+
+ * mkinstalldirs: New file, copied from automake.
+ * Makefile.in (installdirs): Rename from install-dirs. Use
+ mkinstalldirs. Change all users.
+
+
+ * install-sh: Rename from install.sh.
+ * Makefile.in (INSTALL): Change install.sh to install-sh.
+ (DEVO_SUPPORT): Likewise.
+
+ * configure: Use ${config_shell} with ${moveifchange}. From Thomas
+
+
+ * config.guess: Recognize OpenBSD systems correctly.
+
+
+ * README, Makefile.in (ETC_SUPPORT): Remove references to
+ cfg-paper*, configure.{texi,man,info*}._
+
+
+ * Makefile.in (all.normal): Ensure that gcc is built after all
+ the x11 - ie gdb - targets.
+
+
+ * makefile.vms: Don't run conf-a-gas.
+
+
+ * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
+
+start-sanitize-tic80
+
+ * configure.in: Remove noconfigdirs case since gdb also
+ configures and builds for tic80-coff.
+
+end-sanitize-tic80
+
+ * configure: Set cache_file to config.cache.
+ * Makefile.in (local-distclean): Remove config.cache.
+
+
+ * COPYING: Update FSF address.
+
+start-sanitize-tic80
+
+ * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
+ noconfigdirs.
+
+end-sanitize-tic80
+
+ * Makefile.in (install-dirs): Don't crash if prefix, and hence
+ MAKEDIRS, is empty.
+
+
+ * config.sub: Tweak mn10300 entry.
+
+
+ * configure.in (host_tools): Put sim before gdb, so gdb's
+ configure.tgt can determine if the simulator was configured.
+
+
+ * config.sub: Move BeOS $os case to be with other Cygnus
+ local cases.
+
+
+ * config.sub: Remove misplaced comment that broke Linux.
+
+
+ * config.sub: Add BeOS support.
+
+
+ * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
+
+
+ * configure.in (noconfigdirs): Remove tcl and tk from
+ noconfigdirs for cygwin32 builds.
+
+start-sanitize-tic80
+
+ * configure.in (tic80-*-*): Remove ld from noconfigdirs.
+
+end-sanitize-tic80
+
+ * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
+ make-all.com, use makefile.vms instead.
+
+
+ * config.sub: Accept -lnews*.
+
+start-sanitize-d30v
+
+ * configure.in (noconfigdirs): Disable target-newlib,
+ target-examples and target-libiberty for d30v.
+
+end-sanitize-d30v
+start-sanitize-tic80
+
+ * configure.in (host_libs): Build itcl after tcl, tk.
+
+ * configure.in (host_libs): Added db, itcl.
+ (host_tools): Added sn.
+ (noconfigdirs): Added itcl, db, sn in appropriate places.
+ (native_only): Added sn.
+
+ * Makefile.in (all-db, all-sn): New targets.
+ (ALL_MODULES): Added all-sn.
+ (CROSS_CHECK_MODULES): Added check-sn.
+ (INSTALL_MODULES): Added install-sn.
+ (CLEAN_MODULES): Added clean-sn.
+
+end-sanitize-tic80
+start-sanitize-d30v
+
+ * configure.in (noconfigdirs): Enable ld for d30v.
+
+end-sanitize-d30v
+start-sanitize-tic80
+
+ * configure.in (tic80-*-*): Build compiler.
+
+end-sanitize-tic80
+start-sanitize-d30v
+
+ * configure.in (d30v-*): Remove sim directory from list of
+ unsupported d30v directories
+
+end-sanitize-d30v
+start-sanitize-d30v
+
+ * config.sub, configure.in: Add d30v target cpu.
+
+end-sanitize-d30v
+
+ * makefile.vms: New file.
+ * make-all.com: Remove.
+
+
+ * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
+
+start-sanitize-r5900
+
+ * config.sub, configure.in: add r5900
+
+end-sanitize-r5900
+
+ * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
+
+
+ * Makefile.in (ALL_MODULES): Added all-db.
+ (CROSS_CHECK_MODULES): Addec check-db.
+ (INSTALL_MODULES): Added install-db.
+ (CLEAN_MODULES): Added clean-db.
+
+
+ * config.guess: Merge with latest FSF sources.
+
+
+ * Makefile.in (ALL_MODULES): Added all-itcl.
+ (CROSS_CHECK_MODULES): Added check-itcl.
+ (INSTALL_MODULES): Added install-itcl.
+ (CLEAN_MODULES): Added clean-itcl.
+
+
+ * configure.in: build gdb for mn10200
+
+
+ * Makefile.in (all-target-winsup): Depend on all-target-libio.
+
+start-sanitize-tic80
+
+ * configure.in (tic80-*-*): Turn off most targets right now.
+
+end-sanitize-tic80
+
+ * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
+ rather than the makeinfo program.
+ (do-info): Depend upon all-texinfo.
+
+
+ * configure.in: Remove uses of config/mh-linux.
+
+ * config.sub, config.guess: Merge with latest FSF sources.
+
+start-sanitize-tic80
+
+ * config.sub (case $basic_machine): Add tic80 entries.
+
+end-sanitize-tic80
+
+ * config.sub, config.guess: Merge with latest FSF sources.
+
+
+ * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
+ * mpw-config.in: Test for NewFolderRecursive.
+ * mpw-install: Use symbolic name for startup filename.
+ * mpw-README: Add various additional details.
+
+
+ * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
+
+
+ * configure.in: Do build gcc and the target libraries for
+ the mn10200.
+
+
+ * configure.in: don't avoid building gdb for mn10300 any more
+ * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
+ instead of single-quoting it.
+
+
+ * configure.in: Don't use --with-stabs on IRIX 6.
+
+
+ * configure.in (m32r): Build gdb, libg++ now.
+
+
+ * configure.in (mips*-sgi-irix6*): Remove gdb and related
+ directories from noconfigdirs.
+
+
+ * config.sub (basic_machine): added mips16 configuration
+
+
+ * config.sub: Handle d10v-unknown.
+
+start-sanitize-v850
+
+ * gcc/depragmaize.c: Handle MSDOS's (non-unix) text files.
+
+
+ * config.sub: Handle v850-unknown.
+
+end-sanitize-v850
+
+ * Makefile.in: add findutils
+ * configure.in: add findutils to list of host_tools
+
+
+ * config.sub: Handle mn10200 and mn10300.
+
+
+ * configure.in (d10v-*): Do not build librx.
+
+
+ * configure.in (mn10300): Build everything except gdb & libgloss.
+
* config.guess: Patch for Dansk Data Elektronik servers,
CC_FOR_TARGET was specified on the command line.
(MAKEOVERRIDES): Don't define.
-start-sanitize-m32r
* configure.in (m32r): Fix spelling of libg++ libs.
-end-sanitize-m32r
* config.sub (-apple*): Remove, now redundant.
* configure.in: You can now configure GDB for the v850.
end-sanitize-v850
-start-sanitize-d10v
* configure.in (noconfigdirs): Don't configure any C++ dirs
if targeting D10V.
-end-sanitize-d10v
* config.sub: Recognize mips64vr5000.
* configure.in: Use a single line for host_tools and native_only.
-start-sanitize-m32r
* config.sub, configure.in: Add entries for m32r.
-end-sanitize-m32r
* Makefile.in (inet-install): Don't run install-gzip.
* config.guess (i[345]86): Ditto.
-start-sanitize-d10v
* configure.in (noconfigdirs): Removed gdb for D10V.
-end-sanitize-d10v
start-sanitize-v850
* mpw-config.in: Generate Mac include for elf/dwarf2.h.
-start-sanitize-d10v
* configure.in (d10v-*-*): Remove ld from $noconfigdirs.
-end-sanitize-d10v
* configure.in (native_only): Add prms.
* Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
(BINUTILS_SUPPORT_DIRS): Likewise.
-start-sanitize-d10v
* configure.in (d10v-*-*): Don't configure ld or gdb until the
* configure.in (d10v-*-*): New target.
-end-sanitize-d10v
* config.guess (HP 9000/811): Recognize this as a PA1.1
* configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
-start-sanitize-d10v
* config.sub (basic_machine): Recognize d10v as a valid processor.
-end-sanitize-d10v
\f
Local Variables:
-mode: indented-text
+mode: change-log
left-margin: 8
-fill-column: 74
+fill-column: 76
version-control: never
End:
projects / binutils.git / blobdiff