Both programs are capabale of displaying the contents of ELF format files,
so why does the binutils project have two file dumpers ?
-
+
The reason is that objdump sees an ELF file through a BFD filter of the
world; if BFD has a bug where, say, it disagrees about a machine constant
in e_flags, then the odds are good that it will remain internally
/* If the top 8 bits are 0x78 the next 8 are the os/abi ID. */
if ((sh_type & 0xFF000000) == SHT_IA_64_LOPSREG)
return get_osabi_name ((sh_type & 0x00FF0000) >> 16);
-
+
switch (sh_type)
{
case SHT_IA_64_EXT: return "IA_64_EXT";
if (string_table == NULL)
return 0;
-
+
string_table_length = section->sh_size;
}
const char *name;
int has_dynamic_reloc;
unsigned int i;
-
+
has_dynamic_reloc = 0;
for (i = 0; i < ARRAY_SIZE (dynamic_relocations); i++)
{
switch (entry->d_tag)
{
- case DT_IA_64_PLT_RESERVE:
+ case DT_IA_64_PLT_RESERVE:
/* First 3 slots reserved. */
print_vma (entry->d_un.d_ptr, PREFIX_HEX);
printf (" -- ");
return len;
}
+/* Finds section NAME inside FILE and returns a
+ pointer to it, or NULL upon failure. */
+
+static Elf_Internal_Shdr *
+find_section (const char * name)
+{
+ Elf_Internal_Shdr *sec;
+ unsigned int i;
+
+ for (i = elf_header.e_shnum, sec = section_headers + i - 1;
+ i; --i, --sec)
+ if (strcmp (SECTION_NAME (sec), name) == 0)
+ break;
+
+ if (i && sec && sec->sh_size != 0)
+ return sec;
+
+ return NULL;
+}
+
/* Size of pointers in the .debug_line section. This information is not
really present in that section. It's obtained before dumping the debug
sections by doing some pre-scan of the .debug_info section. */
-static int debug_line_pointer_size = 4;
+static unsigned int * debug_line_pointer_sizes = NULL;
+static unsigned int num_debug_line_pointer_sizes = 0;
+
+/* Locate and scan the .debug_info section in the file and record the pointer
+ sizes for the compilation units in it. Usually an executable will have
+ just one pointer size, but this is not guaranteed, and so we try not to
+ make any assumptions. Returns zero upon failure, or the number of
+ compilation units upon success. */
+
+static unsigned int
+get_debug_line_pointer_sizes (FILE * file)
+{
+ Elf_Internal_Shdr * section;
+ unsigned char * start;
+ unsigned char * end;
+ unsigned char * begin;
+ unsigned long length;
+ unsigned int num_units;
+ unsigned int unit;
+
+ section = find_section (".debug_info");
+ if (section == NULL)
+ return 0;
+
+ length = section->sh_size;
+ start = get_data (NULL, file, section->sh_offset, section->sh_size,
+ _("extracting pointer sizes from .debug_info section"));
+ if (start == NULL)
+ return 0;
+
+ end = start + section->sh_size;
+ /* First scan the section to get the number of comp units. */
+ for (begin = start, num_units = 0; begin < end; num_units++)
+ {
+ /* Read the first 4 bytes. For a 32-bit DWARF section, this will
+ be the length. For a 64-bit DWARF section, it'll be the escape
+ code 0xffffffff followed by an 8 byte length. */
+ length = byte_get (begin, 4);
+
+ if (length == 0xffffffff)
+ {
+ length = byte_get (begin + 4, 8);
+ begin += length + 12;
+ }
+ else
+ begin += length + 4;
+ }
+
+ if (num_units == 0)
+ {
+ error (_("No comp units in .debug_info section ?"));
+ free (start);
+ return 0;
+ }
+
+ /* Then allocate an array to hold the pointer sizes. */
+ debug_line_pointer_sizes = malloc (num_units * sizeof * debug_line_pointer_sizes);
+ if (debug_line_pointer_sizes == NULL)
+ {
+ error (_("Not enough memory for a pointer size array of %u entries"),
+ num_units);
+ free (start);
+ return 0;
+ }
+
+ /* Populate the array. */
+ for (begin = start, unit = 0; begin < end; unit++)
+ {
+ length = byte_get (begin, 4);
+ if (length == 0xffffffff)
+ {
+ /* For 64-bit DWARF, the 1-byte address_size field is 22 bytes
+ from the start of the section. This is computed as follows:
+
+ unit_length: 12 bytes
+ version: 2 bytes
+ debug_abbrev_offset: 8 bytes
+ -----------------------------
+ Total: 22 bytes */
+
+ debug_line_pointer_sizes [unit] = byte_get (begin + 22, 1);
+ length = byte_get (begin + 4, 8);
+ begin += length + 12;
+ }
+ else
+ {
+ /* For 32-bit DWARF, the 1-byte address_size field is 10 bytes from
+ the start of the section:
+
+ unit_length: 4 bytes
+ version: 2 bytes
+ debug_abbrev_offset: 4 bytes
+ -----------------------------
+ Total: 10 bytes */
+
+ debug_line_pointer_sizes [unit] = byte_get (begin + 10, 1);
+ begin += length + 4;
+ }
+ }
+
+ free (start);
+ num_debug_line_pointer_sizes = num_units;
+ return num_units;
+}
static int
display_debug_lines (Elf_Internal_Shdr *section,
- unsigned char * start,
- FILE *file ATTRIBUTE_UNUSED)
+ unsigned char *start, FILE *file)
{
unsigned char *hdrptr;
DWARF2_Internal_LineInfo info;
int i;
int offset_size;
int initial_length_size;
+ unsigned int comp_unit = 0;
printf (_("\nDump of debug contents of section %s:\n\n"),
SECTION_NAME (section));
+ if (num_debug_line_pointer_sizes == 0)
+ get_debug_line_pointer_sizes (file);
+
while (data < end)
{
+ unsigned int pointer_size;
+
hdrptr = data;
/* Check the length of the block. */
info.li_line_base <<= 24;
info.li_line_base >>= 24;
+ /* Get the pointer size from the comp unit associated
+ with this block of line number information. */
+ if (comp_unit >= num_debug_line_pointer_sizes)
+ {
+ error (_("Not enough comp units for .debug_lines section\n"));
+ return 0;
+ }
+ else
+ {
+ pointer_size = debug_line_pointer_sizes [comp_unit];
+ comp_unit ++;
+ }
+
printf (_(" Length: %ld\n"), info.li_length);
printf (_(" DWARF Version: %d\n"), info.li_version);
printf (_(" Prologue Length: %d\n"), info.li_prologue_length);
printf (_(" Line Base: %d\n"), info.li_line_base);
printf (_(" Line Range: %d\n"), info.li_line_range);
printf (_(" Opcode Base: %d\n"), info.li_opcode_base);
+ printf (_(" (Pointer size: %u)\n"), pointer_size);
end_of_sequence = data + info.li_length + initial_length_size;
{
case DW_LNS_extended_op:
data += process_extended_line_op (data, info.li_default_is_stmt,
- debug_line_pointer_size);
+ pointer_size);
break;
case DW_LNS_copy:
load_debug_loc (FILE *file)
{
Elf_Internal_Shdr *sec;
- unsigned int i;
/* If it is already loaded, do nothing. */
if (debug_loc_contents != NULL)
return;
/* Locate the .debug_loc section. */
- for (i = 0, sec = section_headers;
- i < elf_header.e_shnum;
- i++, sec++)
- if (strcmp (SECTION_NAME (sec), ".debug_loc") == 0)
- break;
-
- if (i == elf_header.e_shnum || sec->sh_size == 0)
+ sec = find_section (".debug_loc");
+ if (sec == NULL)
return;
debug_loc_size = sec->sh_size;
static int
display_debug_loc (Elf_Internal_Shdr *section,
- unsigned char *start,
- FILE *file ATTRIBUTE_UNUSED)
+ unsigned char *start, FILE *file)
{
unsigned char *section_end;
unsigned long bytes;
unsigned char *section_begin = start;
bfd_vma addr;
+ unsigned int comp_unit = 0;
addr = section->sh_addr;
bytes = section->sh_size;
return 0;
}
+ if (num_debug_line_pointer_sizes == 0)
+ get_debug_line_pointer_sizes (file);
+
printf (_("Contents of the .debug_loc section:\n\n"));
printf (_("\n Offset Begin End Expression\n"));
unsigned long end;
unsigned short length;
unsigned long offset;
+ unsigned int pointer_size;
offset = start - section_begin;
+ /* Get the pointer size from the comp unit associated
+ with this block of location information. */
+ if (comp_unit >= num_debug_line_pointer_sizes)
+ {
+ error (_("Not enough comp units for .debug_loc section\n"));
+ return 0;
+ }
+ else
+ {
+ pointer_size = debug_line_pointer_sizes [comp_unit];
+ comp_unit ++;
+ }
+
while (1)
{
- /* Normally, the lists in the debug_loc section are related to a
- given compilation unit, and thus, we would use the pointer size
- of that compilation unit. However, since we are displaying it
- separately here, we either have to store pointer sizes of all
- compilation units, or assume they don't change. We assume,
- like the debug_line display, that it doesn't change. */
- begin = byte_get (start, debug_line_pointer_size);
- start += debug_line_pointer_size;
- end = byte_get (start, debug_line_pointer_size);
- start += debug_line_pointer_size;
+ begin = byte_get (start, pointer_size);
+ start += pointer_size;
+ end = byte_get (start, pointer_size);
+ start += pointer_size;
if (begin == 0 && end == 0)
break;
start += 2;
printf (" %8.8lx %8.8lx %8.8lx (", offset, begin, end);
- decode_location_expression (start, debug_line_pointer_size, length);
+ decode_location_expression (start, pointer_size, length);
printf (")\n");
start += length;
load_debug_str (FILE *file)
{
Elf_Internal_Shdr *sec;
- unsigned int i;
/* If it is already loaded, do nothing. */
if (debug_str_contents != NULL)
return;
/* Locate the .debug_str section. */
- for (i = 0, sec = section_headers;
- i < elf_header.e_shnum;
- i++, sec++)
- if (strcmp (SECTION_NAME (sec), ".debug_str") == 0)
- break;
-
- if (i == elf_header.e_shnum || sec->sh_size == 0)
+ sec = find_section (".debug_str");
+ if (sec == NULL)
return;
debug_str_size = sec->sh_size;
unsigned char *hdrptr;
unsigned char *cu_abbrev_offset_ptr;
unsigned char *tags;
- unsigned int i;
int level;
unsigned long cu_offset;
int offset_size;
unsigned char *begin;
/* Locate the .debug_abbrev section and process it. */
- for (i = 0, sec = section_headers;
- i < elf_header.e_shnum;
- i++, sec++)
- if (strcmp (SECTION_NAME (sec), ".debug_abbrev") == 0)
- break;
-
- if (i == elf_header.e_shnum || sec->sh_size == 0)
+ sec = find_section (".debug_abbrev");
+ if (sec == NULL)
{
warn (_("Unable to locate .debug_abbrev section!\n"));
return 0;
return 1;
}
-/* Pre-scan the .debug_info section to record the size of address.
- When dumping the .debug_line, we use that size information, assuming
- that all compilation units have the same address size. */
-static int
-prescan_debug_info (Elf_Internal_Shdr *section ATTRIBUTE_UNUSED,
- unsigned char *start,
- FILE *file ATTRIBUTE_UNUSED)
-{
- unsigned long length;
-
- /* Read the first 4 bytes. For a 32-bit DWARF section, this will
- be the length. For a 64-bit DWARF section, it'll be the escape
- code 0xffffffff followed by an 8 byte length. For the purposes
- of this prescan, we don't care about the actual length, but the
- presence of the escape bytes does affect the location of the byte
- which describes the address size. */
- length = byte_get (start, 4);
-
- if (length == 0xffffffff)
- {
- /* For 64-bit DWARF, the 1-byte address_size field is 22 bytes
- from the start of the section. This is computed as follows:
-
- unit_length: 12 bytes
- version: 2 bytes
- debug_abbrev_offset: 8 bytes
- -----------------------------
- Total: 22 bytes */
-
- debug_line_pointer_size = byte_get (start + 22, 1);
- }
- else
- {
- /* For 32-bit DWARF, the 1-byte address_size field is 10 bytes from
- the start of the section:
- unit_length: 4 bytes
- version: 2 bytes
- debug_abbrev_offset: 4 bytes
- -----------------------------
- Total: 10 bytes */
-
- debug_line_pointer_size = byte_get (start + 10, 1);
- }
- return 0;
-}
-
- /* A structure containing the name of a debug section and a pointer
- to a function that can decode it. The third field is a prescan
- function to be run over the section before displaying any of the
- sections. */
+/* A structure containing the name of a debug section
+ and a pointer to a function that can decode it. */
struct
{
const char *const name;
int (*display) (Elf_Internal_Shdr *, unsigned char *, FILE *);
- int (*prescan) (Elf_Internal_Shdr *, unsigned char *, FILE *);
}
debug_displays[] =
{
- { ".debug_abbrev", display_debug_abbrev, NULL },
- { ".debug_aranges", display_debug_aranges, NULL },
- { ".debug_frame", display_debug_frames, NULL },
- { ".debug_info", display_debug_info, prescan_debug_info },
- { ".debug_line", display_debug_lines, NULL },
- { ".debug_pubnames", display_debug_pubnames, NULL },
- { ".eh_frame", display_debug_frames, NULL },
- { ".debug_macinfo", display_debug_macinfo, NULL },
- { ".debug_str", display_debug_str, NULL },
- { ".debug_loc", display_debug_loc, NULL },
- { ".debug_pubtypes", display_debug_not_supported, NULL },
- { ".debug_ranges", display_debug_not_supported, NULL },
- { ".debug_static_func", display_debug_not_supported, NULL },
- { ".debug_static_vars", display_debug_not_supported, NULL },
- { ".debug_types", display_debug_not_supported, NULL },
- { ".debug_weaknames", display_debug_not_supported, NULL }
+ { ".debug_abbrev", display_debug_abbrev },
+ { ".debug_aranges", display_debug_aranges },
+ { ".debug_frame", display_debug_frames },
+ { ".debug_info", display_debug_info },
+ { ".debug_line", display_debug_lines },
+ { ".debug_pubnames", display_debug_pubnames },
+ { ".eh_frame", display_debug_frames },
+ { ".debug_macinfo", display_debug_macinfo },
+ { ".debug_str", display_debug_str },
+ { ".debug_loc", display_debug_loc },
+ { ".debug_pubtypes", display_debug_not_supported },
+ { ".debug_ranges", display_debug_not_supported },
+ { ".debug_static_func", display_debug_not_supported },
+ { ".debug_static_vars", display_debug_not_supported },
+ { ".debug_types", display_debug_not_supported },
+ { ".debug_weaknames", display_debug_not_supported }
};
static int
if (! do_dump)
return 1;
- /* Pre-scan the debug sections to find some debug information not
- present in some of them. For the .debug_line, we must find out the
- size of address (specified in .debug_info and .debug_aranges). */
- for (i = 0, section = section_headers;
- i < elf_header.e_shnum && i < num_dump_sects;
- i++, section++)
- {
- char *name = SECTION_NAME (section);
- int j;
-
- if (section->sh_size == 0)
- continue;
-
- /* See if there is some pre-scan operation for this section. */
- for (j = NUM_ELEM (debug_displays); j--;)
- if (strcmp (debug_displays[j].name, name) == 0)
- {
- if (debug_displays[j].prescan != NULL)
- {
- bfd_size_type length;
- unsigned char *start;
-
- length = section->sh_size;
- start = get_data (NULL, file, section->sh_offset, length,
- _("debug section data"));
- if (!start)
- return 0;
-
- debug_displays[j].prescan (section, start, file);
- free (start);
- }
-
- break;
- }
- }
-
for (i = 0, section = section_headers;
i < elf_header.e_shnum && i < num_dump_sects;
i++, section++)
switch (e_type)
{
+ case NT_AUXV: return _("NT_AUXV (auxiliary vector)");
case NT_PRSTATUS: return _("NT_PRSTATUS (prstatus structure)");
case NT_FPREGSET: return _("NT_FPREGSET (floating point registers)");
case NT_PRPSINFO: return _("NT_PRPSINFO (prpsinfo structure)");
projects / binutils.git / blobdiff