+
+ * ldexp.c, ldfile.c, ldlang.c, lexsup.c, ldmain.c, ldemul.c:
+ Remove inital caps in some error messages, change "can't" to
+ "cannot", add missing colons.
+ * ldmisc.c (vfinfo): Print "%%" as a single %.
+ For '%' followed by unrecognized character, print them both
+ verbatim instead of expecting a char * arg.
+ For '%C', don't put the function name in parens.
+
+ * ldexp.c (invalid): Pass "%%", not "% ".
+
+
+ * scripttempl/mips.sc: Always define _ftext, _fdata, _fbss.
+ (BSS_VAR): Removed; now always define _fbss.
+ * emulparams/mipsidt.sh, emulparams/mipsidtl.sh (BSS_VAR):
+ Removed.
+
+
+ * configure.in: z8k-coff is the same as z8k-sim
+
+
+ * testsuite/lib/ld.exp: new file
+ * testsuite/config/unix-ld.exp: new file
+ * testsuite/ld.bootstrap/bootstrap.exp: new file
+ * Makefile.in: add dejagnu support for make check
+
+
+ * ldlex.l (comment): Add missing newline in message.
+ * ldindr.c (add_indirect): Ditto.
+ * ldexp.c (exp_fold_tree): Ditto.
+
+
+ * ldgram.y, ldlex.l, mri.c, ldwrite.c: Change multiple commons
+ into externs.
+
+ * ldmisc.c (multiple_warn): New function.
+ * ldmisc.h: Declare it.
+ * ldmain.c (enter_global_ref): Call it.
+ * ld.h (ld_config_type): Add warn_common.
+ * ldlex.l, ldgram.y: Set it with -warn-common option.
+ * ldver.c (help): Document it.
+
+
+ * scripttempl/elf.sc: Add hooks for .sdata, .sbss, and
+ target-specific sections, and for changing data section vma.
+
+
+ * ldgram.y (OPTION_Qy, OPTION_Y, OPTION_dn, OPTION_YP): New
+ terminals, for Solaris.
+ (dirlist_ptr): New static variable.
+ (command_line_option): Accept new options.
+
+ * ldlex.l: Accept command-line options "-Qy", "-dn", "-Y", and
+ "-YP,...".
+
+ * config/sun4sol2.mt: Pass emulation name without ".sh".
+
+ * emulparams/elf32_sparc.c: Renamed from elf32-sparc.c.
+ * config/sun4sol2.mt (em_elf32_sparc.c): Adjusted accordingly.
+
+
+ * scripttempl/elf.sc: Add support for .init, .fini, .ctors,
+ .dtors, .data1, .rodata1 sections, instead of combining them into
+ other sections. For `-r', set all section start addresses to
+ zero.
+
+ * emulparams/elf32-sparc.sh (TEXT_START_ADDR,
+ NONPAGED_TEXT_START_ADDR): Value should be 0x10100.
+ (MAXPAGESIZE): Renamed from PAGE_SIZE.
+
+
+ * genscripts.sh: If this is the default emulation, set
+ COMPILE_IN.
+ * emultempl/*.em: Use it to determine whether to compile in the
+ scripts.
+
+ * Makefile.in (GENSCRIPTS): Pass the default emulation name to
+ genscripts.sh. Pass the current emulation name without ".sh" on
+ the end.
+ * genscripts.sh: Take an default emulation arg.
+ Use the current emulation name as EMULATION_NAME.
+ Make default lib path for cross-compiling ':', not null.
+ * emulparams/*.sh: Don't set EMULATION_NAME.
+ * ldemul.c (ldemul_get_script): Take isfile arg.
+ Pass it to emulation's get_script function.
+ * ldemul.h: Adjust get_script prototypes.
+ * ldfile.c (ldfile_find_command_file): Renamed from find_a_name.
+ No longer static.
+ * ldfile.h: Declare it.
+ * ldgram.y: Accept a script on the command line again,
+ for parsing compiled-in scripts.
+ * ldmain.c (main): If ld script is a file, parse it as a -T
+ option, otherwise parse it directly.
+ * emultempl/*.em (*get_script): Return the scripts themselves if
+ this is the default emulation; otherwise return their file names.
+ * emultempl/m88kbcs.em: New file, to take m88kbcs #ifdef out of
+ generic.em.
+ * emulparams/m88kbcs.sh: Use it.
+
+ * ld.h (ld_config_type::unix_relocate): Remove unused element.
+
+
+ * Makefile.in (ALL_EMULATIONS): Delete em_i386linux.o (for which
+ there's no change log entry yet, tsk tsk) from the list of
+ emulations compiled in until Mark gets around to checking in
+ emulparams/i386linux.sh.
+ (ldemul-list.h): Depend on Makefile, so if EMULATION_OFILES is
+ changed, this file gets updated.
+
+
+ * ldgram.y (OPTION_Lfile): New token.
+ (command_line_option): Accept OPTION_L NAME (whitespace after -L).
+ * ldlex.l (<COMMAND>): Accept -L without FILENAME.
+
+
+ * configure.in: h8/300h support needs own .mt file.
+ config/coff-h8300h.mt: New file.
+
+
+ * ldmain.c: Don't include sys/stat.h; it already got included
+ somewhere along the way.
+
+
+ * Makefile.in: Add h8300h support.
+ emulparams/h8300h.sh: New file.
+ scripttempl/h8300h.sc: New file.
+
+
+ * ldfile.c (ldfile_open_file): In error message, use the name the
+ user gave (e.g., "-lc"), rather than the base file name.
+
+ * ldexp.c (exp_fold_tree): Don't assign an int to an enum.
+
+ * ldmain.[ch]: Remove initial Q_ from function names.
+ * ldexp.c, ldindr.c, ldlang.c: Change callers.
+
+ * ldfile.c, ldmain.c, ldgram.y: Rename option_v to trace_file_tries.
+
+ * ldlang.c (lang_process): Move loading of default script from
+ here to main. Add a "/" to start of script name to prevent
+ finding it in "." first.
+
+ * ldmain.c (set_scripts_dir): Don't look in "." first.
+
+ * ldgram.y, ldlang.c, ldsym.c: Remove traces of unused var
+ option_longmap.
+
+
+ * Makefile.in (em_m88kbcs.c): Correct dependency.
+ * scripttempl/m88kbcs.sc: It's ARCH, not arch. Removed TARGET
+ statement. Changed OUTPUT_FORMAT to use ${OUTPUT_FORMAT}.
+ * emulparams/m88kbcs.sh: It's coff-m88kbcs, not m88kbcs.
+
+
+ * ldfile.c (ldlang_open_file, ldfile_open_command_file),
+ main.c (main): Print the errno string in the error message.
+
+
+ * configure.in: Accept h8300h for target cpu.
+
+ * ldmisc.c (vfinfo): Have demangle remove leading underscore if
+ present (demangle is smart enough to know whether to do it or not).
+
+
+ * ldmain.c (set_scripts_dir): Check . and <ld bin dir>/../lib for
+ ldscripts, as well as <ld bin dir> and SCRIPTDIR.
+
+ * ldlang.c (lang_process): Use sizeof instead of magic constant.
+
+ * ldmain.c (get_emulation, check_for_scripts_dir,
+ set_scripts_dir): New functions.
+ (main): Call them.
+
+
+ * scripttempl/elf.sc: Include .init, .fini, .rodata sections.
+ Create symbol "end" instead of "__end". Comment out some parts
+ that may not be needed (yet) for elf.
+
+ * configure.in: Accept sparc-elf and sparc-solaris2 configs.
+
+
+ * Makefile.in (ALL_EMULATIONS): Include $(OTHER_EMULATIONS).
+
+ * ldmisc.h (einfo, minfo, info): Don't bother with PARAMS macro
+ when no prototype is being supplied.
+ (ldmalloc, ldrealloc): Size argument is now size_t.
+
+ * ldmisc.c (finfo): New function, accepts FILE* argument.
+ (vfinfo, case 'v'): New format character; displays bfd_vma in hex
+ without leading zeros.
+ (vfinfo, cases 'R' and 'C'): Use finfo(%v) when displaying a
+ bfd_vma value, instead of fprintf(%x) which won't hold a long long
+ value.
+ (concat, buystring): String lengths are size_t.
+ (ldmalloc, ldrealloc, xrealloc): Size argument is now size_t.
+
+ * ldlang.c (new_statement): Size argument is now size_t. Added
+ forward declaration with prototype.
+
+
+ * ldgram.y (OPTION_v): Don't turn on verbose output.
+
+
+ * ldlex.l: Get rid of local typedef for bfd_vma! Get it from
+ bfd.h instead.
+
+
+ * Makefile.in (install): Don't install as $(tooldir)/bin/gld;
+ collect2 doesn't look for gld any more anyhow.
+
+
+ * ldlang.c (lang_relocate_globals): Skip indirect symbols, which
+ now have a non NULL srefs_chain.
+
+ * config/hp300hpux.mt: Use emulation hp3hpux rather than
+ hp300hpux, since the latter does not exist.
+
+
+ * genscripts.sh: Put the scripts in the ldscripts directory, not
+ emulations.
+ * configure.in (ldscripts): Make, instead of emulations.
+ * Makefile.in (scriptdir): Take off the "ld" part.
+ (install, clean, distclean): Use ldscripts, not emulations.
+ In tests, don't pass -Lemulations.
+ Don't pass tooldir/lib to genscripts.sh.
+ * genscripts.sh: Don't take tooldir/lib arg.
+ * ldlang.c (lang_process): Add "ldscripts/" to the name of the
+ default script file.
+
+
+ * scripttempl/h8300.sc: Add .tors section for constructor/destructors.
+
+
+ * config/coff-h8300.mt: EMUL=h8300hms -> h8300.
+
+
+ * Makefile.in (.y.c): skip default .y.c rules. gnu make can now
+ run in parallel without colliding on yacc's static file names.
+ Without the stub rule, make will try to start two yacc's
+ concurrently which fails because of yacc's static file names.
+
+
+ * ldmain.c (subfile_wanted_p): Don't dump core if there are no
+ symbols.
+
+
+ * genscripts.sh (LIB_PATH): Only add /usr/local/lib if it's
+ different from libdir.
+
+ * Makefile.in (scriptdir): Base on tooldir, not datadir.
+
+
+ * ldver.c (help): New function.
+ * ldver.h: Declare it.
+ * ldlex.l, ldgram.y: Recognize new options --help and --version.
+
+
+ * Makefile.in (INCLUDES): Don't need ../include any more.
+
+
+ * ldlex.l, ldgram.y: Support new -oformat option.
+ Remove attempt at supporting script fragments on the command line.
+ * ldlang.c (lang_add_output_format): Take new arg, FROM_SCRIPT.
+ * mri.c (mri_format), ldgram.y: Change callers.
+ * ldlang.h: Change prototype.
+
+
+ * Makefile.in: canonicalize install.sh; for use within
+ this directory (and subdirs)
+
+
+ * ldgram.y: Tweak grammar to make reporting of invalid options work.
+
+ * Makefile.in (.cc.o): Restore .SUFFIXES entry for .cc
+ and .cc.o rule.
+
+
+ * ldfile.c (ldfile_open_command): Don't try .ld extension.
+ It wasn't documented (or likely used) and wastes time.
+ (try_open): If EXTEN is empty, don't try it.
+
+ * ldctor.c, lderror.c, ldexp.c, ldfile.c, ldindr.c, ldlang.c,
+ ldlex.l, ldmain.c, ldmisc.c, ldsym.c, ldver.c, ldwarn.c,
+ ldwrite.c, lexsup.c, mri.c, relax.c: Replace DEFUN macro calls
+ with normal function declarations.
+
+ * Move *.em to emultempl/*.em. Move *.sh to emulparams/*.sh.
+ Move *.sc-sh to scripttempl/*.sc.
+ * {emultempl,emulparams,scripttempl}/README: New files.
+ * sh.em, st2000.em, z8ksim.em, h8300hms.em, h8500hms.em: Files
+ removed, replaced with generic.em.
+ * h8300.sh, h8500.sh, h8300.sc, h8500.sc: Renamed from
+ h8[35]00hms.s[ch]. Change their contents to omit the "hms".
+
+ * *.em (*_get_script): Return script name instead of script contents.
+ * ldlang.c (lang_process): Change caller.
+
+ * ldlex.l, ldgram.y: Recognize -m option.
+ Check for input files after *all* options in grammar.
+ * ldmain.c (main): Check for -m options. Add default directory
+ for -m.
+
+ * mkscript.c: File removed.
+ * genscripts.sh: Take two more parameters, tooldirlib and libdir,
+ to add to the default LIB_PATH.
+ Look for input files in the new subdirectories.
+ Create the scripts in emulations subdirectory and don't filter
+ them through mkscript.
+ * configure.in: Make the emulations subdirectory.
+
+ * Makefile.in: Account for all of the above changes.
+ Remove unused .SUFFIXES. Get libgcc.a path with gcc
+ -print-libgcc-file-name instead of $(libdir)/libgcc.a.
+ Put CFLAGS last in the compilation rules.
+ Add -I../bfd to INCLUDES so sysdep.h is found.
+
+
+ * Makefile.in (INCLUDES): Look in ../include, not ../bfd.
+
+ * aout.sc-sh: Add SHLIB_PATH like STACKZERO. Make STACKZERO
+ dependent on RELOCATING, not RELOCATION.
+ * hp3hpux.sh (SHLIB_PATH): Define it.
+
+
+ * ldfile.c (try_open): If opening without the extension fails,
+ try with the extension even if -v or -V was given.
+ had_script is imported (from ldgram.y), not exported.
+
+Mon Jun 14 16:26:10 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
+
+ * Makefile.in: remove parentdir support, use INSTALL_XFORM
+
+
+ * ldexp.c (exp_fold_tree): Don't lose the old flag bits.
+ * ldgram.y (statement_list_opt): New nonterminal, either empty or
+ statement_list.
+ (section): Use statement_list_opt, not statement_list.
+ * m68kcoff.sc-sh: Gather constructors and destructors and define
+ __CTOR_LIST__ and __DTOR_LIST__ appropriately.
+ * sa29200.sc-sh: Gather constructors and destructors and define
+ ___CTOR_LIST__ and ___DTOR_LIST__ appropriately.
+
+
+ * Makefile.in (INCLUDES): Add -I../bfd for sysdep.h and bfd.h.
+ * configure.in: No longer need to configure to get sysdep.h.
+
+Fri Jun 4 16:18:24 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * Makefile.in: remove install:all and install-info:info
+ dependencies (these cause some spurious rebuilds at 'make install'
+ time)
+
+
+ * configure.in (mips-idt-ecoffl*): New target; use mips-idtl.
+ (mips-idt-ecoff*): Added trailing '*'.
+ * config/mips-idtl.mt: New file; use EMUL of mipsidtl.
+ * mipsidtl.sh: New file; like mipsidt.sh, but little endian.
+ * Makefile.in (ALL_EMULATIONS): Added em_mipsidtl.o.
+
+ * config/sun3.mh (HOSTING_LIBS, HOSTING_EMU): Removed obsolete and
+ incorrect definitions.
+
+
+ * ldsym.c (write_file_locals): Write BSF_CONSTRUCTOR
+ symbols, unless stripping.
+
+
+ * Makefile.in: configure looks for ####, so remove lines with many
+ '#' characters.
+ * config/irix4.mh, config/i386v.mh: New files; set HOSTING_CRT0
+ and HOSTING_LIBS correctly so that ``make check'' will work.
+
+
+ * mips.sc-sh: Define _etext, _edata, and _end, in addition
+ to etext, edata, and end. Needed for IRIX 4.0.5F.
+
+ * Version 2.2.1 released.
+
+
+ * mipsbsd.sc-sh: Renamed from aout-mipsbsd.sc-sh.
+ * mipsbsd.sh (EMULATION_NAME): Use new file name.
+
+
+ * Makefile.in (LDDISTSTUFF): Remove ld.mm since we can't build it
+ properly right now.
+
+ * Version 2.2 released.
+
+
+ * ldver.c (ldversion): Bump version number to 2.2.
+
+
+ * NEWS: New file.
+
+
+ * mips.sc-sh: Don't define BSS_VAR unless relocating.
+
+
+ * Makefile.in (mkscript.o, mkscript): Build mkscript via
+ mkscript.o, rather than directly from mkscript.c.
+
+
+ * configure.in: Look for ${target_makefile_frag} relative to
+ ${srcdir}, not relative to build directory.
+
+ * hppaosf.em, hppaosf.sc-sh, hppaosf.sh: New files.
+ * configure.in: Recognize hppa*-hp-osf.
+ * Makefile.in (ALL_EMULATIONS): Include hppaosf emulation.
+ (em_hppaosf.c): Build it.
+ * config/hppaosf.mh, hppaosf.mt: New files.
+
+ * ld.h (ALIGN_N): Renamed from ALIGN, because that conflicted with
+ some system header files. All uses changed.
+
+ * configure.in: Recognize i386-aix configurations as i386-coff
+ targets.
+
+ * configure.in: Recognize m68*-*-hpux.
+ * aout.sc-sh: If STACKZERO and RELOCATING are both defined, output
+ the value of STACKZERO.
+ * Makefile.in (ALL_EMULATIONS): Include hp300-hpux emulation.
+ (em_hp3hpux.c): Build it.
+ * hp3hpux.sh, config/hp300hpux.mt: New files.
+
+
+ * mips.sc-sh: Put constructors in the .data section.
+ * Makefile.in (cdtest): Added dependency on ld.new.
+
+
+ * Makefile.in: Change definition of $(tooldir) to match FSF.
+ * vax.sh, config/vax.mt, configure.in, Makefile.in:
+ Support VAX Ultrix and BSD.
+
+
+ * sh.em, sh.sh, sh.sc-sh: New files supporting Hitachi SH.
+
+
+ * ldlang.h (struct memory_region): Change `length' and
+ `old_length' fields to bfd_size_type. Eliminate use of bfd_offset.
+ * ldlang.c, mri.c: Corresponding changes, plus lint.
+
+
+ * configure.in: For all i386 targets, accept i486 as well.
+
+
+ * ldlang.c (wild_doit): Preserve all flags for a
+ SEC_SHARED_LIBRARY section.
+ (size_input_section): Consider any SEC_HAS_CONTENTS section when
+ computing largest_section.
+
+
+ * ldlang.c (lang_output_section_statement_lookup): Initialize all
+ fields of newly created structure.
+
+
+ * ldmain.c (g_switch_value): New variable.
+ * ldgram.y (OPTION_G, OPTION_Gval): New tokens.
+ (command_line_option): Accept -G and set g_switch_value.
+ * ldlex.l (COMMAND): Accept -G.
+ * ldlang.c (open_output): Call bfd_set_gp_size on new BFD.
+
+
+ Support for linking and loading at different places:
+
+ * ldlex.l: Add "AT" keyword.
+ * ldgram.y: Cleanup, and parse AT.
+ * ldlang.c (print_output_section_statement): Print output address
+ of section in map. (lang_size_sections): Fill sections' lma with
+ load address.
+ * ldlang.h (lang_output_section_statement_type): Add load_base
+ information.
+
+ * ldindr.c (add_indirect): Keep more information in the alias
+ symbol chain.
+ * ldlang.c (wild_doit): Don't inherit NEVER_LOAD section
+ attribute from an input section.
+ * ldmain.c (Q_enter_file_symbols): Common section is NEVER_LOAD by
+ default. (Q_enter_file_symbos): Indirect symbols now are known by
+ their section, not a special symbol flag.
+ * ldsym.c (write_file_locals): Indirect symbols aren't local.
+ (write_file_globals): Write the mapping for an indirect symbol.
+ * relax.c (build_it): When forced to write a NEVER_LOAD section,
+ fill it with zeros.
+
+
+ * ld.texinfo: changes for q1
+
+Tue Mar 23 00:13:29 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * Makefile.in: add dvi target, define & use TEXI2DVI, add installcheck
+
+Mon Mar 8 20:30:35 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * Makefile.in: rename HOST_CC to CC_FOR_BUILD
+
+
+ * mips.sc-sh: Added variables which may be overridden by a
+ specific emulation.
+ * mipsidt.sh: New file; emulation for IDT MIPS board.
+ * Makefile.in (ALL_EMULATIONS): Added em_mipsidt.o.
+ (em_mipsidt.c): New target. Uses mipsidt.sh and mips.sc-sh.
+ * config/mips-idt.mt: New file; sets EMUL to mipsidt.
+ * configure.in (mips-idt-ecoff): New target; uses mips-idt.
+
+
+ * aout-mipsbsd.sc-sh, mipsbsd.sh: New files from Ralph Campbell,
+ * i386bsd.sh, config/i386bsd.mt: New files.
+ * configure.in, Makefile.in: Added support for mipsbsd and 386bsd.
+
+
+ * mri.c: Add extern declaration of strdup.
+ * ldsym.c (KEEP macro): Add spaces around '=' for the
+ sake of old (e.g. PCC) compilers.
+
+
+ * ldver.c: Bump to version 2.1.
+
+
+ * ldgram.y: allow section types without address expressions.
+ * ldlang.c (lang_relocate_globals): avoid possible hang with
+ undefined but unreferenced symbols.
+ * relax.c (relax_section): don't complain if the script file isn't
+ relaxable but -relax is set
+
+Thu Feb 18 17:58:45 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * configure.in: go32 is the 3rd part of the triple, not the 2nd
+
+
+ * mipsbig.sh: New file. Big endian MIPS emulation.
+ * config/mips-big.mt: New file. Use mipsbig emulation.
+ * configure.in (mips-sgi-irix*): Use target mips-big.
+ * Makefile.in (ALL_EMULATIONS): Added em_mipsbig.o.
+ (em_mipsbig.c): New target. Uses mipsbig.sh.
+
+
+ * mips.sc-sh: Put .scommon sections into .sbss section.
+
+ * ldmain.c (subfile_wanted_p): Preserve section of common symbols,
+ rather than always putting them in bfd_com_section.
+ * ldlang.c (lang_common): If a common symbol is not in
+ bfd_com_section, put in a section of the same name, rather than
+ always putting it in section COMMON.
+
+
+ * ldmain.c (subfile_wanted_p): If we already have a common
+ definition of a symbol, don't necessarily pull in an object file
+ that provides a non-common definition.
+
+ * ldlex.l (COMMAND): Accept -EB and -EL command line arguments,
+ returning OPTION_EB and OPTION_EL. gcc passes these to a MIPS
+ linker.
+ * ldgram.y (OPTION_EB, OPTION_EL): New tokens.
+ (command_line_option): Accept and ignore OPTION_EB and OPTION_EL.
+
+
+ * Makefile.in (install): Remove $(tooldir)/bin/gld before creating
+ the link to it.
+
+
+ * ldmain.c, ldsym.c: Use new bfd_is_com_section macro rather than
+ checking for equality to bfd_com_section.
+
+
+ * mips.sc-sh: New file. Ultrix, and hopefully other MIPS ECOFF
+ targets, linker script.
+ * mipslit.sh: New file. Little endian MIPS emulation.
+ * config/mips-lit.mt: New file. Use mipslit emulation.
+ * configure.in (mips-dec-ultrix*): Use target mips-lit.
+ * Makefile.in (ALL_EMULATIONS): Added em_mipslit.o.
+ (em_mipslit.c): New target. Uses mipslit.sh.
+
+
+ * Makefile.in (install): Install ld as both $(tooldir)/bin/ld and
+ $(tooldir)/bin/gld, so that gcc can find it with or without
+ collect2.
+
+
+ * ldwrite.c: Removed perform_relocation, copy_and_relocate, and
+ write_norel. All linking is now done via write_relax. Call
+ ldsym_write before calling write_relax.
+ * relax.c: Added copyright.
+ (write_relax): Renamed from write_relaxnorel. Added relocateable
+ argument. seclet_dump renamed to bfd_seclet_link.
+ * relax.h: Added copyright.
+
+
+ * ldmain.c (decode_library_subfile): Patch from
+
+Fri Jan 8 18:04:33 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * config/vxworks960.mt renamed to config/i960.mt
+
+ * configure.in: sparc-aout emulates a sun4, as does
+ sparc*-vxworks, i960-nindy uses gld960 emulation
+
+
+ Fix support for NOLOAD, add INCLUDE
+ * ldfile.c (ldfile_open_command_file): pass file name to
+ lex_push_file.
+ * ldlex.l, ldgram.y: tidy up, parse INCLUDE and NOLOAD
+ * ldlang.c (wild_doit): make output sections inherit NEVER_LOAD
+ attribute.
+
+Thu Jan 7 10:22:19 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * Makefile.in, config.h: no more default emulation. Make the lack
+ of emulation a compile time error
+
+Wed Jan 6 01:08:37 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * configure.in: recognise all sparclite variants, not just 'sparclite'
+
+
+ * m68kcoff.sc-sh: define _end as well as end, for consistency with
+ aout.sc-sh.
+
+ * configure.in: accept *-ericsson-ose for any m68k CPU.
+
+ * ldwrite.c (write_rel): don't always set SEC_HAS_CONTENTS flag
+ for each output section.
+
+
+ * ldexp.c, ldlang.c, ldmain.c, ldsym.c, ldwarn.c: Use new
+ macro bfd_asymbol_bfd as appropriate.
+ * Makefile.in: Un-duplicate ldlex.c dependency.
+ * condigure.in: Replace my_host case table by sourcing
+ ../bfd/configure.host. Allow std-host as the default.
+ * ldmisc.c: Change logic for C++ name demangling: There is
+ no initial '_' to remove from stab-derived function names.
+
+
+ * ldlang.c (lang_init_script_file): don't attach the output file
+ sections to the script file.
+
+ * ldlang.c (wild): run expansion loop over command line bfd too.
+ (lang_ini_script_file): initialize more parts of the command line
+ bfd.
+ * ldlex.l: fix DEFINED start states.
+
+ -y support
+ * ld.texinfo: new doc.
+ * ldgram.y, ldlex.l: understand -y<symbol>
+ * ldmain.c (Q_enter_file_symbols): if had -y, lookup symbol and
+ print info. (add_ysym): new function.
+ * ldsym.h: (ldsym_type): new define SYM_Y.
+
+
+ * ldctor.h, lderror.h, ldexp.h, ldfile.h, ldindr.h, ldlang.c,
+ ldlang.h, ldlex.h, ldmain.h, ldmisc.h, ldsym.h, ldver.h, ldwarn.h,
+ ldwrite.h, relax.h: Replace all uses of EXFUN and PROTO ansi-glue
+ macros with PARAMS. Recreational cleanup. Update copyrights.
+
+Tue Nov 10 00:23:37 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * Makefile.in: pass down the bfd source directory for includes
+
+
+ * ldlang.c (lang_size_sections): don't change size and address for
+ SEC_SHARED_LIBRARY sections rather than for SEC_NEVER_LOAD
+ sections.
+
+
+ * relax.c (build_it): re-enable the processing of data_statements
+ in scripts, makes counted contructor lists work again.
+
+
+ * ldemul.h: Remove uses of SDEF and PROTO macros (use PARAMS).
+
+
+ * m68kcoff.sc-sh: don't use initial underscores for etext, edata
+ and end.
+
+
+ * Support for i386-sysv.
+ configure.in: check for i386-*-sysv* and i386-*-sco*.
+ i386coff.sc-sh: rewrote to support SVR3 by default.
+ ldctor.c (find_constructors): preserve stat_ptr.
+ ldlang.c (wild_doit): initialize vma and size of new output
+ section to corresponding input section. This is required for
+ shared library support.
+ (lang_size_sections): don't modify vma and size of sections which
+ are never loaded (for shared libraries).
+ ldwrite.c (copy_and_relocate): copy the contents of any section
+ which has contents, not just sections which are loaded (for shared
+ libraries).
+
+
+ * ldlang.c (size_input_section): count the sizes of all sections
+ we allocate.
+
+
+ * ldmisc.c (demangle,vfinfo): use the new underscore in bfd to
+ to demangle symbols better
+
+
+ * ldlang.c (lang_finish): don't warn if -e start symbol does not
+ exist when linking with -r.
+
+
+ * aout.sc-sh, m68kcoff.sc-sh: set __bss_start to the start of the
+ .bss segment.
+
+
+ * ldmain.c (linear_library): don't even think about processing
+ an object file if it's already been done
+
+Thu Oct 1 23:14:59 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * configure.in: the hp9000/300 config file is now hp300
+
+
+ * config/z8ksim.mt: new file
+
+
+ * Makefile.in (ldexp.o, ldctor.o, ldlang.o, ldmain.o, ldwrite.o,
+ lexsup.o, mri.o, relax.o): Indicate dependence on ldgram.h.
+
+ * ld.h (strip_symbols_type): Add value STRIP_SOME.
+ * ldgram.y (OPTION_RETAIN_SYMBOLS_FILE): New terminal token.
+ * ldlang.c (lang_add_keepsyms_file): New function.
+ * ldlex.l: Handle "-retain-symbols-file".
+ * ldsym.c (keepsyms_file, kept_syms): New vars.
+ (process_keepsyms): New functihon; reads file, marks symbols for
+ saving.
+ (write_file_locals): File symbols should always be kept.
+ (ldsym_write): Warn about "-retain-symbols-file" overriding "-S"
+ and "-s". Process retain-symbols file before setting symtab.
+ * ldsym.h (SYM_KEEP): New flag for ldsym_type flags.
+ (keepsyms_file, kept_syms): Declare them.
+
+ * ldmain.c (main): Non-fatal errors should still cause non-zero
+ exit status even with -r.
+
+
+ Added initial support for the z8k
+ * z8ksim.em, z8ksim.sc-sh, z8ksim.sh: new files
+ * configure.in, Makefile.in: modified to reflect above
+
+ * ldlang.c (lang_check): when linking conflicting architectures,
+ make the output file reflect at least one of the bad inputs.
+
+
+ * Makefile.in (install): if $(tooldir) exists, install ld in
+ $(tooldir)/bin.
+
+
+ * Makefile.in, configure.in: modified to support i386-coff
+ * i386coff.sh: new file
+
+
+ * Makefile.in, m68kcoff.sh, m68kcoff.sc-sh, config/m68k-coff.mt:
+ added m68k-coff emulation mode, stolen from a29k emulation.
+ Almost certainly wrong, but perhaps better than sun3.
+
+
+ * Makefile.in, Makefile.dos, generic.em, genscripts.sh,
+ gld960.em, h8300hms.em, h8300xray.em, lnk960.em, st2000.em,
+ vanilla.em: Rename all (generated) ld__*.c files to em_.c.
+ This is one character shorter, and lets people build on
+ SVR3 system. (ld__h8300xray.[co] was the killer there;
+ h8300xray.sc-sh is also overlong, but seems harmless.)
+ Based on a patch from Jonathan Ryshpan <hitachi!amito!jon>.
+ * Makefile.in (clean): Fix typo mostclean -> mostlyclean.
+ * configure.in: Add host isc.
+
+ * ldver.c: Call it version 2.0.
+
+
+ * ldver.c: Bump to version 0.98.
+ * TODO: New file.
+
+ * Makefile.in: Added mostlyclean, distclean, realclean rules.
+
+
+ * ldmisc.c (xrealloc): New (needed by ../libiberty/cplus.dem.c).
+ * ldlex.l: Moved comment() to end, since some compilers
+ otherwise have problems with input() used before it is defined.
+
+Tue Sep 1 17:45:51 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * configure.in: added Solaris 2 and Irix 4 host support.
+
+Mon Aug 31 19:27:11 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * Makefile.in: remove -S flag from the FLEX definition
+
+ * configure.in: rewrote, using new style case statement. use
+ m68k.mt for m68k-aout systems
+
+
+ * Makefile.in: map "ld" through program_transform_name when
+ installing.
+
+
+ * cplus-dem.c: Removed. Use the version in libiberty now.
+ * ldmisc.c: Use new libiberty version of cplus_demangle().
+
* gld960.em (gld960_choose_target): default to little endian, not
projects / binutils.git / blobdiff