess: Use C code to identify more HP machines.
+
+
+ * config.sub: Handle hppa2.0.
+
+
+ * config.guess: Improve detection of hppa2.0 processors.
+
+
+ * config.guess: Recognize FreeBSD using ELF automatically.
+
+
+ * configure (skip-this-dir): Add handling for new shell script, which
+ might be created by a sub-directory's configure to indicate, this particular
+ directory is "unwanted".
+ * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Likewise.
+
+
+
+ * ltconfig: import from libtool, after changing libtool to
+ account for the cygwin name change.
+
+
+ * Makefile.in: CC_FOR_TARGET and CXX_FOR_TARGET should also
+ include newlib/libc/sys/cygwin and newlib/libc/sys/cygwin32.
+
+
+ * configure.in: Add libtermcap to list of cygwin dependencies.
+
+
+ * Makefile.in: modify CC_FOR_TARGET and CXX_FOR_TARGET so that
+ they include winsup/include when it's a cygwin target.
+
+
+ * configure.in (host_tools): Added zip.
+ * Makefile.in (all-target-libjava): Depend on all-zip.
+ (all-zip): New target.
+ (ALL_MODULES): Added all-zip.
+ (NATIVE_CHECK_MODULES): Added check-zip.
+ (INSTALL_MODULES): Added install-zip.
+ (CLEAN_MODULES): Added clean-zip.
+
+
+ * Makefile.in: lose "32" from comment about cygwin.
+
+
+ * configure.in: Use -Os to build target libraries for the fr30.
+
+
+ * config.sub: Add fr30.
+
+
+ * configure.in: drop "32" from config/mh-cygwin32. Check
+ cygwin* instead of cygwin32*.
+ * config.sub: Check cygwin* instead of cygwin32*.
+
+
+ * Makefile.in configure.in: Add the ability to use tcl8.1 and tk8.1
+ if desired.
+
+
+ * config.if (cxx_interface, libstdcxx_interface): Do not try to set
+ these if the appropriate directories and files to not exist.
+
+
+ * Makefile.in (DEVO_SUPPORT): Add config.if.
+
+
+ * config.sub: Bring back lost sparcv9.
+
+
+ * config.sub: Add support for i[34567]86-pc-udk.
+ * configure.in: Likewise.
+
+
+ * Makefile.in: add bzip2 package building bits for user
+ tools module
+ * configure.in: ditto
+
+
+ * configure.in (target_subdir): Remove duplicate line.
+
+
+ * Makefile.in (all-automake): fix dependencies.
+
+
+ * configure.in: Minor cleanups for building in the $(target_alias)
+ subdir.
+
+
+ * Makefile.in (bootstrap): Set r and s before make all. Use
+ BASE_FLAGS_TO_PASS in make all.
+ (cross): Likewise.
+
+
+ * Makefile.in (bootstrap): Pass TARGET_FLAGS_TO_PASS to `make all'.
+
+
+
+ * config.sub: Fix typo in last change.
+
+
+ * config.sub: Add support for C4x target.
+ * configure.in: Likewise.
+
+
+ * config.sub: Recognize sparcv9 just like sparc64.
+
+
+ * config.guess: Match "Pent II" or "PentII" for OpenServer.
+
+
+ * config.guess: Correctly identify Pentium II sco boxes.
+
+ * config.guess: Fix "tr" code. From Weiwen Liu.
+
+
+ * configure.in: Do not assume x86-svr4 or x86-unixware can handle
+ stabs.
+
+
+ * Makefile.in (TARGET_CONFIGDIRS): Add libchill.
+ (ALL_TARGET_MODULES): Add all-target-libchill.
+ (CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES): Similarly.
+ (INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES): Similarly.
+ (all-target-libchill): Add dependencies.
+ * configure.in (target_libs): Add libchill.
+
+
+ * config.guess: Avoid assumptions about "tr" behaves when
+ LANG is set to something other than English.
+
+
+ * configure (gxx_include_dir): Changed to
+ '${prefix}/include/g++'-${libstdcxx_interface}.
+
+ * config.if: New to determine the interfaces.
+
+
+ * config.guess: Detect and handle MPE/IX.
+ * config.sub: Deal with MPE/IX.
+
+
+ * configure.in: Use mh-aix43.
+
+
+ * configure: Fix --without/--disable cases for gxx-include-dir.
+
+
+ * mdata-sh: Imported. Needed for automake support.
+
-start-sanitize-java
+ * Makefile.in (taz): Try "chmod -R og=u ." before
+ "chmod og=u `find . -print`".
- * Makefile.in: Added dependencies to all-target-boehm-gc and
- all-target-libjava to have them configure during the build.
-end-sanitize-java
-start-sanitize-gdbtk
+ * configure.in: Add arm-elf and thumb-elf support.
- * Makefile.in (install-gdbtk): Call this 'install-gdb' so that
- the right GUI libraries and files are installed along with GDB.
+
+ * Makefile.in: Undo previous patch.
+
+
+ * Makefile.in (INSTALL_TARGET): Move EXTRA_TARGET_HOST_INSTALL_MODULES
+ to here ...
+ (install-no-fixedincludes): and here
+ (INSTALL_MODULES): ... from here.
+
+
+ * config.sub: Merge with FSF.
+
+ * config.guess: Merge with FSF.
+
+
+ * configure (extraconfigdirs): New variable.
+ (SUBDIRS): Add extraconfigdirs and recurse on them too.
+ * Makefile.in (all): Move higher in file.
+ (EXTRA_TARGET_HOST_ALL_MODULES): New variable.
+ (EXTRA_TARGET_HOST_{INSTALL,CHECK}_MODULES): New variables.
+ (ALL_MODULES): Add EXTRA_TARGET_HOST_ALL_MODULES.
+ (CROSS_CHECK_MODULES): Add EXTRA_TARGET_HOST_CHECK_MODULES.
+ (INSTALL_MODULES): Add EXTRA_TARGET_HOST_INSTALL_MODULES.
+
+
+ * Makefile.in (all-target-libjava): Depend on all-gcc and
+ all-target-newlib.
+ (configure-target-libjava): Depend on $(ALL_GCC).
+
+
+ * config.guess: (*-pc-sco3.2v5) Add detection for Pentium II.
+ (*-pc-unixware7) Add detection for Pentium II, Pentium Pro.
+
+
+ * ylwrap: Change absolute path checks to check for DOS style path
+ names.
+
+ * ylwrap: Don't use a full path name if the source file is in the
+
+ * config-ml.in: Default to being verbose, to match Feb 18 change to
+ configure.
+
+
+ Brought over from egcs:
+
+
+ * configure.in (target_subdir): Set to ${target_alias} instead
+ of "libraries".
+
+
+ * configure.in (target_subdir): Set to libraries if enable_multilib.
+
+
+ * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there are any
+ multilibs, force reconfiguration the first time we create
+ multilib.out in a subdirectory, in case TARGET_SUBDIR is `.'.
+
+
+ * configure.in: Strip any --no option from CONFIG_ARGUMENTS, to
+ avoid confusion with --no-recursion.
+
+
+ * configure.in: Win32 hosts shouldn't use install -x
+ * install-sh: remove -x option, and special .exe-handling
+ hack.
+
+
+ * config.guess: Recognize i586-pc-beos.
+ * configure.in: Don't build some bits for beos.
+
+
+ * configure: If CC is set but CFLAGS is not, and CC is gcc, make
+ CFLAGS default to -O2.
+
+ * ltmain.sh: Add some hacks to make SunOS --enable-shared work
+ when using GNU ld.
+
+
+ * ltmain.sh: Correct install when using a different shell.
+
+
+ * ltconfig, ltmain.sh: Update to libtool 1.2b.
+
+
+ * makefile.vms: Update to build binutils/makefile.vms. Add install
+ target.
+
+
+ * ltconfig: Update to correct AIX handling.
+
+
+ * Makefile.in (BASE_FLAGS_TO_PASS): Add TARGET_SUBDIR.
+
+ * configure.in (target_subdir): Set to ${target_alias} instead
+ of "libraries".
+
+
+ * Makefile.in (BASE_FLAGS_TO_PASS): Add gcc_version_trigger.
+ (Makefile): Depend on $(gcc_version_trigger).
+
+ * configure (gcc_version): Change default initializer to empty
+ string.
+ (gcc_version_trigger): New variable; pass this variable down
+ to subdir configures to enable them checking gcc's version
+ themselves. Emit make macros for both gcc_version vars.
+ (topsrcdir): Initialize reliably.
+ (recursion line): Remove --with-gcc-version=${gcc_version}.
+
+
+ * configure (enable_version_specific_runtime_libs): Implement new flag
+ --enable-version-specific-runtime-libs which installs C++ runtime stuff
+ in $(libsubdir); emit definition in each generated Makefile.
+ (gxx_include_dir): Initialize depending on
+ $enable_version_specific_runtime_libs.
+
+
+ * configure (gcc_version): Initialize properly depending on
+ how and where configure is started.
+ (recursion line): Pass a --with-gcc-version=${gcc_version}
+ to configures in subdirs.
+
+
+ * configure.in (noconfigdirs): Add configure pattern for mips tx39
+ cygmon
+
+
+ * configure.in: Add cygmon and libstub support for mn10200.
+
+
+ * configure (gcc_version): Add new variable describing the
+ particular gcc version we're building.
+ * Makefile.in (libsubdir): Add new macro for the directory
+ in which the compiler finds executables, libraries, etc.
+ (BASE_FLAGS_TO_PASS): Pass down gcc_version, target_alias
+ and libsubdir.
+
+
+ * Makefile.in (local-clean): remove *.log
+ (warning.log): built with warn_summary from build.log
+ (mail-report.log): run test_summary
+ (mail-report-with-warnings.log): run test_summary including
+ warning.log in the report
+
+
+ * config.guess: Detection of Pentium II for *-sco-3.2v5*.
+
+
+ * Makefile.in (grep): Grep no longer depends on libiberty.
+
+
+ * Makefile.in: all-snavigator needs all-libgui.
+
+
+ * configure.in: Add cygmon and libstub support for mn10300.
+
+
+ * missing: Update to version from automake 1.3.
+
+ * ltmain.sh: On installation, don't get confused if the same name
+ appears more than once in the list of library names.
+
+
+ * config.sub: Accept m68060 and m5200 as CPU names.
+
+
+ * configure: Use && rather than using -a in test, because odd
+ strings can confuse test.
+ * configure.in: Likewise.
+
+
+ * ltconfig, ltmain.sh: Bring in Visual C++ support.
+
+
+ * Makefile.in (boostrap2-lean, bootstrap3-lean,
+ bootstrap4-lean): new targets
+
+
+ * COPYING.LIB: Update FSF address.
+
+
+ * ltconfig, ltmain.sh: Update to libtool 1.2a.
+
+ * Makefile.in (GASB_SUPPORT_DIRS): Remove intl; already included via
+ GAS_SUPPORT_DIRS.
+
+
+ * ltconfig, ltmain.sh: Avoid producing a version number if
+ -version-info was not used.
+
+
+ * configure.in: Add --with-newlib to CONFIG_ARGUMENTS if we are
+ building with newlib.
+
+
+ * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end;
+ Solaris `make' causes it to continue to next definition.
-end-sanitize-gdbtk
* configure.in: Change alpha to alpha* in several places.
* config.sub: Recognize sparc86x.
+
+ * configure.in (--enable-target-optspace): Remove debug echo.
+
* configure: Set CXXFLAGS from CXXFLAGS, not CFLAGS.
-start-sanitize-cygnus
-
- * Makefile.in: Added standard targets for `flexlm'.
- Added intermodule dependency for `all-snavigator'.
-
- * configure.in: Include `flexlm' as a host library.
-
-end-sanitize-cygnus
* ltconfig: Update cygwin32 support.
use -Os to compile target libraries rather than -O2. Default to
using -Os for d10v and m32r if --{enable,disable}-target-optspace is
not used.
-start-sanitize-d30v
* configure.in (target_cflags): Ditto for d30v.
-end-sanitize-d30v
(all-gprof): Likewise.
(all-ld): Likewise.
-
- * Makefile.in (ALL_TARGET_MODULES): Added libjava, boehm-gc.
- (CONFIGURE_TARGET_MODULES): Likewise.
- (CHECK_TARGET_MODULES): Likewise.
- (INSTALL_TARGET_MODULES): Likewise.
- (CLEAN_TARGET_MODULES): Likewise.
- (all-target-libjava): New target.
- (all-target-boehm-gc): Likewise.
- * configure.in (target_libs): Added libjava, boehm-gc.
- * configure.in: Recognise i[3456]96-*-sysv5* as a valid host, and
- use mh-sysv5 if specified. Support gprof on SCO Open Server.
+ * configure.in: Recognise i[3456]96-*-sysv5* as a valid host, and
+ use mh-sysv5 if specified. Support gprof on SCO Open Server.
+
+
+ * configure: Define DEFAULT_M4 by searching PATH.
+ * Makfile.in: Use DEFAULT_M4.
* Makefile.in: add ash make rules
* configure.in: add ash to native_only and host_tools lists
-start-sanitize-ide
-
- * Makefile.in: Add libidetcl, like libide.
- (all-libide): Remove dependencies on all-tcl, all-tk, all-itcl,
- all-ilu.
- * configure.IN: Add libidetcl, like libide.
- * configure (GDB_TK): If enable_ide, add all-libidetcl.
-
-end-sanitize-ide
* Makefile.in (all-gettext, all-intl): New targets.
(noconfigdirs) [various cases]: Likewise.
(host_libs): Added intl.
-start-sanitize-gdbtk
-
- * configure: Do not disable building gdbtk for cygwin32 hosts.
-
-end-sanitize-gdbtk
* Makefile.in: Revert yesterday's change.
* ltconfig, ltmain.sh: Update to libtool 1.2.
+
+ * Makefile.in (install-gcc): Don't specify LANGUAGES here.
+ (install-gcc-cross): Instead, override LANGUAGES here.
+
+
+ * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Set CONFIG_SITE to a
+ non-existent file since /dev/null loses with bash 2.0/autoconf 2.12.
+
* configure.in: Add Thumb-pe target.
* Makefile.in - changed sn targets to snavigator
* configure.in - changed sn targets to snavigator
+
+ * config-ml.in: After building symlink tree call make distclean
+ if a Makefile got linked into ${ml_dir}/${ml_libdir}; this happens
+ to be the case for libiberty.
+
+
+ * configure: When making link, also check the current
+ directory. The configure scripts may create one.
+
* config.sub: Accept alphapca56 and alphaev6 properly.
-start-sanitize-vr4320
- * config.sub (mips64vr4320-unknown-elf) : Added.
+ * configure.in: Revert 3 Jan change for powerpc-linux-gnulibc1.
-end-sanitize-vr4320
+
+
+ * config.sub (sco5): Fix typo.
* configure (redirect): Set to null, so default behavior of
configure is now --verbose.
+
+ * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Run configure with
+ CONFIG_SITE=/dev/null to forestall lossage with site configuration.
+
+
+ * Makefile.in (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS): Really add
+ this change to sync Makefile.in with its ChangeLog entries.
+
* ltmain.sh (mkdir): Check that the directory doesn't exist
* ltconfig, ltmain.sh: Update from libtool 1.0i.
+
+ * Makefile.in (BASE_FLAGS_TO_PASS): Don't pass PICFLAG and
+ PICFLAG_FOR_TARGET.
+ (EXTRA_TARGET_FLAGS): Don't pass PICFLAG_FOR_TARGET.
+
+ * configure: Emit a definition for the new macro enable_shared
+ into each Makefile.
+
+ * config/mh-sparcpic (PICFLAG): Define to properly according
+ to current multilib configuration.
+ * config/mt-sparcpic (PICFLAG_FOR_TARGET): Define to properly
+ according to current multilib configuration.
+
- * configure.in (host_tools, native_only): Add libtool.
+ * configure.in (host_tools, native_only): Add libtool.
- * configure.in: add target-gperf to noconfigdirs for Cygwin32.
+ * configure.in: add target-gperf to noconfigdirs for Cygwin32.
Fix typo in ming config comment.
is cygwin32. OK to build expect and dejagnu with Canadian
Cross.
-start-sanitize-sky
-
- * configure.in: Add dvp-elf support.
- * config.sub: Recognize dvp cpu.
-
-end-sanitize-sky
* configure.in: Do build expect, dejagnu, and cvssrc for a cygwin32
* .cvsignore: Remove *-info and *-install since they match
release-info and mpw-install, which we don't want to just ignore.
+
+ * configure.in: Revert 3 Jan change for alpha-linux-gnulibc1.
+
* Makefile.in (FLAGS_TO_PASS): Pass down gcc_include_dir and
* config.guess: HP 9000/803 is a PA1.1 machine.
-start-sanitize-vr5400
-
- * config.sub (mips64vr5xxx-elf): Handle. Treat as mips64vr5000-elf.
-
-end-sanitize-vr5400
* mkdep: New file.
-start-sanitize-ide
-
- * configure: Only put libide in GDB_TK if --enable-ide.
-
-end-sanitize-ide
-start-sanitize-d30v
* configure.in (d30v-*-*): Allow configuring of libide, vmake, etc.
-end-sanitize-d30v
* Makefile.in: Add libgui directory.
* Makefile.in (all-target-gperf): Change dependency to
all-target-libstdc++.
+
+ * config.guess: Add BeOS support.
+
Source directory cvs renamed to cvssrc:
(CLEAN_MODULES): Change clean-cvs to clean-cvssrc.
(all-cvssrc): Rename target from all-cvs.
- * configure.in (noconfigdirs): Add support for Thumb target.
+ * configure (gxx_include_dir): Fix thinko.
- * config.sub (maybe_os): Add support for Thumb target.
-start-sanitize-ide
+ * Makefile.in (INSTALL_TARGET_CROSS): Define.
+ (install-cross, install-gcc-cross): New targets.
- * configure (GDB_TK): add all-libide to dependency list
-
-
- * configure.in (host_libs): Build libide all of the time.
- (noconfigdirs): Remove libide from all places that set noconfigdirs.
+ * configure.in (noconfigdirs): Add support for Thumb target.
- * Makefile.in (all-vmake): remove double dependency on all-libide
+ * config.sub (maybe_os): Add support for Thumb target.
-end-sanitize-ide
* Makefile.in: Add rules for cygmon.
* configure.in: Build cygmon for sparc-elf and sparclite-aout.
+
+ * Makefile.in (INSTALL_TARGET): Do install-gcc first.
+ * configure (gxx_include_dir): Provide a definition for subdirs
+ which do not use autoconf.
+
* Makefile.in, configure, configure.in, ChangeLog: merge with foundry's
11/18/97 build
+
+ * From Franz Sirl.
+ * config.guess (powerpc*-*-linux): Handle glibc2 beta release
+ found on RedHat Linux systems.
+
+
+ * config.guess (alpha stuff): Merge with FSF to avoid incorrect
+ guesses.
+
+
+ * configure.in (i[3456]86-ncr-sysv4.3*): Tweak.
+
* ltmain.sh: If mkdir fails, check whether the directory was created
anyhow by some other process.
-start-sanitize-d30v
* configure.in (d30v-*-*): Configure all directories.
* configure.in (d30v-*-*): Configure target-libgloss on the D30V.
-end-sanitize-d30v
* include/libiberty.h: Add extern "C" { so it can be used with C++
* include/remote-sim.h: Add extern "C" { so it can be used with C++
programs.
-start-sanitize-tx19
-
- * config.sub: Move tx19 configury to reduce spurious differences
- with gcc/config.sub.
-
-end-sanitize-tx19
-start-sanitize-tx49
-
- * config.sub: Move tx49 configury to reduce spurious differences
- with gcc/config.sub.
-
-end-sanitize-tx49
-start-sanitize-d30v
* configure.in (d30v-*-*): Configure GCC now.
-end-sanitize-d30v
-start-sanitize-tx49
-
- * config.sub: Add tx49 configury.
-
-end-sanitize-tx49
-start-sanitize-ide
-
- * Makefile.in (install-foundry): New target.
-
-end-sanitize-ide
* configure.in: Remove a "second pass" of tweaking noconfigdirs,
* Makefile.in: check-target-libio depends on all-target-libstdc++.
-start-sanitize-vr5400
- * config.sub (maybe_os): Add mips64vr5400.
+ * Makefile.in (bootstrap-lean): Combined with `normal' bootstrap
+ targets using "$@" to provide support for similar but not identical
+ targets without having to duplicate code.
-end-sanitize-vr5400
* makefile.vms: Fix to work with DEC C.
-start-sanitize-ide
-
- * Makefile.in (all-jstools): Depend on all-tix.
-
-end-sanitize-ide
* config.sub: Add mips-tx39-elf to marketing names.
infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir,
sbindir, sharedstatedir, and sysconfdir.
-start-sanitize-d30v
+
+ * Makefile.in (bootstrap-lean): New target.
+
* configure.in (d30v): Remove tcl, tk, expect, gdb, itcl, tix, db,
sn, and gnuserv from noconfigdirs.
-end-sanitize-d30v
* ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.
-start-sanitize-gdbtk
+
+* Makefile.in (cross): New target.
+
+
+ * Makefile.in (bootstrap2, bootstrap3): New targets.
+ (all-bootstrap): Remove outdated and confusing target.
+ (bootstrap, bootstrap2, bootstrap3): Don't pass BOOT_CFLAGS down.
- * configure (tooldir): enable_gdbtk=YES for cygwin32, NO for
- windows. Consistent with gdb/configure.
-end-sanitize-gdbtk
* config/mt-linux: Define CXXFLAGS to make sure -fvtable-thunks is
* configure.in: remove bison from noconfigdirs for Cygwin32 host
+
+ * Makefile.in (local-distclean): Also remove mh-frag mt-frag.
+
+ * configure.in (skipdirs): Add target-librx for Linux.
+ (alpha-*-linux*): Use config/mh-elfalphapic and config/mt-elfalphapic.
+
+
+ * Makefile.in (bootstrap): New target.
+
+
+ * config.sub: Accept 'amigados' for backward compatability.
+
* config.guess: Merge with FSF.
* config.sub: Add "marketing-names" patch.
-start-sanitize-tx19
- * config.sub: Add tx19/r1900.
-
-end-sanitize-tx19
* configure.in (*-*-rtems*): Do not build libgloss for rtems.
-start-sanitize-ide
- * Makefile.in (GDB_TK): Add all-libide.
+ * config.sub: Handle v850-elf.
-end-sanitize-ide
* ltconfig: Set CONFIG_SHELL in libtool.
* ltmain.sh: Use CONFIG_SHELL instead of /bin/sh
+
+ * configure.in (target_subdir): Set to libraries if enable_multilib.
+
+
+ * config.guess: Update from gcc directory.
+
* Makefile.in (all-sim): Depends on all-readline.
* Makefile.in (BISON): Add -L flag.
(YACC): Likewise.
-start-sanitize-v850e
* configure.in (noconfigdirs): Add support for v850e target.
* config.sub (maybe_os): Add support for v850ea target.
-end-sanitize-v850e
* config.sub: Add mipstx39. Delete r3900.
-start-sanitize-ide
-
- * Makefile.in (all-vmake): Depends on all-tix.
-
-end-sanitize-ide
* Makefile.in (all-autoconf): Depends on all-texinfo.
BISON. Just set BISON to bison. When setting YACC, prefer bison.
* Makefile.in (all-bison): Depend upon all-texinfo.
-start-sanitize-ide
- * Makefile.in (all-vmake): Depend upon all-tix.
-
-end-sanitize-ide
* Makefile.in (BISON): bison, not byacc or bison -y.
* configure: If OSTYPE matches *win32*, try to find a good value for
CONFIG_SHELL.
-start-sanitize-ide
-
- * Makefile.in, configure.in: Handle jstools like vmake.
-
-end-sanitize-ide
* Makefile.in (taz): Get the version number from AM_INIT_AUTOMAKE in
* Makefile.in: Add automake targets.
* configure.in (host_tools): Add automake.
-start-sanitize-ide
-
- * Makefile.in (all-libide): Depend upon all-ilu.
-
-end-sanitize-ide
* configure: Default CXX to c++, not gcc.
* Makefile.in (CXX): Set to c++, not gcc.
(CXX_FOR_TARGET): When cross, transform c++, not gcc.
-start-sanitize-ide
-
- * Makefile.in: Add ILU targets.
- * configure.in (host_tools): Add ILU.
-
-end-sanitize-ide
* install-sh: try appending a .exe if source file doesn't
* Makefile.in (all-gcc): Don't depend on libiberty.
-start-sanitize-ide
-
- * configure.in (host_tools): Added vmake.
-
-end-sanitize-ide
* config.guess: improve algorithm for recognizing Gnu Hurd x86.
(CLEAN_MODULES): Added clean-gnuserv.
(all-gnuserv): New target.
-start-sanitize-ide
-
- * configure.in (host_libs): Added libide.
- Skip libide, vmake if no X. Also skip these everywhere that sn is
- skipped.
-
- * Makefile.in (ALL_MODULES): Added all-vmake, all-libide.
- (CROSS_CHECK_MODULES): Added check-vmake, check-libide.
- (INSTALL_MODULES): Added install-vmake, install-libide.
- (CLEAN_MODULES): Added clean-vmake, clean-libide.
- (all-vmake, all-libide): New targets.
-
-end-sanitize-ide
* config.guess: Fixes for MIPS OpenBSD systems.
* configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
-start-sanitize-tic80
* configure.in: Remove noconfigdirs case since gdb also
configures and builds for tic80-coff.
-end-sanitize-tic80
* configure: Set cache_file to config.cache.
* COPYING: Update FSF address.
-start-sanitize-tic80
* configure.in (tic80-*-*): Remove G++ libraries and libgloss from
noconfigdirs.
-end-sanitize-tic80
* Makefile.in (install-dirs): Don't crash if prefix, and hence
* configure.in (noconfigdirs): Remove tcl and tk from
noconfigdirs for cygwin32 builds.
-start-sanitize-tic80
* configure.in (tic80-*-*): Remove ld from noconfigdirs.
-end-sanitize-tic80
* Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
* config.sub: Accept -lnews*.
-start-sanitize-d30v
* configure.in (noconfigdirs): Disable target-newlib,
target-examples and target-libiberty for d30v.
-end-sanitize-d30v
-start-sanitize-tic80
-
- * configure.in (host_libs): Build itcl after tcl, tk.
-
- * configure.in (host_libs): Added db, itcl.
- (host_tools): Added sn.
- (noconfigdirs): Added itcl, db, sn in appropriate places.
- (native_only): Added sn.
-
- * Makefile.in (all-db, all-sn): New targets.
- (ALL_MODULES): Added all-sn.
- (CROSS_CHECK_MODULES): Added check-sn.
- (INSTALL_MODULES): Added install-sn.
- (CLEAN_MODULES): Added clean-sn.
-
-end-sanitize-tic80
-start-sanitize-d30v
* configure.in (noconfigdirs): Enable ld for d30v.
-end-sanitize-d30v
-start-sanitize-tic80
* configure.in (tic80-*-*): Build compiler.
-end-sanitize-tic80
-start-sanitize-d30v
* configure.in (d30v-*): Remove sim directory from list of
unsupported d30v directories
-end-sanitize-d30v
-start-sanitize-d30v
* config.sub, configure.in: Add d30v target cpu.
-end-sanitize-d30v
* makefile.vms: New file.
* Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
-start-sanitize-r5900
-
- * config.sub, configure.in: add r5900
-
-end-sanitize-r5900
* Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
* Makefile.in (all-target-winsup): Depend on all-target-libio.
-start-sanitize-tic80
* configure.in (tic80-*-*): Turn off most targets right now.
-end-sanitize-tic80
* Makefile.in (MAKEINFO): Check for the existence of the Makefile,
* config.sub, config.guess: Merge with latest FSF sources.
-start-sanitize-tic80
* config.sub (case $basic_machine): Add tic80 entries.
-end-sanitize-tic80
* config.sub, config.guess: Merge with latest FSF sources.
* config.sub: Handle d10v-unknown.
-
- * gcc/depragmaize.c: Handle MSDOS's (non-unix) text files.
-
* config.sub: Handle v850-unknown.
-start-sanitize-gdbtk
- * configure: enable_gdbtk=no for cygwin32-hosted toolchains
-end-sanitize-gdbtk
* configure.in: remove make from disable-if-Can-Cross list
enable gdb if ${host} and ${target} are cygwin32
* configure.in: Make sure that ${CC} can be used to compile an
executable.
-start-sanitize-gdbtk
-
- * Makefile.in (all-gdb): Depend on $(GDB_TK).
- * configure (GDB_TK): Set GDB_TK to either "all-tcl all-tk" or
- nothing depending on whether gdbtk is being built.
-
-end-sanitize-gdbtk
* Makefile.in (newlib.tar.gz): Delete building of newlib's info files.
* configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
(i386-win32 host): Likewise. Don't build readline.
-start-sanitize-gdbtk
-
- * Makefile.in (GDBTK_SUPPORT_DIRS): Define and pass as part of
- SUPPORT_FILES to submakes.
-
-end-sanitize-gdbtk
* Makefile.in (GDB_SUPPORT_DIRS): Add utils.
* configure.in: Recognize --with-newlib.
(sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
-start-sanitize-gdbtk
-
- * Makefile.in: move {all,check,install}-gdb from *_MODULES
- to *_X11_MODULES due to gdbtk needing X include files et al.
-
-end-sanitize-gdbtk
Merge in support for Mac MPW as a host.
projects / binutils.git / blobdiff