+
+ * infrun.c (wait_for_inferior): When we hit a breakpoint for the
+ wrong thread, make sure to write the fixed PC value into the thread
+ that stopped. Restart all threads after single stepping over a
+ breakpoint for a different thread.
+ * breakpoint.c (set_momentary_breakpoint): Make momentary
+ breakpoints thread specific in a multi-threaded program.
+ * lynx-nat.c (child_resume): Add some comments. Correctly
+ choose between the single and multi-threaded step and continue
+ ptrace calls.
+
+
+ * config/h8300/h8300.mt: Renamed from h8300hms.mt.
+ * config/h8500/h8500.mt: Renamed from h8500hms.mt.
+ * config/z8k/z8k.mt: Renamed from z8ksim.mt.
+ * configure, configure.in: Update to reflect renamings.
+
+ * remote-sim.c (sim): New command, passes commands to simulator.
+ (simulator_command): New function.
+ (gdbsim_ops): Clean up.
+ * remote-sim.h (sim_do_command): Declare.
+ * sh-tdep.c (memory_size): Remove command.
+
+ * Makefile.in (SIM, SIM_OBS): New variables.
+ (CLIBS, CDEPS): Add value of SIM.
+ (DEPFILES): Add value of SIM_OBS
+
+ * config/arm/arm.mt, config/h8300/h8300.mt, config/h8500/h8500.mt,
+ config/sh/sh.mt, config/sparc/sp64sim.mt, config/w65/w65.mt,
+ config/z8k/z8k.mt: Remove simulator files from TDEPFILES,
+ define in SIM_OBS and SIM.
+ config/sparc/sp64sim.mt (SIMFILES): Remove.
+
+ * remote-z8k.c: Remove, was superseded by remote-sim.c
+ * Makefile.in, mpw-make.in: Remove references to remote-z8k.c.
+
+
+ * remote.c (remote_read_bytes, remote_write_bytes): Second arg
+ should be char *, not unsigned char *.
+ * dcache.h (memxferfunc): Ditto.
+ * monitor.c (monitor_write_memory, monitor_read_memory_single):
+ Ditto.
+ (monitor_make_srec): Let compiler figure size of hextab.
+
+
+ * lynx-nat.c (child_wait): Don't restart new threads and loop
+ to the top of child_wait; let the machine independent code in
+ wait_for_inferior deal with new thread notifications.
+
+
+ * remote-nindy (nindy_load): Put in target specific load, it's
+ 20 times faster.
+
+
+ * utils.c (error): Move local `args' outside conditional,
+ move local `string1' inside, declare function as void if
+ non-ANSI compiler, dereference error_hook when calling.
+
+ * mac-xdep.c (stdarg.h): Don't include.
+
+
+ * remote-nindy.c (nindy_wait): Change timeout in SERIAL_READCHAR.
+
+
+ * hppam3-nat.c: Change HP800_THREAD_STATE to TRACE_FLAVOR and
+ HP800_THREAD_STATE_COUNT to TRACE_FLAVOR_SIZE.
+
+
+ * monitor.c: Turn on caching.
+ (monitor_printf): If a ^C was sent, don't expect to see its
+ echo.
+ (monitor_open): Enable caching.
+ (monitor_resume, monitor_load): Flush cache.
+ (monitor_xfer_memory): Call cache routine.
+ (monitor_dump_regs): New.
+ (monitor_fetch_registers): If monitor_dump_regs available
+ then use it.
+ (monitor_load): Don't ref exec_bfd if it's NULL.
+ (monitor_load_srec): Use new monitor_make_srec calling convention.
+ (monitor_make_srec): Rewrite to cope with two, three and four byte
+ addresses.
+ * remote-hms.c (hms_cmds): Initialze end-of-command delim.
+ * dcache.h, dcache.h: Rewritten.
+ * remote.c: Reenable caching.
+ (getpkt): Reduce MAX_TRIES to 3.
+ (remote_xfer_memory): Use dcache_xfer_memory.
+ * defs.h (error_hook): New.
+ * top.c (error_hook): New definition.
+ * utils.c (error): Use error_hook if initialized.
+ * sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
+ HAVE_SOCKETS in place of #ifndef GO32.
+
+
+ * config/pa/tm-hppa.h (PSW_*): Define processor status word masks.
+ (INSTRUCTION_NULLIFIED): Allow specific targets to override.
+ * config/pa/tm-hppao.h (INSTRUCTION_NULLIFIED): Define to work
+ around losing mach kernel behavior.
+
+
+ * monitor.c (monitor_wait): Don't use the watchdog timeout
+ if its value is 0.
+ * w89k-rom.c (w89k_open): Define to be static.
+
+start-sanitize-gdbtk
+
+ * gdbtk.c: Add functions Tcl_Malloc, Tcl_Realloc, and Tcl_Free.
+
+ * gdbtk.tcl (add_breakpoint_frame): Add more fields.
+ * (create_file_win create_asm_win build_framework): Create null
+ bindings for meta keys to keep window from dropping down to
+ insertion point when meta is pressed by itself. New bindings:
+ Up/Down - Scroll up/down one line at a time
+ Next/Prior - Scroll up/down one page at a time
+ Home/End - Warp to current pc/end of file
+ * (build_framework): Turn on breakpoint menu.
+ * (create_command_window): Implement tab completion. Add binding
+ for ^C to stop target.
+end-sanitize-gdbtk
+
+
+ * somsolib.c (som_solib_add): Validate regexp argument.
+ Don't assume the first entry on dld's library list is the main
+ program. Don't load the same library more than once and don't
+ consider the main program a shared library.
+ (som_solib_sharedlibrary_command): New function
+ (_initialize_som_solib): Add "sharedlibrary" command.
+
+
+ * array-rom.c: Remove, no longer used.
+
+ * remote-hms.c (hms_open): Make static.
+
+ * mpw-config.in (MacSerial.h): Copy from version in {CIncludes},
+ not {MPW}Interfaces:CIncludes.
+ * ser-mac.c (mac_baud_rate_table): Fix value for 38400 baud.
+
+
+ * ch-exp.y: Remove lots of unsupported productions and names.
+ Add support for IF-expressions, ORIF, ANDIF, NUM, and ADDR.
+
+
+ * parser-defs.h (enum precedence): Added PREC_BUILTIN_FUNCTION.
+ * expression.h (enum exp_opcode): Added UNOP_LOWER, UNOP_UPPER,
+ UNUP_LENGTH.
+ * expprint.c (dump_expression): Handle the new exp_opcodes.
+ (print_subexp): Handle PREC_BUILTIN_FUNCTION.
+ (print_simple_m2_func): Removed.
+ (print_subexp): Remove support for Modula2 builtin functions.
+ * m2-lang.c (m2_op_print_tab): Add support for builtin functions.
+ * ch-exp.y: Parse LOWER, UPPER, and LENGTH builtins.
+ (write_lower_upper_value): Convenience function for LOWER and UPPER.
+ (upper_lower_argument, length_argument): Removed non-terminals.
+ * ch-lang.c (chill_op_print_tab): Entries for UPPER, LOWER, LENGTH.
+ (type_lower_upper): New function. Calculate LOWER/UPPER of type.
+ (value_chill_length): New function. Calcalate LENGTH of ARRAY/STRING.
+ (evaluate_subexp_chill): Handle UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH.
+
+
+ * defs.h: Don't declare strchr and friends if WIN32.
+ (DIRNAME_SEPARATOR): Move here from source.c.
+ (SLASH_P, SLASH_CHAR, SLASH_STRING, ROOTED_P): New macros,
+ symbolic definitions for filename bits.
+ * top.c (cd_command): Use these.
+ * source.c (mod_path, openp): Ditto.
+ * terminal.h: Disable termio/sgtty definitions if WIN32.
+ * findvar.c (registers_changed): Call registers_changed_hook
+ if it is defined.
+
+
+ * Makefile.in (distclean, realclean): Remove config.cache and
+ config.log.
+
+
+ * somsolib.c: Include gdb-stabs.h.
+ (som_solib_section_offsets): Use SECT_OFF_XXX rather than 0, 1,
+ etc. Initialize offsets for RODATA & BSS too.
+
+
+ * hppa-tdep.c (frame_chain): Try to compensate for incomplete
+ register information in core files when backtracing.
+
+
+ * remote-nrom.c: Remove everything but download code. More
+ cleanups.
+
+
+ * defs.h maint.c monitor.c remote-mips.c remote.c: Add support
+ for `watchdog' variable. This allows the user to put an upper
+ limit on the amount of time that GDB will wait for the target to
+ return from a step or continue operation. This will primarily be
+ used for the testsuite, where it is difficult to come up with a
+ reasonable timeout for things like function calls, which can take
+ as long as three minutes under some circumstances. If the
+ watchdog timer expires, GDB will generate an error that looks like
+ `Watchdog has expired.', and will detach from the target.
+
+ * remote-mips.c (mips_open): Setup initial frame from target.
+ Print it out so that user is told where the program is stopped
+ when they attach.
+
+ * remote-nrom.c: Loads of cleanups. Use serial code to open
+ network connections. Use expect() to wait for response to
+ download command.
+
+ * ser-tcp.c (tcp_open): Retry connection if we get ECONNREFUSED.
+
+ * serial.c serial.h (serial_open serial_fdopen serial_close):
+ Allow users to open the same device multiple times. They all get
+ to share the same serial_t. This is about the only way to have
+ multiple active targets use the same device (for download and
+ debug).
+
+ * sparcl-tdep.c: Keep #include <unistd.h> away from GO32.
+
+ * target.c: Add `targetdebug' variable. If this is non-zero,
+ then a special target is put at the top of the target stack which
+ will cause all calls through the target vector to have their args
+ and results printed out.
+
+
+ * ch-exp.y: Handle <primitive_value> "->" <modename>.
+
+
+ * mem-break.c (LITTLE_BREAKPOINT): If BREAKPOINT and
+ {LITTLE,BIG}_BREAKPOINT are all defined, don't redefine.
+ (BIG_BREAKPOINT): Ditto.
+
+ * config/rs6000/tm-rs6000.h (BREAKPOINT): Define as either
+ BIG_BREAKPOINT or LITTLE_BREAKPOINT depending on the target byte
+ order.
+
+
+ * somsolib.c (som_solib_section_offsets): Handle relative pathnames.
+
+ * hppa-tdep.c (frame_saved_pc): Handle backtracing through signal
+ handler in dynamically linked executables.
+
+
+ * rs6000-tdep.c (single_step): Handle both little and big endian
+ breakpoints.
+ (gdb_print_insn_powerpc): Deal with disassembling both little and
+ big endian PowerPC systems.
+ (_initialize_rs6000_tdep): Use gdb_print_insn_powerpc to handle
+ disassembly, rather that assuming big endian order.
+
+ * config/rs6000/tm-rs6000.h (BREAKPOINT): Delete.
+ (BIG_BREAKPOINT): Define, big endian breakpoint instruction.
+ (LITTLE_BREAKPOINT): Define, little endian breakpoint instruction.
+
+
+ * README: Add note about Unixware 2.x.
+
+ * dbxread.c (process_one_symbol): Check for exact symbol name
+ match when fixing up N_GSYM and N_STSYM symbols from Sun acc.
+
+ * valprint.c (value_print_array_elements): Use
+ fprintf_filtered to put out `<repeats %u times>',
+
+ * value.h (struct value): Change `repetitions' field from
+ `short' to `int' type.
+
+start-sanitize-arc
+
+ * arc-tdep.c (arc_bfd_mach_type): New static global.
+ (codestream_fill): Handle byte order differences.
+ (setup_prologue_scan): Don't read stdarg function's "sub sp,sp,N".
+ (arc_get_frame_setup): Read it here.
+ (arc_frame_saved_pc): And here.
+ (arc_print_insn): New function.
+ (arc_set_cpu_type): Set arc_bfd_mach_type. Don't set tm_print_insn.
+ (_initialize_arc_tdep): Set tm_print_insn to arc_print_insn.
+end-sanitize-arc
+
+
+ * nlm/{configure.in, Makefile.in}: Converted to use autoconf.
+ * nlm/configure: New file, generated with autoconf 2.3.
+
+ * nlm/configure.in: Use sed instead of awk to get the value of
+ cpufile. Awk is not a utility required by the GNU coding
+ standards. This change also fixes the rigid whitespace
+ requirements that were required for awk.
+
+ * sparclite/aload.c: Use a file descriptor instead of a stdio
+ stream for i/o with target board.
+ Use #error if HAVE_TERMIOS is not defined.
+
+ * sparclite/{Makefile.in, configure.in}: Converted to use
+ autoconf.
+ * sparclite/configure: New file, generated with autoconf 2.3.
+
+
+ * defs.h: Include either varargs.h or stdarg.h (for va_list).
+ Fix stupid thinko in last change ("..." -> "va_list").
+
+ * defs.h (vprintf_filtered declaration): Add PARAMS prototype;
+ gcc-2.5 chokes on format attributes for unprototyped functions.
+ (vfprintf_filtered declaration): Likewise.
+ (vprintf_unfiltered declaration): Likewise.
+ (vfprintf_unfiltered). Likewise.
+
+
+ * configure.in: Use sed instead of awk to get the values of
+ hostfile, targetfile and nativefile. Awk is not a utility
+ required by the GNU coding standards. This change also
+ fixes the rigid whitespace requirements that were required
+ for awk.
+ * configure: regenerated.
+
+
+ * sparclite/{Makefile,configure}.in: Add hooks for building with
+ -lsocket & -lnsl for solaris2. Don't build aload/eload for DOS.
+
+
+ * gdbserver/remote-utils.c (prepare_resume_reply): Add FIXME
+ comment regarding signal numbering.
+
+
+ * arm-tdep.c (_initialize_arm_tdep): Use print_insn_little_arm
+ now.
+
+ * arm-tdep.c (convert_from_extended, convert_to_extended):
+ New.
+ * coffread.c (enter_linenos): Return if linetab 0.
+ * config/arm/arm.mt (TDEPFILES): Add simulator support.
+ * config/arm/tm-arm.h (FRAME_FIND_SAVED_REGS): Fix prototypes.
+
+
+ * config/idt.mt: replace monitor and array-rom with the new
+ remote-array.
+
+
+ * remote-nindy.c: Install Kung patch for PR 6820. I have no idea
+ what this does...
+
+ * breakpoint.c: Move defaults of watchpoint related macros into
+ target.h.
+ * target.h: Macros from breakpoint.c. Conditionalize based on
+ TARGET_HAS_HARDWARE_WATCHPOINTS.
+ * i386v-nat.c procfs.c: Use TARGET_HAS_HARDWARE_WATCHPOINTS
+ instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint
+ code.
+ * config/i386/nm-linux.h, config/mips/nm-irix4.h,
+ config/pa/nm-hppab.h, config/sparc/tm-sparclite.h: #define
+ TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code.
+
+
+ * breakpoint.c, target.h: Move defaults of watchpoint related
+ macros back to breakpoint.c. Required to get GDB compiling
+ on Solaris again.
+
+
+ * defs.h (ATTR_FORMAT): New macro, expands to gcc's format
+ attribute when compiled by gcc.
+ * defs.h, language.h, monitor.h: Changed many function
+ declarations to use ATTR_FORMAT.
+
+ * breakpoint.c (delete_command); source.c (directory_command);
+ top.c (define_command): Changed call to query() that had too
+ many arguments.
+ * printcmd.c (address_info): Changed call to printf_filtered()
+ that had too many arguments.
+
+
+ * infrun.c (wait_for_inferior): Move assignments to stop_signal
+ and stop_pc, and STOPPED_BY_WATCHPOINT code, back where they
+ were--after the switch statement on w.kind. You can't read the
+ registers of an inferior which has exited. Use a goto in the
+ STOPPED_BY_WATCHPOINT code.
+ * infrun.c (wait_for_inferior): Reinstate
+ HAVE_STEPPABLE_WATCHPOINT and HAVE_CONTINUABLE_WATCHPOINT code.
+
+
+ * utils.c, complaints.c, language.c, monitor.c, remote-array.c,
+ remote-mips.c, remote-os9k.c, remote-st.c: Conditionalize use of
+ stdarg rather than varargs on ANSI_PROTOTYPES not __STDC__; it
+ must match the definition of PARAMS.
+start-sanitize-gdbtk
+ * gdbtk.c: Likewise.
+end-sanitize-gdbtk
+
+
+ * utils.c (fprintf_filtered, fprintf_unfiltered, fprintfi_filtered,
+ printf_filtered, printf_unfiltered, printfi_filtered, query, warning,
+ error, fatal, fatal_dump_core): Use stdarg.h macros when compiling
+ with an ANSI compiler.
+ * complaints.c (complain): Likewise.
+ * language.c (type_error, range_error): Likewise.
+ * monitor.c (monitor_printf, monitor_printf_noecho): Likewise.
+ * remote-array.c (printf_monitor, debuglogs): Likewise.
+ * remote-mips.c (mips_error): Likewise.
+ * remote-os9k.c (printf_monitor): Likewise.
+ * remote-st.c (printf_stdebug): Likewise.
+start-sanitize-gdbtk
+ * gdbtk.c (gdbtk_query): Likewise.
+end-sanitize-gdbtk
+
+ * defs.h, complaints.h, language.h, monitor.h: Add prototypes to
+ match above changes.
+
+ * printcmd.c: Remove uneeded #include <varargs.h>.
+ * remote-e7000.c: Likewise.
+
+ * f-typeprint.c (f_type_print_base): Fix typo found by above
+ changes.
+
+
+ * Makefile.in (xcoffread.o): Depend on partial-stab.h.
+
+ * xcoffsolib.c (sharedlibrary_command): New command.
+ * xcoffsolib.c (solib_info): Call xcoff_relocate_symtab.
+ * xcoffsolib.c: Miscellaneous cleanups.
+
+ * partial-stab.h: Ignore symbol descriptor '-' (for local
+ variables with negative type numbers) without complaint.
+
+ * rs6000-nat.c (vmap_ldinfo): Use bfd_stat rather than our own
+ local emulation thereof. Remove unused variable ostart.
+
+
+ * Makefile.in (config.status): changed target so that
+ config.status --recheck is executed if configure script changes.
+
+ * monitor.c (monitor_printf): Changed format specification in
+ error message to work with pre-ansi compilers.
+ (monitor_load_srec): reduced length of s-records from 128 to 32
+ bytes so download is more reliable with the rom68k monitor.
+
+ * rom68k-rom.c: Added trailing space to prompt string.
+
+ * config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
+ * config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
+ Removed.
+ * defs.h, config/{xm-lynx.h, xm-nbsd.h},
+ config/i386/{xm-i386bsd.h, xm-linux.h},
+ config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
+ config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
+ (PSIGNAL_IN_SIGNAL_H): Removed.
+
+
+ * Makefile.in (Makefile): Added config.status to dependency list.
+
+ * configure.in: Added INIT-CMDS argument to AC_OUTPUT which sets
+ gdb_host_cpu, gdb_target_cpu and nativefile.
+ * configure: regenerated.
+
+
+ * mdebugread.c (parse_symbol): Do not relocate stBlock/scText
+ symbols, their value is the displacement from the procedure address.
+ * top.c (init_main): Add missing newlines to help strings for
+ `if' and `while' commands, fix help string for `show commands'.
+
+
+ * breakpoint.c: Move defaults of watchpoint related macros into
+ target.h. Use BP_TEMPFLAG and BP_HARDWAREFLAG instead of
+ constants.
+ * infrun.c (wait_for_inferior): Enhance comment near
+ STOPPED_BY_WATCHPOINT.
+ * target.h: Macros from breakpoint.c.
+
+
+ * config/i386/{i386sol2.mh, i386v4.mh, ncr3000.mh},
+ config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh,
+ mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured
+ out by autoconf.
+ * config/apollo68v.mh (RANLIB): Removed, figured out by autoconf.
+
+ * Makefile.in, configure.in: Converted to use autoconf
+ * aclocal.m4: New file, local autoconf macro definitions.
+ * configure: New file, generated with autoconf 2.3.
+
+
+ * remote.c (remote_kill): Add prototype.
+ * cpu32bug-rom.c (cpu32bug_open): Properly define as static.
+ * config/h8300/h8300hms.mt (TDEPFILES): Add monitor.o.
+
+
+ * sparclite/salib.c (win_ovf win_unf): Make window size constant
+ into a variable (__WINSIZE) so that it can be controlled via the
+ .h file.
+ * sparclite/sparclite.h: Add SL933 #ifdef to set __WINSIZE to 6
+ for the 933 board.
+
+ * infrun.c: Add #ifdef HP_OS_BUG to all references to
+ trap_expected_after_continue.
+ * (wait_for_inferior): Fix for remote watchpoints. Don't try to
+ insert breakpoints while target is running (this only works on
+ *some* native targets). This may also speed up native watchpoints
+ considerably.
+
+
+ * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc),
+ mdebugread.c (struct symloc), hpread.c (struct symloc),
+ xcoffread.c (struct symloc): Fix inaccurate comment introduced
+ 20 Apr 1995.
+
+
+ * rs6000-tdep.c (find_toc_address): Revise comment.
+ * symfile.c, symfile.h (init_psymbol_list): New function;
+ consolidate duplicated copies from os9kread.c, dbxread.c
+ and dwarfread.c.
+ * defs.h: Declare info_verbose.
+ * xcoffread.c: Extensive changes to support psymtabs.
+
+
+ * cpu32bug-rom.c remote-est.c rom68k-rom.c: Update line_term element.
+
+
+ * partial-stab.h: Expand comments.
+
+
+ * Support debugging using native MACH primitives on hppa*-*-osf*.
+ * configure.in: hppa*-*-osf* != hppa*-*-bsd* anymore.
+ * config/pa/hppaosf.mh: New file.
+ * config/pa/nm-hppao.h: Likewise.
+ * hppam3-nat.c: Likewise.
+ * config/pa/tm-hppao.h (PSW_SS): Define for single-stepping.
+ (MACHINE_CPROC_*_OFFSET): Define.
+ (TRACE_*): Define.
+ (START_INFERIOR_TRAPS_EXPECTED): Delete definition.
+
+
+ * hppa-tdep.c (read_unwind_info): Cosmetic cleanup.
+ * (unwind_command): Clean it up and make it print things out
+ nicer.
+ * monitor.c: Add ^C handling capability (mostly ripped off from
+ remote.c).
+ * (monitor_printf): Make it check the command echo.
+ * (monitor_printf_noecho): Similar to above, but doesn't check
+ for echo.
+ * (monitor_stop): No longer waits for prompt. That is the job of
+ the caller. This makes things work much better for monitor_wait,
+ which waits for the prompt itself.
+ * (monitor_open): Deal with new monitor_stop semantics. Also,
+ flush input after sending init strings to get rid of junk that may
+ be output. Also, don't always send \r to remote. Use
+ monitor_ops->line_term cuz proper character isn't always \r.
+ * (monitor_fetch_register): Switch to completely different
+ algorithm to deal with lame-ass monitors which put spaces in the
+ middle of numbers, and prompt with a space!!!!!
+ * (monitor_read_memory_single): New routine to be used with
+ monitors that can only return one byte/short/long at a time. This
+ is selected via MO_GETMEM_READ_SINGLE.
+ * (monitor_load_srec): Use monitor_printf_noecho for sending S
+ records. Most targets don't echo them.
+ * (monitor.h): Get rid of cmd_delim. Add line_delim.
+ * op50n-rom.c (op50n_cmds): Fill it up. Make it work.
+ * w89k-rom.c: Change all eols from \r to \n. Change load_resp to
+ ^Q to prevent error message.
+ * config/pa/tm-hppa.h (CALL_DUMMY (for hppro)): Add special
+ instruction sequence at end to make restore_pc_queue happy.
+
+
+ * remote-est.c (est_open): Make static to match prototype.
+
+
+ * configure.in: Add little endian PowerPC support.
+ * config/powerpc/ppcle-eabi.mt: New file for little endian PowerPC
+ support.
+ * config/powerpc/tm-ppcle-eabi.h: ditto.
+
+
+ * nlm/configure.in (gdb_host, gdb_host_cpu, gdb_target): Removed.
+ These variables not used.
+
+ * config/m68k/monitor.mt (TDEPFILES): Added cpu32bug-rom.o.
+
+
+ * monitor.c (monitor_command): Don't use PROMPT until monitor
+ target is known to be open.
+ (monitor_make_srec): Don't define size of hextab.
+
+
+ * configure.in (--enable-netrom): New configuration option.
+ * Makefile.in (REMOTE_OBS): Rename from REMOTE_O, append
+ value of NETROM_OBS.
+ (NETROM_OBS): New variable.
+ * remote-nrom.c: New file, NetROM target support.
+ * config/a29k/a29k-udi.mt, config/i960/vxworks960.mt: Use
+ REMOTE_OBS instead of REMOTE_O.
+start-sanitize-arc
+ * config/arc/arc.mt: Ditto.
+end-sanitize-arc
+
+
+ * array-rom.c (_initialize_array array_open): Move baud_rate
+ initialization from _initxxx to array_open to fix bug with
+ overriding -b command line option.
+
+
+ * Makefile.in (RUNTEST): Fix reference of `srcdir'.
+
+
+ * remote-hms.c: Rewrite to use new monitor conventions.
+
+
+ * dbxread.c: Add comment explaining lowest_text_address.
+ Add comment regarding stringtab_global and psymtabs.
+
+
+ * config/pa/tm-hppa.h (EXTRACT_STRUCT_VALUE_ADDRESS): Fix.
+
+ * config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Rewrite to correctly
+ handle "short", "int" and small structures returned in registers.
+
+
+ * minsyms.c: add new function lookup_minimal_symbol_text, to look
+ for text symbol only.
+ * breakpoint.c (create_longjmp_breakpoint): call
+ lookup_minimal_symbol_text instead of lookup_minimal_symbol.
+ * symtab.h: add lookup_minimal_symbol_text prototype.
+
* sh-tdep.c (sh-opc.h): Don't include.
* config/pa/tm-hppa.h: Define lots register offsets needed by
w89k-rom.c.
+
* Makefile.in (X11_INCLUDES): Define as empty.
projects / binutils.git / blobdiff