+
+ * nlm/gdbserve.c: conditionalize header file inclusion for either
+ NetWare 4.0 or PIN targets.
+ * nlm/i386.c: include appropriate header files.
+ * nlm/prelude.c: define TERMINATE_BY_UNLOAD for NetWare 4.0
+ targets.
+
+
+ * nlm/ppc.c (set_step_traps clear_step_traps): Cleanups.
+ * nlm/gdbserve.def: Autoload clib.
+
+
+ * breakpoint.c (condition_command): Call breakpoints_changed.
+
+ * gdbtypes.h: Declare f77_create_literal_string_type and
+ f77_create_literal_complex_type.
+ * valops.c (f77_value_literal_string, f77_value_substring,
+ f77_value_literal_complex): Use xmalloc not malloc.
+ * valops.c (f77_value_literal_string, f77_value_substring):
+ Make addr char * not CORE_ADDR.
+ * value.h (struct value): Add new field literal_data of aligner union.
+ (VALUE_LITERAL_DATA): Use it.
+ * f-lang.h: Declare find_common_for_function.
+ * value.h, valops.c: Split VALUE_SUBSTRING_START into memaddr and
+ myaddr fields of a union. Don't overload it with the frame field
+ (not sure this is necessary; I'm not sure what lval_* codes
+ VALUE_SUBSTRING_* can be used with).
+
+
+ * config/a29k/{a29k-kern.mt,a29k-udi.mt,a29k.mt,ultra3.mh,
+ ultra3.mt}: Clean up comments, remove no-longer-used definitions.
+
+ * rs6000-nat.c: Include libbfd.h again, needed until reference
+ to bfd_cache_lookup is cleaned out.
+
+ * config/i386/linux.mh (XM_CLIBS): Add -lm.
+
+
+ Work to reduce the interrupts-off duration when running in DOS.
+ * ser-go32.c: (dos_async_ready): See if anything is in the buffer.
+ (dos_async_rx): rewrite to unpack as many characters from the
+ asynctsr as possible into a local buffer.
+
+
+ Initial Fortran language support, adapted from work by Farooq Butt
+ * Makefile.in: Add Fortran-related files and dependencies.
+ * defs.h (language_fortran): New language enum.
+ * language.h (_LANG_fortran): Define.
+ (MAX_FORTRAN_DIMS): Define.
+ * expression.h: Reformat to standard.
+ (MULTI_F77_SUBSCRIPT, OP_F77_UNDETERMINED_ARGLIST,
+ OP_F77_LITERAL_COMPLEX, OP_F77_SUBSTR): New expression opcodes.
+ * gdbtypes.h (TYPE_CODE_COMPLEX, TYPE_CODE_LITERAL_COMPLEX,
+ TYPE_CODE_LITERAL_STRING): New type codes.
+ (type): New fields upper_bound_type and lower_bound_type.
+ (TYPE_ARRAY_UPPER_BOUND_TYPE, TYPE_ARRAY_LOWER_BOUND_TYPE,
+ TYPE_ARRAY_UPPER_BOUND_VALUE, TYPE_ARRAY_LOWER_BOUND_VALUE): New
+ macros.
+ (builtin_type_f_character, etc): Declare.
+ * value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_START): Define.
+ * f-exp.y: New file, Fortran expression grammar.
+ * f-lang.c: New file, Fortran language support functions.
+ * f-lang.h: New file, Fortran language support declarations.
+ * f-typeprint.c: New file, Fortran type printing.
+ * f-valprint.c: New file, Fortran value printing.
+ * eval.c (evaluate_subexp): Add code for new expression opcodes,
+ fix wording of error message.
+ * gdbtypes.c (f77_create_literal_complex_type,
+ f77_create_literal_string_type): New functions.
+ * language.c (set_language_command): Add Fortran info.
+ (calc_f77_array_dims): New function.
+ * parse.c (length_of_subexp, prefixify_subexp): Add cases for new
+ expression opcodes.
+ * symfile.c (deduce_language_from_filename): Recognize .f and .F
+ as Fortran source files.
+ * valops.c (f77_value_literal_string, f77_value_substring,
+ f77_value_literal_complex): New functions.
+
+
+ * c-typeprint.c (c_print_type): Assume demangled arguments
+ if a '(' is found in varstring, Looking for ')' at the end of
+ varstring did fail with demangled const member functions, which
+ have a trailing `const'.
+ * remote.c (get_offsets, putpkt): Change to `char' buffers,
+ to avoid errors when compiling with DEC c89.
+ (remote_wait): Cast to `char *' before passing buffer to
+ fputs_filtered, to avoid errors when compiling with DEC c89.
+ (remote_wait): Do not return inferior_pid by default, this
+ statement is never reached, which causes warnings from some
+ compilers.
+ * stabsread.c (scan_file_globals): Ignore static minimal symbols.
+ * symfile.c (load_command): If called with no argument, try
+ to get the filename from the executable file.
+ (generic_load): Remove check for NULL filename, it is done
+ in load_command now.
+
+
+ * hppa-tdep.c (skip_trampoline_code): Revert incorrect change
+ from June 2, 1994 (what was I thinking?!?). Fix it right this
+ time.
+
+
+ * nlm/i386.c, nlm/i386.h: New files that contain i386 specific code.
+
+
+ * README: Grammar improvements, clarifications, updates.
+
+
+ * Makefile.in (TARGET_FLAGS_TO_PASS): Pass down LD_FOR_TARGET and
+ NLMCONV_FOR_TARGET. (SUBDIRS): Add nlm target.
+ * configure.in (powerpc-*-netware*): Automatically configure nlm
+ subdir.
+ * nlm/Makefile.in: Add {CC NLMCONV LD}_FOR_TARGET. Remove alpha
+ specific stuff. Make things more configurable.
+ * nlm/configure.in: Add powerpc-*-netware* target. Use
+ gdbserve.mt/cpu.c/cpu.h for target stuff. Get rid of tm/xm/nm.h
+ files.
+ * nlm/gdbserve.c: Move Alpha specific stuff into other files.
+ Remove lots of architecture-specific stuff.
+ * nlm/gdbserve.def: Add new imports.
+ * nlm/ppc.c, nlm/ppc.h: New files that contain PowerPC specific code.
+ * nlm/prelude.c: Don't include libhooks.h, get rid of call to
+ register library.
+ * nlm/prelude.o: What was this doing here?
+ * config/alpha/gdbserve.mt: Defs for alpha nlm stub.
+ * config/powerpc/gdbserve.mt: Defs for PowerPC nlm stub.
+ * config/powerpc/ppc-nw.mt: Defs for PowerPC target for GDB.
+ * config/powerpc/tm-ppc-nw.h: Ditto.
+
+ * nlmstub.def: New file, contains imports for 386 nlm stub.
+
+
+ * remote-pa.c: New file for HPPA embedded support. Currently it's
+ a copy of remote.c.
+ * config/pa/hppabsd.mt,hppahpux.mt,hppaosf.mt: User remote-pa.c.
+
+
+ * config/m68k/tm-delta68.h (EXTRACT_RETURN_VALUE,
+ STORE_RETURN_VALUE): Define to use %a0 for pointers.
+
+
+ * remote-mips.c: Remove unused declaration of mips_load.
+
+
+ * coffread.c: General cleanup, and support for section offsets.
+ (time.h, sys/types.h, libbfd.h): Don't include.
+ (cur_src_start_addr, cur_src_end_addr): Rename to
+ current_source_start_addr, current_source_end_addr.
+ (nlist_stream_global): Remove.
+ (nlist_bfd_global): New global variable.
+ (coff_symfile_read): Remove code that gets and uses fileno()
+ directly.
+ (read_coff_symtab, enter_linenos, process_coff_symbol): Add
+ section_offsets parameter, add text/data section offset to
+ appropriate symbols' values.
+ (read_one_sym): Use bfd_read instead of fread.
+ (init_stringtab, init_lineno): Change first parameter to a bfd,
+ use bfd routines instead of raw I/O.
+
+
+ * symtab.c (decode_line_1): If funfirstline and we get a
+ non-LOC_BLOCK symbol (e.g. variable or type), then error().
+
+ * Makefile.in (TARFILES, NONSRC, SFILES_STAND, SFILES_KGDB):
+ Remove; unused.
+ (TAGFILES_NO_SRCDIR): Remove ALLPARAM.
+ (HFILES_NO_SRCDIR): Remove all files in config sub-directory.
+ (TAGS): Also pass result of find on config sub-directory to etags.
+ (ALLPARAM): Remove; now unused.
+
+
+ * Makefile.in (VERSION): Bump to 4.13.1
+ * NEWS, README: Update to match gdb 4.13 release version.
+
+
+ * cxux-nat.c: Remove dangling #else block.
+ (m88k_harris_core_register_addr): New function.
+
+ * environ.c (init_environ): If no environment, do nothing.
+
+
+ * remote.c (remote_wait): Return inferior_pid instead of 0 for
+ `W` message.
+
+
+ * sparclite/aload.c (sys_error, error): Use vfprintf to variable
+ argument lists.
+
+
+ * defs.h (concat, basename, buildargv, freeargv, strerrno, strsigno,
+ errno_max, signo_max, strtoerrno, strtosigno): Delete.
+ Include "libiberty.h" instead.
+
+
+ * i386v-nat.c (i386_insert_nonaligned_watchpoint):
+ add additional argument specifying raw address to permit
+ proper release of debug registers.
+ (i386_insert_watchpoint, i386_insert_aligned_watchpoint):
+ change all callers.
+
+
+ * defs.h, top.c: Use `extern' in declarations of GUI hooks, and
+ define them in top.c. Add comments to the hooks.
+
+
+ * remote-sim.c (gdbsim_ops): Set `to_insert_breakpoint' and
+ `to_remove_breakpoint' fields.
+
+
+ * infcmd.c (run_command): Remove comment suggesting using
+ target_has_execution instead of inferior_pid.
+
+
+ * remote-mips.c (mips_open): add code to handle baud rate.
+
+
+ * infrun.c (wait_for_inferior): Call target_resume() upon
+ detection of new processes.
+
+ * procfs.c (create_procinfo): Return pointer to new procinfo
+ structure.
+ * (do_detach): Spacing & formatting cleanup.
+ * (procfs_wait): Move wait_again label to ensure that we really
+ wait again. On exit from fork, release new child from gdbs'
+ clutches.
+ * (procfs_set_sproc_trap): Enable trapping of fork and vfork.
+
+
+ * i386-nlmstub.c (handle_exception): Wait until the thread has
+ been started before killing the NLM by pointing the PC at
+ _exit().
+
+
+ * config/mips/tm-irix5.h (IN_SIGTRAMP): Redefine for Irix 5,
+ Irix 5 has a standard _sigtramp signal handler.
+ * irix5-nat.c (solib_add): Get rid of sigtramp_address handling,
+ it is not needed for a standard _sigtramp signal handler.
+ Add shared library sections to the section table of the target
+ before adding the symbols.
+ * mips-tdep.c (mips_skip_prologue): Do not skip load immediate
+ instructions that do not prepare a stack adjustment.
+ * regex.c (SIGN_EXTEND_CHAR): Update to emacs-19.25 definition,
+ which does the right thing on machines where `char' is unsigned.
+
+
+ * remote.c (remote_open): Move setting of inferior_pid prior to
+ call to remote_start_remote. Also use unique value for pid to
+ avoid confusion with read_register_pid & friends.
+ * (remote_wait): Return inferior_pid instead of 0 in all cases.
+
+
+ * dwarfread.c (bfd.h): Don't include.
+
+
+ * i386-nlmstub.c (handle_exception): Point the PC at _exit() to
+ kill the program being debugged. KillMe(), the undocumented
+ call intended for this purpose, causes the server to hang.
+
+
+ * remote.c (read_frame): Calculate run length encoded checksum
+ correctly.
+ * config/sh/stub.c: New file.
+
+
+ * target.c (find_default_run_target): Make sure to_can_run is set
+ before calling it.
+
+
+ * TODO: Remove note about fast watchpoints and remove obsolete
+ Mach stuff.
+
+
+ * config/i386/xm-i386v4.h, config/m68k/xm-m68kv4.h,
+ config/sparc/xm-sun4sol2.h (NORETURN): Don't define.
+ * config/m88k/tm-cxux.h (ARCH_NUM_REGS): Undefine before defining.
+
+
+ * target.c (add_target): Don't call clean_target on target
+ vectors anymore.
+ * (unpush_target): Test for to_close being set before calling.
+ * (target_xfer_memory, target_info): Check for to_has_memory
+ before playing with memory.
+
+ * remote.c (remote_open): Set inferior_pid to make kill command
+ happy.
+ * inflow.c (kill_command): Revert change of Aug 2. Use
+ inferior_pid to determine whether to print out "The program is not
+ being run." message.
+
+
+ * config/i386/i386m3.mh (NAT_CLIBS): Add -lmachid and -lnetname.
+ * m3-nat.c, config/nm-m3.h: #if 0 REQUEST_QUIT stuff.
+ * m3-nat.c: Pass argument to return_to_top_level.
+ Declare m3_kill_inferior before use.
+ (port_chain_insert): In "can't happen" case, abort rather than
+ setting `mid' to large decimal constant (which gcc warns about).
+ (get_thread_name): Use cast to convert const char * to char *.
+ (add_mach_specific_commands): #if 0 "thread break" command.
+ (m3_trace_him): Call push_target.
+ (mach_really_wait): New argument pid; remove unused
+ variable pid.
+ (intercept_exec_calls): Call target_terminal_init and
+ target_terminal_inferior once the child execs.
+ * infrun.c (proceed): Pass argument to PREPARE_TO_PROCEED.
+
+
+ * procfs.c (procfs_mourn_inferior): don't dereference the
+ procinfo pointer after it has been freed.
+
+
+ * breakpoint.c (breakpoint_1): Improve pluralization in display
+ of breakpoint hit counts.
+
+ * language.h (struct language_defn): Remove unused field
+ la_longest_float.
+ (longest_float): Remove, no longer used.
+ * language.c (unknown_language_defn, auto_language_defn,
+ local_language_defn): Remove init of la_longest_float field.
+ * c-lang.c (c_language_defn, cplus_language_defn,
+ asm_language_defn): Ditto.
+ * ch-lang.c (chill_language_defn): Ditto.
+ * m2-lang.c (m2_language_defn): Ditto.
+
+
+ * defs.h (bfd_read, bfd_seek): Remove declarations.
+ * os9kread.c, rs6000-nat.c (libbfd.h): Don't include.
+
+
+ * inflow.c (kill_command): Fix a bug which prevented target
+ programs to be killed.
+
+
+ * defs.h: Change two-line declarations to one-line form.
+ (NORETURN): Define as "volatile" only for older GCCs.
+ (ATTR_NORETURN): Define for newer GCCs.
+ * procfs.c (proc_init_failed): Add ATTR_NORETURN to declaration.
+
+
+ * breakpoint.c (mention), main.c (fputs_unfiltered): Add comments.
+ * breakpoint.c (delete_breakpoint, enable_breakpoint,
+ disable_breakpoint): Don't call breakpoints_changed; it is now
+ called via the *_breakpoint_hook functions.
+ * annotate.c (_initialize_annotate, breakpoint_changed): New functions.
+
+
+ * stabsread.c (read_type): Fix a bug in enum size calculation.
+
+
+ * hppa-tdep.c (compare_unwind_entries): Add "const" to both
+ argument types to shut up GCC.
+
+ * hppa-tdep.c (saved_pc_after_call): If the saved PC is in a
+ linker stub, then return the address the stub will return to.
+ (frame_saved_pc): Correctly restart the search for the saved
+ pc when a linker stub is encountered.
+
+ * hppa-tdep.c (inst_saves_gr): Handle 16 and 8 bit instruction
+ register stores emitted by the version 9 HP compilers.
+ (inst_saves_fr): Relax test for a specific base register (%r1);
+ this avoids losing with the version 9 HP compilers.
+ (skip_prologue): Try to skip argument stores emitted by the HP
+ compilers. It's not perfect, but it's better than before.
+
+
+ * findvar.c (write_pc write_pc_pid): Remove casts to long when
+ calling write_register_pid.
+ * (write_register_pid): Add prototype.
+
+
+ * remote.c (read_frame): Split readchar/checksum calculation into
+ two parts since evaluation order is undefined.
+
+
+ * Makefile.in (coredep.o): Add inferior.h as dependency.
+ * inflow.c: Add F_SETOWN to list of defines to check
+ around code that uses F_SETOWN.
+
+
+ * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): If using newlib,
+ set the -L and -B directory prefixes so we can link with it.
+
+
+ * Makefile.in (INSTALLED_LIBS, CLIBS, DEPFILES): Add support for
+ --enable-xxx configure option by adding ENABLE_{CLIBS DEPFILES}
+ where appropriate.
+
+ * General hackery to support alternate user-interface.
+ * breakpoint.c (mention, delete_breakpoint, enable_breakpoint,
+ disable_breakpoint): Call hooks for alternate user-interface.
+ * defs.h: Add declarations for alternate user-interface hooks.
+ * main.c (main): Add --nw (and --nowindows) options to disable
+ the GUI.
+ * (near call to command_loop): Call command_loop_hook if set.
+ * (fputs_unfiltered): Call fputs_unfiltered_hook if set.
+ * stack.c: Call print_frame_info_listing_hook if set.
+ * top.c (gdb_init): Initialize targets.c and utils.c prior to
+ other files to make sure that calls to error and warning will
+ work. Call init_ui_hook after everything else.
+ * utils.c (query): Call query_hook if set.
+ * (gdb_flush): Call flush_hook if set.
+ * Change _initialize_utils to initialize_utils cuz we don't use
+ automatic initialization of utils.c anymore.
+
+ * Support for TK GUI.
+ * Makefile.in: Add rule for gdbtk.o.
+ * configure.in: Add support for --enable-gdbtk.
+ * gdbtk.c: New file. Contains support routines for TK interface.
+ * gdbtk.tcl: New file. Implements GUI policy.
+
+ * remote.c: Get rid of #ifdef DONT_USE_REMOTE. It's no longer
+ necessary.
+
+
+ * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Use newlib if it is
+ there and we are using the gcc from the tree.
+ (LD_FOR_TARGET): Look for ld in ../ld/ld.new.
+
+
+ * Makefile.in (annotate.o): Add dependencies.
+
+
+ * sparclite/aload.c: Added new -q (quiet) option.
+ return 0 exit status if file was successfully downloaded.
+
+ * nlm/gdbserve.c: merge in command line argument parsing changes
+ and bug fixes made to i386-nlmstub.c.
+
+ * i386-nlmstub.c: The returnLength field must be initialized
+ before portConfig is passed to AIOGetPortConfiguration.
+ Compare command line arguments with strnicmp(); args are
+ case insensitive on netware.
+
+
+ * Makefile.in (DISTSTUFF): Add definition.
+ (diststuff): Add for new distribution support.
+ (gdb.tar.Z, make-proto-gdb.dir, setup-to-dist,
+ gdb-$(VERSION).tar.Z, make-proto-gdb-1, make-proto-testsuite.dir):
+ Remove old distribution building rules, now uses standard
+ distribution support in parent directory Makefile.in.
+
+
+ * target.c (push_target): Cast result from xmalloc.
+
+Tue Jul 26 18:20:46 1994 Paul Flinders (ptf@smee)
+
+ * elfread.c (elf_symtab_read): Discard compiler labels generated
+ by the Solaris 2.1/Intel SunPro compiler.
+
+
+ * target.c (nomemory): Fix prototype and routine to take correct
+ args.
+
+
+ * Makefile.in (clean): Remove libgdb-files.
+
+
+ * coredep.c: Include inferior.h.
+
+
+ * i386-nlmstub.c: Add support for NODE, PORT and BAUD command
+ line arguments.
+
+ * symfile.c (deduce_language_from_filename): Recognize .S as asm,
+ .cp as C++, alphabetize better.
+
* breakpoint.c (ignore, condition): Move usage note into body of
help text, so first line can be one-line summary.
projects / binutils.git / blobdiff