/* Machine independent support for SVR4 /proc (process file system) for GDB.
- Copyright 1991, 1992 Free Software Foundation, Inc.
- Written by Fred Fish at Cygnus Support.
+ Copyright 1999, 2000, 2001 Free Software Foundation, Inc.
+ Written by Michael Snyder at Cygnus Solutions.
+ Based on work by Fred Fish, Stu Grossman, Geoff Noer, and others.
This file is part of GDB.
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+along with this program; if not, write to the Free Software Foundation,
+Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+#include "defs.h"
+#include "inferior.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "gdbcmd.h"
+#include "gdbthread.h"
-/* N O T E S
-
-For information on the details of using /proc consult section proc(4)
-in the UNIX System V Release 4 System Administrator's Reference Manual.
-
-The general register and floating point register sets are manipulated by
-separate ioctl's. This file makes the assumption that if FP0_REGNUM is
-defined, then support for the floating point register set is desired,
-regardless of whether or not the actual target has floating point hardware.
+#if defined (NEW_PROC_API)
+#define _STRUCTURED_PROC 1 /* Should be done by configure script. */
+#endif
+#include <sys/procfs.h>
+#ifdef HAVE_SYS_FAULT_H
+#include <sys/fault.h>
+#endif
+#ifdef HAVE_SYS_SYSCALL_H
+#include <sys/syscall.h>
+#endif
+#include <sys/errno.h>
+#include <sys/wait.h>
+#include <signal.h>
+#include <ctype.h>
+
+/*
+ * PROCFS.C
+ *
+ * This module provides the interface between GDB and the
+ * /proc file system, which is used on many versions of Unix
+ * as a means for debuggers to control other processes.
+ * Examples of the systems that use this interface are:
+ * Irix
+ * Solaris
+ * OSF
+ * Unixware
+ * AIX5
+ *
+ * /proc works by immitating a file system: you open a simulated file
+ * that represents the process you wish to interact with, and
+ * perform operations on that "file" in order to examine or change
+ * the state of the other process.
+ *
+ * The most important thing to know about /proc and this module
+ * is that there are two very different interfaces to /proc:
+ * One that uses the ioctl system call, and
+ * another that uses read and write system calls.
+ * This module has to support both /proc interfaces. This means
+ * that there are two different ways of doing every basic operation.
+ *
+ * In order to keep most of the code simple and clean, I have
+ * defined an interface "layer" which hides all these system calls.
+ * An ifdef (NEW_PROC_API) determines which interface we are using,
+ * and most or all occurrances of this ifdef should be confined to
+ * this interface layer.
*/
-#include "defs.h"
+/* Determine which /proc API we are using:
+ The ioctl API defines PIOCSTATUS, while
+ the read/write (multiple fd) API never does. */
-#include <time.h>
-#include <sys/procfs.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <string.h>
+#ifdef NEW_PROC_API
+#include <sys/types.h>
+#include "gdb_dirent.h" /* opendir/readdir, for listing the LWP's */
+#endif
-#include "inferior.h"
-#include "target.h"
-#include "command.h"
-#include "gdbcore.h"
+#include <fcntl.h> /* for O_RDONLY */
+#include <unistd.h> /* for "X_OK" */
+#include "gdb_stat.h" /* for struct stat */
-#define MAX_SYSCALLS 256 /* Maximum number of syscalls for table */
-
-#ifndef PROC_NAME_FMT
-#define PROC_NAME_FMT "/proc/%05d"
-#endif
-
-extern struct target_ops procfs_ops; /* Forward declaration */
-
-#if 1 /* FIXME: Gross and ugly hack to resolve coredep.c global */
-CORE_ADDR kernel_u_addr;
-#endif
-
-#ifdef BROKEN_SIGINFO_H /* Workaround broken SGS <sys/siginfo.h> */
-#undef si_pid
-#define si_pid _data._proc.pid
-#undef si_uid
-#define si_uid _data._proc._pdata._kill.uid
-#endif /* BROKEN_SIGINFO_H */
-
-/* All access to the inferior, either one started by gdb or one that has
- been attached to, is controlled by an instance of a procinfo structure,
- defined below. Since gdb currently only handles one inferior at a time,
- the procinfo structure for the inferior is statically allocated and
- only one exists at any given time. There is a separate procinfo
- structure for use by the "info proc" command, so that we can print
- useful information about any random process without interfering with
- the inferior's procinfo information. */
-
-struct procinfo {
- int valid; /* Nonzero if pid, fd, & pathname are valid */
- int pid; /* Process ID of inferior */
- int fd; /* File descriptor for /proc entry */
- char *pathname; /* Pathname to /proc entry */
- int was_stopped; /* Nonzero if was stopped prior to attach */
- int nopass_next_sigstop; /* Don't pass a sigstop on next resume */
- prrun_t prrun; /* Control state when it is run */
- prstatus_t prstatus; /* Current process status info */
- gregset_t gregset; /* General register set */
- fpregset_t fpregset; /* Floating point register set */
- fltset_t fltset; /* Current traced hardware fault set */
- sigset_t trace; /* Current traced signal set */
- sysset_t exitset; /* Current traced system call exit set */
- sysset_t entryset; /* Current traced system call entry set */
- fltset_t saved_fltset; /* Saved traced hardware fault set */
- sigset_t saved_trace; /* Saved traced signal set */
- sigset_t saved_sighold; /* Saved held signal set */
- sysset_t saved_exitset; /* Saved traced system call exit set */
- sysset_t saved_entryset; /* Saved traced system call entry set */
-};
+/* Note: procfs-utils.h must be included after the above system header
+ files, because it redefines various system calls using macros.
+ This may be incompatible with the prototype declarations. */
+
+#include "proc-utils.h"
-static struct procinfo pi; /* Inferior's process information */
+/* Prototypes for supply_gregset etc. */
+#include "gregset.h"
-/* Much of the information used in the /proc interface, particularly for
- printing status information, is kept as tables of structures of the
- following form. These tables can be used to map numeric values to
- their symbolic names and to a string that describes their specific use. */
+/* =================== TARGET_OPS "MODULE" =================== */
-struct trans {
- int value; /* The numeric value */
- char *name; /* The equivalent symbolic value */
- char *desc; /* Short description of value */
-};
+/*
+ * This module defines the GDB target vector and its methods.
+ */
-/* Translate bits in the pr_flags member of the prstatus structure, into the
- names and desc information. */
+static void procfs_open (char *, int);
+static void procfs_attach (char *, int);
+static void procfs_detach (char *, int);
+static void procfs_resume (ptid_t, int, enum target_signal);
+static int procfs_can_run (void);
+static void procfs_stop (void);
+static void procfs_files_info (struct target_ops *);
+static void procfs_fetch_registers (int);
+static void procfs_store_registers (int);
+static void procfs_notice_signals (ptid_t);
+static void procfs_prepare_to_store (void);
+static void procfs_kill_inferior (void);
+static void procfs_mourn_inferior (void);
+static void procfs_create_inferior (char *, char *, char **);
+static ptid_t procfs_wait (ptid_t, struct target_waitstatus *);
+static int procfs_xfer_memory (CORE_ADDR, char *, int, int,
+ struct mem_attrib *attrib,
+ struct target_ops *);
+
+static int procfs_thread_alive (ptid_t);
+
+void procfs_find_new_threads (void);
+char *procfs_pid_to_str (ptid_t);
+
+struct target_ops procfs_ops; /* the target vector */
-static struct trans pr_flag_table[] =
+static void
+init_procfs_ops (void)
{
-#if defined (PR_STOPPED)
- PR_STOPPED, "PR_STOPPED", "Process is stopped",
-#endif
-#if defined (PR_ISTOP)
- PR_ISTOP, "PR_ISTOP", "Stopped on an event of interest",
-#endif
-#if defined (PR_DSTOP)
- PR_DSTOP, "PR_DSTOP", "A stop directive is in effect",
-#endif
-#if defined (PR_ASLEEP)
- PR_ASLEEP, "PR_ASLEEP", "Sleeping in an interruptible system call",
-#endif
-#if defined (PR_FORK)
- PR_FORK, "PR_FORK", "Inherit-on-fork is in effect",
-#endif
-#if defined (PR_RLC)
- PR_RLC, "PR_RLC", "Run-on-last-close is in effect",
-#endif
-#if defined (PR_PTRACE)
- PR_PTRACE, "PR_PTRACE", "Process is being controlled by ptrace",
-#endif
-#if defined (PR_PCINVAL)
- PR_PCINVAL, "PR_PCINVAL", "PC refers to an invalid virtual address",
+ procfs_ops.to_shortname = "procfs";
+ procfs_ops.to_longname = "Unix /proc child process";
+ procfs_ops.to_doc =
+ "Unix /proc child process (started by the \"run\" command).";
+ procfs_ops.to_open = procfs_open;
+ procfs_ops.to_can_run = procfs_can_run;
+ procfs_ops.to_create_inferior = procfs_create_inferior;
+ procfs_ops.to_kill = procfs_kill_inferior;
+ procfs_ops.to_mourn_inferior = procfs_mourn_inferior;
+ procfs_ops.to_attach = procfs_attach;
+ procfs_ops.to_detach = procfs_detach;
+ procfs_ops.to_wait = procfs_wait;
+ procfs_ops.to_resume = procfs_resume;
+ procfs_ops.to_prepare_to_store = procfs_prepare_to_store;
+ procfs_ops.to_fetch_registers = procfs_fetch_registers;
+ procfs_ops.to_store_registers = procfs_store_registers;
+ procfs_ops.to_xfer_memory = procfs_xfer_memory;
+ procfs_ops.to_insert_breakpoint = memory_insert_breakpoint;
+ procfs_ops.to_remove_breakpoint = memory_remove_breakpoint;
+ procfs_ops.to_notice_signals = procfs_notice_signals;
+ procfs_ops.to_files_info = procfs_files_info;
+ procfs_ops.to_stop = procfs_stop;
+
+ procfs_ops.to_terminal_init = terminal_init_inferior;
+ procfs_ops.to_terminal_inferior = terminal_inferior;
+ procfs_ops.to_terminal_ours_for_output = terminal_ours_for_output;
+ procfs_ops.to_terminal_ours = terminal_ours;
+ procfs_ops.to_terminal_info = child_terminal_info;
+
+ procfs_ops.to_find_new_threads = procfs_find_new_threads;
+ procfs_ops.to_thread_alive = procfs_thread_alive;
+ procfs_ops.to_pid_to_str = procfs_pid_to_str;
+
+ procfs_ops.to_has_all_memory = 1;
+ procfs_ops.to_has_memory = 1;
+ procfs_ops.to_has_execution = 1;
+ procfs_ops.to_has_stack = 1;
+ procfs_ops.to_has_registers = 1;
+ procfs_ops.to_stratum = process_stratum;
+ procfs_ops.to_has_thread_control = tc_schedlock;
+ procfs_ops.to_magic = OPS_MAGIC;
+}
+
+/* =================== END, TARGET_OPS "MODULE" =================== */
+
+/*
+ * World Unification:
+ *
+ * Put any typedefs, defines etc. here that are required for
+ * the unification of code that handles different versions of /proc.
+ */
+
+#ifdef NEW_PROC_API /* Solaris 7 && 8 method for watchpoints */
+#ifdef WA_READ
+ enum { READ_WATCHFLAG = WA_READ,
+ WRITE_WATCHFLAG = WA_WRITE,
+ EXEC_WATCHFLAG = WA_EXEC,
+ AFTER_WATCHFLAG = WA_TRAPAFTER
+ };
+#endif
+#else /* Irix method for watchpoints */
+ enum { READ_WATCHFLAG = MA_READ,
+ WRITE_WATCHFLAG = MA_WRITE,
+ EXEC_WATCHFLAG = MA_EXEC,
+ AFTER_WATCHFLAG = 0 /* trapafter not implemented */
+ };
+#endif
+
+/* gdb_sigset_t */
+#ifdef HAVE_PR_SIGSET_T
+typedef pr_sigset_t gdb_sigset_t;
+#else
+typedef sigset_t gdb_sigset_t;
#endif
-#if defined (PR_ISSYS)
- PR_ISSYS, "PR_ISSYS", "Is a system process",
+
+/* sigaction */
+#ifdef HAVE_PR_SIGACTION64_T
+typedef pr_sigaction64_t gdb_sigaction_t;
+#else
+typedef struct sigaction gdb_sigaction_t;
#endif
-#if defined (PR_STEP)
- PR_STEP, "PR_STEP", "Process has single step pending",
+
+/* siginfo */
+#ifdef HAVE_PR_SIGINFO64_T
+typedef pr_siginfo64_t gdb_siginfo_t;
+#else
+typedef struct siginfo gdb_siginfo_t;
#endif
-#if defined (PR_KLC)
- PR_KLC, "PR_KLC", "Kill-on-last-close is in effect",
+
+/* gdb_premptysysset */
+#ifdef premptysysset
+#define gdb_premptysysset premptysysset
+#else
+#define gdb_premptysysset premptyset
#endif
-#if defined (PR_ASYNC)
- PR_ASYNC, "PR_ASYNC", "Asynchronous stop is in effect",
+
+/* praddsysset */
+#ifdef praddsysset
+#define gdb_praddsysset praddsysset
+#else
+#define gdb_praddsysset praddset
#endif
-#if defined (PR_PCOMPAT)
- PR_PCOMPAT, "PR_PCOMPAT", "Ptrace compatibility mode in effect",
+
+/* prdelsysset */
+#ifdef prdelsysset
+#define gdb_prdelsysset prdelsysset
+#else
+#define gdb_prdelsysset prdelset
#endif
- 0, NULL, NULL
-};
-/* Translate values in the pr_why field of the prstatus struct. */
+/* prissyssetmember */
+#ifdef prissyssetmember
+#define gdb_pr_issyssetmember prissyssetmember
+#else
+#define gdb_pr_issyssetmember prismember
+#endif
+
+/* As a feature test, saying ``#if HAVE_PRSYSENT_T'' everywhere isn't
+ as intuitively descriptive as it could be, so we'll define
+ DYNAMIC_SYSCALLS to mean the same thing. Anyway, at the time of
+ this writing, this feature is only found on AIX5 systems and
+ basically means that the set of syscalls is not fixed. I.e,
+ there's no nice table that one can #include to get all of the
+ syscall numbers. Instead, they're stored in /proc/PID/sysent
+ for each process. We are at least guaranteed that they won't
+ change over the lifetime of the process. But each process could
+ (in theory) have different syscall numbers.
+*/
+#ifdef HAVE_PRSYSENT_T
+#define DYNAMIC_SYSCALLS
+#endif
+
+
+
+/* =================== STRUCT PROCINFO "MODULE" =================== */
+
+ /* FIXME: this comment will soon be out of date W.R.T. threads. */
+
+/* The procinfo struct is a wrapper to hold all the state information
+ concerning a /proc process. There should be exactly one procinfo
+ for each process, and since GDB currently can debug only one
+ process at a time, that means there should be only one procinfo.
+ All of the LWP's of a process can be accessed indirectly thru the
+ single process procinfo.
+
+ However, against the day when GDB may debug more than one process,
+ this data structure is kept in a list (which for now will hold no
+ more than one member), and many functions will have a pointer to a
+ procinfo as an argument.
+
+ There will be a separate procinfo structure for use by the (not yet
+ implemented) "info proc" command, so that we can print useful
+ information about any random process without interfering with the
+ inferior's procinfo information. */
+
+#ifdef NEW_PROC_API
+/* format strings for /proc paths */
+# ifndef CTL_PROC_NAME_FMT
+# define MAIN_PROC_NAME_FMT "/proc/%d"
+# define CTL_PROC_NAME_FMT "/proc/%d/ctl"
+# define AS_PROC_NAME_FMT "/proc/%d/as"
+# define MAP_PROC_NAME_FMT "/proc/%d/map"
+# define STATUS_PROC_NAME_FMT "/proc/%d/status"
+# define MAX_PROC_NAME_SIZE sizeof("/proc/99999/lwp/8096/lstatus")
+# endif
+/* the name of the proc status struct depends on the implementation */
+typedef pstatus_t gdb_prstatus_t;
+typedef lwpstatus_t gdb_lwpstatus_t;
+#else /* ! NEW_PROC_API */
+/* format strings for /proc paths */
+# ifndef CTL_PROC_NAME_FMT
+# define MAIN_PROC_NAME_FMT "/proc/%05d"
+# define CTL_PROC_NAME_FMT "/proc/%05d"
+# define AS_PROC_NAME_FMT "/proc/%05d"
+# define MAP_PROC_NAME_FMT "/proc/%05d"
+# define STATUS_PROC_NAME_FMT "/proc/%05d"
+# define MAX_PROC_NAME_SIZE sizeof("/proc/ttttppppp")
+# endif
+/* the name of the proc status struct depends on the implementation */
+typedef prstatus_t gdb_prstatus_t;
+typedef prstatus_t gdb_lwpstatus_t;
+#endif /* NEW_PROC_API */
+
+typedef struct procinfo {
+ struct procinfo *next;
+ int pid; /* Process ID */
+ int tid; /* Thread/LWP id */
+
+ /* process state */
+ int was_stopped;
+ int ignore_next_sigstop;
+
+ /* The following four fd fields may be identical, or may contain
+ several different fd's, depending on the version of /proc
+ (old ioctl or new read/write). */
+
+ int ctl_fd; /* File descriptor for /proc control file */
+ /*
+ * The next three file descriptors are actually only needed in the
+ * read/write, multiple-file-descriptor implemenation (NEW_PROC_API).
+ * However, to avoid a bunch of #ifdefs in the code, we will use
+ * them uniformly by (in the case of the ioctl single-file-descriptor
+ * implementation) filling them with copies of the control fd.
+ */
+ int status_fd; /* File descriptor for /proc status file */
+ int as_fd; /* File descriptor for /proc as file */
+
+ char pathname[MAX_PROC_NAME_SIZE]; /* Pathname to /proc entry */
-static struct trans pr_why_table[] =
-{
-#if defined (PR_REQUESTED)
- PR_REQUESTED, "PR_REQUESTED", "Directed to stop via PIOCSTOP/PIOCWSTOP",
-#endif
-#if defined (PR_SIGNALLED)
- PR_SIGNALLED, "PR_SIGNALLED", "Receipt of a traced signal",
-#endif
-#if defined (PR_FAULTED)
- PR_FAULTED, "PR_FAULTED", "Incurred a traced hardware fault",
-#endif
-#if defined (PR_SYSENTRY)
- PR_SYSENTRY, "PR_SYSENTRY", "Entry to a traced system call",
-#endif
-#if defined (PR_SYSEXIT)
- PR_SYSEXIT, "PR_SYSEXIT", "Exit from a traced system call",
-#endif
-#if defined (PR_JOBCONTROL)
- PR_JOBCONTROL, "PR_JOBCONTROL", "Default job control stop signal action",
+ fltset_t saved_fltset; /* Saved traced hardware fault set */
+ gdb_sigset_t saved_sigset; /* Saved traced signal set */
+ gdb_sigset_t saved_sighold; /* Saved held signal set */
+ sysset_t *saved_exitset; /* Saved traced system call exit set */
+ sysset_t *saved_entryset; /* Saved traced system call entry set */
+
+ gdb_prstatus_t prstatus; /* Current process status info */
+
+#ifndef NEW_PROC_API
+ gdb_fpregset_t fpregset; /* Current floating point registers */
#endif
-#if defined (PR_SUSPENDED)
- PR_SUSPENDED, "PR_SUSPENDED", "Process suspended",
+
+#ifdef DYNAMIC_SYSCALLS
+ int num_syscalls; /* Total number of syscalls */
+ char **syscall_names; /* Syscall number to name map */
#endif
- 0, NULL, NULL
-};
+
+ struct procinfo *thread_list;
+
+ int status_valid : 1;
+ int gregs_valid : 1;
+ int fpregs_valid : 1;
+ int threads_valid: 1;
+} procinfo;
+
+static char errmsg[128]; /* shared error msg buffer */
+
+/* Function prototypes for procinfo module: */
+
+static procinfo *find_procinfo_or_die (int pid, int tid);
+static procinfo *find_procinfo (int pid, int tid);
+static procinfo *create_procinfo (int pid, int tid);
+static void destroy_procinfo (procinfo * p);
+static void do_destroy_procinfo_cleanup (void *);
+static void dead_procinfo (procinfo * p, char *msg, int killp);
+static int open_procinfo_files (procinfo * p, int which);
+static void close_procinfo_files (procinfo * p);
+static int sysset_t_size (procinfo *p);
+static sysset_t *sysset_t_alloc (procinfo * pi);
+#ifdef DYNAMIC_SYSCALLS
+static void load_syscalls (procinfo *pi);
+static void free_syscalls (procinfo *pi);
+static int find_syscall (procinfo *pi, char *name);
+#endif /* DYNAMIC_SYSCALLS */
+
+/* The head of the procinfo list: */
+static procinfo * procinfo_list;
-/* Hardware fault translation table. */
+/*
+ * Function: find_procinfo
+ *
+ * Search the procinfo list.
+ *
+ * Returns: pointer to procinfo, or NULL if not found.
+ */
-static struct trans faults_table[] =
+static procinfo *
+find_procinfo (int pid, int tid)
{
-#if defined (FLTILL)
- FLTILL, "FLTILL", "Illegal instruction",
-#endif
-#if defined (FLTPRIV)
- FLTPRIV, "FLTPRIV", "Privileged instruction",
-#endif
-#if defined (FLTBPT)
- FLTBPT, "FLTBPT", "Breakpoint trap",
-#endif
-#if defined (FLTTRACE)
- FLTTRACE, "FLTTRACE", "Trace trap",
-#endif
-#if defined (FLTACCESS)
- FLTACCESS, "FLTACCESS", "Memory access fault",
-#endif
-#if defined (FLTBOUNDS)
- FLTBOUNDS, "FLTBOUNDS", "Memory bounds violation",
-#endif
-#if defined (FLTIOVF)
- FLTIOVF, "FLTIOVF", "Integer overflow",
-#endif
-#if defined (FLTIZDIV)
- FLTIZDIV, "FLTIZDIV", "Integer zero divide",
-#endif
-#if defined (FLTFPE)
- FLTFPE, "FLTFPE", "Floating-point exception",
-#endif
-#if defined (FLTSTACK)
- FLTSTACK, "FLTSTACK", "Unrecoverable stack fault",
-#endif
-#if defined (FLTPAGE)
- FLTPAGE, "FLTPAGE", "Recoverable page fault",
-#endif
- 0, NULL, NULL
-};
+ procinfo *pi;
+
+ for (pi = procinfo_list; pi; pi = pi->next)
+ if (pi->pid == pid)
+ break;
+
+ if (pi)
+ if (tid)
+ {
+ /* Don't check threads_valid. If we're updating the
+ thread_list, we want to find whatever threads are already
+ here. This means that in general it is the caller's
+ responsibility to check threads_valid and update before
+ calling find_procinfo, if the caller wants to find a new
+ thread. */
+
+ for (pi = pi->thread_list; pi; pi = pi->next)
+ if (pi->tid == tid)
+ break;
+ }
-/* Translation table for signal generation information. See UNIX System
- V Release 4 Programmer's Reference Manual, siginfo(5). */
+ return pi;
+}
-static struct sigcode {
- int signo;
- int code;
- char *codename;
- char *desc;
-} siginfo_table[] = {
-#if defined (SIGILL) && defined (ILL_ILLOPC)
- SIGILL, ILL_ILLOPC, "ILL_ILLOPC", "Illegal opcode",
-#endif
-#if defined (SIGILL) && defined (ILL_ILLOPN)
- SIGILL, ILL_ILLOPN, "ILL_ILLOPN", "Illegal operand",
-#endif
-#if defined (SIGILL) && defined (ILL_ILLADR)
- SIGILL, ILL_ILLADR, "ILL_ILLADR", "Illegal addressing mode",
-#endif
-#if defined (SIGILL) && defined (ILL_ILLTRP)
- SIGILL, ILL_ILLTRP, "ILL_ILLTRP", "Illegal trap",
-#endif
-#if defined (SIGILL) && defined (ILL_PRVOPC)
- SIGILL, ILL_PRVOPC, "ILL_PRVOPC", "Privileged opcode",
-#endif
-#if defined (SIGILL) && defined (ILL_PRVREG)
- SIGILL, ILL_PRVREG, "ILL_PRVREG", "Privileged register",
-#endif
-#if defined (SIGILL) && defined (ILL_COPROC)
- SIGILL, ILL_COPROC, "ILL_COPROC", "Coprocessor error",
-#endif
-#if defined (SIGILL) && defined (ILL_BADSTK)
- SIGILL, ILL_BADSTK, "ILL_BADSTK", "Internal stack error",
-#endif
-#if defined (SIGFPE) && defined (FPE_INTDIV)
- SIGFPE, FPE_INTDIV, "FPE_INTDIV", "Integer divide by zero",
-#endif
-#if defined (SIGFPE) && defined (FPE_INTOVF)
- SIGFPE, FPE_INTOVF, "FPE_INTOVF", "Integer overflow",
-#endif
-#if defined (SIGFPE) && defined (FPE_FLTDIV)
- SIGFPE, FPE_FLTDIV, "FPE_FLTDIV", "Floating point divide by zero",
-#endif
-#if defined (SIGFPE) && defined (FPE_FLTOVF)
- SIGFPE, FPE_FLTOVF, "FPE_FLTOVF", "Floating point overflow",
-#endif
-#if defined (SIGFPE) && defined (FPE_FLTUND)
- SIGFPE, FPE_FLTUND, "FPE_FLTUND", "Floating point underflow",
-#endif
-#if defined (SIGFPE) && defined (FPE_FLTRES)
- SIGFPE, FPE_FLTRES, "FPE_FLTRES", "Floating point inexact result",
-#endif
-#if defined (SIGFPE) && defined (FPE_FLTINV)
- SIGFPE, FPE_FLTINV, "FPE_FLTINV", "Invalid floating point operation",
-#endif
-#if defined (SIGFPE) && defined (FPE_FLTSUB)
- SIGFPE, FPE_FLTSUB, "FPE_FLTSUB", "Subscript out of range",
-#endif
-#if defined (SIGSEGV) && defined (SEGV_MAPERR)
- SIGSEGV, SEGV_MAPERR, "SEGV_MAPERR", "Address not mapped to object",
-#endif
-#if defined (SIGSEGV) && defined (SEGV_ACCERR)
- SIGSEGV, SEGV_ACCERR, "SEGV_ACCERR", "Invalid permissions for object",
-#endif
-#if defined (SIGBUS) && defined (BUS_ADRALN)
- SIGBUS, BUS_ADRALN, "BUS_ADRALN", "Invalid address alignment",
-#endif
-#if defined (SIGBUS) && defined (BUS_ADRERR)
- SIGBUS, BUS_ADRERR, "BUS_ADRERR", "Non-existent physical address",
-#endif
-#if defined (SIGBUS) && defined (BUS_OBJERR)
- SIGBUS, BUS_OBJERR, "BUS_OBJERR", "Object specific hardware error",
-#endif
-#if defined (SIGTRAP) && defined (TRAP_BRKPT)
- SIGTRAP, TRAP_BRKPT, "TRAP_BRKPT", "Process breakpoint",
-#endif
-#if defined (SIGTRAP) && defined (TRAP_TRACE)
- SIGTRAP, TRAP_TRACE, "TRAP_TRACE", "Process trace trap",
-#endif
-#if defined (SIGCLD) && defined (CLD_EXITED)
- SIGCLD, CLD_EXITED, "CLD_EXITED", "Child has exited",
-#endif
-#if defined (SIGCLD) && defined (CLD_KILLED)
- SIGCLD, CLD_KILLED, "CLD_KILLED", "Child was killed",
-#endif
-#if defined (SIGCLD) && defined (CLD_DUMPED)
- SIGCLD, CLD_DUMPED, "CLD_DUMPED", "Child has terminated abnormally",
-#endif
-#if defined (SIGCLD) && defined (CLD_TRAPPED)
- SIGCLD, CLD_TRAPPED, "CLD_TRAPPED", "Traced child has trapped",
-#endif
-#if defined (SIGCLD) && defined (CLD_STOPPED)
- SIGCLD, CLD_STOPPED, "CLD_STOPPED", "Child has stopped",
-#endif
-#if defined (SIGCLD) && defined (CLD_CONTINUED)
- SIGCLD, CLD_CONTINUED, "CLD_CONTINUED", "Stopped child had continued",
-#endif
-#if defined (SIGPOLL) && defined (POLL_IN)
- SIGPOLL, POLL_IN, "POLL_IN", "Input input available",
-#endif
-#if defined (SIGPOLL) && defined (POLL_OUT)
- SIGPOLL, POLL_OUT, "POLL_OUT", "Output buffers available",
-#endif
-#if defined (SIGPOLL) && defined (POLL_MSG)
- SIGPOLL, POLL_MSG, "POLL_MSG", "Input message available",
-#endif
-#if defined (SIGPOLL) && defined (POLL_ERR)
- SIGPOLL, POLL_ERR, "POLL_ERR", "I/O error",
-#endif
-#if defined (SIGPOLL) && defined (POLL_PRI)
- SIGPOLL, POLL_PRI, "POLL_PRI", "High priority input available",
-#endif
-#if defined (SIGPOLL) && defined (POLL_HUP)
- SIGPOLL, POLL_HUP, "POLL_HUP", "Device disconnected",
-#endif
- 0, 0, NULL, NULL
-};
+/*
+ * Function: find_procinfo_or_die
+ *
+ * Calls find_procinfo, but errors on failure.
+ */
+
+static procinfo *
+find_procinfo_or_die (int pid, int tid)
+{
+ procinfo *pi = find_procinfo (pid, tid);
-static char *syscall_table[MAX_SYSCALLS];
+ if (pi == NULL)
+ {
+ if (tid)
+ error ("procfs: couldn't find pid %d (kernel thread %d) in procinfo list.",
+ pid, tid);
+ else
+ error ("procfs: couldn't find pid %d in procinfo list.", pid);
+ }
+ return pi;
+}
-/* Prototypes for local functions */
+/* open_with_retry() is a wrapper for open(). The appropriate
+ open() call is attempted; if unsuccessful, it will be retried as
+ many times as needed for the EAGAIN and EINTR conditions.
+
+ For other conditions, open_with_retry() will retry the open() a
+ limited number of times. In addition, a short sleep is imposed
+ prior to retrying the open(). The reason for this sleep is to give
+ the kernel a chance to catch up and create the file in question in
+ the event that GDB "wins" the race to open a file before the kernel
+ has created it. */
+
+static int
+open_with_retry (const char *pathname, int flags)
+{
+ int retries_remaining, status;
-static void
-set_proc_siginfo PARAMS ((struct procinfo *, int));
+ retries_remaining = 2;
-static void
-init_syscall_table PARAMS ((void));
+ while (1)
+ {
+ status = open (pathname, flags);
-static char *
-syscallname PARAMS ((int));
+ if (status >= 0 || retries_remaining == 0)
+ break;
+ else if (errno != EINTR && errno != EAGAIN)
+ {
+ retries_remaining--;
+ sleep (1);
+ }
+ }
-static char *
-signalname PARAMS ((int));
+ return status;
+}
-static char *
-errnoname PARAMS ((int));
+/*
+ * Function: open_procinfo_files
+ *
+ * Open the file descriptor for the process or LWP.
+ * ifdef NEW_PROC_API, we only open the control file descriptor;
+ * the others are opened lazily as needed.
+ * else (if not NEW_PROC_API), there is only one real
+ * file descriptor, but we keep multiple copies of it so that
+ * the code that uses them does not have to be #ifdef'd.
+ *
+ * Return: file descriptor, or zero for failure.
+ */
-static int
-proc_address_to_fd PARAMS ((CORE_ADDR, int));
+enum { FD_CTL, FD_STATUS, FD_AS };
static int
-open_proc_file PARAMS ((int, struct procinfo *, int));
+open_procinfo_files (procinfo *pi, int which)
+{
+#ifdef NEW_PROC_API
+ char tmp[MAX_PROC_NAME_SIZE];
+#endif
+ int fd;
+
+ /*
+ * This function is getting ALMOST long enough to break up into several.
+ * Here is some rationale:
+ *
+ * NEW_PROC_API (Solaris 2.6, Solaris 2.7, Unixware):
+ * There are several file descriptors that may need to be open
+ * for any given process or LWP. The ones we're intereted in are:
+ * - control (ctl) write-only change the state
+ * - status (status) read-only query the state
+ * - address space (as) read/write access memory
+ * - map (map) read-only virtual addr map
+ * Most of these are opened lazily as they are needed.
+ * The pathnames for the 'files' for an LWP look slightly
+ * different from those of a first-class process:
+ * Pathnames for a process (<proc-id>):
+ * /proc/<proc-id>/ctl
+ * /proc/<proc-id>/status
+ * /proc/<proc-id>/as
+ * /proc/<proc-id>/map
+ * Pathnames for an LWP (lwp-id):
+ * /proc/<proc-id>/lwp/<lwp-id>/lwpctl
+ * /proc/<proc-id>/lwp/<lwp-id>/lwpstatus
+ * An LWP has no map or address space file descriptor, since
+ * the memory map and address space are shared by all LWPs.
+ *
+ * Everyone else (Solaris 2.5, Irix, OSF)
+ * There is only one file descriptor for each process or LWP.
+ * For convenience, we copy the same file descriptor into all
+ * three fields of the procinfo struct (ctl_fd, status_fd, and
+ * as_fd, see NEW_PROC_API above) so that code that uses them
+ * doesn't need any #ifdef's.
+ * Pathname for all:
+ * /proc/<proc-id>
+ *
+ * Solaris 2.5 LWP's:
+ * Each LWP has an independent file descriptor, but these
+ * are not obtained via the 'open' system call like the rest:
+ * instead, they're obtained thru an ioctl call (PIOCOPENLWP)
+ * to the file descriptor of the parent process.
+ *
+ * OSF threads:
+ * These do not even have their own independent file descriptor.
+ * All operations are carried out on the file descriptor of the
+ * parent process. Therefore we just call open again for each
+ * thread, getting a new handle for the same 'file'.
+ */
+
+#ifdef NEW_PROC_API
+ /*
+ * In this case, there are several different file descriptors that
+ * we might be asked to open. The control file descriptor will be
+ * opened early, but the others will be opened lazily as they are
+ * needed.
+ */
+
+ strcpy (tmp, pi->pathname);
+ switch (which) { /* which file descriptor to open? */
+ case FD_CTL:
+ if (pi->tid)
+ strcat (tmp, "/lwpctl");
+ else
+ strcat (tmp, "/ctl");
+ fd = open_with_retry (tmp, O_WRONLY);
+ if (fd <= 0)
+ return 0; /* fail */
+ pi->ctl_fd = fd;
+ break;
+ case FD_AS:
+ if (pi->tid)
+ return 0; /* there is no 'as' file descriptor for an lwp */
+ strcat (tmp, "/as");
+ fd = open_with_retry (tmp, O_RDWR);
+ if (fd <= 0)
+ return 0; /* fail */
+ pi->as_fd = fd;
+ break;
+ case FD_STATUS:
+ if (pi->tid)
+ strcat (tmp, "/lwpstatus");
+ else
+ strcat (tmp, "/status");
+ fd = open_with_retry (tmp, O_RDONLY);
+ if (fd <= 0)
+ return 0; /* fail */
+ pi->status_fd = fd;
+ break;
+ default:
+ return 0; /* unknown file descriptor */
+ }
+#else /* not NEW_PROC_API */
+ /*
+ * In this case, there is only one file descriptor for each procinfo
+ * (ie. each process or LWP). In fact, only the file descriptor for
+ * the process can actually be opened by an 'open' system call.
+ * The ones for the LWPs have to be obtained thru an IOCTL call
+ * on the process's file descriptor.
+ *
+ * For convenience, we copy each procinfo's single file descriptor
+ * into all of the fields occupied by the several file descriptors
+ * of the NEW_PROC_API implementation. That way, the code that uses
+ * them can be written without ifdefs.
+ */
+
+
+#ifdef PIOCTSTATUS /* OSF */
+ /* Only one FD; just open it. */
+ if ((fd = open_with_retry (pi->pathname, O_RDWR)) == 0)
+ return 0;
+#else /* Sol 2.5, Irix, other? */
+ if (pi->tid == 0) /* Master procinfo for the process */
+ {
+ fd = open_with_retry (pi->pathname, O_RDWR);
+ if (fd <= 0)
+ return 0; /* fail */
+ }
+ else /* LWP thread procinfo */
+ {
+#ifdef PIOCOPENLWP /* Sol 2.5, thread/LWP */
+ procinfo *process;
+ int lwpid = pi->tid;
+
+ /* Find the procinfo for the entire process. */
+ if ((process = find_procinfo (pi->pid, 0)) == NULL)
+ return 0; /* fail */
+
+ /* Now obtain the file descriptor for the LWP. */
+ if ((fd = ioctl (process->ctl_fd, PIOCOPENLWP, &lwpid)) <= 0)
+ return 0; /* fail */
+#else /* Irix, other? */
+ return 0; /* Don't know how to open threads */
+#endif /* Sol 2.5 PIOCOPENLWP */
+ }
+#endif /* OSF PIOCTSTATUS */
+ pi->ctl_fd = pi->as_fd = pi->status_fd = fd;
+#endif /* NEW_PROC_API */
-static void
-close_proc_file PARAMS ((struct procinfo *));
+ return 1; /* success */
+}
-static void
-unconditionally_kill_inferior PARAMS ((void));
+/*
+ * Function: create_procinfo
+ *
+ * Allocate a data structure and link it into the procinfo list.
+ * (First tries to find a pre-existing one (FIXME: why?)
+ *
+ * Return: pointer to new procinfo struct.
+ */
-static void
-proc_init_failed PARAMS ((char *));
+static procinfo *
+create_procinfo (int pid, int tid)
+{
+ procinfo *pi, *parent;
-static void
-info_proc PARAMS ((char *, int));
+ if ((pi = find_procinfo (pid, tid)))
+ return pi; /* Already exists, nothing to do. */
-static void
-info_proc_flags PARAMS ((struct procinfo *, int));
+ /* find parent before doing malloc, to save having to cleanup */
+ if (tid != 0)
+ parent = find_procinfo_or_die (pid, 0); /* FIXME: should I
+ create it if it
+ doesn't exist yet? */
-static void
-info_proc_stop PARAMS ((struct procinfo *, int));
+ pi = (procinfo *) xmalloc (sizeof (procinfo));
+ memset (pi, 0, sizeof (procinfo));
+ pi->pid = pid;
+ pi->tid = tid;
-static void
-info_proc_siginfo PARAMS ((struct procinfo *, int));
+#ifdef DYNAMIC_SYSCALLS
+ load_syscalls (pi);
+#endif
-static void
-info_proc_syscalls PARAMS ((struct procinfo *, int));
+ pi->saved_entryset = sysset_t_alloc (pi);
+ pi->saved_exitset = sysset_t_alloc (pi);
-static void
-info_proc_mappings PARAMS ((struct procinfo *, int));
+ /* Chain into list. */
+ if (tid == 0)
+ {
+ sprintf (pi->pathname, MAIN_PROC_NAME_FMT, pid);
+ pi->next = procinfo_list;
+ procinfo_list = pi;
+ }
+ else
+ {
+#ifdef NEW_PROC_API
+ sprintf (pi->pathname, "/proc/%05d/lwp/%d", pid, tid);
+#else
+ sprintf (pi->pathname, MAIN_PROC_NAME_FMT, pid);
+#endif
+ pi->next = parent->thread_list;
+ parent->thread_list = pi;
+ }
+ return pi;
+}
-static void
-info_proc_signals PARAMS ((struct procinfo *, int));
+/*
+ * Function: close_procinfo_files
+ *
+ * Close all file descriptors associated with the procinfo
+ */
static void
-info_proc_faults PARAMS ((struct procinfo *, int));
+close_procinfo_files (procinfo *pi)
+{
+ if (pi->ctl_fd > 0)
+ close (pi->ctl_fd);
+#ifdef NEW_PROC_API
+ if (pi->as_fd > 0)
+ close (pi->as_fd);
+ if (pi->status_fd > 0)
+ close (pi->status_fd);
+#endif
+ pi->ctl_fd = pi->as_fd = pi->status_fd = 0;
+}
-static char *
-mappingflags PARAMS ((long));
+/*
+ * Function: destroy_procinfo
+ *
+ * Destructor function. Close, unlink and deallocate the object.
+ */
-static char *
-lookupname PARAMS ((struct trans *, unsigned int, char *));
+static void
+destroy_one_procinfo (procinfo **list, procinfo *pi)
+{
+ procinfo *ptr;
+
+ /* Step one: unlink the procinfo from its list */
+ if (pi == *list)
+ *list = pi->next;
+ else
+ for (ptr = *list; ptr; ptr = ptr->next)
+ if (ptr->next == pi)
+ {
+ ptr->next = pi->next;
+ break;
+ }
-static char *
-lookupdesc PARAMS ((struct trans *, unsigned int));
+ /* Step two: close any open file descriptors */
+ close_procinfo_files (pi);
-static int
-do_attach PARAMS ((int pid));
+ /* Step three: free the memory. */
+#ifdef DYNAMIC_SYSCALLS
+ free_syscalls (pi);
+#endif
+ xfree (pi->saved_entryset);
+ xfree (pi->saved_exitset);
+ xfree (pi);
+}
static void
-do_detach PARAMS ((int siggnal));
+destroy_procinfo (procinfo *pi)
+{
+ procinfo *tmp;
-static void
-procfs_create_inferior PARAMS ((char *, char *, char **));
+ if (pi->tid != 0) /* destroy a thread procinfo */
+ {
+ tmp = find_procinfo (pi->pid, 0); /* find the parent process */
+ destroy_one_procinfo (&tmp->thread_list, pi);
+ }
+ else /* destroy a process procinfo and all its threads */
+ {
+ /* First destroy the children, if any; */
+ while (pi->thread_list != NULL)
+ destroy_one_procinfo (&pi->thread_list, pi->thread_list);
+ /* Then destroy the parent. Genocide!!! */
+ destroy_one_procinfo (&procinfo_list, pi);
+ }
+}
static void
-procfs_notice_signals PARAMS ((void));
+do_destroy_procinfo_cleanup (void *pi)
+{
+ destroy_procinfo (pi);
+}
-/* External function prototypes that can't be easily included in any
- header file because the args are typedefs in system include files. */
+enum { NOKILL, KILL };
-extern void
-supply_gregset PARAMS ((gregset_t *));
+/*
+ * Function: dead_procinfo
+ *
+ * To be called on a non_recoverable error for a procinfo.
+ * Prints error messages, optionally sends a SIGKILL to the process,
+ * then destroys the data structure.
+ */
-extern void
-fill_gregset PARAMS ((gregset_t *, int));
+static void
+dead_procinfo (procinfo *pi, char *msg, int kill_p)
+{
+ char procfile[80];
-extern void
-supply_fpregset PARAMS ((fpregset_t *));
+ if (pi->pathname)
+ {
+ print_sys_errmsg (pi->pathname, errno);
+ }
+ else
+ {
+ sprintf (procfile, "process %d", pi->pid);
+ print_sys_errmsg (procfile, errno);
+ }
+ if (kill_p == KILL)
+ kill (pi->pid, SIGKILL);
-extern void
-fill_fpregset PARAMS ((fpregset_t *, int));
+ destroy_procinfo (pi);
+ error (msg);
+}
/*
+ * Function: sysset_t_size
+ *
+ * Returns the (complete) size of a sysset_t struct. Normally, this
+ * is just sizeof (syset_t), but in the case of Monterey/64, the actual
+ * size of sysset_t isn't known until runtime.
+ */
+
+static int
+sysset_t_size (procinfo * pi)
+{
+#ifndef DYNAMIC_SYSCALLS
+ return sizeof (sysset_t);
+#else
+ return sizeof (sysset_t) - sizeof (uint64_t)
+ + sizeof (uint64_t) * ((pi->num_syscalls + (8 * sizeof (uint64_t) - 1))
+ / (8 * sizeof (uint64_t)));
+#endif
+}
-LOCAL FUNCTION
+/* Function: sysset_t_alloc
+
+ Allocate and (partially) initialize a sysset_t struct. */
- lookupdesc -- translate a value to a summary desc string
+static sysset_t *
+sysset_t_alloc (procinfo * pi)
+{
+ sysset_t *ret;
+ int size = sysset_t_size (pi);
+ ret = xmalloc (size);
+#ifdef DYNAMIC_SYSCALLS
+ ret->pr_size = (pi->num_syscalls + (8 * sizeof (uint64_t) - 1))
+ / (8 * sizeof (uint64_t));
+#endif
+ return ret;
+}
-SYNOPSIS
+#ifdef DYNAMIC_SYSCALLS
- static char *lookupdesc (struct trans *transp, unsigned int val);
+/* Function: load_syscalls
+
+ Extract syscall numbers and names from /proc/<pid>/sysent. Initialize
+ pi->num_syscalls with the number of syscalls and pi->syscall_names
+ with the names. (Certain numbers may be skipped in which case the
+ names for these numbers will be left as NULL.) */
-DESCRIPTION
-
- Given a pointer to a translation table and a value to be translated,
- lookup the desc string and return it.
- */
+#define MAX_SYSCALL_NAME_LENGTH 256
+#define MAX_SYSCALLS 65536
-static char *
-lookupdesc (transp, val)
- struct trans *transp;
- unsigned int val;
+static void
+load_syscalls (procinfo *pi)
{
- char *desc;
-
- for (desc = NULL; transp -> name != NULL; transp++)
+ char pathname[MAX_PROC_NAME_SIZE];
+ int sysent_fd;
+ prsysent_t header;
+ prsyscall_t *syscalls;
+ int i, size, maxcall;
+
+ pi->num_syscalls = 0;
+ pi->syscall_names = 0;
+
+ /* Open the file descriptor for the sysent file */
+ sprintf (pathname, "/proc/%d/sysent", pi->pid);
+ sysent_fd = open_with_retry (pathname, O_RDONLY);
+ if (sysent_fd < 0)
{
- if (transp -> value == val)
- {
- desc = transp -> desc;
- break;
- }
+ error ("load_syscalls: Can't open /proc/%d/sysent", pi->pid);
}
- /* Didn't find a translation for the specified value, set a default one. */
+ size = sizeof header - sizeof (prsyscall_t);
+ if (read (sysent_fd, &header, size) != size)
+ {
+ error ("load_syscalls: Error reading /proc/%d/sysent", pi->pid);
+ }
- if (desc == NULL)
+ if (header.pr_nsyscalls == 0)
{
- desc = "Unknown";
+ error ("load_syscalls: /proc/%d/sysent contains no syscalls!", pi->pid);
}
- return (desc);
-}
-/*
+ size = header.pr_nsyscalls * sizeof (prsyscall_t);
+ syscalls = xmalloc (size);
-LOCAL FUNCTION
+ if (read (sysent_fd, syscalls, size) != size)
+ {
+ xfree (syscalls);
+ error ("load_syscalls: Error reading /proc/%d/sysent", pi->pid);
+ }
- lookupname -- translate a value to symbolic name
+ /* Find maximum syscall number. This may not be the same as
+ pr_nsyscalls since that value refers to the number of entries
+ in the table. (Also, the docs indicate that some system
+ call numbers may be skipped.) */
-SYNOPSIS
+ maxcall = syscalls[0].pr_number;
- static char *lookupname (struct trans *transp, unsigned int val,
- char *prefix);
+ for (i = 1; i < header.pr_nsyscalls; i++)
+ if (syscalls[i].pr_number > maxcall
+ && syscalls[i].pr_nameoff > 0
+ && syscalls[i].pr_number < MAX_SYSCALLS)
+ maxcall = syscalls[i].pr_number;
-DESCRIPTION
-
- Given a pointer to a translation table, a value to be translated,
- and a default prefix to return if the value can't be translated,
- match the value with one of the translation table entries and
- return a pointer to the symbolic name.
+ pi->num_syscalls = maxcall+1;
+ pi->syscall_names = xmalloc (pi->num_syscalls * sizeof (char *));
- If no match is found it just returns the value as a printable string,
- with the given prefix. The previous such value, if any, is freed
- at this time.
- */
+ for (i = 0; i < pi->num_syscalls; i++)
+ pi->syscall_names[i] = NULL;
-static char *
-lookupname (transp, val, prefix)
- struct trans *transp;
- unsigned int val;
- char *prefix;
-{
- static char *locbuf;
- char *name;
-
- for (name = NULL; transp -> name != NULL; transp++)
+ /* Read the syscall names in */
+ for (i = 0; i < header.pr_nsyscalls; i++)
{
- if (transp -> value == val)
- {
- name = transp -> name;
- break;
- }
- }
+ char namebuf[MAX_SYSCALL_NAME_LENGTH];
+ int nread;
+ int callnum;
- /* Didn't find a translation for the specified value, build a default
- one using the specified prefix and return it. The lifetime of
- the value is only until the next one is needed. */
+ if (syscalls[i].pr_number >= MAX_SYSCALLS
+ || syscalls[i].pr_number < 0
+ || syscalls[i].pr_nameoff <= 0
+ || (lseek (sysent_fd, (off_t) syscalls[i].pr_nameoff, SEEK_SET)
+ != (off_t) syscalls[i].pr_nameoff))
+ continue;
- if (name == NULL)
- {
- if (locbuf != NULL)
+ nread = read (sysent_fd, namebuf, sizeof namebuf);
+ if (nread <= 0)
+ continue;
+
+ callnum = syscalls[i].pr_number;
+
+ if (pi->syscall_names[callnum] != NULL)
{
- free (locbuf);
+ /* FIXME: Generate warning */
+ continue;
}
- locbuf = xmalloc (strlen (prefix) + 16);
- sprintf (locbuf, "%s %u", prefix, val);
- name = locbuf;
+
+ namebuf[nread-1] = '\0';
+ size = strlen (namebuf) + 1;
+ pi->syscall_names[callnum] = xmalloc (size);
+ strncpy (pi->syscall_names[callnum], namebuf, size-1);
+ pi->syscall_names[callnum][size-1] = '\0';
}
- return (name);
+
+ close (sysent_fd);
+ xfree (syscalls);
}
-static char *
-sigcodename (sip)
- siginfo_t *sip;
+/* Function: free_syscalls
+
+ Free the space allocated for the syscall names from the procinfo
+ structure. */
+
+static void
+free_syscalls (procinfo *pi)
{
- struct sigcode *scp;
- char *name = NULL;
- static char locbuf[32];
-
- for (scp = siginfo_table; scp -> codename != NULL; scp++)
- {
- if ((scp -> signo == sip -> si_signo) &&
- (scp -> code == sip -> si_code))
- {
- name = scp -> codename;
- break;
- }
- }
- if (name == NULL)
+ if (pi->syscall_names)
{
- sprintf (locbuf, "sigcode %u", sip -> si_signo);
- name = locbuf;
+ int i;
+
+ for (i = 0; i < pi->num_syscalls; i++)
+ if (pi->syscall_names[i] != NULL)
+ xfree (pi->syscall_names[i]);
+
+ xfree (pi->syscall_names);
+ pi->syscall_names = 0;
}
- return (name);
}
-static char *
-sigcodedesc (sip)
- siginfo_t *sip;
+/* Function: find_syscall
+
+ Given a name, look up (and return) the corresponding syscall number.
+ If no match is found, return -1. */
+
+static int
+find_syscall (procinfo *pi, char *name)
{
- struct sigcode *scp;
- char *desc = NULL;
-
- for (scp = siginfo_table; scp -> codename != NULL; scp++)
- {
- if ((scp -> signo == sip -> si_signo) &&
- (scp -> code == sip -> si_code))
- {
- desc = scp -> desc;
- break;
- }
- }
- if (desc == NULL)
+ int i;
+ for (i = 0; i < pi->num_syscalls; i++)
{
- desc = "Unrecognized signal or trap use";
+ if (pi->syscall_names[i] && strcmp (name, pi->syscall_names[i]) == 0)
+ return i;
}
- return (desc);
+ return -1;
}
+#endif
-/*
+/* =================== END, STRUCT PROCINFO "MODULE" =================== */
-LOCAL FUNCTION
+/* =================== /proc "MODULE" =================== */
- syscallname - translate a system call number into a system call name
+/*
+ * This "module" is the interface layer between the /proc system API
+ * and the gdb target vector functions. This layer consists of
+ * access functions that encapsulate each of the basic operations
+ * that we need to use from the /proc API.
+ *
+ * The main motivation for this layer is to hide the fact that
+ * there are two very different implementations of the /proc API.
+ * Rather than have a bunch of #ifdefs all thru the gdb target vector
+ * functions, we do our best to hide them all in here.
+ */
-SYNOPSIS
+int proc_get_status (procinfo * pi);
+long proc_flags (procinfo * pi);
+int proc_why (procinfo * pi);
+int proc_what (procinfo * pi);
+int proc_set_run_on_last_close (procinfo * pi);
+int proc_unset_run_on_last_close (procinfo * pi);
+int proc_set_inherit_on_fork (procinfo * pi);
+int proc_unset_inherit_on_fork (procinfo * pi);
+int proc_set_async (procinfo * pi);
+int proc_unset_async (procinfo * pi);
+int proc_stop_process (procinfo * pi);
+int proc_trace_signal (procinfo * pi, int signo);
+int proc_ignore_signal (procinfo * pi, int signo);
+int proc_clear_current_fault (procinfo * pi);
+int proc_set_current_signal (procinfo * pi, int signo);
+int proc_clear_current_signal (procinfo * pi);
+int proc_set_gregs (procinfo * pi);
+int proc_set_fpregs (procinfo * pi);
+int proc_wait_for_stop (procinfo * pi);
+int proc_run_process (procinfo * pi, int step, int signo);
+int proc_kill (procinfo * pi, int signo);
+int proc_parent_pid (procinfo * pi);
+int proc_get_nthreads (procinfo * pi);
+int proc_get_current_thread (procinfo * pi);
+int proc_set_held_signals (procinfo * pi, gdb_sigset_t * sighold);
+int proc_set_traced_sysexit (procinfo * pi, sysset_t * sysset);
+int proc_set_traced_sysentry (procinfo * pi, sysset_t * sysset);
+int proc_set_traced_faults (procinfo * pi, fltset_t * fltset);
+int proc_set_traced_signals (procinfo * pi, gdb_sigset_t * sigset);
+
+int proc_update_threads (procinfo * pi);
+int proc_iterate_over_threads (procinfo * pi,
+ int (*func) (procinfo *, procinfo *, void *),
+ void *ptr);
+
+gdb_gregset_t *proc_get_gregs (procinfo * pi);
+gdb_fpregset_t *proc_get_fpregs (procinfo * pi);
+sysset_t *proc_get_traced_sysexit (procinfo * pi, sysset_t * save);
+sysset_t *proc_get_traced_sysentry (procinfo * pi, sysset_t * save);
+fltset_t *proc_get_traced_faults (procinfo * pi, fltset_t * save);
+gdb_sigset_t *proc_get_traced_signals (procinfo * pi, gdb_sigset_t * save);
+gdb_sigset_t *proc_get_held_signals (procinfo * pi, gdb_sigset_t * save);
+gdb_sigset_t *proc_get_pending_signals (procinfo * pi, gdb_sigset_t * save);
+gdb_sigaction_t *proc_get_signal_actions (procinfo * pi, gdb_sigaction_t *save);
+
+void proc_warn (procinfo * pi, char *func, int line);
+void proc_error (procinfo * pi, char *func, int line);
- char *syscallname (int syscallnum)
+void
+proc_warn (procinfo *pi, char *func, int line)
+{
+ sprintf (errmsg, "procfs: %s line %d, %s", func, line, pi->pathname);
+ print_sys_errmsg (errmsg, errno);
+}
-DESCRIPTION
+void
+proc_error (procinfo *pi, char *func, int line)
+{
+ sprintf (errmsg, "procfs: %s line %d, %s", func, line, pi->pathname);
+ perror_with_name (errmsg);
+}
- Given a system call number, translate it into the printable name
- of a system call, or into "syscall <num>" if it is an unknown
- number.
+/*
+ * Function: proc_get_status
+ *
+ * Updates the status struct in the procinfo.
+ * There is a 'valid' flag, to let other functions know when
+ * this function needs to be called (so the status is only
+ * read when it is needed). The status file descriptor is
+ * also only opened when it is needed.
+ *
+ * Return: non-zero for success, zero for failure.
*/
-static char *
-syscallname (syscallnum)
- int syscallnum;
+int
+proc_get_status (procinfo *pi)
{
- static char locbuf[32];
- char *rtnval;
-
- if (syscallnum >= 0 && syscallnum < MAX_SYSCALLS)
+ /* Status file descriptor is opened "lazily" */
+ if (pi->status_fd == 0 &&
+ open_procinfo_files (pi, FD_STATUS) == 0)
{
- rtnval = syscall_table[syscallnum];
+ pi->status_valid = 0;
+ return 0;
}
+
+#ifdef NEW_PROC_API
+ if (lseek (pi->status_fd, 0, SEEK_SET) < 0)
+ pi->status_valid = 0; /* fail */
else
{
- sprintf (locbuf, "syscall %u", syscallnum);
- rtnval = locbuf;
+ /* Sigh... I have to read a different data structure,
+ depending on whether this is a main process or an LWP. */
+ if (pi->tid)
+ pi->status_valid = (read (pi->status_fd,
+ (char *) &pi->prstatus.pr_lwp,
+ sizeof (lwpstatus_t))
+ == sizeof (lwpstatus_t));
+ else
+ {
+ pi->status_valid = (read (pi->status_fd,
+ (char *) &pi->prstatus,
+ sizeof (gdb_prstatus_t))
+ == sizeof (gdb_prstatus_t));
+#if 0 /*def UNIXWARE*/
+ if (pi->status_valid &&
+ (pi->prstatus.pr_lwp.pr_flags & PR_ISTOP) &&
+ pi->prstatus.pr_lwp.pr_why == PR_REQUESTED)
+ /* Unixware peculiarity -- read the damn thing again! */
+ pi->status_valid = (read (pi->status_fd,
+ (char *) &pi->prstatus,
+ sizeof (gdb_prstatus_t))
+ == sizeof (gdb_prstatus_t));
+#endif /* UNIXWARE */
+ }
+ }
+#else /* ioctl method */
+#ifdef PIOCTSTATUS /* osf */
+ if (pi->tid == 0) /* main process */
+ {
+ /* Just read the danged status. Now isn't that simple? */
+ pi->status_valid =
+ (ioctl (pi->status_fd, PIOCSTATUS, &pi->prstatus) >= 0);
}
- return (rtnval);
+ else
+ {
+ int win;
+ struct {
+ long pr_count;
+ tid_t pr_error_thread;
+ struct prstatus status;
+ } thread_status;
+
+ thread_status.pr_count = 1;
+ thread_status.status.pr_tid = pi->tid;
+ win = (ioctl (pi->status_fd, PIOCTSTATUS, &thread_status) >= 0);
+ if (win)
+ {
+ memcpy (&pi->prstatus, &thread_status.status,
+ sizeof (pi->prstatus));
+ pi->status_valid = 1;
+ }
+ }
+#else
+ /* Just read the danged status. Now isn't that simple? */
+ pi->status_valid = (ioctl (pi->status_fd, PIOCSTATUS, &pi->prstatus) >= 0);
+#endif
+#endif
+
+ if (pi->status_valid)
+ {
+ PROC_PRETTYFPRINT_STATUS (proc_flags (pi),
+ proc_why (pi),
+ proc_what (pi),
+ proc_get_current_thread (pi));
+ }
+
+ /* The status struct includes general regs, so mark them valid too */
+ pi->gregs_valid = pi->status_valid;
+#ifdef NEW_PROC_API
+ /* In the read/write multiple-fd model,
+ the status struct includes the fp regs too, so mark them valid too */
+ pi->fpregs_valid = pi->status_valid;
+#endif
+ return pi->status_valid; /* True if success, false if failure. */
}
/*
+ * Function: proc_flags
+ *
+ * returns the process flags (pr_flags field).
+ */
-LOCAL FUNCTION
+long
+proc_flags (procinfo *pi)
+{
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0; /* FIXME: not a good failure value (but what is?) */
+
+#ifdef NEW_PROC_API
+# ifdef UNIXWARE
+ /* UnixWare 7.1 puts process status flags, e.g. PR_ASYNC, in
+ pstatus_t and LWP status flags, e.g. PR_STOPPED, in lwpstatus_t.
+ The two sets of flags don't overlap. */
+ return pi->prstatus.pr_flags | pi->prstatus.pr_lwp.pr_flags;
+# else
+ return pi->prstatus.pr_lwp.pr_flags;
+# endif
+#else
+ return pi->prstatus.pr_flags;
+#endif
+}
- init_syscall_table - initialize syscall translation table
+/*
+ * Function: proc_why
+ *
+ * returns the pr_why field (why the process stopped).
+ */
-SYNOPSIS
+int
+proc_why (procinfo *pi)
+{
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0; /* FIXME: not a good failure value (but what is?) */
- void init_syscall_table (void)
+#ifdef NEW_PROC_API
+ return pi->prstatus.pr_lwp.pr_why;
+#else
+ return pi->prstatus.pr_why;
+#endif
+}
-DESCRIPTION
+/*
+ * Function: proc_what
+ *
+ * returns the pr_what field (details of why the process stopped).
+ */
- Dynamically initialize the translation table to convert system
- call numbers into printable system call names. Done once per
- gdb run, on initialization.
+int
+proc_what (procinfo *pi)
+{
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0; /* FIXME: not a good failure value (but what is?) */
-NOTES
+#ifdef NEW_PROC_API
+ return pi->prstatus.pr_lwp.pr_what;
+#else
+ return pi->prstatus.pr_what;
+#endif
+}
- This is awfully ugly, but preprocessor tricks to make it prettier
- tend to be nonportable.
+#ifndef PIOCSSPCACT /* The following is not supported on OSF. */
+/*
+ * Function: proc_nsysarg
+ *
+ * returns the pr_nsysarg field (number of args to the current syscall).
*/
-static void
-init_syscall_table ()
+int
+proc_nsysarg (procinfo *pi)
{
-#if defined (SYS_exit)
- syscall_table[SYS_exit] = "exit";
-#endif
-#if defined (SYS_fork)
- syscall_table[SYS_fork] = "fork";
-#endif
-#if defined (SYS_read)
- syscall_table[SYS_read] = "read";
-#endif
-#if defined (SYS_write)
- syscall_table[SYS_write] = "write";
-#endif
-#if defined (SYS_open)
- syscall_table[SYS_open] = "open";
-#endif
-#if defined (SYS_close)
- syscall_table[SYS_close] = "close";
-#endif
-#if defined (SYS_wait)
- syscall_table[SYS_wait] = "wait";
-#endif
-#if defined (SYS_creat)
- syscall_table[SYS_creat] = "creat";
-#endif
-#if defined (SYS_link)
- syscall_table[SYS_link] = "link";
-#endif
-#if defined (SYS_unlink)
- syscall_table[SYS_unlink] = "unlink";
-#endif
-#if defined (SYS_exec)
- syscall_table[SYS_exec] = "exec";
-#endif
-#if defined (SYS_execv)
- syscall_table[SYS_execv] = "execv";
-#endif
-#if defined (SYS_execve)
- syscall_table[SYS_execve] = "execve";
-#endif
-#if defined (SYS_chdir)
- syscall_table[SYS_chdir] = "chdir";
-#endif
-#if defined (SYS_time)
- syscall_table[SYS_time] = "time";
-#endif
-#if defined (SYS_mknod)
- syscall_table[SYS_mknod] = "mknod";
-#endif
-#if defined (SYS_chmod)
- syscall_table[SYS_chmod] = "chmod";
-#endif
-#if defined (SYS_chown)
- syscall_table[SYS_chown] = "chown";
-#endif
-#if defined (SYS_brk)
- syscall_table[SYS_brk] = "brk";
-#endif
-#if defined (SYS_stat)
- syscall_table[SYS_stat] = "stat";
-#endif
-#if defined (SYS_lseek)
- syscall_table[SYS_lseek] = "lseek";
-#endif
-#if defined (SYS_getpid)
- syscall_table[SYS_getpid] = "getpid";
-#endif
-#if defined (SYS_mount)
- syscall_table[SYS_mount] = "mount";
-#endif
-#if defined (SYS_umount)
- syscall_table[SYS_umount] = "umount";
-#endif
-#if defined (SYS_setuid)
- syscall_table[SYS_setuid] = "setuid";
-#endif
-#if defined (SYS_getuid)
- syscall_table[SYS_getuid] = "getuid";
-#endif
-#if defined (SYS_stime)
- syscall_table[SYS_stime] = "stime";
-#endif
-#if defined (SYS_ptrace)
- syscall_table[SYS_ptrace] = "ptrace";
-#endif
-#if defined (SYS_alarm)
- syscall_table[SYS_alarm] = "alarm";
-#endif
-#if defined (SYS_fstat)
- syscall_table[SYS_fstat] = "fstat";
-#endif
-#if defined (SYS_pause)
- syscall_table[SYS_pause] = "pause";
-#endif
-#if defined (SYS_utime)
- syscall_table[SYS_utime] = "utime";
-#endif
-#if defined (SYS_stty)
- syscall_table[SYS_stty] = "stty";
-#endif
-#if defined (SYS_gtty)
- syscall_table[SYS_gtty] = "gtty";
-#endif
-#if defined (SYS_access)
- syscall_table[SYS_access] = "access";
-#endif
-#if defined (SYS_nice)
- syscall_table[SYS_nice] = "nice";
-#endif
-#if defined (SYS_statfs)
- syscall_table[SYS_statfs] = "statfs";
-#endif
-#if defined (SYS_sync)
- syscall_table[SYS_sync] = "sync";
-#endif
-#if defined (SYS_kill)
- syscall_table[SYS_kill] = "kill";
-#endif
-#if defined (SYS_fstatfs)
- syscall_table[SYS_fstatfs] = "fstatfs";
-#endif
-#if defined (SYS_pgrpsys)
- syscall_table[SYS_pgrpsys] = "pgrpsys";
-#endif
-#if defined (SYS_xenix)
- syscall_table[SYS_xenix] = "xenix";
-#endif
-#if defined (SYS_dup)
- syscall_table[SYS_dup] = "dup";
-#endif
-#if defined (SYS_pipe)
- syscall_table[SYS_pipe] = "pipe";
-#endif
-#if defined (SYS_times)
- syscall_table[SYS_times] = "times";
-#endif
-#if defined (SYS_profil)
- syscall_table[SYS_profil] = "profil";
-#endif
-#if defined (SYS_plock)
- syscall_table[SYS_plock] = "plock";
-#endif
-#if defined (SYS_setgid)
- syscall_table[SYS_setgid] = "setgid";
-#endif
-#if defined (SYS_getgid)
- syscall_table[SYS_getgid] = "getgid";
-#endif
-#if defined (SYS_signal)
- syscall_table[SYS_signal] = "signal";
-#endif
-#if defined (SYS_msgsys)
- syscall_table[SYS_msgsys] = "msgsys";
-#endif
-#if defined (SYS_sys3b)
- syscall_table[SYS_sys3b] = "sys3b";
-#endif
-#if defined (SYS_acct)
- syscall_table[SYS_acct] = "acct";
-#endif
-#if defined (SYS_shmsys)
- syscall_table[SYS_shmsys] = "shmsys";
-#endif
-#if defined (SYS_semsys)
- syscall_table[SYS_semsys] = "semsys";
-#endif
-#if defined (SYS_ioctl)
- syscall_table[SYS_ioctl] = "ioctl";
-#endif
-#if defined (SYS_uadmin)
- syscall_table[SYS_uadmin] = "uadmin";
-#endif
-#if defined (SYS_utssys)
- syscall_table[SYS_utssys] = "utssys";
-#endif
-#if defined (SYS_fsync)
- syscall_table[SYS_fsync] = "fsync";
-#endif
-#if defined (SYS_umask)
- syscall_table[SYS_umask] = "umask";
-#endif
-#if defined (SYS_chroot)
- syscall_table[SYS_chroot] = "chroot";
-#endif
-#if defined (SYS_fcntl)
- syscall_table[SYS_fcntl] = "fcntl";
-#endif
-#if defined (SYS_ulimit)
- syscall_table[SYS_ulimit] = "ulimit";
-#endif
-#if defined (SYS_rfsys)
- syscall_table[SYS_rfsys] = "rfsys";
-#endif
-#if defined (SYS_rmdir)
- syscall_table[SYS_rmdir] = "rmdir";
-#endif
-#if defined (SYS_mkdir)
- syscall_table[SYS_mkdir] = "mkdir";
-#endif
-#if defined (SYS_getdents)
- syscall_table[SYS_getdents] = "getdents";
-#endif
-#if defined (SYS_sysfs)
- syscall_table[SYS_sysfs] = "sysfs";
-#endif
-#if defined (SYS_getmsg)
- syscall_table[SYS_getmsg] = "getmsg";
-#endif
-#if defined (SYS_putmsg)
- syscall_table[SYS_putmsg] = "putmsg";
-#endif
-#if defined (SYS_poll)
- syscall_table[SYS_poll] = "poll";
-#endif
-#if defined (SYS_lstat)
- syscall_table[SYS_lstat] = "lstat";
-#endif
-#if defined (SYS_symlink)
- syscall_table[SYS_symlink] = "symlink";
-#endif
-#if defined (SYS_readlink)
- syscall_table[SYS_readlink] = "readlink";
-#endif
-#if defined (SYS_setgroups)
- syscall_table[SYS_setgroups] = "setgroups";
-#endif
-#if defined (SYS_getgroups)
- syscall_table[SYS_getgroups] = "getgroups";
-#endif
-#if defined (SYS_fchmod)
- syscall_table[SYS_fchmod] = "fchmod";
-#endif
-#if defined (SYS_fchown)
- syscall_table[SYS_fchown] = "fchown";
-#endif
-#if defined (SYS_sigprocmask)
- syscall_table[SYS_sigprocmask] = "sigprocmask";
-#endif
-#if defined (SYS_sigsuspend)
- syscall_table[SYS_sigsuspend] = "sigsuspend";
-#endif
-#if defined (SYS_sigaltstack)
- syscall_table[SYS_sigaltstack] = "sigaltstack";
-#endif
-#if defined (SYS_sigaction)
- syscall_table[SYS_sigaction] = "sigaction";
-#endif
-#if defined (SYS_sigpending)
- syscall_table[SYS_sigpending] = "sigpending";
-#endif
-#if defined (SYS_context)
- syscall_table[SYS_context] = "context";
-#endif
-#if defined (SYS_evsys)
- syscall_table[SYS_evsys] = "evsys";
-#endif
-#if defined (SYS_evtrapret)
- syscall_table[SYS_evtrapret] = "evtrapret";
-#endif
-#if defined (SYS_statvfs)
- syscall_table[SYS_statvfs] = "statvfs";
-#endif
-#if defined (SYS_fstatvfs)
- syscall_table[SYS_fstatvfs] = "fstatvfs";
-#endif
-#if defined (SYS_nfssys)
- syscall_table[SYS_nfssys] = "nfssys";
-#endif
-#if defined (SYS_waitsys)
- syscall_table[SYS_waitsys] = "waitsys";
-#endif
-#if defined (SYS_sigsendsys)
- syscall_table[SYS_sigsendsys] = "sigsendsys";
-#endif
-#if defined (SYS_hrtsys)
- syscall_table[SYS_hrtsys] = "hrtsys";
-#endif
-#if defined (SYS_acancel)
- syscall_table[SYS_acancel] = "acancel";
-#endif
-#if defined (SYS_async)
- syscall_table[SYS_async] = "async";
-#endif
-#if defined (SYS_priocntlsys)
- syscall_table[SYS_priocntlsys] = "priocntlsys";
-#endif
-#if defined (SYS_pathconf)
- syscall_table[SYS_pathconf] = "pathconf";
-#endif
-#if defined (SYS_mincore)
- syscall_table[SYS_mincore] = "mincore";
-#endif
-#if defined (SYS_mmap)
- syscall_table[SYS_mmap] = "mmap";
-#endif
-#if defined (SYS_mprotect)
- syscall_table[SYS_mprotect] = "mprotect";
-#endif
-#if defined (SYS_munmap)
- syscall_table[SYS_munmap] = "munmap";
-#endif
-#if defined (SYS_fpathconf)
- syscall_table[SYS_fpathconf] = "fpathconf";
-#endif
-#if defined (SYS_vfork)
- syscall_table[SYS_vfork] = "vfork";
-#endif
-#if defined (SYS_fchdir)
- syscall_table[SYS_fchdir] = "fchdir";
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0;
+
+#ifdef NEW_PROC_API
+ return pi->prstatus.pr_lwp.pr_nsysarg;
+#else
+ return pi->prstatus.pr_nsysarg;
#endif
-#if defined (SYS_readv)
- syscall_table[SYS_readv] = "readv";
+}
+
+/*
+ * Function: proc_sysargs
+ *
+ * returns the pr_sysarg field (pointer to the arguments of current syscall).
+ */
+
+long *
+proc_sysargs (procinfo *pi)
+{
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
+
+#ifdef NEW_PROC_API
+ return (long *) &pi->prstatus.pr_lwp.pr_sysarg;
+#else
+ return (long *) &pi->prstatus.pr_sysarg;
#endif
-#if defined (SYS_writev)
- syscall_table[SYS_writev] = "writev";
+}
+
+/*
+ * Function: proc_syscall
+ *
+ * returns the pr_syscall field (id of current syscall if we are in one).
+ */
+
+int
+proc_syscall (procinfo *pi)
+{
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0;
+
+#ifdef NEW_PROC_API
+ return pi->prstatus.pr_lwp.pr_syscall;
+#else
+ return pi->prstatus.pr_syscall;
#endif
-#if defined (SYS_xstat)
- syscall_table[SYS_xstat] = "xstat";
+}
+#endif /* PIOCSSPCACT */
+
+/*
+ * Function: proc_cursig:
+ *
+ * returns the pr_cursig field (current signal).
+ */
+
+long
+proc_cursig (struct procinfo *pi)
+{
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0; /* FIXME: not a good failure value (but what is?) */
+
+#ifdef NEW_PROC_API
+ return pi->prstatus.pr_lwp.pr_cursig;
+#else
+ return pi->prstatus.pr_cursig;
#endif
-#if defined (SYS_lxstat)
- syscall_table[SYS_lxstat] = "lxstat";
+}
+
+/*
+ * Function: proc_modify_flag
+ *
+ * === I appologize for the messiness of this function.
+ * === This is an area where the different versions of
+ * === /proc are more inconsistent than usual. MVS
+ *
+ * Set or reset any of the following process flags:
+ * PR_FORK -- forked child will inherit trace flags
+ * PR_RLC -- traced process runs when last /proc file closed.
+ * PR_KLC -- traced process is killed when last /proc file closed.
+ * PR_ASYNC -- LWP's get to run/stop independently.
+ *
+ * There are three methods for doing this function:
+ * 1) Newest: read/write [PCSET/PCRESET/PCUNSET]
+ * [Sol6, Sol7, UW]
+ * 2) Middle: PIOCSET/PIOCRESET
+ * [Irix, Sol5]
+ * 3) Oldest: PIOCSFORK/PIOCRFORK/PIOCSRLC/PIOCRRLC
+ * [OSF, Sol5]
+ *
+ * Note: Irix does not define PR_ASYNC.
+ * Note: OSF does not define PR_KLC.
+ * Note: OSF is the only one that can ONLY use the oldest method.
+ *
+ * Arguments:
+ * pi -- the procinfo
+ * flag -- one of PR_FORK, PR_RLC, or PR_ASYNC
+ * mode -- 1 for set, 0 for reset.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
+
+enum { FLAG_RESET, FLAG_SET };
+
+static int
+proc_modify_flag (procinfo *pi, long flag, long mode)
+{
+ long win = 0; /* default to fail */
+
+ /*
+ * These operations affect the process as a whole, and applying
+ * them to an individual LWP has the same meaning as applying them
+ * to the main process. Therefore, if we're ever called with a
+ * pointer to an LWP's procinfo, let's substitute the process's
+ * procinfo and avoid opening the LWP's file descriptor
+ * unnecessarily.
+ */
+
+ if (pi->pid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+#ifdef NEW_PROC_API /* Newest method: UnixWare and newer Solarii */
+ /* First normalize the PCUNSET/PCRESET command opcode
+ (which for no obvious reason has a different definition
+ from one operating system to the next...) */
+#ifdef PCUNSET
+#define GDBRESET PCUNSET
+#else
+#ifdef PCRESET
+#define GDBRESET PCRESET
#endif
-#if defined (SYS_fxstat)
- syscall_table[SYS_fxstat] = "fxstat";
#endif
-#if defined (SYS_xmknod)
- syscall_table[SYS_xmknod] = "xmknod";
+ {
+ procfs_ctl_t arg[2];
+
+ if (mode == FLAG_SET) /* Set the flag (RLC, FORK, or ASYNC) */
+ arg[0] = PCSET;
+ else /* Reset the flag */
+ arg[0] = GDBRESET;
+
+ arg[1] = flag;
+ win = (write (pi->ctl_fd, (void *) &arg, sizeof (arg)) == sizeof (arg));
+ }
+#else
+#ifdef PIOCSET /* Irix/Sol5 method */
+ if (mode == FLAG_SET) /* Set the flag (hopefully RLC, FORK, or ASYNC) */
+ {
+ win = (ioctl (pi->ctl_fd, PIOCSET, &flag) >= 0);
+ }
+ else /* Reset the flag */
+ {
+ win = (ioctl (pi->ctl_fd, PIOCRESET, &flag) >= 0);
+ }
+
+#else
+#ifdef PIOCSRLC /* Oldest method: OSF */
+ switch (flag) {
+ case PR_RLC:
+ if (mode == FLAG_SET) /* Set run-on-last-close */
+ {
+ win = (ioctl (pi->ctl_fd, PIOCSRLC, NULL) >= 0);
+ }
+ else /* Clear run-on-last-close */
+ {
+ win = (ioctl (pi->ctl_fd, PIOCRRLC, NULL) >= 0);
+ }
+ break;
+ case PR_FORK:
+ if (mode == FLAG_SET) /* Set inherit-on-fork */
+ {
+ win = (ioctl (pi->ctl_fd, PIOCSFORK, NULL) >= 0);
+ }
+ else /* Clear inherit-on-fork */
+ {
+ win = (ioctl (pi->ctl_fd, PIOCRFORK, NULL) >= 0);
+ }
+ break;
+ default:
+ win = 0; /* fail -- unknown flag (can't do PR_ASYNC) */
+ break;
+ }
#endif
-#if defined (SYS_clocal)
- syscall_table[SYS_clocal] = "clocal";
#endif
-#if defined (SYS_setrlimit)
- syscall_table[SYS_setrlimit] = "setrlimit";
#endif
-#if defined (SYS_getrlimit)
- syscall_table[SYS_getrlimit] = "getrlimit";
+#undef GDBRESET
+ /* The above operation renders the procinfo's cached pstatus obsolete. */
+ pi->status_valid = 0;
+
+ if (!win)
+ warning ("procfs: modify_flag failed to turn %s %s",
+ flag == PR_FORK ? "PR_FORK" :
+ flag == PR_RLC ? "PR_RLC" :
+#ifdef PR_ASYNC
+ flag == PR_ASYNC ? "PR_ASYNC" :
#endif
-#if defined (SYS_lchown)
- syscall_table[SYS_lchown] = "lchown";
+#ifdef PR_KLC
+ flag == PR_KLC ? "PR_KLC" :
#endif
-#if defined (SYS_memcntl)
- syscall_table[SYS_memcntl] = "memcntl";
+ "<unknown flag>",
+ mode == FLAG_RESET ? "off" : "on");
+
+ return win;
+}
+
+/*
+ * Function: proc_set_run_on_last_close
+ *
+ * Set the run_on_last_close flag.
+ * Process with all threads will become runnable
+ * when debugger closes all /proc fds.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_set_run_on_last_close (procinfo *pi)
+{
+ return proc_modify_flag (pi, PR_RLC, FLAG_SET);
+}
+
+/*
+ * Function: proc_unset_run_on_last_close
+ *
+ * Reset the run_on_last_close flag.
+ * Process will NOT become runnable
+ * when debugger closes its file handles.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_unset_run_on_last_close (procinfo *pi)
+{
+ return proc_modify_flag (pi, PR_RLC, FLAG_RESET);
+}
+
+#ifdef PR_KLC
+/*
+ * Function: proc_set_kill_on_last_close
+ *
+ * Set the kill_on_last_close flag.
+ * Process with all threads will be killed when debugger
+ * closes all /proc fds (or debugger exits or dies).
+ *
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_set_kill_on_last_close (procinfo *pi)
+{
+ return proc_modify_flag (pi, PR_KLC, FLAG_SET);
+}
+
+/*
+ * Function: proc_unset_kill_on_last_close
+ *
+ * Reset the kill_on_last_close flag.
+ * Process will NOT be killed when debugger
+ * closes its file handles (or exits or dies).
+ *
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_unset_kill_on_last_close (procinfo *pi)
+{
+ return proc_modify_flag (pi, PR_KLC, FLAG_RESET);
+}
+#endif /* PR_KLC */
+
+/*
+ * Function: proc_set_inherit_on_fork
+ *
+ * Set inherit_on_fork flag.
+ * If the process forks a child while we are registered for events
+ * in the parent, then we will also recieve events from the child.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_set_inherit_on_fork (procinfo *pi)
+{
+ return proc_modify_flag (pi, PR_FORK, FLAG_SET);
+}
+
+/*
+ * Function: proc_unset_inherit_on_fork
+ *
+ * Reset inherit_on_fork flag.
+ * If the process forks a child while we are registered for events
+ * in the parent, then we will NOT recieve events from the child.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_unset_inherit_on_fork (procinfo *pi)
+{
+ return proc_modify_flag (pi, PR_FORK, FLAG_RESET);
+}
+
+#ifdef PR_ASYNC
+/*
+ * Function: proc_set_async
+ *
+ * Set PR_ASYNC flag.
+ * If one LWP stops because of a debug event (signal etc.),
+ * the remaining LWPs will continue to run.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_set_async (procinfo *pi)
+{
+ return proc_modify_flag (pi, PR_ASYNC, FLAG_SET);
+}
+
+/*
+ * Function: proc_unset_async
+ *
+ * Reset PR_ASYNC flag.
+ * If one LWP stops because of a debug event (signal etc.),
+ * then all other LWPs will stop as well.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_unset_async (procinfo *pi)
+{
+ return proc_modify_flag (pi, PR_ASYNC, FLAG_RESET);
+}
+#endif /* PR_ASYNC */
+
+/*
+ * Function: proc_stop_process
+ *
+ * Request the process/LWP to stop. Does not wait.
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_stop_process (procinfo *pi)
+{
+ int win;
+
+ /*
+ * We might conceivably apply this operation to an LWP, and
+ * the LWP's ctl file descriptor might not be open.
+ */
+
+ if (pi->ctl_fd == 0 &&
+ open_procinfo_files (pi, FD_CTL) == 0)
+ return 0;
+ else
+ {
+#ifdef NEW_PROC_API
+ procfs_ctl_t cmd = PCSTOP;
+ win = (write (pi->ctl_fd, (char *) &cmd, sizeof (cmd)) == sizeof (cmd));
+#else /* ioctl method */
+ win = (ioctl (pi->ctl_fd, PIOCSTOP, &pi->prstatus) >= 0);
+ /* Note: the call also reads the prstatus. */
+ if (win)
+ {
+ pi->status_valid = 1;
+ PROC_PRETTYFPRINT_STATUS (proc_flags (pi),
+ proc_why (pi),
+ proc_what (pi),
+ proc_get_current_thread (pi));
+ }
#endif
-#if defined (SYS_getpmsg)
- syscall_table[SYS_getpmsg] = "getpmsg";
+ }
+
+ return win;
+}
+
+/*
+ * Function: proc_wait_for_stop
+ *
+ * Wait for the process or LWP to stop (block until it does).
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_wait_for_stop (procinfo *pi)
+{
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+#ifdef NEW_PROC_API
+ {
+ procfs_ctl_t cmd = PCWSTOP;
+ win = (write (pi->ctl_fd, (char *) &cmd, sizeof (cmd)) == sizeof (cmd));
+ /* We been runnin' and we stopped -- need to update status. */
+ pi->status_valid = 0;
+ }
+#else /* ioctl method */
+ win = (ioctl (pi->ctl_fd, PIOCWSTOP, &pi->prstatus) >= 0);
+ /* Above call also refreshes the prstatus. */
+ if (win)
+ {
+ pi->status_valid = 1;
+ PROC_PRETTYFPRINT_STATUS (proc_flags (pi),
+ proc_why (pi),
+ proc_what (pi),
+ proc_get_current_thread (pi));
+ }
#endif
-#if defined (SYS_putpmsg)
- syscall_table[SYS_putpmsg] = "putpmsg";
+
+ return win;
+}
+
+/*
+ * Function: proc_run_process
+ *
+ * Make the process or LWP runnable.
+ * Options (not all are implemented):
+ * - single-step
+ * - clear current fault
+ * - clear current signal
+ * - abort the current system call
+ * - stop as soon as finished with system call
+ * - (ioctl): set traced signal set
+ * - (ioctl): set held signal set
+ * - (ioctl): set traced fault set
+ * - (ioctl): set start pc (vaddr)
+ * Always clear the current fault.
+ * Clear the current signal if 'signo' is zero.
+ *
+ * Arguments:
+ * pi the process or LWP to operate on.
+ * step if true, set the process or LWP to trap after one instr.
+ * signo if zero, clear the current signal if any.
+ * if non-zero, set the current signal to this one.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_run_process (procinfo *pi, int step, int signo)
+{
+ int win;
+ int runflags;
+
+ /*
+ * We will probably have to apply this operation to individual threads,
+ * so make sure the control file descriptor is open.
+ */
+
+ if (pi->ctl_fd == 0 &&
+ open_procinfo_files (pi, FD_CTL) == 0)
+ {
+ return 0;
+ }
+
+ runflags = PRCFAULT; /* always clear current fault */
+ if (step)
+ runflags |= PRSTEP;
+ if (signo == 0)
+ runflags |= PRCSIG;
+ else if (signo != -1) /* -1 means do nothing W.R.T. signals */
+ proc_set_current_signal (pi, signo);
+
+#ifdef NEW_PROC_API
+ {
+ procfs_ctl_t cmd[2];
+
+ cmd[0] = PCRUN;
+ cmd[1] = runflags;
+ win = (write (pi->ctl_fd, (char *) &cmd, sizeof (cmd)) == sizeof (cmd));
+ }
+#else /* ioctl method */
+ {
+ prrun_t prrun;
+
+ memset (&prrun, 0, sizeof (prrun));
+ prrun.pr_flags = runflags;
+ win = (ioctl (pi->ctl_fd, PIOCRUN, &prrun) >= 0);
+ }
#endif
-#if defined (SYS_rename)
- syscall_table[SYS_rename] = "rename";
+
+ return win;
+}
+
+/*
+ * Function: proc_set_traced_signals
+ *
+ * Register to trace signals in the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_set_traced_signals (procinfo *pi, gdb_sigset_t *sigset)
+{
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+#ifdef NEW_PROC_API
+ {
+ struct {
+ procfs_ctl_t cmd;
+ /* Use char array to avoid alignment issues. */
+ char sigset[sizeof (gdb_sigset_t)];
+ } arg;
+
+ arg.cmd = PCSTRACE;
+ memcpy (&arg.sigset, sigset, sizeof (gdb_sigset_t));
+
+ win = (write (pi->ctl_fd, (char *) &arg, sizeof (arg)) == sizeof (arg));
+ }
+#else /* ioctl method */
+ win = (ioctl (pi->ctl_fd, PIOCSTRACE, sigset) >= 0);
#endif
-#if defined (SYS_uname)
- syscall_table[SYS_uname] = "uname";
+ /* The above operation renders the procinfo's cached pstatus obsolete. */
+ pi->status_valid = 0;
+
+ if (!win)
+ warning ("procfs: set_traced_signals failed");
+ return win;
+}
+
+/*
+ * Function: proc_set_traced_faults
+ *
+ * Register to trace hardware faults in the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_set_traced_faults (procinfo *pi, fltset_t *fltset)
+{
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+#ifdef NEW_PROC_API
+ {
+ struct {
+ procfs_ctl_t cmd;
+ /* Use char array to avoid alignment issues. */
+ char fltset[sizeof (fltset_t)];
+ } arg;
+
+ arg.cmd = PCSFAULT;
+ memcpy (&arg.fltset, fltset, sizeof (fltset_t));
+
+ win = (write (pi->ctl_fd, (char *) &arg, sizeof (arg)) == sizeof (arg));
+ }
+#else /* ioctl method */
+ win = (ioctl (pi->ctl_fd, PIOCSFAULT, fltset) >= 0);
#endif
-#if defined (SYS_setegid)
- syscall_table[SYS_setegid] = "setegid";
+ /* The above operation renders the procinfo's cached pstatus obsolete. */
+ pi->status_valid = 0;
+
+ return win;
+}
+
+/*
+ * Function: proc_set_traced_sysentry
+ *
+ * Register to trace entry to system calls in the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_set_traced_sysentry (procinfo *pi, sysset_t *sysset)
+{
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+#ifdef NEW_PROC_API
+ {
+ struct gdb_proc_ctl_pcsentry {
+ procfs_ctl_t cmd;
+ /* Use char array to avoid alignment issues. */
+ char sysset[sizeof (sysset_t)];
+ } *argp;
+ int argp_size = sizeof (struct gdb_proc_ctl_pcsentry)
+ - sizeof (sysset_t)
+ + sysset_t_size (pi);
+
+ argp = xmalloc (argp_size);
+
+ argp->cmd = PCSENTRY;
+ memcpy (&argp->sysset, sysset, sysset_t_size (pi));
+
+ win = (write (pi->ctl_fd, (char *) argp, argp_size) == argp_size);
+ xfree (argp);
+ }
+#else /* ioctl method */
+ win = (ioctl (pi->ctl_fd, PIOCSENTRY, sysset) >= 0);
#endif
-#if defined (SYS_sysconfig)
- syscall_table[SYS_sysconfig] = "sysconfig";
+ /* The above operation renders the procinfo's cached pstatus obsolete. */
+ pi->status_valid = 0;
+
+ return win;
+}
+
+/*
+ * Function: proc_set_traced_sysexit
+ *
+ * Register to trace exit from system calls in the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_set_traced_sysexit (procinfo *pi, sysset_t *sysset)
+{
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+#ifdef NEW_PROC_API
+ {
+ struct gdb_proc_ctl_pcsexit {
+ procfs_ctl_t cmd;
+ /* Use char array to avoid alignment issues. */
+ char sysset[sizeof (sysset_t)];
+ } *argp;
+ int argp_size = sizeof (struct gdb_proc_ctl_pcsexit)
+ - sizeof (sysset_t)
+ + sysset_t_size (pi);
+
+ argp = xmalloc (argp_size);
+
+ argp->cmd = PCSEXIT;
+ memcpy (&argp->sysset, sysset, sysset_t_size (pi));
+
+ win = (write (pi->ctl_fd, (char *) argp, argp_size) == argp_size);
+ xfree (argp);
+ }
+#else /* ioctl method */
+ win = (ioctl (pi->ctl_fd, PIOCSEXIT, sysset) >= 0);
#endif
-#if defined (SYS_adjtime)
- syscall_table[SYS_adjtime] = "adjtime";
+ /* The above operation renders the procinfo's cached pstatus obsolete. */
+ pi->status_valid = 0;
+
+ return win;
+}
+
+/*
+ * Function: proc_set_held_signals
+ *
+ * Specify the set of blocked / held signals in the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_set_held_signals (procinfo *pi, gdb_sigset_t *sighold)
+{
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+#ifdef NEW_PROC_API
+ {
+ struct {
+ procfs_ctl_t cmd;
+ /* Use char array to avoid alignment issues. */
+ char hold[sizeof (gdb_sigset_t)];
+ } arg;
+
+ arg.cmd = PCSHOLD;
+ memcpy (&arg.hold, sighold, sizeof (gdb_sigset_t));
+ win = (write (pi->ctl_fd, (void *) &arg, sizeof (arg)) == sizeof (arg));
+ }
+#else
+ win = (ioctl (pi->ctl_fd, PIOCSHOLD, sighold) >= 0);
#endif
-#if defined (SYS_systeminfo)
- syscall_table[SYS_systeminfo] = "systeminfo";
+ /* The above operation renders the procinfo's cached pstatus obsolete. */
+ pi->status_valid = 0;
+
+ return win;
+}
+
+/*
+ * Function: proc_get_pending_signals
+ *
+ * returns the set of signals that are pending in the process or LWP.
+ * Will also copy the sigset if 'save' is non-zero.
+ */
+
+gdb_sigset_t *
+proc_get_pending_signals (procinfo *pi, gdb_sigset_t *save)
+{
+ gdb_sigset_t *ret = NULL;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
+
+#ifdef NEW_PROC_API
+ ret = &pi->prstatus.pr_lwp.pr_lwppend;
+#else
+ ret = &pi->prstatus.pr_sigpend;
#endif
-#if defined (SYS_seteuid)
- syscall_table[SYS_seteuid] = "seteuid";
+ if (save && ret)
+ memcpy (save, ret, sizeof (gdb_sigset_t));
+
+ return ret;
+}
+
+/*
+ * Function: proc_get_signal_actions
+ *
+ * returns the set of signal actions.
+ * Will also copy the sigactionset if 'save' is non-zero.
+ */
+
+gdb_sigaction_t *
+proc_get_signal_actions (procinfo *pi, gdb_sigaction_t *save)
+{
+ gdb_sigaction_t *ret = NULL;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
+
+#ifdef NEW_PROC_API
+ ret = &pi->prstatus.pr_lwp.pr_action;
+#else
+ ret = &pi->prstatus.pr_action;
#endif
+ if (save && ret)
+ memcpy (save, ret, sizeof (gdb_sigaction_t));
+
+ return ret;
}
/*
+ * Function: proc_get_held_signals
+ *
+ * returns the set of signals that are held / blocked.
+ * Will also copy the sigset if 'save' is non-zero.
+ */
-GLOBAL FUNCTION
+gdb_sigset_t *
+proc_get_held_signals (procinfo *pi, gdb_sigset_t *save)
+{
+ gdb_sigset_t *ret = NULL;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- ptrace -- override library version to force errors for /proc version
+#ifdef NEW_PROC_API
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
-SYNOPSIS
+#ifdef UNIXWARE
+ ret = &pi->prstatus.pr_lwp.pr_context.uc_sigmask;
+#else
+ ret = &pi->prstatus.pr_lwp.pr_lwphold;
+#endif /* UNIXWARE */
+#else /* not NEW_PROC_API */
+ {
+ static gdb_sigset_t sigheld;
- int ptrace (int request, int pid, PTRACE_ARG3_TYPE arg3, int arg4)
+ if (ioctl (pi->ctl_fd, PIOCGHOLD, &sigheld) >= 0)
+ ret = &sigheld;
+ }
+#endif /* NEW_PROC_API */
+ if (save && ret)
+ memcpy (save, ret, sizeof (gdb_sigset_t));
-DESCRIPTION
+ return ret;
+}
- When gdb is configured to use /proc, it should not be calling
- or otherwise attempting to use ptrace. In order to catch errors
- where use of /proc is configured, but some routine is still calling
- ptrace, we provide a local version of a function with that name
- that does nothing but issue an error message.
-*/
+/*
+ * Function: proc_get_traced_signals
+ *
+ * returns the set of signals that are traced / debugged.
+ * Will also copy the sigset if 'save' is non-zero.
+ */
+
+gdb_sigset_t *
+proc_get_traced_signals (procinfo *pi, gdb_sigset_t *save)
+{
+ gdb_sigset_t *ret = NULL;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+#ifdef NEW_PROC_API
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
+
+ ret = &pi->prstatus.pr_sigtrace;
+#else
+ {
+ static gdb_sigset_t sigtrace;
+
+ if (ioctl (pi->ctl_fd, PIOCGTRACE, &sigtrace) >= 0)
+ ret = &sigtrace;
+ }
+#endif
+ if (save && ret)
+ memcpy (save, ret, sizeof (gdb_sigset_t));
+
+ return ret;
+}
+
+/*
+ * Function: proc_trace_signal
+ *
+ * Add 'signo' to the set of signals that are traced.
+ * Returns non-zero for success, zero for failure.
+ */
int
-ptrace (request, pid, arg3, arg4)
- int request;
- int pid;
- PTRACE_ARG3_TYPE arg3;
- int arg4;
+proc_trace_signal (procinfo *pi, int signo)
{
- error ("internal error - there is a call to ptrace() somewhere");
- /*NOTREACHED*/
+ gdb_sigset_t temp;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+ if (pi)
+ {
+ if (proc_get_traced_signals (pi, &temp))
+ {
+ praddset (&temp, signo);
+ return proc_set_traced_signals (pi, &temp);
+ }
+ }
+
+ return 0; /* failure */
}
/*
+ * Function: proc_ignore_signal
+ *
+ * Remove 'signo' from the set of signals that are traced.
+ * Returns non-zero for success, zero for failure.
+ */
-LOCAL FUNCTION
+int
+proc_ignore_signal (procinfo *pi, int signo)
+{
+ gdb_sigset_t temp;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- procfs_kill_inferior - kill any currently inferior
+ if (pi)
+ {
+ if (proc_get_traced_signals (pi, &temp))
+ {
+ prdelset (&temp, signo);
+ return proc_set_traced_signals (pi, &temp);
+ }
+ }
-SYNOPSIS
+ return 0; /* failure */
+}
- void procfs_kill_inferior (void)
+/*
+ * Function: proc_get_traced_faults
+ *
+ * returns the set of hardware faults that are traced /debugged.
+ * Will also copy the faultset if 'save' is non-zero.
+ */
-DESCRIPTION
+fltset_t *
+proc_get_traced_faults (procinfo *pi, fltset_t *save)
+{
+ fltset_t *ret = NULL;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- Kill any current inferior.
+#ifdef NEW_PROC_API
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
-NOTES
+ ret = &pi->prstatus.pr_flttrace;
+#else
+ {
+ static fltset_t flttrace;
- Kills even attached inferiors. Presumably the user has already
- been prompted that the inferior is an attached one rather than
- one started by gdb. (FIXME?)
+ if (ioctl (pi->ctl_fd, PIOCGFAULT, &flttrace) >= 0)
+ ret = &flttrace;
+ }
+#endif
+ if (save && ret)
+ memcpy (save, ret, sizeof (fltset_t));
-*/
+ return ret;
+}
-static void
-procfs_kill_inferior ()
+/*
+ * Function: proc_get_traced_sysentry
+ *
+ * returns the set of syscalls that are traced /debugged on entry.
+ * Will also copy the syscall set if 'save' is non-zero.
+ */
+
+sysset_t *
+proc_get_traced_sysentry (procinfo *pi, sysset_t *save)
{
- if (inferior_pid != 0)
- {
- unconditionally_kill_inferior ();
- target_mourn_inferior ();
- }
+ sysset_t *ret = NULL;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+#ifdef NEW_PROC_API
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
+
+#ifndef DYNAMIC_SYSCALLS
+ ret = &pi->prstatus.pr_sysentry;
+#else /* DYNAMIC_SYSCALLS */
+ {
+ static sysset_t *sysentry;
+ size_t size;
+
+ if (!sysentry)
+ sysentry = sysset_t_alloc (pi);
+ ret = sysentry;
+ if (pi->status_fd == 0 && open_procinfo_files (pi, FD_STATUS) == 0)
+ return NULL;
+ if (pi->prstatus.pr_sysentry_offset == 0)
+ {
+ gdb_premptysysset (sysentry);
+ }
+ else
+ {
+ int rsize;
+
+ if (lseek (pi->status_fd, (off_t) pi->prstatus.pr_sysentry_offset,
+ SEEK_SET)
+ != (off_t) pi->prstatus.pr_sysentry_offset)
+ return NULL;
+ size = sysset_t_size (pi);
+ gdb_premptysysset (sysentry);
+ rsize = read (pi->status_fd, sysentry, size);
+ if (rsize < 0)
+ return NULL;
+ }
+ }
+#endif /* DYNAMIC_SYSCALLS */
+#else /* !NEW_PROC_API */
+ {
+ static sysset_t sysentry;
+
+ if (ioctl (pi->ctl_fd, PIOCGENTRY, &sysentry) >= 0)
+ ret = &sysentry;
+ }
+#endif /* NEW_PROC_API */
+ if (save && ret)
+ memcpy (save, ret, sysset_t_size (pi));
+
+ return ret;
}
/*
+ * Function: proc_get_traced_sysexit
+ *
+ * returns the set of syscalls that are traced /debugged on exit.
+ * Will also copy the syscall set if 'save' is non-zero.
+ */
+
+sysset_t *
+proc_get_traced_sysexit (procinfo *pi, sysset_t *save)
+{
+ sysset_t * ret = NULL;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
-LOCAL FUNCTION
+#ifdef NEW_PROC_API
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
- unconditionally_kill_inferior - terminate the inferior
+#ifndef DYNAMIC_SYSCALLS
+ ret = &pi->prstatus.pr_sysexit;
+#else /* DYNAMIC_SYSCALLS */
+ {
+ static sysset_t *sysexit;
+ size_t size;
+
+ if (!sysexit)
+ sysexit = sysset_t_alloc (pi);
+ ret = sysexit;
+ if (pi->status_fd == 0 && open_procinfo_files (pi, FD_STATUS) == 0)
+ return NULL;
+ if (pi->prstatus.pr_sysexit_offset == 0)
+ {
+ gdb_premptysysset (sysexit);
+ }
+ else
+ {
+ int rsize;
+
+ if (lseek (pi->status_fd, (off_t) pi->prstatus.pr_sysexit_offset, SEEK_SET)
+ != (off_t) pi->prstatus.pr_sysexit_offset)
+ return NULL;
+ size = sysset_t_size (pi);
+ gdb_premptysysset (sysexit);
+ rsize = read (pi->status_fd, sysexit, size);
+ if (rsize < 0)
+ return NULL;
+ }
+ }
+#endif /* DYNAMIC_SYSCALLS */
+#else
+ {
+ static sysset_t sysexit;
-SYNOPSIS
+ if (ioctl (pi->ctl_fd, PIOCGEXIT, &sysexit) >= 0)
+ ret = &sysexit;
+ }
+#endif
+ if (save && ret)
+ memcpy (save, ret, sysset_t_size (pi));
- static void unconditionally_kill_inferior (void)
+ return ret;
+}
-DESCRIPTION
+/*
+ * Function: proc_clear_current_fault
+ *
+ * The current fault (if any) is cleared; the associated signal
+ * will not be sent to the process or LWP when it resumes.
+ * Returns non-zero for success, zero for failure.
+ */
- Kill the current inferior. Should not be called until it
- is at least tested that there is an inferior.
+int
+proc_clear_current_fault (procinfo *pi)
+{
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
-NOTE
+#ifdef NEW_PROC_API
+ {
+ procfs_ctl_t cmd = PCCFAULT;
+ win = (write (pi->ctl_fd, (void *) &cmd, sizeof (cmd)) == sizeof (cmd));
+ }
+#else
+ win = (ioctl (pi->ctl_fd, PIOCCFAULT, 0) >= 0);
+#endif
- A possibly useful enhancement would be to first try sending
- the inferior a terminate signal, politely asking it to commit
- suicide, before we murder it.
+ return win;
+}
-*/
+/*
+ * Function: proc_set_current_signal
+ *
+ * Set the "current signal" that will be delivered next to the process.
+ * NOTE: semantics are different from those of KILL.
+ * This signal will be delivered to the process or LWP
+ * immediately when it is resumed (even if the signal is held/blocked);
+ * it will NOT immediately cause another event of interest, and will NOT
+ * first trap back to the debugger.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
-static void
-unconditionally_kill_inferior ()
+int
+proc_set_current_signal (procinfo *pi, int signo)
{
- int signo;
+ int win;
+ struct {
+ procfs_ctl_t cmd;
+ /* Use char array to avoid alignment issues. */
+ char sinfo[sizeof (gdb_siginfo_t)];
+ } arg;
+ gdb_siginfo_t *mysinfo;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
- signo = SIGKILL;
- ioctl (pi.fd, PIOCKILL, &signo);
- close_proc_file (&pi);
- wait ((int *) 0);
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+#ifdef PROCFS_DONT_PIOCSSIG_CURSIG
+ /* With Alpha OSF/1 procfs, the kernel gets really confused if it
+ * receives a PIOCSSIG with a signal identical to the current signal,
+ * it messes up the current signal. Work around the kernel bug.
+ */
+ if (signo > 0 &&
+ signo == proc_cursig (pi))
+ return 1; /* I assume this is a success? */
+#endif
+
+ /* The pointer is just a type alias. */
+ mysinfo = (gdb_siginfo_t *) &arg.sinfo;
+ mysinfo->si_signo = signo;
+ mysinfo->si_code = 0;
+ mysinfo->si_pid = getpid (); /* ?why? */
+ mysinfo->si_uid = getuid (); /* ?why? */
+
+#ifdef NEW_PROC_API
+ arg.cmd = PCSSIG;
+ win = (write (pi->ctl_fd, (void *) &arg, sizeof (arg)) == sizeof (arg));
+#else
+ win = (ioctl (pi->ctl_fd, PIOCSSIG, (void *) &arg.sinfo) >= 0);
+#endif
+
+ return win;
}
/*
+ * Function: proc_clear_current_signal
+ *
+ * The current signal (if any) is cleared, and
+ * is not sent to the process or LWP when it resumes.
+ * Returns non-zero for success, zero for failure.
+ */
-LOCAL FUNCTION
-
- procfs_xfer_memory -- copy data to or from inferior memory space
-
-SYNOPSIS
+int
+proc_clear_current_signal (procinfo *pi)
+{
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- int procfs_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
- int dowrite, struct target_ops target)
+#ifdef NEW_PROC_API
+ {
+ struct {
+ procfs_ctl_t cmd;
+ /* Use char array to avoid alignment issues. */
+ char sinfo[sizeof (gdb_siginfo_t)];
+ } arg;
+ gdb_siginfo_t *mysinfo;
+
+ arg.cmd = PCSSIG;
+ /* The pointer is just a type alias. */
+ mysinfo = (gdb_siginfo_t *) &arg.sinfo;
+ mysinfo->si_signo = 0;
+ mysinfo->si_code = 0;
+ mysinfo->si_errno = 0;
+ mysinfo->si_pid = getpid (); /* ?why? */
+ mysinfo->si_uid = getuid (); /* ?why? */
+
+ win = (write (pi->ctl_fd, (void *) &arg, sizeof (arg)) == sizeof (arg));
+ }
+#else
+ win = (ioctl (pi->ctl_fd, PIOCSSIG, 0) >= 0);
+#endif
-DESCRIPTION
+ return win;
+}
- Copy LEN bytes to/from inferior's memory starting at MEMADDR
- from/to debugger memory starting at MYADDR. Copy from inferior
- if DOWRITE is zero or to inferior if DOWRITE is nonzero.
-
- Returns the length copied, which is either the LEN argument or
- zero. This xfer function does not do partial moves, since procfs_ops
- doesn't allow memory operations to cross below us in the target stack
- anyway.
+/*
+ * Function: proc_get_gregs
+ *
+ * Get the general registers for the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
-NOTES
+gdb_gregset_t *
+proc_get_gregs (procinfo *pi)
+{
+ if (!pi->status_valid || !pi->gregs_valid)
+ if (!proc_get_status (pi))
+ return NULL;
+
+ /*
+ * OK, sorry about the ifdef's.
+ * There's three cases instead of two, because
+ * in this instance Unixware and Solaris/RW differ.
+ */
+
+#ifdef NEW_PROC_API
+#ifdef UNIXWARE /* ugh, a true architecture dependency */
+ return &pi->prstatus.pr_lwp.pr_context.uc_mcontext.gregs;
+#else /* not Unixware */
+ return &pi->prstatus.pr_lwp.pr_reg;
+#endif /* Unixware */
+#else /* not NEW_PROC_API */
+ return &pi->prstatus.pr_reg;
+#endif /* NEW_PROC_API */
+}
- The /proc interface makes this an almost trivial task.
+/*
+ * Function: proc_get_fpregs
+ *
+ * Get the floating point registers for the process or LWP.
+ * Returns non-zero for success, zero for failure.
*/
-static int
-procfs_xfer_memory (memaddr, myaddr, len, dowrite, target)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
- int dowrite;
- struct target_ops *target; /* ignored */
+gdb_fpregset_t *
+proc_get_fpregs (procinfo *pi)
{
- int nbytes = 0;
+#ifdef NEW_PROC_API
+ if (!pi->status_valid || !pi->fpregs_valid)
+ if (!proc_get_status (pi))
+ return NULL;
+
+#ifdef UNIXWARE /* a true architecture dependency */
+ return &pi->prstatus.pr_lwp.pr_context.uc_mcontext.fpregs;
+#else
+ return &pi->prstatus.pr_lwp.pr_fpreg;
+#endif /* Unixware */
- if (lseek (pi.fd, (off_t) memaddr, 0) == (off_t) memaddr)
+#else /* not NEW_PROC_API */
+ if (pi->fpregs_valid)
+ return &pi->fpregset; /* already got 'em */
+ else
{
- if (dowrite)
+ if (pi->ctl_fd == 0 &&
+ open_procinfo_files (pi, FD_CTL) == 0)
{
- nbytes = write (pi.fd, myaddr, len);
+ return NULL;
}
else
{
- nbytes = read (pi.fd, myaddr, len);
- }
- if (nbytes < 0)
- {
- nbytes = 0;
+#ifdef PIOCTGFPREG
+ struct {
+ long pr_count;
+ tid_t pr_error_thread;
+ tfpregset_t thread_1;
+ } thread_fpregs;
+
+ thread_fpregs.pr_count = 1;
+ thread_fpregs.thread_1.tid = pi->tid;
+
+ if (pi->tid == 0 &&
+ ioctl (pi->ctl_fd, PIOCGFPREG, &pi->fpregset) >= 0)
+ {
+ pi->fpregs_valid = 1;
+ return &pi->fpregset; /* got 'em now! */
+ }
+ else if (pi->tid != 0 &&
+ ioctl (pi->ctl_fd, PIOCTGFPREG, &thread_fpregs) >= 0)
+ {
+ memcpy (&pi->fpregset, &thread_fpregs.thread_1.pr_fpregs,
+ sizeof (pi->fpregset));
+ pi->fpregs_valid = 1;
+ return &pi->fpregset; /* got 'em now! */
+ }
+ else
+ {
+ return NULL;
+ }
+#else
+ if (ioctl (pi->ctl_fd, PIOCGFPREG, &pi->fpregset) >= 0)
+ {
+ pi->fpregs_valid = 1;
+ return &pi->fpregset; /* got 'em now! */
+ }
+ else
+ {
+ return NULL;
+ }
+#endif
}
}
- return (nbytes);
+#endif
}
/*
+ * Function: proc_set_gregs
+ *
+ * Write the general registers back to the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
-LOCAL FUNCTION
-
- procfs_store_registers -- copy register values back to inferior
+int
+proc_set_gregs (procinfo *pi)
+{
+ gdb_gregset_t *gregs;
+ int win;
-SYNOPSIS
+ if ((gregs = proc_get_gregs (pi)) == NULL)
+ return 0; /* get_regs has already warned */
- void procfs_store_registers (int regno)
+ if (pi->ctl_fd == 0 &&
+ open_procinfo_files (pi, FD_CTL) == 0)
+ {
+ return 0;
+ }
+ else
+ {
+#ifdef NEW_PROC_API
+ struct {
+ procfs_ctl_t cmd;
+ /* Use char array to avoid alignment issues. */
+ char gregs[sizeof (gdb_gregset_t)];
+ } arg;
+
+ arg.cmd = PCSREG;
+ memcpy (&arg.gregs, gregs, sizeof (arg.gregs));
+ win = (write (pi->ctl_fd, (void *) &arg, sizeof (arg)) == sizeof (arg));
+#else
+ win = (ioctl (pi->ctl_fd, PIOCSREG, gregs) >= 0);
+#endif
+ }
-DESCRIPTION
+ /* Policy: writing the regs invalidates our cache. */
+ pi->gregs_valid = 0;
+ return win;
+}
- Store our current register values back into the inferior. If
- REGNO is -1 then store all the register, otherwise store just
- the value specified by REGNO.
+/*
+ * Function: proc_set_fpregs
+ *
+ * Modify the floating point register set of the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
-NOTES
+int
+proc_set_fpregs (procinfo *pi)
+{
+ gdb_fpregset_t *fpregs;
+ int win;
- If we are storing only a single register, we first have to get all
- the current values from the process, overwrite the desired register
- in the gregset with the one we want from gdb's registers, and then
- send the whole set back to the process. For writing all the
- registers, all we have to do is generate the gregset and send it to
- the process.
+ if ((fpregs = proc_get_fpregs (pi)) == NULL)
+ return 0; /* get_fpregs has already warned */
- Also note that the process has to be stopped on an event of interest
- for this to work, which basically means that it has to have been
- run under the control of one of the other /proc ioctl calls and not
- ptrace. Since we don't use ptrace anyway, we don't worry about this
- fine point, but it is worth noting for future reference.
+ if (pi->ctl_fd == 0 &&
+ open_procinfo_files (pi, FD_CTL) == 0)
+ {
+ return 0;
+ }
+ else
+ {
+#ifdef NEW_PROC_API
+ struct {
+ procfs_ctl_t cmd;
+ /* Use char array to avoid alignment issues. */
+ char fpregs[sizeof (gdb_fpregset_t)];
+ } arg;
+
+ arg.cmd = PCSFPREG;
+ memcpy (&arg.fpregs, fpregs, sizeof (arg.fpregs));
+ win = (write (pi->ctl_fd, (void *) &arg, sizeof (arg)) == sizeof (arg));
+#else
+#ifdef PIOCTSFPREG
+ if (pi->tid == 0)
+ win = (ioctl (pi->ctl_fd, PIOCSFPREG, fpregs) >= 0);
+ else
+ {
+ struct {
+ long pr_count;
+ tid_t pr_error_thread;
+ tfpregset_t thread_1;
+ } thread_fpregs;
+
+ thread_fpregs.pr_count = 1;
+ thread_fpregs.thread_1.tid = pi->tid;
+ memcpy (&thread_fpregs.thread_1.pr_fpregs, fpregs,
+ sizeof (*fpregs));
+ win = (ioctl (pi->ctl_fd, PIOCTSFPREG, &thread_fpregs) >= 0);
+ }
+#else
+ win = (ioctl (pi->ctl_fd, PIOCSFPREG, fpregs) >= 0);
+#endif /* osf PIOCTSFPREG */
+#endif /* NEW_PROC_API */
+ }
- Gdb is confused about what this function is supposed to return.
- Some versions return a value, others return nothing. Some are
- declared to return a value and actually return nothing. Gdb ignores
- anything returned. (FIXME)
+ /* Policy: writing the regs invalidates our cache. */
+ pi->fpregs_valid = 0;
+ return win;
+}
+/*
+ * Function: proc_kill
+ *
+ * Send a signal to the proc or lwp with the semantics of "kill()".
+ * Returns non-zero for success, zero for failure.
*/
-static void
-procfs_store_registers (regno)
- int regno;
+int
+proc_kill (procinfo *pi, int signo)
{
- if (regno != -1)
- {
- ioctl (pi.fd, PIOCGREG, &pi.gregset);
- }
- fill_gregset (&pi.gregset, regno);
- ioctl (pi.fd, PIOCSREG, &pi.gregset);
+ int win;
-#if defined (FP0_REGNUM)
+ /*
+ * We might conceivably apply this operation to an LWP, and
+ * the LWP's ctl file descriptor might not be open.
+ */
- /* Now repeat everything using the floating point register set, if the
- target has floating point hardware. Since we ignore the returned value,
- we'll never know whether it worked or not anyway. */
-
- if (regno != -1)
+ if (pi->ctl_fd == 0 &&
+ open_procinfo_files (pi, FD_CTL) == 0)
{
- ioctl (pi.fd, PIOCGFPREG, &pi.fpregset);
+ return 0;
}
- fill_fpregset (&pi.fpregset, regno);
- ioctl (pi.fd, PIOCSFPREG, &pi.fpregset);
+ else
+ {
+#ifdef NEW_PROC_API
+ procfs_ctl_t cmd[2];
-#endif /* FP0_REGNUM */
+ cmd[0] = PCKILL;
+ cmd[1] = signo;
+ win = (write (pi->ctl_fd, (char *) &cmd, sizeof (cmd)) == sizeof (cmd));
+#else /* ioctl method */
+ /* FIXME: do I need the Alpha OSF fixups present in
+ procfs.c/unconditionally_kill_inferior? Perhaps only for SIGKILL? */
+ win = (ioctl (pi->ctl_fd, PIOCKILL, &signo) >= 0);
+#endif
+ }
+ return win;
}
/*
+ * Function: proc_parent_pid
+ *
+ * Find the pid of the process that started this one.
+ * Returns the parent process pid, or zero.
+ */
-LOCAL FUNCTION
-
- procfs_init_inferior - initialize access to a /proc entry
-
-SYNOPSIS
+int
+proc_parent_pid (procinfo *pi)
+{
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- void procfs_init_inferior (int pid)
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0;
-DESCRIPTION
+ return pi->prstatus.pr_ppid;
+}
- When gdb starts an inferior, this function is called in the parent
- process immediately after the fork. It waits for the child to stop
- on the return from the exec system call (the child itself takes care
- of ensuring that this is set up), then sets up the set of signals
- and faults that are to be traced.
-NOTES
+/*
+ * Function: proc_set_watchpoint
+ *
+ */
- If proc_init_failed ever gets called, control returns to the command
- processing loop via the standard error handling code.
+int
+proc_set_watchpoint (procinfo *pi, CORE_ADDR addr, int len, int wflags)
+{
+#if !defined (TARGET_HAS_HARDWARE_WATCHPOINTS)
+ return 0;
+#else
+/* Horrible hack! Detect Solaris 2.5, because this doesn't work on 2.5 */
+#if defined (PIOCOPENLWP) || defined (UNIXWARE) /* Solaris 2.5: bail out */
+ return 0;
+#else
+ struct {
+ procfs_ctl_t cmd;
+ char watch[sizeof (prwatch_t)];
+ } arg;
+ prwatch_t *pwatch;
+
+ pwatch = (prwatch_t *) &arg.watch;
+ pwatch->pr_vaddr = address_to_host_pointer (addr);
+ pwatch->pr_size = len;
+ pwatch->pr_wflags = wflags;
+#if defined(NEW_PROC_API) && defined (PCWATCH)
+ arg.cmd = PCWATCH;
+ return (write (pi->ctl_fd, &arg, sizeof (arg)) == sizeof (arg));
+#else
+#if defined (PIOCSWATCH)
+ return (ioctl (pi->ctl_fd, PIOCSWATCH, pwatch) >= 0);
+#else
+ return 0; /* Fail */
+#endif
+#endif
+#endif
+#endif
+}
+/*
+ * Function: proc_iterate_over_mappings
+ *
+ * Given a pointer to a function, call that function once for every
+ * mapped address space in the process. The callback function
+ * receives an open file descriptor for the file corresponding to
+ * that mapped address space (if there is one), and the base address
+ * of the mapped space. Quit when the callback function returns a
+ * nonzero value, or at teh end of the mappings.
+ *
+ * Returns: the first non-zero return value of the callback function,
+ * or zero.
*/
-static void
-procfs_init_inferior (pid)
- int pid;
+/* FIXME: it's probably a waste to cache this FD.
+ It doesn't get called that often... and if I open it
+ every time, I don't need to lseek it. */
+int
+proc_iterate_over_mappings (int (*func) (int, CORE_ADDR))
{
+ struct prmap *map;
+ procinfo *pi;
+#ifndef NEW_PROC_API /* avoid compiler warning */
+ int nmaps = 0;
+ int i;
+#else
+ int map_fd;
+ char pathname[MAX_PROC_NAME_SIZE];
+#endif
+ int funcstat = 0;
+ int fd;
- push_target (&procfs_ops);
+ pi = find_procinfo_or_die (PIDGET (inferior_ptid), 0);
- if (!open_proc_file (pid, &pi, O_RDWR))
- {
- proc_init_failed ("can't open process file");
- }
- else
+#ifdef NEW_PROC_API
+ /* Open map fd. */
+ sprintf (pathname, "/proc/%d/map", pi->pid);
+ if ((map_fd = open_with_retry (pathname, O_RDONLY)) < 0)
+ proc_error (pi, "proc_iterate_over_mappings (open)", __LINE__);
+
+ /* Make sure it gets closed again. */
+ make_cleanup_close (map_fd);
+
+ /* Allocate space for mapping (lifetime only for this function). */
+ map = alloca (sizeof (struct prmap));
+
+ /* Now read the mappings from the file,
+ open a file descriptor for those that have a name,
+ and call the callback function. */
+ while (read (map_fd,
+ (void *) map,
+ sizeof (struct prmap)) == sizeof (struct prmap))
{
- memset ((char *) &pi.prrun, 0, sizeof (pi.prrun));
- prfillset (&pi.prrun.pr_trace);
- procfs_notice_signals ();
- prfillset (&pi.prrun.pr_fault);
- prdelset (&pi.prrun.pr_fault, FLTPAGE);
- if (ioctl (pi.fd, PIOCWSTOP, &pi.prstatus) < 0)
+ char name[MAX_PROC_NAME_SIZE + sizeof (map->pr_mapname)];
+
+ if (map->pr_vaddr == 0 && map->pr_size == 0)
+ break; /* sanity */
+
+ if (map->pr_mapname[0] == 0)
{
- proc_init_failed ("PIOCWSTOP failed");
+ fd = -1; /* no map file */
}
- else if (ioctl (pi.fd, PIOCSFAULT, &pi.prrun.pr_fault) < 0)
+ else
{
- proc_init_failed ("PIOCSFAULT failed");
+ sprintf (name, "/proc/%d/object/%s", pi->pid, map->pr_mapname);
+ /* Note: caller's responsibility to close this fd! */
+ fd = open_with_retry (name, O_RDONLY);
+ /* Note: we don't test the above call for failure;
+ we just pass the FD on as given. Sometimes there is
+ no file, so the ioctl may return failure, but that's
+ not a problem. */
}
+
+ /* Stop looping if the callback returns non-zero. */
+ if ((funcstat = (*func) (fd, (CORE_ADDR) map->pr_vaddr)) != 0)
+ break;
+ }
+#else
+ /* Get the number of mapping entries. */
+ if (ioctl (pi->ctl_fd, PIOCNMAP, &nmaps) < 0)
+ proc_error (pi, "proc_iterate_over_mappings (PIOCNMAP)", __LINE__);
+
+ /* Allocate space for mappings (lifetime only this function). */
+ map = (struct prmap *) alloca ((nmaps + 1) * sizeof (struct prmap));
+
+ /* Read in all the mappings. */
+ if (ioctl (pi->ctl_fd, PIOCMAP, map) < 0)
+ proc_error (pi, "proc_iterate_over_mappings (PIOCMAP)", __LINE__);
+
+ /* Now loop through the mappings, open an fd for each, and
+ call the callback function. */
+ for (i = 0;
+ i < nmaps && map[i].pr_size != 0;
+ i++)
+ {
+ /* Note: caller's responsibility to close this fd! */
+ fd = ioctl (pi->ctl_fd, PIOCOPENM, &map[i].pr_vaddr);
+ /* Note: we don't test the above call for failure;
+ we just pass the FD on as given. Sometimes there is
+ no file, so the ioctl may return failure, but that's
+ not a problem. */
+
+ /* Stop looping if the callback returns non-zero. */
+ funcstat = (*func) (fd, host_pointer_to_address (map[i].pr_vaddr));
+ if (funcstat != 0)
+ break;
}
+#endif
+
+ return funcstat;
}
+#ifdef TM_I386SOL2_H /* Is it hokey to use this? */
+
+#include <sys/sysi86.h>
+
/*
+ * Function: proc_get_LDT_entry
+ *
+ * Inputs:
+ * procinfo *pi;
+ * int key;
+ *
+ * The 'key' is actually the value of the lower 16 bits of
+ * the GS register for the LWP that we're interested in.
+ *
+ * Return: matching ssh struct (LDT entry).
+ */
+
+struct ssd *
+proc_get_LDT_entry (procinfo *pi, int key)
+{
+ static struct ssd *ldt_entry = NULL;
+#ifdef NEW_PROC_API
+ char pathname[MAX_PROC_NAME_SIZE];
+ struct cleanup *old_chain = NULL;
+ int fd;
+
+ /* Allocate space for one LDT entry.
+ This alloc must persist, because we return a pointer to it. */
+ if (ldt_entry == NULL)
+ ldt_entry = (struct ssd *) xmalloc (sizeof (struct ssd));
+
+ /* Open the file descriptor for the LDT table. */
+ sprintf (pathname, "/proc/%d/ldt", pi->pid);
+ if ((fd = open_with_retry (pathname, O_RDONLY)) < 0)
+ {
+ proc_warn (pi, "proc_get_LDT_entry (open)", __LINE__);
+ return NULL;
+ }
+ /* Make sure it gets closed again! */
+ old_chain = make_cleanup_close (fd);
+
+ /* Now 'read' thru the table, find a match and return it. */
+ while (read (fd, ldt_entry, sizeof (struct ssd)) == sizeof (struct ssd))
+ {
+ if (ldt_entry->sel == 0 &&
+ ldt_entry->bo == 0 &&
+ ldt_entry->acc1 == 0 &&
+ ldt_entry->acc2 == 0)
+ break; /* end of table */
+ /* If key matches, return this entry. */
+ if (ldt_entry->sel == key)
+ return ldt_entry;
+ }
+ /* Loop ended, match not found. */
+ return NULL;
+#else
+ int nldt, i;
+ static int nalloc = 0;
+
+ /* Get the number of LDT entries. */
+ if (ioctl (pi->ctl_fd, PIOCNLDT, &nldt) < 0)
+ {
+ proc_warn (pi, "proc_get_LDT_entry (PIOCNLDT)", __LINE__);
+ return NULL;
+ }
+
+ /* Allocate space for the number of LDT entries. */
+ /* This alloc has to persist, 'cause we return a pointer to it. */
+ if (nldt > nalloc)
+ {
+ ldt_entry = (struct ssd *)
+ xrealloc (ldt_entry, (nldt + 1) * sizeof (struct ssd));
+ nalloc = nldt;
+ }
+
+ /* Read the whole table in one gulp. */
+ if (ioctl (pi->ctl_fd, PIOCLDT, ldt_entry) < 0)
+ {
+ proc_warn (pi, "proc_get_LDT_entry (PIOCLDT)", __LINE__);
+ return NULL;
+ }
-GLOBAL FUNCTION
+ /* Search the table and return the (first) entry matching 'key'. */
+ for (i = 0; i < nldt; i++)
+ if (ldt_entry[i].sel == key)
+ return &ldt_entry[i];
- procfs_notice_signals
+ /* Loop ended, match not found. */
+ return NULL;
+#endif
+}
-SYNOPSIS
+#endif /* TM_I386SOL2_H */
- static void procfs_notice_signals (void);
+/* =============== END, non-thread part of /proc "MODULE" =============== */
-DESCRIPTION
+/* =================== Thread "MODULE" =================== */
- When the user changes the state of gdb's signal handling via the
- "handle" command, this function gets called to see if any change
- in the /proc interface is required. It is also called internally
- by other /proc interface functions to initialize the state of
- the traced signal set.
+/* NOTE: you'll see more ifdefs and duplication of functions here,
+ since there is a different way to do threads on every OS. */
- One thing it does is that signals for which the state is "nostop",
- "noprint", and "pass", have their trace bits reset in the pr_trace
- field, so that they are no longer traced. This allows them to be
- delivered directly to the inferior without the debugger ever being
- involved.
+/*
+ * Function: proc_get_nthreads
+ *
+ * Return the number of threads for the process
*/
-static void
-procfs_notice_signals ()
+#if defined (PIOCNTHR) && defined (PIOCTLIST)
+/*
+ * OSF version
+ */
+int
+proc_get_nthreads (procinfo *pi)
{
- int signo;
+ int nthreads = 0;
- if (pi.valid)
- {
- for (signo = 0; signo < NSIG; signo++)
- {
- if (signal_stop_state (signo) == 0 &&
- signal_print_state (signo) == 0 &&
- signal_pass_state (signo) == 1)
- {
- prdelset (&pi.prrun.pr_trace, signo);
- }
- else
- {
- praddset (&pi.prrun.pr_trace, signo);
- }
- }
- if (ioctl (pi.fd, PIOCSTRACE, &pi.prrun.pr_trace))
- {
- print_sys_errmsg ("PIOCSTRACE failed", errno);
- }
- }
+ if (ioctl (pi->ctl_fd, PIOCNTHR, &nthreads) < 0)
+ proc_warn (pi, "procfs: PIOCNTHR failed", __LINE__);
+
+ return nthreads;
}
+#else
+#if defined (SYS_lwpcreate) || defined (SYS_lwp_create) /* FIXME: multiple */
/*
+ * Solaris and Unixware version
+ */
+int
+proc_get_nthreads (procinfo *pi)
+{
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0;
+
+ /*
+ * NEW_PROC_API: only works for the process procinfo,
+ * because the LWP procinfos do not get prstatus filled in.
+ */
+#ifdef NEW_PROC_API
+ if (pi->tid != 0) /* find the parent process procinfo */
+ pi = find_procinfo_or_die (pi->pid, 0);
+#endif
+ return pi->prstatus.pr_nlwp;
+}
-LOCAL FUNCTION
+#else
+/*
+ * Default version
+ */
+int
+proc_get_nthreads (procinfo *pi)
+{
+ return 0;
+}
+#endif
+#endif
- proc_set_exec_trap -- arrange for exec'd child to halt at startup
+/*
+ * Function: proc_get_current_thread (LWP version)
+ *
+ * Return the ID of the thread that had an event of interest.
+ * (ie. the one that hit a breakpoint or other traced event).
+ * All other things being equal, this should be the ID of a
+ * thread that is currently executing.
+ */
-SYNOPSIS
+#if defined (SYS_lwpcreate) || defined (SYS_lwp_create) /* FIXME: multiple */
+/*
+ * Solaris and Unixware version
+ */
+int
+proc_get_current_thread (procinfo *pi)
+{
+ /*
+ * Note: this should be applied to the root procinfo for the process,
+ * not to the procinfo for an LWP. If applied to the procinfo for
+ * an LWP, it will simply return that LWP's ID. In that case,
+ * find the parent process procinfo.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- void proc_set_exec_trap (void)
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0;
-DESCRIPTION
+#ifdef NEW_PROC_API
+ return pi->prstatus.pr_lwp.pr_lwpid;
+#else
+ return pi->prstatus.pr_who;
+#endif
+}
- This function is called in the child process when starting up
- an inferior, prior to doing the exec of the actual inferior.
- It sets the child process's exitset to make exit from the exec
- system call an event of interest to stop on, and then simply
- returns. The child does the exec, the system call returns, and
- the child stops at the first instruction, ready for the gdb
- parent process to take control of it.
+#else
+#if defined (PIOCNTHR) && defined (PIOCTLIST)
+/*
+ * OSF version
+ */
+int
+proc_get_current_thread (procinfo *pi)
+{
+#if 0 /* FIXME: not ready for prime time? */
+ return pi->prstatus.pr_tid;
+#else
+ return 0;
+#endif
+}
-NOTE
+#else
+/*
+ * Default version
+ */
+int
+proc_get_current_thread (procinfo *pi)
+{
+ return 0;
+}
- We need to use all local variables since the child may be sharing
- it's data space with the parent, if vfork was used rather than
- fork.
+#endif
+#endif
- Also note that we want to turn off the inherit-on-fork flag in
- the child process so that any grand-children start with all
- tracing flags cleared.
+/*
+ * Function: proc_update_threads
+ *
+ * Discover the IDs of all the threads within the process, and
+ * create a procinfo for each of them (chained to the parent).
+ *
+ * This unfortunately requires a different method on every OS.
+ *
+ * Return: non-zero for success, zero for failure.
*/
-static void
-proc_set_exec_trap ()
+int
+proc_delete_dead_threads (procinfo *parent, procinfo *thread, void *ignore)
{
- sysset_t exitset;
- auto char procname[32];
- int fd;
-
- sprintf (procname, PROC_NAME_FMT, getpid ());
- if ((fd = open (procname, O_RDWR)) < 0)
+ if (thread && parent) /* sanity */
{
- perror (procname);
- fflush (stderr);
- _exit (127);
+ thread->status_valid = 0;
+ if (!proc_get_status (thread))
+ destroy_one_procinfo (&parent->thread_list, thread);
}
- premptyset (&exitset);
+ return 0; /* keep iterating */
+}
- /* GW: Rationale...
- Not all systems with /proc have all the exec* syscalls with the same
- names. On the SGI, for example, there is no SYS_exec, but there
- *is* a SYS_execv. So, we try to account for that. */
+#if defined (PIOCLSTATUS)
+/*
+ * Solaris 2.5 (ioctl) version
+ */
+int
+proc_update_threads (procinfo *pi)
+{
+ gdb_prstatus_t *prstatus;
+ struct cleanup *old_chain = NULL;
+ procinfo *thread;
+ int nlwp, i;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
-#ifdef SYS_exec
- praddset (&exitset, SYS_exec);
-#endif
-#ifdef SYS_execve
- praddset (&exitset, SYS_execve);
-#endif
-#ifdef SYS_execv
- praddset(&exitset, SYS_execv);
-#endif
+ proc_iterate_over_threads (pi, proc_delete_dead_threads, NULL);
- if (ioctl (fd, PIOCSEXIT, &exitset) < 0)
- {
- perror (procname);
- fflush (stderr);
- _exit (127);
- }
+ if ((nlwp = proc_get_nthreads (pi)) <= 1)
+ return 1; /* Process is not multi-threaded; nothing to do. */
- /* Turn off inherit-on-fork flag so that all grand-children of gdb
- start with tracing flags cleared. */
+ prstatus = xmalloc (sizeof (gdb_prstatus_t) * (nlwp + 1));
-#if defined (PIOCRESET) /* New method */
- {
- long pr_flags;
- pr_flags = PR_FORK;
- ioctl (fd, PIOCRESET, &pr_flags);
- }
-#else
-#if defined (PIOCRFORK) /* Original method */
- ioctl (fd, PIOCRFORK, NULL);
-#endif
-#endif
+ old_chain = make_cleanup (xfree, prstatus);
+ if (ioctl (pi->ctl_fd, PIOCLSTATUS, prstatus) < 0)
+ proc_error (pi, "update_threads (PIOCLSTATUS)", __LINE__);
- /* Turn on run-on-last-close flag so that this process will not hang
- if GDB goes away for some reason. */
+ /* Skip element zero, which represents the process as a whole. */
+ for (i = 1; i < nlwp + 1; i++)
+ {
+ if ((thread = create_procinfo (pi->pid, prstatus[i].pr_who)) == NULL)
+ proc_error (pi, "update_threads, create_procinfo", __LINE__);
-#if defined (PIOCSET) /* New method */
- {
- long pr_flags;
- pr_flags = PR_RLC;
- (void) ioctl (fd, PIOCSET, &pr_flags);
- }
+ memcpy (&thread->prstatus, &prstatus[i], sizeof (*prstatus));
+ thread->status_valid = 1;
+ }
+ pi->threads_valid = 1;
+ do_cleanups (old_chain);
+ return 1;
+}
#else
-#if defined (PIOCSRLC) /* Original method */
- (void) ioctl (fd, PIOCSRLC, 0);
-#endif
-#endif
+#ifdef NEW_PROC_API
+/*
+ * Unixware and Solaris 6 (and later) version
+ */
+static void
+do_closedir_cleanup (void *dir)
+{
+ closedir (dir);
}
+int
+proc_update_threads (procinfo *pi)
+{
+ char pathname[MAX_PROC_NAME_SIZE + 16];
+ struct dirent *direntry;
+ struct cleanup *old_chain = NULL;
+ procinfo *thread;
+ DIR *dirp;
+ int lwpid;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+ proc_iterate_over_threads (pi, proc_delete_dead_threads, NULL);
+
+ /*
+ * Unixware
+ *
+ * Note: this brute-force method is the only way I know of
+ * to accomplish this task on Unixware. This method will
+ * also work on Solaris 2.6 and 2.7. There is a much simpler
+ * and more elegant way to do this on Solaris, but the margins
+ * of this manuscript are too small to write it here... ;-)
+ */
+
+ strcpy (pathname, pi->pathname);
+ strcat (pathname, "/lwp");
+ if ((dirp = opendir (pathname)) == NULL)
+ proc_error (pi, "update_threads, opendir", __LINE__);
+
+ old_chain = make_cleanup (do_closedir_cleanup, dirp);
+ while ((direntry = readdir (dirp)) != NULL)
+ if (direntry->d_name[0] != '.') /* skip '.' and '..' */
+ {
+ lwpid = atoi (&direntry->d_name[0]);
+ if ((thread = create_procinfo (pi->pid, lwpid)) == NULL)
+ proc_error (pi, "update_threads, create_procinfo", __LINE__);
+ }
+ pi->threads_valid = 1;
+ do_cleanups (old_chain);
+ return 1;
+}
+#else
+#ifdef PIOCTLIST
/*
+ * OSF version
+ */
+int
+proc_update_threads (procinfo *pi)
+{
+ int nthreads, i;
+ tid_t *threads;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
-GLOBAL FUNCTION
-
- proc_iterate_over_mappings -- call function for every mapped space
+ proc_iterate_over_threads (pi, proc_delete_dead_threads, NULL);
-SYNOPSIS
+ nthreads = proc_get_nthreads (pi);
+ if (nthreads < 2)
+ return 0; /* nothing to do for 1 or fewer threads */
- int proc_iterate_over_mappings (int (*func)())
+ threads = xmalloc (nthreads * sizeof (tid_t));
+
+ if (ioctl (pi->ctl_fd, PIOCTLIST, threads) < 0)
+ proc_error (pi, "procfs: update_threads (PIOCTLIST)", __LINE__);
-DESCRIPTION
+ for (i = 0; i < nthreads; i++)
+ {
+ if (!find_procinfo (pi->pid, threads[i]))
+ if (!create_procinfo (pi->pid, threads[i]))
+ proc_error (pi, "update_threads, create_procinfo", __LINE__);
+ }
+ pi->threads_valid = 1;
+ return 1;
+}
+#else
+/*
+ * Default version
+ */
+int
+proc_update_threads (procinfo *pi)
+{
+ return 0;
+}
+#endif /* OSF PIOCTLIST */
+#endif /* NEW_PROC_API */
+#endif /* SOL 2.5 PIOCLSTATUS */
- Given a pointer to a function, call that function for every
- mapped address space, passing it an open file descriptor for
- the file corresponding to that mapped address space (if any)
- and the base address of the mapped space. Quit when we hit
- the end of the mappings or the function returns nonzero.
+/*
+ * Function: proc_iterate_over_threads
+ *
+ * Description:
+ * Given a pointer to a function, call that function once
+ * for each lwp in the procinfo list, until the function
+ * returns non-zero, in which event return the value
+ * returned by the function.
+ *
+ * Note: this function does NOT call update_threads.
+ * If you want to discover new threads first, you must
+ * call that function explicitly. This function just makes
+ * a quick pass over the currently-known procinfos.
+ *
+ * Arguments:
+ * pi - parent process procinfo
+ * func - per-thread function
+ * ptr - opaque parameter for function.
+ *
+ * Return:
+ * First non-zero return value from the callee, or zero.
*/
int
-proc_iterate_over_mappings (func)
- int (*func) PARAMS ((int, CORE_ADDR));
+proc_iterate_over_threads (procinfo *pi,
+ int (*func) (procinfo *, procinfo *, void *),
+ void *ptr)
{
- int nmap;
- int fd;
- int funcstat = 0;
- struct prmap *prmaps;
- struct prmap *prmap;
+ procinfo *thread, *next;
+ int retval = 0;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- if (pi.valid && (ioctl (pi.fd, PIOCNMAP, &nmap) == 0))
+ for (thread = pi->thread_list; thread != NULL; thread = next)
{
- prmaps = (struct prmap *) alloca ((nmap + 1) * sizeof (*prmaps));
- if (ioctl (pi.fd, PIOCMAP, prmaps) == 0)
- {
- for (prmap = prmaps; prmap -> pr_size && funcstat == 0; ++prmap)
- {
- fd = proc_address_to_fd ((CORE_ADDR) prmap -> pr_vaddr, 0);
- funcstat = (*func) (fd, (CORE_ADDR) prmap -> pr_vaddr);
- close (fd);
- }
- }
+ next = thread->next; /* in case thread is destroyed */
+ if ((retval = (*func) (pi, thread, ptr)) != 0)
+ break;
}
- return (funcstat);
-}
-#if 0 /* Currently unused */
-/*
-
-GLOBAL FUNCTION
+ return retval;
+}
- proc_base_address -- find base address for segment containing address
+/* =================== END, Thread "MODULE" =================== */
-SYNOPSIS
+/* =================== END, /proc "MODULE" =================== */
- CORE_ADDR proc_base_address (CORE_ADDR addr)
+/* =================== GDB "MODULE" =================== */
-DESCRIPTION
+/*
+ * Here are all of the gdb target vector functions and their friends.
+ */
- Given an address of a location in the inferior, find and return
- the base address of the mapped segment containing that address.
+static ptid_t do_attach (ptid_t ptid);
+static void do_detach (int signo);
+static int register_gdb_signals (procinfo *, gdb_sigset_t *);
- This is used for example, by the shared library support code,
- where we have the pc value for some location in the shared library
- where we are stopped, and need to know the base address of the
- segment containing that address.
-*/
+/*
+ * Function: procfs_debug_inferior
+ *
+ * Sets up the inferior to be debugged.
+ * Registers to trace signals, hardware faults, and syscalls.
+ * Note: does not set RLC flag: caller may want to customize that.
+ *
+ * Returns: zero for success (note! unlike most functions in this module)
+ * On failure, returns the LINE NUMBER where it failed!
+ */
-CORE_ADDR
-proc_base_address (addr)
- CORE_ADDR addr;
+static int
+procfs_debug_inferior (procinfo *pi)
{
- int nmap;
- struct prmap *prmaps;
- struct prmap *prmap;
- CORE_ADDR baseaddr = 0;
+ fltset_t traced_faults;
+ gdb_sigset_t traced_signals;
+ sysset_t *traced_syscall_entries;
+ sysset_t *traced_syscall_exits;
+ int status;
+
+#ifdef PROCFS_DONT_TRACE_FAULTS
+ /* On some systems (OSF), we don't trace hardware faults.
+ Apparently it's enough that we catch them as signals.
+ Wonder why we don't just do that in general? */
+ premptyset (&traced_faults); /* don't trace faults. */
+#else
+ /* Register to trace hardware faults in the child. */
+ prfillset (&traced_faults); /* trace all faults... */
+ prdelset (&traced_faults, FLTPAGE); /* except page fault. */
+#endif
+ if (!proc_set_traced_faults (pi, &traced_faults))
+ return __LINE__;
- if (pi.valid && (ioctl (pi.fd, PIOCNMAP, &nmap) == 0))
- {
- prmaps = (struct prmap *) alloca ((nmap + 1) * sizeof (*prmaps));
- if (ioctl (pi.fd, PIOCMAP, prmaps) == 0)
- {
- for (prmap = prmaps; prmap -> pr_size; ++prmap)
- {
- if ((prmap -> pr_vaddr <= (caddr_t) addr) &&
- (prmap -> pr_vaddr + prmap -> pr_size > (caddr_t) addr))
- {
- baseaddr = (CORE_ADDR) prmap -> pr_vaddr;
- break;
- }
- }
- }
- }
- return (baseaddr);
-}
+ /* Register to trace selected signals in the child. */
+ premptyset (&traced_signals);
+ if (!register_gdb_signals (pi, &traced_signals))
+ return __LINE__;
-#endif /* 0 */
-/*
+ /* Register to trace the 'exit' system call (on entry). */
+ traced_syscall_entries = sysset_t_alloc (pi);
+ gdb_premptysysset (traced_syscall_entries);
+#ifdef SYS_exit
+ gdb_praddsysset (traced_syscall_entries, SYS_exit);
+#endif
+#ifdef SYS_lwpexit
+ gdb_praddsysset (traced_syscall_entries, SYS_lwpexit); /* And _lwp_exit... */
+#endif
+#ifdef SYS_lwp_exit
+ gdb_praddsysset (traced_syscall_entries, SYS_lwp_exit);
+#endif
+#ifdef DYNAMIC_SYSCALLS
+ {
+ int callnum = find_syscall (pi, "_exit");
+ if (callnum >= 0)
+ gdb_praddsysset (traced_syscall_entries, callnum);
+ }
+#endif
-LOCAL FUNCTION
+ status = proc_set_traced_sysentry (pi, traced_syscall_entries);
+ xfree (traced_syscall_entries);
+ if (!status)
+ return __LINE__;
- proc_address_to_fd -- return open fd for file mapped to address
+#ifdef PRFS_STOPEXEC /* defined on OSF */
+ /* OSF method for tracing exec syscalls. Quoting:
+ Under Alpha OSF/1 we have to use a PIOCSSPCACT ioctl to trace
+ exits from exec system calls because of the user level loader. */
+ /* FIXME: make nice and maybe move into an access function. */
+ {
+ int prfs_flags;
-SYNOPSIS
+ if (ioctl (pi->ctl_fd, PIOCGSPCACT, &prfs_flags) < 0)
+ return __LINE__;
- int proc_address_to_fd (CORE_ADDR addr, complain)
+ prfs_flags |= PRFS_STOPEXEC;
-DESCRIPTION
+ if (ioctl (pi->ctl_fd, PIOCSSPCACT, &prfs_flags) < 0)
+ return __LINE__;
+ }
+#else /* not PRFS_STOPEXEC */
+ /* Everyone else's (except OSF) method for tracing exec syscalls */
+ /* GW: Rationale...
+ Not all systems with /proc have all the exec* syscalls with the same
+ names. On the SGI, for example, there is no SYS_exec, but there
+ *is* a SYS_execv. So, we try to account for that. */
- Given an address in the current inferior's address space, use the
- /proc interface to find an open file descriptor for the file that
- this address was mapped in from. Return -1 if there is no current
- inferior. Print a warning message if there is an inferior but
- the address corresponds to no file (IE a bogus address).
+ traced_syscall_exits = sysset_t_alloc (pi);
+ gdb_premptysysset (traced_syscall_exits);
+#ifdef SYS_exec
+ gdb_praddsysset (traced_syscall_exits, SYS_exec);
+#endif
+#ifdef SYS_execve
+ gdb_praddsysset (traced_syscall_exits, SYS_execve);
+#endif
+#ifdef SYS_execv
+ gdb_praddsysset (traced_syscall_exits, SYS_execv);
+#endif
-*/
+#ifdef SYS_lwpcreate
+ gdb_praddsysset (traced_syscall_exits, SYS_lwpcreate);
+ gdb_praddsysset (traced_syscall_exits, SYS_lwpexit);
+#endif
-static int
-proc_address_to_fd (addr, complain)
- CORE_ADDR addr;
- int complain;
-{
- int fd = -1;
+#ifdef SYS_lwp_create /* FIXME: once only, please */
+ gdb_praddsysset (traced_syscall_exits, SYS_lwp_create);
+ gdb_praddsysset (traced_syscall_exits, SYS_lwp_exit);
+#endif
- if (pi.valid)
- {
- if ((fd = ioctl (pi.fd, PIOCOPENM, (caddr_t *) &addr)) < 0)
- {
- if (complain)
- {
- print_sys_errmsg (pi.pathname, errno);
- warning ("can't find mapped file for address 0x%x", addr);
- }
- }
- }
- return (fd);
-}
+#ifdef DYNAMIC_SYSCALLS
+ {
+ int callnum = find_syscall (pi, "execve");
+ if (callnum >= 0)
+ gdb_praddsysset (traced_syscall_exits, callnum);
+ callnum = find_syscall (pi, "ra_execve");
+ if (callnum >= 0)
+ gdb_praddsysset (traced_syscall_exits, callnum);
+ }
+#endif
+ status = proc_set_traced_sysexit (pi, traced_syscall_exits);
+ xfree (traced_syscall_exits);
+ if (!status)
+ return __LINE__;
-/* Attach to process PID, then initialize for debugging it
- and wait for the trace-trap that results from attaching. */
+#endif /* PRFS_STOPEXEC */
+ return 0;
+}
-static void
-procfs_attach (args, from_tty)
- char *args;
- int from_tty;
+static void
+procfs_attach (char *args, int from_tty)
{
char *exec_file;
- int pid;
+ int pid;
if (!args)
error_no_arg ("process-id to attach");
pid = atoi (args);
-
- if (pid == getpid()) /* Trying to masturbate? */
- error ("I refuse to debug myself!");
+ if (pid == getpid ())
+ error ("Attaching GDB to itself is not a good idea...");
if (from_tty)
{
- exec_file = (char *) get_exec_file (0);
+ exec_file = get_exec_file (0);
if (exec_file)
- printf ("Attaching program `%s', pid %d\n", exec_file, pid);
+ printf_filtered ("Attaching to program `%s', %s\n",
+ exec_file, target_pid_to_str (pid_to_ptid (pid)));
else
- printf ("Attaching pid %d\n", pid);
+ printf_filtered ("Attaching to %s\n",
+ target_pid_to_str (pid_to_ptid (pid)));
fflush (stdout);
}
-
- do_attach (pid);
- inferior_pid = pid;
+ inferior_ptid = do_attach (pid_to_ptid (pid));
push_target (&procfs_ops);
}
-
-/* Take a program previously attached to and detaches it.
- The program resumes execution and will no longer stop
- on signals, etc. We'd better not have left any breakpoints
- in the program or it'll die when it hits one. For this
- to work, it may be necessary for the process to have been
- previously attached. It *might* work if the program was
- started via the normal ptrace (PTRACE_TRACEME). */
-
-static void
-procfs_detach (args, from_tty)
- char *args;
- int from_tty;
+static void
+procfs_detach (char *args, int from_tty)
{
- int siggnal = 0;
+ char *exec_file;
+ int signo = 0;
if (from_tty)
{
- char *exec_file = get_exec_file (0);
+ exec_file = get_exec_file (0);
if (exec_file == 0)
exec_file = "";
- printf ("Detaching program: %s pid %d\n",
- exec_file, inferior_pid);
+ printf_filtered ("Detaching from program: %s %s\n",
+ exec_file, target_pid_to_str (inferior_ptid));
fflush (stdout);
}
if (args)
- siggnal = atoi (args);
+ signo = atoi (args);
- do_detach (siggnal);
- inferior_pid = 0;
+ do_detach (signo);
+ inferior_ptid = null_ptid;
unpush_target (&procfs_ops); /* Pop out of handling an inferior */
}
-/* Get ready to modify the registers array. On machines which store
- individual registers, this doesn't need to do anything. On machines
- which store all the registers in one fell swoop, this makes sure
- that registers contains all the registers from the program being
- debugged. */
-
-static void
-procfs_prepare_to_store ()
-{
-#ifdef CHILD_PREPARE_TO_STORE
- CHILD_PREPARE_TO_STORE ();
-#endif
-}
-
-/* Print status information about what we're accessing. */
-
-static void
-procfs_files_info (ignore)
- struct target_ops *ignore;
-{
- printf ("\tUsing the running image of %s process %d via /proc.\n",
- attach_flag? "attached": "child", inferior_pid);
-}
-
-/* ARGSUSED */
-static void
-procfs_open (arg, from_tty)
- char *arg;
- int from_tty;
+static ptid_t
+do_attach (ptid_t ptid)
{
- error ("Use the \"run\" command to start a Unix child process.");
-}
+ procinfo *pi;
+ int fail;
-/*
-
-LOCAL FUNCTION
-
- do_attach -- attach to an already existing process
-
-SYNOPSIS
-
- int do_attach (int pid)
-
-DESCRIPTION
-
- Attach to an already existing process with the specified process
- id. If the process is not already stopped, query whether to
- stop it or not.
-
-NOTES
+ if ((pi = create_procinfo (PIDGET (ptid), 0)) == NULL)
+ perror ("procfs: out of memory in 'attach'");
- The option of stopping at attach time is specific to the /proc
- versions of gdb. Versions using ptrace force the attachee
- to stop. (I have changed this version to do so, too. All you
-
-*/
-
-static int
-do_attach (pid)
- int pid;
-{
- int result;
-
- if (!open_proc_file (pid, &pi, O_RDWR))
- {
- perror_with_name (pi.pathname);
- /* NOTREACHED */
- }
-
- /* Get current status of process and if it is not already stopped,
- then stop it. Remember whether or not it was stopped when we first
- examined it. */
-
- if (ioctl (pi.fd, PIOCSTATUS, &pi.prstatus) < 0)
- {
- print_sys_errmsg (pi.pathname, errno);
- close_proc_file (&pi);
- error ("PIOCSTATUS failed");
- }
- if (pi.prstatus.pr_flags & (PR_STOPPED | PR_ISTOP))
+ if (!open_procinfo_files (pi, FD_CTL))
{
- pi.was_stopped = 1;
- }
- else
- {
- pi.was_stopped = 0;
- if (1 || query ("Process is currently running, stop it? "))
- {
- /* Make it run again when we close it. */
-#if defined (PIOCSET) /* New method */
- {
- long pr_flags;
- pr_flags = PR_RLC;
- result = ioctl (pi.fd, PIOCSET, &pr_flags);
- }
-#else
-#if defined (PIOCSRLC) /* Original method */
- result = ioctl (pi.fd, PIOCSRLC, 0);
-#endif
-#endif
- if (result < 0)
- {
- print_sys_errmsg (pi.pathname, errno);
- close_proc_file (&pi);
- error ("PIOCSRLC or PIOCSET failed");
- }
- if (ioctl (pi.fd, PIOCSTOP, &pi.prstatus) < 0)
- {
- print_sys_errmsg (pi.pathname, errno);
- close_proc_file (&pi);
- error ("PIOCSTOP failed");
- }
- pi.nopass_next_sigstop = 1;
- }
- else
- {
- printf ("Ok, gdb will wait for process %u to stop.\n", pid);
- }
+ fprintf_filtered (gdb_stderr, "procfs:%d -- ", __LINE__);
+ sprintf (errmsg, "do_attach: couldn't open /proc file for process %d",
+ PIDGET (ptid));
+ dead_procinfo (pi, errmsg, NOKILL);
}
- /* Remember some things about the inferior that we will, or might, change
- so that we can restore them when we detach. */
-
- ioctl (pi.fd, PIOCGTRACE, &pi.saved_trace);
- ioctl (pi.fd, PIOCGHOLD, &pi.saved_sighold);
- ioctl (pi.fd, PIOCGFAULT, &pi.saved_fltset);
- ioctl (pi.fd, PIOCGENTRY, &pi.saved_entryset);
- ioctl (pi.fd, PIOCGEXIT, &pi.saved_exitset);
-
- /* Set up trace and fault sets, as gdb expects them. */
-
- memset (&pi.prrun, 0, sizeof (pi.prrun));
- prfillset (&pi.prrun.pr_trace);
- procfs_notice_signals ();
- prfillset (&pi.prrun.pr_fault);
- prdelset (&pi.prrun.pr_fault, FLTPAGE);
- if (ioctl (pi.fd, PIOCSFAULT, &pi.prrun.pr_fault))
+ /* Stop the process (if it isn't already stopped). */
+ if (proc_flags (pi) & (PR_STOPPED | PR_ISTOP))
{
- print_sys_errmsg ("PIOCSFAULT failed", errno);
+ pi->was_stopped = 1;
+ proc_prettyprint_why (proc_why (pi), proc_what (pi), 1);
}
- if (ioctl (pi.fd, PIOCSTRACE, &pi.prrun.pr_trace))
+ else
{
- print_sys_errmsg ("PIOCSTRACE failed", errno);
+ pi->was_stopped = 0;
+ /* Set the process to run again when we close it. */
+ if (!proc_set_run_on_last_close (pi))
+ dead_procinfo (pi, "do_attach: couldn't set RLC.", NOKILL);
+
+ /* Now stop the process. */
+ if (!proc_stop_process (pi))
+ dead_procinfo (pi, "do_attach: couldn't stop the process.", NOKILL);
+ pi->ignore_next_sigstop = 1;
}
+ /* Save some of the /proc state to be restored if we detach. */
+ if (!proc_get_traced_faults (pi, &pi->saved_fltset))
+ dead_procinfo (pi, "do_attach: couldn't save traced faults.", NOKILL);
+ if (!proc_get_traced_signals (pi, &pi->saved_sigset))
+ dead_procinfo (pi, "do_attach: couldn't save traced signals.", NOKILL);
+ if (!proc_get_traced_sysentry (pi, pi->saved_entryset))
+ dead_procinfo (pi, "do_attach: couldn't save traced syscall entries.",
+ NOKILL);
+ if (!proc_get_traced_sysexit (pi, pi->saved_exitset))
+ dead_procinfo (pi, "do_attach: couldn't save traced syscall exits.",
+ NOKILL);
+ if (!proc_get_held_signals (pi, &pi->saved_sighold))
+ dead_procinfo (pi, "do_attach: couldn't save held signals.", NOKILL);
+
+ if ((fail = procfs_debug_inferior (pi)) != 0)
+ dead_procinfo (pi, "do_attach: failed in procfs_debug_inferior", NOKILL);
+
+ /* Let GDB know that the inferior was attached. */
attach_flag = 1;
- return (pid);
+ return MERGEPID (pi->pid, proc_get_current_thread (pi));
}
-/*
-
-LOCAL FUNCTION
-
- do_detach -- detach from an attached-to process
-
-SYNOPSIS
-
- void do_detach (int signal)
-
-DESCRIPTION
-
- Detach from the current attachee.
-
- If signal is non-zero, the attachee is started running again and sent
- the specified signal.
-
- If signal is zero and the attachee was not already stopped when we
- attached to it, then we make it runnable again when we detach.
-
- Otherwise, we query whether or not to make the attachee runnable
- again, since we may simply want to leave it in the state it was in
- when we attached.
-
- We report any problems, but do not consider them errors, since we
- MUST detach even if some things don't seem to go right. This may not
- be the ideal situation. (FIXME).
- */
-
static void
-do_detach (signal)
- int signal;
+do_detach (int signo)
{
- int result;
-
- if (signal)
- {
- set_proc_siginfo (&pi, signal);
- }
- if (ioctl (pi.fd, PIOCSEXIT, &pi.saved_exitset) < 0)
- {
- print_sys_errmsg (pi.pathname, errno);
- printf ("PIOCSEXIT failed.\n");
- }
- if (ioctl (pi.fd, PIOCSENTRY, &pi.saved_entryset) < 0)
- {
- print_sys_errmsg (pi.pathname, errno);
- printf ("PIOCSENTRY failed.\n");
- }
- if (ioctl (pi.fd, PIOCSTRACE, &pi.saved_trace) < 0)
- {
- print_sys_errmsg (pi.pathname, errno);
- printf ("PIOCSTRACE failed.\n");
- }
- if (ioctl (pi.fd, PIOCSHOLD, &pi.saved_sighold) < 0)
- {
- print_sys_errmsg (pi.pathname, errno);
- printf ("PIOSCHOLD failed.\n");
- }
- if (ioctl (pi.fd, PIOCSFAULT, &pi.saved_fltset) < 0)
- {
- print_sys_errmsg (pi.pathname, errno);
- printf ("PIOCSFAULT failed.\n");
- }
- if (ioctl (pi.fd, PIOCSTATUS, &pi.prstatus) < 0)
- {
- print_sys_errmsg (pi.pathname, errno);
- printf ("PIOCSTATUS failed.\n");
- }
- else
- {
- if (signal || (pi.prstatus.pr_flags & (PR_STOPPED | PR_ISTOP)))
- {
- if (signal || !pi.was_stopped ||
- query ("Was stopped when attached, make it runnable again? "))
- {
- /* Clear any fault that might have stopped it. */
- if (ioctl (pi.fd, PIOCCFAULT, 0))
- {
- print_sys_errmsg (pi.pathname, errno);
- printf ("PIOCCFAULT failed.\n");
- }
-
- /* Make it run again when we close it. */
-#if defined (PIOCSET) /* New method */
- {
- long pr_flags;
- pr_flags = PR_RLC;
- result = ioctl (pi.fd, PIOCSET, &pr_flags);
- }
-#else
-#if defined (PIOCSRLC) /* Original method */
- result = ioctl (pi.fd, PIOCSRLC, 0);
-#endif
-#endif
- if (result)
- {
- print_sys_errmsg (pi.pathname, errno);
- printf ("PIOCSRLC or PIOCSET failed.\n");
- }
- }
- }
- }
- close_proc_file (&pi);
- attach_flag = 0;
-}
-
-/*
-
-LOCAL FUNCTION
-
- procfs_wait -- emulate wait() as much as possible
- Wait for child to do something. Return pid of child, or -1 in case
- of error; store status through argument pointer STATUS.
-
-
-SYNOPSIS
+ procinfo *pi;
- int procfs_wait (int *statloc)
+ /* Find procinfo for the main process */
+ pi = find_procinfo_or_die (PIDGET (inferior_ptid), 0); /* FIXME: threads */
+ if (signo)
+ if (!proc_set_current_signal (pi, signo))
+ proc_warn (pi, "do_detach, set_current_signal", __LINE__);
-DESCRIPTION
+ if (!proc_set_traced_signals (pi, &pi->saved_sigset))
+ proc_warn (pi, "do_detach, set_traced_signal", __LINE__);
- Try to emulate wait() as much as possible. Not sure why we can't
- just use wait(), but it seems to have problems when applied to a
- process being controlled with the /proc interface.
+ if (!proc_set_traced_faults (pi, &pi->saved_fltset))
+ proc_warn (pi, "do_detach, set_traced_faults", __LINE__);
-NOTES
-
- We have a race problem here with no obvious solution. We need to let
- the inferior run until it stops on an event of interest, which means
- that we need to use the PIOCWSTOP ioctl. However, we cannot use this
- ioctl if the process is already stopped on something that is not an
- event of interest, or the call will hang indefinitely. Thus we first
- use PIOCSTATUS to see if the process is not stopped. If not, then we
- use PIOCWSTOP. But during the window between the two, if the process
- stops for any reason that is not an event of interest (such as a job
- control signal) then gdb will hang. One possible workaround is to set
- an alarm to wake up every minute of so and check to see if the process
- is still running, and if so, then reissue the PIOCWSTOP. But this is
- a real kludge, so has not been implemented. FIXME: investigate
- alternatives.
-
- FIXME: Investigate why wait() seems to have problems with programs
- being control by /proc routines.
-
- */
-
-static int
-procfs_wait (statloc)
- int *statloc;
-{
- short what;
- short why;
- int statval = 0;
- int checkerr = 0;
- int rtnval = -1;
-
- if (ioctl (pi.fd, PIOCSTATUS, &pi.prstatus) < 0)
- {
- checkerr++;
- }
- else if (!(pi.prstatus.pr_flags & (PR_STOPPED | PR_ISTOP)))
- {
- if (attach_flag)
- set_sigint_trap(); /* Causes SIGINT to be passed on to the
- attached process. */
+ if (!proc_set_traced_sysentry (pi, pi->saved_entryset))
+ proc_warn (pi, "do_detach, set_traced_sysentry", __LINE__);
- if (ioctl (pi.fd, PIOCWSTOP, &pi.prstatus) < 0)
- {
- checkerr++;
- }
+ if (!proc_set_traced_sysexit (pi, pi->saved_exitset))
+ proc_warn (pi, "do_detach, set_traced_sysexit", __LINE__);
- if (attach_flag)
- clear_sigint_trap();
- }
- if (checkerr)
- {
- if (errno == ENOENT)
- {
- rtnval = wait (&statval);
- if (rtnval != inferior_pid)
- {
- print_sys_errmsg (pi.pathname, errno);
- error ("PIOCWSTOP, wait failed, returned %d", rtnval);
- /* NOTREACHED */
- }
- }
- else
- {
- print_sys_errmsg (pi.pathname, errno);
- error ("PIOCSTATUS or PIOCWSTOP failed.");
- /* NOTREACHED */
- }
- }
- else if (pi.prstatus.pr_flags & (PR_STOPPED | PR_ISTOP))
- {
- rtnval = pi.prstatus.pr_pid;
- why = pi.prstatus.pr_why;
- what = pi.prstatus.pr_what;
- if (why == PR_SIGNALLED)
- {
- statval = (what << 8) | 0177;
- }
- else if ((why == PR_SYSEXIT)
- &&
- (
-#ifdef SYS_exec
- what == SYS_exec
-#else
- 0 == 0
-#endif
-#ifdef SYS_execve
- || what == SYS_execve
-#endif
-#ifdef SYS_execv
- || what == SYS_execv
-#endif
- ))
- {
- statval = (SIGTRAP << 8) | 0177;
- }
- else if (why == PR_REQUESTED)
- {
- statval = (SIGSTOP << 8) | 0177;
- }
- else if (why == PR_JOBCONTROL)
- {
- statval = (what << 8) | 0177;
- }
- else if (why == PR_FAULTED)
- {
- switch (what)
- {
- case FLTPRIV:
- case FLTILL:
- statval = (SIGILL << 8) | 0177;
- break;
- case FLTBPT:
- case FLTTRACE:
- statval = (SIGTRAP << 8) | 0177;
- break;
- case FLTSTACK:
- case FLTACCESS:
- case FLTBOUNDS:
- statval = (SIGSEGV << 8) | 0177;
- break;
- case FLTIOVF:
- case FLTIZDIV:
- case FLTFPE:
- statval = (SIGFPE << 8) | 0177;
- break;
- case FLTPAGE: /* Recoverable page fault */
- default:
- rtnval = -1;
- error ("PIOCWSTOP, unknown why %d, what %d", why, what);
- /* NOTREACHED */
- }
- }
- else
- {
- rtnval = -1;
- error ("PIOCWSTOP, unknown why %d, what %d", why, what);
- /* NOTREACHED */
- }
- }
- else
- {
- error ("PIOCWSTOP, stopped for unknown/unhandled reason, flags %#x",
- pi.prstatus.pr_flags);
- /* NOTREACHED */
- }
+ if (!proc_set_held_signals (pi, &pi->saved_sighold))
+ proc_warn (pi, "do_detach, set_held_signals", __LINE__);
- if (statloc)
- {
- *statloc = statval;
- }
+ if (signo || (proc_flags (pi) & (PR_STOPPED | PR_ISTOP)))
+ if (signo || !(pi->was_stopped) ||
+ query ("Was stopped when attached, make it runnable again? "))
+ {
+ /* Clear any pending signal. */
+ if (!proc_clear_current_fault (pi))
+ proc_warn (pi, "do_detach, clear_current_fault", __LINE__);
- if (rtnval == -1) /* No more children to wait for */
- {
- fprintf (stderr, "Child process unexpectedly missing.\n");
- *statloc = 42; /* Claim it exited with signal 42 */
- return rtnval;
- }
+ if (!proc_set_run_on_last_close (pi))
+ proc_warn (pi, "do_detach, set_rlc", __LINE__);
+ }
- return (rtnval);
+ attach_flag = 0;
+ destroy_procinfo (pi);
}
/*
+ * fetch_registers
+ *
+ * Since the /proc interface cannot give us individual registers,
+ * we pay no attention to the (regno) argument, and just fetch them all.
+ * This results in the possibility that we will do unnecessarily many
+ * fetches, since we may be called repeatedly for individual registers.
+ * So we cache the results, and mark the cache invalid when the process
+ * is resumed.
+ */
-LOCAL FUNCTION
-
- set_proc_siginfo - set a process's current signal info
+static void
+procfs_fetch_registers (int regno)
+{
+ gdb_fpregset_t *fpregs;
+ gdb_gregset_t *gregs;
+ procinfo *pi;
+ int pid;
+ int tid;
-SYNOPSIS
+ pid = PIDGET (inferior_ptid);
+ tid = TIDGET (inferior_ptid);
- void set_proc_siginfo (struct procinfo *pip, int signo);
+ /* First look up procinfo for the main process. */
+ pi = find_procinfo_or_die (pid, 0);
-DESCRIPTION
+ /* If the event thread is not the same as GDB's requested thread
+ (ie. inferior_ptid), then look up procinfo for the requested
+ thread. */
+ if ((tid != 0) &&
+ (tid != proc_get_current_thread (pi)))
+ pi = find_procinfo_or_die (pid, tid);
- Given a pointer to a process info struct in PIP and a signal number
- in SIGNO, set the process's current signal and its associated signal
- information. The signal will be delivered to the process immediately
- after execution is resumed, even if it is being held. In addition,
- this particular delivery will not cause another PR_SIGNALLED stop
- even if the signal is being traced.
+ if (pi == NULL)
+ error ("procfs: fetch_registers failed to find procinfo for %s",
+ target_pid_to_str (inferior_ptid));
- If we are not delivering the same signal that the prstatus siginfo
- struct contains information about, then synthesize a siginfo struct
- to match the signal we are doing to deliver, make it of the type
- "generated by a user process", and send this synthesized copy. When
- used to set the inferior's signal state, this will be required if we
- are not currently stopped because of a traced signal, or if we decide
- to continue with a different signal.
+ if ((gregs = proc_get_gregs (pi)) == NULL)
+ proc_error (pi, "fetch_registers, get_gregs", __LINE__);
- Note that when continuing the inferior from a stop due to receipt
- of a traced signal, we either have set PRCSIG to clear the existing
- signal, or we have to call this function to do a PIOCSSIG with either
- the existing siginfo struct from pr_info, or one we have synthesized
- appropriately for the signal we want to deliver. Otherwise if the
- signal is still being traced, the inferior will immediately stop
- again.
+ supply_gregset (gregs);
- See siginfo(5) for more details.
-*/
+ if (FP0_REGNUM >= 0) /* need floating point? */
+ {
+ if ((regno >= 0 && regno < FP0_REGNUM) ||
+ regno == PC_REGNUM ||
+ (NPC_REGNUM >= 0 && regno == NPC_REGNUM) ||
+ regno == FP_REGNUM ||
+ regno == SP_REGNUM)
+ return; /* not a floating point register */
-static void
-set_proc_siginfo (pip, signo)
- struct procinfo *pip;
- int signo;
-{
- struct siginfo newsiginfo;
- struct siginfo *sip;
+ if ((fpregs = proc_get_fpregs (pi)) == NULL)
+ proc_error (pi, "fetch_registers, get_fpregs", __LINE__);
- if (pip -> valid)
- {
- if (signo == pip -> prstatus.pr_info.si_signo)
- {
- sip = &pip -> prstatus.pr_info;
- }
- else
- {
- memset ((char *) &newsiginfo, 0, sizeof (newsiginfo));
- sip = &newsiginfo;
- sip -> si_signo = signo;
- sip -> si_code = 0;
- sip -> si_errno = 0;
- sip -> si_pid = getpid ();
- sip -> si_uid = getuid ();
- }
- if (ioctl (pip -> fd, PIOCSSIG, sip) < 0)
- {
- print_sys_errmsg (pip -> pathname, errno);
- warning ("PIOCSSIG failed");
- }
+ supply_fpregset (fpregs);
}
}
-/* Resume execution of the inferior process. If STEP is nozero, then
- just single step it. If SIGNAL is nonzero, restart it with that
- signal activated. */
+/* Get ready to modify the registers array. On machines which store
+ individual registers, this doesn't need to do anything. On
+ machines which store all the registers in one fell swoop, such as
+ /proc, this makes sure that registers contains all the registers
+ from the program being debugged. */
static void
-procfs_resume (step, signo)
- int step;
- int signo;
+procfs_prepare_to_store (void)
{
- int signal_to_pass;
-
- errno = 0;
- pi.prrun.pr_flags = PRSTRACE | PRSFAULT | PRCFAULT;
-
-#if 0
- /* It should not be necessary. If the user explicitly changes the value,
- value_assign calls write_register_bytes, which writes it. */
-/* It may not be absolutely necessary to specify the PC value for
- restarting, but to be safe we use the value that gdb considers
- to be current. One case where this might be necessary is if the
- user explicitly changes the PC value that gdb considers to be
- current. FIXME: Investigate if this is necessary or not. */
-
-#ifdef PRSVADDR_BROKEN
-/* Can't do this under Solaris running on a Sparc, as there seems to be no
- place to put nPC. In fact, if you use this, nPC seems to be set to some
- random garbage. We have to rely on the fact that PC and nPC have been
- written previously via PIOCSREG during a register flush. */
-
- pi.prrun.pr_vaddr = (caddr_t) *(int *) ®isters[REGISTER_BYTE (PC_REGNUM)];
- pi.prrun.pr_flags != PRSVADDR;
-#endif
-#endif
-
- if (signo == SIGSTOP && pi.nopass_next_sigstop)
- /* When attaching to a child process, if we forced it to stop with
- a PIOCSTOP, then we will have set the nopass_next_sigstop flag.
- Upon resuming the first time after such a stop, we explicitly
- inhibit sending it another SIGSTOP, which would be the normal
- result of default signal handling. One potential drawback to
- this is that we will also ignore any attempt to by the user
- to explicitly continue after the attach with a SIGSTOP. Ultimately
- this problem should be dealt with by making the routines that
- deal with the inferior a little smarter, and possibly even allow
- an inferior to continue running at the same time as gdb. (FIXME?) */
- signal_to_pass = 0;
- else if (signo == SIGTSTP
- && pi.prstatus.pr_cursig == SIGTSTP
- && pi.prstatus.pr_action.sa_handler == SIG_DFL)
-
- /* We are about to pass the inferior a SIGTSTP whose action is
- SIG_DFL. The SIG_DFL action for a SIGTSTP is to stop
- (notifying the parent via wait()), and then keep going from the
- same place when the parent is ready for you to keep going. So
- under the debugger, it should do nothing (as if the program had
- been stopped and then later resumed. Under ptrace, this
- happens for us, but under /proc, the system obligingly stops
- the process, and wait_for_inferior would have no way of
- distinguishing that type of stop (which indicates that we
- should just start it again), with a stop due to the pr_trace
- field of the prrun_t struct.
-
- Note that if the SIGTSTP is being caught, we *do* need to pass it,
- because the handler needs to get executed. */
- signal_to_pass = 0;
- else
- signal_to_pass = signo;
-
- if (signal_to_pass)
- {
- set_proc_siginfo (&pi, signal_to_pass);
- }
- else
- {
- pi.prrun.pr_flags |= PRCSIG;
- }
- pi.nopass_next_sigstop = 0;
- if (step)
- {
- pi.prrun.pr_flags |= PRSTEP;
- }
- if (ioctl (pi.fd, PIOCRUN, &pi.prrun) != 0)
- {
- perror_with_name (pi.pathname);
- /* NOTREACHED */
- }
+#ifdef CHILD_PREPARE_TO_STORE
+ CHILD_PREPARE_TO_STORE ();
+#endif
}
/*
+ * store_registers
+ *
+ * Since the /proc interface will not read individual registers,
+ * we will cache these requests until the process is resumed, and
+ * only then write them back to the inferior process.
+ *
+ * FIXME: is that a really bad idea? Have to think about cases
+ * where writing one register might affect the value of others, etc.
+ */
-LOCAL FUNCTION
+static void
+procfs_store_registers (int regno)
+{
+ gdb_fpregset_t *fpregs;
+ gdb_gregset_t *gregs;
+ procinfo *pi;
+ int pid;
+ int tid;
- procfs_fetch_registers -- fetch current registers from inferior
+ pid = PIDGET (inferior_ptid);
+ tid = TIDGET (inferior_ptid);
-SYNOPSIS
+ /* First find procinfo for main process */
+ pi = find_procinfo_or_die (pid, 0);
- void procfs_fetch_registers (int regno)
+ /* If current lwp for process is not the same as requested thread
+ (ie. inferior_ptid), then find procinfo for the requested thread. */
-DESCRIPTION
+ if ((tid != 0) &&
+ (tid != proc_get_current_thread (pi)))
+ pi = find_procinfo_or_die (pid, tid);
- Read the current values of the inferior's registers, both the
- general register set and floating point registers (if supported)
- and update gdb's idea of their current values.
+ if (pi == NULL)
+ error ("procfs: store_registers: failed to find procinfo for %s",
+ target_pid_to_str (inferior_ptid));
-*/
+ if ((gregs = proc_get_gregs (pi)) == NULL)
+ proc_error (pi, "store_registers, get_gregs", __LINE__);
-static void
-procfs_fetch_registers (regno)
- int regno;
-{
- if (ioctl (pi.fd, PIOCGREG, &pi.gregset) != -1)
- {
- supply_gregset (&pi.gregset);
- }
-#if defined (FP0_REGNUM)
- if (ioctl (pi.fd, PIOCGFPREG, &pi.fpregset) != -1)
+ fill_gregset (gregs, regno);
+ if (!proc_set_gregs (pi))
+ proc_error (pi, "store_registers, set_gregs", __LINE__);
+
+ if (FP0_REGNUM >= 0) /* need floating point? */
{
- supply_fpregset (&pi.fpregset);
+ if ((regno >= 0 && regno < FP0_REGNUM) ||
+ regno == PC_REGNUM ||
+ (NPC_REGNUM >= 0 && regno == NPC_REGNUM) ||
+ regno == FP_REGNUM ||
+ regno == SP_REGNUM)
+ return; /* not a floating point register */
+
+ if ((fpregs = proc_get_fpregs (pi)) == NULL)
+ proc_error (pi, "store_registers, get_fpregs", __LINE__);
+
+ fill_fpregset (fpregs, regno);
+ if (!proc_set_fpregs (pi))
+ proc_error (pi, "store_registers, set_fpregs", __LINE__);
}
-#endif
}
-/*
-
-LOCAL FUNCTION
+static int
+syscall_is_lwp_exit (procinfo *pi, int scall)
+{
- proc_init_failed - called whenever /proc access initialization fails
+#ifdef SYS_lwp_exit
+ if (scall == SYS_lwp_exit)
+ return 1;
+#endif
+#ifdef SYS_lwpexit
+ if (scall == SYS_lwpexit)
+ return 1;
+#endif
+ return 0;
+}
-SYNOPSIS
+static int
+syscall_is_exit (procinfo *pi, int scall)
+{
+#ifdef SYS_exit
+ if (scall == SYS_exit)
+ return 1;
+#endif
+#ifdef DYNAMIC_SYSCALLS
+ if (find_syscall (pi, "_exit") == scall)
+ return 1;
+#endif
+ return 0;
+}
- static void proc_init_failed (char *why)
+static int
+syscall_is_exec (procinfo *pi, int scall)
+{
+#ifdef SYS_exec
+ if (scall == SYS_exec)
+ return 1;
+#endif
+#ifdef SYS_execv
+ if (scall == SYS_execv)
+ return 1;
+#endif
+#ifdef SYS_execve
+ if (scall == SYS_execve)
+ return 1;
+#endif
+#ifdef DYNAMIC_SYSCALLS
+ if (find_syscall (pi, "_execve"))
+ return 1;
+ if (find_syscall (pi, "ra_execve"))
+ return 1;
+#endif
+ return 0;
+}
-DESCRIPTION
+static int
+syscall_is_lwp_create (procinfo *pi, int scall)
+{
+#ifdef SYS_lwp_create
+ if (scall == SYS_lwp_create)
+ return 1;
+#endif
+#ifdef SYS_lwpcreate
+ if (scall == SYS_lwpcreate)
+ return 1;
+#endif
+ return 0;
+}
- This function is called whenever initialization of access to a /proc
- entry fails. It prints a suitable error message, does some cleanup,
- and then invokes the standard error processing routine which dumps
- us back into the command loop.
+/*
+ * Function: target_wait
+ *
+ * Retrieve the next stop event from the child process.
+ * If child has not stopped yet, wait for it to stop.
+ * Translate /proc eventcodes (or possibly wait eventcodes)
+ * into gdb internal event codes.
+ *
+ * Return: id of process (and possibly thread) that incurred the event.
+ * event codes are returned thru a pointer parameter.
*/
-static void
-proc_init_failed (why)
- char *why;
+static ptid_t
+procfs_wait (ptid_t ptid, struct target_waitstatus *status)
{
- print_sys_errmsg (pi.pathname, errno);
- kill (pi.pid, SIGKILL);
- close_proc_file (&pi);
- error (why);
- /* NOTREACHED */
-}
+ /* First cut: loosely based on original version 2.1 */
+ procinfo *pi;
+ int wstat;
+ int temp_tid;
+ ptid_t retval, temp_ptid;
+ int why, what, flags;
+ int retry = 0;
+
+wait_again:
+
+ retry++;
+ wstat = 0;
+ retval = pid_to_ptid (-1);
+
+ /* Find procinfo for main process */
+ pi = find_procinfo_or_die (PIDGET (inferior_ptid), 0);
+ if (pi)
+ {
+ /* We must assume that the status is stale now... */
+ pi->status_valid = 0;
+ pi->gregs_valid = 0;
+ pi->fpregs_valid = 0;
+
+#if 0 /* just try this out... */
+ flags = proc_flags (pi);
+ why = proc_why (pi);
+ if ((flags & PR_STOPPED) && (why == PR_REQUESTED))
+ pi->status_valid = 0; /* re-read again, IMMEDIATELY... */
+#endif
+ /* If child is not stopped, wait for it to stop. */
+ if (!(proc_flags (pi) & (PR_STOPPED | PR_ISTOP)) &&
+ !proc_wait_for_stop (pi))
+ {
+ /* wait_for_stop failed: has the child terminated? */
+ if (errno == ENOENT)
+ {
+ int wait_retval;
-/*
+ /* /proc file not found; presumably child has terminated. */
+ wait_retval = wait (&wstat); /* "wait" for the child's exit */
+
+ if (wait_retval != PIDGET (inferior_ptid)) /* wrong child? */
+ error ("procfs: couldn't stop process %d: wait returned %d\n",
+ PIDGET (inferior_ptid), wait_retval);
+ /* FIXME: might I not just use waitpid?
+ Or try find_procinfo to see if I know about this child? */
+ retval = pid_to_ptid (wait_retval);
+ }
+ else if (errno == EINTR)
+ goto wait_again;
+ else
+ {
+ /* Unknown error from wait_for_stop. */
+ proc_error (pi, "target_wait (wait_for_stop)", __LINE__);
+ }
+ }
+ else
+ {
+ /* This long block is reached if either:
+ a) the child was already stopped, or
+ b) we successfully waited for the child with wait_for_stop.
+ This block will analyze the /proc status, and translate it
+ into a waitstatus for GDB.
-LOCAL FUNCTION
+ If we actually had to call wait because the /proc file
+ is gone (child terminated), then we skip this block,
+ because we already have a waitstatus. */
- close_proc_file - close any currently open /proc entry
+ flags = proc_flags (pi);
+ why = proc_why (pi);
+ what = proc_what (pi);
-SYNOPSIS
+ if (flags & (PR_STOPPED | PR_ISTOP))
+ {
+#ifdef PR_ASYNC
+ /* If it's running async (for single_thread control),
+ set it back to normal again. */
+ if (flags & PR_ASYNC)
+ if (!proc_unset_async (pi))
+ proc_error (pi, "target_wait, unset_async", __LINE__);
+#endif
+
+ if (info_verbose)
+ proc_prettyprint_why (why, what, 1);
+
+ /* The 'pid' we will return to GDB is composed of
+ the process ID plus the lwp ID. */
+ retval = MERGEPID (pi->pid, proc_get_current_thread (pi));
+
+ switch (why) {
+ case PR_SIGNALLED:
+ wstat = (what << 8) | 0177;
+ break;
+ case PR_SYSENTRY:
+ if (syscall_is_lwp_exit (pi, what))
+ {
+ printf_filtered ("[%s exited]\n",
+ target_pid_to_str (retval));
+ delete_thread (retval);
+ status->kind = TARGET_WAITKIND_SPURIOUS;
+ return retval;
+ }
+ else if (syscall_is_exit (pi, what))
+ {
+ /* Handle SYS_exit call only */
+ /* Stopped at entry to SYS_exit.
+ Make it runnable, resume it, then use
+ the wait system call to get its exit code.
+ Proc_run_process always clears the current
+ fault and signal.
+ Then return its exit status. */
+ pi->status_valid = 0;
+ wstat = 0;
+ /* FIXME: what we should do is return
+ TARGET_WAITKIND_SPURIOUS. */
+ if (!proc_run_process (pi, 0, 0))
+ proc_error (pi, "target_wait, run_process", __LINE__);
+ if (attach_flag)
+ {
+ /* Don't call wait: simulate waiting for exit,
+ return a "success" exit code. Bogus: what if
+ it returns something else? */
+ wstat = 0;
+ retval = inferior_ptid; /* ? ? ? */
+ }
+ else
+ {
+ int temp = wait (&wstat);
+
+ /* FIXME: shouldn't I make sure I get the right
+ event from the right process? If (for
+ instance) I have killed an earlier inferior
+ process but failed to clean up after it
+ somehow, I could get its termination event
+ here. */
+
+ /* If wait returns -1, that's what we return to GDB. */
+ if (temp < 0)
+ retval = pid_to_ptid (temp);
+ }
+ }
+ else
+ {
+ printf_filtered ("procfs: trapped on entry to ");
+ proc_prettyprint_syscall (proc_what (pi), 0);
+ printf_filtered ("\n");
+#ifndef PIOCSSPCACT
+ {
+ long i, nsysargs, *sysargs;
+
+ if ((nsysargs = proc_nsysarg (pi)) > 0 &&
+ (sysargs = proc_sysargs (pi)) != NULL)
+ {
+ printf_filtered ("%ld syscall arguments:\n", nsysargs);
+ for (i = 0; i < nsysargs; i++)
+ printf_filtered ("#%ld: 0x%08lx\n",
+ i, sysargs[i]);
+ }
+
+ }
+#endif
+ if (status)
+ {
+ /* How to exit gracefully, returning "unknown event" */
+ status->kind = TARGET_WAITKIND_SPURIOUS;
+ return inferior_ptid;
+ }
+ else
+ {
+ /* How to keep going without returning to wfi: */
+ target_resume (ptid, 0, TARGET_SIGNAL_0);
+ goto wait_again;
+ }
+ }
+ break;
+ case PR_SYSEXIT:
+ if (syscall_is_exec (pi, what))
+ {
+ /* Hopefully this is our own "fork-child" execing
+ the real child. Hoax this event into a trap, and
+ GDB will see the child about to execute its start
+ address. */
+ wstat = (SIGTRAP << 8) | 0177;
+ }
+ else if (syscall_is_lwp_create (pi, what))
+ {
+ /*
+ * This syscall is somewhat like fork/exec.
+ * We will get the event twice: once for the parent LWP,
+ * and once for the child. We should already know about
+ * the parent LWP, but the child will be new to us. So,
+ * whenever we get this event, if it represents a new
+ * thread, simply add the thread to the list.
+ */
+
+ /* If not in procinfo list, add it. */
+ temp_tid = proc_get_current_thread (pi);
+ if (!find_procinfo (pi->pid, temp_tid))
+ create_procinfo (pi->pid, temp_tid);
+
+ temp_ptid = MERGEPID (pi->pid, temp_tid);
+ /* If not in GDB's thread list, add it. */
+ if (!in_thread_list (temp_ptid))
+ {
+ printf_filtered ("[New %s]\n",
+ target_pid_to_str (temp_ptid));
+ add_thread (temp_ptid);
+ }
+ /* Return to WFI, but tell it to immediately resume. */
+ status->kind = TARGET_WAITKIND_SPURIOUS;
+ return inferior_ptid;
+ }
+ else if (syscall_is_lwp_exit (pi, what))
+ {
+ printf_filtered ("[%s exited]\n",
+ target_pid_to_str (retval));
+ delete_thread (retval);
+ status->kind = TARGET_WAITKIND_SPURIOUS;
+ return retval;
+ }
+ else if (0)
+ {
+ /* FIXME: Do we need to handle SYS_sproc,
+ SYS_fork, or SYS_vfork here? The old procfs
+ seemed to use this event to handle threads on
+ older (non-LWP) systems, where I'm assuming
+ that threads were actually separate processes.
+ Irix, maybe? Anyway, low priority for now. */
+ }
+ else
+ {
+ printf_filtered ("procfs: trapped on exit from ");
+ proc_prettyprint_syscall (proc_what (pi), 0);
+ printf_filtered ("\n");
+#ifndef PIOCSSPCACT
+ {
+ long i, nsysargs, *sysargs;
+
+ if ((nsysargs = proc_nsysarg (pi)) > 0 &&
+ (sysargs = proc_sysargs (pi)) != NULL)
+ {
+ printf_filtered ("%ld syscall arguments:\n", nsysargs);
+ for (i = 0; i < nsysargs; i++)
+ printf_filtered ("#%ld: 0x%08lx\n",
+ i, sysargs[i]);
+ }
+ }
+#endif
+ status->kind = TARGET_WAITKIND_SPURIOUS;
+ return inferior_ptid;
+ }
+ break;
+ case PR_REQUESTED:
+#if 0 /* FIXME */
+ wstat = (SIGSTOP << 8) | 0177;
+ break;
+#else
+ if (retry < 5)
+ {
+ printf_filtered ("Retry #%d:\n", retry);
+ pi->status_valid = 0;
+ goto wait_again;
+ }
+ else
+ {
+ /* If not in procinfo list, add it. */
+ temp_tid = proc_get_current_thread (pi);
+ if (!find_procinfo (pi->pid, temp_tid))
+ create_procinfo (pi->pid, temp_tid);
+
+ /* If not in GDB's thread list, add it. */
+ temp_ptid = MERGEPID (pi->pid, temp_tid);
+ if (!in_thread_list (temp_ptid))
+ {
+ printf_filtered ("[New %s]\n",
+ target_pid_to_str (temp_ptid));
+ add_thread (temp_ptid);
+ }
+
+ status->kind = TARGET_WAITKIND_STOPPED;
+ status->value.sig = 0;
+ return retval;
+ }
+#endif
+ case PR_JOBCONTROL:
+ wstat = (what << 8) | 0177;
+ break;
+ case PR_FAULTED:
+ switch (what) { /* FIXME: FAULTED_USE_SIGINFO */
+#ifdef FLTWATCH
+ case FLTWATCH:
+ wstat = (SIGTRAP << 8) | 0177;
+ break;
+#endif
+#ifdef FLTKWATCH
+ case FLTKWATCH:
+ wstat = (SIGTRAP << 8) | 0177;
+ break;
+#endif
+ /* FIXME: use si_signo where possible. */
+ case FLTPRIV:
+#if (FLTILL != FLTPRIV) /* avoid "duplicate case" error */
+ case FLTILL:
+#endif
+ wstat = (SIGILL << 8) | 0177;
+ break;
+ case FLTBPT:
+#if (FLTTRACE != FLTBPT) /* avoid "duplicate case" error */
+ case FLTTRACE:
+#endif
+ wstat = (SIGTRAP << 8) | 0177;
+ break;
+ case FLTSTACK:
+ case FLTACCESS:
+#if (FLTBOUNDS != FLTSTACK) /* avoid "duplicate case" error */
+ case FLTBOUNDS:
+#endif
+ wstat = (SIGSEGV << 8) | 0177;
+ break;
+ case FLTIOVF:
+ case FLTIZDIV:
+#if (FLTFPE != FLTIOVF) /* avoid "duplicate case" error */
+ case FLTFPE:
+#endif
+ wstat = (SIGFPE << 8) | 0177;
+ break;
+ case FLTPAGE: /* Recoverable page fault */
+ default: /* FIXME: use si_signo if possible for fault */
+ retval = pid_to_ptid (-1);
+ printf_filtered ("procfs:%d -- ", __LINE__);
+ printf_filtered ("child stopped for unknown reason:\n");
+ proc_prettyprint_why (why, what, 1);
+ error ("... giving up...");
+ break;
+ }
+ break; /* case PR_FAULTED: */
+ default: /* switch (why) unmatched */
+ printf_filtered ("procfs:%d -- ", __LINE__);
+ printf_filtered ("child stopped for unknown reason:\n");
+ proc_prettyprint_why (why, what, 1);
+ error ("... giving up...");
+ break;
+ }
+ /*
+ * Got this far without error:
+ * If retval isn't in the threads database, add it.
+ */
+ if (PIDGET (retval) > 0 &&
+ !ptid_equal (retval, inferior_ptid) &&
+ !in_thread_list (retval))
+ {
+ /*
+ * We have a new thread.
+ * We need to add it both to GDB's list and to our own.
+ * If we don't create a procinfo, resume may be unhappy
+ * later.
+ */
+ printf_filtered ("[New %s]\n", target_pid_to_str (retval));
+ add_thread (retval);
+ if (find_procinfo (PIDGET (retval), TIDGET (retval)) == NULL)
+ create_procinfo (PIDGET (retval), TIDGET (retval));
+
+ /* In addition, it's possible that this is the first
+ * new thread we've seen, in which case we may not
+ * have created entries for inferior_ptid yet.
+ */
+ if (TIDGET (inferior_ptid) != 0)
+ {
+ if (!in_thread_list (inferior_ptid))
+ add_thread (inferior_ptid);
+ if (find_procinfo (PIDGET (inferior_ptid),
+ TIDGET (inferior_ptid)) == NULL)
+ create_procinfo (PIDGET (inferior_ptid),
+ TIDGET (inferior_ptid));
+ }
+ }
+ }
+ else /* flags do not indicate STOPPED */
+ {
+ /* surely this can't happen... */
+ printf_filtered ("procfs:%d -- process not stopped.\n",
+ __LINE__);
+ proc_prettyprint_flags (flags, 1);
+ error ("procfs: ...giving up...");
+ }
+ }
- static void close_proc_file (struct procinfo *pip)
+ if (status)
+ store_waitstatus (status, wstat);
+ }
-DESCRIPTION
+ return retval;
+}
- Close any currently open /proc entry and mark the process information
- entry as invalid. In order to ensure that we don't try to reuse any
- stale information, the pid, fd, and pathnames are explicitly
- invalidated, which may be overkill.
+/* Transfer LEN bytes between GDB address MYADDR and target address
+ MEMADDR. If DOWRITE is non-zero, transfer them to the target,
+ otherwise transfer them from the target. TARGET is unused.
- */
+ The return value is 0 if an error occurred or no bytes were
+ transferred. Otherwise, it will be a positive value which
+ indicates the number of bytes transferred between gdb and the
+ target. (Note that the interface also makes provisions for
+ negative values, but this capability isn't implemented here.) */
-static void
-close_proc_file (pip)
- struct procinfo *pip;
+static int
+procfs_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int dowrite,
+ struct mem_attrib *attrib, struct target_ops *target)
{
- pip -> pid = 0;
- if (pip -> valid)
+ procinfo *pi;
+ int nbytes = 0;
+
+ /* Find procinfo for main process */
+ pi = find_procinfo_or_die (PIDGET (inferior_ptid), 0);
+ if (pi->as_fd == 0 &&
+ open_procinfo_files (pi, FD_AS) == 0)
{
- close (pip -> fd);
+ proc_warn (pi, "xfer_memory, open_proc_files", __LINE__);
+ return 0;
}
- pip -> fd = -1;
- if (pip -> pathname)
+
+ if (lseek (pi->as_fd, (off_t) memaddr, SEEK_SET) == (off_t) memaddr)
{
- free (pip -> pathname);
- pip -> pathname = NULL;
+ if (dowrite)
+ {
+#ifdef NEW_PROC_API
+ PROCFS_NOTE ("write memory: ");
+#else
+ PROCFS_NOTE ("write memory: \n");
+#endif
+ nbytes = write (pi->as_fd, myaddr, len);
+ }
+ else
+ {
+ PROCFS_NOTE ("read memory: \n");
+ nbytes = read (pi->as_fd, myaddr, len);
+ }
+ if (nbytes < 0)
+ {
+ nbytes = 0;
+ }
}
- pip -> valid = 0;
+ return nbytes;
}
/*
+ * Function: invalidate_cache
+ *
+ * Called by target_resume before making child runnable.
+ * Mark cached registers and status's invalid.
+ * If there are "dirty" caches that need to be written back
+ * to the child process, do that.
+ *
+ * File descriptors are also cached.
+ * As they are a limited resource, we cannot hold onto them indefinitely.
+ * However, as they are expensive to open, we don't want to throw them
+ * away indescriminately either. As a compromise, we will keep the
+ * file descriptors for the parent process, but discard any file
+ * descriptors we may have accumulated for the threads.
+ *
+ * Return value:
+ * As this function is called by iterate_over_threads, it always
+ * returns zero (so that iterate_over_threads will keep iterating).
+ */
-LOCAL FUNCTION
-
- open_proc_file - open a /proc entry for a given process id
-SYNOPSIS
+static int
+invalidate_cache (procinfo *parent, procinfo *pi, void *ptr)
+{
+ /*
+ * About to run the child; invalidate caches and do any other cleanup.
+ */
- static int open_proc_file (int pid, struct procinfo *pip, int mode)
+#if 0
+ if (pi->gregs_dirty)
+ if (parent == NULL ||
+ proc_get_current_thread (parent) != pi->tid)
+ if (!proc_set_gregs (pi)) /* flush gregs cache */
+ proc_warn (pi, "target_resume, set_gregs",
+ __LINE__);
+ if (FP0_REGNUM >= 0)
+ if (pi->fpregs_dirty)
+ if (parent == NULL ||
+ proc_get_current_thread (parent) != pi->tid)
+ if (!proc_set_fpregs (pi)) /* flush fpregs cache */
+ proc_warn (pi, "target_resume, set_fpregs",
+ __LINE__);
+#endif
+
+ if (parent != NULL)
+ {
+ /* The presence of a parent indicates that this is an LWP.
+ Close any file descriptors that it might have open.
+ We don't do this to the master (parent) procinfo. */
-DESCRIPTION
+ close_procinfo_files (pi);
+ }
+ pi->gregs_valid = 0;
+ pi->fpregs_valid = 0;
+#if 0
+ pi->gregs_dirty = 0;
+ pi->fpregs_dirty = 0;
+#endif
+ pi->status_valid = 0;
+ pi->threads_valid = 0;
- Given a process id and a mode, close the existing open /proc
- entry (if any) and open one for the new process id, in the
- specified mode. Once it is open, then mark the local process
- information structure as valid, which guarantees that the pid,
- fd, and pathname fields match an open /proc entry. Returns
- zero if the open fails, nonzero otherwise.
+ return 0;
+}
- Note that the pathname is left intact, even when the open fails,
- so that callers can use it to construct meaningful error messages
- rather than just "file open failed".
+#if 0
+/*
+ * Function: make_signal_thread_runnable
+ *
+ * A callback function for iterate_over_threads.
+ * Find the asynchronous signal thread, and make it runnable.
+ * See if that helps matters any.
*/
static int
-open_proc_file (pid, pip, mode)
- int pid;
- struct procinfo *pip;
- int mode;
+make_signal_thread_runnable (procinfo *process, procinfo *pi, void *ptr)
{
- pip -> valid = 0; /* FIXME, what is this? ?! */
- if (pip -> valid)
- {
- close (pip -> fd);
- }
- if (pip -> pathname == NULL)
- {
- pip -> pathname = xmalloc (32);
- }
- sprintf (pip -> pathname, PROC_NAME_FMT, pid);
- if ((pip -> fd = open (pip -> pathname, mode)) >= 0)
+#ifdef PR_ASLWP
+ if (proc_flags (pi) & PR_ASLWP)
{
- pip -> valid = 1;
- pip -> pid = pid;
+ if (!proc_run_process (pi, 0, -1))
+ proc_error (pi, "make_signal_thread_runnable", __LINE__);
+ return 1;
}
- return (pip -> valid);
-}
-
-static char *
-mappingflags (flags)
- long flags;
-{
- static char asciiflags[8];
-
- strcpy (asciiflags, "-------");
-#if defined (MA_PHYS)
- if (flags & MA_PHYS) asciiflags[0] = 'd';
#endif
- if (flags & MA_STACK) asciiflags[1] = 's';
- if (flags & MA_BREAK) asciiflags[2] = 'b';
- if (flags & MA_SHARED) asciiflags[3] = 's';
- if (flags & MA_READ) asciiflags[4] = 'r';
- if (flags & MA_WRITE) asciiflags[5] = 'w';
- if (flags & MA_EXEC) asciiflags[6] = 'x';
- return (asciiflags);
+ return 0;
}
+#endif
+
+/*
+ * Function: target_resume
+ *
+ * Make the child process runnable. Normally we will then call
+ * procfs_wait and wait for it to stop again (unles gdb is async).
+ *
+ * Arguments:
+ * step: if true, then arrange for the child to stop again
+ * after executing a single instruction.
+ * signo: if zero, then cancel any pending signal.
+ * If non-zero, then arrange for the indicated signal
+ * to be delivered to the child when it runs.
+ * pid: if -1, then allow any child thread to run.
+ * if non-zero, then allow only the indicated thread to run.
+ ******* (not implemented yet)
+ */
static void
-info_proc_flags (pip, summary)
- struct procinfo *pip;
- int summary;
+procfs_resume (ptid_t ptid, int step, enum target_signal signo)
{
- struct trans *transp;
+ procinfo *pi, *thread;
+ int native_signo;
+
+ /* 2.1:
+ prrun.prflags |= PRSVADDR;
+ prrun.pr_vaddr = $PC; set resume address
+ prrun.prflags |= PRSTRACE; trace signals in pr_trace (all)
+ prrun.prflags |= PRSFAULT; trace faults in pr_fault (all but PAGE)
+ prrun.prflags |= PRCFAULT; clear current fault.
+
+ PRSTRACE and PRSFAULT can be done by other means
+ (proc_trace_signals, proc_trace_faults)
+ PRSVADDR is unnecessary.
+ PRCFAULT may be replaced by a PIOCCFAULT call (proc_clear_current_fault)
+ This basically leaves PRSTEP and PRCSIG.
+ PRCSIG is like PIOCSSIG (proc_clear_current_signal).
+ So basically PR_STEP is the sole argument that must be passed
+ to proc_run_process (for use in the prrun struct by ioctl). */
+
+ /* Find procinfo for main process */
+ pi = find_procinfo_or_die (PIDGET (inferior_ptid), 0);
+
+ /* First cut: ignore pid argument */
+ errno = 0;
- printf_filtered ("%-32s", "Process status flags:");
- if (!summary)
- {
- printf_filtered ("\n\n");
- }
- for (transp = pr_flag_table; transp -> name != NULL; transp++)
+ /* Convert signal to host numbering. */
+ if (signo == 0 ||
+ (signo == TARGET_SIGNAL_STOP && pi->ignore_next_sigstop))
+ native_signo = 0;
+ else
+ native_signo = target_signal_to_host (signo);
+
+ pi->ignore_next_sigstop = 0;
+
+ /* Running the process voids all cached registers and status. */
+ /* Void the threads' caches first */
+ proc_iterate_over_threads (pi, invalidate_cache, NULL);
+ /* Void the process procinfo's caches. */
+ invalidate_cache (NULL, pi, NULL);
+
+ if (PIDGET (ptid) != -1)
{
- if (pip -> prstatus.pr_flags & transp -> value)
+ /* Resume a specific thread, presumably suppressing the others. */
+ thread = find_procinfo (PIDGET (ptid), TIDGET (ptid));
+ if (thread != NULL)
{
- if (summary)
- {
- printf_filtered ("%s ", transp -> name);
- }
- else
+ if (thread->tid != 0)
{
- printf_filtered ("\t%-16s %s.\n", transp -> name, transp -> desc);
+ /* We're to resume a specific thread, and not the others.
+ * Set the child process's PR_ASYNC flag.
+ */
+#ifdef PR_ASYNC
+ if (!proc_set_async (pi))
+ proc_error (pi, "target_resume, set_async", __LINE__);
+#endif
+#if 0
+ proc_iterate_over_threads (pi,
+ make_signal_thread_runnable,
+ NULL);
+#endif
+ pi = thread; /* substitute the thread's procinfo for run */
}
}
}
- printf_filtered ("\n");
+
+ if (!proc_run_process (pi, step, native_signo))
+ {
+ if (errno == EBUSY)
+ warning ("resume: target already running. Pretend to resume, and hope for the best!\n");
+ else
+ proc_error (pi, "target_resume", __LINE__);
+ }
+}
+
+/*
+ * Function: register_gdb_signals
+ *
+ * Traverse the list of signals that GDB knows about
+ * (see "handle" command), and arrange for the target
+ * to be stopped or not, according to these settings.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
+
+static int
+register_gdb_signals (procinfo *pi, gdb_sigset_t *signals)
+{
+ int signo;
+
+ for (signo = 0; signo < NSIG; signo ++)
+ if (signal_stop_state (target_signal_from_host (signo)) == 0 &&
+ signal_print_state (target_signal_from_host (signo)) == 0 &&
+ signal_pass_state (target_signal_from_host (signo)) == 1)
+ prdelset (signals, signo);
+ else
+ praddset (signals, signo);
+
+ return proc_set_traced_signals (pi, signals);
}
+/*
+ * Function: target_notice_signals
+ *
+ * Set up to trace signals in the child process.
+ */
+
static void
-info_proc_stop (pip, summary)
- struct procinfo *pip;
- int summary;
+procfs_notice_signals (ptid_t ptid)
{
- struct trans *transp;
- int why;
- int what;
+ gdb_sigset_t signals;
+ procinfo *pi = find_procinfo_or_die (PIDGET (ptid), 0);
- why = pip -> prstatus.pr_why;
- what = pip -> prstatus.pr_what;
+ if (proc_get_traced_signals (pi, &signals) &&
+ register_gdb_signals (pi, &signals))
+ return;
+ else
+ proc_error (pi, "notice_signals", __LINE__);
+}
- if (pip -> prstatus.pr_flags & PR_STOPPED)
- {
- printf_filtered ("%-32s", "Reason for stopping:");
- if (!summary)
- {
- printf_filtered ("\n\n");
- }
- for (transp = pr_why_table; transp -> name != NULL; transp++)
- {
- if (why == transp -> value)
- {
- if (summary)
- {
- printf_filtered ("%s ", transp -> name);
- }
- else
- {
- printf_filtered ("\t%-16s %s.\n",
- transp -> name, transp -> desc);
- }
- break;
- }
- }
-
- /* Use the pr_why field to determine what the pr_what field means, and
- print more information. */
-
- switch (why)
- {
- case PR_REQUESTED:
- /* pr_what is unused for this case */
- break;
- case PR_JOBCONTROL:
- case PR_SIGNALLED:
- if (summary)
- {
- printf_filtered ("%s ", signalname (what));
- }
- else
- {
- printf_filtered ("\t%-16s %s.\n", signalname (what),
- safe_strsignal (what));
- }
- break;
- case PR_SYSENTRY:
- if (summary)
- {
- printf_filtered ("%s ", syscallname (what));
- }
- else
- {
- printf_filtered ("\t%-16s %s.\n", syscallname (what),
- "Entered this system call");
- }
- break;
- case PR_SYSEXIT:
- if (summary)
- {
- printf_filtered ("%s ", syscallname (what));
- }
- else
- {
- printf_filtered ("\t%-16s %s.\n", syscallname (what),
- "Returned from this system call");
- }
- break;
- case PR_FAULTED:
- if (summary)
- {
- printf_filtered ("%s ",
- lookupname (faults_table, what, "fault"));
- }
- else
- {
- printf_filtered ("\t%-16s %s.\n",
- lookupname (faults_table, what, "fault"),
- lookupdesc (faults_table, what));
- }
- break;
- }
- printf_filtered ("\n");
- }
+/*
+ * Function: target_files_info
+ *
+ * Print status information about the child process.
+ */
+
+static void
+procfs_files_info (struct target_ops *ignore)
+{
+ printf_filtered ("\tUsing the running image of %s %s via /proc.\n",
+ attach_flag? "attached": "child",
+ target_pid_to_str (inferior_ptid));
}
+/*
+ * Function: target_open
+ *
+ * A dummy: you don't open procfs.
+ */
+
static void
-info_proc_siginfo (pip, summary)
- struct procinfo *pip;
- int summary;
+procfs_open (char *args, int from_tty)
{
- struct siginfo *sip;
+ error ("Use the \"run\" command to start a Unix child process.");
+}
- if ((pip -> prstatus.pr_flags & PR_STOPPED) &&
- (pip -> prstatus.pr_why == PR_SIGNALLED ||
- pip -> prstatus.pr_why == PR_FAULTED))
- {
- printf_filtered ("%-32s", "Additional signal/fault info:");
- sip = &pip -> prstatus.pr_info;
- if (summary)
- {
- printf_filtered ("%s ", signalname (sip -> si_signo));
- if (sip -> si_errno > 0)
- {
- printf_filtered ("%s ", errnoname (sip -> si_errno));
- }
- if (sip -> si_code <= 0)
- {
- printf_filtered ("sent by pid %d, uid %d ", sip -> si_pid,
- sip -> si_uid);
- }
- else
- {
- printf_filtered ("%s ", sigcodename (sip));
- if ((sip -> si_signo == SIGILL) ||
- (sip -> si_signo == SIGFPE) ||
- (sip -> si_signo == SIGSEGV) ||
- (sip -> si_signo == SIGBUS))
- {
- printf_filtered ("addr=%#x ", sip -> si_addr);
- }
- else if ((sip -> si_signo == SIGCHLD))
- {
- printf_filtered ("child pid %u, status %u ",
- sip -> si_pid,
- sip -> si_status);
- }
- else if ((sip -> si_signo == SIGPOLL))
- {
- printf_filtered ("band %u ", sip -> si_band);
- }
- }
- }
- else
- {
- printf_filtered ("\n\n");
- printf_filtered ("\t%-16s %s.\n", signalname (sip -> si_signo),
- safe_strsignal (sip -> si_signo));
- if (sip -> si_errno > 0)
- {
- printf_filtered ("\t%-16s %s.\n",
- errnoname (sip -> si_errno),
- safe_strerror (sip -> si_errno));
- }
- if (sip -> si_code <= 0)
- {
- printf_filtered ("\t%-16u %s\n", sip -> si_pid,
- "PID of process sending signal");
- printf_filtered ("\t%-16u %s\n", sip -> si_uid,
- "UID of process sending signal");
- }
- else
- {
- printf_filtered ("\t%-16s %s.\n", sigcodename (sip),
- sigcodedesc (sip));
- if ((sip -> si_signo == SIGILL) ||
- (sip -> si_signo == SIGFPE))
- {
- printf_filtered ("\t%-16#x %s.\n", sip -> si_addr,
- "Address of faulting instruction");
- }
- else if ((sip -> si_signo == SIGSEGV) ||
- (sip -> si_signo == SIGBUS))
- {
- printf_filtered ("\t%-16#x %s.\n", sip -> si_addr,
- "Address of faulting memory reference");
- }
- else if ((sip -> si_signo == SIGCHLD))
- {
- printf_filtered ("\t%-16u %s.\n", sip -> si_pid,
- "Child process ID");
- printf_filtered ("\t%-16u %s.\n", sip -> si_status,
- "Child process exit value or signal");
- }
- else if ((sip -> si_signo == SIGPOLL))
- {
- printf_filtered ("\t%-16u %s.\n", sip -> si_band,
- "Band event for POLL_{IN,OUT,MSG}");
- }
- }
- }
- printf_filtered ("\n");
- }
+/*
+ * Function: target_can_run
+ *
+ * This tells GDB that this target vector can be invoked
+ * for "run" or "attach".
+ */
+
+int procfs_suppress_run = 0; /* Non-zero if procfs should pretend not to
+ be a runnable target. Used by targets
+ that can sit atop procfs, such as solaris
+ thread support. */
+
+
+static int
+procfs_can_run (void)
+{
+ /* This variable is controlled by modules that sit atop procfs that
+ may layer their own process structure atop that provided here.
+ sol-thread.c does this because of the Solaris two-level thread
+ model. */
+
+ /* NOTE: possibly obsolete -- use the thread_stratum approach instead. */
+
+ return !procfs_suppress_run;
}
+/*
+ * Function: target_stop
+ *
+ * Stop the child process asynchronously, as when the
+ * gdb user types control-c or presses a "stop" button.
+ *
+ * Works by sending kill(SIGINT) to the child's process group.
+ */
+
static void
-info_proc_syscalls (pip, summary)
- struct procinfo *pip;
- int summary;
+procfs_stop (void)
{
- int syscallnum;
+ extern pid_t inferior_process_group;
- if (!summary)
- {
+ kill (-inferior_process_group, SIGINT);
+}
-#if 0 /* FIXME: Needs to use gdb-wide configured info about system calls. */
- if (pip -> prstatus.pr_flags & PR_ASLEEP)
- {
- int syscallnum = pip -> prstatus.pr_reg[R_D0];
- if (summary)
- {
- printf_filtered ("%-32s", "Sleeping in system call:");
- printf_filtered ("%s", syscallname (syscallnum));
- }
- else
- {
- printf_filtered ("Sleeping in system call '%s'.\n",
- syscallname (syscallnum));
- }
- }
+/*
+ * Function: unconditionally_kill_inferior
+ *
+ * Make it die. Wait for it to die. Clean up after it.
+ * Note: this should only be applied to the real process,
+ * not to an LWP, because of the check for parent-process.
+ * If we need this to work for an LWP, it needs some more logic.
+ */
+
+static void
+unconditionally_kill_inferior (procinfo *pi)
+{
+ int parent_pid;
+
+ parent_pid = proc_parent_pid (pi);
+#ifdef PROCFS_NEED_CLEAR_CURSIG_FOR_KILL
+ /* FIXME: use access functions */
+ /* Alpha OSF/1-3.x procfs needs a clear of the current signal
+ before the PIOCKILL, otherwise it might generate a corrupted core
+ file for the inferior. */
+ if (ioctl (pi->ctl_fd, PIOCSSIG, NULL) < 0)
+ {
+ printf_filtered ("unconditionally_kill: SSIG failed!\n");
+ }
#endif
+#ifdef PROCFS_NEED_PIOCSSIG_FOR_KILL
+ /* Alpha OSF/1-2.x procfs needs a PIOCSSIG call with a SIGKILL signal
+ to kill the inferior, otherwise it might remain stopped with a
+ pending SIGKILL.
+ We do not check the result of the PIOCSSIG, the inferior might have
+ died already. */
+ {
+ gdb_siginfo_t newsiginfo;
+
+ memset ((char *) &newsiginfo, 0, sizeof (newsiginfo));
+ newsiginfo.si_signo = SIGKILL;
+ newsiginfo.si_code = 0;
+ newsiginfo.si_errno = 0;
+ newsiginfo.si_pid = getpid ();
+ newsiginfo.si_uid = getuid ();
+ /* FIXME: use proc_set_current_signal */
+ ioctl (pi->ctl_fd, PIOCSSIG, &newsiginfo);
+ }
+#else /* PROCFS_NEED_PIOCSSIG_FOR_KILL */
+ if (!proc_kill (pi, SIGKILL))
+ proc_error (pi, "unconditionally_kill, proc_kill", __LINE__);
+#endif /* PROCFS_NEED_PIOCSSIG_FOR_KILL */
+ destroy_procinfo (pi);
+
+ /* If pi is GDB's child, wait for it to die. */
+ if (parent_pid == getpid ())
+ /* FIXME: should we use waitpid to make sure we get the right event?
+ Should we check the returned event? */
+ {
+#if 0
+ int status, ret;
- if (ioctl (pip -> fd, PIOCGENTRY, &pip -> entryset) < 0)
- {
- print_sys_errmsg (pip -> pathname, errno);
- error ("PIOCGENTRY failed");
- }
-
- if (ioctl (pip -> fd, PIOCGEXIT, &pip -> exitset) < 0)
- {
- print_sys_errmsg (pip -> pathname, errno);
- error ("PIOCGEXIT failed");
- }
-
- printf_filtered ("System call tracing information:\n\n");
-
- printf_filtered ("\t%-12s %-8s %-8s\n",
- "System call",
- "Entry",
- "Exit");
- for (syscallnum = 0; syscallnum < MAX_SYSCALLS; syscallnum++)
- {
- QUIT;
- if (syscall_table[syscallnum] != NULL)
- {
- printf_filtered ("\t%-12s ", syscall_table[syscallnum]);
- printf_filtered ("%-8s ",
- prismember (&pip -> entryset, syscallnum)
- ? "on" : "off");
- printf_filtered ("%-8s ",
- prismember (&pip -> exitset, syscallnum)
- ? "on" : "off");
- printf_filtered ("\n");
- }
- }
- printf_filtered ("\n");
+ ret = waitpid (pi->pid, &status, 0);
+#else
+ wait (NULL);
+#endif
}
}
-static char *
-signalname (signo)
- int signo;
-{
- char *name;
- static char locbuf[32];
+/*
+ * Function: target_kill_inferior
+ *
+ * We're done debugging it, and we want it to go away.
+ * Then we want GDB to forget all about it.
+ */
- name = strsigno (signo);
- if (name == NULL)
- {
- sprintf (locbuf, "Signal %d", signo);
- }
- else
+static void
+procfs_kill_inferior (void)
+{
+ if (!ptid_equal (inferior_ptid, null_ptid)) /* ? */
{
- sprintf (locbuf, "%s (%d)", name, signo);
+ /* Find procinfo for main process */
+ procinfo *pi = find_procinfo (PIDGET (inferior_ptid), 0);
+
+ if (pi)
+ unconditionally_kill_inferior (pi);
+ target_mourn_inferior ();
}
- return (locbuf);
}
-static char *
-errnoname (errnum)
- int errnum;
+/*
+ * Function: target_mourn_inferior
+ *
+ * Forget we ever debugged this thing!
+ */
+
+static void
+procfs_mourn_inferior (void)
{
- char *name;
- static char locbuf[32];
+ procinfo *pi;
- name = strerrno (errnum);
- if (name == NULL)
+ if (!ptid_equal (inferior_ptid, null_ptid))
{
- sprintf (locbuf, "Errno %d", errnum);
+ /* Find procinfo for main process */
+ pi = find_procinfo (PIDGET (inferior_ptid), 0);
+ if (pi)
+ destroy_procinfo (pi);
}
- else
- {
- sprintf (locbuf, "%s (%d)", name, errnum);
- }
- return (locbuf);
+ unpush_target (&procfs_ops);
+ generic_mourn_inferior ();
}
-static void
-info_proc_signals (pip, summary)
- struct procinfo *pip;
- int summary;
+/*
+ * Function: init_inferior
+ *
+ * When GDB forks to create a runnable inferior process,
+ * this function is called on the parent side of the fork.
+ * It's job is to do whatever is necessary to make the child
+ * ready to be debugged, and then wait for the child to synchronize.
+ */
+
+static void
+procfs_init_inferior (int pid)
{
- int signo;
+ procinfo *pi;
+ gdb_sigset_t signals;
+ int fail;
- if (!summary)
- {
- if (ioctl (pip -> fd, PIOCGTRACE, &pip -> trace) < 0)
- {
- print_sys_errmsg (pip -> pathname, errno);
- error ("PIOCGTRACE failed");
- }
-
- printf_filtered ("Disposition of signals:\n\n");
- printf_filtered ("\t%-15s %-8s %-8s %-8s %s\n\n",
- "Signal", "Trace", "Hold", "Pending", "Description");
- for (signo = 0; signo < NSIG; signo++)
- {
- QUIT;
- printf_filtered ("\t%-15s ", signalname (signo));
- printf_filtered ("%-8s ",
- prismember (&pip -> trace, signo)
- ? "on" : "off");
- printf_filtered ("%-8s ",
- prismember (&pip -> prstatus.pr_sighold, signo)
- ? "on" : "off");
- printf_filtered ("%-8s ",
- prismember (&pip -> prstatus.pr_sigpend, signo)
- ? "yes" : "no");
- printf_filtered (" %s\n", safe_strsignal (signo));
- }
- printf_filtered ("\n");
- }
+ /* This routine called on the parent side (GDB side)
+ after GDB forks the inferior. */
+
+ push_target (&procfs_ops);
+
+ if ((pi = create_procinfo (pid, 0)) == NULL)
+ perror ("procfs: out of memory in 'init_inferior'");
+
+ if (!open_procinfo_files (pi, FD_CTL))
+ proc_error (pi, "init_inferior, open_proc_files", __LINE__);
+
+ /*
+ xmalloc // done
+ open_procinfo_files // done
+ link list // done
+ prfillset (trace)
+ procfs_notice_signals
+ prfillset (fault)
+ prdelset (FLTPAGE)
+ PIOCWSTOP
+ PIOCSFAULT
+ */
+
+ /* If not stopped yet, wait for it to stop. */
+ if (!(proc_flags (pi) & PR_STOPPED) &&
+ !(proc_wait_for_stop (pi)))
+ dead_procinfo (pi, "init_inferior: wait_for_stop failed", KILL);
+
+ /* Save some of the /proc state to be restored if we detach. */
+ /* FIXME: Why? In case another debugger was debugging it?
+ We're it's parent, for Ghu's sake! */
+ if (!proc_get_traced_signals (pi, &pi->saved_sigset))
+ proc_error (pi, "init_inferior, get_traced_signals", __LINE__);
+ if (!proc_get_held_signals (pi, &pi->saved_sighold))
+ proc_error (pi, "init_inferior, get_held_signals", __LINE__);
+ if (!proc_get_traced_faults (pi, &pi->saved_fltset))
+ proc_error (pi, "init_inferior, get_traced_faults", __LINE__);
+ if (!proc_get_traced_sysentry (pi, pi->saved_entryset))
+ proc_error (pi, "init_inferior, get_traced_sysentry", __LINE__);
+ if (!proc_get_traced_sysexit (pi, pi->saved_exitset))
+ proc_error (pi, "init_inferior, get_traced_sysexit", __LINE__);
+
+ /* Register to trace selected signals in the child. */
+ prfillset (&signals);
+ if (!register_gdb_signals (pi, &signals))
+ proc_error (pi, "init_inferior, register_signals", __LINE__);
+
+ if ((fail = procfs_debug_inferior (pi)) != 0)
+ proc_error (pi, "init_inferior (procfs_debug_inferior)", fail);
+
+ /* FIXME: logically, we should really be turning OFF run-on-last-close,
+ and possibly even turning ON kill-on-last-close at this point. But
+ I can't make that change without careful testing which I don't have
+ time to do right now... */
+ /* Turn on run-on-last-close flag so that the child
+ will die if GDB goes away for some reason. */
+ if (!proc_set_run_on_last_close (pi))
+ proc_error (pi, "init_inferior, set_RLC", __LINE__);
+
+ /* The 'process ID' we return to GDB is composed of
+ the actual process ID plus the lwp ID. */
+ inferior_ptid = MERGEPID (pi->pid, proc_get_current_thread (pi));
+
+#ifdef START_INFERIOR_TRAPS_EXPECTED
+ startup_inferior (START_INFERIOR_TRAPS_EXPECTED);
+#else
+ /* One trap to exec the shell, one to exec the program being debugged. */
+ startup_inferior (2);
+#endif /* START_INFERIOR_TRAPS_EXPECTED */
}
+/*
+ * Function: set_exec_trap
+ *
+ * When GDB forks to create a new process, this function is called
+ * on the child side of the fork before GDB exec's the user program.
+ * Its job is to make the child minimally debuggable, so that the
+ * parent GDB process can connect to the child and take over.
+ * This function should do only the minimum to make that possible,
+ * and to synchronize with the parent process. The parent process
+ * should take care of the details.
+ */
+
static void
-info_proc_faults (pip, summary)
- struct procinfo *pip;
- int summary;
+procfs_set_exec_trap (void)
{
- struct trans *transp;
+ /* This routine called on the child side (inferior side)
+ after GDB forks the inferior. It must use only local variables,
+ because it may be sharing data space with its parent. */
+
+ procinfo *pi;
+ sysset_t *exitset;
- if (!summary)
+ if ((pi = create_procinfo (getpid (), 0)) == NULL)
+ perror_with_name ("procfs: create_procinfo failed in child.");
+
+ if (open_procinfo_files (pi, FD_CTL) == 0)
{
- if (ioctl (pip -> fd, PIOCGFAULT, &pip -> fltset) < 0)
- {
- print_sys_errmsg (pip -> pathname, errno);
- error ("PIOCGFAULT failed");
- }
-
- printf_filtered ("Current traced hardware fault set:\n\n");
- printf_filtered ("\t%-12s %-8s\n", "Fault", "Trace");
+ proc_warn (pi, "set_exec_trap, open_proc_files", __LINE__);
+ gdb_flush (gdb_stderr);
+ /* no need to call "dead_procinfo", because we're going to exit. */
+ _exit (127);
+ }
- for (transp = faults_table; transp -> name != NULL; transp++)
- {
- QUIT;
- printf_filtered ("\t%-12s ", transp -> name);
- printf_filtered ("%-8s", prismember (&pip -> fltset, transp -> value)
- ? "on" : "off");
- printf_filtered ("\n");
- }
- printf_filtered ("\n");
+#ifdef PRFS_STOPEXEC /* defined on OSF */
+ /* OSF method for tracing exec syscalls. Quoting:
+ Under Alpha OSF/1 we have to use a PIOCSSPCACT ioctl to trace
+ exits from exec system calls because of the user level loader. */
+ /* FIXME: make nice and maybe move into an access function. */
+ {
+ int prfs_flags;
+
+ if (ioctl (pi->ctl_fd, PIOCGSPCACT, &prfs_flags) < 0)
+ {
+ proc_warn (pi, "set_exec_trap (PIOCGSPCACT)", __LINE__);
+ gdb_flush (gdb_stderr);
+ _exit (127);
+ }
+ prfs_flags |= PRFS_STOPEXEC;
+
+ if (ioctl (pi->ctl_fd, PIOCSSPCACT, &prfs_flags) < 0)
+ {
+ proc_warn (pi, "set_exec_trap (PIOCSSPCACT)", __LINE__);
+ gdb_flush (gdb_stderr);
+ _exit (127);
+ }
+ }
+#else /* not PRFS_STOPEXEC */
+ /* Everyone else's (except OSF) method for tracing exec syscalls */
+ /* GW: Rationale...
+ Not all systems with /proc have all the exec* syscalls with the same
+ names. On the SGI, for example, there is no SYS_exec, but there
+ *is* a SYS_execv. So, we try to account for that. */
+
+ exitset = sysset_t_alloc (pi);
+ gdb_premptysysset (exitset);
+#ifdef SYS_exec
+ gdb_praddsysset (exitset, SYS_exec);
+#endif
+#ifdef SYS_execve
+ gdb_praddsysset (exitset, SYS_execve);
+#endif
+#ifdef SYS_execv
+ gdb_praddsysset (exitset, SYS_execv);
+#endif
+#ifdef DYNAMIC_SYSCALLS
+ {
+ int callnum = find_syscall (pi, "execve");
+
+ if (callnum >= 0)
+ gdb_praddsysset (exitset, callnum);
+
+ callnum = find_syscall (pi, "ra_execve");
+ if (callnum >= 0)
+ gdb_praddsysset (exitset, callnum);
+ }
+#endif /* DYNAMIC_SYSCALLS */
+
+ if (!proc_set_traced_sysexit (pi, exitset))
+ {
+ proc_warn (pi, "set_exec_trap, set_traced_sysexit", __LINE__);
+ gdb_flush (gdb_stderr);
+ _exit (127);
}
+#endif /* PRFS_STOPEXEC */
+
+ /* FIXME: should this be done in the parent instead? */
+ /* Turn off inherit on fork flag so that all grand-children
+ of gdb start with tracing flags cleared. */
+ if (!proc_unset_inherit_on_fork (pi))
+ proc_warn (pi, "set_exec_trap, unset_inherit", __LINE__);
+
+ /* Turn off run on last close flag, so that the child process
+ cannot run away just because we close our handle on it.
+ We want it to wait for the parent to attach. */
+ if (!proc_unset_run_on_last_close (pi))
+ proc_warn (pi, "set_exec_trap, unset_RLC", __LINE__);
+
+ /* FIXME: No need to destroy the procinfo --
+ we have our own address space, and we're about to do an exec! */
+ /*destroy_procinfo (pi);*/
}
+/*
+ * Function: create_inferior
+ *
+ * This function is called BEFORE gdb forks the inferior process.
+ * Its only real responsibility is to set things up for the fork,
+ * and tell GDB which two functions to call after the fork (one
+ * for the parent, and one for the child).
+ *
+ * This function does a complicated search for a unix shell program,
+ * which it then uses to parse arguments and environment variables
+ * to be sent to the child. I wonder whether this code could not
+ * be abstracted out and shared with other unix targets such as
+ * infptrace?
+ */
+
static void
-info_proc_mappings (pip, summary)
- struct procinfo *pip;
- int summary;
-{
- int nmap;
- struct prmap *prmaps;
- struct prmap *prmap;
-
- if (!summary)
- {
- printf_filtered ("Mapped address spaces:\n\n");
- printf_filtered ("\t%10s %10s %10s %10s %7s\n",
- "Start Addr",
- " End Addr",
- " Size",
- " Offset",
- "Flags");
- if (ioctl (pip -> fd, PIOCNMAP, &nmap) == 0)
+procfs_create_inferior (char *exec_file, char *allargs, char **env)
+{
+ char *shell_file = getenv ("SHELL");
+ char *tryname;
+ if (shell_file != NULL && strchr (shell_file, '/') == NULL)
+ {
+
+ /* We will be looking down the PATH to find shell_file. If we
+ just do this the normal way (via execlp, which operates by
+ attempting an exec for each element of the PATH until it
+ finds one which succeeds), then there will be an exec for
+ each failed attempt, each of which will cause a PR_SYSEXIT
+ stop, and we won't know how to distinguish the PR_SYSEXIT's
+ for these failed execs with the ones for successful execs
+ (whether the exec has succeeded is stored at that time in the
+ carry bit or some such architecture-specific and
+ non-ABI-specified place).
+
+ So I can't think of anything better than to search the PATH
+ now. This has several disadvantages: (1) There is a race
+ condition; if we find a file now and it is deleted before we
+ exec it, we lose, even if the deletion leaves a valid file
+ further down in the PATH, (2) there is no way to know exactly
+ what an executable (in the sense of "capable of being
+ exec'd") file is. Using access() loses because it may lose
+ if the caller is the superuser; failing to use it loses if
+ there are ACLs or some such. */
+
+ char *p;
+ char *p1;
+ /* FIXME-maybe: might want "set path" command so user can change what
+ path is used from within GDB. */
+ char *path = getenv ("PATH");
+ int len;
+ struct stat statbuf;
+
+ if (path == NULL)
+ path = "/bin:/usr/bin";
+
+ tryname = alloca (strlen (path) + strlen (shell_file) + 2);
+ for (p = path; p != NULL; p = p1 ? p1 + 1: NULL)
{
- prmaps = (struct prmap *) alloca ((nmap + 1) * sizeof (*prmaps));
- if (ioctl (pip -> fd, PIOCMAP, prmaps) == 0)
- {
- for (prmap = prmaps; prmap -> pr_size; ++prmap)
- {
- printf_filtered ("\t%#10x %#10x %#10x %#10x %7s\n",
- prmap -> pr_vaddr,
- prmap -> pr_vaddr + prmap -> pr_size - 1,
- prmap -> pr_size,
- prmap -> pr_off,
- mappingflags (prmap -> pr_mflags));
- }
- }
+ p1 = strchr (p, ':');
+ if (p1 != NULL)
+ len = p1 - p;
+ else
+ len = strlen (p);
+ strncpy (tryname, p, len);
+ tryname[len] = '\0';
+ strcat (tryname, "/");
+ strcat (tryname, shell_file);
+ if (access (tryname, X_OK) < 0)
+ continue;
+ if (stat (tryname, &statbuf) < 0)
+ continue;
+ if (!S_ISREG (statbuf.st_mode))
+ /* We certainly need to reject directories. I'm not quite
+ as sure about FIFOs, sockets, etc., but I kind of doubt
+ that people want to exec() these things. */
+ continue;
+ break;
}
- printf_filtered ("\n");
+ if (p == NULL)
+ /* Not found. This must be an error rather than merely passing
+ the file to execlp(), because execlp() would try all the
+ exec()s, causing GDB to get confused. */
+ error ("procfs:%d -- Can't find shell %s in PATH",
+ __LINE__, shell_file);
+
+ shell_file = tryname;
}
+
+ fork_inferior (exec_file, allargs, env, procfs_set_exec_trap,
+ procfs_init_inferior, NULL, shell_file);
+
+ /* We are at the first instruction we care about. */
+ /* Pedal to the metal... */
+
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0);
}
/*
+ * Function: notice_thread
+ *
+ * Callback for find_new_threads.
+ * Calls "add_thread".
+ */
-LOCAL FUNCTION
+static int
+procfs_notice_thread (procinfo *pi, procinfo *thread, void *ptr)
+{
+ ptid_t gdb_threadid = MERGEPID (pi->pid, thread->tid);
- info_proc -- implement the "info proc" command
+ if (!in_thread_list (gdb_threadid))
+ add_thread (gdb_threadid);
-SYNOPSIS
+ return 0;
+}
- void info_proc (char *args, int from_tty)
+/*
+ * Function: target_find_new_threads
+ *
+ * Query all the threads that the target knows about,
+ * and give them back to GDB to add to its list.
+ */
-DESCRIPTION
+void
+procfs_find_new_threads (void)
+{
+ procinfo *pi;
- Implement gdb's "info proc" command by using the /proc interface
- to print status information about any currently running process.
+ /* Find procinfo for main process */
+ pi = find_procinfo_or_die (PIDGET (inferior_ptid), 0);
+ proc_update_threads (pi);
+ proc_iterate_over_threads (pi, procfs_notice_thread, NULL);
+}
- Examples of the use of "info proc" are:
+/*
+ * Function: target_thread_alive
+ *
+ * Return true if the thread is still 'alive'.
+ *
+ * This guy doesn't really seem to be doing his job.
+ * Got to investigate how to tell when a thread is really gone.
+ */
- info proc (prints summary info for current inferior)
- info proc 123 (prints summary info for process with pid 123)
- info proc mappings (prints address mappings)
- info proc times (prints process/children times)
- info proc id (prints pid, ppid, gid, sid, etc)
- FIXME: i proc id not implemented.
- info proc status (prints general process state info)
- FIXME: i proc status not implemented.
- info proc signals (prints info about signal handling)
- info proc all (prints all info)
+static int
+procfs_thread_alive (ptid_t ptid)
+{
+ int proc, thread;
+ procinfo *pi;
+
+ proc = PIDGET (ptid);
+ thread = TIDGET (ptid);
+ /* If I don't know it, it ain't alive! */
+ if ((pi = find_procinfo (proc, thread)) == NULL)
+ return 0;
+
+ /* If I can't get its status, it ain't alive!
+ What's more, I need to forget about it! */
+ if (!proc_get_status (pi))
+ {
+ destroy_procinfo (pi);
+ return 0;
+ }
+ /* I couldn't have got its status if it weren't alive, so it's alive. */
+ return 1;
+}
+/*
+ * Function: target_pid_to_str
+ *
+ * Return a string to be used to identify the thread in
+ * the "info threads" display.
*/
-static void
-info_proc (args, from_tty)
- char *args;
- int from_tty;
+char *
+procfs_pid_to_str (ptid_t ptid)
{
- int pid;
- struct procinfo pii;
- struct procinfo *pip;
- struct cleanup *old_chain;
- char **argv;
- int argsize;
- int summary = 1;
- int flags = 0;
- int syscalls = 0;
- int signals = 0;
- int faults = 0;
- int mappings = 0;
- int times = 0;
- int id = 0;
- int status = 0;
- int all = 0;
+ static char buf[80];
+ int proc, thread;
+ procinfo *pi;
- old_chain = make_cleanup (null_cleanup, 0);
+ proc = PIDGET (ptid);
+ thread = TIDGET (ptid);
+ pi = find_procinfo (proc, thread);
- /* Default to using the current inferior if no pid specified */
+ if (thread == 0)
+ sprintf (buf, "Process %d", proc);
+ else
+ sprintf (buf, "LWP %d", thread);
+ return &buf[0];
+}
- pip = π
+/*
+ * Function: procfs_set_watchpoint
+ * Insert a watchpoint
+ */
- if (args != NULL)
- {
- if ((argv = buildargv (args)) == NULL)
- {
- nomem (0);
- }
- make_cleanup (freeargv, (char *) argv);
+int
+procfs_set_watchpoint (ptid_t ptid, CORE_ADDR addr, int len, int rwflag,
+ int after)
+{
+#ifndef UNIXWARE
+#ifndef AIX5
+ int pflags = 0;
+ procinfo *pi;
- while (*argv != NULL)
- {
- argsize = strlen (*argv);
- if (argsize >= 1 && strncmp (*argv, "all", argsize) == 0)
- {
- summary = 0;
- all = 1;
- }
- else if (argsize >= 2 && strncmp (*argv, "faults", argsize) == 0)
- {
- summary = 0;
- faults = 1;
- }
- else if (argsize >= 2 && strncmp (*argv, "flags", argsize) == 0)
- {
- summary = 0;
- flags = 1;
- }
- else if (argsize >= 1 && strncmp (*argv, "id", argsize) == 0)
- {
- summary = 0;
- id = 1;
- }
- else if (argsize >= 1 && strncmp (*argv, "mappings", argsize) == 0)
- {
- summary = 0;
- mappings = 1;
- }
- else if (argsize >= 2 && strncmp (*argv, "signals", argsize) == 0)
- {
- summary = 0;
- signals = 1;
- }
- else if (argsize >= 2 && strncmp (*argv, "status", argsize) == 0)
- {
- summary = 0;
- status = 1;
- }
- else if (argsize >= 2 && strncmp (*argv, "syscalls", argsize) == 0)
- {
- summary = 0;
- syscalls = 1;
- }
- else if (argsize >= 1 && strncmp (*argv, "times", argsize) == 0)
- {
- summary = 0;
- times = 1;
- }
- else if ((pii.pid = atoi (*argv)) > 0)
- {
- pid = pii.pid;
- pip = &pii;
- memset (&pii, 0, sizeof (pii));
- if (!open_proc_file (pid, pip, O_RDONLY))
- {
- perror_with_name (pip -> pathname);
- /* NOTREACHED */
- }
- make_cleanup (close_proc_file, pip);
- }
- else if (**argv != '\000')
- {
- error ("Unrecognized or ambiguous keyword `%s'.", *argv);
- }
- argv++;
- }
- }
+ pi = find_procinfo_or_die (PIDGET (ptid) == -1 ?
+ PIDGET (inferior_ptid) : PIDGET (ptid), 0);
- /* If we don't have a valid open process at this point, then we have no
- inferior or didn't specify a specific pid. */
+ /* Translate from GDB's flags to /proc's */
+ if (len > 0) /* len == 0 means delete watchpoint */
+ {
+ switch (rwflag) { /* FIXME: need an enum! */
+ case hw_write: /* default watchpoint (write) */
+ pflags = WRITE_WATCHFLAG;
+ break;
+ case hw_read: /* read watchpoint */
+ pflags = READ_WATCHFLAG;
+ break;
+ case hw_access: /* access watchpoint */
+ pflags = READ_WATCHFLAG | WRITE_WATCHFLAG;
+ break;
+ case hw_execute: /* execution HW breakpoint */
+ pflags = EXEC_WATCHFLAG;
+ break;
+ default: /* Something weird. Return error. */
+ return -1;
+ }
+ if (after) /* Stop after r/w access is completed. */
+ pflags |= AFTER_WATCHFLAG;
+ }
- if (!pip -> valid)
+ if (!proc_set_watchpoint (pi, addr, len, pflags))
{
- error ("\
-No process. Start debugging a program or specify an explicit process ID.");
+ if (errno == E2BIG) /* Typical error for no resources */
+ return -1; /* fail */
+ /* GDB may try to remove the same watchpoint twice.
+ If a remove request returns no match, don't error. */
+ if (errno == ESRCH && len == 0)
+ return 0; /* ignore */
+ proc_error (pi, "set_watchpoint", __LINE__);
}
- if (ioctl (pip -> fd, PIOCSTATUS, &(pip -> prstatus)) < 0)
+#endif /* AIX5 */
+#endif /* UNIXWARE */
+ return 0;
+}
+
+/*
+ * Function: stopped_by_watchpoint
+ *
+ * Returns non-zero if process is stopped on a hardware watchpoint fault,
+ * else returns zero.
+ */
+
+int
+procfs_stopped_by_watchpoint (ptid_t ptid)
+{
+ procinfo *pi;
+
+ pi = find_procinfo_or_die (PIDGET (ptid) == -1 ?
+ PIDGET (inferior_ptid) : PIDGET (ptid), 0);
+
+ if (!pi) /* If no process, then not stopped by watchpoint! */
+ return 0;
+
+ if (proc_flags (pi) & (PR_STOPPED | PR_ISTOP))
{
- print_sys_errmsg (pip -> pathname, errno);
- error ("PIOCSTATUS failed");
+ if (proc_why (pi) == PR_FAULTED)
+ {
+#ifdef FLTWATCH
+ if (proc_what (pi) == FLTWATCH)
+ return 1;
+#endif
+#ifdef FLTKWATCH
+ if (proc_what (pi) == FLTKWATCH)
+ return 1;
+#endif
+ }
}
+ return 0;
+}
+
+#ifdef TM_I386SOL2_H
+/*
+ * Function: procfs_find_LDT_entry
+ *
+ * Input:
+ * ptid_t ptid; // The GDB-style pid-plus-LWP.
+ *
+ * Return:
+ * pointer to the corresponding LDT entry.
+ */
- /* Print verbose information of the requested type(s), or just a summary
- of the information for all types. */
+struct ssd *
+procfs_find_LDT_entry (ptid_t ptid)
+{
+ gdb_gregset_t *gregs;
+ int key;
+ procinfo *pi;
- printf_filtered ("\nInformation for %s:\n\n", pip -> pathname);
- if (summary || all || flags)
+ /* Find procinfo for the lwp. */
+ if ((pi = find_procinfo (PIDGET (ptid), TIDGET (ptid))) == NULL)
{
- info_proc_flags (pip, summary);
+ warning ("procfs_find_LDT_entry: could not find procinfo for %d:%d.",
+ PIDGET (ptid), TIDGET (ptid));
+ return NULL;
}
- if (summary || all)
+ /* get its general registers. */
+ if ((gregs = proc_get_gregs (pi)) == NULL)
{
- info_proc_stop (pip, summary);
+ warning ("procfs_find_LDT_entry: could not read gregs for %d:%d.",
+ PIDGET (ptid), TIDGET (ptid));
+ return NULL;
}
- if (summary || all || signals || faults)
+ /* Now extract the GS register's lower 16 bits. */
+ key = (*gregs)[GS] & 0xffff;
+
+ /* Find the matching entry and return it. */
+ return proc_get_LDT_entry (pi, key);
+}
+#endif /* TM_I386SOL2_H */
+
+
+
+static void
+info_proc_cmd (char *args, int from_tty)
+{
+ struct cleanup *old_chain;
+ procinfo *process = NULL;
+ procinfo *thread = NULL;
+ char **argv = NULL;
+ char *tmp = NULL;
+ int pid = 0;
+ int tid = 0;
+
+ old_chain = make_cleanup (null_cleanup, 0);
+ if (args)
{
- info_proc_siginfo (pip, summary);
+ if ((argv = buildargv (args)) == NULL)
+ nomem (0);
+ else
+ make_cleanup_freeargv (argv);
}
- if (summary || all || syscalls)
+ while (argv != NULL && *argv != NULL)
{
- info_proc_syscalls (pip, summary);
+ if (isdigit (argv[0][0]))
+ {
+ pid = strtoul (argv[0], &tmp, 10);
+ if (*tmp == '/')
+ tid = strtoul (++tmp, NULL, 10);
+ }
+ else if (argv[0][0] == '/')
+ {
+ tid = strtoul (argv[0] + 1, NULL, 10);
+ }
+ else
+ {
+ /* [...] */
+ }
+ argv++;
}
- if (summary || all || mappings)
+ if (pid == 0)
+ pid = PIDGET (inferior_ptid);
+ if (pid == 0)
+ error ("No current process: you must name one.");
+ else
{
- info_proc_mappings (pip, summary);
+ /* Have pid, will travel.
+ First see if it's a process we're already debugging. */
+ process = find_procinfo (pid, 0);
+ if (process == NULL)
+ {
+ /* No. So open a procinfo for it, but
+ remember to close it again when finished. */
+ process = create_procinfo (pid, 0);
+ make_cleanup (do_destroy_procinfo_cleanup, process);
+ if (!open_procinfo_files (process, FD_CTL))
+ proc_error (process, "info proc, open_procinfo_files", __LINE__);
+ }
}
- if (summary || all || signals)
+ if (tid != 0)
+ thread = create_procinfo (pid, tid);
+
+ if (process)
{
- info_proc_signals (pip, summary);
+ printf_filtered ("process %d flags:\n", process->pid);
+ proc_prettyprint_flags (proc_flags (process), 1);
+ if (proc_flags (process) & (PR_STOPPED | PR_ISTOP))
+ proc_prettyprint_why (proc_why (process), proc_what (process), 1);
+ if (proc_get_nthreads (process) > 1)
+ printf_filtered ("Process has %d threads.\n",
+ proc_get_nthreads (process));
}
- if (summary || all || faults)
+ if (thread)
{
- info_proc_faults (pip, summary);
+ printf_filtered ("thread %d flags:\n", thread->tid);
+ proc_prettyprint_flags (proc_flags (thread), 1);
+ if (proc_flags (thread) & (PR_STOPPED | PR_ISTOP))
+ proc_prettyprint_why (proc_why (thread), proc_what (thread), 1);
}
- printf_filtered ("\n");
-
- /* All done, deal with closing any temporary process info structure,
- freeing temporary memory , etc. */
do_cleanups (old_chain);
}
-/* Fork an inferior process, and start debugging it with /proc. */
-
static void
-procfs_create_inferior (exec_file, allargs, env)
- char *exec_file;
- char *allargs;
- char **env;
+proc_trace_syscalls (char *args, int from_tty, int entry_or_exit, int mode)
{
- fork_inferior (exec_file, allargs, env,
- proc_set_exec_trap, procfs_init_inferior);
- /* We are at the first instruction we care about. */
- /* Pedal to the metal... */
- proceed ((CORE_ADDR) -1, 0, 0);
+ procinfo *pi;
+ sysset_t *sysset;
+ int syscallnum = 0;
+
+ if (PIDGET (inferior_ptid) <= 0)
+ error ("you must be debugging a process to use this command.");
+
+ if (args == NULL || args[0] == 0)
+ error_no_arg ("system call to trace");
+
+ pi = find_procinfo_or_die (PIDGET (inferior_ptid), 0);
+ if (isdigit (args[0]))
+ {
+ syscallnum = atoi (args);
+ if (entry_or_exit == PR_SYSENTRY)
+ sysset = proc_get_traced_sysentry (pi, NULL);
+ else
+ sysset = proc_get_traced_sysexit (pi, NULL);
+
+ if (sysset == NULL)
+ proc_error (pi, "proc-trace, get_traced_sysset", __LINE__);
+
+ if (mode == FLAG_SET)
+ gdb_praddsysset (sysset, syscallnum);
+ else
+ gdb_prdelsysset (sysset, syscallnum);
+
+ if (entry_or_exit == PR_SYSENTRY)
+ {
+ if (!proc_set_traced_sysentry (pi, sysset))
+ proc_error (pi, "proc-trace, set_traced_sysentry", __LINE__);
+ }
+ else
+ {
+ if (!proc_set_traced_sysexit (pi, sysset))
+ proc_error (pi, "proc-trace, set_traced_sysexit", __LINE__);
+ }
+ }
}
-/* Clean up after the inferior dies. */
+static void
+proc_trace_sysentry_cmd (char *args, int from_tty)
+{
+ proc_trace_syscalls (args, from_tty, PR_SYSENTRY, FLAG_SET);
+}
-static void
-procfs_mourn_inferior ()
+static void
+proc_trace_sysexit_cmd (char *args, int from_tty)
{
- unpush_target (&procfs_ops);
- generic_mourn_inferior ();
+ proc_trace_syscalls (args, from_tty, PR_SYSEXIT, FLAG_SET);
}
-/* Mark our target-struct as eligible for stray "run" and "attach" commands. */
-static int
-procfs_can_run ()
-{
- return(1);
-}
-\f
-struct target_ops procfs_ops = {
- "procfs", /* to_shortname */
- "Unix /proc child process", /* to_longname */
- "Unix /proc child process (started by the \"run\" command).", /* to_doc */
- procfs_open, /* to_open */
- 0, /* to_close */
- procfs_attach, /* to_attach */
- procfs_detach, /* to_detach */
- procfs_resume, /* to_resume */
- procfs_wait, /* to_wait */
- procfs_fetch_registers, /* to_fetch_registers */
- procfs_store_registers, /* to_store_registers */
- procfs_prepare_to_store, /* to_prepare_to_store */
- procfs_xfer_memory, /* to_xfer_memory */
- procfs_files_info, /* to_files_info */
- memory_insert_breakpoint, /* to_insert_breakpoint */
- memory_remove_breakpoint, /* to_remove_breakpoint */
- terminal_init_inferior, /* to_terminal_init */
- terminal_inferior, /* to_terminal_inferior */
- terminal_ours_for_output, /* to_terminal_ours_for_output */
- terminal_ours, /* to_terminal_ours */
- child_terminal_info, /* to_terminal_info */
- procfs_kill_inferior, /* to_kill */
- 0, /* to_load */
- 0, /* to_lookup_symbol */
- procfs_create_inferior, /* to_create_inferior */
- procfs_mourn_inferior, /* to_mourn_inferior */
- procfs_can_run, /* to_can_run */
- procfs_notice_signals, /* to_notice_signals */
- process_stratum, /* to_stratum */
- 0, /* to_next */
- 1, /* to_has_all_memory */
- 1, /* to_has_memory */
- 1, /* to_has_stack */
- 1, /* to_has_registers */
- 1, /* to_has_execution */
- 0, /* sections */
- 0, /* sections_end */
- OPS_MAGIC /* to_magic */
-};
-
-/*
-
-GLOBAL FUNCTION
-
- _initialize_procfs -- initialize the process file system stuff
-
-SYNOPSIS
-
- void _initialize_procfs (void)
-
-DESCRIPTION
-
- Do required initializations during gdb startup for using the
- /proc file system interface.
+static void
+proc_untrace_sysentry_cmd (char *args, int from_tty)
+{
+ proc_trace_syscalls (args, from_tty, PR_SYSENTRY, FLAG_RESET);
+}
+
+static void
+proc_untrace_sysexit_cmd (char *args, int from_tty)
+{
+ proc_trace_syscalls (args, from_tty, PR_SYSEXIT, FLAG_RESET);
+}
-*/
void
-_initialize_procfs ()
+_initialize_procfs (void)
{
+ init_procfs_ops ();
add_target (&procfs_ops);
+ add_info ("proc", info_proc_cmd,
+ "Show /proc process information about any running process.\
+Default is the process being debugged.");
+ add_com ("proc-trace-entry", no_class, proc_trace_sysentry_cmd,
+ "Give a trace of entries into the syscall.");
+ add_com ("proc-trace-exit", no_class, proc_trace_sysexit_cmd,
+ "Give a trace of exits from the syscall.");
+ add_com ("proc-untrace-entry", no_class, proc_untrace_sysentry_cmd,
+ "Cancel a trace of entries into the syscall.");
+ add_com ("proc-untrace-exit", no_class, proc_untrace_sysexit_cmd,
+ "Cancel a trace of exits from the syscall.");
+}
+
+/* =================== END, GDB "MODULE" =================== */
+
+
- add_info ("proc", info_proc,
-"Show process status information using /proc entry.\n\
-Specify process id or use current inferior by default.\n\
-Specify keywords for detailed information; default is summary.\n\
-Keywords are: `all', `faults', `flags', `id', `mappings', `signals',\n\
-`status', `syscalls', and `times'.\n\
-Unambiguous abbreviations may be used.");
+/* miscelaneous stubs: */
+/* The following satisfy a few random symbols mostly created by */
+/* the solaris threads implementation, which I will chase down */
+/* later. */
- init_syscall_table ();
+/*
+ * Return a pid for which we guarantee
+ * we will be able to find a 'live' procinfo.
+ */
+
+ptid_t
+procfs_first_available (void)
+{
+ return pid_to_ptid (procinfo_list ? procinfo_list->pid : -1);
}
projects / binutils.git / blobdiff