prms send-pr gprof gdbtest tgas etc expect dejagnu sim
m4 autoconf ispell grep diff rcs cvs fileutils shellutils
textutils wdiff find emacs uudecode hello tar gzip indent
- recode release sed utils"
+ recode release sed utils newlib"
# these libraries are built for the target environment, and are built after
srctrigger=move-if-change
srcname="gnu development package"
+# This gets set non-empty for some net releases of packages.
+appdirs=""
+
# per-host:
# Work in distributions that contain no compiler tools, like Autoconf.
mips*-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
mips*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
mips*-*-sysv*) host_makefile_frag=config/mh-riscos ;;
+ i[34]86-ncr-sysv43) host_makefile_frag=config/mh-ncrsvr43 ;;
i[34]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
i[34]86-*-sco*) host_makefile_frag=config/mh-sco ;;
i[34]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
i[34]86-*-linux*) host_makefile_frag=config/mh-linux ;;
i[34]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
i[34]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
+ i[34]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
*-ibm-aix*) host_makefile_frag=config/mh-aix ;;
*-bull-bosx*) host_makefile_frag=config/mh-aix ;;
*-sun-*) host_makefile_frag=config/mh-sun ;;
*-hp-hpux*) host_makefile_frag=config/mh-hpux ;;
*-*-hiux*) host_makefile_frag=config/mh-hpux ;;
- rs6000-*-lynxos*) host_makefile_frag=config/mh-lynxosrs6k ;;
+ rs6000-*-lynxos*) host_makefile_frag=config/mh-lynxrs6k ;;
*-*-lynxos*) host_makefile_frag=config/mh-lynxos ;;
*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
*-*-sysv*) host_makefile_frag=config/mh-sysv ;;
# per-target:
+case "${target}" in
+ v810*) target_makefile_frag=config/mt-v810 ;;
+esac
+
gasdir=gas
use_gnu_ld=
use_gnu_as=
# toolchains, we add some directories that should only be useful in a
# cross-compiler.
+is_cross_compiler=
+
if [ x"${host}" = x"${target}" ] ; then
# when doing a native toolchain, don't build the targets
# that are in the 'cross only' list
for i in ${cross_only} ; do
configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"`
done
+ is_cross_compiler=no
else
# similarly, don't build the targets in the 'native only'
# list when building a cross compiler
for i in ${native_only} ; do
configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"`
done
+ is_cross_compiler=yes
fi
+# Configure extra directories which are host specific
+
+case "${host}" in
+ i[34]86-*-go32*)
+ configdirs="$configdirs dosrel" ;;
+esac
+
# Remove more programs from consideration, based on the host or
# target this usually means that a port of the program doesn't
# exist yet.
;;
esac
+
+
+
+
case "${target}" in
alpha-dec-osf1*)
noconfigdirs="$noconfigdirs emacs fileutils grep newlib"
;;
i[34]86-*-go32)
# add the go32 support tools to the list
+ # but don't build gdb
configdirs=`echo go32 ${configdirs}`
+ noconfigdirs="$noconfigdirs gdb libg++ libio"
+ ;;
+ i[34]86-*-sco*)
+ noconfigdirs="$noconfigdirs gprof"
;;
i[34]86-*-solaris2*)
# The linker does static linking correctly, but the Solaris C library
esac
# but that's okay since emacs doesn't work anyway
noconfigdirs="$noconfigdirs emacs"
-
- # static versions of several key libraries are not available,
- # so building our entire toolchain is impossible until
- # the GNU linker supports shared libraries
- noconfigdirs="$noconfigdirs ld"
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs ld binutils gprof textutils cvs"
;;
- rs6000-*-*)
+ rs6000-*-lynxos*)
# a gcc built textutils will cause the linker to hang on 'join'
# The CVS server code doesn't work on the RS/6000
- noconfigdirs="$noconfigdirs ld binutils gprof textutils cvs"
+ # Newlib makes problems for libg++ in crosses.
+ noconfigdirs="$noconfigdirs gas ld newlib gprof textutils cvs"
+ use_gnu_ld=no
+ use_gnu_as=no
+ ;;
+ rs6000-*-*)
+ # a gcc built textutils will cause the linker to hang on 'join'
+ noconfigdirs="$noconfigdirs ld binutils gprof textutils"
;;
m68k-apollo-*)
noconfigdirs="$noconfigdirs ld binutils gprof"
# The GNU linker does not support shared libraries.
noconfigdirs="$noconfigdirs ld gprof"
;;
+ mips*-dec-bsd*)
+ noconfigdirs="$noconfigdirs gprof"
+ ;;
+ mips*-*-bsd*)
+ noconfigdirs="$noconfigdirs gprof ld"
+ ;;
mips*-*-*)
noconfigdirs="$noconfigdirs gprof"
;;
+ romp-*-*)
+ noconfigdirs="bfd binutils ld gas opcodes"
+ ;;
sh-*-*)
case "${host}" in
i[34]86-*-vsta) ;; # don't add gprof back in
esac
;;
sparc-*-sunos4*)
- use_gnu_ld=no
- ;;
- sparc-*-solaris2*)
- # See i386-*-solaris2* above.
- noconfigdirs="$noconfigdirs ld"
+ if [ x${is_cross_compiler} != xno ] ; then
+ noconfigdirs="$noconfigdirs gdb gdbtest newlib sim dejagnu expect tcl"
+ else
+ use_gnu_ld=no
+ fi
;;
- i[34]86-*-sco*)
- noconfigdirs="$noconfigdirs gprof"
+ vax-*-vms)
+ noconfigdirs="$noconfigdirs bfd binutils gdb ld newlib opcodes"
;;
- *-*-sysv4)
- use_gnu_ld=no
+ vax-*-*)
+ noconfigdirs="$noconfigdirs newlib"
;;
- *-*-lynxos*)
+ *-*-lynxos*)
# Newlib makes problems for libg++ in crosses.
noconfigdirs="$noconfigdirs newlib"
;;
- *-*-vms)
- noconfigdirs="$noconfigdirs bfd ld binutils gdb"
- ;;
esac
notsupp=""
# supported by the one or two programs in a package.
if [ -n "${notsupp}" ] && [ -z "${norecursion}" ]; then
+ # If $appdirs is non-empty, at least one of those directories must still
+ # be configured, or we error out. (E.g., if the gas release supports a
+ # specified target in some subdirs but not the gas subdir, we shouldn't
+ # pretend that all is well.)
+ if [ -n "$appdirs" ]; then
+ for dir in $appdirs ; do
+ if [ -r $dir/Makefile.in ] && echo "# ${configdirs} #" | grep "${dir} " >/dev/null 2>&1 ; then
+ appdirs=""
+ break
+ fi
+ done
+ if [ -n "$appdirs" ]; then
+ echo "*** This configuration is not supported by this package." 1>&2
+ exit 1
+ fi
+ fi
+ # Okay, some application will build, or we don't care to check. Still
+ # notify of subdirs not getting built.
echo "*** This configuration is not supported in the following subdirectories:" 1>&2
echo " ${notsupp}" 1>&2
echo " (Any other directories should still work fine.)" 1>&2