+
+ * Makefile.in (all-bfd): Depend upon all-libiberty.
+
+ * ltconfig, ltmain.sh: Bring in newer cygwin32 support.
+
+
+ * Makefile.in: Add libstub.
+
+ * configure.in: Ditto. Build libstub for targets that have cygmon
+ support.
+
+
+ * configure.in: Don't set PICFLAG on ix86-cygwin32.
+
+
+ * configure.in: Recognise i[3456]96-*-sysv5* as a valid host, and
+ use mh-sysv5 if specified. Support gprof on SCO Open Server.
+
+
+ * ltconfig: Add cygwin32 support.
+
+ * Makefile.in, configure.in: Add libtool as a native only directory
+ to configure and build.
+
+
+ * Makefile.in (EXTRA_GCC_FLAGS): XFOO lines shortened.
+
+
+ * Makefile.in: add ash make rules
+ * configure.in: add ash to native_only and host_tools lists
+
+start-sanitize-ide
+
+ * Makefile.in: Add libidetcl, like libide.
+ (all-libide): Remove dependencies on all-tcl, all-tk, all-itcl,
+ all-ilu.
+ * configure.IN: Add libidetcl, like libide.
+ * configure (GDB_TK): If enable_ide, add all-libidetcl.
+
+end-sanitize-ide
+
+ * Makefile.in (all-gettext, all-intl): New targets.
+ (ALL_MODULES): Added all-gettext, all-intl.
+ (CROSS_CHECK_MODULES): Added check-gettext, check-intl.
+ (INSTALL_MODULES): Added install-gettext, install-intl.
+ (CLEAN_MODULES): Added clean-gettext, clean-intl.
+
+ * configure.in (host_tools): Added gettext.
+ (native_only): Likewise.
+ (noconfigdirs) [various cases]: Likewise.
+ (host_libs): Added intl.
+
+start-sanitize-gdbtk
+
+ * configure: Do not disable building gdbtk for cygwin32 hosts.
+
+end-sanitize-gdbtk
+
+ * Makefile.in: Revert yesterday's change.
+ (all-target-winsup): all-target-librx stays out of here.
+
+
+ * Makefile.in (TARGET_CONFIGDIRS, ALL_TARGET_MODULES,
+ CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES,
+ INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES, all-target-winsup):
+ Remove references to librx and libg++.
+
+
+ * Makefile.in (BASE_FLAGS_TO_PASS): Pass $(lispdir) down to
+ recursive makes
+
+
+ * Makefile.in (CC_FOR_TARGET): Use $(TARGET_SUBDIR) when passing -B
+ for newlib directory.
+ (CXX_FOR_TARGET): Likewise.
+
+
+ * ltconfig: Update after libtool/ltconfig.in change for
+ hpux11.
+
+
+ * ltconfig, ltmain.sh: Update to libtool 1.2.
+
+
+ * configure.in: Add Thumb-pe target.
+
+ * Makefile.in - changed sn targets to snavigator
+ * configure.in - changed sn targets to snavigator
+
+
+ * config.sub: Accept alphapca56 and alphaev6 properly.
+
+start-sanitize-vr4320
+
+ * config.sub (mips64vr4320-unknown-elf) : Added.
+
+end-sanitize-vr4320
+
+
+ * Makefile.in (INSTALL_MODULES): Move install-tcl before
+ install-itcl.
+ (install-itcl): Remove dependency on install-tcl.
+
+
+ * configure.in: Remove libgloss from noconfigdirs for MN10300.
+
+
+ * configure: Don't let builds be done in source tree.
+
+
+ * configure.in: Don't build libgui for a cygwin32 target when not on
+ a cygwin32 host.
+
+
+ * configure (redirect): Set to null, so default behavior of
+ configure is now --verbose.
+
+
+ * ltmain.sh (mkdir): Check that the directory doesn't exist
+ before we exit with error, so that we don't get races during
+ parallel builds.
+
+
+ * ltconfig, ltmain.sh: Update from libtool 1.0i.
+
+
+ * configure.in (host_tools, native_only): Add libtool.
+
+
+ * configure.in: add target-gperf to noconfigdirs for Cygwin32.
+ Fix typo in ming config comment.
+
+
+ * ltconfig, ltmain.sh: Update from libtool 1.0h.
+
+
+ * config.sub: Add tic30 cases, and map c30 to tic30.
+
+
+ * configure.in: Remove expect from noconfigdirs when target
+ is cygwin32. OK to build expect and dejagnu with Canadian
+ Cross.
+
+start-sanitize-sky
+
+ * configure.in: Add dvp-elf support.
+ * config.sub: Recognize dvp cpu.
+
+end-sanitize-sky
+
+ * configure.in: Do build expect, dejagnu, and cvssrc for a cygwin32
+ host.
+
+ * config.guess: Use ${UNAME_MACHINE} rather than i386 for cygwin32
+ and mingw32.
+
+
+ * Makefile.in (BASE_FLAGS_TO_PASS): Remove passing $(local_prefix)
+ here as it is not defined in the toplevel Makefile.
+
+
+ * configure (package_makefile_rules_frag): New variable, which names
+ a file with generic rules, ...
+ Change comment to mention we now have FIVE parts.
+ * configure: Undo last change.
+
+
+ * config.guess: More accurate determination of HP processor types.
+ * config.sub: More accurate determination of HP processor types.
+
+
+ * configure (package_makefile_frag): Move inserting the
+ ${package_makefile_frag} to where it should be according
+ to the comment.
+
+
+ * config.guess: Add support for Linux/ARM.
+
+
+ * .cvsignore: Remove *-info and *-install since they match
+ release-info and mpw-install, which we don't want to just ignore.
+
+
+ * Makefile.in (FLAGS_TO_PASS): Pass down gcc_include_dir and
+ local_prefix to sub-make invocations.
+
+
+ * configure.in: Check makefile fragments in the source
+ directory.
+
+
+ * configure.in: check whether host and target makefile
+ fragments exist before adding them to *_makefile_frag
+
+
+ * configure.in (target_configdirs): Add cygmon for sparc64-elf.
+
+
+ * configure.in: Make sure we only replace RPATH_ENVVAR on
+ lines which begin with RPATH_ENVVAR, i.e. add "^" to the
+ regexp to sed.
+
+ * Makefile.in (BASE_FLAGS_TO_PASS): Pass RRPATH_ENVVAR down
+ to sub-makes.
+
+
+ * config-ml.in (multi-do): LDFLAGS must include multilib
+ designator.
+
* config.guess: Recognize i[3456]-i586-UnixWare7-sysv5.
* config.guess: HP 9000/803 is a PA1.1 machine.
-start-sanitize-sky
-
- * configure.in: Add txvu-elf support.
- * config.sub: Recognize txvu cpu.
-
-end-sanitize-sky
start-sanitize-vr5400
* ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.
+start-sanitize-gdbtk
* configure (tooldir): enable_gdbtk=YES for cygwin32, NO for
windows. Consistent with gdb/configure.
+end-sanitize-gdbtk
* config/mt-linux: Define CXXFLAGS to make sure -fvtable-thunks is
+start-sanitize-gdbtk
* configure: enable_gdbtk=no for cygwin32-hosted toolchains
+end-sanitize-gdbtk
* configure.in: remove make from disable-if-Can-Cross list
enable gdb if ${host} and ${target} are cygwin32
* configure.in: Make sure that ${CC} can be used to compile an
executable.
+start-sanitize-gdbtk
* Makefile.in (all-gdb): Depend on $(GDB_TK).
* configure (GDB_TK): Set GDB_TK to either "all-tcl all-tk" or
nothing depending on whether gdbtk is being built.
+end-sanitize-gdbtk
* Makefile.in (newlib.tar.gz): Delete building of newlib's info files.
* configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
(i386-win32 host): Likewise. Don't build readline.
+start-sanitize-gdbtk
* Makefile.in (GDBTK_SUPPORT_DIRS): Define and pass as part of
SUPPORT_FILES to submakes.
+end-sanitize-gdbtk
* Makefile.in (GDB_SUPPORT_DIRS): Add utils.
* configure.in: Recognize --with-newlib.
(sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
+start-sanitize-gdbtk
* Makefile.in: move {all,check,install}-gdb from *_MODULES
to *_X11_MODULES due to gdbtk needing X include files et al.
+end-sanitize-gdbtk
Merge in support for Mac MPW as a host.