-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
host_triplet = @host@
target_triplet = @target@
bin_PROGRAMS = gprof$(EXEEXT)
-DIST_COMMON = $(srcdir)/../config.guess $(srcdir)/../config.sub README \
- ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/configure $(am__configure_deps) \
- $(srcdir)/gconfig.in $(srcdir)/../mkinstalldirs \
- $(top_srcdir)/po/Make-in $(srcdir)/../ltmain.sh \
- $(srcdir)/../config.guess $(srcdir)/../config.sub \
- $(gprof_TEXINFOS) $(noinst_HEADERS)
subdir = .
+DIST_COMMON = README ChangeLog $(srcdir)/Makefile.in \
+ $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(srcdir)/gconfig.in \
+ $(srcdir)/../mkinstalldirs $(top_srcdir)/po/Make-in \
+ $(srcdir)/../depcomp $(gprof_TEXINFOS) $(noinst_HEADERS)
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../bfd/warning.m4 \
$(top_srcdir)/../config/depstand.m4 \
- $(top_srcdir)/../config/extensions.m4 \
$(top_srcdir)/../config/gettext-sister.m4 \
+ $(top_srcdir)/../config/largefile.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/nls.m4 \
$(top_srcdir)/../config/override.m4 \
+ $(top_srcdir)/../config/plugins.m4 \
$(top_srcdir)/../config/po.m4 \
- $(top_srcdir)/../config/proginstall.m4 \
$(top_srcdir)/../config/progtest.m4 \
$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
+ configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = gconfig.h
CONFIG_CLEAN_FILES = po/Makefile.in
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" \
+ "$(DESTDIR)$(man1dir)"
PROGRAMS = $(bin_PROGRAMS)
am__objects_1 = basic_blocks.$(OBJEXT) call_graph.$(OBJEXT) \
cg_arcs.$(OBJEXT) cg_dfn.$(OBJEXT) cg_print.$(OBJEXT) \
bsd_callg_bl.$(OBJEXT) fsf_callg_bl.$(OBJEXT)
gprof_OBJECTS = $(am_gprof_OBJECTS)
am__DEPENDENCIES_1 =
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
-depcomp =
-am__depfiles_maybe =
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/../depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
SOURCES = $(gprof_SOURCES)
INFO_DEPS = gprof.info
-TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
-am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
+am__TEXINFO_TEX_DIR = $(srcdir)/$(top_srcdir)/../texinfo
DVIS = gprof.dvi
PDFS = gprof.pdf
PSS = gprof.ps
DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
- install-exec-recursive install-info-recursive \
- install-recursive installcheck-recursive installdirs-recursive \
- pdf-recursive ps-recursive uninstall-info-recursive \
- uninstall-recursive
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(man_MANS)
HEADERS = $(noinst_HEADERS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GENCAT = @GENCAT@
-GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
-GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
INCINTL = @INCINTL@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
XGETTEXT = @XGETTEXT@
-ac_ct_AR = @ac_ct_AR@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
-ac_ct_DSYMUTIL = @ac_ct_DSYMUTIL@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_LIPO = @ac_ct_LIPO@
-ac_ct_NMEDIT = @ac_ct_NMEDIT@
-ac_ct_OBJDUMP = @ac_ct_OBJDUMP@
-ac_ct_OTOOL = @ac_ct_OTOOL@
-ac_ct_OTOOL64 = @ac_ct_OTOOL64@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
+builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
+dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
+localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
-AUTOMAKE_OPTIONS = cygnus
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = 1.11 foreign no-dist no-texinfo.tex
ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
+TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
SUFFIXES = .m
SUBDIRS = po
BASEDIR = $(srcdir)/..
BFDDIR = $(BASEDIR)/bfd
INCDIR = $(BASEDIR)/include
AM_CFLAGS = $(WARN_CFLAGS)
-MKDEP = gcc -MM
-INCLUDES = -DDEBUG -I../bfd -I$(srcdir)/../include \
+AM_CPPFLAGS = -DDEBUG -I../bfd -I$(srcdir)/../include \
-I$(srcdir)/../bfd @INCINTL@ -I. \
-DLOCALEDIR="\"$(datadir)/locale\""
BUILT_SOURCES = flat_bl.c bsd_callg_bl.c fsf_callg_bl.c
EXTRA_DIST = $(BUILT_SOURCES) bbconv.pl $(man_MANS)
+
+# We extract version from bfd/configure.in, make sure to rerun configure
+# when BFD's version changes.
+CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
POTFILES = $(sources) $(noinst_HEADERS)
MANCONF = -Dman
TEXI2POD = perl $(srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
man_MANS = gprof.1
AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-CLEANFILES = dep.sed DEP DEPA DEP1 DEP2
MAINTAINERCLEANFILES = gprof.info
# Automake 1.9 will only build info files in the objdir if they are
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
- cd $(srcdir) && $(AUTOMAKE) --foreign \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(srcdir) && $(AUTOCONF)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
gconfig.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
+ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/gconfig.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status gconfig.h
$(srcdir)/gconfig.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_srcdir) && $(AUTOHEADER)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
cd $(top_builddir) && $(SHELL) ./config.status $@
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
- test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
- else :; fi; \
- done
+ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
- rm -f "$(DESTDIR)$(bindir)/$$f"; \
- done
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
clean-binPROGRAMS:
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
+ @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
gprof$(EXEEXT): $(gprof_OBJECTS) $(gprof_DEPENDENCIES)
@rm -f gprof$(EXEEXT)
- $(LINK) $(gprof_LDFLAGS) $(gprof_OBJECTS) $(gprof_LDADD) $(LIBS)
+ $(LINK) $(gprof_OBJECTS) $(gprof_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alpha.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/basic_blocks.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bsd_callg_bl.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/call_graph.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cg_arcs.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cg_dfn.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cg_print.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/corefile.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flat_bl.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fsf_callg_bl.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gmon_io.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gprof.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hertz.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hist.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/i386.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mips.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/search_list.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/source.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sparc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sym_ids.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/symtab.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tahoe.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vax.Po@am__quote@
+
.c.o:
- $(COMPILE) -c $<
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
- $(COMPILE) -c `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
- $(LTCOMPILE) -c -o $@ $<
+@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
-rm -rf .libs _libs
distclean-libtool:
- -rm -f libtool
+ -rm -f libtool config.lt
gprof.info: gprof.texi $(gprof_TEXINFOS)
restore=: && backupdir="$(am__leading_dot)am$$$$" && \
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) -o $@ $<
+uninstall-dvi-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
+ rm -f "$(DESTDIR)$(dvidir)/$$f"; \
+ done
+
+uninstall-html-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
+ rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
+ done
+
uninstall-info-am:
@$(PRE_UNINSTALL)
- @if (install-info --version && \
+ @if test -d '$(DESTDIR)$(infodir)' && \
+ (install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
- install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+ if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+ then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
- (if cd "$(DESTDIR)$(infodir)"; then \
+ (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
+uninstall-pdf-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
+ done
+
+uninstall-ps-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(PSS)'; test -n "$(psdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(psdir)/$$f"; \
+ done
+
dist-info: $(INFO_DEPS)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
$(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
- for file in $$d/$$base*; do \
- relfile=`expr "$$file" : "$$d/\(.*\)"`; \
- test -f $(distdir)/$$relfile || \
- cp -p $$file $(distdir)/$$relfile; \
+ base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
+ for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
+ if test -f $$file; then \
+ relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+ test -f "$(distdir)/$$relfile" || \
+ cp -p $$file "$(distdir)/$$relfile"; \
+ else :; fi; \
done; \
done
mostlyclean-aminfo:
-rm -rf gprof.aux gprof.cp gprof.cps gprof.fn gprof.fns gprof.ky gprof.kys \
gprof.log gprof.pg gprof.pgs gprof.tmp gprof.toc gprof.tp \
- gprof.tps gprof.vr gprof.vrs gprof.dvi gprof.pdf gprof.ps \
- gprof.html
+ gprof.tps gprof.vr gprof.vrs
+
+clean-aminfo:
+ -test -z "gprof.dvi gprof.pdf gprof.ps gprof.html" \
+ || rm -rf gprof.dvi gprof.pdf gprof.ps gprof.html
maintainer-clean-aminfo:
@list='$(INFO_DEPS)'; for i in $$list; do \
echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
-
-clean-info: mostlyclean-aminfo
-install-man1: $(man1_MANS) $(man_MANS)
+install-man1: $(man_MANS)
@$(NORMAL_INSTALL)
- test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
+ test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ { for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
- done
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
uninstall-man1:
@$(NORMAL_UNINSTALL)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
- done
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ test -z "$$files" || { \
+ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
else \
local_target="$$target"; \
fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @failcom='exit 1'; \
+$(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
else \
local_target="$$target"; \
fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) gconfig.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) gconfig.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) gconfig.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
list='$(SOURCES) $(HEADERS) gconfig.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-check-am:
+check-am: all-am
check: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) check-recursive
-all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS) gconfig.h
+all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(MANS) $(HEADERS) gconfig.h
installdirs: installdirs-recursive
installdirs-am:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-recursive
mostlyclean-generic:
clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive
-clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+clean-am: clean-aminfo clean-binPROGRAMS clean-generic clean-libtool \
+ mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-hdr distclean-libtool distclean-tags
info-am: $(INFO_DEPS)
-install-data-am: install-data-local install-man
+install-data-am: install-info-am install-man
+
+install-dvi: install-dvi-recursive
+install-dvi-am: $(DVIS)
+ @$(NORMAL_INSTALL)
+ test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
+ @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
+ done
install-exec-am: install-binPROGRAMS
+install-html: install-html-recursive
+
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+ @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ $(am__strip_dir) \
+ if test -d "$$d$$p"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+ else \
+ list2="$$list2 $$d$$p"; \
+ fi; \
+ done; \
+ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+ done; }
install-info: install-info-recursive
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
- test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
+ test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; \
+ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
- $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
+ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
- relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
- echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
- $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
+ echo "$$ifile"; \
else : ; fi; \
done; \
- done
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
@$(POST_INSTALL)
@if (install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
- list='$(INFO_DEPS)'; \
+ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
else : ; fi
install-man: install-man1
+install-pdf: install-pdf-recursive
+
+install-pdf-am: $(PDFS)
+ @$(NORMAL_INSTALL)
+ test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
+install-ps: install-ps-recursive
+
+install-ps-am: $(PSS)
+ @$(NORMAL_INSTALL)
+ test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
+ @list='$(PSS)'; test -n "$(psdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
+ -rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
maintainer-clean-generic
ps-am: $(PSS)
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-info: uninstall-info-recursive
+uninstall-am: uninstall-binPROGRAMS uninstall-dvi-am uninstall-html-am \
+ uninstall-info-am uninstall-man uninstall-pdf-am \
+ uninstall-ps-am
uninstall-man: uninstall-man1
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
- check-am clean clean-binPROGRAMS clean-generic clean-info \
- clean-libtool clean-recursive ctags ctags-recursive dist-info \
- distclean distclean-compile distclean-generic distclean-hdr \
- distclean-libtool distclean-recursive distclean-tags dvi \
- dvi-am html html-am info info-am install install-am \
- install-binPROGRAMS install-data install-data-am \
- install-data-local install-exec install-exec-am install-info \
- install-info-am install-man install-man1 install-strip \
- installcheck installcheck-am installdirs installdirs-am \
- maintainer-clean maintainer-clean-aminfo \
- maintainer-clean-generic maintainer-clean-recursive \
- mostlyclean mostlyclean-aminfo mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \
- pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
- uninstall-binPROGRAMS uninstall-info-am uninstall-man \
- uninstall-man1
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
+ ctags-recursive install install-am install-strip \
+ tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am am--refresh check check-am clean clean-aminfo \
+ clean-binPROGRAMS clean-generic clean-libtool ctags \
+ ctags-recursive dist-info distclean distclean-compile \
+ distclean-generic distclean-hdr distclean-libtool \
+ distclean-tags dvi dvi-am html html-am info info-am install \
+ install-am install-binPROGRAMS install-data install-data-am \
+ install-dvi install-dvi-am install-exec install-exec-am \
+ install-html install-html-am install-info install-info-am \
+ install-man install-man1 install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs installdirs-am maintainer-clean \
+ maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
+ mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+ uninstall uninstall-am uninstall-binPROGRAMS uninstall-dvi-am \
+ uninstall-html-am uninstall-info-am uninstall-man \
+ uninstall-man1 uninstall-pdf-am uninstall-ps-am
diststuff: $(BUILT_SOURCES) info $(man_MANS)
rm -f gprof.pod
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf: install-pdf-recursive install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(pdf__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-install-pdf-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html: install-html-recursive install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
- f=$(html__strip_dir) \
- if test -d "$$d$$p"; then \
- echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
- else \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
- fi; \
- done
-
-install-html-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-# We want install to imply install-info as per GNU standards, despite the
-# cygnus option.
-install-data-local: install-info
-
-# Targets to rebuild dependencies in this Makefile.
-# Have to get rid of DEP1 here so that "$?" later includes all sources.
-DEP: dep.sed $(gprof_SOURCES) $(noinst_HEADERS) gconfig.h
- rm -f DEP1
- $(MAKE) MKDEP="$(MKDEP)" DEP1
- echo '# IF YOU PUT ANYTHING HERE IT WILL GO AWAY' >> DEP1
- if grep ' /' DEP1 > /dev/null 2> /dev/null; then \
- echo 'make DEP failed!'; exit 1; \
- else \
- mv -f DEP1 $@; \
- fi
-
-DEP1: $(gprof_SOURCES)
- echo '# DO NOT DELETE THIS LINE -- mkdep uses it.' > DEP2
- echo '# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.' >> DEP2
- for f in $?; do \
- $(MKDEP) $(INCLUDES) $(CFLAGS) $$f > DEPA; \
- sed -n -e '1s/: .*/: \\/p' -e q < DEPA >> DEP2; \
- sed -e '1s/.*: //' -f dep.sed < DEPA | \
- LC_ALL=C sort | LC_ALL=C uniq | \
- sed -e 's/^[AB]/ /' -e '$$s/ \\$$//' >> DEP2; \
- done
- rm -f DEPA
- mv -f DEP2 $@
-
-dep.sed: dep-in.sed config.status
- objdir=`pwd`; \
- sed <$(srcdir)/dep-in.sed >dep.sed \
- -e 's!@INCDIR@!$(INCDIR)!' \
- -e 's!@BFDDIR@!$(BFDDIR)!' \
- -e 's!@SRCDIR@!$(srcdir)!' \
- -e "s!@OBJDIR@!$${objdir}!" \
- -e 's!@TOPDIR@!'`echo $(srcdir) | sed -e s,/gprof$$,,`'!'
-
-dep: DEP
- sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < Makefile > tmp-Makefile
- cat DEP >> tmp-Makefile
- $(SHELL) $(srcdir)/../move-if-change tmp-Makefile Makefile
-
-dep-in: DEP
- sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.in > tmp-Makefile.in
- cat DEP >> tmp-Makefile.in
- $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.in $(srcdir)/Makefile.in
-
-dep-am: DEP
- sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.am > tmp-Makefile.am
- cat DEP >> tmp-Makefile.am
- $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.am $(srcdir)/Makefile.am
-
-.PHONY: dep dep-in dep-am
-
-# DO NOT DELETE THIS LINE -- mkdep uses it.
-# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.
-basic_blocks.o: \
- basic_blocks.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/libiberty.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- basic_blocks.h \
- corefile.h \
- gconfig.h \
- gmon_io.h \
- gmon_out.h \
- gprof.h \
- search_list.h \
- source.h \
- sym_ids.h \
- symtab.h
-call_graph.o: \
- call_graph.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- call_graph.h \
- cg_arcs.h \
- corefile.h \
- gconfig.h \
- gmon_io.h \
- gmon_out.h \
- gprof.h \
- search_list.h \
- source.h \
- sym_ids.h \
- symtab.h
-cg_arcs.o: \
- cg_arcs.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/libiberty.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- call_graph.h \
- cg_arcs.h \
- cg_dfn.h \
- cg_print.h \
- gconfig.h \
- gprof.h \
- search_list.h \
- source.h \
- sym_ids.h \
- symtab.h \
- utils.h
-cg_dfn.o: \
- cg_dfn.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/libiberty.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- cg_arcs.h \
- cg_dfn.h \
- gconfig.h \
- gprof.h \
- search_list.h \
- source.h \
- symtab.h \
- utils.h
-cg_print.o: \
- cg_print.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/libiberty.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- cg_arcs.h \
- cg_print.h \
- corefile.h \
- gconfig.h \
- gprof.h \
- hist.h \
- search_list.h \
- source.h \
- symtab.h \
- utils.h
-corefile.o: \
- corefile.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/libiberty.h \
- $(INCDIR)/safe-ctype.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- corefile.h \
- gconfig.h \
- gprof.h \
- hist.h \
- search_list.h \
- source.h \
- symtab.h
-gmon_io.o: \
- gmon_io.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/binary-io.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/libiberty.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- basic_blocks.h \
- call_graph.h \
- cg_arcs.h \
- corefile.h \
- gconfig.h \
- gmon.h \
- gmon_io.h \
- gmon_out.h \
- gprof.h \
- hertz.h \
- hist.h \
- search_list.h \
- source.h \
- symtab.h
-gprof.o: \
- gprof.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/demangle.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/libiberty.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/bfdver.h \
- ../bfd/config.h \
- basic_blocks.h \
- call_graph.h \
- cg_arcs.h \
- cg_print.h \
- corefile.h \
- gconfig.h \
- gmon_io.h \
- gprof.h \
- hertz.h \
- hist.h \
- search_list.h \
- source.h \
- sym_ids.h \
- symtab.h
-hertz.o: \
- hertz.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- gconfig.h \
- gprof.h \
- hertz.h
-hist.o: \
- hist.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/libiberty.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- corefile.h \
- gconfig.h \
- gmon_io.h \
- gmon_out.h \
- gprof.h \
- hist.h \
- search_list.h \
- source.h \
- sym_ids.h \
- symtab.h \
- utils.h
-source.o: \
- source.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/libiberty.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- gconfig.h \
- gprof.h \
- search_list.h \
- source.h
-search_list.o: \
- search_list.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/libiberty.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- gconfig.h \
- gprof.h \
- search_list.h
-symtab.o: \
- symtab.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- cg_arcs.h \
- corefile.h \
- gconfig.h \
- gprof.h \
- search_list.h \
- source.h \
- symtab.h
-sym_ids.o: \
- sym_ids.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/libiberty.h \
- $(INCDIR)/safe-ctype.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- cg_arcs.h \
- corefile.h \
- gconfig.h \
- gprof.h \
- search_list.h \
- source.h \
- sym_ids.h \
- symtab.h
-utils.o: \
- utils.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/demangle.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/libiberty.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- cg_arcs.h \
- corefile.h \
- gconfig.h \
- gprof.h \
- search_list.h \
- source.h \
- symtab.h \
- utils.h
-i386.o: \
- i386.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- cg_arcs.h \
- corefile.h \
- gconfig.h \
- gprof.h \
- hist.h \
- search_list.h \
- source.h \
- symtab.h
-alpha.o: \
- alpha.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- cg_arcs.h \
- corefile.h \
- gconfig.h \
- gprof.h \
- hist.h \
- search_list.h \
- source.h \
- symtab.h
-vax.o: \
- vax.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- cg_arcs.h \
- corefile.h \
- gconfig.h \
- gprof.h \
- hist.h \
- search_list.h \
- source.h \
- symtab.h
-tahoe.o: \
- tahoe.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- cg_arcs.h \
- corefile.h \
- gconfig.h \
- gprof.h \
- hist.h \
- search_list.h \
- source.h \
- symtab.h
-sparc.o: \
- sparc.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- cg_arcs.h \
- corefile.h \
- gconfig.h \
- gprof.h \
- hist.h \
- search_list.h \
- source.h \
- symtab.h
-mips.o: \
- mips.c \
- $(BFDDIR)/sysdep.h \
- $(INCDIR)/ansidecl.h \
- $(INCDIR)/filenames.h \
- $(INCDIR)/fopen-same.h \
- $(INCDIR)/symcat.h \
- ../bfd/bfd.h \
- ../bfd/config.h \
- cg_arcs.h \
- corefile.h \
- gconfig.h \
- gprof.h \
- hist.h \
- search_list.h \
- source.h \
- symtab.h
-flat_bl.o: \
- flat_bl.c \
- $(INCDIR)/ansidecl.h
-bsd_callg_bl.o: \
- bsd_callg_bl.c \
- $(INCDIR)/ansidecl.h
-fsf_callg_bl.o: \
- fsf_callg_bl.c \
- $(INCDIR)/ansidecl.h
-# IF YOU PUT ANYTHING HERE IT WILL GO AWAY
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
projects / binutils.git / blobdiff