# these libraries are used by various programs built for the host environment
#
-host_libs="mmalloc libiberty opcodes bfd readline glob tcl tk tclX"
+host_libs="mmalloc libiberty opcodes bfd readline glob gash tcl tk tclX"
# these tools are built for the host environment
#
host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
- send-pr gprof gdbtest tgas etc expect deja-gnu dejagnu sim
+ prms send-pr gprof gdbtest tgas etc expect dejagnu sim
m4 autoconf ispell grep diff rcs cvs fileutils shellutils
textutils wdiff find emacs uudecode hello tar gzip indent
- recode"
+ recode release sed utils"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
#
-target_libs="libm xiberty newlib libg++"
+target_libs="libm xiberty newlib libio libg++"
## start-sanitize-chill
target_libs="${target_libs} chill chillrt"
# directories to be built in the native environment only
#
-native_only="autoconf cvs diff emacs fileutils find grep groff ispell m4
- rcs sed shellutils textutils wdiff"
+native_only="autoconf cvs emacs fileutils find grep groff gzip hello indent
+ ispell m4 rcs recode sed shellutils tar textutils gash tk uudecode wdiff
+ gprof"
# directories to be built in a cross environment only
#
# per-host:
case "${host}" in
+ m68k-hp-hpux*) host_makefile_frag=config/mh-hp300 ;;
m68k-apollo-sysv*) host_makefile_frag=config/mh-apollo68 ;;
m68k-apollo-bsd*) host_makefile_frag=config/mh-a68bsd ;;
- m88k-motorola-m88kbcs) host_makefile_frag=config/mh-delta88;;
+ m88k-motorola-sysv*) host_makefile_frag=config/mh-delta88;;
m88k-dg-dgux*) host_makefile_frag=config/mh-dgux ;;
- mips-dec-ultrix*) host_makefile_frag=config/mh-decstation ;;
- mips-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;;
- mips-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
+ mips*-dec-ultrix*) host_makefile_frag=config/mh-decstation ;;
+ mips*-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;;
+ mips*-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
+ mips*-*-sysv*) host_makefile_frag=config/mh-riscos ;;
i[34]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
i[34]86-*-sco*) host_makefile_frag=config/mh-sco ;;
i[34]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
- i[34]86-*-linux) host_makefile_frag=config/mh-linux ;;
+ i[34]86-*-linux*) host_makefile_frag=config/mh-linux ;;
i[34]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
i[34]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
*-ibm-aix*) host_makefile_frag=config/mh-aix ;;
*-bull-bosx*) host_makefile_frag=config/mh-aix ;;
- *-sun-solaris*) host_makefile_frag=config/mh-solaris ;;
+ *-*-solaris2*) host_makefile_frag=config/mh-solaris ;;
+ m68k-sun-*) host_makefile_frag=config/mh-sun3 ;;
*-sun-*) host_makefile_frag=config/mh-sun ;;
- *-hp-hpux) host_makefile_frag=config/mh-hpux ;;
+ *-hp-hpux*) host_makefile_frag=config/mh-hpux ;;
+ *-*-hiux*) host_makefile_frag=config/mh-hpux ;;
+ *-*-lynxos*) host_makefile_frag=config/mh-lynxos
+ cross_only="xiberty" ;;
*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
*-*-sysv*) host_makefile_frag=config/mh-sysv ;;
esac
# per-target:
-bfd_target=
+gasdir=gas
+use_gnu_ld=
+use_gnu_as=
case "${target}" in
- a29k-amd-ebmon) bfd_target="ebmon29k" ;;
- a29k-amd-udi) bfd_target="udi29k" ;;
- a29k-amd-*) echo "bad target_os for amd" 1>&2
- exit 1
- ;;
+ hppa*-hp-hpux*) target_makefile_frag=config/mt-hppa ;;
+esac
+
+# some tools are so dependent upon X11 that if we're not building with X,
+# it's not even worth trying to configure, much less build, that tool.
+
+case ${with_x} in
+ yes | "") # the default value for this tree is that X11 is available
+ ;;
+ no)
+ configdirs=`echo ${configdirs} | sed -e 's/tk//;/gash//'`
+ ;;
+ *)
+ echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
+ ;;
esac
-# some tools are only suitable for building in a "native" situation.
+
+# Some tools are only suitable for building in a "native" situation.
# Those are added when we have a host==target configuration. For cross
# toolchains, we add some directories that should only be useful in a
# cross-compiler.
done
fi
+## start-sanitize-for-fsf
-# remove more programs from consideration, based on the host or
+# Remove more programs from consideration, based on the host or
# target this usually means that a port of the program doesn't
-# exist yet.
+# exist yet. This section gets removed for FSF releases,
+# where we want the configure scripts in the subdirectories to
+# complain if the target or host isn't supported.
-#case "${host}" in
-# hppa*-*-*)
-# configdirs=`echo ${configdirs} | sed -e 's/emacs//'`
-# ;;
-#esac
+case "${host}" in
+ alpha-dec-osf1*)
+ configdirs=`echo ${configdirs} | sed -e 's/gdb//'`
+ ;;
+ i[34]86-*-go32)
+ configdirs=`echo ${configdirs} | sed -e 's/tcl//;s/expect//;s/deja-gnu//'`
+ configdirs=`echo ${configdirs} | sed -e 's/make//;s/texinfo//;s/bison//'`
+ configdirs=`echo ${configdirs} | sed -e 's/patch//;s/flex//;s/byacc//'`
+ configdirs=`echo ${configdirs} | sed -e 's/send-pr//;s/gprof//'`
+ configdirs=`echo ${configdirs} | sed -e 's/uudecode//;s/dejagnu//'`
+ configdirs=`echo ${configdirs} | sed -e 's/diff//'`
+ ;;
+esac
case "${target}" in
- mips-dec-bsd*)
-# We do want to build gas in this case. So don't use the mips-*-* case
-# for this target.
+ alpha-dec-osf1*)
+ configdirs=`echo ${configdirs} | sed -e 's/gas //'`
+ configdirs=`echo ${configdirs} | sed -e 's/gdb//;s/emacs//;s/fileutils//'`
+ configdirs=`echo ${configdirs} | sed -e 's/grep//;s/libg++//;s/libio//'`
+ ;;
+ h8300*-*-*)
+ configdirs=`echo ${configdirs} | sed -e 's/libg++//;s/libio//'`
+## start-sanitize-chill
+ configdirs=`echo ${configdirs} | sed -e 's/chillrt//'`
+## end-sanitize-chill
;;
- mips-*-*)
- configdirs=`echo ${configdirs} | sed -e 's/gas//'`
+ h8500-*-*)
+ configdirs=`echo ${configdirs} | sed -e 's/libg++//;s/libio//'`
+## start-sanitize-chill
+ configdirs=`echo ${configdirs} | sed -e 's/chillrt//'`
+## end-sanitize-chill
;;
- rs6000-*-*)
- configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas//'`
+ hppa*-*-osf)
+ # Do configure ld/binutils/gas for this case.
;;
+ m68k-hp-hpux*)
+ configdirs=`echo ${configdirs} | sed -e 's/emacs//'`
+ ;;
hppa*-*-*)
- configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas//'`
+ # HP's C compiler doesn't handle Emacs correctly (but on BSD and Mach
+ # cc is gcc, and on any system a user should be able to link cc to
+ # whatever they want. FIXME, emacs).
+ case "${CC}" in
+ "" | cc*) configdirs=`echo ${configdirs} | sed -e 's/emacs//'` ;;
+ *) echo "building emacs" ;;
+ esac
+ configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas /pagas /;s/shellutils//'`
+ gasdir=pagas
;;
- *-*-solaris2)
- configdirs=`echo ${configdirs} | sed -e 's/ld//;s/gas//'`
+ i[34]86-*-go32)
+ # add the go32 support tools to the list
+ configdirs=`echo go32 ${configdirs}`
+ ;;
+ i[34]86-*-sysv4*)
+ # The SYSV4 C compiler doesn't handle Emacs correctly
+ case "${CC}" in
+ "" | cc*) configdirs=`echo ${configdirs} | sed -e 's/emacs//'` ;;
+ *) ;;
+ esac
+ # but that's okay since emacs doesn't work anyway
+ configdirs=`echo ${configdirs} | sed -e 's/emacs//'`
+ ;;
+ rs6000-*-*)
+ # a gcc built textutils will cause the linker to hang on 'join'
+ configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas //;s/gprof//;s/textutils//'`
+ ;;
+ mips-*-*)
+ configdirs=`echo ${configdirs} | sed -e 's/gprof//'`
+ ;;
+ sh-*-*)
+ case "${host}" in
+ i[34]86-*-go32) ;; # don't add gprof
+ *) configdirs=`echo gprof ${configdirs}` ;;
+ esac
+ ;;
+ sparc-*-sunos4*)
+ use_gnu_ld=no
+ ;;
+ sparc-*-solaris2*)
+ configdirs=`echo ${configdirs} | sed -e 's/ld//'`
+ ;;
+ i[34]86-*-sco*)
+ configdirs=`echo ${configdirs} | sed -e 's/gprof//'`
+ ;;
+ *-*-sysv4)
+ use_gnu_ld=no
;;
*-*-vms)
configdirs=`echo ${configdirs} | sed -e 's/bfd//;s/ld//;s/binutils//'`
;;
esac
+## end-sanitize-for-fsf
-target_makefile_frag=config/mt-${bfd_target}
+# Set with_gnu_as and with_gnu_ld as appropriate.
+#
+# This is done by determining whether or not the appropriate directory
+# is available, and by checking whether or not specific configurations
+# have requested that this magic not happen.
+#
+# The command line options always override the explicit settings in
+# configure.in, and the settings in configure.in override this magic.
+#
+# If the default for a toolchain is to use GNU as and ld, and you don't
+# want to do that, then you should use the --without-gnu-as and
+# --without-gnu-ld options for the configure script.
+
+if [ x${use_gnu_as} = x ] ; then
+ if [ x${with_gnu_as} != xno ] && echo ${configdirs} | grep "${gasdir} " > /dev/null 2>&1 && [ -d ${srcdir}/${gasdir} ] ; then
+ with_gnu_as=yes
+ withoptions="$withoptions --with-gnu-as"
+ fi
+fi
+
+if [ x${use_gnu_ld} = x ] ; then
+ if [ x${with_gnu_ld} != xno ] && echo ${configdirs} | grep ld > /dev/null 2>&1 && [ -d ${srcdir}/ld ] ; then
+ with_gnu_ld=yes
+ withoptions="$withoptions --with-gnu-ld"
+ fi
+fi
#
# Local Variables:
# fill-column: 131
# End:
#
-
projects / binutils.git / blobdiff