+# Flags to pass down to all sub-makes.
+# Please keep these in alphabetical order.
+BASE_FLAGS_TO_PASS = \
+ "AR_FLAGS=$(AR_FLAGS)" \
+ "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
+ "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
+ "BISON=$(BISON)" \
+ "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
+ "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
+ "CFLAGS=$(CFLAGS)" \
+ $(start-sanitize-chill)\
+ "CHILLFLAGS=$(CHILLFLAGS)" \
+ "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
+ "CHILL_LIB=$(CHILL_LIB)" \
+ $(end-sanitize-chill)\
+ "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
+ "CXXFLAGS=$(CXXFLAGS)" \
+ "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
+ 'GCC_FOR_TARGET=$$(CC_FOR_TARGET)' \
+ "INSTALL=$(INSTALL)" \
+ "INSTALL_DATA=$(INSTALL_DATA)" \
+ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
+ "INSTALL_XFORM=$(INSTALL_XFORM)" \
+ "LDFLAGS=$(LDFLAGS)" \
+ "LEX=$(LEX)" \
+ "LOADLIBES=$(LOADLIBES)" \
+ "MAKEINFO=$(MAKEINFO)" \
+ "MUNCH_NM=$(MUNCH_NM)" \
+ "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
+ "PRMS=$(PRMS)" \
+ "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
+ "EXPECT=$(EXPECT)" \
+ "RUNTEST=$(RUNTEST)" \
+ "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
+ "XTRAFLAGS_FOR_TARGET=$(XTRAFLAGS)" \
+ "exec_prefix=$(exec_prefix)" \
+ "prefix=$(prefix)" \
+ "tooldir=$(tooldir)"
+
+# Flags to pass down to most sub-makes, in which we're building with
+# the host environment.
+# If any variables are added here, they must be added to do-*, below.
+EXTRA_HOST_FLAGS = \
+ 'AR=$(AR)' \
+ 'AS=$(AS)' \
+ 'CC=$(CC)' \
+ 'CXX=$(CXX)' \
+ 'NM=$(NM)' \
+ 'RANLIB=$(RANLIB)' \
+ 'XTRAFLAGS='
+
+FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
+
+# Flags that are concerned with the location of the X11 include files
+# and library files
+X11_FLAGS_TO_PASS = \
+ "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
+ "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
+ "X11_LIB=$(X11_LIB)"
+
+# Flags to pass down to makes which are built with the target environment.
+# The double $ decreases the length of the command line; the variables
+# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
+# If any variables are added here, they must be added to do-*, below.
+EXTRA_TARGET_FLAGS = \
+ 'AR=$$(AR_FOR_TARGET)' \
+ 'AS=$$(AS_FOR_TARGET)' \
+ 'CC=$$(CC_FOR_TARGET)' \
+ 'CXX=$$(CXX_FOR_TARGET)' \
+ 'NM=$$(NM_FOR_TARGET)' \
+ 'RANLIB=$$(RANLIB_FOR_TARGET)' \
+ 'XTRAFLAGS=$$(XTRAFLAGS_FOR_TARGET)'
+
+TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
+
+# Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
+# unfortunately needs the native compiler and the target ar and
+# ranlib.
+# If any variables are added here, they must be added to do-*, below.
+# The HOST_* variables are a special case, which are used for the gcc
+# cross-building scheme.
+HOST_CC = $(CC_FOR_BUILD)
+HOST_PREFIX =
+HOST_PREFIX_1 = loser-
+EXTRA_GCC_FLAGS = \
+ 'AR=$$(AR_FOR_TARGET)' \
+ 'AS=$(AS)' \
+ 'CC=$(CC)' \
+ 'CXX=$(CXX)' \
+ 'HOST_CC=$(CC_FOR_BUILD)' \
+ 'HOST_PREFIX=$(HOST_PREFIX)' \
+ 'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
+ 'NM=$(NM)' \
+ 'RANLIB=$$(RANLIB_FOR_TARGET)' \
+ 'XTRAFLAGS='
+
+GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(FLAGS_TO_PASS).
+ALL_MODULES = \
+ all-autoconf \
+ all-bfd \
+ all-binutils \
+ all-byacc \
+ all-cvs \
+ all-dejagnu \
+ all-diff \
+ all-etc \
+ all-fileutils \
+ all-find \
+ all-flex \
+ all-gas \
+ all-gawk \
+ all-gdb \
+ all-gprof \
+ all-grep \
+ all-gzip \
+ all-hello \
+ all-indent \
+ all-ispell \
+ all-ld \
+ all-libiberty \
+ all-m4 \
+ all-make \
+ all-mmalloc \
+ all-opcodes \
+ all-patch \
+ all-prms \
+ all-rcs \
+ all-readline \
+ all-release \
+ all-recode \
+ all-sed \
+ all-send-pr \
+ all-shellutils \
+ all-sim \
+ all-tar \
+ all-tcl \
+ all-texinfo \
+ all-textutils \
+ all-tgas \
+ all-time \
+ all-uudecode \
+ all-wdiff
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(FLAGS_TO_PASS).
+CHECK_MODULES = \
+ check-autoconf \
+ check-bfd \
+ check-binutils \
+ check-byacc \
+ check-cvs \
+ check-dejagnu \
+ check-diff \
+ check-etc \
+ check-fileutils \
+ check-find \
+ check-flex \
+ check-gas \
+ check-gawk \
+ check-gdb \
+ check-gprof \
+ check-grep \
+ check-gzip \
+ check-hello \
+ check-indent \
+ check-ispell \
+ check-ld \
+ check-libiberty \
+ check-m4 \
+ check-make \
+ check-mmcheckoc \
+ check-opcodes \
+ check-patch \
+ check-prms \
+ check-rcs \
+ check-readline \
+ check-recode \
+ check-sed \
+ check-send-pr \
+ check-shellutils \
+ check-sim \
+ check-tar \
+ check-tcl \
+ check-texinfo \
+ check-textutils \
+ check-tgas \
+ check-time \
+ check-uudecode \
+ check-wdiff
+
+# This is a list of the install targets for all of the modules which are
+# compiled using $(FLAGS_TO_PASS).
+INSTALL_MODULES = \
+ install-autoconf \
+ install-bfd \
+ install-binutils \
+ install-byacc \
+ install-cvs \
+ install-dejagnu \
+ install-diff \
+ install-etc \
+ install-fileutils \
+ install-find \
+ install-flex \
+ install-gas \
+ install-gawk \
+ install-gdb \
+ install-glob \
+ install-gprof \
+ install-grep \
+ install-gzip \
+ install-hello \
+ install-indent \
+ install-ispell \
+ install-ld \
+ install-libiberty \
+ install-m4 \
+ install-make \
+ install-mmalloc \
+ install-opcodes \
+ install-patch \
+ install-prms \
+ install-rcs \
+ install-readline \
+ install-recode \
+ install-sed \
+ install-send-pr \
+ install-shellutils \
+ install-sim \
+ install-tar \
+ install-tcl \
+ install-texinfo \
+ install-textutils \
+ install-tgas \
+ install-time \
+ install-uudecode \
+ install-wdiff
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(X11_FLAGS_TO_PASS).
+ALL_X11_MODULES = \
+ all-emacs \
+ all-expect \
+ all-tclX \
+ all-tk
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(X11_FLAGS_TO_PASS).
+CHECK_X11_MODULES = \
+ check-emacs \
+ check-expect \
+ check-tclX \
+ check-tk
+
+# This is a list of the install targets for all the modules which are
+# compiled using $(X11_FLAGS_TO_PASS).
+INSTALL_X11_MODULES = \
+ install-emacs \
+ install-expect \
+ install-tclX \
+ install-tk
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(TARGET_FLAGS_TO_PASS).
+ALL_TARGET_MODULES = \
+ $(start-sanitize-chill) \
+ all-chillrt \
+ $(end-sanitize-chill) \
+ all-libg++ \
+ all-newlib \
+ all-xiberty
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(TARGET_FLAGS_TO_PASS).
+CHECK_TARGET_MODULES = \
+ $(start-sanitize-chill) \
+ check-chillrt \
+ $(end-sanitize-chill) \
+ check-libg++ \
+ check-newlib \
+ check-xiberty
+
+# This is a list of the install targets for all of the modules which are
+# compiled using $(TARGET_FLAGS_TO_PASS).
+INSTALL_TARGET_MODULES = \
+ $(start-sanitize-chill) \
+ install-chillrt \
+ $(end-sanitize-chill) \
+ install-libg++ \
+ install-newlib \
+ install-xiberty
+
+# This is a shell case of all modules which are compiled using
+# $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
+TARGET_LIBS = libg++ | newlib | xiberty
+# start-sanitize-chill
+TARGET_LIBS = chillrt | libg++ | newlib | xiberty
+# end-sanitize-chill
+
+# The first rule in the file had better be this one. Don't put any above it.
+all: $(ALL)
+.PHONY: all
+
+# The target built for a native build.
+.PHONY: all.normal
+all.normal: \
+ $(ALL_MODULES) \
+ $(ALL_TARGET_MODULES) \
+ $(ALL_X11_MODULES) \
+ all-gcc
+
+# The target built for a cross build.
+.PHONY: all.cross
+all.cross: \
+ all-bfd \
+ all-binutils \
+ all-byacc \
+ all-dejagnu \
+ all-flex \
+ all-gas \
+ all-gcc \
+ all-gdb \
+ all-ld \
+ all-libiberty \
+ all-mmalloc \
+ all-opcodes \
+ all-readline \
+ all-sim \
+ $(ALL_TARGET_MODULES)
+
+# Do a target for all the subdirectories. A ``make do-X'' will do a
+# ``make X'' in all subdirectories (because, in general, there is a
+# dependency (below) of X upon do-X, a ``make X'' will also do this,
+# but it may do additional work as well).
+# This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
+# because it is so large that it can easily overflow the command line
+# length limit on some systems.
+DO_X = \
+ do-clean \
+ do-distclean \
+ do-dvi \
+ do-info \
+ do-install-info \
+ do-installcheck \
+ do-mostlyclean \
+ do-realclean
+.PHONY: $(DO_X)
+$(DO_X):
+ @target=`echo $@ | sed -e 's/^do-//'`; \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ for i in $(SUBDIRS); do \
+ if [ -f ./$$i/Makefile ]; then \
+ case $$i in \
+ $(TARGET_LIBS) ) \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ ;; \
+ gcc) \
+ for flag in $(EXTRA_GCC_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ ;; \
+ *) \
+ for flag in $(EXTRA_HOST_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ ;; \
+ esac ; \
+ export AR AS CC CXX NM RANLIB XTRAFLAGS; \
+ if (cd ./$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" "XTRAFLAGS=$${XTRAFLAGS}" \
+ $${target}); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+
+# Here are the targets which correspond to the do-X targets.
+
+.PHONY: info installcheck dvi install-info
+.PHONY: clean distclean mostlyclean realclean local-clean local-distclean
+info: do-info
+installcheck: do-installcheck
+dvi: do-dvi
+
+install-info: do-install-info dir.info
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ if [ -f dir.info ] ; then \
+ $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
+ else true ; fi
+
+local-clean:
+ -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
+
+local-distclean:
+ -rm -f Makefile config.status
+
+clean: do-clean local-clean
+mostlyclean: do-mostlyclean local-clean
+distclean: do-distclean local-clean local-distclean
+realclean: do-realclean local-clean local-distclean
+
+# Check target.
+
+.PHONY: check
+check: $(CHECK_MODULES) \
+ $(CHECK_TARGET_MODULES) \
+ $(CHECK_X11_MODULES) \
+ check-gcc
+
+# Installation targets.
+
+.PHONY: install uninstall vault-install
+install: $(INSTALL_TARGET)
+
+uninstall:
+ @echo "the uninstall target is not supported in this tree"
+
+vault-install:
+ @if [ -f ./release/vault-install ] ; then \
+ ./release/vault-install $(host_alias) $(target_alias) ; \
+ else \
+ true ; \
+ fi
+
+.PHONY: install.all
+install.all: install-no-fixedincludes
+ @if [ -f ./gcc/Makefile ] ; then \
+ rootme=`pwd` ; export rootme ; \
+ (cd ./gcc; \
+ $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
+ else \
+ true ; \
+ fi
+
+# install-no-fixedincludes is used because Cygnus can not distribute
+# the fixed header files.
+.PHONY: install-no-fixedincludes
+install-no-fixedincludes: \
+ install-dirs \
+ $(INSTALL_MODULES) \
+ $(INSTALL_TARGET_MODULES) \
+ $(INSTALL_X11_MODULES) \
+ gcc-no-fixedincludes
+
+# Install the gcc headers files, but not the fixed include files,
+# which Cygnus is not allowed to distribute. This rule is very
+# dependent on the workings of the gcc Makefile.in.
+.PHONY: gcc-no-fixedincludes
+gcc-no-fixedincludes:
+ @if [ -f ./gcc/Makefile ]; then \
+ rm -rf gcc/tmp-include; \
+ mv gcc/include gcc/tmp-include 2>/dev/null; \
+ mkdir gcc/include; \
+ cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
+ touch gcc/stmp-fixinc; \
+ rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd` ; export srcroot; \
+ (cd ./gcc; \
+ $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ rm -rf gcc/include; \
+ mv gcc/tmp-include gcc/include 2>/dev/null; \
+ else true; fi
+
+.PHONY: install.cross
+install.cross: \
+ install-dirs \
+ install-binutils \
+ install-byacc \
+ install-dejagnu \
+ install-etc \
+ install-flex \
+ install-gas \
+ install-gcc \
+ install-gdb \
+ install-glob \
+ install-ld \
+ install-libiberty \
+ install-mmalloc \
+ install-opcodes \
+ install-readline \
+ $(INSTALL_TARGET_MODULES)
+
+# This rule is used to build the modules which use FLAGS_TO_PASS. To
+# build a target all-X means to cd to X and make all.
+# all-glob is handled specially because it doesn't actually build.
+.PHONY: $(ALL_MODULES) all-glob
+$(ALL_MODULES) all-glob:
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to check the modules which use FLAGS_TO_PASS. To
+# build a target check-X means to cd to X and make all.
+.PHONY: $(CHECK_MODULES)
+$(CHECK_MODULES):
+ @dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(INSTALL_MODULES)
+$(INSTALL_MODULES): install-dirs
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
+# To build a target all-X means to cd to X and make all.
+.PHONY: $(ALL_TARGET_MODULES)
+$(ALL_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(CHECK_TARGET_MODULES)
+$(CHECK_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use
+# TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
+# and make install.
+.PHONY: $(INSTALL_TARGET_MODULES)
+$(INSTALL_TARGET_MODULES): install-dirs
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# This rule is used to build the modules which use X11_FLAGS_TO_PASS.
+# To build a target all-X means to cd to X and make all.
+.PHONY: $(ALL_X11_MODULES)
+$(ALL_X11_MODULES):
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; \
+ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to check the modules which use X11_FLAGS_TO_PASS.
+# To build a target check-X means to cd to X and make all.
+.PHONY: $(CHECK_X11_MODULES)
+$(CHECK_X11_MODULES):
+ @dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; \
+ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use X11_FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(INSTALL_X11_MODULES)
+$(INSTALL_X11_MODULES):
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; \
+ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# gcc is the only module which uses GCC_FLAGS_TO_PASS.
+.PHONY: all-gcc
+all-gcc:
+ @if [ -f ./gcc/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-gcc
+check-gcc:
+ @if [ -f ./gcc/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi
+
+.PHONY: install-gcc
+install-gcc:
+ @if [ -f ./gcc/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# This is a list of inter-dependencies among modules.
+all-autoconf:
+all-bfd:
+all-binutils: all-libiberty all-opcodes all-bfd all-flex
+all-byacc:
+# start-sanitize-chill
+all-chillrt: all-binutils all-gas all-gcc all-newlib
+# end-sanitize-chill
+all-cvs:
+all-dejagnu:
+all-diff: all-libiberty
+all-emacs:
+all-etc:
+all-expect: all-tcl all-tk
+all-fileutils: all-libiberty
+all-find:
+all-flex: all-libiberty all-byacc
+all-gas: all-libiberty all-opcodes all-bfd
+all-gawk:
+all-gcc: all-libiberty all-byacc all-binutils all-gas
+all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim
+all-glob:
+all-gprof: all-libiberty all-bfd
+all-grep:
+all-gzip: all-libiberty
+all-hello: all-libiberty
+all-indent:
+all-ispell: all-emacs
+all-ld: all-libiberty all-bfd all-byacc all-flex
+all-libg++: all-gas all-ld all-gcc all-xiberty all-newlib
+all-libiberty:
+all-m4: all-libiberty
+all-make: all-libiberty
+all-mmalloc:
+all-newlib: all-binutils all-gas all-gcc
+all-opcodes: all-bfd
+all-patch:
+all-prms:
+all-rcs:
+all-readline:
+all-recode: all-libiberty
+all-sed:
+all-send-pr:
+all-shellutils:
+all-sim: all-libiberty all-bfd
+all-tar: all-libiberty
+all-tcl:
+all-tclX: all-tcl all-tk
+all-tk: all-tcl
+all-texinfo: all-libiberty
+all-textutils:
+all-tgas: all-libiberty all-bfd
+all-time:
+all-wdiff:
+all-uudecode: all-libiberty
+all-xiberty: all-gcc all-newlib
+
+### other supporting targets
+
+MAKEDIRS= \
+ $(prefix) \
+ $(exec_prefix) \
+ $(tooldir)
+
+.PHONY: install-dirs
+install-dirs:
+ @for i in $(MAKEDIRS) ; do \
+ echo Making $$i... ; \
+ parent=`echo $$i|sed -e 's@/[^/]*$$@@'`; \
+ if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \
+ if [ ! -d $$i ] ; then \
+ if mkdir $$i ; then \
+ true ; \
+ else \
+ exit 1 ; \
+ fi ; \
+ else \
+ true ; \
+ fi ; \
+ done
+
+
+dir.info: do-install-info
+ if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
+ $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
+ mv -f dir.info.new dir.info ; \
+ else true ; \
+ fi
+
+dist:
+ @echo "Building a full distribution of this tree isn't done"
+ @echo "via 'make dist'. Check out the etc/ subdirectory"
projects / binutils.git / blobdiff