* gprof.c (VERSION): Define as "2.8.1".

[binutils.git] / ChangeLog

diff --git a/ChangeLog b/ChangeLog
index c36b3cec1064ec01922ec44c5a5966f6433f863e..acea3c23209601c7aba2d42a5db9ef94094d43ad 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,627 @@
+start-sanitize-tic80
+Sun Mar 30 12:38:27 1997  Fred Fish  <[email protected]>
+
+       * configure.in: Remove noconfigdirs case since gdb also
+       configures and builds for tic80-coff.
+
+end-sanitize-tic80
+Fri Mar 28 18:28:52 1997  Ian Lance Taylor  <[email protected]>
+
+       * configure: Set cache_file to config.cache.
+       * Makefile.in (local-distclean): Remove config.cache.
+
+Wed Mar 26 18:49:39 1997  Ian Lance Taylor  <[email protected]>
+
+       * COPYING: Update FSF address.
+
+start-sanitize-tic80
+Wed Mar 26 10:38:25 1997  Michael Meissner  <[email protected]>
+
+       * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
+       noconfigdirs.
+
+end-sanitize-tic80
+Mon Mar 24 15:02:39 1997  Ian Lance Taylor  <[email protected]>
+
+       * Makefile.in (install-dirs): Don't crash if prefix, and hence
+       MAKEDIRS, is empty.
+
+Mon Mar 24 12:40:55 1997  Doug Evans  <[email protected]>
+
+       * config.sub: Tweak mn10300 entry.
+
+Fri Mar 21 15:35:27 1997  Michael Meissner  <[email protected]>
+
+       * configure.in (host_tools): Put sim before gdb, so gdb's
+       configure.tgt can determine if the simulator was configured.
+
+Sun Mar 16 16:07:08 1997  Fred Fish  <[email protected]>
+
+       * config.sub: Move BeOS $os case to be with other Cygnus
+       local cases.
+
+Sun Mar 16 01:34:55 1997  Martin Hunt <[email protected]>
+
+       * config.sub: Remove misplaced comment that broke Linux.
+
+Sat Mar 15 22:50:15 1997  Fred Fish  <[email protected]>
+
+       * config.sub: Add BeOS support.
+
+Mon Mar 10 13:30:11 1997  Tom Tromey  <[email protected]>
+
+       * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
+
+Wed Mar  5 12:09:29 1997  Martin  <[email protected]>
+
+       * configure.in (noconfigdirs): Remove tcl and tk from
+       noconfigdirs for cygwin32 builds.
+
+start-sanitize-tic80
+Fri Feb 28 18:20:15 1997  Fred Fish  <[email protected]>
+
+       * configure.in (tic80-*-*): Remove ld from noconfigdirs.
+
+end-sanitize-tic80
+Thu Feb 27 14:57:26 1997  Ken Raeburn  <[email protected]>
+
+       * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
+       make-all.com, use makefile.vms instead.
+
+Tue Feb 25 18:46:14 1997  Stan Shebs  <[email protected]>
+
+       * config.sub: Accept -lnews*.
+
+start-sanitize-d30v
+Tue Feb 25 13:19:14 1997  Andrew Cagney  <[email protected]>
+
+       * configure.in (noconfigdirs): Disable target-newlib,
+       target-examples and target-libiberty for d30v.
+
+end-sanitize-d30v
+start-sanitize-tic80
+Tue Feb 25 11:41:51 1997  Tom Tromey  <[email protected]>
+
+       * configure.in (host_libs): Build itcl after tcl, tk.
+
+       * configure.in (host_libs): Added db, itcl.
+       (host_tools): Added sn.
+       (noconfigdirs): Added itcl, db, sn in appropriate places.
+       (native_only): Added sn.
+
+       * Makefile.in (all-db, all-sn): New targets.
+       (ALL_MODULES): Added all-sn.
+       (CROSS_CHECK_MODULES): Added check-sn.
+       (INSTALL_MODULES): Added install-sn.
+       (CLEAN_MODULES): Added clean-sn.
+
+end-sanitize-tic80
+start-sanitize-d30v
+Fri Feb 21 17:56:25 1997  Martin M. Hunt  <[email protected]>
+
+       * configure.in (noconfigdirs): Enable ld for d30v.
+
+end-sanitize-d30v
+start-sanitize-tic80
+Fri Feb 21 20:58:51 1997  Michael Meissner  <[email protected]>
+
+       * configure.in (tic80-*-*): Build compiler.
+
+end-sanitize-tic80
+start-sanitize-d30v
+Sun Feb 16 15:41:09 1997  Andrew Cagney  <[email protected]>
+
+       * configure.in (d30v-*): Remove sim directory from list of
+       unsupported d30v directories
+
+end-sanitize-d30v
+start-sanitize-d30v
+Tue Feb 18 17:32:42 1997  Martin M. Hunt  <[email protected]>
+
+       * config.sub, configure.in: Add d30v target cpu. 
+       
+end-sanitize-d30v
+Thu Feb 13 22:04:44 1997  Klaus Kaempf  <[email protected]>
+
+       * makefile.vms: New file.
+       * make-all.com: Remove.
+
+Wed Feb 12 12:54:18 1997  Jim Wilson  <[email protected]>
+
+       * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
+
+start-sanitize-r5900
+Fri Feb  7 16:39:29 1997  Gavin Koch  <[email protected]>
+
+       * config.sub, configure.in: add r5900
+
+end-sanitize-r5900        
+Sat Feb  8 20:36:49 1997  Michael Meissner  <[email protected]>
+
+       * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
+
+Tue Feb  4 11:39:29 1997  Tom Tromey  <[email protected]>
+
+       * Makefile.in (ALL_MODULES): Added all-db.
+       (CROSS_CHECK_MODULES): Addec check-db.
+       (INSTALL_MODULES): Added install-db.
+       (CLEAN_MODULES): Added clean-db.
+
+Mon Feb  3 13:29:36 1997  Ian Lance Taylor  <[email protected]>
+
+       * config.guess: Merge with latest FSF sources.
+
+Tue Jan 28 09:20:37 1997  Tom Tromey  <[email protected]>
+
+       * Makefile.in (ALL_MODULES): Added all-itcl.
+       (CROSS_CHECK_MODULES): Added check-itcl.
+       (INSTALL_MODULES): Added install-itcl.
+       (CLEAN_MODULES): Added clean-itcl.
+
+Thu Jan 23 01:44:27 1997  Geoffrey Noer  <[email protected]>
+
+       * configure.in: build gdb for mn10200
+
+Fri Jan 17 15:32:15 1997  Doug Evans  <[email protected]>
+
+       * Makefile.in (all-target-winsup): Depend on all-target-libio.
+
+start-sanitize-tic80
+Mon Jan 13 22:46:54 1997  Michael Meissner  <[email protected]>
+
+       * configure.in (tic80-*-*): Turn off most targets right now.
+
+end-sanitize-tic80
+Fri Jan  3 16:04:03 1997  Ian Lance Taylor  <[email protected]>
+
+       * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
+       rather than the makeinfo program.
+       (do-info): Depend upon all-texinfo.
+
+Tue Dec 31 16:00:31 1996  Ian Lance Taylor  <[email protected]>
+
+       * configure.in: Remove uses of config/mh-linux.
+
+       * config.sub, config.guess: Merge with latest FSF sources.
+
+start-sanitize-tic80
+Fri Dec 27 23:04:33 1996  Fred Fish  <[email protected]>
+
+       * config.sub (case $basic_machine): Add tic80 entries.
+
+end-sanitize-tic80
+Fri Dec 27 12:07:59 1996  Ian Lance Taylor  <[email protected]>
+
+       * config.sub, config.guess: Merge with latest FSF sources.
+
+Wed Dec 18 22:46:39 1996  Stan Shebs  <[email protected]>
+
+       * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
+       * mpw-config.in: Test for NewFolderRecursive.
+       * mpw-install: Use symbolic name for startup filename.
+       * mpw-README: Add various additional details.
+
+Wed Dec 18 13:11:46 1996  Jim Wilson  <[email protected]>
+
+       * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
+
+Wed Dec 18 10:29:31 1996  Jeffrey A Law  ([email protected])
+
+       * configure.in: Do build gcc and the target libraries for
+       the mn10200.
+
+Wed Dec  4 16:53:05 1996  Geoffrey Noer  <[email protected]>
+
+       * configure.in: don't avoid building gdb for mn10300 any more
+       * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
+       instead of single-quoting it.
+
+Tue Dec  3 23:26:50 1996  Jason Merrill  <[email protected]>
+
+       * configure.in: Don't use --with-stabs on IRIX 6.
+
+Tue Dec  3 09:05:25 1996  Doug Evans  <[email protected]>
+
+       * configure.in (m32r): Build gdb, libg++ now.
+
+Sun Dec  1 00:18:59 1996  Peter Schauer  ([email protected])
+
+       * configure.in (mips*-sgi-irix6*):  Remove gdb and related
+       directories from noconfigdirs.
+
+Tue Nov 26 11:45:33 1996  Kim Knuttila  <[email protected]>
+
+       * config.sub (basic_machine): added mips16 configuration
+
+Sat Nov 23 19:26:22 1996  Michael Meissner  <[email protected]>
+
+       * config.sub: Handle d10v-unknown.
+
+start-sanitize-v850
+Sat Nov 23 14:23:01 1996  Gavin Koch  <[email protected]>
+
+       * gcc/depragmaize.c: Handle MSDOS's (non-unix) text files.
+
+Sat Nov 23 10:23:01 1996  Gavin Koch  <[email protected]>
+
+       * config.sub: Handle v850-unknown.
+
+end-sanitize-v850
+Thu Nov 21 16:19:44 1996  Geoffrey Noer  <[email protected]>
+
+       * Makefile.in: add findutils
+       * configure.in: add findutils to list of host_tools
+
+Wed Nov 20 10:09:01 1996  Jeffrey A Law  ([email protected])
+
+       * config.sub: Handle mn10200 and mn10300.
+
+Tue Nov 19 16:35:14 1996  Michael Meissner  <[email protected]>
+
+       * configure.in (d10v-*): Do not build librx.
+
+Mon Nov 18 13:28:41 1996  Jeffrey A Law  ([email protected])
+
+       * configure.in (mn10300): Build everything except gdb & libgloss.
+
+Wed Nov 13 14:59:46 1996  Per Bothner  <[email protected]>
+
+       * config.guess:  Patch for Dansk Data Elektronik servers,
+       from Niels Skou Olsen <[email protected]>.
+
+       For ncr, use /bin/uname rather than uname, since GNU uname does not
+       support -p.  Suggested by Mark Mitchell <[email protected]>.
+
+       Patch for MIPS R4000 running System V,
+       from Eric S. Raymond <[email protected]>.
+
+       Fix thinko for nextstep.
+
+       Patch for OSF1 in i?86, from Dan Murphy <[email protected]> via Harlan Stenn.
+
+       Sat Jun 24 18:58:17 1995  Morten Welinder  <[email protected]>
+       * config.guess: Guess mips-dec-mach_bsd4.3.
+
+       Thu Oct 10 04:07:04 1996  Harlan Stenn <[email protected]>
+       * config.guess (i?86-ncr-sysv*):  Emit just enough of the minor
+       release numbers.
+       * config.guess (mips-mips-riscos*):  Emit just enough of the
+       release number.
+
+       Tue Oct  8 10:37:22 1996  Frank Vance <[email protected]>
+       * config.guess (sparc-auspex-sunos*):  Added.
+       (f300-fujitsu-*): Added.
+
+       Wed Sep 25 22:00:35 1996  Jeff Woolsey <[email protected]>
+       * config.guess:  Recognize a Tadpole as a sparc.
+
+Wed Nov 13 00:53:09 1996  David J. MacKenzie  <[email protected]>
+
+       * config.guess: Don't assume that NextStep version is either 2 or
+       3.  NextStep 4 (aka OpenStep 4) has come out now.
+
+Mon Nov 11 23:52:03 1996  David J. MacKenzie  <[email protected]>
+
+       * config.guess: Support Cray T90 that reports itself as "CRAY TS".
+       From Rik Faith <[email protected]>.
+
+Fri Nov  8 11:34:58 1996  David J. MacKenzie  <[email protected]>
+
+       * config.sub: Contributions from bug-gnu-utils to:
+       Support plain "hppa" (no version given) architecture, reported by
+       OpenStep.
+       OpenBSD like NetBSD.
+       LynxOs is not a hardware supplier.
+
+       * config.guess: Contributions from bug-gnu-utils to add support for:
+       OpenBSD like NetBSD.
+       Stratus systems.
+       More Pyramid systems.
+       i[n>4]86 Intel chips.
+       M680[n>4]0 Motorola chips.
+       Use unknown instead of lynx for hardware manufacturer.
+
+Mon Nov 11 10:09:08 1996  Brendan Kehoe  <[email protected]>
+
+       * install.sh (chmodcmd): Set to null if the DST directory already
+       exists.
+
+Mon Nov 11 10:43:41 1996  Michael Meissner  <[email protected]>
+
+       * configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
+       not use mt-ppc target Makefile fragment any more.
+
+Sun Nov  3 19:17:07 1996  Stu Grossman  ([email protected])
+
+       * configure.in (*-*-windows):  Exclude everything but those dirs
+       needed to build windows.
+
+Tue Oct 29 16:41:31 1996  Doug Evans  <[email protected]>
+
+       * Makefile.in (all-target-winsup): Depend on all-target-librx.
+
+Mon Oct 28 17:32:46 1996  Stu Grossman  ([email protected])
+
+       * configure.in:  Exclude mmalloc from i386-windows.
+       * config/mh-windows:  Add rules for building MSVC makefiles.
+
+Thu Oct 24 09:22:46 1996  Stu Grossman  ([email protected])
+
+       * Undo my previous change.
+
+Thu Oct 24 12:12:04 1996  Ian Lance Taylor  <[email protected]>
+
+       * Makefile.in (EXTRA_GCC_FLAGS): Pass down GCC_FOR_TARGET
+       unconditionally.
+       (MAKEOVERRIDES): Define (revert this part of October 18 change).
+
+Thu Oct 24 09:02:07 1996  Stu Grossman  ([email protected])
+
+       * Makefile.in (FLAGS_TO_PASS):  Add $(HOST_FLAGS) to allow the
+       host to add it's own flags.
+       * config/mh-windows (HOST_FLAGS):  Set srcroot, which is needed
+       for MSVC build procedure.
+
+Tue Oct 22 15:20:26 1996  Ian Lance Taylor  <[email protected]>
+
+       * configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.
+
+Fri Oct 18 13:37:13 1996  Ian Lance Taylor  <[email protected]>
+
+       * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
+       (CXX_FOR_TARGET): Likewise.
+       (GCC_FOR_TARGET): Define.
+       (BASE_FLAGS_TO_PASS): Remove GCC_FOR_TARGET.
+       (EXTRA_GCC_FLAGS): Define GCC_FOR_TARGET based on whether
+       CC_FOR_TARGET was specified on the command line.
+       (MAKEOVERRIDES): Don't define.
+
+Thu Oct 17 10:27:56 1996  Doug Evans  <[email protected]>
+
+       * configure.in (m32r): Fix spelling of libg++ libs.
+
+Thu Oct 10 10:37:17 1996  Stan Shebs  <[email protected]>
+
+       * config.sub (-apple*): Remove, now redundant.
+
+Thu Oct 10 12:30:54 1996  Ian Lance Taylor  <[email protected]>
+
+       * configure: Don't get confused by CPU-VENDOR-linux-gnu.
+
+       * configure: Rework yesterday's sed script patch.
+
+       * config.sub: Merge with FSF.
+
+Wed Oct  9 17:24:59 1996  Per Bothner  <[email protected]>
+
+       * config.guess:  Merge from FSF.
+
+       1996-09-12  Richard Stallman  <[email protected]>
+        * config.guess: Use pc instead of unknown, for pc clone systems.
+        Change linux to linux-gnu.
+
+       Mon Jul 15 23:51:11 1996  Karl Heuer  <[email protected]>
+        * config.guess: Avoid non-portable tr syntax.
+
+Wed Oct  9 06:06:46 1996  Jeffrey A Law  ([email protected])
+
+       * test-build.mk (HOLES): Add "xargs" for gdb.
+
+       * configure: Avoid hpux10.20 sed bug.
+
+Tue Oct  8 08:32:48 1996  Stu Grossman  ([email protected])
+
+       * configure.in config/mh-windows:  Add support for windows host
+       (that is a build done under the Microsoft build environment).
+
+Tue Oct  8 10:39:08 1996  Ian Lance Taylor  <[email protected]>
+
+       * Makefile.in: Replace all uses of srcroot with s, to shrink
+       command line lengths.
+
+       Patches from Geoffrey Noer <[email protected]>:
+       * configure.in: If configuring for newlib, pass --with-newlib to
+       subdirectories.
+       * Makefile.in (CC_FOR_TARGET): If winsup/Makefile exists, pass a
+       -Bnewlib/ and -Lwinsup to gcc.
+       (CXX_FOR_TARGET): Likewise.
+
+Mon Oct  7 10:59:35 1996  Ian Lance Taylor  <[email protected]>
+
+       * Makefile.in (ETC_SUPPORT): Add configure.
+
+Fri Oct  4 12:22:58 1996  Angela Marie Thomas ([email protected])
+
+       * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux 
+       host configuration file.
+
+Thu Oct  3 09:28:25 1996  Jeffrey A Law  ([email protected])
+
+       * configure.in: Break mn10x00 support into separate
+       mn10200 and mn10300 configurations.
+       * config.sub: Likewise.
+
+Wed Oct  2 22:27:52 1996  Jeffrey A Law  ([email protected])
+
+       * configure.in: Add lots of stuff to noconfigdirs for
+       the mn10x00 targets.
+
+       * config.sub, configure.in: Add mn10x00 support.
+
+Wed Oct  2 15:52:36 1996  Klaus Kaempf  <[email protected]>
+
+       * make-all.com: Call conf-a-gas, not config-a-gas.
+
+Tue Oct  1 01:28:41 1996  James G. Smith  <[email protected]>
+
+       * configure.in (noconfigdirs): Don't build libgloss for arm-coff
+       targets.
+
+Mon Sep 30 14:24:01 1996  Stan Shebs  <[email protected]>
+
+       * mpw-README: Add much more detail for native PowerMac.
+       * mpw-install: New file.
+       * mpw-configure: Add --norecursion and --help options.
+       * mpw-config.in: Translate readme and install files when
+       copying to objdir.
+       * mpw-build.in: Don't always depend on byacc and flex.
+       (install-only-top): New action.
+
+start-sanitize-v850
+Fri Sep 27 17:39:44 1996  Stu Grossman  ([email protected])
+
+       * configure.in:  You can now configure GDB for the v850.
+
+end-sanitize-v850
+Tue Sep 24 19:05:12 1996  Stan Shebs  <[email protected]>
+
+       * configure.in (noconfigdirs): Don't configure any C++ dirs
+       if targeting D10V.
+
+Tue Sep 17 12:15:31 1996  Ian Lance Taylor  <[email protected]>
+
+       * config.sub: Recognize mips64vr5000.
+
+Mon Sep 16 17:00:52 1996  Ian Lance Taylor  <[email protected]>
+
+       * configure.in: Use a single line for host_tools and native_only.
+
+Mon Sep  9 12:21:30 1996  Doug Evans  <[email protected]>
+
+       * config.sub, configure.in: Add entries for m32r.
+
+Thu Sep  5 13:52:47 1996  Tom Tromey  <[email protected]>
+
+       * Makefile.in (inet-install): Don't run install-gzip.
+
+Wed Sep  4 17:26:13 1996  Stu Grossman  ([email protected])
+
+       * configure.in:  Don't config lots of things for *-*-windows*.
+
+Sat Aug 31 11:45:57 1996  Stan Shebs  <[email protected]>
+
+       * mpw-config.in: Test for mpw-true, true, and null-command scripts.
+       (host_libs, host_tools): Copy from configure.in.
+       * mpw-configure: Don't complain about directories not found.
+
+Thu Aug 29 16:44:58 1996  Michael Meissner  <[email protected]>
+
+       * configure.in (i[345]86): Recognize i686 for pentium pro.
+       (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
+       file.
+
+       * config.guess (i[345]86): Ditto.
+
+Mon Aug 26 18:34:42 1996  Martin M. Hunt  <[email protected]>
+
+       * configure.in (noconfigdirs): Removed gdb for D10V.
+
+start-sanitize-v850
+Thu Aug 22 17:13:52 1996  Jeffrey A Law  ([email protected])
+
+       * configure.in: Remove ld, target-libio, target-libg++, and
+       target-libstdc++ from noconfigdirs.
+
+end-sanitize-v850
+Wed Aug 21 18:56:38 1996  Fred Fish  <[email protected]>
+
+       * configure: Fix three locations where shell scripts were
+       being run directly rather than with config_shell.
+
+start-sanitize-v850
+Tue Aug 20 13:08:47 1996  J.T. Conklin  <[email protected]>
+
+       * configure.in (v850-*-*): Set up initial $noconfigdirs.
+       * config.sub (basic_machine): Recognize v850.
+
+end-sanitize-v850
+Thu Aug 15 12:19:33 1996  Stan Shebs  <[email protected]>
+
+       * mpw-configure: Handle multiple enable/disable options and
+       pass them down recursively, handle -c and -s flags appropriately
+       depending on choice of compiler, add escape mechanism for
+       quoted arguments to gC.
+
+Mon Aug 12 13:15:13 1996  Michael Meissner  <[email protected]>
+
+       * configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
+       solaris targets, use config/mt-ppc to set C{,XX}FLAGS_FOR_TARGETS
+       so that -mrelocatable-lib and -mno-eabi are used.
+
+       * Makefile.in (CONFIGURE_TARGET_MODULES): If target compiler does
+       not support --print-multi-lib, don't abort.
+
+Sun Aug 11 20:51:50 1996  Stu Grossman  ([email protected])
+
+       * config/mh-cygwin32 (CFLAGS):  Define _WIN32 to be compatible
+       with normal Windows compilation environment.
+
+Thu Aug  8 12:18:59 1996  Klaus Kaempf  <[email protected]>
+
+       * make-all.com: Run config-a-gas.
+       * setup.com: Don't copy subdirectory files around.
+
+Tue Jul 30 17:49:31 1996  Brendan Kehoe  <[email protected]>
+
+       * configure.in (*-*-ose): Remove exclusion of libgloss for this
+       target, it now compiles correctly.
+
+Sat Jul 27 15:10:43 1996  Stan Shebs  <[email protected]>
+
+       * mpw-config.in: Generate Mac include for elf/dwarf2.h.
+
+Tue Jul 23 10:47:04 1996  Martin M. Hunt  <[email protected]>
+
+       * configure.in (d10v-*-*): Remove ld from $noconfigdirs. 
+
+Mon Jul 22 13:28:51 1996  Brendan Kehoe  <[email protected]>
+
+       * configure.in (native_only): Add prms.
+
+Mon Jul 22 12:27:58 1996  Ian Lance Taylor  <[email protected]>
+
+       * Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
+       (BINUTILS_SUPPORT_DIRS): Likewise.
+
+Thu Jul 18 12:55:40 1996  Michael Meissner  <[email protected]>
+
+       * configure.in (d10v-*-*): Don't configure ld or gdb until the
+       d10v support is added.
+
+Wed Jul 17 14:33:09 1996  Martin M. Hunt  <[email protected]>
+
+       * configure.in (d10v-*-*): New target.
+
+Mon Jul 15 11:53:00 1996  Jeffrey A Law  ([email protected])
+
+       * config.guess (HP 9000/811): Recognize this as a PA1.1
+       machine.
+
+Fri Jul 12 23:21:17 1996  Ken Raeburn  <[email protected]>
+
+       * Makefile.in (do-tar-gz): New target, split out from tail end of
+       taz target.  Run each command separately, don't use pipes.
+       (taz): Use it.
+
+Fri Jul 12 12:08:04 1996  Stan Shebs  <[email protected]>
+
+       * mpw-configure: Look for g-mpw-make.sed in config/mpw.
+       * mpw-build.in: No builds should depend on building byacc or flex,
+       they are assumed to be installed already.
+
+Fri Jul 12 09:52:52 1996  Michael Meissner  <[email protected]>
+
+       * Makefile.in (CONFIGURE_TARGET_MODULES): Set r environment
+       variable that CC_FOR_TARGET needs.
+
+Thu Jul 11 10:09:45 1996  Michael Meissner  <[email protected]>
+
+       * Makefile.in (CONFIGURE_TARGET_MODULES): Determine if the multlib
+       options have changed since the last time the subdirectory was
+       configured, and if it has, reconfigure.
+       (CLEAN_TARGET_MODULES): Delete multilib.out and tmpmulti.out, which
+       CONFIGURE_TARGET_MODULES uses to remember the old multilib options.
+
 Wed Jul 10 18:56:59 1996  Doug Evans  <[email protected]>
 
        * Makefile.in (ALL_MODULES,CROSS_CHECK_MODULES,INSTALL_MODULES,
@@ -8,11 +632,9 @@ Mon Jul  8 17:33:14 1996  Jim Wilson  <[email protected]>
 
        * configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
 
-start-sanitize-d10v
 Mon Jul  1 13:31:35 1996  Michael Meissner  <[email protected]>
 
        * config.sub (basic_machine): Recognize d10v as a valid processor.
-end-sanitize-d10v
 
 Fri Jun 28 12:14:35 1996  Stan Shebs  <[email protected]>
 
@@ -4336,8 +4958,8 @@ Fri Nov 22 07:38:11 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
 
 \f
 Local Variables:
-mode: indented-text
+mode: change-log
 left-margin: 8
-fill-column: 74
+fill-column: 76
 version-control: never
 End: