/* Remote target communications for serial-line targets in custom GDB protocol
- Copyright (C) 1988-2018 Free Software Foundation, Inc.
+ Copyright (C) 1988-2020 Free Software Foundation, Inc.
This file is part of GDB.
#include "bfd.h"
#include "symfile.h"
#include "target.h"
-/*#include "terminal.h" */
+#include "process-stratum-target.h"
#include "gdbcmd.h"
#include "objfiles.h"
#include "gdb-stabs.h"
#include "cli/cli-setshow.h"
#include "target-descriptions.h"
#include "gdb_bfd.h"
-#include "filestuff.h"
-#include "rsp-low.h"
+#include "gdbsupport/filestuff.h"
+#include "gdbsupport/rsp-low.h"
#include "disasm.h"
#include "location.h"
-#include "gdb_sys_time.h"
+#include "gdbsupport/gdb_sys_time.h"
-#include "event-loop.h"
+#include "gdbsupport/event-loop.h"
#include "event-top.h"
#include "inf-loop.h"
#include "tracepoint.h"
#include "ax.h"
#include "ax-gdb.h"
-#include "agent.h"
+#include "gdbsupport/agent.h"
#include "btrace.h"
#include "record-btrace.h"
#include <algorithm>
-#include "common/scoped_restore.h"
-#include "environ.h"
-#include "common/byte-vector.h"
+#include "gdbsupport/scoped_restore.h"
+#include "gdbsupport/environ.h"
+#include "gdbsupport/byte-vector.h"
+#include "gdbsupport/search.h"
+#include <algorithm>
#include <unordered_map>
+#include "async-event.h"
/* The remote target. */
struct packet_reg;
struct stop_reply;
-static void stop_reply_xfree (struct stop_reply *);
-
-struct stop_reply_deleter
-{
- void operator() (stop_reply *r) const
- {
- stop_reply_xfree (r);
- }
-};
-
-typedef std::unique_ptr<stop_reply, stop_reply_deleter> stop_reply_up;
+typedef std::unique_ptr<stop_reply> stop_reply_up;
/* Generic configuration support for packets the stub optionally
supports. Allows the user to specify the use of the packet as well
bool S = false;
};
-/* About this many threadisds fit in a packet. */
+/* About this many threadids fit in a packet. */
#define MAXTHREADLISTRESULTS 32
/* A buffer to use for incoming packets, and its current size. The
buffer is grown dynamically for larger incoming packets.
Outgoing packets may also be constructed in this buffer.
- BUF_SIZE is always at least REMOTE_PACKET_SIZE;
+ The size of the buffer is always at least REMOTE_PACKET_SIZE;
REMOTE_PACKET_SIZE should be used to limit the length of outgoing
packets. */
- char *buf;
- long buf_size;
+ gdb::char_vector buf;
/* True if we're going through initial connection setup (finding out
about the remote side's threads, relocating symbols, etc.). */
/* The status of the stub support for the various vCont actions. */
vCont_action_support supports_vCont;
+ /* Whether vCont support was probed already. This is a workaround
+ until packet_support is per-connection. */
+ bool supports_vCont_probed;
/* True if the user has pressed Ctrl-C, but the target hasn't
responded to that. */
remote_doc
};
-class remote_target : public target_ops
+class remote_target : public process_stratum_target
{
public:
- remote_target ()
- {
- to_stratum = process_stratum;
- }
+ remote_target () = default;
~remote_target () override;
const target_info &info () const override
{ return remote_target_info; }
+ const char *connection_string () override;
+
thread_control_capabilities get_thread_control_capabilities () override
{ return tc_schedlock; }
void commit_resume () override;
void resume (ptid_t, int, enum gdb_signal) override;
- ptid_t wait (ptid_t, struct target_waitstatus *, int) override;
+ ptid_t wait (ptid_t, struct target_waitstatus *, target_wait_flags) override;
void fetch_registers (struct regcache *, int) override;
void store_registers (struct regcache *, int) override;
void mourn_inferior () override;
- void pass_signals (int, unsigned char *) override;
+ void pass_signals (gdb::array_view<const unsigned char>) override;
int set_syscall_catchpoint (int, bool, int,
gdb::array_view<const int>) override;
- void program_signals (int, unsigned char *) override;
+ void program_signals (gdb::array_view<const unsigned char>) override;
bool thread_alive (ptid_t ptid) override;
void update_thread_list () override;
- const char *pid_to_str (ptid_t) override;
+ std::string pid_to_str (ptid_t) override;
const char *extra_thread_info (struct thread_info *) override;
int handle_len,
inferior *inf) override;
+ gdb::byte_vector thread_info_to_thread_handle (struct thread_info *tp)
+ override;
+
void stop (ptid_t) override;
void interrupt () override;
CORE_ADDR load_module_addr,
CORE_ADDR offset) override;
- bool has_all_memory () override { return default_child_has_all_memory (); }
- bool has_memory () override { return default_child_has_memory (); }
- bool has_stack () override { return default_child_has_stack (); }
- bool has_registers () override { return default_child_has_registers (); }
- bool has_execution (ptid_t ptid) override { return default_child_has_execution (ptid); }
-
bool can_execute_reverse () override;
std::vector<mem_region> memory_map () override;
void async (int) override;
+ int async_wait_fd () override;
+
void thread_events (int) override;
int can_do_single_step () override;
const struct btrace_config *btrace_conf (const struct btrace_target_info *) override;
bool augmented_libraries_svr4_read () override;
- int follow_fork (int, int) override;
- void follow_exec (struct inferior *, char *) override;
+ bool follow_fork (bool, bool) override;
+ void follow_exec (struct inferior *, const char *) override;
int insert_fork_catchpoint (int) override;
int remove_fork_catchpoint (int) override;
int insert_vfork_catchpoint (int) override;
void add_current_inferior_and_thread (char *wait_status);
ptid_t wait_ns (ptid_t ptid, struct target_waitstatus *status,
- int options);
+ target_wait_flags options);
ptid_t wait_as (ptid_t ptid, target_waitstatus *status,
- int options);
+ target_wait_flags options);
ptid_t process_stop_reply (struct stop_reply *stop_reply,
target_waitstatus *status);
struct stop_reply *remote_notif_remove_queued_reply (ptid_t ptid);
struct stop_reply *queued_stop_reply (ptid_t ptid);
int peek_stop_reply (ptid_t ptid);
- void remote_parse_stop_reply (char *buf, stop_reply *event);
+ void remote_parse_stop_reply (const char *buf, stop_reply *event);
void remote_stop_ns (ptid_t ptid);
void remote_interrupt_as ();
char *remote_get_noisy_reply ();
int remote_query_attached (int pid);
- inferior *remote_add_inferior (int fake_pid_p, int pid, int attached,
+ inferior *remote_add_inferior (bool fake_pid_p, int pid, int attached,
int try_open_exec);
ptid_t remote_current_thread (ptid_t oldpid);
int putpkt (const char *buf);
int putpkt_binary (const char *buf, int cnt);
+ int putpkt (const gdb::char_vector &buf)
+ {
+ return putpkt (buf.data ());
+ }
+
void skip_frame ();
- long read_frame (char **buf_p, long *sizeof_buf);
- void getpkt (char **buf, long *sizeof_buf, int forever);
- int getpkt_or_notif_sane_1 (char **buf, long *sizeof_buf, int forever,
+ long read_frame (gdb::char_vector *buf_p);
+ void getpkt (gdb::char_vector *buf, int forever);
+ int getpkt_or_notif_sane_1 (gdb::char_vector *buf, int forever,
int expecting_notif, int *is_notif);
- int getpkt_sane (char **buf, long *sizeof_buf, int forever);
- int getpkt_or_notif_sane (char **buf, long *sizeof_buf, int forever,
+ int getpkt_sane (gdb::char_vector *buf, int forever);
+ int getpkt_or_notif_sane (gdb::char_vector *buf, int forever,
int *is_notif);
int remote_vkill (int pid);
void remote_kill_k ();
};
/* Per-program-space data key. */
-static const struct program_space_data *remote_pspace_data;
+static const struct program_space_key<char, gdb::xfree_deleter<char>>
+ remote_pspace_data;
/* The variable registered as the control variable used by the
remote exec-file commands. While the remote exec-file setting is
static void remote_async_inferior_event_handler (gdb_client_data);
-static int remote_read_description_p (struct target_ops *target);
+static bool remote_read_description_p (struct target_ops *target);
-static void remote_console_output (char *msg);
+static void remote_console_output (const char *msg);
static void remote_btrace_reset (remote_state *rs);
-static void remote_unpush_and_throw (void);
+static void remote_unpush_and_throw (remote_target *target);
/* For "remote". */
/* Controls whether GDB is willing to use range stepping. */
-static int use_range_stepping = 1;
-
-/* The max number of chars in debug output. The rest of chars are
- omitted. */
-
-#define REMOTE_DEBUG_MAX_CHAR 512
+static bool use_range_stepping = true;
/* Private data that we'll store in (struct thread_info)->priv. */
struct remote_thread_info : public private_thread_info
};
remote_state::remote_state ()
+ : buf (400)
{
- /* The default buffer size is unimportant; it will be expanded
- whenever a larger buffer is needed. */
- this->buf_size = 400;
- this->buf = (char *) xmalloc (this->buf_size);
}
remote_state::~remote_state ()
{
xfree (this->last_pass_packet);
xfree (this->last_program_signals_packet);
- xfree (this->buf);
xfree (this->finished_object);
xfree (this->finished_annex);
}
char *buf;
QUIT; /* Allow user to bail out with ^C. */
- getpkt (&rs->buf, &rs->buf_size, 0);
- buf = rs->buf;
+ getpkt (&rs->buf, 0);
+ buf = rs->buf.data ();
if (buf[0] == 'E')
trace_error (buf);
else if (startswith (buf, "qRelocInsn:"))
org_to = to;
- TRY
+ try
{
gdbarch_relocate_instruction (target_gdbarch (), &to, from);
relocated = 1;
}
- CATCH (ex, RETURN_MASK_ALL)
+ catch (const gdb_exception &ex)
{
if (ex.error == MEMORY_ERROR)
{
}
putpkt ("E01");
}
- END_CATCH
if (relocated)
{
adjusted_size = to - org_to;
- xsnprintf (buf, rs->buf_size, "qRelocInsn:%x", adjusted_size);
+ xsnprintf (buf, rs->buf.size (), "qRelocInsn:%x", adjusted_size);
putpkt (buf);
}
}
/* Make sure that the packet buffer is plenty big enough for
this architecture. */
- if (this->buf_size < rsa->remote_packet_size)
- {
- this->buf_size = 2 * rsa->remote_packet_size;
- this->buf = (char *) xrealloc (this->buf, this->buf_size);
- }
+ if (this->buf.size () < rsa->remote_packet_size)
+ this->buf.resize (2 * rsa->remote_packet_size);
}
else
rsa = &it->second;
return &m_remote_state;
}
-/* Cleanup routine for the remote module's pspace data. */
-
-static void
-remote_pspace_data_cleanup (struct program_space *pspace, void *arg)
-{
- char *remote_exec_file = (char *) arg;
-
- xfree (remote_exec_file);
-}
-
/* Fetch the remote exec-file from the current program space. */
static const char *
{
char *remote_exec_file;
- remote_exec_file
- = (char *) program_space_data (current_program_space,
- remote_pspace_data);
+ remote_exec_file = remote_pspace_data.get (current_program_space);
if (remote_exec_file == NULL)
return "";
static void
set_pspace_remote_exec_file (struct program_space *pspace,
- char *remote_exec_file)
+ const char *remote_exec_file)
{
- char *old_file = (char *) program_space_data (pspace, remote_pspace_data);
+ char *old_file = remote_pspace_data.get (pspace);
xfree (old_file);
- set_program_space_data (pspace, remote_pspace_data,
- xstrdup (remote_exec_file));
+ remote_pspace_data.set (pspace, xstrdup (remote_exec_file));
}
/* The "set/show remote exec-file" set command hook. */
show_remote_exec_file (struct ui_file *file, int from_tty,
struct cmd_list_element *cmd, const char *value)
{
- fprintf_filtered (file, "%s\n", remote_exec_file_var);
-}
-
-static int
-compare_pnums (const void *lhs_, const void *rhs_)
-{
- const struct packet_reg * const *lhs
- = (const struct packet_reg * const *) lhs_;
- const struct packet_reg * const *rhs
- = (const struct packet_reg * const *) rhs_;
-
- if ((*lhs)->pnum < (*rhs)->pnum)
- return -1;
- else if ((*lhs)->pnum == (*rhs)->pnum)
- return 0;
- else
- return 1;
+ fprintf_filtered (file, "%s\n", get_remote_exec_file ());
}
static int
if (regs[regnum].pnum != -1)
remote_regs[num_remote_regs++] = ®s[regnum];
- qsort (remote_regs, num_remote_regs, sizeof (struct packet_reg *),
- compare_pnums);
+ std::sort (remote_regs, remote_regs + num_remote_regs,
+ [] (const packet_reg *a, const packet_reg *b)
+ { return a->pnum < b->pnum; });
for (regnum = 0, offset = 0; regnum < num_remote_regs; regnum++)
{
static remote_target *
get_current_remote_target ()
{
- target_ops *proc_target = find_target_at (process_stratum);
+ target_ops *proc_target = current_inferior ()->process_target ();
return dynamic_cast<remote_target *> (proc_target);
}
to the remote target when gdb connects to it.
This is mostly needed when you debug the Linux kernel: The Linux kernel
expects BREAK g which is Magic SysRq g for connecting gdb. */
-static int interrupt_on_connect = 0;
+static bool interrupt_on_connect = false;
/* This variable is used to implement the "set/show remotebreak" commands.
Since these commands are now deprecated in favor of "set/show remote
interrupt-sequence", it no longer has any effect on the code. */
-static int remote_break;
+static bool remote_break;
static void
set_remotebreak (const char *args, int from_tty, struct cmd_list_element *c)
memory packets to ``host::sizeof long'' bytes - (typically 32
bits). Consequently, for 64 bit targets, the upper 32 bits of an
address was never sent. Since fixing this bug may cause a break in
- some remote targets this variable is principly provided to
+ some remote targets this variable is principally provided to
facilitate backward compatibility. */
static unsigned int remote_address_size;
/* Make sure there is room in the global buffer for this packet
(including its trailing NUL byte). */
- if (rs->buf_size < what_they_get + 1)
- {
- rs->buf_size = 2 * what_they_get;
- rs->buf = (char *) xrealloc (rs->buf, 2 * what_they_get);
- }
+ if (rs->buf.size () < what_they_get + 1)
+ rs->buf.resize (2 * what_they_get);
return what_they_get;
}
}
}
+/* FIXME: needs to be per-remote-target. */
static struct memory_packet_config memory_write_packet_config =
{
"memory-write-packet-size",
"breakpoints is %s.\n"), value);
}
+/* Controls the maximum number of characters to display in the debug output
+ for each remote packet. The remaining characters are omitted. */
+
+static int remote_packet_max_chars = 512;
+
+/* Show the maximum number of characters to display for each remote packet
+ when remote debugging is enabled. */
+
+static void
+show_remote_packet_max_chars (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c,
+ const char *value)
+{
+ fprintf_filtered (file, _("Number of remote packet characters to "
+ "display is %s.\n"), value);
+}
+
long
remote_target::get_memory_write_packet_size ()
{
return get_memory_packet_size (&memory_write_packet_config);
}
+/* FIXME: needs to be per-remote-target. */
static struct memory_packet_config memory_read_packet_config =
{
"memory-read-packet-size",
config->name = name;
config->title = title;
- set_doc = xstrprintf ("Set use of remote protocol `%s' (%s) packet",
+ set_doc = xstrprintf ("Set use of remote protocol `%s' (%s) packet.",
name, title);
show_doc = xstrprintf ("Show current use of remote "
- "protocol `%s' (%s) packet",
+ "protocol `%s' (%s) packet.",
name, title);
/* set/show TITLE-packet {auto,on,off} */
cmd_name = xstrprintf ("%s-packet", title);
if (buf[0] == 'E'
&& isxdigit (buf[1]) && isxdigit (buf[2])
&& buf[3] == '\0')
- /* "Enn" - definitly an error. */
+ /* "Enn" - definitely an error. */
return PACKET_ERROR;
/* Always treat "E." as an error. This will be used for
return PACKET_UNKNOWN;
}
+static enum packet_result
+packet_check_result (const gdb::char_vector &buf)
+{
+ return packet_check_result (buf.data ());
+}
+
static enum packet_result
packet_ok (const char *buf, struct packet_config *config)
{
return result;
}
+static enum packet_result
+packet_ok (const gdb::char_vector &buf, struct packet_config *config)
+{
+ return packet_ok (buf.data (), config);
+}
+
enum {
PACKET_vCont = 0,
PACKET_X,
PACKET_qXfer_libraries,
PACKET_qXfer_libraries_svr4,
PACKET_qXfer_memory_map,
- PACKET_qXfer_spu_read,
- PACKET_qXfer_spu_write,
PACKET_qXfer_osdata,
PACKET_qXfer_threads,
PACKET_qXfer_statictrace_read,
PACKET_MAX
};
+/* FIXME: needs to be per-remote-target. Ignoring this for now,
+ assuming all remote targets are the same server (thus all support
+ the same packets). */
static struct packet_config remote_protocol_packets[PACKET_MAX];
/* Returns the packet's corresponding "set remote foo-packet" command
\f
-static ptid_t magic_null_ptid;
-static ptid_t not_sent_ptid;
-static ptid_t any_thread_ptid;
+/* Take advantage of the fact that the TID field is not used, to tag
+ special ptids with it set to != 0. */
+static const ptid_t magic_null_ptid (42000, -1, 1);
+static const ptid_t not_sent_ptid (42000, -2, 1);
+static const ptid_t any_thread_ptid (42000, 0, 1);
/* Find out if the stub attached to PID (and hence GDB should offer to
detach instead of killing it when bailing out). */
return 0;
if (remote_multi_process_p (rs))
- xsnprintf (rs->buf, size, "qAttached:%x", pid);
+ xsnprintf (rs->buf.data (), size, "qAttached:%x", pid);
else
- xsnprintf (rs->buf, size, "qAttached");
+ xsnprintf (rs->buf.data (), size, "qAttached");
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf,
&remote_protocol_packets[PACKET_qAttached]))
{
case PACKET_OK:
- if (strcmp (rs->buf, "1") == 0)
+ if (strcmp (rs->buf.data (), "1") == 0)
return 1;
break;
case PACKET_ERROR:
- warning (_("Remote failure reply: %s"), rs->buf);
+ warning (_("Remote failure reply: %s"), rs->buf.data ());
break;
case PACKET_UNKNOWN:
break;
if no main executable is open already. */
inferior *
-remote_target::remote_add_inferior (int fake_pid_p, int pid, int attached,
+remote_target::remote_add_inferior (bool fake_pid_p, int pid, int attached,
int try_open_exec)
{
struct inferior *inf;
between program/address spaces. We simply bind the inferior
to the program space's address space. */
inf = current_inferior ();
+
+ /* However, if the current inferior is already bound to a
+ process, find some other empty inferior. */
+ if (inf->pid != 0)
+ {
+ inf = nullptr;
+ for (inferior *it : all_inferiors ())
+ if (it->pid == 0)
+ {
+ inf = it;
+ break;
+ }
+ }
+ if (inf == nullptr)
+ {
+ /* Since all inferiors were already bound to a process, add
+ a new inferior. */
+ inf = add_inferior_with_spaces ();
+ }
+ switch_to_inferior_no_thread (inf);
+ push_target (this);
inferior_appeared (inf, pid);
}
if (try_open_exec && get_exec_file (0) == NULL)
exec_file_locate_attach (pid, 0, 1);
+ /* Check for exec file mismatch, and let the user solve it. */
+ validate_exec_file (1);
+
return inf;
}
static remote_thread_info *get_remote_thread_info (thread_info *thread);
-static remote_thread_info *get_remote_thread_info (ptid_t ptid);
+static remote_thread_info *get_remote_thread_info (remote_target *target,
+ ptid_t ptid);
/* Add thread PTID to GDB's thread list. Tag it as executing/running
according to RUNNING. */
might be confusing to the user. Be silent then, preserving the
age old behavior. */
if (rs->starting_up)
- thread = add_thread_silent (ptid);
+ thread = add_thread_silent (this, ptid);
else
- thread = add_thread (ptid);
+ thread = add_thread (this, ptid);
get_remote_thread_info (thread)->vcont_resumed = executing;
- set_executing (ptid, executing);
- set_running (ptid, running);
+ set_executing (this, ptid, executing);
+ set_running (this, ptid, running);
return thread;
}
/* If this is a new thread, add it to GDB's thread list.
If we leave it up to WFI to do this, bad things will happen. */
- thread_info *tp = find_thread_ptid (currthread);
+ thread_info *tp = find_thread_ptid (this, currthread);
if (tp != NULL && tp->state == THREAD_EXITED)
{
/* We're seeing an event on a thread id we knew had exited.
return;
}
- if (!in_thread_list (currthread))
+ if (!in_thread_list (this, currthread))
{
struct inferior *inf = NULL;
int pid = currthread.pid ();
stub doesn't support qC. This is the first stop reported
after an attach, so this is the main thread. Update the
ptid in the thread list. */
- if (in_thread_list (ptid_t (pid)))
- thread_change_ptid (inferior_ptid, currthread);
+ if (in_thread_list (this, ptid_t (pid)))
+ thread_change_ptid (this, inferior_ptid, currthread);
else
{
- remote_add_thread (currthread, running, executing);
- inferior_ptid = currthread;
+ thread_info *thr
+ = remote_add_thread (currthread, running, executing);
+ switch_to_thread (thr);
}
return;
}
doesn't support qC. This is the first stop reported
after an attach, so this is the main thread. Update the
ptid in the thread list. */
- thread_change_ptid (inferior_ptid, currthread);
+ thread_change_ptid (this, inferior_ptid, currthread);
return;
}
extended-remote which already was debugging an inferior, we
may not know about it yet. Add it before adding its child
thread, so notifications are emitted in a sensible order. */
- if (find_inferior_pid (currthread.pid ()) == NULL)
+ if (find_inferior_pid (this, currthread.pid ()) == NULL)
{
struct remote_state *rs = get_remote_state ();
- int fake_pid_p = !remote_multi_process_p (rs);
+ bool fake_pid_p = !remote_multi_process_p (rs);
inf = remote_add_inferior (fake_pid_p,
currthread.pid (), -1, 1);
return static_cast<remote_thread_info *> (thread->priv.get ());
}
+/* Return PTID's private thread data, creating it if necessary. */
+
static remote_thread_info *
-get_remote_thread_info (ptid_t ptid)
+get_remote_thread_info (remote_target *target, ptid_t ptid)
{
- thread_info *thr = find_thread_ptid (ptid);
+ thread_info *thr = find_thread_ptid (target, ptid);
return get_remote_thread_info (thr);
}
it can simply pass through to the inferior without reporting. */
void
-remote_target::pass_signals (int numsigs, unsigned char *pass_signals)
+remote_target::pass_signals (gdb::array_view<const unsigned char> pass_signals)
{
if (packet_support (PACKET_QPassSignals) != PACKET_DISABLE)
{
char *pass_packet, *p;
- int count = 0, i;
+ int count = 0;
struct remote_state *rs = get_remote_state ();
- gdb_assert (numsigs < 256);
- for (i = 0; i < numsigs; i++)
+ gdb_assert (pass_signals.size () < 256);
+ for (size_t i = 0; i < pass_signals.size (); i++)
{
if (pass_signals[i])
count++;
pass_packet = (char *) xmalloc (count * 3 + strlen ("QPassSignals:") + 1);
strcpy (pass_packet, "QPassSignals:");
p = pass_packet + strlen (pass_packet);
- for (i = 0; i < numsigs; i++)
+ for (size_t i = 0; i < pass_signals.size (); i++)
{
if (pass_signals[i])
{
if (!rs->last_pass_packet || strcmp (rs->last_pass_packet, pass_packet))
{
putpkt (pass_packet);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
packet_ok (rs->buf, &remote_protocol_packets[PACKET_QPassSignals]);
- if (rs->last_pass_packet)
- xfree (rs->last_pass_packet);
+ xfree (rs->last_pass_packet);
rs->last_pass_packet = pass_packet;
}
else
struct remote_state *rs = get_remote_state ();
putpkt (catch_packet);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
result = packet_ok (rs->buf, &remote_protocol_packets[PACKET_QCatchSyscalls]);
if (result == PACKET_OK)
return 0;
signals it should pass through to the inferior when detaching. */
void
-remote_target::program_signals (int numsigs, unsigned char *signals)
+remote_target::program_signals (gdb::array_view<const unsigned char> signals)
{
if (packet_support (PACKET_QProgramSignals) != PACKET_DISABLE)
{
char *packet, *p;
- int count = 0, i;
+ int count = 0;
struct remote_state *rs = get_remote_state ();
- gdb_assert (numsigs < 256);
- for (i = 0; i < numsigs; i++)
+ gdb_assert (signals.size () < 256);
+ for (size_t i = 0; i < signals.size (); i++)
{
if (signals[i])
count++;
packet = (char *) xmalloc (count * 3 + strlen ("QProgramSignals:") + 1);
strcpy (packet, "QProgramSignals:");
p = packet + strlen (packet);
- for (i = 0; i < numsigs; i++)
+ for (size_t i = 0; i < signals.size (); i++)
{
if (signal_pass_state (i))
{
|| strcmp (rs->last_program_signals_packet, packet) != 0)
{
putpkt (packet);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
packet_ok (rs->buf, &remote_protocol_packets[PACKET_QProgramSignals]);
xfree (rs->last_program_signals_packet);
rs->last_program_signals_packet = packet;
{
struct remote_state *rs = get_remote_state ();
ptid_t state = gen ? rs->general_thread : rs->continue_thread;
- char *buf = rs->buf;
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *buf = rs->buf.data ();
+ char *endbuf = buf + get_remote_packet_size ();
if (state == ptid)
return;
else
write_ptid (buf, endbuf, ptid);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (gen)
rs->general_thread = ptid;
else
if (remote_thread_always_alive (ptid))
return 1;
- p = rs->buf;
- endp = rs->buf + get_remote_packet_size ();
+ p = rs->buf.data ();
+ endp = p + get_remote_packet_size ();
*p++ = 'T';
write_ptid (p, endp, ptid);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
return (rs->buf[0] == 'O' && rs->buf[1] == 'K');
}
/* About these extended threadlist and threadinfo packets. They are
variable length packets but, the fields within them are often fixed
- length. They are redundent enough to send over UDP as is the
+ length. They are redundant enough to send over UDP as is the
remote protocol in general. There is a matching unit test module
in libstub. */
int mask, length;
int tag;
threadref ref;
- char *limit = pkt + rs->buf_size; /* Plausible parsing limit. */
+ char *limit = pkt + rs->buf.size (); /* Plausible parsing limit. */
int retval = 1;
/* info->threadid = 0; FIXME: implement zero_threadref. */
}
copy_threadref (&info->threadid, &ref);
- /* Loop on tagged fields , try to bail if somthing goes wrong. */
+ /* Loop on tagged fields , try to bail if something goes wrong. */
/* Packets are terminated with nulls. */
while ((pkt < limit) && mask && *pkt)
struct remote_state *rs = get_remote_state ();
int result;
- pack_threadinfo_request (rs->buf, fieldset, threadid);
+ pack_threadinfo_request (rs->buf.data (), fieldset, threadid);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (rs->buf[0] == '\0')
return 0;
- result = remote_unpack_thread_info_response (rs->buf + 2,
+ result = remote_unpack_thread_info_response (&rs->buf[2],
threadid, info);
return result;
}
resultcount = 0;
/* Assume the 'q' and 'M chars have been stripped. */
- limit = pkt + (rs->buf_size - BUF_THREAD_ID_SIZE);
+ limit = pkt + (rs->buf.size () - BUF_THREAD_ID_SIZE);
/* done parse past here */
pkt = unpack_byte (pkt, &count); /* count field */
pkt = unpack_nibble (pkt, &done);
struct remote_state *rs = get_remote_state ();
int result = 1;
- /* Trancate result limit to be smaller than the packet size. */
+ /* Truncate result limit to be smaller than the packet size. */
if ((((result_limit + 1) * BUF_THREAD_ID_SIZE) + 10)
>= get_remote_packet_size ())
result_limit = (get_remote_packet_size () / BUF_THREAD_ID_SIZE) - 2;
- pack_threadlist_request (rs->buf, startflag, result_limit, nextthread);
+ pack_threadlist_request (rs->buf.data (), startflag, result_limit,
+ nextthread);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (*rs->buf == '\0')
+ getpkt (&rs->buf, 0);
+ if (rs->buf[0] == '\0')
{
/* Packet not supported. */
return -1;
}
*result_count =
- parse_threadlist_response (rs->buf + 2, result_limit,
+ parse_threadlist_response (&rs->buf[2], result_limit,
&rs->echo_nextthread, threadlist, done);
if (!threadmatch (&rs->echo_nextthread, nextthread))
{
/* FIXME: This is a good reason to drop the packet. */
- /* Possably, there is a duplicate response. */
- /* Possabilities :
+ /* Possibly, there is a duplicate response. */
+ /* Possibilities :
retransmit immediatly - race conditions
retransmit after timeout - yes
exit
struct remote_state *rs = get_remote_state ();
putpkt ("qC");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (rs->buf[0] == 'Q' && rs->buf[1] == 'C')
{
const char *obuf;
const char *bufp;
putpkt ("qfThreadInfo");
- getpkt (&rs->buf, &rs->buf_size, 0);
- bufp = rs->buf;
+ getpkt (&rs->buf, 0);
+ bufp = rs->buf.data ();
if (bufp[0] != '\0') /* q packet recognized */
{
while (*bufp++ == 'm') /* reply contains one or more TID */
}
while (*bufp++ == ','); /* comma-separated list */
putpkt ("qsThreadInfo");
- getpkt (&rs->buf, &rs->buf_size, 0);
- bufp = rs->buf;
+ getpkt (&rs->buf, 0);
+ bufp = rs->buf.data ();
}
return 1;
}
return 0;
}
+/* Return true if INF only has one non-exited thread. */
+
+static bool
+has_single_non_exited_thread (inferior *inf)
+{
+ int count = 0;
+ for (thread_info *tp ATTRIBUTE_UNUSED : inf->non_exited_threads ())
+ if (++count > 1)
+ break;
+ return count == 1;
+}
+
/* Implement the to_update_thread_list function for the remote
targets. */
|| remote_get_threads_with_qthreadinfo (&context)
|| remote_get_threads_with_ql (&context))
{
- struct thread_info *tp, *tmp;
-
got_list = 1;
if (context.items.empty ()
/* CONTEXT now holds the current thread list on the remote
target end. Delete GDB-side threads no longer found on the
target. */
- ALL_THREADS_SAFE (tp, tmp)
+ for (thread_info *tp : all_threads_safe ())
{
+ if (tp->inf->process_target () != this)
+ continue;
+
if (!context.contains_thread (tp->ptid))
{
+ /* Do not remove the thread if it is the last thread in
+ the inferior. This situation happens when we have a
+ pending exit process status to process. Otherwise we
+ may end up with a seemingly live inferior (i.e. pid
+ != 0) that has no threads. */
+ if (has_single_non_exited_thread (tp->inf))
+ continue;
+
/* Not found. */
delete_thread (tp);
}
remote_notice_new_inferior (item.ptid, executing);
- thread_info *tp = find_thread_ptid (item.ptid);
+ thread_info *tp = find_thread_ptid (this, item.ptid);
remote_thread_info *info = get_remote_thread_info (tp);
info->core = item.core;
info->extra = std::move (item.extra);
if (rs->use_threadextra_query)
{
- char *b = rs->buf;
- char *endb = rs->buf + get_remote_packet_size ();
+ char *b = rs->buf.data ();
+ char *endb = b + get_remote_packet_size ();
xsnprintf (b, endb - b, "qThreadExtraInfo,");
b += strlen (b);
write_ptid (b, endb, tp->ptid);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (rs->buf[0] != 0)
{
- extra.resize (strlen (rs->buf) / 2);
- hex2bin (rs->buf, (gdb_byte *) &extra[0], extra.size ());
+ extra.resize (strlen (rs->buf.data ()) / 2);
+ hex2bin (rs->buf.data (), (gdb_byte *) &extra[0], extra.size ());
return extra.c_str ();
}
}
struct static_tracepoint_marker *marker)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
xsnprintf (p, get_remote_packet_size (), "qTSTMat:");
p += strlen (p);
p += hexnumstr (p, addr);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
- p = rs->buf;
+ getpkt (&rs->buf, 0);
+ p = rs->buf.data ();
if (*p == 'E')
error (_("Remote failure reply: %s"), p);
/* Ask for a first packet of static tracepoint marker
definition. */
putpkt ("qTfSTM");
- getpkt (&rs->buf, &rs->buf_size, 0);
- p = rs->buf;
+ getpkt (&rs->buf, 0);
+ p = rs->buf.data ();
if (*p == 'E')
error (_("Remote failure reply: %s"), p);
while (*p++ == ','); /* comma-separated list */
/* Ask for another packet of static tracepoint definition. */
putpkt ("qTsSTM");
- getpkt (&rs->buf, &rs->buf_size, 0);
- p = rs->buf;
+ getpkt (&rs->buf, 0);
+ p = rs->buf.data ();
}
return markers;
/* Send the restart command; for reasons I don't understand the
remote side really expects a number after the "R". */
- xsnprintf (rs->buf, get_remote_packet_size (), "R%x", 0);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "R%x", 0);
putpkt (rs->buf);
remote_fileio_reset ();
/* Make sure we leave stdin registered in the event loop. */
terminal_ours ();
- /* We don't have a connection to the remote stub anymore. Get rid
- of all the inferiors and their threads we were controlling.
- Reset inferior_ptid to null_ptid first, as otherwise has_stack_frame
- will be unable to find the thread corresponding to (pid, 0, 0). */
- inferior_ptid = null_ptid;
- discard_all_inferiors ();
-
trace_reset_local_state ();
delete this;
if (rs->remote_async_inferior_event_token)
delete_async_event_handler (&rs->remote_async_inferior_event_token);
- remote_notif_state_xfree (rs->notif_state);
+ delete rs->notif_state;
}
/* Query the remote side for the text, data and bss offsets. */
char *ptr;
int lose, num_segments = 0, do_sections, do_segments;
CORE_ADDR text_addr, data_addr, bss_addr, segments[2];
- struct section_offsets *offs;
- struct symfile_segment_data *data;
if (symfile_objfile == NULL)
return;
putpkt ("qOffsets");
- getpkt (&rs->buf, &rs->buf_size, 0);
- buf = rs->buf;
+ getpkt (&rs->buf, 0);
+ buf = rs->buf.data ();
if (buf[0] == '\000')
return; /* Return silently. Stub doesn't support
else if (*ptr != '\0')
warning (_("Target reported unsupported offsets: %s"), buf);
- offs = ((struct section_offsets *)
- alloca (SIZEOF_N_SECTION_OFFSETS (symfile_objfile->num_sections)));
- memcpy (offs, symfile_objfile->section_offsets,
- SIZEOF_N_SECTION_OFFSETS (symfile_objfile->num_sections));
+ section_offsets offs = symfile_objfile->section_offsets;
- data = get_symfile_segment_data (symfile_objfile->obfd);
+ symfile_segment_data_up data
+ = get_symfile_segment_data (symfile_objfile->obfd);
do_segments = (data != NULL);
do_sections = num_segments == 0;
by assuming that the .text and .data offsets apply to the whole
text and data segments. Convert the offsets given in the packet
to base addresses for symfile_map_offsets_to_segments. */
- else if (data && data->num_segments == 2)
+ else if (data != nullptr && data->segments.size () == 2)
{
- segments[0] = data->segment_bases[0] + text_addr;
- segments[1] = data->segment_bases[1] + data_addr;
+ segments[0] = data->segments[0].base + text_addr;
+ segments[1] = data->segments[1].base + data_addr;
num_segments = 2;
}
/* If the object file has only one segment, assume that it is text
but programs with no code are useless. Of course the code might
have ended up in the data segment... to detect that we would need
the permissions here. */
- else if (data && data->num_segments == 1)
+ else if (data && data->segments.size () == 1)
{
- segments[0] = data->segment_bases[0] + text_addr;
+ segments[0] = data->segments[0].base + text_addr;
num_segments = 1;
}
/* There's no way to relocate by segment. */
if (do_segments)
{
- int ret = symfile_map_offsets_to_segments (symfile_objfile->obfd, data,
- offs, num_segments, segments);
+ int ret = symfile_map_offsets_to_segments (symfile_objfile->obfd,
+ data.get (), offs,
+ num_segments, segments);
if (ret == 0 && !do_sections)
error (_("Can not handle qOffsets TextSeg "
do_sections = 0;
}
- if (data)
- free_symfile_segment_data (data);
-
if (do_sections)
{
- offs->offsets[SECT_OFF_TEXT (symfile_objfile)] = text_addr;
+ offs[SECT_OFF_TEXT (symfile_objfile)] = text_addr;
/* This is a temporary kludge to force data and bss to use the
same offsets because that's what nlmconv does now. The real
solution requires changes to the stub and remote.c that I
don't have time to do right now. */
- offs->offsets[SECT_OFF_DATA (symfile_objfile)] = data_addr;
- offs->offsets[SECT_OFF_BSS (symfile_objfile)] = data_addr;
+ offs[SECT_OFF_DATA (symfile_objfile)] = data_addr;
+ offs[SECT_OFF_BSS (symfile_objfile)] = data_addr;
}
objfile_relocate (symfile_objfile, offs);
remote_target::add_current_inferior_and_thread (char *wait_status)
{
struct remote_state *rs = get_remote_state ();
- int fake_pid_p = 0;
+ bool fake_pid_p = false;
- inferior_ptid = null_ptid;
+ switch_to_no_thread ();
- /* Now, if we have thread information, update inferior_ptid. */
+ /* Now, if we have thread information, update the current thread's
+ ptid. */
ptid_t curr_ptid = get_current_thread (wait_status);
if (curr_ptid != null_ptid)
{
if (!remote_multi_process_p (rs))
- fake_pid_p = 1;
+ fake_pid_p = true;
}
else
{
double duty as both the pid of the target process (if it has
such), and as a flag indicating that a target is active. */
curr_ptid = magic_null_ptid;
- fake_pid_p = 1;
+ fake_pid_p = true;
}
remote_add_inferior (fake_pid_p, curr_ptid.pid (), -1, 1);
/* Add the main thread and switch to it. Don't try reading
registers yet, since we haven't fetched the target description
yet. */
- thread_info *tp = add_thread_silent (curr_ptid);
+ thread_info *tp = add_thread_silent (this, curr_ptid);
switch_to_thread_no_regs (tp);
}
remote_target::process_initial_stop_replies (int from_tty)
{
int pending_stop_replies = stop_reply_queue_length ();
- struct inferior *inf;
- struct thread_info *thread;
struct thread_info *selected = NULL;
struct thread_info *lowest_stopped = NULL;
struct thread_info *first = NULL;
ptid_t event_ptid;
struct target_waitstatus ws;
int ignore_event = 0;
- struct thread_info *thread;
memset (&ws, 0, sizeof (ws));
event_ptid = target_wait (waiton_ptid, &ws, TARGET_WNOHANG);
if (ignore_event)
continue;
- thread = find_thread_ptid (event_ptid);
+ thread_info *evthread = find_thread_ptid (this, event_ptid);
if (ws.kind == TARGET_WAITKIND_STOPPED)
{
instead of signal 0. Suppress it. */
if (sig == GDB_SIGNAL_TRAP)
sig = GDB_SIGNAL_0;
- thread->suspend.stop_signal = sig;
+ evthread->suspend.stop_signal = sig;
ws.value.sig = sig;
}
- thread->suspend.waitstatus = ws;
+ evthread->suspend.waitstatus = ws;
if (ws.kind != TARGET_WAITKIND_STOPPED
|| ws.value.sig != GDB_SIGNAL_0)
- thread->suspend.waitstatus_pending_p = 1;
+ evthread->suspend.waitstatus_pending_p = 1;
- set_executing (event_ptid, 0);
- set_running (event_ptid, 0);
- get_remote_thread_info (thread)->vcont_resumed = 0;
+ set_executing (this, event_ptid, false);
+ set_running (this, event_ptid, false);
+ get_remote_thread_info (evthread)->vcont_resumed = 0;
}
/* "Notice" the new inferiors before anything related to
registers/memory. */
- ALL_INFERIORS (inf)
+ for (inferior *inf : all_non_exited_inferiors (this))
{
- if (inf->pid == 0)
- continue;
-
inf->needs_setup = 1;
if (non_stop)
{
- thread = any_live_thread_of_inferior (inf);
+ thread_info *thread = any_live_thread_of_inferior (inf);
notice_new_inferior (thread, thread->state == THREAD_RUNNING,
from_tty);
}
/* If all threads of an inferior were already stopped, we
haven't setup the inferior yet. */
- ALL_INFERIORS (inf)
+ for (inferior *inf : all_non_exited_inferiors (this))
{
- if (inf->pid == 0)
- continue;
-
if (inf->needs_setup)
{
- thread = any_live_thread_of_inferior (inf);
+ thread_info *thread = any_live_thread_of_inferior (inf);
switch_to_thread_no_regs (thread);
setup_inferior (0);
}
/* Now go over all threads that are stopped, and print their current
frame. If all-stop, then if there's a signalled thread, pick
that as current. */
- ALL_NON_EXITED_THREADS (thread)
+ for (thread_info *thread : all_non_exited_threads (this))
{
if (first == NULL)
first = thread;
others with their status pending. */
if (!non_stop)
{
- thread = selected;
+ thread_info *thread = selected;
if (thread == NULL)
thread = lowest_stopped;
if (thread == NULL)
}
/* For "info program". */
- thread = inferior_thread ();
+ thread_info *thread = inferior_thread ();
if (thread->state == THREAD_STOPPED)
- set_last_target_status (inferior_ptid, thread->suspend.waitstatus);
+ set_last_target_status (this, inferior_ptid, thread->suspend.waitstatus);
}
/* Start the remote connection and sync state. */
const char v_mustreplyempty[] = "vMustReplyEmpty";
putpkt (v_mustreplyempty);
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") == 0)
+ getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") == 0)
remote_protocol_packets[PACKET_vFile_setfs].support = PACKET_DISABLE;
- else if (strcmp (rs->buf, "") != 0)
+ else if (strcmp (rs->buf.data (), "") != 0)
error (_("Remote replied unexpectedly to '%s': %s"), v_mustreplyempty,
- rs->buf);
+ rs->buf.data ());
}
/* Next, we possibly activate noack mode.
if (packet_config_support (noack_config) != PACKET_DISABLE)
{
putpkt ("QStartNoAckMode");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_ok (rs->buf, noack_config) == PACKET_OK)
rs->noack_mode = 1;
}
{
/* Tell the remote that we are using the extended protocol. */
putpkt ("!");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
}
/* Let the target know which signals it is allowed to pass down to
"does not support non-stop"));
putpkt ("QNonStop:1");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Remote refused setting non-stop mode with: %s"), rs->buf);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Remote refused setting non-stop mode with: %s"),
+ rs->buf.data ());
/* Find about threads and processes the stub is already
controlling. We default to adding them in the running state.
/* Don't assume that the stub can operate in all-stop mode.
Request it explicitly. */
putpkt ("QNonStop:0");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Remote refused setting all-stop mode with: %s"), rs->buf);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Remote refused setting all-stop mode with: %s"),
+ rs->buf.data ());
}
/* Upload TSVs regardless of whether the target is running or not. The
/* Check whether the target is running now. */
putpkt ("?");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (!target_is_non_stop_p ())
{
else
{
/* Save the reply for later. */
- wait_status = (char *) alloca (strlen (rs->buf) + 1);
- strcpy (wait_status, rs->buf);
+ wait_status = (char *) alloca (strlen (rs->buf.data ()) + 1);
+ strcpy (wait_status, rs->buf.data ());
}
/* Fetch thread list. */
/* Let the stub know that we want it to return the thread. */
set_continue_thread (minus_one_ptid);
- if (thread_count () == 0)
+ if (thread_count (this) == 0)
{
/* Target has no concept of threads at all. GDB treats
non-threaded target as single-threaded; add a main
says should be current. If we're reconnecting to a
multi-threaded program, this will ideally be the thread
that last reported an event before GDB disconnected. */
- inferior_ptid = get_current_thread (wait_status);
- if (inferior_ptid == null_ptid)
+ ptid_t curr_thread = get_current_thread (wait_status);
+ if (curr_thread == null_ptid)
{
/* Odd... The target was able to list threads, but not
tell us which thread was current (no "thread"
"warning: couldn't determine remote "
"current thread; picking first in list.\n");
- inferior_ptid = thread_list->ptid;
+ for (thread_info *tp : all_non_exited_threads (this,
+ minus_one_ptid))
+ {
+ switch_to_thread (tp);
+ break;
+ }
}
+ else
+ switch_to_thread (find_thread_ptid (this, curr_thread));
}
/* init_wait_for_inferior should be called before get_offsets in order
/* Use the previously fetched status. */
gdb_assert (wait_status != NULL);
- strcpy (rs->buf, wait_status);
+ strcpy (rs->buf.data (), wait_status);
rs->cached_wait_status = 1;
::start_remote (from_tty); /* Initialize gdb process mechanisms. */
reply. In the latter case, there may be more than one thread
stopped --- we pull them all out using the vStopped
mechanism. */
- if (strcmp (rs->buf, "OK") != 0)
+ if (strcmp (rs->buf.data (), "OK") != 0)
{
struct notif_client *notif = ¬if_client_stop;
/* remote_notif_get_pending_replies acks this one, and gets
the rest out. */
rs->notif_state->pending_event[notif_client_stop.id]
- = remote_notif_parse (this, notif, rs->buf);
+ = remote_notif_parse (this, notif, rs->buf.data ());
remote_notif_get_pending_events (notif);
}
- if (thread_count () == 0)
+ if (thread_count (this) == 0)
{
if (!extended_p)
error (_("The target is not running (try extended-remote?)"));
gdb_assert (wait_status == NULL);
/* Report all signals during attach/startup. */
- pass_signals (0, NULL);
+ pass_signals ({});
/* If there are already stopped threads, mark them stopped and
report their stops before giving the prompt to the user. */
}
/* If we connected to a live target, do some additional setup. */
- if (target_has_execution)
+ if (target_has_execution ())
{
if (symfile_objfile) /* No use without a symbol-file. */
remote_check_symbols ();
insert_breakpoints ();
}
+const char *
+remote_target::connection_string ()
+{
+ remote_state *rs = get_remote_state ();
+
+ if (rs->remote_desc->name != NULL)
+ return rs->remote_desc->name;
+ else
+ return NULL;
+}
+
/* Open a connection to a remote debugger.
NAME is the filename used for communication. */
void
remote_target::remote_check_symbols ()
{
- char *msg, *reply, *tmp;
+ char *tmp;
int end;
- long reply_size;
- struct cleanup *old_chain;
/* The remote side has no concept of inferiors that aren't running
yet, it only knows about running processes. If we're connected
but our current inferior is not running, we should not invite the
remote target to request symbol lookups related to its
(unrelated) current process. */
- if (!target_has_execution)
+ if (!target_has_execution ())
return;
if (packet_support (PACKET_qSymbol) == PACKET_DISABLE)
/* Allocate a message buffer. We can't reuse the input buffer in RS,
because we need both at the same time. */
- msg = (char *) xmalloc (get_remote_packet_size ());
- old_chain = make_cleanup (xfree, msg);
- reply = (char *) xmalloc (get_remote_packet_size ());
- make_cleanup (free_current_contents, &reply);
- reply_size = get_remote_packet_size ();
+ gdb::char_vector msg (get_remote_packet_size ());
+ gdb::char_vector reply (get_remote_packet_size ());
/* Invite target to request symbol lookups. */
putpkt ("qSymbol::");
- getpkt (&reply, &reply_size, 0);
+ getpkt (&reply, 0);
packet_ok (reply, &remote_protocol_packets[PACKET_qSymbol]);
- while (startswith (reply, "qSymbol:"))
+ while (startswith (reply.data (), "qSymbol:"))
{
struct bound_minimal_symbol sym;
tmp = &reply[8];
- end = hex2bin (tmp, (gdb_byte *) msg, strlen (tmp) / 2);
+ end = hex2bin (tmp, reinterpret_cast <gdb_byte *> (msg.data ()),
+ strlen (tmp) / 2);
msg[end] = '\0';
- sym = lookup_minimal_symbol (msg, NULL, NULL);
+ sym = lookup_minimal_symbol (msg.data (), NULL, NULL);
if (sym.minsym == NULL)
- xsnprintf (msg, get_remote_packet_size (), "qSymbol::%s", &reply[8]);
+ xsnprintf (msg.data (), get_remote_packet_size (), "qSymbol::%s",
+ &reply[8]);
else
{
int addr_size = gdbarch_addr_bit (target_gdbarch ()) / 8;
sym_addr,
current_top_target ());
- xsnprintf (msg, get_remote_packet_size (), "qSymbol:%s:%s",
+ xsnprintf (msg.data (), get_remote_packet_size (), "qSymbol:%s:%s",
phex_nz (sym_addr, addr_size), &reply[8]);
}
-
- putpkt (msg);
- getpkt (&reply, &reply_size, 0);
- }
- do_cleanups (old_chain);
+ putpkt (msg.data ());
+ getpkt (&reply, 0);
+ }
}
static struct serial *
{
struct remote_state *rs = get_remote_state ();
- xsnprintf (rs->buf, get_remote_packet_size (), "QAllow:"
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "QAllow:"
"WriteReg:%x;WriteMem:%x;"
"InsertBreak:%x;InsertTrace:%x;"
"InsertFastTrace:%x;Stop:%x",
may_insert_breakpoints, may_insert_tracepoints,
may_insert_fast_tracepoints, may_stop);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
/* If the target didn't like the packet, warn the user. Do not try
to undo the user's settings, that would just be maddening. */
- if (strcmp (rs->buf, "OK") != 0)
- warning (_("Remote refused setting permissions with: %s"), rs->buf);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ warning (_("Remote refused setting permissions with: %s"),
+ rs->buf.data ());
}
/* This type describes each known response to the qSupported
rs->explicit_packet_size = packet_size;
}
-void
+static void
remote_packet_size (remote_target *remote, const protocol_feature *feature,
enum packet_support support, const char *value)
{
remote_supported_packet, PACKET_augmented_libraries_svr4_read_feature },
{ "qXfer:memory-map:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_memory_map },
- { "qXfer:spu:read", PACKET_DISABLE, remote_supported_packet,
- PACKET_qXfer_spu_read },
- { "qXfer:spu:write", PACKET_DISABLE, remote_supported_packet,
- PACKET_qXfer_spu_write },
{ "qXfer:osdata:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_osdata },
{ "qXfer:threads:read", PACKET_DISABLE, remote_supported_packet,
else
{
char *copy = xstrdup (remote_support_xml + 13);
- char *p = strtok (copy, ",");
+ char *saveptr;
+ char *p = strtok_r (copy, ",", &saveptr);
do
{
return;
}
}
- while ((p = strtok (NULL, ",")) != NULL);
+ while ((p = strtok_r (NULL, ",", &saveptr)) != NULL);
xfree (copy);
remote_support_xml = reconcat (remote_support_xml,
q = "qSupported:" + q;
putpkt (q.c_str ());
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
/* If an error occured, warn, but do not return - just reset the
buffer to empty and go on to disable features. */
if (packet_ok (rs->buf, &remote_protocol_packets[PACKET_qSupported])
== PACKET_ERROR)
{
- warning (_("Remote failure reply: %s"), rs->buf);
+ warning (_("Remote failure reply: %s"), rs->buf.data ());
rs->buf[0] = 0;
}
}
memset (seen, 0, sizeof (seen));
- next = rs->buf;
+ next = rs->buf.data ();
while (*next)
{
enum packet_support is_supported;
buffer size also. We delay this until after parsing the entire
qSupported packet, because this is the same buffer we were
parsing. */
- if (rs->buf_size < rs->explicit_packet_size)
- {
- rs->buf_size = rs->explicit_packet_size;
- rs->buf = (char *) xrealloc (rs->buf, rs->buf_size);
- }
+ if (rs->buf.size () < rs->explicit_packet_size)
+ rs->buf.resize (rs->explicit_packet_size);
/* Handle the defaults for unmentioned features. */
for (i = 0; i < ARRAY_SIZE (remote_protocol_features); i++)
{
if (query (_("The target is not responding to GDB commands.\n"
"Stop debugging it? ")))
- remote_unpush_and_throw ();
+ remote_unpush_and_throw (this);
}
/* If ^C has already been sent once, offer to disconnect. */
else if (!target_terminal::is_ours () && rs->ctrlc_pending_p)
curr_quit_handler_target->remote_serial_quit_handler ();
}
-/* Remove any of the remote.c targets from target stack. Upper targets depend
- on it so remove them first. */
+/* Remove the remote target from the target stack of each inferior
+ that is using it. Upper targets depend on it so remove them
+ first. */
static void
-remote_unpush_target (void)
+remote_unpush_target (remote_target *target)
{
- pop_all_targets_at_and_above (process_stratum);
+ /* We have to unpush the target from all inferiors, even those that
+ aren't running. */
+ scoped_restore_current_inferior restore_current_inferior;
+
+ for (inferior *inf : all_inferiors (target))
+ {
+ switch_to_inferior_no_thread (inf);
+ pop_all_targets_at_and_above (process_stratum);
+ generic_mourn_inferior ();
+ }
}
static void
-remote_unpush_and_throw (void)
+remote_unpush_and_throw (remote_target *target)
{
- remote_unpush_target ();
+ remote_unpush_target (target);
throw_error (TARGET_CLOSE_ERROR, _("Disconnected from target."));
}
/* If we're connected to a running target, target_preopen will kill it.
Ask this question first, before target_preopen has a chance to kill
anything. */
- if (curr_remote != NULL && !have_inferiors ())
+ if (curr_remote != NULL && !target_has_execution ())
{
if (from_tty
&& !query (_("Already connected to a remote target. Disconnect? ")))
}
/* Switch to using the remote target now. */
- push_target (remote);
- /* The target stack owns the target now. */
- target_holder.release ();
+ push_target (std::move (target_holder));
/* Register extra event sources in the event loop. */
rs->remote_async_inferior_event_token
- = create_async_event_handler (remote_async_inferior_event_handler,
- remote);
+ = create_async_event_handler (remote_async_inferior_event_handler, remote,
+ "remote");
rs->notif_state = remote_notif_state_allocate (remote);
/* Reset the target state; these things will be queried either by
/* First delete any symbols previously loaded from shared libraries. */
no_shared_libraries (NULL, 0);
- /* Start afresh. */
- init_thread_list ();
-
/* Start the remote connection. If error() or QUIT, discard this
target (we'd otherwise be in an inconsistent state) and then
propogate the error on up the exception chain. This ensures that
function. See cli-dump.c. */
{
- TRY
+ try
{
remote->start_remote (from_tty, extended_p);
}
- CATCH (ex, RETURN_MASK_ALL)
+ catch (const gdb_exception &ex)
{
/* Pop the partially set up target - unless something else did
already before throwing the exception. */
if (ex.error != TARGET_CLOSE_ERROR)
- remote_unpush_target ();
- throw_exception (ex);
+ remote_unpush_target (remote);
+ throw;
}
- END_CATCH
}
remote_btrace_reset (rs);
set_general_process ();
if (remote_multi_process_p (rs))
- xsnprintf (rs->buf, get_remote_packet_size (), "D;%x", pid);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "D;%x", pid);
else
- strcpy (rs->buf, "D");
+ strcpy (rs->buf.data (), "D");
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (rs->buf[0] == 'O' && rs->buf[1] == 'K')
;
struct remote_state *rs = get_remote_state ();
int is_fork_parent;
- if (!target_has_execution)
+ if (!target_has_execution ())
error (_("No process to detach from."));
target_announce_detach (from_tty);
remote_detach_pid (pid);
/* Exit only if this is the only active inferior. */
- if (from_tty && !rs->extended && number_of_live_inferiors () == 1)
+ if (from_tty && !rs->extended && number_of_live_inferiors (this) == 1)
puts_filtered (_("Ending remote debugging.\n"));
- struct thread_info *tp = find_thread_ptid (inferior_ptid);
+ thread_info *tp = find_thread_ptid (this, inferior_ptid);
/* Check to see if we are detaching a fork parent. Note that if we
are detaching a fork child, tp == NULL. */
}
else
{
- inferior_ptid = null_ptid;
+ switch_to_no_thread ();
detach_inferior (current_inferior ());
}
}
it is named remote_follow_fork in anticipation of using it for the
remote target as well. */
-int
-remote_target::follow_fork (int follow_child, int detach_fork)
+bool
+remote_target::follow_fork (bool follow_child, bool detach_fork)
{
struct remote_state *rs = get_remote_state ();
enum target_waitkind kind = inferior_thread ()->pending_follow.kind;
remote_detach_pid (child_pid);
}
}
- return 0;
+
+ return false;
}
/* Target follow-exec function for remote targets. Save EXECD_PATHNAME
follow-exec-mode is "new". */
void
-remote_target::follow_exec (struct inferior *inf, char *execd_pathname)
+remote_target::follow_exec (struct inferior *inf, const char *execd_pathname)
{
/* We know that this is a target file name, so if it has the "target:"
prefix we strip it off before saving it in the program space. */
error (_("Argument given to \"disconnect\" when remotely debugging."));
/* Make sure we unpush even the extended remote targets. Calling
- target_mourn_inferior won't unpush, and remote_mourn won't
- unpush if there is more than one inferior left. */
- unpush_target (this);
- generic_mourn_inferior ();
+ target_mourn_inferior won't unpush, and
+ remote_target::mourn_inferior won't unpush if there is more than
+ one inferior left. */
+ remote_unpush_target (this);
if (from_tty)
puts_filtered ("Ending remote debugging.\n");
if (from_tty)
{
- char *exec_file = get_exec_file (0);
+ const char *exec_file = get_exec_file (0);
if (exec_file)
printf_unfiltered (_("Attaching to program: %s, %s\n"), exec_file,
- target_pid_to_str (ptid_t (pid)));
+ target_pid_to_str (ptid_t (pid)).c_str ());
else
printf_unfiltered (_("Attaching to %s\n"),
- target_pid_to_str (ptid_t (pid)));
-
- gdb_flush (gdb_stdout);
+ target_pid_to_str (ptid_t (pid)).c_str ());
}
- xsnprintf (rs->buf, get_remote_packet_size (), "vAttach;%x", pid);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "vAttach;%x", pid);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf,
&remote_protocol_packets[PACKET_vAttach]))
if (!target_is_non_stop_p ())
{
/* Save the reply for later. */
- wait_status = (char *) alloca (strlen (rs->buf) + 1);
- strcpy (wait_status, rs->buf);
+ wait_status = (char *) alloca (strlen (rs->buf.data ()) + 1);
+ strcpy (wait_status, rs->buf.data ());
}
- else if (strcmp (rs->buf, "OK") != 0)
+ else if (strcmp (rs->buf.data (), "OK") != 0)
error (_("Attaching to %s failed with: %s"),
- target_pid_to_str (ptid_t (pid)),
- rs->buf);
+ target_pid_to_str (ptid_t (pid)).c_str (),
+ rs->buf.data ());
break;
case PACKET_UNKNOWN:
error (_("This target does not support attaching to a process"));
default:
error (_("Attaching to %s failed"),
- target_pid_to_str (ptid_t (pid)));
+ target_pid_to_str (ptid_t (pid)).c_str ());
}
- set_current_inferior (remote_add_inferior (0, pid, 1, 0));
+ switch_to_inferior_no_thread (remote_add_inferior (false, pid, 1, 0));
inferior_ptid = ptid_t (pid);
if (target_is_non_stop_p ())
{
- struct thread_info *thread;
-
/* Get list of threads. */
update_thread_list ();
- thread = first_thread_of_inferior (current_inferior ());
- if (thread)
- inferior_ptid = thread->ptid;
- else
- inferior_ptid = ptid_t (pid);
+ thread_info *thread = first_thread_of_inferior (current_inferior ());
+ if (thread != nullptr)
+ switch_to_thread (thread);
/* Invalidate our notion of the remote current thread. */
record_currthread (rs, minus_one_ptid);
}
else
{
- /* Now, if we have thread information, update inferior_ptid. */
- inferior_ptid = remote_current_thread (inferior_ptid);
+ /* Now, if we have thread information, update the main thread's
+ ptid. */
+ ptid_t curr_ptid = remote_current_thread (ptid_t (pid));
/* Add the main thread to the thread list. */
- thread_info *thr = add_thread_silent (inferior_ptid);
+ thread_info *thr = add_thread_silent (this, curr_ptid);
+
+ switch_to_thread (thr);
+
/* Don't consider the thread stopped until we've processed the
saved stop reply. */
- set_executing (thr->ptid, true);
+ set_executing (this, thr->ptid, true);
}
/* Next, if the target can specify a description, read it. We do
else
{
gdb_assert (wait_status != NULL);
- strcpy (rs->buf, wait_status);
+ strcpy (rs->buf.data (), wait_status);
rs->cached_wait_status = 1;
}
}
remote_state *rs = get_remote_state ();
char *buf;
- strcpy (rs->buf, "vCont?");
+ strcpy (rs->buf.data (), "vCont?");
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
- buf = rs->buf;
+ getpkt (&rs->buf, 0);
+ buf = rs->buf.data ();
/* Make sure that the features we assume are supported. */
if (startswith (buf, "vCont"))
buf[0] = 0;
}
- packet_ok (buf, &remote_protocol_packets[PACKET_vCont]);
+ packet_ok (rs->buf, &remote_protocol_packets[PACKET_vCont]);
+ rs->supports_vCont_probed = true;
}
/* Helper function for building "vCont" resumptions. Write a
{
/* If we don't know about the target thread's tid, then
we're resuming magic_null_ptid (see caller). */
- tp = find_thread_ptid (magic_null_ptid);
+ tp = find_thread_ptid (this, magic_null_ptid);
}
else
- tp = find_thread_ptid (ptid);
+ tp = find_thread_ptid (this, ptid);
gdb_assert (tp != NULL);
if (tp->control.may_range_step)
remote_target::append_pending_thread_resumptions (char *p, char *endp,
ptid_t ptid)
{
- struct thread_info *thread;
-
- ALL_NON_EXITED_THREADS (thread)
- if (thread->ptid.matches (ptid)
- && inferior_ptid != thread->ptid
+ for (thread_info *thread : all_non_exited_threads (this, ptid))
+ if (inferior_ptid != thread->ptid
&& thread->suspend.stop_signal != GDB_SIGNAL_0)
{
p = append_resumption (p, endp, thread->ptid,
gdb_signal siggnal)
{
struct remote_state *rs = get_remote_state ();
- struct thread_info *thread;
char *buf;
rs->last_sent_signal = siggnal;
else
set_continue_thread (ptid);
- ALL_NON_EXITED_THREADS (thread)
+ for (thread_info *thread : all_non_exited_threads (this))
resume_clear_thread_private_info (thread);
- buf = rs->buf;
+ buf = rs->buf.data ();
if (::execution_direction == EXEC_REVERSE)
{
/* We don't pass signals to the target in reverse exec mode. */
if (packet_support (PACKET_vCont) == PACKET_DISABLE)
return 0;
- p = rs->buf;
- endp = rs->buf + get_remote_packet_size ();
+ p = rs->buf.data ();
+ endp = p + get_remote_packet_size ();
/* If we could generate a wider range of packets, we'd have to worry
about overflowing BUF. Should there be a generic
append_resumption (p, endp, ptid, step, siggnal);
}
- gdb_assert (strlen (rs->buf) < get_remote_packet_size ());
+ gdb_assert (strlen (rs->buf.data ()) < get_remote_packet_size ());
putpkt (rs->buf);
if (target_is_non_stop_p ())
/* In non-stop, the stub replies to vCont with "OK". The stop
reply will be reported asynchronously by means of a `%Stop'
notification. */
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Unexpected vCont reply in non-stop mode: %s"), rs->buf);
+ getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Unexpected vCont reply in non-stop mode: %s"),
+ rs->buf.data ());
}
return 1;
remote_thread_info *remote_thr;
if (minus_one_ptid == ptid || ptid.is_pid ())
- remote_thr = get_remote_thread_info (inferior_ptid);
+ remote_thr = get_remote_thread_info (this, inferior_ptid);
else
- remote_thr = get_remote_thread_info (ptid);
+ remote_thr = get_remote_thread_info (this, ptid);
remote_thr->last_resume_step = step;
remote_thr->last_resume_sig = siggnal;
{
struct remote_state *rs = m_remote->get_remote_state ();
- m_p = rs->buf;
- m_endp = rs->buf + m_remote->get_remote_packet_size ();
+ m_p = rs->buf.data ();
+ m_endp = m_p + m_remote->get_remote_packet_size ();
m_p += xsnprintf (m_p, m_endp - m_p, "vCont");
m_first_action = m_p;
}
rs = m_remote->get_remote_state ();
m_remote->putpkt (rs->buf);
- m_remote->getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Unexpected vCont reply in non-stop mode: %s"), rs->buf);
+ m_remote->getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Unexpected vCont reply in non-stop mode: %s"), rs->buf.data ());
}
/* The largest action is range-stepping, with its two addresses. This
void
remote_target::commit_resume ()
{
- struct inferior *inf;
- struct thread_info *tp;
int any_process_wildcard;
int may_global_wildcard_vcont;
may_global_wildcard_vcont = 1;
/* And assume every process is individually wildcard-able too. */
- ALL_NON_EXITED_INFERIORS (inf)
+ for (inferior *inf : all_non_exited_inferiors (this))
{
remote_inferior *priv = get_remote_inferior (inf);
disable process and global wildcard resumes appropriately. */
check_pending_events_prevent_wildcard_vcont (&may_global_wildcard_vcont);
- ALL_NON_EXITED_THREADS (tp)
+ for (thread_info *tp : all_non_exited_threads (this))
{
/* If a thread of a process is not meant to be resumed, then we
can't wildcard that process. */
struct vcont_builder vcont_builder (this);
/* Threads first. */
- ALL_NON_EXITED_THREADS (tp)
+ for (thread_info *tp : all_non_exited_threads (this))
{
remote_thread_info *remote_thr = get_remote_thread_info (tp);
supposed to be resumed. */
any_process_wildcard = 0;
- ALL_NON_EXITED_INFERIORS (inf)
+ for (inferior *inf : all_non_exited_inferiors (this))
{
if (get_remote_inferior (inf)->may_wildcard_vcont)
{
}
else
{
- ALL_NON_EXITED_INFERIORS (inf)
+ for (inferior *inf : all_non_exited_inferiors (this))
{
if (get_remote_inferior (inf)->may_wildcard_vcont)
{
remote_target::remote_stop_ns (ptid_t ptid)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
- char *endp = rs->buf + get_remote_packet_size ();
+ char *p = rs->buf.data ();
+ char *endp = p + get_remote_packet_size ();
- if (packet_support (PACKET_vCont) == PACKET_SUPPORT_UNKNOWN)
+ /* FIXME: This supports_vCont_probed check is a workaround until
+ packet_support is per-connection. */
+ if (packet_support (PACKET_vCont) == PACKET_SUPPORT_UNKNOWN
+ || !rs->supports_vCont_probed)
remote_vcont_probe ();
if (!rs->supports_vCont.t)
/* In non-stop, we get an immediate OK reply. The stop reply will
come in asynchronously by notification. */
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Stopping %s failed: %s"), target_pid_to_str (ptid), rs->buf);
+ getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Stopping %s failed: %s"), target_pid_to_str (ptid).c_str (),
+ rs->buf.data ());
}
/* All-stop version of target_interrupt. Sends a break or a ^C to
remote_target::remote_interrupt_ns ()
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
- char *endp = rs->buf + get_remote_packet_size ();
+ char *p = rs->buf.data ();
+ char *endp = p + get_remote_packet_size ();
xsnprintf (p, endp - p, "vCtrlC");
/* In non-stop, we get an immediate OK reply. The stop reply will
come in asynchronously by notification. */
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_vCtrlC]))
{
case PACKET_UNKNOWN:
error (_("No support for interrupting the remote target."));
case PACKET_ERROR:
- error (_("Interrupting target failed: %s"), rs->buf);
+ error (_("Interrupting target failed: %s"), rs->buf.data ());
}
}
if (query (_("The target is not responding to interrupt requests.\n"
"Stop debugging it? ")))
{
- remote_unpush_target ();
+ remote_unpush_target (this);
throw_error (TARGET_CLOSE_ERROR, _("Disconnected from target."));
}
}
}
static void
-remote_console_output (char *msg)
+remote_console_output (const char *msg)
{
- char *p;
+ const char *p;
for (p = msg; p[0] && p[1]; p += 2)
{
tb[0] = c;
tb[1] = 0;
- fputs_unfiltered (tb, gdb_stdtarg);
+ gdb_stdtarg->puts (tb);
}
- gdb_flush (gdb_stdtarg);
+ gdb_stdtarg->flush ();
}
-DEF_VEC_O(cached_reg_t);
-
-typedef struct stop_reply
+struct stop_reply : public notif_event
{
- struct notif_event base;
+ ~stop_reply ();
/* The identifier of the thread about this event */
ptid_t ptid;
efficient for those targets that provide critical registers as
part of their normal status mechanism (as another roundtrip to
fetch them is avoided). */
- VEC(cached_reg_t) *regcache;
+ std::vector<cached_reg_t> regcache;
enum target_stop_reason stop_reason;
CORE_ADDR watch_data_address;
int core;
-} *stop_reply_p;
-
-static void
-stop_reply_xfree (struct stop_reply *r)
-{
- notif_event_xfree ((struct notif_event *) r);
-}
+};
/* Return the length of the stop reply queue. */
return rs->stop_reply_queue.size ();
}
-void
+static void
remote_notif_stop_parse (remote_target *remote,
- struct notif_client *self, char *buf,
+ struct notif_client *self, const char *buf,
struct notif_event *event)
{
remote->remote_parse_stop_reply (buf, (struct stop_reply *) event);
static void
remote_notif_stop_ack (remote_target *remote,
- struct notif_client *self, char *buf,
+ struct notif_client *self, const char *buf,
struct notif_event *event)
{
struct stop_reply *stop_reply = (struct stop_reply *) event;
return 0;
}
-static void
-stop_reply_dtr (struct notif_event *event)
+stop_reply::~stop_reply ()
{
- struct stop_reply *r = (struct stop_reply *) event;
- cached_reg_t *reg;
- int ix;
-
- for (ix = 0;
- VEC_iterate (cached_reg_t, r->regcache, ix, reg);
- ix++)
- xfree (reg->data);
-
- VEC_free (cached_reg_t, r->regcache);
+ for (cached_reg_t ® : regcache)
+ xfree (reg.data);
}
-static struct notif_event *
-remote_notif_stop_alloc_reply (void)
+static notif_event_up
+remote_notif_stop_alloc_reply ()
{
- /* We cast to a pointer to the "base class". */
- struct notif_event *r = (struct notif_event *) XNEW (struct stop_reply);
-
- r->dtr = stop_reply_dtr;
-
- return r;
+ return notif_event_up (new struct stop_reply ());
}
/* A client of notification Stop. */
void
remote_target::remove_new_fork_children (threads_listing_context *context)
{
- struct thread_info * thread;
int pid = -1;
struct notif_client *notif = ¬if_client_stop;
/* For any threads stopped at a fork event, remove the corresponding
fork child threads from the CONTEXT list. */
- ALL_NON_EXITED_THREADS (thread)
+ for (thread_info *thread : all_non_exited_threads (this))
{
struct target_waitstatus *ws = thread_pending_fork_status (thread);
|| event->ws.kind == TARGET_WAITKIND_VFORKED)
*may_global_wildcard = 0;
- struct inferior *inf = find_inferior_ptid (event->ptid);
+ struct inferior *inf = find_inferior_ptid (this, event->ptid);
/* This may be the first time we heard about this process.
Regardless, we must not do a global wildcard resume, otherwise
/* Discard the in-flight notification. */
if (reply != NULL && reply->ptid.pid () == inf->pid)
{
- stop_reply_xfree (reply);
+ delete reply;
rns->pending_event[notif_client_stop.id] = NULL;
}
if (notif_debug)
fprintf_unfiltered (gdb_stdlog,
"notif: discard queued event: 'Stop' in %s\n",
- target_pid_to_str (ptid));
+ target_pid_to_str (ptid).c_str ());
return result;
}
if (notif_debug)
fprintf_unfiltered (gdb_stdlog,
"notif: push 'Stop' %s to queue %d\n",
- target_pid_to_str (new_event->ptid),
+ target_pid_to_str (new_event->ptid).c_str (),
int (rs->stop_reply_queue.size ()));
mark_async_event_handler (rs->remote_async_inferior_event_token);
result is stored in EVENT, or throws an error. */
void
-remote_target::remote_parse_stop_reply (char *buf, stop_reply *event)
+remote_target::remote_parse_stop_reply (const char *buf, stop_reply *event)
{
remote_arch_state *rsa = NULL;
ULONGEST addr;
event->ws.kind = TARGET_WAITKIND_IGNORE;
event->ws.value.integer = 0;
event->stop_reason = TARGET_STOPPED_BY_NO_REASON;
- event->regcache = NULL;
+ event->regcache.clear ();
event->core = -1;
switch (buf[0])
else if (strprefix (p, p1, "exec"))
{
ULONGEST ignored;
- char pathname[PATH_MAX];
int pathlen;
/* Determine the length of the execd pathname. */
/* Save the pathname for event reporting and for
the next run command. */
- hex2bin (p1, (gdb_byte *) pathname, pathlen);
+ gdb::unique_xmalloc_ptr<char[]> pathname
+ ((char *) xmalloc (pathlen + 1));
+ hex2bin (p1, (gdb_byte *) pathname.get (), pathlen);
pathname[pathlen] = '\0';
/* This is freed during event handling. */
- event->ws.value.execd_pathname = xstrdup (pathname);
+ event->ws.value.execd_pathname = pathname.release ();
event->ws.kind = TARGET_WAITKIND_EXECD;
/* Skip the registers included in this packet, since
reported expedited registers. */
if (event->ptid == null_ptid)
{
+ /* If there is no thread-id information then leave
+ the event->ptid as null_ptid. Later in
+ process_stop_reply we will pick a suitable
+ thread. */
const char *thr = strstr (p1 + 1, ";thread:");
if (thr != NULL)
event->ptid = read_ptid (thr + strlen (";thread:"),
NULL);
- else
- {
- /* Either the current thread hasn't changed,
- or the inferior is not multi-threaded.
- The event must be for the thread we last
- set as (or learned as being) current. */
- event->ptid = event->rs->general_thread;
- }
}
if (rsa == NULL)
{
- inferior *inf = (event->ptid == null_ptid
- ? NULL
- : find_inferior_ptid (event->ptid));
+ inferior *inf
+ = (event->ptid == null_ptid
+ ? NULL
+ : find_inferior_ptid (this, event->ptid));
/* If this is the first time we learn anything
about this process, skip the registers
included in this packet, since we don't yet
if (fieldsize < register_size (event->arch, reg->regnum))
warning (_("Remote reply is too short: %s"), buf);
- VEC_safe_push (cached_reg_t, event->regcache, &cached_reg);
+ event->regcache.push_back (cached_reg);
}
else
{
break;
case 'w': /* Thread exited. */
{
- const char *p;
ULONGEST value;
event->ws.kind = TARGET_WAITKIND_THREAD_EXITED;
case 'W': /* Target exited. */
case 'X':
{
- const char *p;
- int pid;
ULONGEST value;
/* GDB used to accept only 2 hex chars here. Stubs should
event->ws.value.sig = GDB_SIGNAL_UNKNOWN;
}
- /* If no process is specified, assume inferior_ptid. */
- pid = inferior_ptid.pid ();
+ /* If no process is specified, return null_ptid, and let the
+ caller figure out the right process to use. */
+ int pid = 0;
if (*p == '\0')
;
else if (*p == ';')
event->ptid = minus_one_ptid;
break;
}
-
- if (target_is_non_stop_p () && event->ptid == null_ptid)
- error (_("No process or thread specified in stop reply: %s"), buf);
}
/* When the stub wants to tell GDB about a new notification reply, it
<GDB marks the REMOTE_ASYNC_GET_PENDING_EVENTS_TOKEN>
2.5) <-- (registers reply to step #2.3)
- Eventualy after step #2.5, we return to the event loop, which
+ Eventually after step #2.5, we return to the event loop, which
notices there's an event on the
REMOTE_ASYNC_GET_PENDING_EVENTS_TOKEN event and calls the
associated callback --- the function below. At this point, we're
nc->name);
/* acknowledge */
- nc->ack (this, nc, rs->buf, rs->notif_state->pending_event[nc->id]);
+ nc->ack (this, nc, rs->buf.data (),
+ rs->notif_state->pending_event[nc->id]);
rs->notif_state->pending_event[nc->id] = NULL;
while (1)
{
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") == 0)
+ getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") == 0)
break;
else
- remote_notif_ack (this, nc, rs->buf);
+ remote_notif_ack (this, nc, rs->buf.data ());
}
}
else
*status = stop_reply->ws;
ptid = stop_reply->ptid;
- /* If no thread/process was reported by the stub, assume the current
- inferior. */
+ /* If no thread/process was reported by the stub then use the first
+ non-exited thread in the current target. */
if (ptid == null_ptid)
- ptid = inferior_ptid;
+ {
+ /* Some stop events apply to all threads in an inferior, while others
+ only apply to a single thread. */
+ bool is_stop_for_all_threads
+ = (status->kind == TARGET_WAITKIND_EXITED
+ || status->kind == TARGET_WAITKIND_SIGNALLED);
+
+ for (thread_info *thr : all_non_exited_threads (this))
+ {
+ if (ptid != null_ptid
+ && (!is_stop_for_all_threads
+ || ptid.pid () != thr->ptid.pid ()))
+ {
+ static bool warned = false;
+
+ if (!warned)
+ {
+ /* If you are seeing this warning then the remote target
+ has stopped without specifying a thread-id, but the
+ target does have multiple threads (or inferiors), and
+ so GDB is having to guess which thread stopped.
+
+ Examples of what might cause this are the target
+ sending and 'S' stop packet, or a 'T' stop packet and
+ not including a thread-id.
+
+ Additionally, the target might send a 'W' or 'X
+ packet without including a process-id, when the target
+ has multiple running inferiors. */
+ if (is_stop_for_all_threads)
+ warning (_("multi-inferior target stopped without "
+ "sending a process-id, using first "
+ "non-exited inferior"));
+ else
+ warning (_("multi-threaded target stopped without "
+ "sending a thread-id, using first "
+ "non-exited thread"));
+ warned = true;
+ }
+ break;
+ }
+
+ /* If this is a stop for all threads then don't use a particular
+ threads ptid, instead create a new ptid where only the pid
+ field is set. */
+ if (is_stop_for_all_threads)
+ ptid = ptid_t (thr->ptid.pid ());
+ else
+ ptid = thr->ptid;
+ }
+ gdb_assert (ptid != null_ptid);
+ }
if (status->kind != TARGET_WAITKIND_EXITED
&& status->kind != TARGET_WAITKIND_SIGNALLED
&& status->kind != TARGET_WAITKIND_NO_RESUMED)
{
/* Expedited registers. */
- if (stop_reply->regcache)
+ if (!stop_reply->regcache.empty ())
{
struct regcache *regcache
- = get_thread_arch_regcache (ptid, stop_reply->arch);
- cached_reg_t *reg;
- int ix;
+ = get_thread_arch_regcache (this, ptid, stop_reply->arch);
- for (ix = 0;
- VEC_iterate (cached_reg_t, stop_reply->regcache, ix, reg);
- ix++)
- {
- regcache->raw_supply (reg->num, reg->data);
- xfree (reg->data);
- }
+ for (cached_reg_t ® : stop_reply->regcache)
+ {
+ regcache->raw_supply (reg.num, reg.data);
+ xfree (reg.data);
+ }
- VEC_free (cached_reg_t, stop_reply->regcache);
+ stop_reply->regcache.clear ();
}
remote_notice_new_inferior (ptid, 0);
- remote_thread_info *remote_thr = get_remote_thread_info (ptid);
+ remote_thread_info *remote_thr = get_remote_thread_info (this, ptid);
remote_thr->core = stop_reply->core;
remote_thr->stop_reason = stop_reply->stop_reason;
remote_thr->watch_data_address = stop_reply->watch_data_address;
remote_thr->vcont_resumed = 0;
}
- stop_reply_xfree (stop_reply);
+ delete stop_reply;
return ptid;
}
/* The non-stop mode version of target_wait. */
ptid_t
-remote_target::wait_ns (ptid_t ptid, struct target_waitstatus *status, int options)
+remote_target::wait_ns (ptid_t ptid, struct target_waitstatus *status,
+ target_wait_flags options)
{
struct remote_state *rs = get_remote_state ();
struct stop_reply *stop_reply;
/* If in non-stop mode, get out of getpkt even if a
notification is received. */
- ret = getpkt_or_notif_sane (&rs->buf, &rs->buf_size,
- 0 /* forever */, &is_notif);
+ ret = getpkt_or_notif_sane (&rs->buf, 0 /* forever */, &is_notif);
while (1)
{
if (ret != -1 && !is_notif)
/* We're out of sync with the target now. Did it continue
or not? We can't tell which thread it was in non-stop,
so just ignore this. */
- warning (_("Remote failure reply: %s"), rs->buf);
+ warning (_("Remote failure reply: %s"), rs->buf.data ());
break;
case 'O': /* Console output. */
- remote_console_output (rs->buf + 1);
+ remote_console_output (&rs->buf[1]);
break;
default:
- warning (_("Invalid remote reply: %s"), rs->buf);
+ warning (_("Invalid remote reply: %s"), rs->buf.data ());
break;
}
}
/* Otherwise do a blocking wait. */
- ret = getpkt_or_notif_sane (&rs->buf, &rs->buf_size,
- 1 /* forever */, &is_notif);
+ ret = getpkt_or_notif_sane (&rs->buf, 1 /* forever */, &is_notif);
}
}
+/* Return the first resumed thread. */
+
+static ptid_t
+first_remote_resumed_thread (remote_target *target)
+{
+ for (thread_info *tp : all_non_exited_threads (target, minus_one_ptid))
+ if (tp->resumed)
+ return tp->ptid;
+ return null_ptid;
+}
+
/* Wait until the remote machine stops, then return, storing status in
STATUS just as `wait' would. */
ptid_t
-remote_target::wait_as (ptid_t ptid, target_waitstatus *status, int options)
+remote_target::wait_as (ptid_t ptid, target_waitstatus *status,
+ target_wait_flags options)
{
struct remote_state *rs = get_remote_state ();
ptid_t event_ptid = null_ptid;
_never_ wait for ever -> test on target_is_async_p().
However, before we do that we need to ensure that the caller
knows how to take the target into/out of async mode. */
- ret = getpkt_or_notif_sane (&rs->buf, &rs->buf_size,
- forever, &is_notif);
+ ret = getpkt_or_notif_sane (&rs->buf, forever, &is_notif);
/* GDB gets a notification. Return to core as this event is
not interesting. */
return minus_one_ptid;
}
- buf = rs->buf;
+ buf = rs->buf.data ();
/* Assume that the target has acknowledged Ctrl-C unless we receive
an 'F' or 'O' packet. */
break;
case 'N': case 'T': case 'S': case 'X': case 'W':
{
- struct stop_reply *stop_reply;
-
/* There is a stop reply to handle. */
rs->waiting_for_stop_reply = 0;
stop_reply
= (struct stop_reply *) remote_notif_parse (this,
¬if_client_stop,
- rs->buf);
+ rs->buf.data ());
event_ptid = process_stop_reply (stop_reply, status);
break;
if (event_ptid != null_ptid)
record_currthread (rs, event_ptid);
else
- event_ptid = inferior_ptid;
+ event_ptid = first_remote_resumed_thread (this);
}
else
- /* A process exit. Invalidate our notion of current thread. */
- record_currthread (rs, minus_one_ptid);
+ {
+ /* A process exit. Invalidate our notion of current thread. */
+ record_currthread (rs, minus_one_ptid);
+ /* It's possible that the packet did not include a pid. */
+ if (event_ptid == null_ptid)
+ event_ptid = first_remote_resumed_thread (this);
+ /* EVENT_PTID could still be NULL_PTID. Double-check. */
+ if (event_ptid == null_ptid)
+ event_ptid = magic_null_ptid;
+ }
return event_ptid;
}
STATUS just as `wait' would. */
ptid_t
-remote_target::wait (ptid_t ptid, struct target_waitstatus *status, int options)
+remote_target::wait (ptid_t ptid, struct target_waitstatus *status,
+ target_wait_flags options)
{
ptid_t event_ptid;
if (reg->pnum == -1)
return 0;
- p = rs->buf;
+ p = rs->buf.data ();
*p++ = 'p';
p += hexnumstr (p, reg->pnum);
*p++ = '\0';
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
- buf = rs->buf;
+ buf = rs->buf.data ();
- switch (packet_ok (buf, &remote_protocol_packets[PACKET_p]))
+ switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_p]))
{
case PACKET_OK:
break;
struct remote_state *rs = get_remote_state ();
int buf_len;
- xsnprintf (rs->buf, get_remote_packet_size (), "g");
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "g");
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_check_result (rs->buf) == PACKET_ERROR)
error (_("Could not read registers; remote failure reply '%s'"),
- rs->buf);
+ rs->buf.data ());
/* We can get out of synch in various cases. If the first character
in the buffer is not a hex character, assume that has happened
if (remote_debug)
fprintf_unfiltered (gdb_stdlog,
"Bad register packet; fetching a new packet\n");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
}
- buf_len = strlen (rs->buf);
+ buf_len = strlen (rs->buf.data ());
/* Sanity check the received packet. */
if (buf_len % 2 != 0)
- error (_("Remote 'g' packet reply is of odd length: %s"), rs->buf);
+ error (_("Remote 'g' packet reply is of odd length: %s"), rs->buf.data ());
return buf_len / 2;
}
char *p;
char *regs;
- buf_len = strlen (rs->buf);
+ buf_len = strlen (rs->buf.data ());
/* Further sanity checks, with knowledge of the architecture. */
if (buf_len > 2 * rsa->sizeof_g_packet)
error (_("Remote 'g' packet reply is too long (expected %ld bytes, got %d "
- "bytes): %s"), rsa->sizeof_g_packet, buf_len / 2, rs->buf);
+ "bytes): %s"),
+ rsa->sizeof_g_packet, buf_len / 2,
+ rs->buf.data ());
/* Save the size of the packet sent to us by the target. It is used
as a heuristic when determining the max size of packets that the
hex characters. Suck them all up, then supply them to the
register cacheing/storage mechanism. */
- p = rs->buf;
+ p = rs->buf.data ();
for (i = 0; i < rsa->sizeof_g_packet; i++)
{
if (p[0] == 0 || p[1] == 0)
if (r->in_g_packet)
{
- if ((r->offset + reg_size) * 2 > strlen (rs->buf))
+ if ((r->offset + reg_size) * 2 > strlen (rs->buf.data ()))
/* This shouldn't happen - we adjusted in_g_packet above. */
internal_error (__FILE__, __LINE__,
_("unexpected end of 'g' packet reply"));
else if (rs->buf[r->offset * 2] == 'x')
{
- gdb_assert (r->offset * 2 < strlen (rs->buf));
+ gdb_assert (r->offset * 2 < strlen (rs->buf.data ()));
/* The register isn't available, mark it as such (at
the same time setting the value to zero). */
regcache->raw_supply (r->regnum, NULL);
struct gdbarch *gdbarch = regcache->arch ();
struct remote_state *rs = get_remote_state ();
/* Try storing a single register. */
- char *buf = rs->buf;
+ char *buf = rs->buf.data ();
gdb_byte *regp = (gdb_byte *) alloca (register_size (gdbarch, reg->regnum));
char *p;
regcache->raw_collect (reg->regnum, regp);
bin2hex (regp, p, register_size (gdbarch, reg->regnum));
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_P]))
{
return 1;
case PACKET_ERROR:
error (_("Could not write register \"%s\"; remote failure reply '%s'"),
- gdbarch_register_name (gdbarch, reg->regnum), rs->buf);
+ gdbarch_register_name (gdbarch, reg->regnum), rs->buf.data ());
case PACKET_UNKNOWN:
return 0;
default:
/* Command describes registers byte by byte,
each byte encoded as two hex characters. */
- p = rs->buf;
+ p = rs->buf.data ();
*p++ = 'G';
bin2hex (regs, p, rsa->sizeof_g_packet);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_check_result (rs->buf) == PACKET_ERROR)
error (_("Could not write registers; remote failure reply '%s'"),
- rs->buf);
+ rs->buf.data ());
}
/* Store register REGNUM, or all registers if REGNUM == -1, from the contents
{
char *p;
- p = rs->buf;
+ p = rs->buf.data ();
*p++ = 'X';
p += hexnumstr (p, (ULONGEST) addr);
*p++ = ',';
*p++ = ':';
*p = '\0';
- putpkt_binary (rs->buf, (int) (p - rs->buf));
- getpkt (&rs->buf, &rs->buf_size, 0);
+ putpkt_binary (rs->buf.data (), (int) (p - rs->buf.data ()));
+ getpkt (&rs->buf, 0);
if (rs->buf[0] == '\0')
{
/* Construct the packet excluding the data: "<header><memaddr>,<len>:". */
- strcat (rs->buf, header);
- p = rs->buf + strlen (header);
+ strcat (rs->buf.data (), header);
+ p = rs->buf.data () + strlen (header);
/* Compute a best guess of the number of bytes actually transfered. */
if (packet_format == 'X')
units_written = todo_units;
}
- putpkt_binary (rs->buf, (int) (p - rs->buf));
- getpkt (&rs->buf, &rs->buf_size, 0);
+ putpkt_binary (rs->buf.data (), (int) (p - rs->buf.data ()));
+ getpkt (&rs->buf, 0);
if (rs->buf[0] == 'E')
return TARGET_XFER_E_IO;
/* Construct "m"<memaddr>","<len>". */
memaddr = remote_address_masked (memaddr);
- p = rs->buf;
+ p = rs->buf.data ();
*p++ = 'm';
p += hexnumstr (p, (ULONGEST) memaddr);
*p++ = ',';
p += hexnumstr (p, (ULONGEST) todo_units);
*p = '\0';
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (rs->buf[0] == 'E'
&& isxdigit (rs->buf[1]) && isxdigit (rs->buf[2])
&& rs->buf[3] == '\0')
return TARGET_XFER_E_IO;
/* Reply describes memory byte by byte, each byte encoded as two hex
characters. */
- p = rs->buf;
+ p = rs->buf.data ();
decoded_bytes = hex2bin (p, myaddr, todo_units * unit_size);
/* Return what we have. Let higher layers handle partial reads. */
*xfered_len_units = (ULONGEST) (decoded_bytes / unit_size);
ULONGEST *xfered_len)
{
struct target_section *secp;
- struct target_section_table *table;
secp = target_section_by_addr (this, memaddr);
if (secp != NULL
- && (bfd_get_section_flags (secp->the_bfd_section->owner,
- secp->the_bfd_section)
- & SEC_READONLY))
+ && (bfd_section_flags (secp->the_bfd_section) & SEC_READONLY))
{
- struct target_section *p;
ULONGEST memend = memaddr + len;
- table = target_get_section_table (this);
-
- for (p = table->sections; p < table->sections_end; p++)
+ target_section_table *table = target_get_section_table (this);
+ for (target_section &p : *table)
{
- if (memaddr >= p->addr)
+ if (memaddr >= p.addr)
{
- if (memend <= p->endaddr)
+ if (memend <= p.endaddr)
{
/* Entire transfer is within this section. */
return remote_read_bytes_1 (memaddr, readbuf, len, unit_size,
xfered_len);
}
- else if (memaddr >= p->endaddr)
+ else if (memaddr >= p.endaddr)
{
/* This section ends before the transfer starts. */
continue;
else
{
/* This section overlaps the transfer. Just do half. */
- len = p->endaddr - memaddr;
+ len = p.endaddr - memaddr;
return remote_read_bytes_1 (memaddr, readbuf, len, unit_size,
xfered_len);
}
va_start (ap, format);
rs->buf[0] = '\0';
- if (vsnprintf (rs->buf, max_size, format, ap) >= max_size)
+ int size = vsnprintf (rs->buf.data (), max_size, format, ap);
+
+ va_end (ap);
+
+ if (size >= max_size)
internal_error (__FILE__, __LINE__, _("Too long remote packet."));
if (putpkt (rs->buf) < 0)
error (_("Communication problem with target."));
rs->buf[0] = '\0';
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
return packet_check_result (rs->buf);
}
for output compatibility with throw_perror_with_name. */
static void
-unpush_and_perror (const char *string)
+unpush_and_perror (remote_target *target, const char *string)
{
int saved_errno = errno;
- remote_unpush_target ();
+ remote_unpush_target (target);
throw_error (TARGET_CLOSE_ERROR, "%s: %s.", string,
safe_strerror (saved_errno));
}
switch ((enum serial_rc) ch)
{
case SERIAL_EOF:
- remote_unpush_target ();
+ remote_unpush_target (this);
throw_error (TARGET_CLOSE_ERROR, _("Remote connection closed"));
/* no return */
case SERIAL_ERROR:
- unpush_and_perror (_("Remote communication error. "
- "Target disconnected."));
+ unpush_and_perror (this, _("Remote communication error. "
+ "Target disconnected."));
/* no return */
case SERIAL_TIMEOUT:
break;
if (serial_write (rs->remote_desc, str, len))
{
- unpush_and_perror (_("Remote communication error. "
- "Target disconnected."));
+ unpush_and_perror (this, _("Remote communication error. "
+ "Target disconnected."));
}
if (rs->got_ctrlc_during_io)
*p = '\0';
int len = (int) (p - buf2);
+ int max_chars;
+
+ if (remote_packet_max_chars < 0)
+ max_chars = len;
+ else
+ max_chars = remote_packet_max_chars;
std::string str
- = escape_buffer (buf2, std::min (len, REMOTE_DEBUG_MAX_CHAR));
+ = escape_buffer (buf2, std::min (len, max_chars));
fprintf_unfiltered (gdb_stdlog, "Sending packet: %s", str.c_str ());
- if (len > REMOTE_DEBUG_MAX_CHAR)
+ if (len > max_chars)
fprintf_unfiltered (gdb_stdlog, "[%d bytes omitted]",
- len - REMOTE_DEBUG_MAX_CHAR);
+ len - max_chars);
fprintf_unfiltered (gdb_stdlog, "...");
for an ack. */
/* We've found the start of a notification. Now
collect the data. */
- val = read_frame (&rs->buf, &rs->buf_size);
+ val = read_frame (&rs->buf);
if (val >= 0)
{
if (remote_debug)
{
- std::string str = escape_buffer (rs->buf, val);
+ std::string str = escape_buffer (rs->buf.data (), val);
fprintf_unfiltered (gdb_stdlog,
" Notification received: %s\n",
str.c_str ());
}
- handle_notification (rs->notif_state, rs->buf);
+ handle_notification (rs->notif_state, rs->buf.data ());
/* We're in sync now, rewait for the ack. */
tcount = 0;
}
fprintf_unfiltered (gdb_stdlog, "putpkt: Junk: ");
}
fputc_unfiltered (ch & 0177, gdb_stdlog);
- fprintf_unfiltered (gdb_stdlog, "%s", rs->buf);
+ fprintf_unfiltered (gdb_stdlog, "%s", rs->buf.data ());
}
}
continue;
/* Come here after finding the start of the frame. Collect the rest
into *BUF, verifying the checksum, length, and handling run-length
compression. NUL terminate the buffer. If there is not enough room,
- expand *BUF using xrealloc.
+ expand *BUF.
Returns -1 on error, number of characters in buffer (ignoring the
trailing NULL) on success. (could be extended to return one of the
SERIAL status indications). */
long
-remote_target::read_frame (char **buf_p, long *sizeof_buf)
+remote_target::read_frame (gdb::char_vector *buf_p)
{
unsigned char csum;
long bc;
int c;
- char *buf = *buf_p;
+ char *buf = buf_p->data ();
struct remote_state *rs = get_remote_state ();
csum = 0;
if (repeat > 0 && repeat <= 255 && bc > 0)
{
- if (bc + repeat - 1 >= *sizeof_buf - 1)
+ if (bc + repeat - 1 >= buf_p->size () - 1)
{
/* Make some more room in the buffer. */
- *sizeof_buf += repeat;
- *buf_p = (char *) xrealloc (*buf_p, *sizeof_buf);
- buf = *buf_p;
+ buf_p->resize (buf_p->size () + repeat);
+ buf = buf_p->data ();
}
memset (&buf[bc], buf[bc - 1], repeat);
return -1;
}
default:
- if (bc >= *sizeof_buf - 1)
+ if (bc >= buf_p->size () - 1)
{
/* Make some more room in the buffer. */
- *sizeof_buf *= 2;
- *buf_p = (char *) xrealloc (*buf_p, *sizeof_buf);
- buf = *buf_p;
+ buf_p->resize (buf_p->size () * 2);
+ buf = buf_p->data ();
}
buf[bc++] = c;
}
}
+/* Set this to the maximum number of seconds to wait instead of waiting forever
+ in target_wait(). If this timer times out, then it generates an error and
+ the command is aborted. This replaces most of the need for timeouts in the
+ GDB test suite, and makes it possible to distinguish between a hung target
+ and one with slow communications. */
+
+static int watchdog = 0;
+static void
+show_watchdog (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Watchdog timer is %s.\n"), value);
+}
+
/* Read a packet from the remote machine, with error checking, and
- store it in *BUF. Resize *BUF using xrealloc if necessary to hold
- the result, and update *SIZEOF_BUF. If FOREVER, wait forever
- rather than timing out; this is used (in synchronous mode) to wait
- for a target that is is executing user code to stop. */
+ store it in *BUF. Resize *BUF if necessary to hold the result. If
+ FOREVER, wait forever rather than timing out; this is used (in
+ synchronous mode) to wait for a target that is is executing user
+ code to stop. */
/* FIXME: ezannoni 2000-02-01 this wrapper is necessary so that we
don't have to change all the calls to getpkt to deal with the
return value, because at the moment I don't know what the right
thing to do it for those. */
void
-remote_target::getpkt (char **buf, long *sizeof_buf, int forever)
+remote_target::getpkt (gdb::char_vector *buf, int forever)
{
- getpkt_sane (buf, sizeof_buf, forever);
+ getpkt_sane (buf, forever);
}
/* Read a packet from the remote machine, with error checking, and
- store it in *BUF. Resize *BUF using xrealloc if necessary to hold
- the result, and update *SIZEOF_BUF. If FOREVER, wait forever
- rather than timing out; this is used (in synchronous mode) to wait
- for a target that is is executing user code to stop. If FOREVER ==
- 0, this function is allowed to time out gracefully and return an
- indication of this to the caller. Otherwise return the number of
- bytes read. If EXPECTING_NOTIF, consider receiving a notification
- enough reason to return to the caller. *IS_NOTIF is an output
- boolean that indicates whether *BUF holds a notification or not
- (a regular packet). */
+ store it in *BUF. Resize *BUF if necessary to hold the result. If
+ FOREVER, wait forever rather than timing out; this is used (in
+ synchronous mode) to wait for a target that is is executing user
+ code to stop. If FOREVER == 0, this function is allowed to time
+ out gracefully and return an indication of this to the caller.
+ Otherwise return the number of bytes read. If EXPECTING_NOTIF,
+ consider receiving a notification enough reason to return to the
+ caller. *IS_NOTIF is an output boolean that indicates whether *BUF
+ holds a notification or not (a regular packet). */
int
-remote_target::getpkt_or_notif_sane_1 (char **buf, long *sizeof_buf,
+remote_target::getpkt_or_notif_sane_1 (gdb::char_vector *buf,
int forever, int expecting_notif,
int *is_notif)
{
previously cached response. */
rs->cached_wait_status = 0;
- strcpy (*buf, "timeout");
+ strcpy (buf->data (), "timeout");
if (forever)
timeout = watchdog > 0 ? watchdog : -1;
if (forever) /* Watchdog went off? Kill the target. */
{
- remote_unpush_target ();
+ remote_unpush_target (this);
throw_error (TARGET_CLOSE_ERROR,
_("Watchdog timeout has expired. "
"Target detached."));
{
/* We've found the start of a packet or notification.
Now collect the data. */
- val = read_frame (buf, sizeof_buf);
+ val = read_frame (buf);
if (val >= 0)
break;
}
{
if (remote_debug)
{
+ int max_chars;
+
+ if (remote_packet_max_chars < 0)
+ max_chars = val;
+ else
+ max_chars = remote_packet_max_chars;
+
std::string str
- = escape_buffer (*buf,
- std::min (val, REMOTE_DEBUG_MAX_CHAR));
+ = escape_buffer (buf->data (),
+ std::min (val, max_chars));
fprintf_unfiltered (gdb_stdlog, "Packet received: %s",
str.c_str ());
- if (val > REMOTE_DEBUG_MAX_CHAR)
+ if (val > max_chars)
fprintf_unfiltered (gdb_stdlog, "[%d bytes omitted]",
- val - REMOTE_DEBUG_MAX_CHAR);
+ val - max_chars);
fprintf_unfiltered (gdb_stdlog, "\n");
}
if (remote_debug)
{
- std::string str = escape_buffer (*buf, val);
+ std::string str = escape_buffer (buf->data (), val);
fprintf_unfiltered (gdb_stdlog,
" Notification received: %s\n",
if (is_notif != NULL)
*is_notif = 1;
- handle_notification (rs->notif_state, *buf);
+ handle_notification (rs->notif_state, buf->data ());
/* Notifications require no acknowledgement. */
}
int
-remote_target::getpkt_sane (char **buf, long *sizeof_buf, int forever)
+remote_target::getpkt_sane (gdb::char_vector *buf, int forever)
{
- return getpkt_or_notif_sane_1 (buf, sizeof_buf, forever, 0, NULL);
+ return getpkt_or_notif_sane_1 (buf, forever, 0, NULL);
}
int
-remote_target::getpkt_or_notif_sane (char **buf, long *sizeof_buf, int forever,
+remote_target::getpkt_or_notif_sane (gdb::char_vector *buf, int forever,
int *is_notif)
{
- return getpkt_or_notif_sane_1 (buf, sizeof_buf, forever, 1,
- is_notif);
+ return getpkt_or_notif_sane_1 (buf, forever, 1, is_notif);
}
/* Kill any new fork children of process PID that haven't been
remote_target::kill_new_fork_children (int pid)
{
remote_state *rs = get_remote_state ();
- struct thread_info *thread;
struct notif_client *notif = ¬if_client_stop;
/* Kill the fork child threads of any threads in process PID
that are stopped at a fork event. */
- ALL_NON_EXITED_THREADS (thread)
+ for (thread_info *thread : all_non_exited_threads (this))
{
struct target_waitstatus *ws = &thread->pending_follow;
inferior, then we will tell gdbserver to exit and unpush the
target. */
if (res == -1 && !remote_multi_process_p (rs)
- && number_of_live_inferiors () == 1)
+ && number_of_live_inferiors (this) == 1)
{
remote_kill_k ();
remote_state *rs = get_remote_state ();
/* Tell the remote target to detach. */
- xsnprintf (rs->buf, get_remote_packet_size (), "vKill;%x", pid);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "vKill;%x", pid);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf,
&remote_protocol_packets[PACKET_vKill]))
{
/* Catch errors so the user can quit from gdb even when we
aren't on speaking terms with the remote system. */
- TRY
+ try
{
putpkt ("k");
}
- CATCH (ex, RETURN_MASK_ERROR)
+ catch (const gdb_exception_error &ex)
{
if (ex.error == TARGET_CLOSE_ERROR)
{
/* Otherwise, something went wrong. We didn't actually kill
the target. Just propagate the exception, and let the
user or higher layers decide what to do. */
- throw_exception (ex);
+ throw;
}
- END_CATCH
}
void
discard_pending_stop_replies (current_inferior ());
/* In 'target remote' mode with one inferior, we close the connection. */
- if (!rs->extended && number_of_live_inferiors () <= 1)
+ if (!rs->extended && number_of_live_inferiors (this) <= 1)
{
- unpush_target (this);
-
- /* remote_close takes care of doing most of the clean up. */
- generic_mourn_inferior ();
+ remote_unpush_target (this);
return;
}
/* Call common code to mark the inferior as not running. */
generic_mourn_inferior ();
-
- if (!have_inferiors ())
- {
- if (!remote_multi_process_p (rs))
- {
- /* Check whether the target is running now - some remote stubs
- automatically restart after kill. */
- putpkt ("?");
- getpkt (&rs->buf, &rs->buf_size, 0);
-
- if (rs->buf[0] == 'S' || rs->buf[0] == 'T')
- {
- /* Assume that the target has been restarted. Set
- inferior_ptid so that bits of core GDB realizes
- there's something here, e.g., so that the user can
- say "kill" again. */
- inferior_ptid = magic_null_ptid;
- }
- }
- }
}
bool
struct remote_state *rs = get_remote_state ();
char *reply;
- xsnprintf (rs->buf, get_remote_packet_size (), "QDisableRandomization:%x",
- val);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (),
+ "QDisableRandomization:%x", val);
putpkt (rs->buf);
reply = remote_get_noisy_reply ();
if (*reply == '\0')
if (packet_support (PACKET_vRun) == PACKET_DISABLE)
return -1;
- strcpy (rs->buf, "vRun;");
- len = strlen (rs->buf);
+ strcpy (rs->buf.data (), "vRun;");
+ len = strlen (rs->buf.data ());
if (strlen (remote_exec_file) * 2 + len >= get_remote_packet_size ())
error (_("Remote file name too long for run packet"));
- len += 2 * bin2hex ((gdb_byte *) remote_exec_file, rs->buf + len,
+ len += 2 * bin2hex ((gdb_byte *) remote_exec_file, rs->buf.data () + len,
strlen (remote_exec_file));
if (!args.empty ())
if (strlen (argv[i]) * 2 + 1 + len >= get_remote_packet_size ())
error (_("Argument list too long for run packet"));
rs->buf[len++] = ';';
- len += 2 * bin2hex ((gdb_byte *) argv[i], rs->buf + len,
+ len += 2 * bin2hex ((gdb_byte *) argv[i], rs->buf.data () + len,
strlen (argv[i]));
}
}
rs->buf[len++] = '\0';
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_vRun]))
{
std::string encoded_value = bin2hex ((const gdb_byte *) value,
strlen (value));
- xsnprintf (rs->buf, get_remote_packet_size (),
+ xsnprintf (rs->buf.data (), get_remote_packet_size (),
"%s:%s", packet, encoded_value.c_str ());
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") != 0)
+ getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") != 0)
warning (_("Unable to %s environment variable '%s' on remote."),
action, value);
}
if (packet_support (PACKET_QEnvironmentReset) != PACKET_DISABLE)
{
putpkt ("QEnvironmentReset");
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") != 0)
+ getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") != 0)
warning (_("Unable to reset environment on remote."));
}
std::string hexpath = bin2hex ((const gdb_byte *) inferior_cwd,
strlen (inferior_cwd));
- xsnprintf (rs->buf, get_remote_packet_size (),
+ xsnprintf (rs->buf.data (), get_remote_packet_size (),
"QSetWorkingDir:%s", hexpath.c_str ());
}
else
{
/* An empty inferior_cwd means that the user wants us to
reset the remote server's inferior's cwd. */
- xsnprintf (rs->buf, get_remote_packet_size (),
+ xsnprintf (rs->buf.data (), get_remote_packet_size (),
"QSetWorkingDir:");
}
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_ok (rs->buf,
&remote_protocol_packets[PACKET_QSetWorkingDir])
!= PACKET_OK)
error (_("\
Remote replied unexpectedly while setting the inferior's working\n\
directory: %s"),
- rs->buf);
+ rs->buf.data ());
}
}
remote inferior using a shell. */
if (packet_support (PACKET_QStartupWithShell) != PACKET_DISABLE)
{
- xsnprintf (rs->buf, get_remote_packet_size (),
+ xsnprintf (rs->buf.data (), get_remote_packet_size (),
"QStartupWithShell:%d", startup_with_shell ? 1 : 0);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") != 0)
+ getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") != 0)
error (_("\
Remote replied unexpectedly while setting startup-with-shell: %s"),
- rs->buf);
+ rs->buf.data ());
}
extended_remote_environment_support ();
if (remote_exec_file[0])
error (_("Remote target does not support \"set remote exec-file\""));
if (!args.empty ())
- error (_("Remote target does not support \"set args\" or run <ARGS>"));
+ error (_("Remote target does not support \"set args\" or run ARGS"));
/* Fall back to "R". */
extended_remote_restart ();
}
- if (!have_inferiors ())
- {
- /* Clean up from the last time we ran, before we mark the target
- running again. This will mark breakpoints uninserted, and
- get_offsets may insert breakpoints. */
- init_thread_list ();
- init_wait_for_inferior ();
- }
-
/* vRun's success return is a stop reply. */
- stop_reply = run_worked ? rs->buf : NULL;
+ stop_reply = run_worked ? rs->buf.data () : NULL;
add_current_inferior_and_thread (stop_reply);
/* Get updated offsets, if the stub uses qOffsets. */
set_general_process ();
rs = get_remote_state ();
- p = rs->buf;
- endbuf = rs->buf + get_remote_packet_size ();
+ p = rs->buf.data ();
+ endbuf = p + get_remote_packet_size ();
*(p++) = 'Z';
*(p++) = '0';
remote_add_target_side_commands (gdbarch, bp_tgt, p);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_Z0]))
{
if (packet_support (PACKET_Z0) != PACKET_DISABLE)
{
- char *p = rs->buf;
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *p = rs->buf.data ();
+ char *endbuf = p + get_remote_packet_size ();
/* Make sure the remote is pointing at the right process, if
necessary. */
xsnprintf (p, endbuf - p, ",%d", bp_tgt->kind);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
return (rs->buf[0] == 'E');
}
enum target_hw_bp_type type, struct expression *cond)
{
struct remote_state *rs = get_remote_state ();
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *endbuf = rs->buf.data () + get_remote_packet_size ();
char *p;
enum Z_packet_type packet = watchpoint_to_Z_packet (type);
if (!gdbarch_has_global_breakpoints (target_gdbarch ()))
set_general_process ();
- xsnprintf (rs->buf, endbuf - rs->buf, "Z%x,", packet);
- p = strchr (rs->buf, '\0');
+ xsnprintf (rs->buf.data (), endbuf - rs->buf.data (), "Z%x,", packet);
+ p = strchr (rs->buf.data (), '\0');
addr = remote_address_masked (addr);
p += hexnumstr (p, (ULONGEST) addr);
xsnprintf (p, endbuf - p, ",%x", len);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_Z0 + packet]))
{
enum target_hw_bp_type type, struct expression *cond)
{
struct remote_state *rs = get_remote_state ();
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *endbuf = rs->buf.data () + get_remote_packet_size ();
char *p;
enum Z_packet_type packet = watchpoint_to_Z_packet (type);
if (!gdbarch_has_global_breakpoints (target_gdbarch ()))
set_general_process ();
- xsnprintf (rs->buf, endbuf - rs->buf, "z%x,", packet);
- p = strchr (rs->buf, '\0');
+ xsnprintf (rs->buf.data (), endbuf - rs->buf.data (), "z%x,", packet);
+ p = strchr (rs->buf.data (), '\0');
addr = remote_address_masked (addr);
p += hexnumstr (p, (ULONGEST) addr);
xsnprintf (p, endbuf - p, ",%x", len);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_Z0 + packet]))
{
}
-int remote_hw_watchpoint_limit = -1;
-int remote_hw_watchpoint_length_limit = -1;
-int remote_hw_breakpoint_limit = -1;
+static int remote_hw_watchpoint_limit = -1;
+static int remote_hw_watchpoint_length_limit = -1;
+static int remote_hw_breakpoint_limit = -1;
int
remote_target::region_ok_for_hw_watchpoint (CORE_ADDR addr, int len)
set_general_process ();
rs = get_remote_state ();
- p = rs->buf;
- endbuf = rs->buf + get_remote_packet_size ();
+ p = rs->buf.data ();
+ endbuf = p + get_remote_packet_size ();
*(p++) = 'Z';
*(p++) = '1';
remote_add_target_side_commands (gdbarch, bp_tgt, p);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_Z1]))
{
case PACKET_ERROR:
if (rs->buf[1] == '.')
{
- message = strchr (rs->buf + 2, '.');
+ message = strchr (&rs->buf[2], '.');
if (message)
error (_("Remote failure reply: %s"), message + 1);
}
{
CORE_ADDR addr;
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *p = rs->buf.data ();
+ char *endbuf = p + get_remote_packet_size ();
if (packet_support (PACKET_Z1) == PACKET_DISABLE)
return -1;
xsnprintf (p, endbuf - p, ",%x", bp_tgt->kind);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_Z1]))
{
/* It doesn't make sense to use qCRC if the remote target is
connected but not running. */
- if (target_has_execution && packet_support (PACKET_qCRC) != PACKET_DISABLE)
+ if (target_has_execution ()
+ && packet_support (PACKET_qCRC) != PACKET_DISABLE)
{
enum packet_result result;
set_general_process ();
/* FIXME: assumes lma can fit into long. */
- xsnprintf (rs->buf, get_remote_packet_size (), "qCRC:%lx,%lx",
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "qCRC:%lx,%lx",
(long) lma, (long) size);
putpkt (rs->buf);
reply. */
host_crc = xcrc32 (data, size, 0xffffffff);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
result = packet_ok (rs->buf,
&remote_protocol_packets[PACKET_qCRC]);
if (read_only && (s->flags & SEC_READONLY) == 0)
continue; /* Skip writeable sections */
- size = bfd_get_section_size (s);
+ size = bfd_section_size (s);
if (size == 0)
continue; /* Skip zero-length section. */
- sectname = bfd_get_section_name (exec_bfd, s);
+ sectname = bfd_section_name (s);
if (args && strcmp (args, sectname) != 0)
continue; /* Not the section selected by user. */
return TARGET_XFER_E_IO;
/* Insert header. */
- i = snprintf (rs->buf, max_size,
+ i = snprintf (rs->buf.data (), max_size,
"qXfer:%s:write:%s:%s:",
object_name, annex ? annex : "",
phex_nz (offset, sizeof offset));
/* Escape as much data as fits into rs->buf. */
buf_len = remote_escape_output
- (writebuf, len, 1, (gdb_byte *) rs->buf + i, &max_size, max_size);
+ (writebuf, len, 1, (gdb_byte *) rs->buf.data () + i, &max_size, max_size);
- if (putpkt_binary (rs->buf, i + buf_len) < 0
- || getpkt_sane (&rs->buf, &rs->buf_size, 0) < 0
+ if (putpkt_binary (rs->buf.data (), i + buf_len) < 0
+ || getpkt_sane (&rs->buf, 0) < 0
|| packet_ok (rs->buf, packet) != PACKET_OK)
return TARGET_XFER_E_IO;
- unpack_varlen_hex (rs->buf, &n);
+ unpack_varlen_hex (rs->buf.data (), &n);
*xfered_len = n;
return (*xfered_len != 0) ? TARGET_XFER_OK : TARGET_XFER_EOF;
the target is free to respond with slightly less data. We subtract
five to account for the response type and the protocol frame. */
n = std::min<LONGEST> (get_remote_packet_size () - 5, len);
- snprintf (rs->buf, get_remote_packet_size () - 4, "qXfer:%s:read:%s:%s,%s",
+ snprintf (rs->buf.data (), get_remote_packet_size () - 4,
+ "qXfer:%s:read:%s:%s,%s",
object_name, annex ? annex : "",
phex_nz (offset, sizeof offset),
phex_nz (n, sizeof n));
return TARGET_XFER_E_IO;
rs->buf[0] = '\0';
- packet_len = getpkt_sane (&rs->buf, &rs->buf_size, 0);
+ packet_len = getpkt_sane (&rs->buf, 0);
if (packet_len < 0 || packet_ok (rs->buf, packet) != PACKET_OK)
return TARGET_XFER_E_IO;
if (rs->buf[0] != 'l' && rs->buf[0] != 'm')
- error (_("Unknown remote qXfer reply: %s"), rs->buf);
+ error (_("Unknown remote qXfer reply: %s"), rs->buf.data ());
/* 'm' means there is (or at least might be) more data after this
batch. That does not make sense unless there's at least one byte
error (_("Remote qXfer reply contained no data."));
/* Got some data. */
- i = remote_unescape_input ((gdb_byte *) rs->buf + 1,
+ i = remote_unescape_input ((gdb_byte *) rs->buf.data () + 1,
packet_len - 1, readbuf, n);
/* 'l' is an EOF marker, possibly including a final block of data,
/* If the remote target is connected but not running, we should
pass this request down to a lower stratum (e.g. the executable
file). */
- if (!target_has_execution)
+ if (!target_has_execution ())
return TARGET_XFER_EOF;
if (writebuf != NULL)
xfered_len);
}
- /* Handle SPU memory using qxfer packets. */
- if (object == TARGET_OBJECT_SPU)
- {
- if (readbuf)
- return remote_read_qxfer ("spu", annex, readbuf, offset, len,
- xfered_len, &remote_protocol_packets
- [PACKET_qXfer_spu_read]);
- else
- return remote_write_qxfer ("spu", annex, writebuf, offset, len,
- xfered_len, &remote_protocol_packets
- [PACKET_qXfer_spu_write]);
- }
-
/* Handle extra signal info using qxfer packets. */
if (object == TARGET_OBJECT_SIGNAL_INFO)
{
gdb_assert (annex != NULL);
gdb_assert (readbuf != NULL);
- p2 = rs->buf;
+ p2 = rs->buf.data ();
*p2++ = 'q';
*p2++ = query_type;
if (i < 0)
return TARGET_XFER_E_IO;
- getpkt (&rs->buf, &rs->buf_size, 0);
- strcpy ((char *) readbuf, rs->buf);
+ getpkt (&rs->buf, 0);
+ strcpy ((char *) readbuf, rs->buf.data ());
*xfered_len = strlen ((char *) readbuf);
return (*xfered_len != 0) ? TARGET_XFER_OK : TARGET_XFER_EOF;
int found;
ULONGEST found_addr;
+ auto read_memory = [=] (CORE_ADDR addr, gdb_byte *result, size_t len)
+ {
+ return (target_read (this, TARGET_OBJECT_MEMORY, NULL, result, addr, len)
+ == len);
+ };
+
/* Don't go to the target if we don't have to. This is done before
checking packet_config_support to avoid the possibility that a
success for this edge case means the facility works in
{
/* Target doesn't provided special support, fall back and use the
standard support (copy memory and do the search here). */
- return simple_search_memory (this, start_addr, search_space_len,
+ return simple_search_memory (read_memory, start_addr, search_space_len,
pattern, pattern_len, found_addrp);
}
set_general_process ();
/* Insert header. */
- i = snprintf (rs->buf, max_size,
+ i = snprintf (rs->buf.data (), max_size,
"qSearch:memory:%s;%s;",
phex_nz (start_addr, addr_size),
phex_nz (search_space_len, sizeof (search_space_len)));
/* Escape as much data as fits into rs->buf. */
escaped_pattern_len =
- remote_escape_output (pattern, pattern_len, 1, (gdb_byte *) rs->buf + i,
+ remote_escape_output (pattern, pattern_len, 1,
+ (gdb_byte *) rs->buf.data () + i,
&used_pattern_len, max_size);
/* Bail if the pattern is too large. */
if (used_pattern_len != pattern_len)
error (_("Pattern is too large to transmit to remote target."));
- if (putpkt_binary (rs->buf, i + escaped_pattern_len) < 0
- || getpkt_sane (&rs->buf, &rs->buf_size, 0) < 0
+ if (putpkt_binary (rs->buf.data (), i + escaped_pattern_len) < 0
+ || getpkt_sane (&rs->buf, 0) < 0
|| packet_ok (rs->buf, packet) != PACKET_OK)
{
/* The request may not have worked because the command is not
supported. If so, fall back to the simple way. */
if (packet_config_support (packet) == PACKET_DISABLE)
{
- return simple_search_memory (this, start_addr, search_space_len,
+ return simple_search_memory (read_memory, start_addr, search_space_len,
pattern, pattern_len, found_addrp);
}
return -1;
{
found = 1;
if (rs->buf[1] != ',')
- error (_("Unknown qSearch:memory reply: %s"), rs->buf);
- unpack_varlen_hex (rs->buf + 2, &found_addr);
+ error (_("Unknown qSearch:memory reply: %s"), rs->buf.data ());
+ unpack_varlen_hex (&rs->buf[2], &found_addr);
*found_addrp = found_addr;
}
else
- error (_("Unknown qSearch:memory reply: %s"), rs->buf);
+ error (_("Unknown qSearch:memory reply: %s"), rs->buf.data ());
return found;
}
remote_target::rcmd (const char *command, struct ui_file *outbuf)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
if (!rs->remote_desc)
error (_("remote rcmd is only available after target open"));
command = "";
/* The query prefix. */
- strcpy (rs->buf, "qRcmd,");
- p = strchr (rs->buf, '\0');
+ strcpy (rs->buf.data (), "qRcmd,");
+ p = strchr (rs->buf.data (), '\0');
- if ((strlen (rs->buf) + strlen (command) * 2 + 8/*misc*/)
+ if ((strlen (rs->buf.data ()) + strlen (command) * 2 + 8/*misc*/)
> get_remote_packet_size ())
error (_("\"monitor\" command ``%s'' is too long."), command);
/* XXX - see also remote_get_noisy_reply(). */
QUIT; /* Allow user to bail out with ^C. */
rs->buf[0] = '\0';
- if (getpkt_sane (&rs->buf, &rs->buf_size, 0) == -1)
+ if (getpkt_sane (&rs->buf, 0) == -1)
{
/* Timeout. Continue to (try to) read responses.
This is better than stopping with an error, assuming the stub
an effect similar to stop on timeout. */
continue;
}
- buf = rs->buf;
+ buf = rs->buf.data ();
if (buf[0] == '\0')
error (_("Target does not support this command."));
if (buf[0] == 'O' && buf[1] != 'K')
remote_state *rs = get_remote_state ();
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
puts_filtered ("received: ");
- print_packet (rs->buf);
+ print_packet (rs->buf.data ());
puts_filtered ("\n");
}
{
char hexid[20];
- pack_threadid (&hexid[0], ref); /* Convert threead id into hex. */
+ pack_threadid (&hexid[0], ref); /* Convert thread id into hex. */
hexid[16] = 0;
printf_filtered ("%s %s\n", title, (&hexid[0]));
}
{
add_com ("tlist", class_obscure, threadlist_test_cmd,
_("Fetch and print the remote list of "
- "thread identifiers, one pkt only"));
+ "thread identifiers, one pkt only."));
add_com ("tinfo", class_obscure, threadinfo_test_cmd,
- _("Fetch and display info about one thread"));
+ _("Fetch and display info about one thread."));
add_com ("tset", class_obscure, threadset_test_cmd,
- _("Test setting to a different thread"));
+ _("Test setting to a different thread."));
add_com ("tupd", class_obscure, threadlist_update_test_cmd,
- _("Iterate through updating all remote thread info"));
+ _("Iterate through updating all remote thread info."));
add_com ("talive", class_obscure, threadalive_test,
- _(" Remote thread alive test "));
+ _("Remote thread alive test."));
}
#endif /* 0 */
-/* Convert a thread ID to a string. Returns the string in a static
- buffer. */
+/* Convert a thread ID to a string. */
-const char *
+std::string
remote_target::pid_to_str (ptid_t ptid)
{
- static char buf[64];
struct remote_state *rs = get_remote_state ();
if (ptid == null_ptid)
attached to a process, and reporting yes to qAttached, hence
no smart special casing here. */
if (!remote_multi_process_p (rs))
- {
- xsnprintf (buf, sizeof buf, "Remote target");
- return buf;
- }
+ return "Remote target";
return normal_pid_to_str (ptid);
}
else
{
if (magic_null_ptid == ptid)
- xsnprintf (buf, sizeof buf, "Thread <main>");
+ return "Thread <main>";
else if (remote_multi_process_p (rs))
if (ptid.lwp () == 0)
return normal_pid_to_str (ptid);
else
- xsnprintf (buf, sizeof buf, "Thread %d.%ld",
- ptid.pid (), ptid.lwp ());
+ return string_printf ("Thread %d.%ld",
+ ptid.pid (), ptid.lwp ());
else
- xsnprintf (buf, sizeof buf, "Thread %ld",
- ptid.lwp ());
- return buf;
+ return string_printf ("Thread %ld", ptid.lwp ());
}
}
if (packet_support (PACKET_qGetTLSAddr) != PACKET_DISABLE)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
- char *endp = rs->buf + get_remote_packet_size ();
+ char *p = rs->buf.data ();
+ char *endp = p + get_remote_packet_size ();
enum packet_result result;
strcpy (p, "qGetTLSAddr:");
*p++ = '\0';
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
result = packet_ok (rs->buf,
&remote_protocol_packets[PACKET_qGetTLSAddr]);
if (result == PACKET_OK)
{
- ULONGEST result;
+ ULONGEST addr;
- unpack_varlen_hex (rs->buf, &result);
- return result;
+ unpack_varlen_hex (rs->buf.data (), &addr);
+ return addr;
}
else if (result == PACKET_UNKNOWN)
throw_error (TLS_GENERIC_ERROR,
if (packet_support (PACKET_qGetTIBAddr) != PACKET_DISABLE)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
- char *endp = rs->buf + get_remote_packet_size ();
+ char *p = rs->buf.data ();
+ char *endp = p + get_remote_packet_size ();
enum packet_result result;
strcpy (p, "qGetTIBAddr:");
*p++ = '\0';
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
result = packet_ok (rs->buf,
&remote_protocol_packets[PACKET_qGetTIBAddr]);
if (result == PACKET_OK)
{
- ULONGEST result;
-
- unpack_varlen_hex (rs->buf, &result);
+ ULONGEST val;
+ unpack_varlen_hex (rs->buf.data (), &val);
if (addr)
- *addr = (CORE_ADDR) result;
+ *addr = (CORE_ADDR) val;
return true;
}
else if (result == PACKET_UNKNOWN)
struct remote_g_packet_guess
{
+ remote_g_packet_guess (int bytes_, const struct target_desc *tdesc_)
+ : bytes (bytes_),
+ tdesc (tdesc_)
+ {
+ }
+
int bytes;
const struct target_desc *tdesc;
};
-typedef struct remote_g_packet_guess remote_g_packet_guess_s;
-DEF_VEC_O(remote_g_packet_guess_s);
-struct remote_g_packet_data
+struct remote_g_packet_data : public allocate_on_obstack
{
- VEC(remote_g_packet_guess_s) *guesses;
+ std::vector<remote_g_packet_guess> guesses;
};
static struct gdbarch_data *remote_g_packet_data_handle;
static void *
remote_g_packet_data_init (struct obstack *obstack)
{
- return OBSTACK_ZALLOC (obstack, struct remote_g_packet_data);
+ return new (obstack) remote_g_packet_data;
}
void
struct remote_g_packet_data *data
= ((struct remote_g_packet_data *)
gdbarch_data (gdbarch, remote_g_packet_data_handle));
- struct remote_g_packet_guess new_guess, *guess;
- int ix;
gdb_assert (tdesc != NULL);
- for (ix = 0;
- VEC_iterate (remote_g_packet_guess_s, data->guesses, ix, guess);
- ix++)
- if (guess->bytes == bytes)
+ for (const remote_g_packet_guess &guess : data->guesses)
+ if (guess.bytes == bytes)
internal_error (__FILE__, __LINE__,
_("Duplicate g packet description added for size %d"),
bytes);
- new_guess.bytes = bytes;
- new_guess.tdesc = tdesc;
- VEC_safe_push (remote_g_packet_guess_s, data->guesses, &new_guess);
+ data->guesses.emplace_back (bytes, tdesc);
}
-/* Return 1 if remote_read_description would do anything on this target
- and architecture, 0 otherwise. */
+/* Return true if remote_read_description would do anything on this target
+ and architecture, false otherwise. */
-static int
+static bool
remote_read_description_p (struct target_ops *target)
{
struct remote_g_packet_data *data
= ((struct remote_g_packet_data *)
gdbarch_data (target_gdbarch (), remote_g_packet_data_handle));
- if (!VEC_empty (remote_g_packet_guess_s, data->guesses))
- return 1;
-
- return 0;
+ return !data->guesses.empty ();
}
const struct target_desc *
/* Do not try this during initial connection, when we do not know
whether there is a running but stopped thread. */
- if (!target_has_execution || inferior_ptid == null_ptid)
+ if (!target_has_execution () || inferior_ptid == null_ptid)
return beneath ()->read_description ();
- if (!VEC_empty (remote_g_packet_guess_s, data->guesses))
+ if (!data->guesses.empty ())
{
- struct remote_g_packet_guess *guess;
- int ix;
int bytes = send_g_packet ();
- for (ix = 0;
- VEC_iterate (remote_g_packet_guess_s, data->guesses, ix, guess);
- ix++)
- if (guess->bytes == bytes)
- return guess->tdesc;
+ for (const remote_g_packet_guess &guess : data->guesses)
+ if (guess.bytes == bytes)
+ return guess.tdesc;
/* We discard the g packet. A minor optimization would be to
hold on to it, and fill the register cache once we have selected
return -1;
}
- putpkt_binary (rs->buf, command_bytes);
- bytes_read = getpkt_sane (&rs->buf, &rs->buf_size, 0);
+ putpkt_binary (rs->buf.data (), command_bytes);
+ bytes_read = getpkt_sane (&rs->buf, 0);
/* If it timed out, something is wrong. Don't try to parse the
buffer. */
break;
}
- if (remote_hostio_parse_result (rs->buf, &ret, remote_errno,
+ if (remote_hostio_parse_result (rs->buf.data (), &ret, remote_errno,
&attachment_tmp))
{
*remote_errno = FILEIO_EINVAL;
if (attachment_tmp != NULL)
{
*attachment = attachment_tmp;
- *attachment_len = bytes_read - (*attachment - rs->buf);
+ *attachment_len = bytes_read - (*attachment - rs->buf.data ());
}
return ret;
{
struct remote_state *rs = get_remote_state ();
int required_pid = (inf == NULL || inf->fake_pid_p) ? 0 : inf->pid;
- char *p = rs->buf;
+ char *p = rs->buf.data ();
int left = get_remote_packet_size () - 1;
char arg[9];
int ret;
xsnprintf (arg, sizeof (arg), "%x", required_pid);
remote_buffer_add_string (&p, &left, arg);
- ret = remote_hostio_send_command (p - rs->buf, PACKET_vFile_setfs,
+ ret = remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_setfs,
remote_errno, NULL, NULL);
if (packet_support (PACKET_vFile_setfs) == PACKET_DISABLE)
int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
int left = get_remote_packet_size () - 1;
if (warn_if_slow)
remote_buffer_add_int (&p, &left, mode);
- return remote_hostio_send_command (p - rs->buf, PACKET_vFile_open,
+ return remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_open,
remote_errno, NULL, NULL);
}
ULONGEST offset, int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
int left = get_remote_packet_size ();
int out_len;
remote_buffer_add_string (&p, &left, ",");
p += remote_escape_output (write_buf, len, 1, (gdb_byte *) p, &out_len,
- get_remote_packet_size () - (p - rs->buf));
+ (get_remote_packet_size ()
+ - (p - rs->buf.data ())));
- return remote_hostio_send_command (p - rs->buf, PACKET_vFile_pwrite,
+ return remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_pwrite,
remote_errno, NULL, NULL);
}
ULONGEST offset, int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
char *attachment;
int left = get_remote_packet_size ();
int ret, attachment_len;
remote_buffer_add_int (&p, &left, offset);
- ret = remote_hostio_send_command (p - rs->buf, PACKET_vFile_pread,
+ ret = remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_pread,
remote_errno, &attachment,
&attachment_len);
remote_target::remote_hostio_close (int fd, int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
int left = get_remote_packet_size () - 1;
rs->readahead_cache.invalidate_fd (fd);
remote_buffer_add_int (&p, &left, fd);
- return remote_hostio_send_command (p - rs->buf, PACKET_vFile_close,
+ return remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_close,
remote_errno, NULL, NULL);
}
int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
int left = get_remote_packet_size () - 1;
if (remote_hostio_set_filesystem (inf, remote_errno) != 0)
remote_buffer_add_bytes (&p, &left, (const gdb_byte *) filename,
strlen (filename));
- return remote_hostio_send_command (p - rs->buf, PACKET_vFile_unlink,
+ return remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_unlink,
remote_errno, NULL, NULL);
}
int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
char *attachment;
int left = get_remote_packet_size ();
int len, attachment_len;
remote_buffer_add_bytes (&p, &left, (const gdb_byte *) filename,
strlen (filename));
- len = remote_hostio_send_command (p - rs->buf, PACKET_vFile_readlink,
+ len = remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_readlink,
remote_errno, &attachment,
&attachment_len);
remote_target::fileio_fstat (int fd, struct stat *st, int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
int left = get_remote_packet_size ();
int attachment_len, ret;
char *attachment;
remote_buffer_add_int (&p, &left, fd);
- ret = remote_hostio_send_command (p - rs->buf, PACKET_vFile_fstat,
+ ret = remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_fstat,
remote_errno, &attachment,
&attachment_len);
if (ret < 0)
DISABLE_COPY_AND_ASSIGN (scoped_remote_fd);
/* Release ownership of the file descriptor, and return it. */
- int release () noexcept
+ ATTRIBUTE_UNUSED_RESULT int release () noexcept
{
int fd = m_fd;
m_fd = -1;
remote_file_delete (argv[0], from_tty);
}
-static void
-remote_command (const char *args, int from_tty)
-{
- help_list (remote_cmdlist, "remote ", all_commands, gdb_stdout);
-}
-
bool
remote_target::can_execute_reverse ()
{
putpkt ("QTinit");
remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK") != 0)
+ if (strcmp (rs->buf.data (), "OK") != 0)
error (_("Target does not support this command."));
}
for (cmd = cmds; cmd; cmd = cmd->next)
{
QUIT; /* Allow user to bail out with ^C. */
- strcpy (rs->buf, "QTDPsrc:");
+ strcpy (rs->buf.data (), "QTDPsrc:");
encode_source_string (num, addr, "cmd", cmd->line,
- rs->buf + strlen (rs->buf),
- rs->buf_size - strlen (rs->buf));
+ rs->buf.data () + strlen (rs->buf.data ()),
+ rs->buf.size () - strlen (rs->buf.data ()));
putpkt (rs->buf);
remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK"))
+ if (strcmp (rs->buf.data (), "OK"))
warning (_("Target does not support source download."));
if (cmd->control_type == while_control
remote_download_command_source (num, addr, cmd->body_list_0.get ());
QUIT; /* Allow user to bail out with ^C. */
- strcpy (rs->buf, "QTDPsrc:");
+ strcpy (rs->buf.data (), "QTDPsrc:");
encode_source_string (num, addr, "cmd", "end",
- rs->buf + strlen (rs->buf),
- rs->buf_size - strlen (rs->buf));
+ rs->buf.data () + strlen (rs->buf.data ()),
+ rs->buf.size () - strlen (rs->buf.data ()));
putpkt (rs->buf);
remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK"))
+ if (strcmp (rs->buf.data (), "OK"))
warning (_("Target does not support source download."));
}
}
void
remote_target::download_tracepoint (struct bp_location *loc)
{
-#define BUF_SIZE 2048
-
CORE_ADDR tpaddr;
char addrbuf[40];
- char buf[BUF_SIZE];
std::vector<std::string> tdp_actions;
std::vector<std::string> stepping_actions;
char *pkt;
struct breakpoint *b = loc->owner;
struct tracepoint *t = (struct tracepoint *) b;
struct remote_state *rs = get_remote_state ();
+ int ret;
+ const char *err_msg = _("Tracepoint packet too large for target.");
+ size_t size_left;
+
+ /* We use a buffer other than rs->buf because we'll build strings
+ across multiple statements, and other statements in between could
+ modify rs->buf. */
+ gdb::char_vector buf (get_remote_packet_size ());
encode_actions_rsp (loc, &tdp_actions, &stepping_actions);
tpaddr = loc->address;
- sprintf_vma (addrbuf, tpaddr);
- xsnprintf (buf, BUF_SIZE, "QTDP:%x:%s:%c:%lx:%x", b->number,
- addrbuf, /* address */
- (b->enable_state == bp_enabled ? 'E' : 'D'),
- t->step_count, t->pass_count);
+ strcpy (addrbuf, phex (tpaddr, sizeof (CORE_ADDR)));
+ ret = snprintf (buf.data (), buf.size (), "QTDP:%x:%s:%c:%lx:%x",
+ b->number, addrbuf, /* address */
+ (b->enable_state == bp_enabled ? 'E' : 'D'),
+ t->step_count, t->pass_count);
+
+ if (ret < 0 || ret >= buf.size ())
+ error ("%s", err_msg);
+
/* Fast tracepoints are mostly handled by the target, but we can
tell the target how big of an instruction block should be moved
around. */
{
if (gdbarch_fast_tracepoint_valid_at (loc->gdbarch, tpaddr,
NULL))
- xsnprintf (buf + strlen (buf), BUF_SIZE - strlen (buf), ":F%x",
- gdb_insn_length (loc->gdbarch, tpaddr));
+ {
+ size_left = buf.size () - strlen (buf.data ());
+ ret = snprintf (buf.data () + strlen (buf.data ()),
+ size_left, ":F%x",
+ gdb_insn_length (loc->gdbarch, tpaddr));
+
+ if (ret < 0 || ret >= size_left)
+ error ("%s", err_msg);
+ }
else
/* If it passed validation at definition but fails now,
something is very wrong. */
struct static_tracepoint_marker marker;
if (target_static_tracepoint_marker_at (tpaddr, &marker))
- strcat (buf, ":S");
+ {
+ size_left = buf.size () - strlen (buf.data ());
+ ret = snprintf (buf.data () + strlen (buf.data ()),
+ size_left, ":S");
+
+ if (ret < 0 || ret >= size_left)
+ error ("%s", err_msg);
+ }
else
error (_("Static tracepoint not valid during download"));
}
capabilities at definition time. */
if (remote_supports_cond_tracepoints ())
{
- agent_expr_up aexpr = gen_eval_for_expr (tpaddr, loc->cond.get ());
- xsnprintf (buf + strlen (buf), BUF_SIZE - strlen (buf), ":X%x,",
- aexpr->len);
- pkt = buf + strlen (buf);
+ agent_expr_up aexpr = gen_eval_for_expr (tpaddr,
+ loc->cond.get ());
+
+ size_left = buf.size () - strlen (buf.data ());
+
+ ret = snprintf (buf.data () + strlen (buf.data ()),
+ size_left, ":X%x,", aexpr->len);
+
+ if (ret < 0 || ret >= size_left)
+ error ("%s", err_msg);
+
+ size_left = buf.size () - strlen (buf.data ());
+
+ /* Two bytes to encode each aexpr byte, plus the terminating
+ null byte. */
+ if (aexpr->len * 2 + 1 > size_left)
+ error ("%s", err_msg);
+
+ pkt = buf.data () + strlen (buf.data ());
+
for (int ndx = 0; ndx < aexpr->len; ++ndx)
pkt = pack_hex_byte (pkt, aexpr->buf[ndx]);
*pkt = '\0';
}
if (b->commands || *default_collect)
- strcat (buf, "-");
- putpkt (buf);
+ {
+ size_left = buf.size () - strlen (buf.data ());
+
+ ret = snprintf (buf.data () + strlen (buf.data ()),
+ size_left, "-");
+
+ if (ret < 0 || ret >= size_left)
+ error ("%s", err_msg);
+ }
+
+ putpkt (buf.data ());
remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK"))
+ if (strcmp (rs->buf.data (), "OK"))
error (_("Target does not support tracepoints."));
/* do_single_steps (t); */
{
QUIT; /* Allow user to bail out with ^C. */
- bool has_more = (action_it != tdp_actions.end ()
+ bool has_more = ((action_it + 1) != tdp_actions.end ()
|| !stepping_actions.empty ());
- xsnprintf (buf, BUF_SIZE, "QTDP:-%x:%s:%s%c",
- b->number, addrbuf, /* address */
- action_it->c_str (),
- has_more ? '-' : 0);
- putpkt (buf);
+ ret = snprintf (buf.data (), buf.size (), "QTDP:-%x:%s:%s%c",
+ b->number, addrbuf, /* address */
+ action_it->c_str (),
+ has_more ? '-' : 0);
+
+ if (ret < 0 || ret >= buf.size ())
+ error ("%s", err_msg);
+
+ putpkt (buf.data ());
remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK"))
+ if (strcmp (rs->buf.data (), "OK"))
error (_("Error on target while setting tracepoints."));
}
- for (auto action_it = stepping_actions.begin ();
- action_it != stepping_actions.end (); action_it++)
- {
- QUIT; /* Allow user to bail out with ^C. */
-
- bool is_first = action_it == stepping_actions.begin ();
- bool has_more = action_it != stepping_actions.end ();
-
- xsnprintf (buf, BUF_SIZE, "QTDP:-%x:%s:%s%s%s",
- b->number, addrbuf, /* address */
- is_first ? "S" : "",
- action_it->c_str (),
- has_more ? "-" : "");
- putpkt (buf);
- remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK"))
- error (_("Error on target while setting tracepoints."));
- }
+ for (auto action_it = stepping_actions.begin ();
+ action_it != stepping_actions.end (); action_it++)
+ {
+ QUIT; /* Allow user to bail out with ^C. */
+
+ bool is_first = action_it == stepping_actions.begin ();
+ bool has_more = (action_it + 1) != stepping_actions.end ();
+
+ ret = snprintf (buf.data (), buf.size (), "QTDP:-%x:%s:%s%s%s",
+ b->number, addrbuf, /* address */
+ is_first ? "S" : "",
+ action_it->c_str (),
+ has_more ? "-" : "");
+
+ if (ret < 0 || ret >= buf.size ())
+ error ("%s", err_msg);
+
+ putpkt (buf.data ());
+ remote_get_noisy_reply ();
+ if (strcmp (rs->buf.data (), "OK"))
+ error (_("Error on target while setting tracepoints."));
+ }
if (packet_support (PACKET_TracepointSource) == PACKET_ENABLE)
{
if (b->location != NULL)
{
- strcpy (buf, "QTDPsrc:");
+ ret = snprintf (buf.data (), buf.size (), "QTDPsrc:");
+
+ if (ret < 0 || ret >= buf.size ())
+ error ("%s", err_msg);
+
encode_source_string (b->number, loc->address, "at",
event_location_to_string (b->location.get ()),
- buf + strlen (buf), 2048 - strlen (buf));
- putpkt (buf);
+ buf.data () + strlen (buf.data ()),
+ buf.size () - strlen (buf.data ()));
+ putpkt (buf.data ());
remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK"))
+ if (strcmp (rs->buf.data (), "OK"))
warning (_("Target does not support source download."));
}
if (b->cond_string)
{
- strcpy (buf, "QTDPsrc:");
+ ret = snprintf (buf.data (), buf.size (), "QTDPsrc:");
+
+ if (ret < 0 || ret >= buf.size ())
+ error ("%s", err_msg);
+
encode_source_string (b->number, loc->address,
- "cond", b->cond_string, buf + strlen (buf),
- 2048 - strlen (buf));
- putpkt (buf);
+ "cond", b->cond_string,
+ buf.data () + strlen (buf.data ()),
+ buf.size () - strlen (buf.data ()));
+ putpkt (buf.data ());
remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK"))
+ if (strcmp (rs->buf.data (), "OK"))
warning (_("Target does not support source download."));
}
remote_download_command_source (b->number, loc->address,
struct remote_state *rs = get_remote_state ();
char *p;
- xsnprintf (rs->buf, get_remote_packet_size (), "QTDV:%x:%s:%x:",
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "QTDV:%x:%s:%x:",
tsv.number, phex ((ULONGEST) tsv.initial_value, 8),
tsv.builtin);
- p = rs->buf + strlen (rs->buf);
- if ((p - rs->buf) + tsv.name.length () * 2 >= get_remote_packet_size ())
+ p = rs->buf.data () + strlen (rs->buf.data ());
+ if ((p - rs->buf.data ()) + tsv.name.length () * 2
+ >= get_remote_packet_size ())
error (_("Trace state variable name too long for tsv definition packet"));
p += 2 * bin2hex ((gdb_byte *) (tsv.name.data ()), p, tsv.name.length ());
*p++ = '\0';
putpkt (rs->buf);
remote_get_noisy_reply ();
- if (*rs->buf == '\0')
+ if (rs->buf[0] == '\0')
error (_("Target does not support this command."));
- if (strcmp (rs->buf, "OK") != 0)
+ if (strcmp (rs->buf.data (), "OK") != 0)
error (_("Error on target while downloading trace state variable."));
}
remote_target::enable_tracepoint (struct bp_location *location)
{
struct remote_state *rs = get_remote_state ();
- char addr_buf[40];
- sprintf_vma (addr_buf, location->address);
- xsnprintf (rs->buf, get_remote_packet_size (), "QTEnable:%x:%s",
- location->owner->number, addr_buf);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "QTEnable:%x:%s",
+ location->owner->number,
+ phex (location->address, sizeof (CORE_ADDR)));
putpkt (rs->buf);
remote_get_noisy_reply ();
- if (*rs->buf == '\0')
+ if (rs->buf[0] == '\0')
error (_("Target does not support enabling tracepoints while a trace run is ongoing."));
- if (strcmp (rs->buf, "OK") != 0)
+ if (strcmp (rs->buf.data (), "OK") != 0)
error (_("Error on target while enabling tracepoint."));
}
remote_target::disable_tracepoint (struct bp_location *location)
{
struct remote_state *rs = get_remote_state ();
- char addr_buf[40];
- sprintf_vma (addr_buf, location->address);
- xsnprintf (rs->buf, get_remote_packet_size (), "QTDisable:%x:%s",
- location->owner->number, addr_buf);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "QTDisable:%x:%s",
+ location->owner->number,
+ phex (location->address, sizeof (CORE_ADDR)));
putpkt (rs->buf);
remote_get_noisy_reply ();
- if (*rs->buf == '\0')
+ if (rs->buf[0] == '\0')
error (_("Target does not support disabling tracepoints while a trace run is ongoing."));
- if (strcmp (rs->buf, "OK") != 0)
+ if (strcmp (rs->buf.data (), "OK") != 0)
error (_("Error on target while disabling tracepoint."));
}
remote_target::trace_set_readonly_regions ()
{
asection *s;
- bfd *abfd = NULL;
bfd_size_type size;
bfd_vma vma;
int anysecs = 0;
struct remote_state *rs = get_remote_state ();
- strcpy (rs->buf, "QTro");
- offset = strlen (rs->buf);
+ strcpy (rs->buf.data (), "QTro");
+ offset = strlen (rs->buf.data ());
for (s = exec_bfd->sections; s; s = s->next)
{
char tmp1[40], tmp2[40];
continue;
anysecs = 1;
- vma = bfd_get_section_vma (abfd, s);
- size = bfd_get_section_size (s);
+ vma = bfd_section_vma (s);
+ size = bfd_section_size (s);
sprintf_vma (tmp1, vma);
sprintf_vma (tmp2, vma + size);
sec_length = 1 + strlen (tmp1) + 1 + strlen (tmp2);
- if (offset + sec_length + 1 > rs->buf_size)
+ if (offset + sec_length + 1 > rs->buf.size ())
{
if (packet_support (PACKET_qXfer_traceframe_info) != PACKET_ENABLE)
warning (_("\
Too many sections for read-only sections definition packet."));
break;
}
- xsnprintf (rs->buf + offset, rs->buf_size - offset, ":%s,%s",
+ xsnprintf (rs->buf.data () + offset, rs->buf.size () - offset, ":%s,%s",
tmp1, tmp2);
offset += sec_length;
}
if (anysecs)
{
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
}
}
putpkt ("QTStart");
remote_get_noisy_reply ();
- if (*rs->buf == '\0')
+ if (rs->buf[0] == '\0')
error (_("Target does not support this command."));
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Bogus reply from target: %s"), rs->buf);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Bogus reply from target: %s"), rs->buf.data ());
}
int
{
/* Initialize it just to avoid a GCC false warning. */
char *p = NULL;
- /* FIXME we need to get register block size some other way. */
- extern int trace_regblock_size;
enum packet_result result;
struct remote_state *rs = get_remote_state ();
if (packet_support (PACKET_qTStatus) == PACKET_DISABLE)
return -1;
+ /* FIXME we need to get register block size some other way. */
trace_regblock_size
= rs->get_remote_arch_state (target_gdbarch ())->sizeof_g_packet;
putpkt ("qTStatus");
- TRY
+ try
{
p = remote_get_noisy_reply ();
}
- CATCH (ex, RETURN_MASK_ERROR)
+ catch (const gdb_exception_error &ex)
{
if (ex.error != TARGET_CLOSE_ERROR)
{
exception_fprintf (gdb_stderr, ex, "qTStatus: ");
return -1;
}
- throw_exception (ex);
+ throw;
}
- END_CATCH
result = packet_ok (p, &remote_protocol_packets[PACKET_qTStatus]);
ts->filename = NULL;
if (*p++ != 'T')
- error (_("Bogus trace status reply from target: %s"), rs->buf);
+ error (_("Bogus trace status reply from target: %s"), rs->buf.data ());
/* Function 'parse_trace_status' sets default value of each field of
'ts' at first, so we don't have to do it here. */
any status. */
if (tp->number_on_target == 0)
continue;
- xsnprintf (rs->buf, size, "qTP:%x:%s", tp->number_on_target,
+ xsnprintf (rs->buf.data (), size, "qTP:%x:%s", tp->number_on_target,
phex_nz (loc->address, 0));
putpkt (rs->buf);
reply = remote_get_noisy_reply ();
{
utp->hit_count = 0;
utp->traceframe_usage = 0;
- xsnprintf (rs->buf, size, "qTP:%x:%s", utp->number,
+ xsnprintf (rs->buf.data (), size, "qTP:%x:%s", utp->number,
phex_nz (utp->addr, 0));
putpkt (rs->buf);
reply = remote_get_noisy_reply ();
putpkt ("QTStop");
remote_get_noisy_reply ();
- if (*rs->buf == '\0')
+ if (rs->buf[0] == '\0')
error (_("Target does not support this command."));
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Bogus reply from target: %s"), rs->buf);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Bogus reply from target: %s"), rs->buf.data ());
}
int
int *tpp)
{
struct remote_state *rs = get_remote_state ();
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *endbuf = rs->buf.data () + get_remote_packet_size ();
char *p, *reply;
int target_frameno = -1, target_tracept = -1;
if (type != tfind_number)
set_remote_traceframe ();
- p = rs->buf;
+ p = rs->buf.data ();
strcpy (p, "QTFrame:");
p = strchr (p, '\0');
switch (type)
set_remote_traceframe ();
- xsnprintf (rs->buf, get_remote_packet_size (), "qTV:%x", tsvnum);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "qTV:%x", tsvnum);
putpkt (rs->buf);
reply = remote_get_noisy_reply ();
if (reply && *reply)
struct remote_state *rs = get_remote_state ();
char *p, *reply;
- p = rs->buf;
+ p = rs->buf.data ();
strcpy (p, "QTSave:");
p += strlen (p);
- if ((p - rs->buf) + strlen (filename) * 2 >= get_remote_packet_size ())
+ if ((p - rs->buf.data ()) + strlen (filename) * 2
+ >= get_remote_packet_size ())
error (_("Remote file name too long for trace save packet"));
p += 2 * bin2hex ((gdb_byte *) filename, p, strlen (filename));
*p++ = '\0';
char *p;
int rslt;
- p = rs->buf;
+ p = rs->buf.data ();
strcpy (p, "qTBuffer:");
p += strlen (p);
p += hexnumstr (p, offset);
{
char *reply;
- xsnprintf (rs->buf, get_remote_packet_size (), "QTDisconnected:%x", val);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (),
+ "QTDisconnected:%x", val);
putpkt (rs->buf);
reply = remote_get_noisy_reply ();
if (*reply == '\0')
int
remote_target::core_of_thread (ptid_t ptid)
{
- struct thread_info *info = find_thread_ptid (ptid);
+ thread_info *info = find_thread_ptid (this, ptid);
if (info != NULL && info->priv != NULL)
return get_remote_thread_info (info)->core;
struct remote_state *rs = get_remote_state ();
char *reply;
- xsnprintf (rs->buf, get_remote_packet_size (), "QTBuffer:circular:%x", val);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (),
+ "QTBuffer:circular:%x", val);
putpkt (rs->buf);
reply = remote_get_noisy_reply ();
if (*reply == '\0')
/* If we're not debugging a process yet, the IPA can't be
loaded. */
- if (!target_has_execution)
+ if (!target_has_execution ())
return 0;
/* Make sure the remote is pointing at the right process. */
set_general_process ();
- xsnprintf (rs->buf, get_remote_packet_size (), "qTMinFTPILen");
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "qTMinFTPILen");
putpkt (rs->buf);
reply = remote_get_noisy_reply ();
if (*reply == '\0')
if (packet_support (PACKET_QTBuffer_size) != PACKET_DISABLE)
{
struct remote_state *rs = get_remote_state ();
- char *buf = rs->buf;
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *buf = rs->buf.data ();
+ char *endbuf = buf + get_remote_packet_size ();
enum packet_result result;
gdb_assert (val >= 0 || val == -1);
&remote_protocol_packets[PACKET_QTBuffer_size]);
if (result != PACKET_OK)
- warning (_("Bogus reply from target: %s"), rs->buf);
+ warning (_("Bogus reply from target: %s"), rs->buf.data ());
}
}
{
struct remote_state *rs = get_remote_state ();
char *reply;
- char *buf = rs->buf;
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *buf = rs->buf.data ();
+ char *endbuf = buf + get_remote_packet_size ();
int nbytes;
buf += xsnprintf (buf, endbuf - buf, "QTNotes:");
struct remote_state *rs = get_remote_state ();
/* If the stub supports QAgent. */
- xsnprintf (rs->buf, get_remote_packet_size (), "QAgent:%d", use);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "QAgent:%d", use);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
- if (strcmp (rs->buf, "OK") == 0)
+ if (strcmp (rs->buf.data (), "OK") == 0)
{
::use_agent = use;
return true;
char *buf, *pos, *endbuf;
rs = get_remote_state ();
- buf = rs->buf;
+ buf = rs->buf.data ();
endbuf = buf + get_remote_packet_size ();
packet = &remote_protocol_packets[PACKET_Qbtrace_conf_bts_size];
conf->bts.size);
putpkt (buf);
- getpkt (&buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_ok (buf, packet) == PACKET_ERROR)
{
conf->pt.size);
putpkt (buf);
- getpkt (&buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_ok (buf, packet) == PACKET_ERROR)
{
remote_target::remote_btrace_maybe_reopen ()
{
struct remote_state *rs = get_remote_state ();
- struct thread_info *tp;
int btrace_target_pushed = 0;
+#if !defined (HAVE_LIBIPT)
int warned = 0;
+#endif
+
+ /* Don't bother walking the entirety of the remote thread list when
+ we know the feature isn't supported by the remote. */
+ if (packet_support (PACKET_qXfer_btrace_conf) != PACKET_ENABLE)
+ return;
scoped_restore_current_thread restore_thread;
- ALL_NON_EXITED_THREADS (tp)
+ for (thread_info *tp : all_non_exited_threads (this))
{
set_general_thread (tp->ptid);
struct btrace_target_info *tinfo = NULL;
struct packet_config *packet = NULL;
struct remote_state *rs = get_remote_state ();
- char *buf = rs->buf;
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *buf = rs->buf.data ();
+ char *endbuf = buf + get_remote_packet_size ();
switch (conf->format)
{
buf += xsnprintf (buf, endbuf - buf, "%s", packet->name);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_ok (rs->buf, packet) == PACKET_ERROR)
{
if (rs->buf[0] == 'E' && rs->buf[1] == '.')
error (_("Could not enable branch tracing for %s: %s"),
- target_pid_to_str (ptid), rs->buf + 2);
+ target_pid_to_str (ptid).c_str (), &rs->buf[2]);
else
error (_("Could not enable branch tracing for %s."),
- target_pid_to_str (ptid));
+ target_pid_to_str (ptid).c_str ());
}
tinfo = XCNEW (struct btrace_target_info);
/* If we fail to read the configuration, we lose some information, but the
tracing itself is not impacted. */
- TRY
+ try
{
btrace_read_config (&tinfo->conf);
}
- CATCH (err, RETURN_MASK_ERROR)
+ catch (const gdb_exception_error &err)
{
if (err.message != NULL)
- warning ("%s", err.message);
+ warning ("%s", err.what ());
}
- END_CATCH
return tinfo;
}
{
struct packet_config *packet = &remote_protocol_packets[PACKET_Qbtrace_off];
struct remote_state *rs = get_remote_state ();
- char *buf = rs->buf;
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *buf = rs->buf.data ();
+ char *endbuf = buf + get_remote_packet_size ();
if (packet_config_support (packet) != PACKET_ENABLE)
error (_("Target does not support branch tracing."));
buf += xsnprintf (buf, endbuf - buf, "%s", packet->name);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_ok (rs->buf, packet) == PACKET_ERROR)
{
if (rs->buf[0] == 'E' && rs->buf[1] == '.')
error (_("Could not disable branch tracing for %s: %s"),
- target_pid_to_str (tinfo->ptid), rs->buf + 2);
+ target_pid_to_str (tinfo->ptid).c_str (), &rs->buf[2]);
else
error (_("Could not disable branch tracing for %s."),
- target_pid_to_str (tinfo->ptid));
+ target_pid_to_str (tinfo->ptid).c_str ());
}
xfree (tinfo);
remote_target::pid_to_exec_file (int pid)
{
static gdb::optional<gdb::char_vector> filename;
- struct inferior *inf;
char *annex = NULL;
if (packet_support (PACKET_qXfer_exec_file) != PACKET_ENABLE)
return NULL;
- inf = find_inferior_pid (pid);
+ inferior *inf = find_inferior_pid (this, pid);
if (inf == NULL)
internal_error (__FILE__, __LINE__,
_("not currently attached to process %d"), pid);
int handle_len,
inferior *inf)
{
- struct thread_info *tp;
-
- ALL_NON_EXITED_THREADS (tp)
+ for (thread_info *tp : all_non_exited_threads (this))
{
remote_thread_info *priv = get_remote_thread_info (tp);
return NULL;
}
+gdb::byte_vector
+remote_target::thread_info_to_thread_handle (struct thread_info *tp)
+{
+ remote_thread_info *priv = get_remote_thread_info (tp);
+ return priv->thread_handle;
+}
+
bool
remote_target::can_async_p ()
{
{
/* Don't propogate error information up to the client. Instead let
the client find out about the error by querying the target. */
- inferior_event_handler (INF_REG_EVENT, NULL);
+ inferior_event_handler (INF_REG_EVENT);
}
static void
remote_async_inferior_event_handler (gdb_client_data data)
{
- inferior_event_handler (INF_REG_EVENT, data);
+ inferior_event_handler (INF_REG_EVENT);
+
+ remote_target *remote = (remote_target *) data;
+ remote_state *rs = remote->get_remote_state ();
+
+ /* inferior_event_handler may have consumed an event pending on the
+ infrun side without calling target_wait on the REMOTE target, or
+ may have pulled an event out of a different target. Keep trying
+ for this remote target as long it still has either pending events
+ or unacknowledged notifications. */
+
+ if (rs->notif_state->pending_event[notif_client_stop.id] != NULL
+ || !rs->stop_reply_queue.empty ())
+ mark_async_event_handler (rs->remote_async_inferior_event_token);
+}
+
+int
+remote_target::async_wait_fd ()
+{
+ struct remote_state *rs = get_remote_state ();
+ return rs->remote_desc->fd;
}
void
if (packet_support (PACKET_QThreadEvents) == PACKET_DISABLE)
return;
- xsnprintf (rs->buf, size, "QThreadEvents:%x", enable ? 1 : 0);
+ xsnprintf (rs->buf.data (), size, "QThreadEvents:%x", enable ? 1 : 0);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf,
&remote_protocol_packets[PACKET_QThreadEvents]))
{
case PACKET_OK:
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Remote refused setting thread events: %s"), rs->buf);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Remote refused setting thread events: %s"), rs->buf.data ());
break;
case PACKET_ERROR:
- warning (_("Remote failure reply: %s"), rs->buf);
+ warning (_("Remote failure reply: %s"), rs->buf.data ());
break;
case PACKET_UNKNOWN:
break;
}
}
-static void
-set_remote_cmd (const char *args, int from_tty)
-{
- help_list (remote_set_cmdlist, "set remote ", all_commands, gdb_stdout);
-}
-
static void
show_remote_cmd (const char *args, int from_tty)
{
/* Ask for a first packet of tracepoint definition. */
putpkt ("qTfP");
- getpkt (&rs->buf, &rs->buf_size, 0);
- p = rs->buf;
+ getpkt (&rs->buf, 0);
+ p = rs->buf.data ();
while (*p && *p != 'l')
{
parse_tracepoint_definition (p, utpp);
/* Ask for another packet of tracepoint definition. */
putpkt ("qTsP");
- getpkt (&rs->buf, &rs->buf_size, 0);
- p = rs->buf;
+ getpkt (&rs->buf, 0);
+ p = rs->buf.data ();
}
return 0;
}
/* Ask for a first packet of variable definition. */
putpkt ("qTfV");
- getpkt (&rs->buf, &rs->buf_size, 0);
- p = rs->buf;
+ getpkt (&rs->buf, 0);
+ p = rs->buf.data ();
while (*p && *p != 'l')
{
parse_tsv_definition (p, utsvp);
/* Ask for another packet of variable definition. */
putpkt ("qTsV");
- getpkt (&rs->buf, &rs->buf_size, 0);
- p = rs->buf;
+ getpkt (&rs->buf, 0);
+ p = rs->buf.data ();
}
return 0;
}
}
}
+void _initialize_remote ();
void
-_initialize_remote (void)
+_initialize_remote ()
{
struct cmd_list_element *cmd;
const char *cmd_name;
remote_g_packet_data_handle =
gdbarch_data_register_pre_init (remote_g_packet_data_init);
- remote_pspace_data
- = register_program_space_data_with_cleanup (NULL,
- remote_pspace_data_cleanup);
-
add_target (remote_target_info, remote_target::open);
add_target (extended_remote_target_info, extended_remote_target::open);
/* set/show remote ... */
- add_prefix_cmd ("remote", class_maintenance, set_remote_cmd, _("\
-Remote protocol specific variables\n\
+ add_basic_prefix_cmd ("remote", class_maintenance, _("\
+Remote protocol specific variables.\n\
Configure various remote-protocol specific variables such as\n\
-the packets being used"),
- &remote_set_cmdlist, "set remote ",
- 0 /* allow-unknown */, &setlist);
+the packets being used."),
+ &remote_set_cmdlist, "set remote ",
+ 0 /* allow-unknown */, &setlist);
add_prefix_cmd ("remote", class_maintenance, show_remote_cmd, _("\
-Remote protocol specific variables\n\
+Remote protocol specific variables.\n\
Configure various remote-protocol specific variables such as\n\
-the packets being used"),
+the packets being used."),
&remote_show_cmdlist, "show remote ",
0 /* allow-unknown */, &showlist);
set_remotebreak, show_remotebreak,
&setlist, &showlist);
cmd_name = "remotebreak";
- cmd = lookup_cmd (&cmd_name, setlist, "", -1, 1);
+ cmd = lookup_cmd (&cmd_name, setlist, "", NULL, -1, 1);
deprecate_cmd (cmd, "set remote interrupt-sequence");
cmd_name = "remotebreak"; /* needed because lookup_cmd updates the pointer */
- cmd = lookup_cmd (&cmd_name, showlist, "", -1, 1);
+ cmd = lookup_cmd (&cmd_name, showlist, "", NULL, -1, 1);
deprecate_cmd (cmd, "show remote interrupt-sequence");
add_setshow_enum_cmd ("interrupt-sequence", class_support,
add_setshow_boolean_cmd ("interrupt-on-connect", class_support,
&interrupt_on_connect, _("\
-Set whether interrupt-sequence is sent to remote target when gdb connects to."), _(" \
-Show whether interrupt-sequence is sent to remote target when gdb connects to."), _(" \
+Set whether interrupt-sequence is sent to remote target when gdb connects to."), _("\
+Show whether interrupt-sequence is sent to remote target when gdb connects to."), _("\
If set, interrupt sequence is sent to remote target."),
NULL, NULL,
&remote_set_cmdlist, &remote_show_cmdlist);
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_memory_map],
"qXfer:memory-map:read", "memory-map", 0);
- add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_spu_read],
- "qXfer:spu:read", "read-spu-object", 0);
-
- add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_spu_write],
- "qXfer:spu:write", "write-spu-object", 0);
-
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_osdata],
"qXfer:osdata:read", "osdata", 0);
documentation). */
add_setshow_auto_boolean_cmd ("Z-packet", class_obscure,
&remote_Z_packet_detect, _("\
-Set use of remote protocol `Z' packets"), _("\
-Show use of remote protocol `Z' packets "), _("\
+Set use of remote protocol `Z' packets."), _("\
+Show use of remote protocol `Z' packets."), _("\
When set, GDB will attempt to use the remote breakpoint and watchpoint\n\
packets."),
set_remote_protocol_Z_packet_cmd,
`Z' packets is %s. */
&remote_set_cmdlist, &remote_show_cmdlist);
- add_prefix_cmd ("remote", class_files, remote_command, _("\
-Manipulate files on the remote system\n\
+ add_basic_prefix_cmd ("remote", class_files, _("\
+Manipulate files on the remote system.\n\
Transfer files to and from the remote target system."),
- &remote_cmdlist, "remote ",
- 0 /* allow-unknown */, &cmdlist);
+ &remote_cmdlist, "remote ",
+ 0 /* allow-unknown */, &cmdlist);
add_cmd ("put", class_files, remote_put_command,
_("Copy a local file to the remote system."),
add_setshow_string_noescape_cmd ("exec-file", class_files,
&remote_exec_file_var, _("\
-Set the remote pathname for \"run\""), _("\
-Show the remote pathname for \"run\""), NULL,
+Set the remote pathname for \"run\"."), _("\
+Show the remote pathname for \"run\"."), NULL,
set_remote_exec_file,
show_remote_exec_file,
&remote_set_cmdlist,
&setlist,
&showlist);
- /* Eventually initialize fileio. See fileio.c */
- initialize_remote_fileio (remote_set_cmdlist, remote_show_cmdlist);
+ add_setshow_zinteger_cmd ("watchdog", class_maintenance, &watchdog, _("\
+Set watchdog timer."), _("\
+Show watchdog timer."), _("\
+When non-zero, this timeout is used instead of waiting forever for a target\n\
+to finish a low-level step or continue operation. If the specified amount\n\
+of time passes without a response from the target, an error occurs."),
+ NULL,
+ show_watchdog,
+ &setlist, &showlist);
+
+ add_setshow_zuinteger_unlimited_cmd ("remote-packet-max-chars", no_class,
+ &remote_packet_max_chars, _("\
+Set the maximum number of characters to display for each remote packet."), _("\
+Show the maximum number of characters to display for each remote packet."), _("\
+Specify \"unlimited\" to display all the characters."),
+ NULL, show_remote_packet_max_chars,
+ &setdebuglist, &showdebuglist);
- /* Take advantage of the fact that the TID field is not used, to tag
- special ptids with it set to != 0. */
- magic_null_ptid = ptid_t (42000, -1, 1);
- not_sent_ptid = ptid_t (42000, -2, 1);
- any_thread_ptid = ptid_t (42000, 0, 1);
+ /* Eventually initialize fileio. See fileio.c */
+ initialize_remote_fileio (&remote_set_cmdlist, &remote_show_cmdlist);
}
projects / binutils.git / blobdiff