# Makefile template for Configure for the sim library.
-# Copyright (C) 1993 Free Software Foundation, Inc.
+# Copyright (C) 1993, 1995, 1997, 1998 Free Software Foundation, Inc.
# Written by Cygnus Support.
#
# This file is part of BFD, the Binary File Descriptor library.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-srcdir = .
+VPATH = @srcdir@
+srcdir = @srcdir@
-prefix = /usr/local
+prefix = @prefix@
+exec_prefix = @exec_prefix@
-exec_prefix = $(prefix)
-bindir = $(exec_prefix)/bin
-libdir = $(exec_prefix)/lib
+host_alias = @host_alias@
+target_alias = @target_alias@
+program_transform_name = @program_transform_name@
+bindir = @bindir@
+libdir = @libdir@
+tooldir = $(libdir)/$(target_alias)
-datadir = $(prefix)/lib
-mandir = $(prefix)/man
+datadir = @datadir@
+mandir = @mandir@
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
-infodir = $(prefix)/info
-includedir = $(prefix)/include
-oldincludedir =
-docdir = doc
+infodir = @infodir@
+includedir = @includedir@
-SHELL = /bin/sh
+SHELL = @SHELL@
-INSTALL = install -c
-INSTALL_PROGRAM = $(INSTALL)
-INSTALL_DATA = $(INSTALL)
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
-AR = ar
+AR = @AR@
AR_FLAGS = rc
-CFLAGS = -g
-BISON = bison
+CC = @CC@
+CFLAGS = @CFLAGS@
+CC_FOR_BUILD = @CC_FOR_BUILD@
MAKEINFO = makeinfo
-RANLIB = ranlib
+RANLIB = @RANLIB@
+
+SUBDIRS = @subdirs@
INCDIR = $(srcdir)/../include
CSEARCH = -I. -I$(srcdir) -I$(INCDIR)
DEP = mkdep
-SUBDIRS = " this is set by configire, don't change this "
-
-ALL=all-nothing
-CLEAN=clean-nothing
-DO_INSTALL=install-nothing
+# compilers to use to create programs which must be run in the build
+# environment.
+CC_FOR_BUILD = $(CC)
-#### host and target dependent Makefile fragments come in here.
+#### Makefile fragments come in here.
+# @target_makefile_frag@
###
+RUNTEST = `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
+ echo $${srcdir}/../dejagnu/runtest ; else echo runtest; \
+ fi`
+RUNTESTFLAGS=
+
FLAGS_TO_PASS = \
"prefix=$(prefix)" \
"exec_prefix=$(exec_prefix)" \
"AR=$(AR)" \
"AR_FLAGS=$(AR_FLAGS)" \
"CC=$(CC)" \
+ "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
"CFLAGS=$(CFLAGS)" \
"RANLIB=$(RANLIB)" \
"MAKEINFO=$(MAKEINFO)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
- "BISON=$(BISON)"
-
+ "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
+ "SHELL=$(SHELL)"
-STAGESTUFF = $(TARGETLIB) $(OFILES)
+# The use of $$(x_FOR_TARGET) reduces the command line length by not
+# duplicating the lengthy definition.
+TARGET_FLAGS_TO_PASS = \
+ "prefix=$(prefix)" \
+ "exec_prefix=$(exec_prefix)" \
+ "against=$(against)" \
+ 'CC=$$(CC_FOR_TARGET)' \
+ "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
+ "CFLAGS=$(CFLAGS)" \
+ "CHILLFLAGS=$(CHILLFLAGS)" \
+ 'CHILL=$$(CHILL_FOR_TARGET)' \
+ "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
+ "CHILL_LIB=$(CHILL_LIB)" \
+ 'CXX=$$(CXX_FOR_TARGET)' \
+ "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
+ "CXXFLAGS=$(CXXFLAGS)" \
+ "INSTALL=$(INSTALL)" \
+ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
+ "INSTALL_DATA=$(INSTALL_DATA)" \
+ "MAKEINFO=$(MAKEINFO)" \
+ "RUNTESTFLAGS=$(RUNTESTFLAGS)"
+
+
+all:
+ @rootme=`pwd` ; export rootme ; \
+ for dir in . `echo ${SUBDIRS} | sed 's/testsuite//'` ; do \
+ if [ "$$dir" = "." ]; then \
+ true; \
+ elif [ -d $$dir ]; then \
+ (cd $$dir; $(MAKE) $(FLAGS_TO_PASS)); \
+ else true; fi; \
+ done
+
+clean mostlyclean:
+ @rootme=`pwd` ; export rootme ; \
+ for dir in . ${SUBDIRS}; do \
+ if [ "$$dir" = "." ]; then \
+ true; \
+ elif [ -d $$dir ]; then \
+ (cd $$dir; $(MAKE) $(FLAGS_TO_PASS) $@); \
+ else true; fi; \
+ done
+
+distclean maintainer-clean realclean:
+ @rootme=`pwd` ; export rootme ; \
+ for dir in . ${SUBDIRS}; do \
+ if [ "$$dir" = "." ]; then \
+ true; \
+ elif [ -d $$dir ]; then \
+ (cd $$dir; $(MAKE) $(FLAGS_TO_PASS) $@); \
+ else true; fi; \
+ done
+ rm -f Makefile config.cache config.log config.status
+
+install:
+ @rootme=`pwd` ; export rootme ; \
+ for dir in . ${SUBDIRS}; do \
+ if [ "$$dir" = "." ]; then \
+ true; \
+ elif [ -d $$dir ]; then \
+ (cd $$dir; $(MAKE) $(FLAGS_TO_PASS) install); \
+ else true; fi; \
+ done
+installcheck:
+ @echo No installcheck target is available yet for the GNU simulators.
-all: $(ALL)
-
-clean: $(CLEAN)
+installcheck:
-install: $(DO_INSTALL)
+# The check target can not use subdir_do, because subdir_do does not
+# use TARGET_FLAGS_TO_PASS.
+check: force
+ @if [ -f testsuite/Makefile ]; then \
+ rootme=`pwd`; export rootme; \
+ rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
+ cd testsuite; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
+ else true; fi
-mostlyclean: clean
-distclean realclean: clean
- rm -f Makefile config.status
info:
install-info:
###
###
+.NOEXPORT:
+MAKEOVERRIDES=
+
.PHONY: check installcheck
check:
installcheck:
-### none
-
-all-nothing: force
-
-clean-nothing: force
-
-install-nothing: force
-
-
-### z8k
-
-all-z8k: force
- if [ -f ./z8k/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- ( cd ./z8k ; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-z8k: force
- if [ -f ./z8k/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- ( cd ./z8k ; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-clean-z8k: force
- if [ -f ./z8k/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- ( cd ./z8k ; $(MAKE) $(FLAGS_TO_PASS) clean) ; \
- else \
- true ; \
- fi
-
-
-### h8300
-
-all-h8300: force
- if [ -f ./h8300/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- ( cd ./h8300 ; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-h8300: force
- if [ -f ./h8300/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- ( cd ./h8300 ; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-clean-h8300: force
- if [ -f ./h8300/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- ( cd ./h8300 ; $(MAKE) $(FLAGS_TO_PASS) clean) ; \
- else \
- true ; \
- fi
-
-###
-
-### h8500
-
-all-h8500: endian.h force
- if [ -f ./h8500/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- ( cd ./h8500 ; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-h8500: force
- if [ -f ./h8500/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- ( cd ./h8500 ; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-clean-h8500: force
- if [ -f ./h8500/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- ( cd ./h8500 ; $(MAKE) $(FLAGS_TO_PASS) clean) ; \
- else \
- true ; \
- fi
-
-###
-
-### sh
-
-all-sh: force
- if [ -f ./sh/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- ( cd ./sh ; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-sh: force
- if [ -f ./sh/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- ( cd ./sh ; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-clean-sh: force
- if [ -f ./sh/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- ( cd ./sh ; $(MAKE) $(FLAGS_TO_PASS) clean) ; \
- else \
- true ; \
- fi
-
-###
+TAGS:
force:
-
-# with the gnu make, this is done automatically.
-
-Makefile: $(srcdir)/Makefile.in $(target_makefile_frag)
+Makefile: Makefile.in config.status
$(SHELL) ./config.status
+
+config.status: configure
+ $(SHELL) ./config.status --recheck
+
+# Utility to run autoconf in each directory that uses the common framework.
+# This is intended to be invoked in $srcdir as
+# "make -f Makefile.in autoconf-common".
+.PHONY: autoconf-common
+autoconf-common autoheader-common:
+ for d in * ; \
+ do \
+ if [ -d $$d -a -f $$d/configure.in ] ; \
+ then \
+ echo "Running autoconf in $$d ..." ; \
+ (cd $$d && autoconf) ; \
+ if [ $@ = autoheader-common ] ; \
+ then \
+ echo "Running autoheader in $$d ..." ; \
+ (cd $$d && autoheader) ; \
+ fi ; \
+ fi ; \
+ done
+
+autoconf-changelog autoheader-changelog:
+ id="`id | sed -e 's/^[^(]*(\([^)]*\).*$$/\1/'`" ; \
+ name=`grep "^$$id:" /etc/passwd | cut -f 5 -d ':'` ; \
+ host="`hostname`" ; \
+ date="`date | sed 's/ [^ ]* \([0-9]*\)$$/ \1/'`" ; \
+ echo "$$date $$name $$id@$$host" ; \
+ for d in * ; \
+ do \
+ if [ -d $$d -a -f $$d/configure.in ] ; \
+ then \
+ echo "Creating new-ChangeLog in $$d ..." ; \
+ ( echo "$$date $$name <$$id@$$host>" ; \
+ echo "" ; \
+ echo " * configure: Regenerated to track ../common/aclocal.m4 changes." ; \
+ if [ $@ = autoheader-changelog ] ; \
+ then \
+ echo " * config.in: Ditto." ; \
+ fi ; \
+ echo "" ; \
+ cat $$d/ChangeLog \
+ ) > $$d/new-ChangeLog ; \
+ fi ; \
+ done
+
+autoconf-install autoheader-install:
+ for d in * ; \
+ do \
+ if [ -d $$d -a -f $$d/configure.in ] ; \
+ then \
+ echo "Moving $$d/new-ChangeLog to $$d/ChangeLog ..." ; \
+ mv $$d/new-ChangeLog $$d/ChangeLog ; \
+ fi ; \
+ done
projects / binutils.git / blobdiff